The earlier-recommended "pat1:pat2:pat3[x:y]" notation doesn't work well
with IPv6 addresses, so we recommend ',' as a separator instead. We know
that commas can't occur within a pattern, so we can just split on it.
We still have to accept the "foo:bar" notation because it's so commonly
used, but we issue a deprecation warning for it.
Fixes#12296Closes#12404Closes#12329
* Add exception handling when running PowerShell modules to provide exception message and stack trace.
* Enable strict mode for all PowerShell modules and internal commands.
* Update common PowerShell code to fix strict mode errors.
* Fix an issue with Set-Attr where it would not replace an existing property if already set.
* Add tests for exception handling using modified win_ping modules.
Hi @amenonsen - thanks for fixing up the hunting down the unicode bug and expanding test_addresses. The code looks good, merging!-- Be systematic about parsing and validating hostnames and addresses
These used to go in vars_cache, so merging them in after that as they
are "live" variables and the user would most likely want to see these
above anything else.
Labels must start with an alphanumeric character, may contain
alphanumeric characters or hyphens, but must not end with a hyphen.
We enforce those rules, but allow underscores wherever hyphens are
accepted, and allow alphanumeric ranges anywhere.
We relax the definition of "alphanumeric" to include Unicode characters
even though such inventory hostnames cannot be used in practice unless
an ansible_ssh_host is set for each of them.
We still don't enforce length restrictions—the fact that we have to
accept ranges makes it more complex, and it doesn't seem especially
worthwhile.
This adds a parse_address(pattern) utility function that returns
(host,port), and uses it wherever where we accept IPv4 and IPv6
addresses and hostnames (or host patterns): the inventory parser
the the add_host action plugin.
It also introduces a more extensive set of unit tests that supersedes
the old add_host unit tests (which didn't actually test add_host, but
only the parsing function).
There was code to support set literals (on Python 2.7 and newer), but it
was buggy: SAFE_NODES.union() doesn't modify SAFE_NODES in place,
instead it returns a new set object that is then silently discarded.
I added a unit test and fixed the code. I also changed the version
check to use sys.version_tuple instead of a string comparison, for
consistency with the subsequent Python 3.4 version check that I added in
the previous commit.
Two things changed in Python 3.4:
- 'basestring' is no longer defined, so use six.string_types
- True/False are now special AST node types (NamedConstant) rather than
just names
(Good thing we had tests, or I wouldn't have noticed the 2nd thing!)
I found only one place where safe_eval() is called inside the ansible
codebase: in lib/template/__init__.py. The call to safe_eval(result,
...) is protected by result.startswith('...'), which means result cannot
possibly be a byte string on Python 3 (or startswith() would raise, so
six.string_types (which excludes byte strings on Python 3) is fine here.
PyYAML has a SafeRepresenter in lib/... that defines
def represent_unicode(self, data):
return self.represent_scalar(u'tag:yaml.org,2002:str', data)
and a different SafeRepresenter in lib3/... that defines
def represent_str(self, data):
return self.represent_scalar('tag:yaml.org,2002:str', data)
so the right thing to do on Python 3 is to use represent_str.
(AnsibleUnicode is a subclass of six.text_type, i.e. 'str' on Python 3.)
needed for winrm, disabled closing connections in ssh to avoid issues with that persistance, need to normalize all this in future
This reverts commit 23a22397bf.
Required some rewiring in inventory code to make sure we're using
the DataLoader class for some data file operations, which makes mocking
them much easier.
Also identified two corner cases not currently handled by the code, related
to inventory variable sources and which one "wins". Also noticed we weren't
properly merging variables from multiple group/host_var file locations
(inventory directory vs. playbook directory locations) so fixed as well.
This was commented out earlier because of the lack of interprocess
locking and prepare_writeable_dir in v2.
The locking was not needed: it could only protect against other siblings
of this process (since they were all locking a temporary file that was
opened in the parent), and those would be running as the same user and
with the same umask. Also, os.makedirs() tolerates intermediate paths
being created by other processes. For any other kind of error, both
locking and non-locking code paths would fail in the same way.
So all we really need to do is make sure we have write permissions.
(We also move the cp_dir handling code to where we actually set the
ControlPath ourselves; if the user has set it via ssh_*args already,
we don't need to bother.)
commit 9921bb9d2002e136c030ff337c14f8b7eab0fc72
Author: Abhijit Menon-Sen <ams@2ndQuadrant.com>
Date: Mon Aug 10 20:19:44 2015 +0530
Document --ssh-extra-args command-line option
commit 8b25595e7b1cc3658803d0821fbf498c18ee608a
Author: Abhijit Menon-Sen <ams@2ndQuadrant.com>
Date: Thu Aug 13 13:24:57 2015 +0530
Don't disable GSSAPI/Pubkey authentication when using --ask-pass
This commit is based on a bug report and PR by kolbyjack (#6846) which
was subsequently closed and rebased as #11690. The original problem was:
«The password on the delegated host is different from the one I
provided on the command line, so it had to use the pubkey, and the
main host doesn't have a pubkey on it yet, so it had to use the
password.»
(This commit is revised and included here because #11690 would conflict
with the changes in #11908 otherwise.)
Closes#11690
commit 119d0323892c65e8169ae57e42bbe8e3517551a3
Author: Abhijit Menon-Sen <ams@2ndQuadrant.com>
Date: Thu Aug 13 11:16:42 2015 +0530
Be more explicit about why SSH arguments are added
This adds vvvvv log messages that spell out in detail where each SSH
command-line argument is obtained from.
Unfortunately, we can't be sure if, say, self._play_context.remote_user
is obtained from ANSIBLE_REMOTE_USER in the environment, remote_user in
ansible.cfg, -u on the command line, or an ansible_ssh_user setting in
the inventory or on a task or play. In some cases, e.g. timeout, we
can't even be sure if it was set by the user or just a default.
Nevertheless, on the theory that at five v's you can use all the hints
available, I've mentioned the possible sources in the log messages.
Note that this caveat applies only to the arguments that ssh.py adds by
itself. In the case of ssh_args and ssh_extra_args, we know where they
are from, and say so, though we can't say WHERE in the inventory they
may be set (e.g. in host_vars or group_vars etc.).
commit b605c285baf505f75f0b7d73cb76b00d4723d02e
Author: Abhijit Menon-Sen <ams@2ndQuadrant.com>
Date: Tue Aug 11 15:19:43 2015 +0530
Add a FAQ entry about ansible_ssh_extra_args
commit 49f8edd035cd28dd1cf8945f44ec3d55212910bd
Author: Abhijit Menon-Sen <ams@2ndQuadrant.com>
Date: Mon Aug 10 20:48:50 2015 +0530
Allow ansible_ssh_args to be set as an inventory variable
Before this change, ssh_args could be set only in the [ssh_connection]
section of ansible.cfg, and was applied to all hosts. Now it's possible
to set ansible_ssh_args as an inventory variable (directly, or through
group_vars or host_vars) to selectively override the global setting.
Note that the default ControlPath settings are applied only if ssh_args
is not set, and this is true of ansible_ssh_args as well. So if you want
to override ssh_args but continue to set ControlPath, you'll need to
repeat the appropriate options when setting ansible_ssh_args.
(If you only need to add options to the default ssh_args, you may be
able to use the ansible_ssh_extra_args inventory variable instead.)
commit 37c1a5b6794cee29a7809ad056a86365a2c0f886
Author: Abhijit Menon-Sen <ams@2ndQuadrant.com>
Date: Mon Aug 10 19:42:30 2015 +0530
Allow overriding ansible_ssh_extra_args on the command-line
This patch makes it possible to do:
ansible somehost -m setup \
--ssh-extra-args '-o ProxyCommand="ssh -W %h:%p -q user@bouncer.example.com"'
This overrides the inventory setting, if any, of ansible_ssh_extra_args.
Based on a patch originally by @Richard2ndQuadrant.
commit b023ace8a8a7ce6800e29129a27ebe8bf6bd38e0
Author: Abhijit Menon-Sen <ams@2ndQuadrant.com>
Date: Mon Aug 10 19:06:19 2015 +0530
Add an ansible_ssh_extra_args inventory variable
This can be used to configure a per-host or per-group ProxyCommand to
connect to hosts through a jumphost, e.g.:
inventory:
[gatewayed]
foo ansible_ssh_host=192.0.2.1
group_vars/gatewayed.yml:
ansible_ssh_extra_args: '-o ProxyCommand="ssh -W %h:%p -q bounceuser@gateway.example.com"'
Note that this variable is used in addition to any ssh_args configured
in the [ssh_connection] section of ansible.cfg (so you don't need to
repeat the ControlPath settings in ansible_ssh_extra_args).
* When iterating over a child state, a failure should be propagated
up so parent blocks don't continue iterating
* Make sure a child state exists before trying to search it
Fixes#12210
I don't think six.iteritems is available here, but I also don't expect
there to be enough platforms to ever make the speed difference between
.items() and .iteritems() noticeable.
Replace .iteritems() with six.iteritems() everywhere except in
module_utils (because there's no 'six' on the remote host). And except
in lib/ansible/galaxy/data/metadata_template.j2, because I'm not sure
six is available there.
The lock file is (a temporary file) opened in the parent process, whose
open fd is inherited by the workers after fork, and passed down through
the PlayContext. Connection grows lock/unlock methods which can be used
by individual connection plugins.
Right now, we don't do any locking, but we still scan known_hosts files
twice per connection. That's completely unnecessary, and the proposed
solutions to the locking problem wouldn't need known_hosts scanning
anyway, so this code can go away.
In v1, a trailing newline was kept if the parameter was passed as key=value. If
the parameter was passed as yaml dict the trailing newline was
discarded. Since key-value and yaml dict were unified in v2 we have to
make a choice as to which behaviour we want. Decided that keeping trailing
newlines by default made the most sense.
Fixes#12200Fixes#12199
dbd755e0 previously assigned the value to self._templar.environment.searchpath,
which is incorrect - it needs to be assigned to the environment.loader.searchpath
value instead.
Fixes#11931
This information was earlier shown only with ANSIBLE_DEBUG, but it's
extremely useful in a user context, especially with module invocations
with deeply nested args like the ec2_vpc/ec2 modules.
Closes#11680
The contributor's name on line 10 (originally line 7) includes a character
that the default Python encoding (ASCII) raises an error on when interpreting
the file.
Specifying the utf-8 encoding, as is done in other modules, resolves
the error.
The error being raised is
SyntaxError: Non-ASCII character '\xc3' in file /.../lib/ansible/module_utils/f5.py
on line 7, but no encoding declared; see http://www.python.org/peps/pep-0263.html
for details
Rewrite function `get_fqdn`. It returns fqdn for all kinds of urls now.
`add_git_host_key` determines whether a url is ssh and whether its host
key should be added.
FieldAttributes will now by default not be post_validated unless a flag
is set on them in the class, as a large number of fields are really there
simply to be inherited by Task/PlayContext and shouldn't be templated too
early.
The other (unrelated to the base issue) in #12084 is also fixed here, where
the roles field is loaded before vars/vars_files, meaning there are no vars
yet loaded in the play when the templating occurs.
Fixes#12084
You cannot call bytes(obj) to get a simple representation of obj on
Python 3! E.g. bytes(42) returns a byte string with 42 NUL characters
instead of b'42'.
Python has had automatic int-to-long promotion for a long long time now.
Even Python 2.4 does that automatically.
Python 3 drops support for the L suffix altogether.
This is based on some code from (closed) PR #7872, but reworked based on
suggestions by @abadger and the other core team members.
Closes#7872 by @darkk (hash_merge/hash_replace filters)
Closes#11153 by @telbizov (merged_dicts lookup plugin)
Now we issue a "Reading … from stdin" prompt if our input isatty(), as
gpg does. We also suppress the "x successful" confirmation message at
the end if we're part of a pipeline.
(The latter requires that we not close sys.stdout in VaultEditor, and
for symmetry we do the same for sys.stdin, though it doesn't matter in
that case.)
This allows the following invocations:
# Interactive use, like gpg
ansible-vault encrypt --output x
# Non-interactive, for scripting
echo plaintext|ansible-vault encrypt --output x
# Separate input and output files
ansible-vault encrypt input.yml --output output.yml
# Existing usage (in-place encryption) unchanged
ansible-vault encrypt inout.yml
…and the analogous cases for ansible-vault decrypt as well.
In all cases, the input and output files can be '-' to read from stdin
or write to stdout. This permits sensitive data to be encrypted and
decrypted without ever hitting disk.
Now that VaultLib always decides to use AES256 to encrypt, we don't need
this broken code any more. We need to be able to decrypt this format for
a while longer, but encryption support can be safely dropped.
Now we don't have to recreate VaultEditor objects for each file, and so
on. It also paves the way towards specifying separate input and output
files later.
It's unused and unnecessary; VaultLib can decide for itself what cipher
to use when encrypting. There's no need (and no provision) for the user
to override the cipher via options, so there's no need for code to see
if that has been done either.
This commit deprecates the earlier groupname[x-y] syntax in favour of
the inclusive groupname[x:y] syntax. It also makes the subscripting
code simpler and adds explanatory comments.
One problem addressed by the cleanup is that _enumeration_info used to
be called twice, and its results discarded the first time because of the
convoluted control flow.
The possibilities are complicated enough that I didn't want to make
changes without having a complete description of what it actually
accepts/matches. Note that this text documents current behaviour, not
necessarily the behaviour we want. Some of this is undocumented and may
not be intended.
The --new-vault-password-file option works the same as
--vault-password-file but applies only to rekeying (when
--vault-password-file sets the old password). Also update the manpage
to document these options more fully.
`if method in dir(self):` is very inefficient:
- it must construct a list object listing all the object attributes & methods
- it must then perform a O(N) linear scan of that list
Replace it with the idiomatic `if hasattr(self, method):`, which is a
O(1) expected time hash lookup.
Should fix#11981.
Apart from ansible-vault create, every vault subcommand is happy to deal
with multiple filenames, so we can check that there's at least one, and
make create check separately that there aren't any extra.
* Add exception handling when running PowerShell modules to provide exception message and stack trace.
* Enable strict mode for all PowerShell modules and internal commands.
* Update common PowerShell code to fix strict mode errors.
* Fix an issue with Set-Attr where it would not replace an existing property if already set.
* Add tests for exception handling using modified win_ping modules.
* Fixes hostvar serialization issue (#12005)
* Fixes regression in include_vars from within a role (#9498), where
we had the precedence order for vars_cache (include_vars, set_fact)
incorrectly before role vars.
* Fixes another bug in which vars loaded from files in the format of
a list instead of dictionary would cause a failure.
Fixes#9498Fixes#12005
Now we accept IPv6 addresses _with port numbers_ only in the standard
[xxx]:NN notation (though bare IPv6 addresses may be given, as before,
and non-IPv6 addresses may also be placed in square brackets), and any
other host identifiers (IPv4/hostname/host pattern) as before, with an
optional :NN suffix.
The new code parses INI-format inventory files in a single pass using a
well-documented state machine that reports precise errors and eliminates
the duplications and inconsistencies and outright errors in the earlier
three-phase parsing code (e.g. three ways to skip comments). It is also
much easier now to follow what decisions are being taken on the basis of
the parsed data. The comments point out various potential improvements,
particularly in the area of consistent IPv6 handling.
On the ornate marble tombstone of the old code, the following
inscription is one last baffling memento from a bygone age:
- def _before_comment(self, msg):
- ''' what's the part of a string before a comment? '''
- msg = msg.replace("\#","**NOT_A_COMMENT**")
- msg = msg.split("#")[0]
- msg = msg.replace("**NOT_A_COMMENT**","#")
- return msg
This change is similar to https://github.com/ansible/ansible/pull/10465
It extends the logic there to also support none types. Right now if you have
a '!!null' in yaml, and that var gets passed around, it will get converted to
a string.
eg. defaults/main.yml
```
ENABLE_AWESOME_FEATURE: !!null # Yaml Null
OTHER_CONFIG:
secret1: "so_secret"
secret2: "even_more_secret"
CONFIG:
hostname: "some_hostname"
features:
awesame_feature: "{{ ENABLE_AWESOME_FEATURE}}"
secrets: "{{ OTHER_CONFIG }}"
```
If you output `CONFIG` to json or yaml, the feature flag would get represented in the output
as a string instead of as a null, but secrets would get represented as a dictionary. This is
a mis-match in behaviour where some "types" are retained and others are not. This change
should fix the issue.
I also updated the template test to test for this and made the changes to v2.
Added a changelog entry specifically for the change from empty string to null as the default.
Made the null representation configurable.
It still defaults to the python NoneType but can be overriden to be an emptystring by updating
the DEFAULT_NULL_REPRESENTATION config.
first off, we add an oddly slow basic test of 10k item inventory
Before:
```
Ran 229 tests in 13.214s
OK
real 0m13.403s
user 0m12.106s
sys 0m1.155s
```
After:
```
Ran 230 tests in 21.328s
OK
real 0m21.516s
user 0m20.099s
sys 0m1.275s
```
since that seems like a bit long for the test to add to runtime, lets profile
`python -m cProfile -s time ./bin/ansible all -i test/units/inventory_test_data/huge_range --list-hosts`
Before:
```
1272607 function calls (1259689 primitive calls) in 8.497 seconds
Ordered by: internal time
ncalls tottime percall cumtime percall filename:lineno(function)
10000 4.393 0.000 4.396 0.000 __init__.py:395(_get_host)
20000 2.695 0.000 2.697 0.000 __init__.py:341(__append_host_to_results)
40369 0.113 0.000 0.113 0.000 {posix.lstat}
50006 0.102 0.000 0.153 0.000 __init__.py:1490(combine_vars)
40008 0.089 0.000 0.202 0.000 __init__.py:1546(_load_vars_from_path)
20195 0.088 0.000 0.088 0.000 {posix.stat}
10011 0.087 0.000 0.087 0.000 {posix.getcwd}
```
The top two lines are promising optimization targets
- populate Inventory's host cache more in _get_host, as we are looping
over all the groups anyways.
- eliminate duplicate check of whether we've already included a host
in the construction around __append_host_to_results we can infer
presence of a host in the results list implies the presence of its
name in the hostnames set, allowing us to only to the less expensive
of the two checks
After:
```
1252610 function calls (1239692 primitive calls) in 1.320 seconds
Ordered by: internal time
ncalls tottime percall cumtime percall filename:lineno(function)
40369 0.105 0.000 0.105 0.000 {posix.lstat}
50006 0.094 0.000 0.141 0.000 __init__.py:1490(combine_vars)
40008 0.081 0.000 0.184 0.000 __init__.py:1546(_load_vars_from_path)
10011 0.080 0.000 0.080 0.000 {posix.getcwd}
20195 0.074 0.000 0.074 0.000 {posix.stat}
10002 0.069 0.000 0.261 0.000 __init__.py:1517(load_vars)
```
* Speed up serialization of hostvars by simply using the internal
dictionary used for cached lookups
* Use blocking gets/puts on queues instead of spin locking
* Merge sequential implicitly created blocks
* now it uses -n to get immediate error if no password is supplied and one is needed,
this should fix the issue with sudo hanging waiting for input.
* made -k configurable, this can break changing become_users in play if left out,
but opens up the possiblity of OTP support.
This function takes a string like 'foo:bar[1:2]:baz[x:y]-quux' and
returns a list of patterns ['foo', 'bar[1:2]', 'baz[x:y]-quux'], i.e.
splits the string on colons that are not part of a range specification.
get_hosts → used externally, not changed
_get_hosts → _evaluate_patterns (takes a list, evaluates ! and &)
__get_hosts → _match_one_pattern (takes one pattern only, ignores !&)
This function takes a string like 'foo:bar[1:2]:baz[x:y]-quux' and
returns a list of patterns ['foo', 'bar[1:2]', 'baz[x:y]-quux'], i.e.
splits the string on colons that are not part of a range specification.
This was used earlier to implement serial, but that's now done using
restrict_to_hosts() (whose docstring is also suitably adjusted here)
and there are no more callers.
* A commen dict of keys has been defined, which we look in results returned from the API.
* self.returns dict can be use in subclass to extend this dict.
* Optionally the key name can be replaced with a new key name, often used to make the return keys identical to the arguments passed.
* Use new style class
Since we explicitly set convert_bare=False in the template lookup
code, but still want individual looks that call listify directly to
convert bare variables if needed.
This is a slightly different fix than we originally committed, but fixes
the problem in a less invasive way (and I believe it's generally better
that we don't deal with relative paths internally past this point)
Fixes#11789
* Better comments
* Reorganize code so related settings are close to each other
* Add ::1 to the "localhost" patterns we look for
* Make the dest_port parameter override the ansible_ssh_port setting
* Fix dest_port (wasn't being set)
* more complete detection of delegate_to
* Fix set_remote_user (wasn't being looked for in parameters)
* Instead of removing mode here, have the ansible module accept it
(better documents the parameters doing it htat way)
Fixes bugs related to creating Templar() objects on the fly, where
the shared loader objects (serialized to TaskExecutor) aren't used
so information loaded into plugin loaders after forking is lost.
Fixes#11815
We can unconditionally wrap remote_addr in square brackets for scp and
sftp (both of which require them for IPv6 addresses), but not wrap them
at all for ssh (which doesn't accept them). This way, we don't have to
detect and treat IPv6 addresses specially. This works for hostnames,
IPv4 addresses, and IPv6 addresses.
The earlier code seemed to intend to wrap all IPv6 addresses in square
brackets, which would have broken ssh, but it actually made no attempt
to detect IPv6 addresses at all (so it broke only with IPv6 addresses
for scp and sftp).
Based on a review of PR #11677 by @JuiceBoxSingularity
In stable-1.9, the prompt string is passed to raw_input(), which prints
it without an extra \n. Here we're just print()ing it, so the \n would
be doubled.
Without at least one worker process, things break:
Traceback (most recent call last):
File "/home/ams/extern/ansible/ansible/lib/ansible/executor/process/result.py", line 103, in run
result = self._read_worker_result()
File "/home/ams/extern/ansible/ansible/lib/ansible/executor/process/result.py", line 69, in _read_worker_result
(worker_prc, main_q, rslt_q) = self._workers[self._cur_worker]
IndexError: list index out of range
- Add support for inserting module args into PowerShell modules. Fixes#11661.
- Support Windows paths containing spaces. Applies changes from #10727 to v2. Fixes#9999. Should also fixansible/ansible-modules-core#944 and ansible/ansible-modules-core#1007.
- Change how execution policy is set for running remote scripts. Applies changes from #11092 to v2. Also fixesansible/ansible-modules-core#1776.
- Use codepage 65001 (UTF-8) for WinRM connection instead of default (CP437), convert command to UTF-8 and results from UTF-8. Replaces changes from #10024. Fixes#11198.
- Close WinRM connection when task completes.
- Use win_stat, win_file and win_copy modules instead of stat, file and copy when called from within other action plugins (only when using WinRM+PowerShell).
- Unquote Windows path arguments before passing to win_stat, win_file, win_copy and slurp modules (only when using WinRM/PowerShell).
- Check for win_ping module to determine if core modules are missing (only when using WinRM/PowerShell).
- Add stdout_lines to result from running low level commands (so stdout_lines is available when using raw/script).
- Update copy action plugin to use shell functions for joining paths and checking for trailing slash.
- Update fetch action plugin to unquote source path when using Windows paths.
- Add win_copy and win_template action plugins that inherit from copy and template.
- Support running .bat and .cmd scripts using default system encoding instead of UTF-8.
- Always send PowerShell commands as base64-encoded blobs to allow for running simple PowerShell commands via raw.
- Support running modules on Windows with interpreters other than PowerShell.
- Update integration tests to support above changes and test unicode fixes.
- Add test for win_user error from ansible/ansible-modules-core#1241 (fixed by ansible/ansible-modules-core#1774).
- Add test for additional win_stat output values (implemented by ansible/ansible-modules-core#1473).
- Add test for OS architecture and name from setup.ps1 (implemented by ansible/ansible-modules-core#1100).
All WinRM integration tests pass for me with these changes.
When stretching the key for vault files, use PBKDF2HMAC() from the
cryptography package instead of pycrypto. This will speed up the opening
of vault files by ~10x.
The problem is here in lib/ansible/utils/vault.py:
hash_function = SHA256
# make two keys and one iv
pbkdf2_prf = lambda p, s: HMAC.new(p, s, hash_function).digest()
derivedkey = PBKDF2(password, salt, dkLen=(2 * keylength) + ivlength,
count=10000, prf=pbkdf2_prf)
`PBKDF2()` calls a Python callback function (`pbkdf2_pr()`) 10000 times.
If one has several vault files, this will cause excessive start times
with `ansible` or `ansible-playbook` (we experience ~15 second startup
times).
Testing the original implementation in 1.9.2 with a vault file:
In [2]: %timeit v.decrypt(encrypted_data)
1 loops, best of 3: 265 ms per loop
Having a recent OpenSSL version and using the vault.py changes in this commit:
In [2]: %timeit v.decrypt(encrypted_data)
10 loops, best of 3: 23.2 ms per loop
Fixes an issue with a confusing error: "paramiko: The authenticity of host '[host]' can't be established" when ssh on the command line doesn't complain
Closes PR #7730
This is unsafe and we debated re-adding it to the v2/2.0 codebase,
however it is a common-enough feature that we will simply mark it
as deprecated for now and remove it at some point in the future.
Fixes#11718
* Don't reference __class__ when we can use the instance itself
* use isdisjoint() as it can stop once a match is found
* Remove a condtional that was taken care of in the conditonal just above
* enable batch mode (configurable with a config option, on by default)
for sftp transfers, so we can catch errors more easily
* general cleanup in the local connection plugin and fetch action plugin
Fixes#11612
* added pattern matching to match v1 functionality
* check the task name, not the task+role name for matches
* make sure the input is unicode
Fixes#11692
* Prompt had to be moved up, as it needed to be done before the first
templating of the play occurs, otherwise vars_files won't be templated
properly
* Fixed a bug related to an earlier fix of vars_files incorporating
extra vars to do the templating of the file name
Fixes#11404
Also making PlayContext a child class of the Playbook Base class,
which gives it access to all of the FieldAttribute code to ensure
field values are correctly typed after post_validation
Fixes#11381
