* Allow protection of certain keys during camel_to_snake
Create an `ignore_list` parameter that preserves the case
of the contents of certain dictionaries. Most valuable
for `tags` but other uses might arise.
* Port ec2_vpc_route_table to boto3
Update tests to reflect fixes in boto3.
* Add RETURN documentation to ec2_vpc_route_table
* Update DOCUMENTATION to be valid yaml
* Add check mode tests
* Add aws_s3 integration tests for multipart GET operations
* Make multipart test platform-specific
* Use YAML anchors to simplify passing credentials
* Run tests on Linux and MacOSX
* Provide a way to explicitly invoke the debugger with in the debug strategy
* Merge the debugger strategy into StrategyBase
* Fix some logic, pin to a single result
* Make redo also continue
* Make sure that if the debug closure doesn't need to process the result, that we still return it
* Fix failing tests for the strategy
* Clean up messages from debugger and exit code to match bin/ansible
* Move the FieldAttribute higher, to apply at different levels
* make debugger a string, expand logic
* Better host state rollbacks
* More explicit debugger prompt
* ENABLE_TASK_DEBUGGER should be boolean, and better docs
* No bare except, add pprint, alias h, vars to task_vars
* _validate_debugger can ignore non-string, that can be caught later
* Address issue if there were no previous tasks/state, and use the correct key
* Update docs for changes to the debugger
* Guard against a stat going negative through use of decrement
* Add a few notes about using the debugger on the free strategy
* Add changelog entry for task debugger
* Add a few versionadded indicators and a note about vars -> task_vars
* Add test for unexpected egress rule in default VPC
When passing rules_egress to ec2_group, the default
egress rule shouldn't be created (if `purge_rules_egress`)
is set. Test this.
* Respect egress rule defintions for default VPC groups
When passing rules_egress and purge_rules_egress, the
default egress rule should not be created
Fixes#34429
* Change AWS credential passing to be YAML anchors
Vastly simplify the AWS tasks by reducing the credentials to a YAML
block
This fix adds rpm.error exception which is raised when
API unable to get envra information from RPM package.
Also, adds integration test for local_envra method.
Fixes: #30074
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Fix connection type in junos integration tests
* For find module in junos integration test
add connection type local and delegate task to localhost
* Fix review comment
* Add some integration tests for ec2_asg.
* Remove exception handling from ec2_asg boto3 connection since it is handled in boto3_conn().
* Update test failure assertions
* Use yaml anchor for credentials and remove unnecessary dependencies.
* Move AWS boto3 module credentials tests to separate target
* Remove filters from tests
* Add new module mlnxos_protocol for enabling disabling protocols on
MLNX-OS Mellanox network devices
Signed-off-by: Samer Deeb <samerd@mellanox.com>
* Fix Test Class name
* Fix IP routing protocol support
Signed-off-by: Samer Deeb <samerd@mellanox.com>
* Add missing support for check_mode, and Fix documentation
Signed-off-by: Samer Deeb <samerd@mellanox.com>
* Add connection=netconf in individual roles for modules that run using netconf connection
plugin
* Add connection=network_cli for junos_netconf and junos_command
at applicable places
* cs_network_offering: streamline docs a bit
* cs_network_offering: format traffic type as returned by API
* cs_network_offering: rename return to service_offering_id
* cs_network_offering: ensure absent tests don't require anyting else than name
* cs_network_offering: beautify the default_egress_policy param
* cs_network_offering: test enabling/disabling with existing syntax
* cs_network_offering: rename service_provider_list to service_providers
* cs_network_offering: allow update max_connections
* cs_network_offering: extend returns
* cs_network_offering: extend tests with max_connections
* cloudstack: rename cs_serviceoffer to cs_service_offering
* adjust references to old name
* cs_service_offering: fix limitcpuuse not handled
* minor docs fix
* update changelog
A bug in the parsing of single commands with commas
Token cleanup
Password argument now defaults to false
Addition of coding conventions from v3 conventions
This module can be used to add license offerings to a pool. This
is the second part required to license a remote device from a
BIG-IQ (the first being to create a pool with bigiq_regkey_pool)
* Don't use getattr in _get_parent_attribute to avoid recursion issues
Fixes#23609
* Move extend/prepend to field attribute
Also removes _get_attr* methods that were basically just calling
_get_parent_attribute because it needed to set those params.
Also modifies _get_parent_attribute() to pull those values from the
FieldAttributes instead of using the ones passed into the function.
* Better fixes for _get_parent_attribute
* Removes deprecated code from bigip_monitor_tcp
The deprecated code was moved into its own modules. We let it lay
here for a release, and now I'm removing it.
* Fixing upstreaming tests
This module can be used to create GTM servers (not to be confused with
GTM virtual servers) on a BIGIP. GTM servers are a component of the
datacenter, and GTM virtual servers are their members.
* basic.py: add mock to os.path.exists
* set_*_if_different: if check_mode enabled & file missing: set changed to True
Fixes#32676
Thanks to mscherer and Spredzy for the distributed triplet programming
session!
* galaxy unit tests: add missing program name
* galaxy unit tests: remove incorrect switchs
- 'install' action doesn't support '--offline' switch
- 'remove' action doesn't support '--init-path' switch
* Add integration test for missing attempts in until with failed/changed_when
* Extend tests to validate additional known behaviors of do-until loops
* Inject attempts into result earlier
This fix adds new module for managing various roles in
local ESXi server. Also, adds integration tests for this change.
Fixes: #27899
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
Code refactor to use f5 coding conventions. Removed deprecated
"enabled/disabled" params (this is now a state). Adds token cleanup
for cases where many api calls are made.
This refactors the bigip_virtual_server module to address several issues and
missing features. Additionally it adds tests and updates the coding standards
to the recent version used by f5. Finally, it removes deprecated items that
were announced in 2.4
* Readd zypper tests
The tests were reenabled in #33034, but some tests were removed.
Readd the tests in a mostly distro-version-independent way.
* Remove with_items and use native yaml
* Dynamically determine test URL
This fix adds support for Virtual Machine resource allocation
information. This information is related to limit and reserve CPU and Memory
of virtual machine.
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* mutually_exclusive add - ios_config parents works with lines by not src
* mutually_execlusive parents,src added to all other net modules
* tests for mutually_exclusive parents,src and whitespce removal
* obscure type promotion issue in some versions of Powershell causes [int]::MaxValue to be promoted to [int64] when doing a COM property get or set. Since the "All" profiles value of 0x7FFFFFFF is [int]::MaxValue, it would trigger "Specified cast is not valid" when modifying a rule that's already set to All Profiles or trying to be.
* Fixed catch-all error handler to include exception detail
* Added test converage for this case
* Begin rewrite of win_iis_webbinding
Add integration testing, check mode and idempotency
Add support for SNI
Fix replacing SSL cert on existing bindings
* finished up initial rewrite of win_iis_webbinding
* updated test to remove tests as filters
* updated win_iis_webbinding docs
* fix more doc/formatting issues win_iis_webbinding
* Removed string empty defaults for certs. Added a few new helpful
comments.
* Revert "Removed string empty defaults for certs. Added a few new helpful"
This reverts commit 48f35faea8d5294b34e1aa842a95c9352b90257f.
* Add module mlnxos_linkagg for configuring LAG and MLAG on Mellanox
switches
Signed-off-by: Samer Deeb <samerd@mellanox.com>
* Remove unnecessary method in unit-test
remove _execute_module and use execute_module from base class
* Add eos_interface module
* Implementation of eos_interface module
* Intergration test for eos_interface module
* Minor fix in eos_l3_interface module
* Minor fix in ios_interface integration test
* Fix CI issues
* Fix more CI issues
* update version parsing and move requirements to nso_* modules
prepare for introduction of nso_show module that has other version
requirements than the existing nso_* modules.
* Add nso_show module for retreiving config from Cisco NSO
New module that supports getting configuration and operational data
from Cisco NSO.
Shell is implemented via the command module. There was a special case
in mod_args to do that. Make shell into an action plugin to handle that
instead.
Also move the special case for the command nanny into a command module
action plugin. This is more appropriate as we then do not have to send
a parameter that is only for the command module to every single module.
* vhba template and integration test
* SAN Connectivity Policies and integration test
* VSANs and integration tests
* WWNN/WWPN Pools and integration test
* WWNN/WWPN Pools and integration test
* option description spelled out (aliased to descr)
removed docs for list of dictionaries syntax
follow ACI indent style
state absent only requires dn name match (not full prop match)
* vhba template and integration test
* SAN Connectivity Policies and integration test
* VSANs and integration tests
* WWNN/WWPN Pools and integration test
* VSANs module and integration test
* removed docs for list of dictionaries syntax
follow ACI indent style
state absent only requires dn name match (not full prop match)
* vhba template and integration test
* SAN Connectivity Policies and integration test
* VSANs and integration tests
* WWNN/WWPN Pools and integration test
* vHBA templates and integration test
* option description spelled out (aliased to descr)
removed docs for list of dictionaries syntax
follow ACI indent style
state absent only requires dn name match (not full prop match)
* vhba template and integration test
* SAN Connectivity Policies and integration test
* VSANs and integration tests
* WWNN/WWPN Pools and integration test
* SAN Connectivity Policies only
* option description spelled out (aliased to descr)
removed docs for list of dictionaries syntax
follow ACI indent style
state absent only requires dn name match (not full prop match)
* Resolve newly added tests as filters
* Add code smell to test for ansible provided jinja tests as filters syntax
* Add docs for no-tests-as-filters code smell test
* Address tests as filters in new integration tests
* Address feedback
* Address feedback 2
* disk can be mounted to vm
* add version added
* fix lint
* Fix some mirrors
* fix lint
* remove trailing space
* fix as review comment
* fix yaml
* fix
* fix
* Minor update to doc on unmounting disk from VM
* WIP adds network subnetting functions
* adds functions to convert between netmask and masklen
* adds functions to verify netmask and masklen
* adds function to dtermine network and subnet from address / mask pair
* network_common: add a function to get the first 48 bits in a IPv6 address.
ec2_group: only use network bits of a CIDR.
* Add tests for CIDRs with host bits set.
* ec2_group: add warning if CIDR isn't the networking address.
* Fix pep8.
* Improve wording.
* fix import for network utils
* Update tests to use pytest instead of unittest
* add test for to_ipv6_network()
* Fix PEP8
* Update task definitions for network_cli
* Add connection to debug messages
* Specify connection for prepare task
* pc won't be around for connection=network_cli
* Assorted Python 3 fixes
* Give default port if ansible_ssh_port missing
* delegate -> connection
* Extend error regex
* Added module new win_disk_facts
* Corrected examples section
* Added integration tests
* Added some disk properties
* Removed whitspaces
* Extended docu
* Changed header
* Added partition, volume and physical disk output
* Removed MediaType property of phys. disk
* Added return values
Added virtual disk, volume and physical disk output
* Added docu for return values
* Removed whitespaces
* Improved and added values
- Added virtual disk return values
- Improved code
* Updated docu
* Removed whitespaces
* Removed check
* Improved code and docu
* Changed integration test
* Changed integration test
* Changed integration test
* Changed integration test
* corrected typo
* Added admin test because CIM is not available with user rights
* Changed unit prefix from decimal to binary
This fix check if DNS4 is None or not before proceeding with
other operations. Also, added unit test for this change.
Signed-off-by: Fedor Sumkin <qosys.net@gmail.com>
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Add eos and fix tests to run multiple connections
* Update tests to report connection
* Add missing START messages
* Fix unspecified connection
* Python 3 updates
Exceptions don't have `.message` in Python 3
* Override `become` when using `connection=local`
* Slight restructuring to make eapi easier later on
* Move eapi toggle to prepare_eos
* Pull out connection on eapi tasks
Split the one monolithic test for basic.py into several files
* Split test_basic.py along categories.
This is preliminary to get a handle on things. Eventually we may want
to further split it so each file is only testing a single function.
* Cleanup unused imports from splitting test_basic.py
* Port atomic_move test to pytest.
Working on getting rid of need to maintain procenv
* Split a test of symbolic_mode_to_octal to follow unittest best practices
Each test should only invoke the function under test once
* Port test_argument_spec to pytest.
* Fix suboptions failure
Currently when we make up the return value, we take values based of the
parameters rather than the generated openssl_certificate itself.
This commits returns the actual certificate values making it all time
accurate.
* Update validation test for new copyright
Ensure new modules without the new copyright header fail
validation
Ensure existing modules without copyright in top 20 lines fail
* Add documentation of 108 error
Create label in developing modules documentation so that
the validation page can point to it
* Ensure new style copyright header passes test!
* add nxos_aaa_server IT
* add nxos_aaa_server_host ITs
* Add nxos_gir IT
* Add nxos_gir_profile_management IT
* add newly added tests to nxos.yaml
* fix nxos.yaml indentation
* fix indentation again
* skip nxos_git_profile_management IT for titanium
* change idempotency to non-idempotency check
https://docs.python.org/2/library/stdtypes.html#str.split
str.split([sep[, maxsplit]])
If sep is given, consecutive delimiters are not grouped together and are deemed
to delimit empty strings.
>>> "85563 ----------------C-- /var/lib/libvirt/images".split(' ')[0:2]
['85563', '']
>>> "85563 ----------------C-- /var/lib/libvirt/images".split()[0:2]
['85563', '----------------C--']
Tests for:
* ecs_cluster
* ecs_service
* ecs_service_facts
* ecs_taskdefinition
* ecs_taskdefinition_facts
* Add idempotency testing
Test ecs_cluster, ecs_service and ecs_taskdefinition for trivial
idempotency. Add FIXMEs to the tests because the latter two fail.
Remove unused dependencies
This fix check for ESXi server instance before proceeding
with managing local user. Also, adds integration tests for
this change.
Fixes: #32465
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Port ec2_vpc_net to boto3 and add support to expand existing VPCs
* Add s-hertel as an author for ec2_vpc_net
* Update ec2_vpc_net test for new error triggered by lack of credentials
Fix backwards compatibility
Document new return value
* Fix pep8 and return documentation
* new package_facts module
Signed-off-by: Adam Miller <maxamillion@fedoraproject.org>
* remove package_facts pkg manager aliases, they are misleading
Signed-off-by: Adam Miller <maxamillion@fedoraproject.org>
* fix package_facts tests now that aliases are dropped
Signed-off-by: Adam Miller <maxamillion@fedoraproject.org>
* Initial commit for UcsConnection and ucs_macpool module.
Configures MAC address pools on UCS Manager.
* ansible-doc fixes
* PEP8 fixes
* pep8, pylint, and validate-modules fixes
* Correct indent issue introduced during pycodestyle cleanup
* Simplified module arugment setup.
Placed all code in main to avoid multiple calls and arg passing.
* module_utils/ucs changed to UCSModule which now handles login/logout directly
login_handle removed from module.params
doc updates on mac_list params and change to first_addr/last_addr for mac blocks
checking of all mac params
* Move module_utils to remote_management/ucs
Fix validate-modules issue with docs
* UCS MAC pool integration tests
Fixed issues with MAC pool descr and address range params
* Fixing aruba's inconsitent indenting.
* Adding config with different children indentation and unit test to confirm the different spacing does not matter.
* Fixing pylint check. Missed an r prefix.
junos integration test fails intermittently after task enables netconf
on the remote host and the second task tries to create a persistent
connection. Add a delay after the first task to ensure netconf is up
running on remote host.
* When inserting a new rule in `insert_after_rule`, check if the old rule is
the last rule, to avoid a list index out of range error when attempting to
access the next rule.
* Add a test for inserting a new rule after the last rule.
Allow CamelCase version of snake_dict_to_camel_dict
(currently only dromedaryCase is supported)
Add reversible option to camel_dict_to_snake_dict
Add tests for both of these options
* Fix vyos on network_cli on python3
bytes do not have format() in Python3
* Push connection to tasks, with bonus connection=local test
* Run tests without explicit connection set
* Add/update START messages where appropriate
* vmware_host: add reconnect and add_or_reconnect states
Add "reconnect" and "add_or_reconnect" choices for "state".
* reconnect: reconnect an esxi to a vcenter (imply it is present).
* add_or_reconnect: do the same but add the esxi if absent.
Also:
* tag the cluster_name as required (because it is).
* tag esxi_username and esxi_password as not required because
they aren't when the esxi isn't added.
* vmware_host: add + prepare/document integration tests
vmware_host module
Add integration test for the add part of "add_or_reconnect" state.
Prepare and document integration tests for the reconnect part
of "add_or_reconnect" state and "reconnect" and "absent" states.
Currently we can't test those states as ReconnectHost_Task (for
"reconnect") and EnterMaintenanceMode_Task (for "absent") aren't
implemented yet in vcsim (from vmware/govmomi)
* TestPlaybookCLI: '--flush-cache' were ignored
Check that using '--flush-cache' does something
* check that '_flush_cache' does something
There isn't any fact by default: the assertion was true even if
'cli._flush_cache()' isn't called.
* Fixing save so it still works. Adding changed as an option for save_when.
* Updating unit tests.
* Updating description to state that changed was added in 2.5.
* Added new module: Azure RM SQL Servers
* fixed sanity issues
* enabled integration test
* disabling test as Microsoft.Sql namespace not available
* renamed servers -> server
* updates as requested in the review
* udpates to sql server
* renamed module
* replaced has_key by in
* flattened results
* final updates to sql server
* updates as requested in the review
* added more tests
* deleting unexisting instance up front
* more tests
* another round of test changes
* removed uneeded test
* Change cast_list_to_dict to more generic rekey_on_member
cast_list_to_dict was taking an arbitrary data format in and returning
an arbitrary data format out. Rework this to be a more generic function
which creates a dict of dicts based on a member of the dict.
Remove cast_dict_to_list since rekey_on_member handles the use cases we
know about and cast_dict_to_list suffers from the same problems as
cast_list_to_dict. If this is still needed we could think about filters
we could add to do this in a short jinja2 pipeline.
* Fix bare excepts (bare excepts even catch sys.exit())
* allow multiple values per key in name fields in openssl_certificate
* check correct side of comparison
* trigger only on lists
* add subject parameter to openssl_csr
* fix key: value mapping not skipping None elements
* temporary fix for undefined "subject" field
* fix iteration over subject entries
* fix docs
* quote sample string
* allow csr with only subject defined
* fix integration test
* look up NIDs before comparing, add hidden _strict params
* deal with empty issuer/subject fields
* adapt integration tests
* also normalize output from pyopenssl
* fix issue with _sanitize_inputs
* don't convert empty lists
* workaround for pyopenssl limitations
* properly encode the input to the txt2nid function
* another to_bytes fix
* make subject, commonname and subjecAltName completely optional
* don't compare hashes of keys in openssl_csr integration tests
* add integration test for old API in openssl_csr
* compare keys directly in certificate and publickey integration tests
* fix typo
* ACI Encap Pool: Add new module to support VLAN, VXLAN, and VSAN Pools
* update logic for allocation_mode
* update docstring and tests
* Update filter_target since url method has been updated
* Fix _clean_result for debug callback with 1 char var names
The check in _clean_results was removing any keys that happened
to be one of the chars in ('invocation') instead of the string
'invocation'. This was meant to be a tuple but there was no comma
so the for iterated the string instead of the tuple.
Introduced in 9dba580204fcc7d95d4ca2ea2ae4ce23fe28c2ed
Update unit test to catch this.
Fixes#33723
* Use .pop() to remove invocation from results dict
In base callback _clean_results, simplify the way the
'invocation' item is removed.
Add some more unit tests.
* Deprecate Entity, EntityCollection and use subspec in network modules
* As per proposal https://github.com/ansible/proposals/issues/76
deprecate use of Entity, EntityCollection, ComplexDict, ComplexList
and use subspec instead.
* Refactor ios modules
* Refactor eos modules
* Refactor vyos modules
* Refactor nxos modules
* Refactor iosxr modules
* Add support for key in suboptions handling
* Fix CI issues
* Refactor cloudscale API code
Move code common to all cloudscale cloud modules into a common base
class.
This is needed as a prepartion of the cloudscale_floating_ip module.
* cloudscale_floating_ip module
New cloud module to manage floating IPs on the cloudscale.ch IaaS
service.
Fix a bunch of things mentioned in the review.
Delete commented code from module. Add fix for vcsim not returning
uncommitted.
Add integration test.
Add changes suggested
* Bulk pep8 fixes - hand crafted
Fix by hand the remaining issues that autopep8 couldn't
* Next batch of hand crafted pep8 fixes
* Ignore W503
https://github.com/PyCQA/pycodestyle/pull/499
* Revert more of W503
* add acr
* acr
* acr
* fix a minor error
* add tests and fixes as suggested
* use get_mgmt_svc_client to enable bi
* fixes as zim suggested
* code refinement
* get acr instance before update
* fix a bug
* remove Classic sku as it's going to deprecate
* pass sanity test
* fix sanity
* fixes based on comments
* fix broken namespace unregistered error
* fix a bug
* fix a bug
* fix
* add register namespace
* fixes tests
* remove pdb
* add ci azure test
* removed required: false
* renamed acr -> containerregistry
* fixed spelling mistake
* fixed idempotence
* fix for idempotence was wrong
* fixed a few issues
* different log when exception different than ResourceNotFound
* self.fail instead of log
* updated sample return value
* added login server in results
* fixed else
* fixed line too long
* cmp -> __ne__
* fixed trailing whitespace
* output.changed is false when instance updated
* fix for state change
* one more update
* update instance only when location or sku has changed
* fixed syntax error
* fixed acr test
* just removed unnecessary comment to trigger ci
* update return value shape
* flatten `state`
* change credential dictionary state
* add credentials to integration tests
* fixed: win_copy: typo "file file" (double "file")
Signed-off-by: Alexey Shumkin <Alex.Crezoff@gmail.com>
* Add quotes around filenames/directories
* Fix tests for new quotes
* Fix tests for new quotes
* One more ?
* Another one...
* - Netconf plugin addition for iosxr
- Utilities refactoring to support netconf and cliconf
- iosx_banner refactoring for netconf and cliconf
- Integration testcases changes to accomodate above changes
* Fix sanity failures, shippable errors and review comments
* fix pep8 issue
* changes run_command method to send specific command args
* - Review comment fixes
- iosxr_command changes to remove ComplexDict based command_spec
* - Move namespaces removal method from utils to netconf plugin
* Minor refactoring in utils and change in deprecation message
* rewrite build_xml logic and import changes for new utils dir structure
* - Review comment changes and minor changes to documentation
* * refactor common code and docs updates
In case of workflow delete action, the returned 404 status code
considered as invalid although it's a valid code for not found (deleted)
entity.
Removed verification of the status. Only success should be verified.
Fixes#33524
* Fix typo in net_logging/eos
* This seems to be required to use eos_user in this way
* Fix indentation in net_static_route/eos
* Rework interface check in eos_vrf
This should do the right thing.
* Add some integration tests for ec2_vpc_net module
* Add a couple tests for check mode
fix typo
ensure the DHCP option set is cleaned up
* Add permissions to test policy
* Porting tests to pytest
* Achievement Get: No longer need mock/generator.py
* Now done via pytest's parametrization
* Port safe_eval to pytest
* Port text tests to pytest
* Port test_set_mode_if_different to pytest
* Change conftest AnsibleModule fixtures to be more flexible
* Move the AnsibleModules fixtures to module_utils/conftest.py for sharing
* Testing the argspec code requires:
* injecting both the argspec and the arguments.
* Patching the arguments into sys.stdin at a different level
* More porting to obsolete mock/procenv.py
* Port run_command to pytest
* Port known_hosts tests to pytest
* Port safe_eval to pytest
* Port test_distribution_version.py to pytest
* Port test_log to pytest
* Port test__log_invocation to pytest
* Remove unneeded import of procenv in test_postgresql
* Port test_pip to pytest style
* As part of this, create a pytest ansiblemodule fixture in
modules/conftest.py. This is slightly different than the
approach taken in module_utils because here we need to override the
AnsibleModule that the modules will inherit from instead of one that
we're instantiating ourselves.
* Fixup usage of parametrization in test_deprecate_warn
* Check that the pip module failed in our test
* Integration tests for zabbix_host using Zabbix on Ubuntu 14.04.
* fix duplicate yaml key in test
* .changed -> is changed, |failed -> is failed, trim configfile
* zabbix_host integration test does not need BOTMETA entry, inherited from module
This fix adds functionality to configure vmware guest parameter called
'maxMkconnections'. Also, added integration test for this change.
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
This fix adds functionality to support memory_reservation and
memory_reservation_lock while managing Virtual Machine.
Fixes: #20407
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Fix azure_rm_acs due to Azure breaking API change
* resolve code review feedbacks
* resolve test failures
* better name
* ignore case for vm size
* reformat code
* resolve code review feedbacks
* new windows module win_audit_policy_system
* removed the backup/restore functionality
adjusted to use run-command rather than running the command directly
adjusted testing appropriately for the above changes
* fixed issue with variable naming in testing
removed .psm1 from requires
fixed copyright
* Updated audit_type to list and added appropriate error handling
Updated testing accordingly
Fixed up documentation
* Refactor common network shared and platform specific code into package (part-1)
As per proposal #76 refactor common network shared and platform specific
code into sub-package.
https://github.com/ansible/proposals/issues/76
* ansible.module_utils.network.common - command shared functions
* ansible.module_utils.network.{{ platform }} - where platform is platform specific shared functions
* Fix review comments
* Fix review comments
* Refactors bigip_node
Includes a number of fixes and enhancements in addition to refactoring
the code to be inline with f5 standards
* Fixes upstream errors
* Adds bigip_policy_rule module
This module is the second component of managing LTM policies on
BIG-IP. This module lets you manage the rules of a policy
* Fixing upstream errors
* Correcting YAML errors
* Fixes and features for bigip_provision
Adds support for dedicated modules. Fixes bug in minimum name.
Adds wrappers around checking for up-ness so that they will contribute
to the watch loop
* Fixes upstream errors
This fix makes name and folder as required together
parameters in vmware_guest_snapshot.
Update integration tests for vmware_guest_snapshot.
Fixes: #22644
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
Fix adds esxi_hostname as Ansible module argument for user
to define ESXi hostname to deploy VMware vSwitch.
Fixes: #24647
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
Empty __init__ will allow us to use python namespaces with all of these
files. That may be something we want to take advantage of for allowign
them to be expanded by user dirs. Also might be needed for AnsiballZ or
other wrapper enhancements in the future.
* Added . and / to rule args regexp
Things like pam_echo.so file=/etc/foo.txt weren't being matched and
causing incorrect change counts. Adding / and . fixed that.
Fixes#33351
* pamd: test argument with value
Relates #33351
Fixes#33406Fixes#33405
* Fix typo in network_cli for sendonly
* Send `abort` to remote device in case configuration fails
* Fix indentation issue in eos_static_route integration test
* Revert network_cli change
This fix adds support for hardware parameter 'numCoresPerSocket'
in vmware_guest module. Also, adds integration tests for this change.
Fixes: #20406
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Adding module enos_config and its UT files
* Removing trailing line
* Removing trailing lines
* Editing enos_module.py to fix build errors
* Removing blank lines in end
* Updating enos_config.py based on review comments
* Adding one more blank line
* Removing training white space
* Removing test_enos_config_force method from UT
* Updating documentation
* Comments by John, Remove version_added: "2.5"
* Add netscaler_nitro_request module
* Make changes as requested.
* Fix whitepsace in EXAMPLES block.
* Set module changed status according to operation performed.
* Added support to Datacenter resources in HPE OneView
* Adjusting comments in oneview_datacenter_facts
* Adding no_log on the documentation
* Using Pytest to Oneview DatacenterFactsModule tests
Currently the check() method for idempotence only assumes the public
key is under the form of a PEM file when its not always the case.
The module openssl_publickey allows one to generate OpenSSH format
publickey. This leads to idempotence not being detected.
* Warn on tests used as filters
* Update docs, add aliases for tests that fit more gramatically with test syntax
* Fix rst formatting
* Add successful filter, alias of success
* Remove renamed_deprecation, it was overkill
* Make directory alias for is_dir
* Update tests to use proper jinja test syntax
* Update additional documentation, living outside of YAML files, to reflect proper jinja test syntax
* Add conversion script, porting guide updates, and changelog updates
* Update newly added uses of tests as filters
* No underscore variable
* Convert recent tests as filter changes to win_stat
* Fix some changes related to rebasing a few integration tests
* Make tests_as_filters_warning explicitly accept the name of the test, instead of inferring the name
* Add test for tests_as_filters_warning
* Update tests as filters in newly added/modified tests
* Address recent changes to several integration tests
* Address recent changes in cs_vpc
Currently during the check phase, the code considers the file to be
a public key if the file exist - which is not necessarily true.
This commits aims to ensure that the file is actually a publickey else
returns false for the check.
* add type manipulation
* update for py3
* add tests for list to dict
* Add dict to list tests
* Update tests to search for regex in response
* pep8 clean up
* update Exception for py3
* update test to be py2/3 compat
* update for py26 compat
* potential fix for py3 and py26
* potential fix for py3 and py26 take2
* add new line to kick off shippable
* remove cache file created
* fix filter name
* add space for shipable
* Fix junos integration test fixes as per connection refactor (#33050)
Refactor netconf connection plugin to work with netconf plugin
* Fix junos integration test fixes as per connection refactor (#33050)
Refactor netconf connection plugin to work with netconf plugin
Fix CI failure
Fix unit test failure
Fix review comments
* add availability set for vm
* add test
* add import
* fix
* add test assert and output
* fix lint and version added
* add null check
* fix mirror
* fix mirror
* Adding aliases for field attributes and renaming async attribute
As of Python 3.7, the use of async raises an error, whereas before the use
of the reserved word was ignored. This adds an alias field for field attrs
so that both async and async_val (interally) work. This allows us to be
backwards-compatible with 3rd party plugins that may still reference Task.async,
but for the core engine to work on Py3.7+.
* Remove files fixed for 'async' usage from the python 3.7 skip list
* Allow the user to circumvent adding -tt on ssh commands to help aid in
debugging ssh related problems.
* Move config to the plugin
* Set version_added
* Change yaml section to "connection"
* Fix ssh unit tests
* Improve error message in cloudscale_server module
Fix punctuation and add the full contents of "info" to the output in
case of failed API calls. This is useful in case of connection timeouts
and other error conditions where there is no response body available.
* Increase timeouts in cloudscale_server module
Increase the timeouts to not fail in case the API calls take a bit
longer than usual. The default timeout of fetch_url is 10s which is
quite short. Increase it to 30s. The timeout for waiting for a server
change is increased as well as it calls the API in a loop. Therefore
this value should be larger than the API timeout.
* Send API parameters as JSON in cloudscale_server module
Use JSON to send the POST data to the API instead of an urlencoded
string. Urlencoding is not really a good match for some Python
datatypes.
This fixes an issue when submitting a list of SSH keys which did not get
translated properly.
* Fix typo in cloudscale_server documentation
* cloudscale_sever: Replace timeout const by api_timeout param
Replace the static TIMEOUT_API constant by a user configurable
api_timeout parameter. Also eliminate the TIMEOUT_WAIT constant by
2*api_timeout. This means that the timeout to wait for server changes is
always double the timeout for API calls.
* Use Debian 9 image for cloudscale_server tests
* win_updates: removed scheduled task to use become instead
* updated docs to remove scheduled task info
* fix issue with only installing last update in group
* jsonify inventory
* smarter import, dont pass kwargs where not needed
* added datetime
* Eventual plan for json utilities to migrate to common/json_utils when we split
basic.py no need to move jsonify to another file now as we'll do that later.
* json_dict_bytes_to_unicode and json_dict_unicode_to_bytes will also
change names and move to common/text.py at that time (not to json).
Their purpose is to recursively change the elements of a container
(dict, list, set, tuple) into text or bytes, not to json encode or
decode (they could be a generic precursor to that but are not limited
to that.)
* Reimplement the private _SetEncoder which changes sets and datetimes
into objects that are json serializable into a private function
instead. Functions are more flexible, less overhead, and simpler than
an object.
* Remove code that handled simplejson-1.5.x and earlier. Raise an error
if that's the case instead.
* We require python-2.6 or better which has the json module builtin to
the stdlib. So this is only an issue if the stdlib json has been
overridden by a third party module and the simplejson on the system
is 1.5.x or less. (1.5 was released on 2007-01-18)
This fix adds ability to set MAC address maunally. Before adding
any MAC address, the value is validated. If value is not valid, then
MAC address is set to vCenter generated MAC address.
Also, added integration tests for this change.
Fixes: #21161
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Add new filter to parse xml output for network use cases
Fixes#31026
* Add parse_xml filter
* Add documentation for parse_xml filter
* Edited for clarity.
* Fix review comment and add unit tests
* Fix unit test CI failure
* Fix CI issues
* Fix unit test failures
* Fix review comments
* More copy edits.
* Adding RPC attribute arguments to `junos_rpc` network module.
* Specifying module argument version.
* Fixing DOCUMENTATION block.
* First attempt at new test fixture.
* Updated RPC_CLI_MAP.
* Use `result` instead of `reply`.
* Added eagerzeroedthick disk option to disk spec
* Updated docstrings for vmware_guest disk
* VMware: Integration test for disk type
Signed-off-by: Steve Jacobs <sjacobs@brokencrew.com>
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
Adds facts about datastores, esxi_host, vm files, ha state, question, is_template, consolidation status and hw_files. Also, adds integration tests for vmware fact enhancement.
This module can be used to manage guests on a vCMP provisioned BIG-IP.
vCMP is a hardware-only feature, therefore this module cannot be used
on the VE editions of BIG-IP.
* move set_module_args to units.modules.utils
* unit tests: reuse set_module_args
* unit tests: mock exit/fail_json in module.utils.ModuleTestCase
* unit tests: use module.utils.ModuleTestCase
* unit tests: fix 'import shadowed by loop variable'
* Add integration test suite for ec2_vpc_subnet
* wrap boto3 connection in try/except
update module documentation and add RETURN docs
add IPv6 support to VPC subnet module
rename ipv6cidr to ipv6_cidr, use required_if for parameter testing, update some failure messages to be more descriptive
DryRun mode was removed from this function a while ago but exception handling was still checking for it, removed
add wait and timeout for subnet creation process
fixup the ipv6 cidr disassociation logic a bit per review
update RETURN values per review
added module parameter check
removed DryRun parameter from boto3 call since it would always be false here
fix subnet wait loop
add a purge_tags parameter, fix the ensure_tags function, update to use compare_aws_tags func
fix tags type error per review
remove **kwargs use in create_subnet function per review
* rebased on #31870, fixed merge conflicts, and updated error messages
* fixes to pass tests
* add test for failure on invalid ipv6 block and update tags test for purge_tags=true function
* fix pylint issue
* fix exception handling error when run with python3
* add ipv6 tests and fix module code
* Add permissions to hacking/aws_config/testing_policies/ec2-policy.json for adding IPv6 cidr blocks to VPC and subnets
* fix type in tests and update assert conditional to check entire returned value
* add AWS_SESSION_TOKEN into environment for aws cli commands to work in CI
* remove key and value options from call to boto3_tag_list_to_ansible_dict
* remove wait loop and use boto3 EC2 waiter
* remove unused register: result vars
* revert az argument default value to original setting default=None
* included inventory and callback in new config
allow inventory to be configurable
updated connection options settings
also updated winrm to work with new configs
removed now obsolete set_host_overrides
added notes for future bcoca, current one is just punting, it's future's problem
updated docs per feedback
added remove group/host methods to inv data
moved fact cache from data to constructed
cleaner/better options
fix when vars are added
extended ignore list to config dicts
updated paramiko connection docs
removed options from base that paramiko already handles
left the look option as it is used by other plugin types
resolve delegation
updated cache doc options
fixed test_script
better fragment merge for options
fixed proxy command
restore ini for proxy
normalized options
moved pipelining to class
updates for host_key_checking
restructured mixins
* fix typo
* Allow backoff for describe_subnets
Improve exception handling to latest standards
* Add integration test suite for ec2_vpc_subnet
* Add test for creating subnet without AZ
Fix bug identified by test
Fixes#31905
* Several tests were marked as FIXME and should have been fixed with
the boto3 move.
* Improved tags output. Add purge_tags option (default: no)
* Allow description and tags update
* Return launch_permissions
* Allow empty launch permissions for image creation
* Empty launch permissions should work the same way for image
creation as no launch permissions
* Cope with ephemeral devices in AMI block device mapping
* Ephemeral devices can appear in AMI block devices, and this information should be returned
* Fix notation for creating sets from comprehensions
This fix adds new fact - 'Cores Per Socket' about vmware guest machine.
Also, adds integration test for this change.
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Fix vault --ask-vault-pass with no tty
2.4.0 added a check for isatty() that would skip setting up interactive
vault password prompts if not running on a tty.
But... getpass.getpass() will fallback to reading from stdin if
it gets that far without a tty. Since 2.4.0 skipped the interactive
prompts / getpass.getpass() in that case, it would never get a chance
to fall back to stdin.
So if 'echo $VAULT_PASSWORD| ansible-playbook --ask-vault-pass site.yml'
was ran without a tty (ie, from a jenkins job or via the vagrant
ansible provisioner) the 2.4 behavior was different than 2.3. 2.4
would never read the password from stdin, resulting in a vault password
error like:
ERROR! Attempting to decrypt but no vault secrets found
Fix is just to always call the interactive password prompts based
on getpass.getpass() on --ask-vault-pass or --vault-id @prompt and
let getpass sort it out.
* up test_prompt_no_tty to expect prompt with no tty
We do call the PromptSecret class if there is no tty, but
we are back to expecting it to read from stdin in that case.
* Fix logic for when to auto-prompt vault pass
If --ask-vault-pass is used, then pretty much always
prompt.
If it is not used, then prompt if there are no other
vault ids provided and 'auto_prompt==True'.
Fixes vagrant bug https://github.com/hashicorp/vagrant/issues/9033Fixes#30993
* Update vmware.py
Incorrect chain of attributes to obtain snapshots from virtual machine. Module 'vmware_guest_facts' uses method 'gather_vm_facts' of vmware.py and always gets empty list of snapshots.
* Added test for module vmware_guest_facts. Checked VM snapshots.
* Fixed tests for vmware_guest_facts. Ignored certificate for vmware_guest_snapshot module.
* Integrated publickey import and removal in iosxr_user
* Fixed linting issues
* Added version added for publickeyfile option
* Added quotation marks to version, oops
* Added some integration tests, added some checks to prevent aggregate users with public keys.
* Added some integration test files
* Created mutually exclusive public_key and public_key_contents versions of config
* Modified tests to use both methods and test more logins
* Added supports for aggregates
* Incorporated provider auth
* Fixed some lint issues
* Fixed a YAML lint issue
* Implemented catches for unconfigured providers.
* Fixed catches, hopefully
* Another test
* Added groups support so you can add users to multiple groups
* Trailing whitespace
* Expand ansible-test --remote-terminate support:
- windows-integration
- network-integration
These commands previously accepted the option, but did not support it.
* Terminate windows and network instances when done.
Add new module vmware_host_facts ,it can get remote vmware host system info like setup module
* modify ansible version
* optimized output for human readable
* add serial number get_system_facts() add ansible_product_serial
* fix pep8 issue and ansible module required format
* Use find_obj method instead get_obj
* add ansible_hostname ansible_distribution_build
* add integration test
* vmware_host_facts integration test add verify
* fix yamllint issue
* fix boilerplate test
* Update vmware_host_facts.py
* fix RETURN key's name
* Adding git_command module and its UT file
* Changing Author Name and removing 2 blank lines
* Removing blank lines
* Adding enos_config and its UT files
* Removing config module as I am allowed to have only module per PR
* Work on Ganesh's Review comments
* John Review Comments on enos_command.py
* Review comments of John
* ios_vlan DI module
Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>
* Integration test
Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>
* comment out testcases since the image is not available in dci
Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>
* add aggregate test
Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>
* Do not run script in check mode
Fixes#30676
* Reformat script integration test
* Add integration tests for check mode of script module
* Fix name on test
* Cleanup temp file
* win_script integration test syntaxt changes
* Add check mode tests for win_script
* Use proper variable in test
* Fail if source file does not exist
* Verify script is accessible and don't copy in check mode
Use shlex to properly split shell arguments, though a path with spaces in it still needs to be quoted in the playbook.
Add note to docs describing such.
Improve error message if file is not found indicating there may be a space in the path.
* Properly encode path now that path is split using shlex
* Allow for spaces in both path and script name
* Add unicode character test to Linux script tests
* Add Linux test for space in path to script
* Remove uses of assert in production code
* Fix assertion
* Add code smell test for assertions, currently limited to lib/ansible
* Fix assertion
* Add docs for no-assert
* Remove new assert from enos
* Fix assert in module_utils.connection
* Clean up after two recent synchronize tests
- add clean up after the last two tests in synchronize to make them
match with the expectations in the previous tests
Signed-off-by: Robert Marshall <rmarshall@redhat.com>
* Add link-dest functionality to synchronize module
- add the link-dest option to the synchronize module code
- add tests for the link-dest option
- add documentation of the link_dest option to synchronize
- modify changed flag so it can properly work around rsync
upstream not flagging hardlinks as a change properly in
formatted output
Signed-off-by: Robert Marshall <rmarshall@redhat.com>
* Minor change to test
* Add mtu option nxos_interface feature idea
Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>
* Add unit test for mtu feature
Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>
* Better handling of malformed vault data envelope
If an embedded vaulted variable ('!vault' in yaml)
had an invalid format, it would eventually cause
an error for seemingly unrelated reasons.
"Invalid" meaning not valid hexlify (extra chars,
non-hex chars, etc).
For ex, if a host_vars file had invalid vault format
variables, on py2, it would cause an error like:
'ansible.vars.hostvars.HostVars object' has no
attribute u'broken.example.com'
Depending on where the invalid vault is, it could
also cause "VARIABLE IS NOT DEFINED!". The behavior
can also change if ansible-playbook is py2 or py3.
Root cause is errors from binascii.unhexlify() not
being handled consistently.
Fix is to add a AnsibleVaultFormatError exception and
raise it on any unhexlify() errors and to handle it
properly elsewhere.
Add a _unhexlify() that try/excepts around a binascii.unhexlify()
and raises an AnsibleVaultFormatError on invalid vault data.
This is so the same exception type is always raised for this
case. Previous it was different between py2 and py3.
binascii.unhexlify() raises a binascii.Error if the hexlified
blobs in a vault data blob are invalid.
On py2, binascii.Error is a subclass of Exception.
On py3, binascii.Error is a subclass of TypeError
When decrypting content of vault encrypted variables,
if a binascii.Error is raised it propagates up to
playbook.base.Base.post_validate(). post_validate()
handles exceptions for TypeErrors but not for
base Exception subclasses (like py2 binascii.Error).
* Add a display.warning on vault format errors
* Unit tests for _unhexlify, parse_vaulttext*
* Add intg test cases for invalid vault formats
Fixes#28038
* azure_rm_virtualmachine: added support for specifying custom image
* Use separate parameter for custom_image, add very basic test
* missed the version_added tag for doco
* removed whitespace I accidentally left in
* merged custom image into the image dict and added more tests
* added one more test
* implements jsonrpc message passing for ansible-connection
* implements more generic mechanism for persistent connections
* starts persistent connection in task_executor if enabled and supported
* supports using network_cli as top level connection plugin
* enhances logging for persistent connection to stdout
* Update action plugins
* Fix Python3 RPC
* Fix Junos bytes<-->str issues
* supports using netconf as top level connection plugin
* Error message when running netconf on an unsupported platform
* Update tests
* Fix `authorize: yes` for `connection: local`
* Handle potentially JSON data in terminal
* Add clarifying detail if possible on ConnectionError
* Protect AWS credentials from accidental commits
* Improve documentation for IAM policies
* Update ELB tests to be multi region
Allow AZs to reflect the region in which the tests are run.
This will not work for regions with fewer than three AZs,
but those are relatively rare
This fix adds details about snapshots in result of
vmware_guest_snapshot, when operation is successful.
Fixes: #32154
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Moving modules from lenovo to cnos
* Merge conflicts
* Update cnos_conditional_template.py
Removed
180:5: E265 block comment should start with '# '
188:34: E226 missing whitespace around arithmetic operator
* Update cnos_template.py
155:5: E265 block comment should start with '# '
162:34: E226 missing whitespace around arithmetic operator
* Update cnos_vlan.py
210:1: E302 expected 2 blank lines, found 1
* Update cnos_backup.py
Adding
from __future__ import (absolute_import, division, print_function)
__metaclass__ = type
* Update cnos_bgp.py
Added
from __future__ import (absolute_import, division, print_function)
__metaclass__ = type
* Update cnos_backup.py
Added a line extra
* Update cnos_command.py
Adding
from __future__ import (absolute_import, division, print_function)
__metaclass__ = type
* Update cnos_conditional_command.py
Adding
from __future__ import (absolute_import, division, print_function)
__metaclass__ = type
* Update cnos_conditional_template.py
Adding
from __future__ import (absolute_import, division, print_function)
__metaclass__ = type
* Update cnos_factory.py
Adding
from __future__ import (absolute_import, division, print_function)
__metaclass__ = type
* Update cnos_facts.py
Adding
from __future__ import (absolute_import, division, print_function)
__metaclass__ = type
* Update cnos_image.py
Adding
from __future__ import (absolute_import, division, print_function)
__metaclass__ = type
* Update cnos_interface.py
Adding
from __future__ import (absolute_import, division, print_function)
__metaclass__ = type
* Update cnos_portchannel.py
Adding
from __future__ import (absolute_import, division, print_function)
__metaclass__ = type
* Update cnos_reload.py
Adding
from __future__ import (absolute_import, division, print_function)
__metaclass__ = type
* Update cnos_rollback.py
Adding
from __future__ import (absolute_import, division, print_function)
__metaclass__ = type
* Update cnos_save.py
Add
from __future__ import (absolute_import, division, print_function)
__metaclass__ = type
* Update cnos_showrun.py
Add
from __future__ import (absolute_import, division, print_function)
__metaclass__ = type
* Update cnos_template.py
Adding
from __future__ import (absolute_import, division, print_function)
__metaclass__ = type
* Update cnos_vlag.py
Adding
from __future__ import (absolute_import, division, print_function)
__metaclass__ = type
* Update cnos_vlan.py
Adding
from __future__ import (absolute_import, division, print_function)
__metaclass__ = type
* Update cnos_backup.py
Moving it to top of file
* Update cnos_backup.py
* Moving future and metaclass to top
* Moving future and metaclass to top
* Moving future and metaclass to top
* Moving future and metaclass to top
* Moving future and metaclass to top
* Moving future and metaclass to top
* Moving future and metaclass to top
* Moving future and metaclass to top
* Moving future and metaclass to top
* Moving future and metaclass to top
* Moving future and metaclass to top
* Moving future and metaclass to top
* Moving future and metaclass to top
* Moving future and metaclass to top
* Moving future and metaclass to top
* Moving future and metaclass to top
* Putting condition to bye pass paramiko
* Condition to byepass paramiko import error
* Condition to byepass paramiko import error
* Condition to byepass paramiko import error
* Condition to byepass paramiko import error
* Condition to byepass paramiko import error
* Condition to byepass paramiko import error
* Condition to byepass paramiko import error
* Condition to byepass paramiko import error
* Condition to byepass paramiko import error
* Condition to byepass paramiko import error
* Condition to byepass paramiko import error
* Condition to byepass paramiko import error
* Condition to byepass paramiko import error
* Condition to byepass paramiko import error
* Condition to byepass paramiko import error
* Condition to byepass paramiko import error
* Removing unused import and white spaces
* Dealing with white space and import issues
* Dealing with white space and import issues
* Dealing with white space and import issues
* Dealing with white space and import issues
* Dealing with white space and import issues
* Dealing with white space and import issues
* Dealing with white space and import issues
* Dealing with white space and import issues
* Dealing with white space and import issues
* Dealing with white space and import issues
* Dealing with white space and import issues
* Dealing with white space and import issues
* Dealing with white space and import issues
* Dealing with white space and import issues
* Dealing with white space and import issues
* Dealing with white space and import issues
* Update cnos_template.py
* Squashing all commits to one as suggested by John
* Adding Unit test method for the module enos_facts.py
* Pep8 and Ylint issues addressed
* Trying again to remove blank line. Some scripts are required for this.
* Bug Fixing for interfaces
* Editing for over indenting issue
* E203 whitespace before ','
* Update enos.py
Added warnings argument as to check_args method
* Update enos_facts.py
Added warnings to check_args method
* Move profile and region checking to module_utils.ec2
Remove ProfileNotFound checking from individual modules
There are plenty of `if not region:` checks that could be removed,
once more thorough testing of this change has occured
The ec2_asg, iam_managed_policy and ec2_vpc_subnet_facts modules
would also benefit from this change but as they do not have tests
and are marked stableinterface, they do not get this change.
* Ansible files module sanity pep8 fixes
* Ansible system module and playbook base.py
* Undo empty lines not required by sanity checks
* Undo empty lines not required by sanity checks
* Undo empty lines not required by sanity checks
* Undo empty lines not required by sanity checks
* Undo empty lines not required by sanity checks
* Undo empty lines not required by sanity checks
* Undo empty lines not required by sanity checks
* Undo empty lines not required by sanity checks
* Undo empty lines not required by sanity checks
* Undo empty lines not required by sanity checks
* Undo empty lines not required by sanity checks
* Various changes
* Various changes
* Various changes
* Various changes
* Undo blank lines not required by sanity checks
* Various changes
* Various changes
* Various changes
* Various changes
* Various changes
* Undo blank line changes not required by sanity checks
* Various changes
* Various changes
* Various changes
* Various changes
* Various changes
* Missing piece after merge
* Blank lines
* Blank line
* Line too long
* Fix typo
* Unnecessary quotes
* Fix example error
* Add configuration of vlan trunk, security settings and port policies, and tests
This commit adds the following capabilities to the
vmware_dvs_portgroup module:
- Support for VLAN trunk portgroup
- Support for all security settings (promiscuous, forged transmits & mac
address changes)
- Support for all the port specific policies
- port specific policies match the vCenter UI behaviour (for instance:
block override is enabled by default)
- Cleanup and use of proper API entities not root entities
- Integration testing
* Cleanup of docs and adding more examples
* win_dsc: improved parameter handling
* removed uneeded try/catch leftover from testing
* removed undeed return values
* added custom DSC to fully test out casting
* fix up codestyle issues
* using new Requires ps version check
* fixed up error message check on earlier ps version
This fix allows user to specify alternative maintenance DB
required for initial connection in Postgresql_db module.
Also, adds pep8 related fixes.
Fixes: #30017
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
So we fixed everything that was not a module to be PEP8 compliant, and
in the meantime these 5 new files were additionally disabled from PEP8
testing.
This fixes it.
Also update Copyright/License statements.
* win_become: make it easier to become with an admin token
* Fixed up pep8 whitespace
* fix for Server 2008
* Added support for async and become on newer hosts and fix warnings
* show specific undefined var errors on -v in debug
allows users to get more specific information about undefined errors
as they might be looking at a complex data structure and need to find
the specific leaf that has the issue
* now tests works at all verbosity levels
* updated to unicode objects
* When getting the stack events we need to consider the case where we don't have ClientRequestToken fixes#32396
* Adding tests for the case when the ClientRequestToken is not present in the stack creation.
* Renaming the stack that the test for Client Request Token requires so it won't cause collisions with the basic test.
* Ensure include_role unit tests check something
This is not the case: get_tasks_vars doesn't yield
* Fix include_role unit tests
Since e609618274, include_role are not
static anymore.
* win_package: add support for arguments as list
* re-added failure tests as they were accidentally commented out
* changed exit_code in failure messages to rc
* [ec2_ami_facts] new boto3-based module as a replacement for ec2_ami_find
- new boto3-based module to gather facts about ec2 images
- intended to replace ec2_ami_find which uses boto
- an ami find task (using new module) added to the ec2_ami integration test
* [ec2_ami_facts] Use AnsibleAWSModule. Catch BotoCoreError.
* add ec2_ami_facts alias to tests
* [ec2_ami_facts] return ami launch permissions as well
This fix adds handling of error/exception message using
to_native API instead of decoding.
Also, fixes PEP8 errors.
Fixes: #31825
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Fix wrong prompt issue for network moodules
Fixes#31161Fixes#32416
* Store the device prompt in case of error
from remote device
* Check for prompt value in ios action plugin
* Add integration test
* Add some tests for iptables
* Fix remove bug (calls 2 times check to remove a chain)
* Add me as maintainer
* Fix PEP8
* Doc: Give more information on issue #18988
* Fix#18988 and test it
* Fix doc (thanks Pillou)
* enable PEP8 check for iptables
This patch addresses a number of issues, large and small, that were
identified by users in the downstream repo.
* formatting of some code
* specific option combinations leading to errors
* missing includes for unit tests
* add support to vmware_guest for template => vm conversion
While the vmware_guest currently supports conversion of VMs to templates
using the is_template argument, it does not support the inverse:
converting templates back into VMs. This change adds that
functionality.
When converting a template back into a VM, the extra config option
"uuid.action" is also set so that VMware will automatically create a new
UUID for the converted VM. If the "uuid.action" setting is already
configured, it will not be modified. Setting this prevents an
interactive question from being raised when attempting to boot the VM.
* Add integration tests for vmware_guest is_template
* Add additional idempotency test for vmware_guest is_template
* ios_logging: Fix typo in documentation
* ios_logging: Fix traceback when setting buffered destination without size
When the size parameter is not configured while configuring the buffered
destination, a traceback occurs due to the fact that validate_size expects the
parameter to be an int. Explicitely converting value to int makes the
check work for every case.
* ios_logging: Update size parameter documentation
Update the documentation of the size paramter to reflect the current behaviour
of setting a default of 4096 for the buffered dest.
* ios_logging: Add unit test
Add unit test for ios_logging testing the behaviour clarified in the previous
commits.
* ios_logging: Fix python 2.6 compliance
Also add tests for vmware_guest_snapshot, but disable them due to
vcsim not fully supporting such operations yet.
Implement changes suggested in review. Also fix same in remove_or_revert_snapshot() for consistency
This module's purpose is to specifically manage the ssl keys. It
is essentially the key component of the bigip_ssl_certificate module.
The modules were separated and the key portion deprecated from
bigip_ssl_certificate in favor of this module.
These tests are doing string matches on the error condition. Update
them to match the new strings. This is probably okay to push out to old
releases even though it's technically backwards incompatible because
production playbooks won't be checking that a parameter was missing.
Param missing is something detected and fixed while writing the playbook.
* Allow cloudformation_facts to exit gracefully if stack does not exist
make cloudformation_facts pep8
remove from legacy files
remove unnecessary if statement
Allow cloudformation_facts to exit gracefully if stack does not exist version 2
fix documentation errors
add an example for a hard-fail if a stack doesn't exist
* Remove extra whitespace
* Use the .response attribute since .message isn't present with Python 3
* Don't fail if no stack name is provided and no stacks exist.
* add static route and hsrp it cases
* add snmp_user and snapshot it
* password strength correction
* fix typo
* add compare snapshot as it is fixed in the code now
* skip snapshot tests for titanium
* titanium and nxapi conditions added
Turns out on devices where only Gigabit is available (like our
csr nodes in CI), duplex is not configurable, thus the test fail.
Removing, since we are testing modification of other properties like
description and mtu and have good coverage.
* Use correct pip version in ansible-test.
* Add git fallback for validate-modules.
* Run sanity tests in a docker container.
* Use correct python version for sanity tests.
* Pin docker completion images and add default.
* Split pylint execution into multiple contexts.
* Only test .py files in use-argspec-type-path test.
* Accept identical python interpeter name or binary.
* Switch cloud tests to default container.
* Remove unused extras from pip install.
* Filter out empty pip commands.
* Don't force running of pip list.
* Support delegation for windows and network tests.
* Fix ansible-test python version usage.
* Fix ansible-test python version skipping.
* Use absolute path for log in ansible-test.
* Run vyos_command test on python 3.
* Fix windows/network instance persistence.
* Add `test/cache` dir to classification.
* Enable more python versions for network tests.
* Fix cs_router test.
* update ec2_vpc_net_facts module to boto3
updated with RETURN values and other requested changes
removed errant extra blank line
another errant extra line removed...auto-linter not working apparently
updates per review
fix typo in RETURN docs
* fix trailing whitespace issue
* Add nxos_file_copy IT
* Restructure nxos_igmp tests
* add nxos_igmp_interface IT
* add nxos_igmp_snooping IT
* add nxos_ntp_auth IT
* Add nxos_ntp_options IT
* update nxos.yaml with new tests
* update nxos_ntp_options test
* update nxos_ntp_auth IT
In some IOS tests, we can't just assume a certain interface, as
we test on IOS and IOS-XE and in our CI they scheme numbering is
different.
Introspect version on the tests where needed.
* ec2_group: add support for rule descriptions.
* Document rule description feature and add an example using it.
* Fix removing rule descriptions.
* Add integration tests to verify adding/modifying/removing rule descriptions works as expected.
* Add permissions to hacking/aws_config/testing_policies/ec2-policy.json for updating ingress and egress rule descriptions.
* ec2_group: add backwards compatibility with older versions of botocore for rule descriptions.
* Add compatibility with older version of botocore for ec2_group integration tests.
* ec2_group: move HAS_RULE_DESCRIPTION to be checked first.
* Make requested change
* Pass around a variable instead of client
* Make sure has_rule_description defaults to None
* Fail if rule_desc is in any ingress/egress rules and the the botocore version < 1.7.2
* Remove unnecessary variable
* Fix indentation for changed=True when updating rule descriptions.
* minor refactor to remove duplicate code
* add missing parameter
* Fix pep8
* Update test policy.
* - Adds iosxr_netconf module to configure netcong service on Cisco
IOS-XR devices
* - Adds Integration test for module
- Handles diff return from load_config
* - Adds unit test for iosxr_netconf module
* windows: add #AnsibleRequires to set whether a module requires module or a specific version
* fix up pep8 issues
* changed psversion to use the actual ps Requires -Version syntax
* missed the check on #Requires -Version
* fix #Requires module extensions
* module_utils #Requires should not have .psm1 extension if "real" Powershell will ever execute them
* updated validate-modules to enforce this
* added check to disallow multi-module syntax on Ansible.ModuleUtils #Requires
* Start using ClientRequestTokens in event lists
* Include request token in all reqs that support it (basically all but check mode/changeset)
* Update placebo recordings
* Add comments for CRQ popping
* Add openssh-client to default docker container.
* Include Azure requirements in default container.
To do so, handling of pip requirements was updated to install each
set of requirements separately and then run a verification pass to
make sure there are no conflicts between requirements.
* Add missing --docker-no-pull option.
* Add documentation for the azure-requirements test.
* Handle timezone updates on Ubuntu 16.04+ on containers
Although Ubuntu 16.04 will use timedatectl by default,
containers without a working timedatectl need to use the
old method.
A bug in Ubuntu for the old method means having to write
a nasty hack
https://bugs.launchpad.net/ubuntu/+source/tzdata/+bug/1554806
* Add tests for timezones
Ensure timezone changes work across various OSs
* added win_audit_rule with integration test
* Updated integration testing to target files as well as directories
and registry keys. Split testing files apart to be more organized.
Updated powershell for better handling when targetting file objects
and optimized a bit. Removed duplicated sections that got there from a
previous merge I think.
* Decided to make all the fact names the same in integration testing.
Seemed like there would be less change of accidentally using the wrong
variable when copy/pasting that way, and not much upside to having
unique names.
Did final cleanup and fixed a few errors in the integration testing.
* Fixed a bug where results was displaying a wrong value
Fixed a bug where removal was failing if multiple rules existed due to
inheritance from higher level objects.
* Resolved issue with unhandled error when used didn't have permissions
for get-acl.
Changed from setauditrule to addauditrule, see comment in script for reasoning.
Fixed state absent to be able to remove multiple entries if they exist.
* fixed docs issue
* updated to fail if invalid inheritance_rule when defining a file rather than warn
Module allows you to wait for a bigip device to be
"ready" for configuration. This module will wait for things like
the device coming online as well as the REST API and MCPD being
ready.
If all of the above is not online and ready, then no configuration
will be able to be made.
* better cleanup on task results display
callbacks get 'clean' copy of result objects
moved cleanup into result object itself
removed now redundant callback cleanup
moved no_log tests
* moved import as per feedback
In this refactor we moved to the most recent coding standards for
both F5 and Ansible. Many bugs were fixed and some features were
also added (such as ipv6 support).
New conventions for ansible warrant fixes to accomodate those
in bigip_partition.
This patch also includes an import fix that can raise an error when
Ansible unit tests run
This adds a new type of vault-password script (a 'client') that takes advantage of and enhances the
multiple vault password support.
If a vault password script basename ends with the name '-client', consider it a vault password script client.
A vault password script 'client' just means that the script will take a '--vault-id' command line arg.
The previous vault password script (as invoked by --vault-password-file pointing to an executable) takes
no args and returns the password on stdout. But it doesnt know anything about --vault-id or multiple vault
passwords.
The new 'protocol' of the vault password script takes a cli arg ('--vault-id') so that it can lookup that specific
vault-id and return it's password.
Since existing vault password scripts don't know the new 'protocol', a way to distinguish password scripts
that do understand the protocol was needed. The convention now is to consider password scripts that are
named like 'something-client.py' (and executable) to be vault password client scripts.
The new client scripts get invoked with the '--vault-id' they were requested for. An example:
ansible-playbook --vault-id my_vault_id@contrib/vault/vault-keyring-client.py some_playbook.yml
That will cause the 'contrib/vault/vault-keyring-client.py' script to be invoked as:
contrib/vault/vault-keyring-client.py --vault-id my_vault_id
The previous vault-keyring.py password script was extended to become vault-keyring-client.py. It uses
the python 'keyring' module to request secrets from various backends. The plain 'vault-keyring.py' script
would determine which key id and keyring name to use based on values that had to be set in ansible.cfg.
So it was also limited to one keyring name.
The new vault-keyring-client.py will request the secret for the vault id provided via the '--vault-id' option.
The script can be used without config and can be used for multiple keyring ids (and keyrings).
On success, a vault password client script will print the password to stdout and exit with a return code of 0.
If the 'client' script can't find a secret for the --vault-id, the script will exit with return code of 2 and print an error to stderr.
* documentation was not inline with other Ansible modules
* Python 3 specific imports were missing
* monitor_type is no longer required when creating a new pool; it is now the default.
* A new monitor_type choice of "single" was added for a more intuitive way to specify "a single monitor". It uses "and_list" underneath, but provides additional checks to ensure that you are specifying only a single monitor.
* host and port arguments have been deprecated for now. Please use bigip_pool_member instead.
* 'partition' field was missing from documentation.
* A note that "python 2.7 or greater is required" has been added for those who were not aware that this applies for ALL F5 modules.
* Unit tests were fixed to support the above module
* Correct usage for shutil.rmtree
Fix adds correct usage of shutil.rmtree in git module
Fixes: #31225
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Include archive tests so they get run
* Use new include syntax
* Cleanup syntax on git tests
- use multi-line YAML
- remove unneeded {{ }} around vars in conditionals
- remove unneeded quotes
- add task file name to task names for easier troubleshooting when things fail
* Make archive tests work for RHEL/CentOS 6
The older versions of Jinja2 in RHEL/CentOS 6 required assertion tasks using the map filter to be skipped.
The older version of git required gzip compression to be skipped on RHEL/CentOS 6.
* Account for ansible_distribution_major_version missing
* Adding a cli transport option for the bigip_command module.
* Fixing keyerror when using other f5 modules. Adding version_added for new option in bigip_command.
* Removing local connection check because the F5 tasks can be delegated to any host that has the libraries for REST.
* Using the network_common load_provider.
* Adding unit test to cover cli transport and updating previous unit test to ensure cli was not called.
* Initial CD-ROM support
* create cdrom bugfix
* Improving CDROM change detection and fixing template creation bug
Running MarkAsTemplate on an existing template will fail with an error
* Better change detection for guest ID
Should only mark a change in case it actually changes
* Adding integration tests
* Pep8 compliance fixes
* Adding CDROM support, including iso, client and none types
* Updating added release version for CDROM option
* Fix rollback in junos_config
Fixes#30778
* Call `load_configuration` with rollback id in case
the id is given as input
* Pass rollback id to `get_diff()` to fetch diff from device
* Fix unit test
- old functionality is still available direct lookup use, the following are equivalent
with_nested: [[1,2,3], ['a','b','c']]
loop: "{{lookup('nested', [1,2,3], ['a','b','c'])}}"
- avoid squashing with 'loop:'
- fixed test to use new intenal attributes
- removed most of 'lookup docs' as these now reside in the plugins
* Remove sysctl entry when state=absent
* Cleanup sysctl integration test syntax
* Correct grammar on error message
* Add sysctl integration test for state=absent
* [rpm_key] Fix to import first key on the system
Fixes: #31483
* [rpm_key] removed unsafe_shell and "throwaway" underscore
* [rpm_key] adding test to add the first key on system
* Added warning for 'force' option
* Changed 'profiles' type to list
* Changed 'interfacetypes' type to list
* Added deprecation warning and fixed doc
* updated force parameter
* Remove cloudstack, f5, and nxos from the wildcard import whitelist
* Remove nxos and f5 from the get_exception whitelist
* Remove some files from the pep8 legacy whitelist
* win_become: Added support to become a service user
* fixes for linting
* changes to get local and network service working
* fixed linting issues again
* pleasing pepe
* Make ansible_selinux facts a consistent type
Rather than returning a bool if the Python library is missing, return a dict with one key containing a message explaining there is no way to tell the status of SELinux on the system becasue the Python library is not present.
* Fix unit test
* Add update_only parameter for yum module
When using latest, `update_only: yes` will ensure that only existing
packages are updated and no additional packages are installed.
* Update yum.py
Update version added for `update_only` parameter to 2.5
* add unit tests for update_only flag in yum module
* Add new lines to end of config file lines
* Properly write out selinux config file
Change module behavior to not always report a change but warn if a reboot is needed and return reboot_required.
Improve the output messages.
Add strip parameter to get_file_lines utility to help with parsing the selinux config file.
* Add return documentation
* Add integration tests for selinux module
* Use consistent capitalization for SELinux
* Use atomic_move in selinux module
* Don't copy the config file initially
There's no need to make a copy just for reading.
* Put message after set_config_policy in case the change fails
* Add aliases to selinux tests
* win_become: move error handling to Ansible outside of shell
* trimmed the output so double newlines don't get set
* added test for non-zero exit code
* missed issue URL on test
* changed exit to SetShouldExit
The /etc/os-release based distro detection doesn't
seem to work for Ubuntu 10.04 (no /etc/os-release?).
So it was testing the next case which was /etc/lsb-release to
see if it is 'Mandriva'. Since the check for existence of
(/etc/lsb-release, Mandrive) was the first non-empty dist
file match, 'ansible_distribution' was being set to 'Mandriva'
expecting to be corrected by the data from the dist file content.
But since the dist file parsing for Mandriva didn't match for
Ubuntu 10.04 /etc/lsb-release _and_ there is no Debian specific
lsb-release check, 'ansible_distribution' stayed at 'Mandriva'
and the dist file checking loop keeps going and eventually off
the end of the list before finding a better match.
Adding a debian/ubuntu specific check for /etc/lsb-release after
the debian os-release sets the info correctly and stops further
checking of dist files.
Fixes#30693
In cli.CLI.unfrack_path callback, special case if the
value of '--output' is '-', and avoid expanding
it to a full path.
vault cli already has special cases for '-', so it
just needs to get the original value to work.
Fixes#30550
* Added support to retrieving LIG resources in HPE OneView
* Fixing copyright header according to review
* Swapping out config for full credentials in parameter for documentation
* Added support to retrieving Enclosures in HPE OneView
- Added unit tests
* Updated version_added to 2.5
* Changing return type of enclosure_script to string
* Fixing copyright header according to review
* Replaced config for credentials in parameters for documentation
Fix adds a new module 'vmware_guest_powerstate' to manage
power states of virtual machine.
Fixes: #30371
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Fix fact failures cause by ordering of collectors
Some fact collectors need info collected by other facts.
(for ex, service_mgr needs to know 'ansible_system').
This info is passed to the Collector.collect method via
the 'collected_facts' info.
But, the order the fact collectors were running in is
not a set order, so collectors like service_mgr could
run before the PlatformFactCollect ('ansible_system', etc),
so the 'ansible_system' fact would not exist yet.
Depending on the collector and the deps, this can result
in incorrect behavior and wrong or missing facts.
To make the ordering of the collectors more consistent
and predictable, the code that builds that list is now
driven by the order of collectors in default_collectors.py,
and the rest of the code tries to preserve it.
* Flip the loops when building collector names
iterate over the ordered default_collectors list
selecting them for the final list in order instead
of driving it from the unordered collector_names set.
This lets the list returned by select_collector_classes
to stay in the same order as default_collectors.collectors
For collectors that have implicit deps on other fact collectors,
the default collectors can be ordered to include those early.
* default_collectors.py now uses a handful of sub lists of
collectors that can be ordered in default_collectors.collectors.
fixes#30753fixes#30623
Avoid the following seen when running ec2_ami tests on python3,
presumably because the return type of `map` is different between
python2 and python3.
```
Traceback (most recent call last):
File "/tmp/ansible_e44v27uj/ansible_module_ec2_snapshot_facts.py", line 242, in <module>
main()
File "/tmp/ansible_e44v27uj/ansible_module_ec2_snapshot_facts.py", line 238, in main
list_ec2_snapshots(connection, module)
File "/tmp/ansible_e44v27uj/ansible_module_ec2_snapshot_facts.py", line 193, in list_ec2_snapshots
snapshots = connection.describe_snapshots(SnapshotIds=snapshot_ids, OwnerIds=owner_ids, RestorableByUserIds=restorable_by_user_ids, Filters=filters)
File "/usr/local/lib/python3.5/dist-packages/botocore/client.py", line 312, in _api_call
return self._make_api_call(operation_name, kwargs)
File "/usr/local/lib/python3.5/dist-packages/botocore/client.py", line 575, in _make_api_call
api_params, operation_model, context=request_context)
File "/usr/local/lib/python3.5/dist-packages/botocore/client.py", line 630, in _convert_to_request_dict
api_params, operation_model)
File "/usr/local/lib/python3.5/dist-packages/botocore/validate.py", line 291, in serialize_to_request
raise ParamValidationError(report=report.generate_report())
botocore.exceptions.ParamValidationError: Parameter validation failed:
Invalid type for parameter OwnerIds, value: <map object at 0x7ff577511048>, type: <class 'map'>, valid types: <class 'list'>, <class 'tuple'>
```
https://github.com/ansible/ansible/pull/30435#issuecomment-330750498
* Save the serialized values instead of their types
* Add tests for creating and modifying VMs without using a template
* Remove blank line
* Add tests for vm deletion
* Fix cloudwatchevent_rule exception handling
Where it is currently present, this change fixes the exception handling.
However, there are many places that it is lacking.
Fixes#30806
* Add new exception handling for cloudwatchevent_rule
Ensure all API calls are wrapped with exception handling
* PEP8 tidy up
* Remove unnecessary HAS_BOTO3 import and checks
Tidy up documentation so that NO_QA can be removed
* Use vault_id when encrypted via vault-edit
On the encryption stage of
'ansible-vault edit --vault-id=someid@passfile somefile',
the vault id was not being passed to encrypt() so the files were
always saved with the default vault id in the 1.1 version format.
When trying to edit that file a second time, also with a --vault-id,
the file would be decrypted with the secret associated with the
provided vault-id, but since the encrypted file had no vault id
in the envelope there would be no match for 'default' secrets.
(Only the --vault-id was included in the potential matches, so
the vault id actually used to decrypt was not).
If that list was empty, there would be an IndexError when trying
to encrypted the changed file. This would result in the displayed
error:
ERROR! Unexpected Exception, this is probably a bug: list index out of range
Fix is two parts:
1) use the vault id when encrypting from edit
2) when matching the secret to use for encrypting after edit,
include the vault id that was used for decryption and not just
the vault id (or lack of vault id) from the envelope.
add unit tests for #30575 and intg tests for 'ansible-vault edit'
Fixes#30575
* Fix 'distribution' fact for ArchLinux
Allow empty wasn't breaking out of the process_dist_files
loop, so a empty /etc/arch-release would continue searching
and eventually try /etc/os-release. The os-release parsing
works, but the distro name there is 'Arch Linux' which does
not match the 2.3 behavior of 'Archlinux'
Add a OS_RELEASE_ALIAS map for the cases where we need to get
the distro name from os-release but use an alias.
We can't include 'Archlinux' in SEARCH_STRING because a name match on its keys
but without a match on the content causes a fallback to using the first
whitespace seperated item from the file content as the name.
For os-release, that is in form 'NAME=Arch Linux'
With os-release returning the right name, this also supports the
case where there is no /etc/arch-release, but there is a /etc/os-release
Fixes#30600
* pep8 and comment cleanup
* Fix pkg_mgr fact on OpenBSD
Add a OpenBSDPkgMgrFactCollector that hardcodes pkg_mgr
to 'openbsd_pkg'. The ansible collector will choose the
OpenBSD collector if the system is OpenBSD and the 'Generic'
one otherwise.
This removes PkgMgrFactCollectors depenency on the
'system' fact being in collected_facts, which also
avoids ordering issues (if the pkg mgr fact is collected
before the system fact...)
Fixes#30623
* Fix nxos provider transport warning issue
* Add default value of transport arg in provider spec
* Remove default value if transport arg in top level spec
This ensure deprecation warning is seen only in case transport
is given as a top level arg in task
* Refactor nxos modules to reference transport value from provider
spec
* Fix unit test
* Remove transport arg assignment in nxos action plugin
* As assigning transport value is handled in provider spec
top level task arg assignment is no longer required
* win_scheduled_task_stat: add new module to get stat on scheduled tasks
* fixed up linting errors and aliases file
* I should learn how to spell
* removing URI from test
* added state information for the task
* removed argument so task stays running
* Undeprecate ec2_elb_*
* Make ec2_elb* full fledged modules rather than aliases
* Split tests for ec2_elb_lb and elb_classicb_lb
* Change names in documentation of old and new elb modules
Add tests for ec2_elb_lb
As discussed before we selected win_environment to the documentation,
and point to win_uri for a more advanced module.
If we want to make this the reference module, we have to get this one
absolutely right in every possible way.
This PR cleans up both win_environment and win_uri, and makes the
required changes to the windows module development section.
This PR includes:
- An important fix to charset encoding of from address
- Documentation and examples cleanup
- PEP8 fixes
- Warning on insecure access
- Strict parameter typing
- More modern interface (using lists rather than comma, space or pipe-delimited strings)
- Warn on failure to send mail to some recipients
```
[WARNING]: Failed to send mail to 'foobar': 550 5.1.1 <foobar>:
Recipient address rejected: User unknown in local recipient table
```
- Warn on failure to parse some headers
```
[WARNING]: Skipping header 'Foobar', unable to parse
```
- Return failed recipients as return value
- Changed default encoding to utf-8
* Add Routing Engine Facts
- Map routing engine output information to routing_engines facts dict.
- Add fact 'has_2RE', which is a quick way to determine how many REs
the chassis has.
* Fix a typo
* Fix more typos
* Add slot number to routing_engine dict
* Add facts about the installed chassis modules
* Fix typo
* Fixed another typo
* Fix Path
* Change path again.
* More Typos
* Add some deubgging
* Add additional information for hardware components.
- Return information about the Routing Engines.
- Return a fact to easily determine if the device
has two routing engines.
- Return information about the hardware modules.
* Addressed pep8 stardard failures.
* Add unit test fixtures.
* Rename fixture.
* Fix unit test failures.
- Rename the fixture file to what the unit test expects.
- Strip out junos namespace attributes.
Rename file to match what the unit test expects.
* Scrubbed the routing engine serial numbers.
* Add unit test facts for new tests.
- Add unit test for ansible_net_routing_engines fact
- Add unit test for ansible_net_modules fact
- Add unit test for ansible_net_has_2RE
* Fixed spacing.
Provide all necessary permissions for AMI tests
Allow tests to run in us-east-2
Ensure `always` section gets used
Update tests to ensure that cleanup works better, and add
deletion idempotency test
* win_scheduled_task: rewrite for additionality functionality and bug fixes
* fixes for docs and os version differences
* started with the testing
* doc fix
* added more tests
* added principals tests
* finished tests for win_scheduled_task rewrite
* feedback from PR
* change to fail when both new and deprecated args are set
* change diff variable to match new standard and update doc sentance
* Don't ask for password confirm on 'ansible-vault edit'
This is to match the 2.3 behavior on:
ansible-vault edit encrypted_file.yml
Previously, the above command would consider that a 'new password'
scenario and prompt accordingly, ie:
$ ansible-vault edit encrypted_file.yml
New Password:
Confirm New Password:
The bug was cause by 'create_new_password' being used for
'edit' action. This also causes the previous implicit 'auto prompt'
to get triggered and prompt the user.
Fix is to make auto prompt explicit in the calling code to handle
the 'edit' case where we want to auto prompt but we do not want
to request a password confirm.
Fixes#30491
Unittests are sometimes run without network connectivity in build
systems. Make that work correctly by mocking out _get_url_data with the
expected return value.
* windows: fix list type in legacy module utils
* only change the return for the list type instead of affecting it all
* additional null check when using an array
As-merged, had several issues that prevented idempotent usage. Some args were defined at the wrong UI level. Dual-state args didn't match up with typical Ansible UI.
* Adds nxos_pim_rp_address integration test role for group_list,
prefix_list and route_map (cli and nxapi)
* * Adds explicit removal of static RP configs to match cli behaviour
* * Removes config deletion using nxos_config module (for 2.4 only)
* * Attempt short and long delete config command
* Add a platform check for N3K for bidir
* Replace pause in integration tests with until.
Use resource prefix instead of generating a random number
Only try to delete keys if they exist
* Add alias to tests
keyUsage and extendedKeyUsage are currently statically limited via a
static dict defined in modules_utils/crypto.py. If one specify a value
that isn't in there, idempotency won't work.
Instead of having static dict, we uses keyUsage and extendedKyeUsage
values OpenSSL NID and compare those rather than comparing strings.
Fixes: https://github.com/ansible/ansible/issues/30316
Current openssl_certificate is mistakenly taking its derivating its
version number from the csr version number.
Thos two fields are completly unrelated and hence the version number of
the certificate should be able to be directly specified (via
selfsigned_version parameter).
* openssl_certificate: Fix parameter assertion in Python3
Parameter assertion in Python3 is broken. pyOpenSSL get_X() functions
returns b'' type string and tries to compare it with '' string, leading
to failure.
The error mentionned above has been fixed by sanitizing the inputs from
a user to the assert only backend.
Also, this error was hidden by the fact that the improper check method
was called in the generate() functions.
* Add simple integration test for openssl_certificate
* remove subject == issuer assertion
* run integration tests only on supported hosts
* change min supported version to 0.15.x
* Add test for more CSR fields
* also convert dict members to bytes
* fix version_compare
* openssl_{csr, certificate}: Fail if pyOpenSSL <= 0.15
Previous 0.13 pyOpenSSL was a C-binding, and required the parameter
passed to add_extention to be in ASN.1. This has changed with the move
to 0.14 and it is now all pythong and string based.
Previous the 0.15 release, the `get_extensions()` method didn't exist,
since the modules rely heavily on it we ensure pyOpenSSL version is at
last 0.15.0.
* check pyopenssl version in openssl_csr integration test
* Clean up nxos_snmp_contact & nxos_snmp_location
* Bring nxos_snmp_community in line
* Bring nxos_snmp_host in line
* And I would have gotten away with it too,
if it weren't for those meddling sanity tests
* Bring nxos_snmp_traps & nxos_snmp_user in line
* Appease Shippable
* ini_file: add integration test
Start integration tests for ini_file module.
* ini_file test: add comments for lisibility
* update from review: use var instead of checksum to assert content
* fixes#26623
* Test-Path (and thus `-type path` in Get-AnsibleParam) fail on a nonexistent drive letter, since it can't be mapped to a PSProvider.
* added support and basic smoke tests for
* Correctly validate module name for modules with aliases
If a module has an alias (ie is a symlink) then we need to ensure that
DOCUMENTATION.module is set to the main name, not the aliased name
* formatting
* Show warning when using pylint on Python 2.6.
* Add pylint disable entries for Python 2.
* Fix unicode handling in ansible-test.
* Add missing documentation.
* refactor firewalld module with object abstraction
This change creates a FirewallTransaction object that each
individual transaction type is a sub-class of as they all follow the
same pattern to enable or disable something in the firewall.
Also, there's a few bugfixes here:
- Fix the "source" type to handle permanent operations
- Remove ambiguity of required parameters for only specific use
cases that can lead to transactions effectively being a no-op.
Instead, pick sane defaults and document them.
- Change how imports are done so globals are no longer needed
This is based on the original feedback by Toshio from the last
refactor attempt:
https://github.com/ansible/ansible-modules-extras/pull/3383
Signed-off-by: Adam Miller <maxamillion@fedoraproject.org>
* fix line too long for pep8 for shippable tests
Signed-off-by: Adam Miller <maxamillion@fedoraproject.org>
* remove firewalld from pep8/legacy-files
Signed-off-by: Adam Miller <maxamillion@fedoraproject.org>
from __future__ unicode_literals leads to developer confusion as
developers no longer can tell whether a bare literal string is a byte
string or a unicode string. Explicit marking as u"" or b"" is the way
to solve the same problem in the Ansbile codebase.
* This commit includes a unit test to exercise the _is_role
function and make sure it doesn't break in any Python version.
* Import os.path and other minor fixups
On setup we set it to 'switch', so teardown should be 'switch'.
Also, using inventory_hostname breaks the test, since in our CI
it's a long UUID string, which exceeds the 32 chars maximum for setting
a hostname on NXOS.
* Update elasticsearch_plugin.py
Change module to work with Elasticsearch 2.x and 5.x automatically.
Update examples and docs.
Supersedes #21989
* Check system paths for elasticsearch-plugin binary
Use get_bin_path from basic.py for searching paths.
* Create a copy of PLUGIN_BIN_PATHS rather than modifying the global
* Use provided plugin_bin path first before trying other places
Change global PLUGIN_BIN_PATHS to a tuple
* Divide Windows integration tests into 2 groups.
* Support `none` for `--changed-all-target`.
* Run 2 separate Windows groups on Shippable.
* Only run smoketest and minimal for the group1 job.
* Add EOS provider options as subspec
* Add IOS provider options as subspec
* Add IOS XR provider options as subspec
* Add Junos provider options as subspec
* Add NX-OS provider options as subspec
* Add Vyos provider options as subspec
* Remove password checks from check_args
* Do the same to aireos, aruba, ce, dellos*, & sros, as they work the same way
* VyOS does not support `transport`
* module should fail if eos_user is added without configured_password or nopassword or sshkey
Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>
* fix eos_user unit test
Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>
* fix eos_user integration test
Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>
Ansible-test will consume group_vars from test/integration, as it runs
from that working directory. This causes problems if we specify vars
in inventory as they have higher precedence, plus it gives the impression
to users those group_vars can be reused.
Leaving vyos since it's configured to run in Shippable and apparently
it breaks if there are no group_vars in the test/integration folder.
* Fix junos_user pruge option failures
Fixes#25989
Add seperate handling for purge option which
fetches configured users on remote device
and delete the one not present in aggregate
list.
* Minor changes
* Remove network integration group_vars/host_vars
We use our own inventory in DCI, which is passed to ansible-test
with --inventory.
However, as the working directory of ansible-test is set to
test/integration, ansible consumes the repo group_vars/host_vars.
That imposes a problem, since they have greater precedence to
inventory variables.
Let's just remove group_vars/host_vars so end-users can assume
those vars can be used, the inventory and group/host vars are
environment dependent, each user should create their own.
* Restore files I git rm'd by mistake
* Add FcoeNetworkFactsModule for retrieving HPE OneView FCoE Networks
- Allow querying for FCoE Network resources in HPE OneView
- Adds unit tests to new module
* Fix "required: no"
* Add NetworkSetFactsModule for retrieving HPE OneView Network Sets
- Allow querying for Network Set resources in HPE OneView
- Adds unit tests to new module
- Updates oneview_module_loader copyright header to short GPL3 version
* Adding possibility to pass in credentials as parameters
* Removed required false and changed format of filter_by_name declaration
* Updated examples in docs to reflect new way to pass in credentials
- All examples of the oneview_network_set_facts updated to use
credential parameters
- All required=False from oneview base module removed
- Shared docs updated to bring attention to API version being used
* add template for az func
* (wip) add basic azure functions support
* add support to add app settings to azure function
* add support for updating based off of app settings
* add integration tests and refactor required param
* support check mode and add facts module
* add test for azure functions facts module
* add necessary checks and registrations for web client
* fix documentation
* change return type from complex to dict
* disable azure_rm_functionapp tests until stable
* remove dict comprehension for py2.6
* pepe has whitespace tumor
* Adding acs module
* linter issue
* Reduce the VM Size for the int. tests
* Short the name of the cluster
* Fixing the asserts and title
* Fixing VM Scale count in int. tests
* Changing the location of the tests
* trying eastus2
* disabling acs CI tests until stabilized
* new facts module for dns zone
integration tests and new module for dns zone facts
* use vairable for domain name
* add nondeterministic piece to domain name
* fix azure_rm_dnszone_facts examples
* create new module for record set facts
added new module to get facts for dns zone record sets
* use variable for domain name
* correct lint error
* add nondeterministic piece to name
* fix azure_rm_dnsrecordset_facts examples
* replace duff commit version of win_toast
* change expire_mins to expire_secs and add example showing use of async
* fix metadata version to keep sanity --test validate-modules happy
* code review fixes and change expire_secs to expire_seconds
* add first pass integration tests for win_toast
* win_toast no longer fails if there are no logged in users to notify (it sets a toast_sent false if this happens)
* yaml lint clean up of setup.yml in win_toast integration tests
* improve exception and stack trace if the notifier cannot be created, following feedback from dag
* removed unwanted 'echo' input parameters from return vals; added to CHANGELOG.md, removed _seconds units from module params; updated tests to match
lint
Update integration test
handle check_mode
handle warnings
Removing the empty tags check
Updating author handle
To use github handle
Changing from warn to fail
disabled tests
* First version of managed disks: Multiple methods for creating, one get and one delete
* My name is too cool to be there
* Passing pep8 test
* Create and delete empty working
* Module for testing, lacks sense of setting state changed for unchanged operations
* Checking that actual changes are done to update status changed
* First version of the integration test
* Adding the dictionary to translate the facts, without using serializer
* Adding the serializer to managed disk
* Using native serializer in managed disks facts
* Added DiskSku to pass the whole class to the disk instead of a string
* Bumping version
* Passing sanity checks
* Aparently they Id is not returned by the serilizer
* Integration test
* Latest version
* Using my own serializer, the one in commons is not working for me
* Managed disks module support for ansible
* Updating my github account username in the file
* Sanity checks were missing in facts and integration test
* Fixing typo in source_resource_uri and removed AzureHTTPErrors
* Update tags are working now
* Integration test for tags
* Added support for tags, added check mode, corrected style
* (wip) add partial loadbalancer module
* (wip) add ability to use a public ip for a load balancer
* fix shebang
* add backend address pool to load balancer
* remove unncessary error variable
* add probe support to load balancer
* add ability to add load distribution rule to load balancer
* add nat pool functionality to azure load balancer
* fix pep8 errors from sanity check
* add documentation for load balancer
* refactor imports
* fix license header copyright
* add facts module for azure load balancer
* fix ansible-test failures
* add integration tests for load balancer
* fix metadata version
* add complex integration test to azure_rm_loadbalancer
* Adds win_pagefile module
* Fixed win_pagefile doc
* Fix win_pagefile doc
* Fix win_pagefile doc variable convention
* Added check_mode
* Changed win_pagefile module&doc to the convention
* added win_pagefile integration tests
* Changed check_mode blocks to whatif, fixed a bug
* Added whatif to set-wmiinstance, changed docs
Added whatif in Set-WMIInstance
Added dots to end of decription lines
* Returns to original state at the end, more tests
Added override and no override integration tests
Pagefiles now return to same state as before at the end of the integration test
* Remove extra line
* Added test_path var to win_pagefile
* Set test_path as 'no' in integration
* Added unit to docs and enclosed exception message
* More granular try-catch blocks
* Added workaround to avoid value out of range
* Deleted wrong line ending
* Changed license to one-line
* Removed space in line ending
* Try to fix python2.6 error
* Try 2 to fix python2.6 error
* Add separating line again
* Add the ability to modify shard count to kinesis_stream module
* Fixed an issue in kinesis_stream where update() reports not changed when it is changed
* Remove unreachable message and make the try and catch block shorter
* added windows module win_power_plan with integration test
integration testing updated to handle skipping 2008 while testing that
module provides helpful error
* minor docs fix
* my fault, too many spaces
* #18807 win_firewall_rule uses HNetCfg.FwPolicy2 COM object
* Added missing tests
* Added support for InterfaceTypes property
* Added support for EdgeTraversalOptions property
* Added SecureFlags property
* Port ranges are not possible in W2K8
* Added windows version checks
* Fixed doc: removed 'force' option and all notes
* Fixed copirights and docs
* added azure vm extensions support
* added auto_update_minor_version and protected_settings
* update docs
* added get_poller_result
* fixed test failures
* remove tags and check mode
* Include Integration Tests
Include Integration Test for azure_rm_virtualmachine_extensions.py
* Correct location for integration test files
* Revert "Fix leading slashes being stripped from mount src (#24013)"
This reverts commit 3251aecd95.
* Revert "Convert value of port and timeout in provider to integer (#28732)"
This reverts commit a914a39975.
* Revert "fix nxapi nxos tests (#28762)"
This reverts commit 4137169b21.
* Tidy mount module for testing
Fix spelling mistakes in comments. I *think* the example for omitting parents
root has the wrong parent ID.
Make mountinfo file a parameter for testing.
* Don't strip leading slash from mounts
The current code does not follow the example, it produces src=tmp/aaa instead
of src=/tmp/aaa. This causes problems with bind mounts under /rootfs.
* Use dictionary to store mounts by ID
Instead of looping over each one to check if the ID matches. This does not
preserve the order of the output on < Python3.6, but that is not necessary.
* Make linux_mounts a dict
Always accessed by 'dst', so avoid looping by just making it a key.
* Add test case for get_linux_mounts
We need to use IP address, as inventory_hostname returns an UUID from
openstack.py inventory in our CI.
Also, commenting the username/pass as we set them in the inventory (we shall
change this in the future).
* rewrite of win_package to enable win_msi deprecation
* fix some minor doc issues
* Removed exe tests
* dag's changes seem to be missing, re-add them
* fixed yaml for return values
* Check registry to find RabbitMQ installation path
* Integration tests for win_rabbitmq_plugin
* Added himself to BOTMETA.yml
* Skipped running tests on Windows 2008 SP2
* npm: fix idempotence
* Better idempotency fix
More intelligently add --production rather than depending on hard coded order in args list
Cleanup boilderplate imports and license
PEP8 fixes
* make groups magic var dependant on inventory
it was overtly restricted by 'host'
minor fixes to test_var_manager.py, need to test other values also
* pepe hates extra blank line
- Fixes to lambda
- reformatting + tests for lambda_facts
- lambda module integration test
- switch lambda and lambda_facts to AnsibleAwsModule
- Get the account ID from STS, GetUser, and finally error message
* Update RDS parameter group for boto3
* Update to boto3
* Update to latest ansible standards
* Remove choices list for valid engines (See #19221 for context)
* Allow tagging
* Return some useful information, and document that information
* Add tests for rds_param_group
* Improve testing of rds_param_group
* Add purge_tags option for rds_param_group
* Fix remaining broken rds_param_group tests
* Ensure the group name is lowercased. Fixes integration tests when run on OSX
Fix adds refactor of code for find_host_by_cluster_datacenter
API in vmware_host and vmware_resource_pool.
Also, adds strict check for cluster and datacenter object find.
Testcase for vmware_resource_pool.
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Added FcNetworkFactsModule to query FC Network Resources in HPE OneView
- Added unit tests
* Removing unnecessary quotes from example and documentation
* Module for uploading templates into vDirect server
Module for uploading configuration and workflow templates
into Radware vDirect server
* Module for uploading templates into vDirect server
Module for uploading configuration and workflow templates
into Radware vDirect server
This PR includes:
- Improvements to change-detection by comparing 2 objectified XML trees
- Implement better integration tests by comparing 2 files using copy
* Add VPN module and unittests
* remove unnecessary imports
* fix documentation
* raise custom exception rather than passing module everywhere
* remove recordings
Rerecord tests
Fix docs
Ensure vpn_connection_id is a list of strings when checking if it exists
* fix check mode
* Rerecord tests
* remove superfluous code and comments and make exception handling uniform
fix docs
* Fix ec2_vpc_vpn documentation
* make ec2_vpc_vpn compatible with python 2.6 and make check mode logic more succinct
* fix comparison of list of dicts
* Fix typos and docstrings
make requested changes for imports
make code clearer
* Fix copyright and metadata version.
* Adding module to manage ethernet network on HPE OneView
* Adding unit tests to EthernetNetwork module
* Added OneViewModuleException custom exceptions to module
- Removed exception imports from hpOneView
- Updated unit tests
* Fixing mock import inside ethernet network module unit test
* Fixing issues found in METADATA by CI
* Updated paths to use solution name instead of vendor name
* Fixed documentation, removed redundant if and improved readability
* Updated _bulk_present to use and return `result`, same way as _present
* Changed __ to _ in private methods following ansible style
* Fixed some example inconsistencies and turned states doc into a list
* Added adriane-cardozo to list of maintainers
So the module was now not doing anything except adding a nic to a
vswitch. This PR adds idempotency checks, and removal checks.
We should probably add modification chacks as well, but I don't know
what the limitations are for vcsim.
* New module for AWS Direct Connect connections
Unittests for new module
Added utils that will be used by other Direct Connect modules
* pep8 fixes
* Correct aws_direct_connect_connection EXAMPLES to be valid yaml
* Make requested changes
* remove use of the variable changed
get rid of unnecessary parentheses
* Fix unit test
* Rename variable.
* Fix metadata version
* Add module_utils/aws/direct_connect.py for frequently used functions
* new AWS Direct Connect link aggregation group module with tests and placebo recordings
* remove extra argument
* Remove use of undefined var
* Fix param name for extra exception codes for AWSRetry to use.
* Fix undefined var and line length and metadata version number
* Fix copyright headers
* Added new oneview_fcoe_network module and unit tests
* Fixing metadata issues and importing unittest from ansible.compat.tests
* Fixing shebang and adding correct copyright header
* Renamed remote_management/hpe to remote_management/oneview
* Updated documentation and default state according to review comments
- Added present as the default state
- Added delegate_to: localhost in all examples
- Changed config path from a variable to illustrate a location
- Other documentation fixes
* Added the ability to extend the exception list in CloudRetry
* AWSRetry boto and boto compatible
* Updated tests to reflect boto/boto3
* Added boto to shippable requirements
* Have base_class and added_exceptions default to None in CloudRetry
AWSRetry - only retry on boto3 exceptions and remove boto requirement from tests
* Make requested changes.
* win_wait_for: added module
* Increased timeout on async task
* added more debug messages for test debug
* revert to using win_shell instead of win_command
* rebased from master and updated copyright string
* Updated metadata version
* Capitalised start of short_description
* disabled win_wait_for tests until async issues are solved
* Add tags support to cloud/amazon/ec2_group
* Finish making ec2_group tag support boto3 compatible.
Add integration tests to validate that tags are working as expected.
* Improvements and fixes in the packet_device module
* add version_added to new args
* remove default value from facility
* changed 'lock' from deprecated arg to alias of 'locked'
* openssl_privatekey: Extend test coverage
Extend the coverage of the integration test for the module
openssl_privatekey.
New tests have been added:
* passphrase
* idempotence
* removal
Co-Authored-By: Pierre-Louis Bonicoli <pierre-louis.bonicoli@gmx.fr>
* openssl_publickey: Extend test coverage
Extend the coverage on the integration test for the module
openssl_publickey.
New tests have been added:
* OpenSSH format
* passphrase
* idempotence
* removal
* Fix 'the the' typos, fix 'pahting' filename typo
* Change 'the the' typos to a single 'the'.
* Change `playbook_pahting.rst` to `playbook_pathing.rst`.
* Delete trailing space in ec2_vol example
Delete the trailing space in `instance: "{{ item.id }} "`, which makes the
example fail when run because it looks for instance "i-xxxx ".
* win_copy rewrite with new tests and functionality
* minor pep fixes
* Handle UTF-8 filenames in zip
* fix for template
* when zip assemblies are not available in .net revert to old behaviour of copying one by one
* typo fix
* some more typos
* updated logic to correctly handle when new directories can be created
* removed testing file as it is not needed
* updated documentation based on PR
* Move sanity into directory.
* Omit abstract classes from returned subclass list.
* Split sanity tests out into plugins.
* Fix abstract class handling for Python 3.
This was causing wrong behaviour when `prev_state` was `hard`-link,
since the `file` module tried to apply the same `state` on the new
file, causing unexpected errors.
Particularly, both `overlay` and `devicemapper` storage drivers in
docker use hardlinks to share files between layers. This causes
most ansible playbooks to fail when working with files from layers
below.
This PR includes:
- PEP8 compliancy
- A fix to ensure the module fails when it failed for a package
- Various cosmetic changes to documentation
- Make `state: present` the default (and not required)
* Handle errors in jmespath in json_query better
Catch any exceptions raised from jmespath and raise
an AnsibleFilterError instead.
Avoid a traceback.
Fixes#20379
* pep8
* Include .github in test targets. Fix BOTMETA.yml.
* Include bin in compile tests.
* Exclude links from test targets.
* Include bin in pep8 and pylint tests.
* Fix pep8 and pylint issues in bin dir.
We need to run network-integration against platform agnostic modules,
which they all are named as net_* .
There is a hardcoding in executor where if prefix is 'net' the hosts is set
to all, removing these lines to have desired behaviour.
* alternatives: add integration tests
* alternatives: handle absent link (fix AttributeError)
Error occurred at least on Debian Stretch and OpenSuse 42.2:
Traceback (most recent call last):
File "/tmp/ansible_RY6X41/ansible_module_alternatives.py", line 161, in <module>
main()
File "/tmp/ansible_RY6X41/ansible_module_alternatives.py", line 113, in main
current_path = current_path_regex.search(display_output).group(1)
AttributeError: 'NoneType' object has no attribute 'group'
update-alternatives stdout sample:
dummy - manual mode
link best version is /usr/bin/dummy1
link currently absent
link dummy is /usr/bin/dummy
* alternatives: PEP 8 fixes
* alternatives: fix copyright in integration tests
* alternatives: nested loops handle more than 2 items
Thanks to Michael Scherer (@mscherer) for pointing that.
* alternatives: enable integration tests
* refactors nxos_vrf_af module
fixes#27595
* fix up unit test cases
* add commands to result dict
* add route-target on afi create
* adds deprecation note to safi argument
* Add network value to support_by field.
* New support_by value, certified
* Deprecate curated in favor of certified
* Add conversion from 1.0 to 1.1 to metadata-tool
* Add supported by Red Hat field to ansible-doc output
* Ansible Config part2
- made dump_me nicer, added note this is not prod
- moved internal key removal function to vars
- carry tracebacks in errors we can now show tracebacks for plugins on vvv
- show inventory plugin tracebacks on vvv
- minor fixes to cg groups plugin
- draft config from plugin docs
- made search path warning 'saner' (top level dirs only)
- correctly display config entries and others
- removed unneeded code
- commented out some conn plugin specific from base.yml
- also deprecated sudo/su
- updated ssh conn docs
- shared get option method for connection plugins
- note about needing eval for defaults
- tailored yaml ext
- updated strategy entry
- for connection pliugins, options load on plugin load
- allow for long types in definitions
- better display in ansible-doc
- cleaned up/updated source docs and base.yml
- added many descriptions
- deprecated include toggles as include is
- draft backwards compat get_config
- fixes to ansible-config, added --only-changed
- some code reoorg
- small license headers
- show default in doc type
- pushed module utils details to 5vs
- work w/o config file
- PEPE ATE!
- moved loader to it's own file
- fixed rhn_register test
- fixed boto requirement in make tests
- I ate Pepe
- fixed dynamic eval of defaults
- better doc code
skip ipaddr filter tests when missing netaddr
removed devnull string from config
better becoem resolution
* killed extra space with extreeme prejudice
cause its an affront against all that is holy that 2 spaces touch each other!
shippable timing out on some images, but merging as it passes most
* - deprecated panos_address and panos_service in lieu of common panos_object
* - deprecated/removed panos_address and panos_service in lieu for panos_object
* squash! - deprecated/removed panos_address and panos_service in lieu for panos_object
* - fixed PEP8 issues
* - ansible_metadata requires metadata_version instead of just version key in 2.4
* add > to multi line descriptions
* update version string to 2.4
* Update legacy-files.txt
* prompt for new pass on create/encrypt if none specified
Make 'ansible-vault' edit or encrypt prompt for a password
if none or provided elsewhere.
Note: ansible-playbook does not prompt if not vault password
is provided
* dont show vault password prompts if not a tty
* Fail if an empty string is set as src for copy module
Fixes#27363
* Cleanup task formatting on copy tests
Use multi-line YAML
Add debug statements with verbosity: 1 rather than leave them in there commented out.
* Add test for empty string as source
* Do more checks in order to add more specific errors messages
Add more integration tests for the various failure scenarios.
Cleanup some syntax on existing integration test tasks.
* Add config option for a default list of vault-ids
This is the vault-id equilivent of ANSIBLE_DEFAULT_PASSWORD_FILE
except ANSIBLE_DEFAULT_VAULT_IDENTITY_LIST is a list.
* Better handling of empty/invalid passwords
empty password files are global error and cause an
exit. A warning is also emitted with more detail.
ie, if any of the password/secret sources provide
a bogus password (ie, empty) or fail (exception,
ctrl-d, EOFError), we stop at the first error and exit.
This makes behavior when entering empty password at
prompt match 2.3 (ie, an error)
* Add comment option to authorized_keys
* Update version_added for authorized_keys comment
* PEP8
* Include index rank in parsed_key_key
* Properly display diff
Only display diff if specificed via settings
* Fix PEP8 test failure
Removed from legacy files since it is now properly formatted
* Cleanup integration test formatting and add test for new comment feature
* Correct version_added for new option
* Add intent arguments for ios_interface
* Intent argument support
* Integration test case for intent arguments
* Fix ci issue
* Add intent arguments for iosxr_interface
* Add intent check support for iosxr_interface
* Integration test for intent + configuration
* Fix ci failure
* Handle common agrument in aggregate parameter for vyos module
* Add supoort to set parameter in aggregate to it's respctive
top level argument if value not provided in aggregate.
* Aggregate argument spec validation
* Documentation for aggregate
* Fix unit test failure
* circonus_annotation: clean description
- add 'default' field
- default value for 'required' field is false
- use formatting function
* circonus_annotation: clean argument_spec
remove useless conversion
default of 'required' False
use 'default' when possible
* circonus_annotation: fix pep8
* circonus_annotation: add RETURN block
* circonus_annotation: check_mode isn't supported, add a note
* [password] _random_password -> random_password and moved to util/encrypt.py
* [passwordstore] Use built-in random_password instead of pwgen utility
* [passwordstore] Add integration tests
* First batch of modules renamed from plural to singular
Related to this proposal: https://github.com/ansible/proposals/issues/10
* Emit rename deprication warning
* Update legacy-files.txt and skip.txt to reflect new names
1fe67f9 introduced retries to the ssh connection put file and fetch
file. Unfortunately, that change broke the smart transport because it
started raising exceptions instead of returning from _run(). This
breakage is documented in #23711.
An attempt to fix it was made at #23717 but the first attempt was
objected to as needing to touch too much code. The second attmept was
objected to as smart was forced to encapsulate retries (thus retrying
a sftp "rety" times before trying scp "retry" times and then finally
moving onto piped). This third attempt has retries encapsulate smart.
So each sub-transport is tried once and if all three fail, another retry
attempt is made which tries each of the three again.
Fixes#23711Fixes#23717
* Add state intent argument in vyos interface
* State intent argument support
* Integration test for supported intent arguments
* Add intent testcase
* FIx ci issue
* junos_interface intent arguments
* Add check for intent argument in junos_interface
* Integration test for intent arguments
* Minor type fixes
* Add delay only if config diff is present
* add enabled configuration argument
* net_interface test case changes
* Minor doc change
Tested with:
from datetime import datetime, timedelta
from dateutil.relativedelta import relativedelta
n = datetime.now()
assert n + timedelta(days=365) == n + relativedelta(years=1)