Add nxos_config IT (#28853)

* recalibrate tests and add new ones

* add new cli tests

* add new nxapi tests

* Add new tests for cli and nxapi

test/integration/targets/nxos_config/tests/common/backup.yaml

@@ -1,13 +1,16 @@
 ---
 - debug: msg="START {{ connection.transport }}/backup.yaml"
 
+# Select interface for test
+- set_fact: intname="{{ nxos_int1 }}"
+
 - name: setup
   nxos_config:
     commands:
       - no description
       - no shutdown
     parents:
-      - interface Ethernet2/5
+      - "interface {{ intname }}"
     match: none
     provider: "{{ connection }}"
 
@@ -26,7 +29,11 @@
 
 - name: configure device with config
   nxos_config:
-    src: basic/config.j2
+    commands:
+      - description this is a test
+      - shutdown
+    parents:
+      - "interface {{ intname }}"
     backup: yes
     provider: "{{ connection }}"
   register: result

test/integration/targets/nxos_config/tests/common/defaults.yaml

@@ -1,19 +1,26 @@
 ---
 - debug: msg="START {{ connection.transport }}/defaults.yaml"
 
+# Select interface for test
+- set_fact: intname="{{ nxos_int1 }}"
+
 - name: setup
   nxos_config:
     commands:
       - no description
       - shutdown
     parents:
-      - interface Ethernet2/5
+      - "interface {{ intname }}"
     match: none
     provider: "{{ connection }}"
 
 - name: configure device with defaults included
   nxos_config:
-    src: defaults/config.j2
+    commands:
+      - description this is a test
+      - no shutdown
+    parents:
+      - "interface {{ intname }}"
     defaults: yes
     provider: "{{ connection }}"
   register: result
@@ -27,7 +34,11 @@
 
 - name: check device with defaults included
   nxos_config:
-    src: defaults/config.j2
+    commands:
+      - description this is a test
+      - no shutdown
+    parents:
+      - "interface {{ intname }}"
     defaults: yes
     provider: "{{ connection }}"
   register: result

test/integration/targets/nxos_config/tests/common/sanity.yaml

@@ -0,0 +1,41 @@
+---
+- debug: msg="START TRANSPORT:{{ connection.transport }} nxos_config sanity test"
+
+- name: setup
+  nxos_config:
+    lines: ip access-list test
+    provider: "{{ connection }}"
+    match: none
+
+- name: "TRANSPORT:CLI nxos_config sanity test"
+  nxos_config:
+    lines:
+      - 10 permit ip 1.1.1.1/32 any log
+      - 20 permit ip 2.2.2.2/32 any log
+      - 30 permit ip 3.3.3.3/32 any log
+      - 40 permit ip 4.4.4.4/32 any log
+      - 50 permit ip 5.5.5.5/32 any log
+    parents: ip access-list test
+    before: no ip access-list test
+    match: exact
+    provider: "{{ connection }}"
+
+- name: "TRANSPORT:CLI nxos_config sanity test - replace block"
+  nxos_config:
+    lines:
+      - 10 permit ip 1.1.1.1/32 any log
+      - 20 permit ip 2.2.2.2/32 any log
+      - 30 permit ip 3.3.3.3/32 any log
+      - 40 permit ip 4.4.4.4/32 any log
+    parents: ip access-list test
+    before: no ip access-list test
+    replace: block
+    provider: "{{ connection }}"
+
+- name: teardown
+  nxos_config:
+    lines: no ip access-list test
+    provider: "{{ connection }}"
+    match: none
+
+- debug: msg="END TRANSPORT:{{ connection.transport }} nxos_config sanity test"

test/integration/targets/nxos_config/tests/common/save.yaml

@@ -1,20 +1,23 @@
 ---
 - debug: msg="START {{ connection.transport }}/save.yaml"
 
+# Select interface for test
+- set_fact: intname="{{ nxos_int1 }}"
+
 - name: setup
   nxos_config:
     commands:
       - no description
       - no shutdown
     parents:
-      - interface Ethernet2/5
+      - "interface {{ intname }}"
     match: none
     provider: "{{ connection }}"
 
-
 - name: save config
   nxos_config:
-    save: true
+    save_when: always
+    timeout: 300
     provider: "{{ connection }}"
   register: result
 
@@ -24,7 +27,8 @@
 
 - name: save should always run
   nxos_config:
-    save: true
+    save_when: always
+    timeout: 300
     provider: "{{ connection }}"
   register: result
 

test/integration/targets/nxos_config/tests/common/src_basic.yaml

@@ -1,19 +1,26 @@
 ---
 - debug: msg="START {{ connection.transport }}/src_basic.yaml"
 
+# Select interface for test
+- set_fact: intname="{{ nxos_int1 }}"
+
 - name: setup
   nxos_config:
     commands:
       - no description
       - no shutdown
     parents:
-      - interface Ethernet2/5
+      - "interface {{ intname }}"
     match: none
     provider: "{{ connection }}"
 
 - name: configure device with config
   nxos_config:
-    src: basic/config.j2
+    commands:
+      - description this is a test
+      - shutdown
+    parents:
+      - "interface {{ intname }}"
     defaults: yes
     provider: "{{ connection }}"
   register: result
@@ -26,7 +33,11 @@
 
 - name: check device with config
   nxos_config:
-    src: basic/config.j2
+    commands:
+      - description this is a test
+      - shutdown
+    parents:
+      - "interface {{ intname }}"
     defaults: yes
     provider: "{{ connection }}"
   register: result

test/integration/targets/nxos_config/tests/common/src_match_none.yaml

@@ -1,5 +1,8 @@
 ---
-- debug: msg="START cli/src_match_none.yaml"
+- debug: msg="START {{ connection.transport }}/src_match_none.yaml"
+
+# Select interface for test
+- set_fact: intname="{{ nxos_int1 }}"
 
 - name: setup
   nxos_config:
@@ -7,14 +10,18 @@
       - no description
       - no shutdown
     parents:
-      - interface Ethernet2/5
+      - "interface {{ intname }}"
     match: none
-    provider: "{{ cli }}"
+    provider: "{{ connection }}"
 
 - name: configure device with config
   nxos_config:
-    src: basic/config.j2
-    provider: "{{ cli }}"
+    commands:
+      - description this is a test
+      - shutdown
+    parents:
+      - "interface {{ intname }}"
+    provider: "{{ connection }}"
     match: none
     defaults: yes
   register: result
@@ -27,8 +34,12 @@
 
 - name: check device with config
   nxos_config:
-    src: basic/config.j2
-    provider: "{{ cli }}"
+    commands:
+      - description this is a test
+      - shutdown
+    parents:
+      - "interface {{ intname }}"
+    provider: "{{ connection }}"
     defaults: yes
   register: result
 
@@ -39,4 +50,4 @@
       - "result.changed == false"
       - "result.updates is not defined"
 
-- debug: msg="END cli/src_match_none.yaml"
+- debug: msg="END {{ connection.transport }}/src_match_none.yaml"

test/integration/targets/nxos_config/tests/common/sublevel_block.yaml

@@ -1,5 +1,5 @@
 ---
-- debug: msg='START cli/sublevel_block.yaml'
+- debug: msg='START {{ connection.transport }}/sublevel_block.yaml'
 
 - name: setup
   nxos_config:
@@ -8,10 +8,10 @@
       - 20 permit ip 2.2.2.2/32 any log
       - 30 permit ip 3.3.3.3/32 any log
     parents: ip access-list test
-    provider: "{{ cli }}"
+    provider: "{{ connection }}"
     match: none
 
-- name: configure sub level command using block resplace
+- name: configure sub level command using block replace
   nxos_config:
     lines:
       - 10 permit ip 1.1.1.1/32 any log
@@ -20,7 +20,7 @@
       - 40 permit ip 4.4.4.4/32 any log
     parents: ip access-list test
     replace: block
-    provider: "{{ cli }}"
+    provider: "{{ connection }}"
   register: result
 
 - assert:
@@ -41,7 +41,7 @@
       - 40 permit ip 4.4.4.4/32 any log
     parents: ip access-list test
     replace: block
-    provider: "{{ cli }}"
+    provider: "{{ connection }}"
   register: result
 
 - assert:
@@ -51,7 +51,7 @@
 - name: teardown
   nxos_config:
     lines: no ip access-list test
-    provider: "{{ cli }}"
+    provider: "{{ connection }}"
     match: none
 
-- debug: msg='END cli/sublevel_block.yaml'
+- debug: msg='END {{ connection.transport }}/sublevel_block.yaml'

test/integration/targets/nxos_config/tests/nxapi/backup.yaml

@@ -1,50 +0,0 @@
----
-- debug: msg="START nxapi/backup.yaml"
-
-- name: setup
-  nxos_config:
-    commands:
-      - no description
-      - no shutdown
-    parents:
-      - interface Ethernet2/5
-    match: none
-    provider: "{{ nxapi }}"
-
-- name: collect any backup files
-  find:
-    paths: "{{ role_path }}/backup"
-    pattern: "{{ inventory_hostname_short }}_config*"
-  register: backup_files
-  delegate_to: localhost
-
-- name: delete backup files
-  file:
-    path: "{{ item.path }}"
-    state: absent
-  with_items: "{{backup_files.files|default([])}}"
-
-- name: configure device with config
-  nxos_config:
-    src: basic/config.j2
-    backup: yes
-    provider: "{{ nxapi }}"
-  register: result
-
-- assert:
-    that:
-      - "result.changed == true"
-      - "result.updates is defined"
-
-- name: collect any backup files
-  find:
-    paths: "{{ role_path }}/backup"
-    pattern: "{{ inventory_hostname_short }}_config*"
-  register: backup_files
-  delegate_to: localhost
-
-- assert:
-    that:
-      - "backup_files.files is defined"
-
-- debug: msg="END nxapi/backup.yaml"

test/integration/targets/nxos_config/tests/nxapi/src_match_none.yaml

@@ -1,40 +0,0 @@
----
-- debug: msg="START nxapi/src_match_none.yaml"
-
-- name: setup
-  nxos_config:
-    commands:
-      - no description
-      - no shutdown
-    parents:
-      - interface Ethernet2/5
-    match: none
-    provider: "{{ nxapi }}"
-
-- name: configure device with config
-  nxos_config:
-    src: basic/config.j2
-    provider: "{{ nxapi }}"
-    match: none
-  register: result
-
-- assert:
-    that:
-      - "result.changed == true"
-# https://github.com/ansible/ansible-modules-core/issues/4807
-      - "result.updates is defined"
-
-- name: check device with config
-  nxos_config:
-    src: basic/config.j2
-    provider: "{{ nxapi }}"
-  register: result
-
-- assert:
-    that:
-      # Idempotent test
-# https://github.com/ansible/ansible-modules-core/issues/4807
-      - "result.changed == false"
-      - "result.updates is not defined"
-
-- debug: msg="END nxapi/src_match_none.yaml"

test/integration/targets/nxos_config/tests/nxapi/sublevel_block.yaml

@@ -1,59 +0,0 @@
----
-- debug: msg="START nxapi/sublevel_block.yaml"
-
-- name: setup
-  nxos_config:
-    lines:
-      - 10 permit ip 1.1.1.1/32 any log
-      - 20 permit ip 2.2.2.2/32 any log
-      - 30 permit ip 3.3.3.3/32 any log
-    parents: ip access-list test
-    before: no ip access-list test
-    provider: "{{ nxapi }}"
-    match: none
-  ignore_errors: yes
-
-- name: configure sub level command using block resplace
-  nxos_config:
-    lines:
-      - 10 permit ip 1.1.1.1/32 any log
-      - 20 permit ip 2.2.2.2/32 any log
-      - 30 permit ip 3.3.3.3/32 any log
-      - 40 permit ip 4.4.4.4/32 any log
-    parents: ip access-list test
-    replace: block
-    provider: "{{ nxapi }}"
-  register: result
-
-- assert:
-    that:
-      - "result.changed == true"
-      - "'ip access-list test' in result.updates"
-      - "'10 permit ip 1.1.1.1/32 any log' in result.updates"
-      - "'20 permit ip 2.2.2.2/32 any log' in result.updates"
-      - "'30 permit ip 3.3.3.3/32 any log' in result.updates"
-      - "'40 permit ip 4.4.4.4/32 any log' in result.updates"
-
-- name: check sub level command using block replace
-  nxos_config:
-    lines:
-      - 10 permit ip 1.1.1.1/32 any log
-      - 20 permit ip 2.2.2.2/32 any log
-      - 30 permit ip 3.3.3.3/32 any log
-      - 40 permit ip 4.4.4.4/32 any log
-    parents: ip access-list test
-    replace: block
-    provider: "{{ nxapi }}"
-  register: result
-
-- assert:
-    that:
-      - "result.changed == false"
-
-- name: teardown
-  nxos_config:
-    lines: no ip access-list test
-    provider: "{{ nxapi }}"
-    match: none
-
-- debug: msg="END nxapi/sublevel_block.yaml"