* Locate prtdiag even when absent from /usr/bin
On Solaris 8 hosts, this prevents fact collection from aborting with:
Argument 'args' to run_command must be list or string
* Lint fix.
* Style: pass /usr/platform/.../sbin as optional path to get_bin_path().
* Making username password etc non mandatory as we use persistence connection.
Some documentation fine tuning also done.
* To update version which was tested against.
* Adding Bacon switch (NE0152T) to device rules
* Qalthos Review catch
* Updating version
* Changing documentation to add Bacon switch. This is effective since 2.8
* Add url_username and url_password options for url lookup
* Update url.py
Fix documentation
* Fix options documentation
Default value for url_password and url_username is None not an empty string
* Add version added to documentation
* Break command over multiple lines to fix linting
* Fix more linting
* Update version_added in url.py to 2.8
Switches will accept the previously used syntax for /32 ACL entries, but they get changed to host ipaddress in the config file.
This results in the config check failing every time (permit ip 1.1.1.1/32 any log != permit ip host 1.1.1.1 any log), resulting in the ACL getting re-created on every single run of the Playbook.
Making this proposed change to the example will make it work in an idempotent manner.
+label: docsite_pr
This fix initializes current_version to None so that
module proceeds in check mode.
Fixes: #46654
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
If enable_snat is False, this should be used to build the
request, because the default value in the OpenStack Networking
API is True.
Fixes the issue #45915.
* ios_facts: Fix LLDP gathering without neighbors
When LLDP is enabled but no neighbors are present, the following
structure is generated:
...
"ansible_net_neighbors": {
"null": [
{
"host": null,
"port": null
}
]
},
...
If we are not able to find any relevant LLDP information, bail out early
so cases like shown above are handled more gracefully.
* ios_facts: Remove trailing space in lineprotocol
Some Cisco devices (at least CSR1000V 16.6.4) add a space after the
line protocol. This causes the space to be present in the result of
fact gathering:
"ansible_net_interfaces": {
"GigabitEthernet2": {
...
"lineprotocol": "up ",
Be more clear about scanning the output to avoid this behaviour.
* adding explanation of replace_all_instances
How does "replace_all_instances" work? does it increase the number of instances by 1 in the Load balancer and it scales in a server and waits for it to complete its health check, OR does it terminate a node a that causes an autoscale event to happen and then adds a new server?
+label: docsite_pr
* Enable communication to management API over HTTPS.
* Specify version added tags to new parameters
* Set proper parameter type.
* Corrected version_added numbers.
* Extracted commons to ansible utils.
* Fix PEP8 error
* Fix documentation extension syntax.
Fixes#22953
When python is compiled in debug mode, or certain command line flags are
passed, python issues helpful warnings to let users know of files opened
by not closed.
This can be fairly spammy on an ansible run. This change reduces the
number of such warnings by a factor of 10.
* Remove unnecessary workaround
* add test: set RABBITMQ_NODENAME environment variable
The following error occurs:
TASK [rabbitmq_user : Add user] ***
fatal: [testhost]: FAILED! => {
"changed": false,
"cmd": "/usr/sbin/rabbitmqctl -q list_users",
"rc": 69,
"msg": "Error:********@c65c2bc59398'. Please see diagnostics information and suggestions below.\n\nMost common reasons for this are:\n\n * Target node is unreachable (e.g. due to hostname resolution, TCP connection or firewall issues)\n * CLI tool fails to authenticate with the server (e.g. due to CLI tool's Erlang cookie not matching that of the server)\n * Target node is not running\n\nIn addition to the diagnostics info below:\n\n * See the CLI, clustering and networking guides on http://rabbitmq.com/documentation.html to learn more\n * Consult server logs on node test@c65c2bc59398\n\nDIAGNOSTICS\n===========\n\nattempted to contact:********@c65c2bc59398\n * effective user's home directory: /var/lib/rabbitmq\n * Erlang cookie hash: 3MxcYFrJzfhEL+FlUfLlQw==",
"stderr": [...],
"stderr_lines": [
"Error: unable to perform an operation on node 'test@c65c2bc59398'. Please see diagnostics information and suggestions below.", "",
"Most common reasons for this are:", "",
" * Target node is unreachable (e.g. due to hostname resolution, TCP connection or firewall issues)",
" * CLI tool fails to authenticate with the server (e.g. due to CLI tool's Erlang cookie not matching that of the server)",
" * Target node is not running", "",
"In addition to the diagnostics info below:", "",
" * See the CLI, clustering and networking guides on http://rabbitmq.com/documentation.html to learn more",
" * Consult server logs on node test@c65c2bc59398", "",
"DIAGNOSTICS", "===========", "",
"attempted to contact: [test@c65c2bc59398]", "",
"test@c65c2bc59398:",
" * connected to epmd (port 4369) on c65c2bc59398",
" * epmd reports: node 'test' not running at all",
" other nodes on c65c2bc59398: [rabbit]",
" * suggestion: start the node", "",
"Current node details:",
" * node name: rabbitmqcli2@c65c2bc59398",
" * effective user's home directory: /var/lib/rabbitmq",
" * Erlang cookie hash: 3MxcYFrJzfhEL+FlUfLlQw==", ""
],
"stdout": "",
"stdout_lines": []
}
* node parameter: fix default value
'rabbit' is the default value mentioned in the module documentation.
This fix checks if executable exists in local connection specified using
ANSIBLE_EXECUTABLE variable.
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* module_utils.urls: add fetch_file function
* apt: use fetch_file instead of own download()
* unarchive: use fetch_file instead of own codecopy
* apt: add test for deb=http://…
* unarchive: add test for a remote file download and unarchive
* yum: replace fetch_rpm_from_url by fetch_file
* use NamedTemporaryFile
* don't add a dot to fileext, it's already there
* allow update_cache as stand alone operation for yum/dnf
Fixes#40068
Signed-off-by: Adam Miller <admiller@redhat.com>
* make sanity tests happy
Signed-off-by: Adam Miller <admiller@redhat.com>
On connection errors the influxdb python module raises an exception with
an empty message leading to a fail_json with an empty error message:
265d14736b/influxdb/influxdb08/client.py (L252)
Fail with a more descriptive error in this case.
Currently, Ansible interprets variables with a True|False value as
boolean. This causes the vmware_deploy_ovf module to break, because
it can only accept string values as properties.
This fix checks if a value is boolean, and converts it to a string
if it is. Since integers do not seem to be causing the same error, this
is the only check we appear to need.
After completion, OVF properties that are boolean can be specified as
yes|no or true|false.
Closes: #45528
* Add chdir support to win_package
* Add chdir support to uninstall too.
* Update docs to account for uninstall.
* Correct variable substitution for hashtable.
* added changelog fragment
* Added module to manage manageiq tenants
* Fixed pep8 and module validation issues for manageiq_tenant
* Changes based on review
- Added parent attribute to specify the parent
- Cleanup return of tenant
- Update documentation on quotas
* Updated version added to 2.8
* Allow to specify images by hash for docker_container and docker_image_facts.
* flake8
* More sanity checks.
* Added changelog.
* Added test.
* Make compatible with Python < 3.4.
* Remove out-commented imports.
* Don't simply ignore container in present() if image is not specified.
* Use image from existing container for recreation if not specified.
* Added changelog.
* Improve comment.
* Ovirt_disk - Add ability to refresh passthrough disks
A new paramter "host" is added. When this paramter is specified the newly
created disk or an existing disk will refresh its information about the
underlying storage via the specified host. This oprion is only valid for
passthrough disks. This option requires at least the logical_unit.id to be
specified.
* Host search modification and some other minor changes.
* pep8 correction
* ovirt add snapshot delete after x days
* update logic of deleting snapshot and rename it
* update docs and names of vars
* update docs syntax
* Update ovirt_snapshot.py
* put remove logic to function
* use default removing function for snapshot
* win_reboot: Fix for ignore post_reboot_delay
This fixes an issue where win_reboot would be ignoring the provided
post_reboot_delay (and on Windows timing/waiting is everything!)
This must be backported to the v2.7 branch.
* Merge post-reboot handling into run()
* Adding a basic get lookup for rabbitmq.
* Always return a list
* If content type is JSON, make accessible via dict.
* Fixed incorrect json.loads variable and missing raise
* Change to document returned data
* Fixed pep8 issues
* Adding integration testing
* Moving lookup intgration tests to new target
* New rabbitmq lookup plugin (#44070).
* New rabbitmq lookup plugin (#44070).
* PR review feedback updates
* Testing pika is installed
* Minor mods to tests
* Check if connection is already closed or closing
* Updated tests and connection testing
* PR review feedback updates
* PR review include ValueError in AnsibleError output
* Suggesting to use set_fact when using returned variable more than once.
* Cleaned up some tests, added some notes and handling connection closure on some exceptions.
* Removed finally statement and added some additional error handling.
* Added some additional error handling.
* PR review updates.
* Additional integration tests and removing return in finally
* Updated version
* Changing back to running tests on ubuntu.
* Additional tests
* Running tests on Ubuntu only
* Fixing syntax error
* Fixing ingtegration tests and a string/byte issue
* Removed non-required test and fixed BOTMETA
* Trying to fix integration test failure on ubuntu1404
* Some issues occured when handling messages from the queue with to_native. Switching to to_text resolved the issues.
* Renaming channel to queue (thanks dch). Disabling trusty tests.
* macports: Replace update_ports with selfupdate
- Macports discourages use of `port sync` and recommends using `port
selfupdate` instead.
- Keep `update_cache` and `update_ports` as aliases.
- No longer require the `name` parameter so that `selfupdate` can be
used in a task by itself.
* macports: Add upgrade parameter
- New upgrade parameter which can be used to upgrade all outdated ports.
* Add changelog fragment
Fixes#35120 : the redis cache plugin keeps key/value
entries in an in-memory cache to avoid hitting the
redis database each time.
The problem is that a cache entry is only set when
a value is get or set but it is always deleted when
trying to delete a value.
When the --flush-cache ansible-playbook option is used,
the redis cache plugin is first asked to remove every
entry corresponding to every hostname present in the inventory.
As no value as been set/get so far, it then tries to delete
an unexisting value from the cache and hence crashes with
a KeyError exception.
* win_exec: refactor PS exec runner
* more changes for PSCore compatibility
* made some changes based on the recent review
* split up module exec scripts for smaller payload
* removed C# module support to focus on just error msg improvement
* cleaned up c# test classifier code
* New option JUNIT_TASK_RELATIVE_PATH to output relative paths.
It makes the output in Jenkins much more readable as the absolute
path was taking the whole width of the screen, leaving no space for
the actual message.
A makedirs instead of mkdir slipped in as to make the creation of
the output directory recursive, hope this is OK.
* Add version_added field to doc set to 2.8
* Separate networking tools that may be used by modules outside of networking so changes to networking-only utilities don't trigger AWS integration tests
* Add unit tests for moved network utils
* Add comment to prevent imports from being mistakenly removed
* Move to_bits as well
* Check that union Jinja filter can be chained
* set filters: fix unexpected templating type error
this error occurs with Jinja 2.10 since 32ec69d827,
for example when union filters are chained:
$ ansible all -i localhost, -mdebug -a"msg={{ []|union([])|union([]) }}"
localhost | FAILED! => {
"msg": "Unexpected templating type error occurred on ({{ []|union([])|union([]) }}):
unsupported operand type(s) for +: 'set' and 'list'"
}
* fix callback Plugin json to support global stat set by set_stats module
* refactor to not break compatiblity, add trailing comma on output dict
* Remove sorted, as it not needed
* refactor, to sivels better code
* clean some code messup
* add changelog fragment
* added missing new line
* fix pep8 stuff
In a scenario where you've set your logstash heap size high, you may need to set your heap lower in order to execute logstash-plugin while logstash is still running.
Here's an example of someone running into insufficient memory while executing logstash-plugin: https://discuss.elastic.co/t/logstash-plugin-and-jvm-options/99646
This scenario is probably fairly common, so it may be worth documenting as an example.
+label: docsite_pr
* docker_container: Honour stop_timeout when creating docker containers (#43814)
* Adjusting description to what actually happens.
See docker-py changelog for 2.7.0: 'APIClient.stop will
no longer override the stop_timeout value present in the
container’s configuration.'
* Add a test whether stop_timeout can be configured for the container.
* Added changelog.
* Integrate with comparisons (by default, ignore stop_timeout value for restarts; will be configurable with PR ansible/ansible#44789).
* Fix config change code and tests (#2)
* Improving wildcard test.
* Using correct config.
Previously, when the active SELinux value was the same as the desired value, regardless of the value of `persistent`, the module would simply exit successfully, assuming no need for update. This made the assumption that the active and persistent values should be the same, but that is not always the case. This modification treats both the active and persistent values separately when checking for the need to update. Note that the persistent update mode, however, will still update the active as well as the persistent value. If this is not desired, it is possible to separately toggle the active value alone.
Other changes:
* Make the check mode actually perform checks for changes
* Organizes semanage commands into set of logical steps
This prevents a stack trace in Python 3 when the result is an empty file since
the file is open in binary mode and a native string in Python 3 is str,
not bytes.
The stdout and stderr values returned from self._low_level_execute() are text, not bytes. This results in an error in Python 3 since str and bytes cannot be concatenated.
Changing to unicode type allows this to work without error on Python 2 and Python 3.
* modules/systemd: fix logic: allow scope to default to 'system'
Fix logic introduced in 7ea909418e: if 'scope' param is not specified,
it defaults to system, but the value of module.params['scope'] is None,
not 'system' - so allow for that.
* modules/systemd: fix logic: disabled means disabled
Fix logic determining whether a service with both systemd and initd files is enabled or disabled.
In situations where systemd thinks service is disabled, but rc.d symlinks mark it as enabled,
this module wrongly assumes the service is enabled.
Fix this logic: disabled means disabled
Only when the output from does NOT include disabled, consider the status of rc.d symlinks.
This essentially replicates the fixes done to the systemd handling in the "service" module in 3c89a21e0cFixes#22303Fixes#44409
* Fix spelling of 'separate' throughout.
* Various cleanups in the User Guide for Vault.
- Fix spelling of 'algorithm'
- Fix indentation of nested list in payload format
- Fix mysterious refernce to 'b_pkey1'.
- Fix reference to newline as '\n': the backslash is lost when rendered
to the docs website. Specify the hex value for newline instead of the
backslash escape.
* Fix formatting
* Update vault.rst
A lot of modules have a short_description with a trailing dot even
though we don't want trailing dots in the index. This change removes
it when creating the document index.
* Fail on attrs that don't work for includes
* Prefix with VALID_ to make it more clear
* Sort keywords
* Remove unnecessary list
* Adjust dynamic/static checking
In DNF < 3.0 are lists, and modifying them works
In DNF >= 3.0 < 3.6 are lists, but modifying them doesn't work
In DNF >= 3.6 have been turned into tuples, to communicate that
modifying them doesn't work
Further explanation of this is available via Adam Williamson from
the Fedora QA Team.
https://www.happyassassin.net/2018/06/27/adams-debugging-adventures-the-immutable-mutable-object/
Signed-off-by: Adam Miller <admiller@redhat.com>
* win_nssm: add failing tests for issue #44079
* win_nssm: use Run-Command instead of Invoke-Expression to prevent interpretation issue
Fix#44079
* win_nssm: add more failing tests
These tests highlight several issues with this module:
* Service not started when state=started
* Errors with app_parameters (see #25265)
* Exception when passing several dependencies separated by comma as specified in doc
* win_nssm: fix service not started when state=started
Nssm status returns a multiline output that doesn't match any of the strict patterns in the switch statement.
* win_nssm: fix incorrect separator in doc for service dependencies
The dependencies parameter works with space as separator, but not with comma as shown in the documentation
* win_nssm: fix error with app_parameters parameter
Fix#25265
* win_nssm: add idempotence tests
* win_nssm: fix several idempotence issues and misbehaviors
Add missing space between arguments when app_parameters contains several keys.
Use Argv-ToString and Escape-Argument to improve arguments handling (parameters with quotes, backslashes or spaces).
* win_nssm: test parameters with spaces, quotes or backslashes
* win_nssm: restore comma as separator for service dependencies
Revert commit ddd4b4b
* win_nssm: restore support of string as dict form for app_parameters and remove support of literal YAML dict
* win_nssm: wrong variable in tests
* openshift inventory: fix exception when auth fails
Fix 'ForbiddenError' object has no attribute 'message':
[WARNING]: * Failed to parse test.yml with openshift plugin: 'ForbiddenError' object has no attribute 'message'
File "ansible/lib/ansible/inventory/manager.py", line 270, in parse_source
plugin.parse(self._inventory, self._loader, source, cache=cache)
File "ansible/lib/ansible/plugins/inventory/openshift.py", line 122, in parse
self.setup(config_data, cache, cache_key)
File "ansible/lib/ansible/module_utils/k8s/inventory.py", line 58, in setup
self.fetch_objects(connections)
File "ansible/lib/ansible/module_utils/k8s/inventory.py", line 250, in fetch_objects
super(OpenShiftInventoryHelper, self).fetch_objects(connections)
File "ansible/lib/ansible/module_utils/k8s/inventory.py", line 81, in fetch_objects
namespaces = self.get_available_namespaces(client)
File "ansible/lib/ansible/module_utils/k8s/inventory.py", line 95, in get_available_namespaces
raise K8sInventoryException('Error fetching Namespace list: {0}'.format(exc.message))
Don't try to get 'message' attribute from:
- K8sInventoryException instances
- Exception instances
- KubernetesException instances (because KubernetesException can be
Exception)
* move k8s/OpenShift inventory plugin dedicated code
inventory plugin specific code should not be located in
lib/ansible/module_utils directory. Then ansible.utils methods can be
reused (for example Display).
* Remove unused class variables 'helper'
unused since 4d77878654.
* Update win_robocopy.py
<!--- Show example of UNC path copy of a single file, noting trailing backslash required -->
+label: docsite_pr
* addresses jborean comment, removes double quotes
* Remove trailing slash part
* Added feature facts to nxos_facts
* Fixed ansibot indentation
* Resolved ansibot whitespace missing after ','
* Per PR suggestion, created method in base class to gather switch config
and store in global variable to prevent multiple calls to switch.
* Addressed ansibot blank line & whitespace after ,
* Enable support for launch_templates in ec2_asg
* Fix asg create with LT and no version number
* Update mutually exclusive list
* Better function names
Maintain one Templar for the lifetime of VariableManager, calling
set_available_variables() prior to each use, enabling _get_filter()'s
cache to function correctly.
It does not seem possible for concurrent calls into one (non-copied)
VariableManager instance, and so it need not be reentrant. If that
became a requirement, serializing its or Templar's entry points would be
fine, as it's so CPU-heavy other threads will only fight with it for the
GIL anyway.
Reduces _get_filters() runtime 91%, get_vars() runtime 19%, function
call count 16%, overall runtime 10%.
Tested aginst dummy load comprised of the 12 disabled steps of
debops.auth with an inventory of 80 hosts, which stresses variable
processing and task setup. Before:
7447296 function calls (7253994 primitive calls) in 32.611 seconds
Ordered by: cumulative time
ncalls tottime percall cumtime percall filename:lineno(function)
1 0.000 0.000 32.762 32.762 ansible-playbook:3(<module>)
1 0.007 0.007 31.733 31.733 ansible-playbook:21(<module>)
...
1371/971 0.671 0.000 21.332 0.022 manager.py:154(get_vars)
...
3044 0.315 0.000 5.166 0.002 __init__.py:295(_get_filters)
After:
6252978 function calls (6059638 primitive calls) in 29.055 seconds
Ordered by: cumulative time
ncalls tottime percall cumtime percall filename:lineno(function)
1 0.000 0.000 29.218 29.218 ansible-playbook:3(<module>)
1 0.007 0.007 28.159 28.159 ansible-playbook:21(<module>)
...
1371/971 0.675 0.000 17.211 0.018 manager.py:154(get_vars)
...
3044 0.028 0.000 0.441 0.000 __init__.py:295(_get_filters)
* allow jinja2 unique filter compat
* detect if unique is provided, fallback with warning
* handle j2 specific params
* now all filters using unique must pass environment
* added env to tests
also normalized on how we normally import and use exceptoins
* Start of work on pylint plugin to catch due/past-due deprecated calls
* Improve deprecated pylint plugin
* Catch call to AnsibleModule.deprecate also
* Skip splatted kwargs, we can't infer that info
* Add error for invalid version in deprecation
* Skip version if it's a reference to a var
* Disable ansible-deprecated-no-version for displaying deprecated module info
* fix comments
* is None
* Force specifying a version, this can be disabled on a per case basis
* Disable ansible-deprecated-version by default
* Remove to look for 2.8 deprecated
* Revert "Remove to look for 2.8 deprecated"
This reverts commit 4e84034fd104879f429f0262ff0b2317e3d08deb.
* Add script and template used for creating issues for deprecated issues
* Fix underscore var
* Update synchronize.py
If you want a different rsync binary on the local side, you need to set task variable ansible_rsync_path.
See examples.
Variable ansible_rsync_path looks to not be documented anywhere. If documented, needs to be said that is does not belong to synchronise options, instead belongs to tasks. (Sorry, I have no better wording)
* [rabbitmq_binding] Fix the quoting of vhost and other names, which was broken in PR #35651
* Merge missing urllib_parse.quote from PR #42422
* Missed one line, where also needs to be escaped, i.e., the destination
* Various changes to nxos_logging. Plus added purge capibility.
* Made a few new nxapi_logging test cases conditional based on version
and/or platform.
* Addressed PR comments and ansibot shippable. Fixed up nxos_logging documentation format.
* Addressed ansibot shippable issues with whitespaces and documentation.
* Resolved ansibot codestyle trailing whitespace
* adds support for null values to the ternary filter
This change adds a third optional argument to the ternary filter to
handle a null value. If the third option is specified null and false
are treated differently.
For instance, take the following example:
{{ enabled | ternary('no shutdown', 'shutdown') }}
If enabled == True, then 'no shutdown' is used.
If enabled in (False, None), then 'shutdown' is used.
With this change the following is possible:
{{ enabled | ternary('no shutdown', 'shutdown', omit) }}
If enabled == True, then 'no shutdown'
If enabled == False, then 'shutdown'
If enabled == None, then omit
* update documentation with example of filter
* update filter documentation example per comments
* fix logic error in user_guide example
* Ensure that the value of PLUGIN_FILTERS_CFG is treated as type=path, and that we use the standard section of 'defaults' instead of 'default'
* deprecate the default section
* Don't add version_added for the corrected section
<!--- Your description here -->
The documentation states the use of the "value" attribute for environment variables while this should also be the "job" attribute.
+label: docsite_pr
* Sorting args.
* Doing comparisons of options with container parameters in a more context-sensitive way.
This prevents unnecessary restarts, or missing restarts (f.ex. if parameters are removed from ``cmd``).
* Make blkio_weight work.
* Fix cap_drop idempotency problem.
* Making groups idempotent if it contains integers.
* Make cpuset_mems work.
* Make dns_opts work.
* Fixing log_opts: docker expects string values, returns error for integer.
* Adding tests from felixfontein/ansible-docker_container-test#2.
* Make uts work.
* Adding changelog entry.
* Forgot option security_opts.
* Fixing typo.
* Explain strict set(dict) comparison a bit more.
* Improving idempotency tests.
* Making dns_servers a list, since the ordering is relevant.
* Making dns_search_domains a list, since the ordering is relevant.
* Improving dns_search_domains/dns_servers.
* Fixing entrypoint test.
* Making sure options are only supported for correct docker-py versions.
* Update yaml-style in password-lookup example
##### SUMMARY
Update the yaml-style in a password-lookup example to match best-practices.
##### ISSUE TYPE
- Docs Pull Request
##### COMPONENT NAME
password_lookup plugin
##### ANSIBLE VERSION
devel
* remove whitespace
* fixes#45941
* corrects regression introduced by #26104; when the resource group doesn't exist, the module exits prematurely with an error instead of creating it.
* Unify login behavior between 1Password lookup plugins and module
- Use the same names for all credential aspects
- Only require the minimal amount of information for each
- Add more examples
* Change parameter terms
- use terms in line with 1Password documentation.
- update examples
- update tests
* Improve error messages in lookup plugin
* Unify onepassword_facts with lookup plugins
- use same methods and logic for signing in or reusing existing session
- unify terms with lookup plugins
* Change rc test for determing login
An rc other than 1 can be returned when a current login session does not exist.
* Create AnsibleModuleError class
ansible.errors is not available to modules, so create an AnsibleModuleError class within the module
Do not user os.path.expanduser since this is already done by virtue of the type being "path" in the argument spec.
* Add note about risk with fact caching sensitive data
* Add note on op version that was used for testing
This is because underscores are illegals in hostnames and users might
want to create the same host names are the name of the Linode machine
(as in the report in #30059).
Closes https://github.com/ansible/ansible/issues/30059.
* Update azure_rm_virtualmachine.py
A lot of Azure images are not cloud-init ready and need to be prepared manually before attempting to use the custom_data option of this module. Adding a line to the description to make others aware. If, like me, they are used to working with AWS AMIs that all seem to have cloud-init baked in, this could prevent some troubleshooting as to why their custom_data scripts aren't running in Azure.
* fixing addition to azure_rm_virtualmachine.py
* Update azure_rm_virtualmachine.py
* final update
* fixed url syntax
* nuked trailing whitespace
* Ensure that the src file contents is converted to unicode in diff info. Fixes#45717
* Fix up and cleanup
* The diff functionality in the callback plugins should have the
to_text() calls removed since we're now doing it in ActionBase
* catching of UnicodeError and warnings in the callback diff
functionality from 61d01f549f haven't been
needed since we switched to to_text so remove them.
* Add a note to ActionBase's diff function giving an example of when the
diff function will be inaccurate and how to fix it
* Fix callback get_diff() tests
I believe the unittests of callback's get_diff() were wrong. They were
sending in a list where strings were expected. Because previous code
was transforming the lists into strings via their repr, the previous
tests did not fail but they would have formatted the test cases output
in an odd way if we had looked at it.
* Try to intuit proper plugins to send to ansible-connection
* Move sub-plugins to init so that vars will be populated in executor
* Fix connection unit tests
* win async: use async_dir for the async results file directory
* tried to unify POSIX and PowerShell async implementations of async_dir
* fix sanity issue
* handle yum and dnf lockfiles - fixes#44120
Signed-off-by: Adam Miller <admiller@redhat.com>
* fix logic problem to properly check for dnf lockfile glob
Signed-off-by: Adam Miller <admiller@redhat.com>
* Added documentation for collectstatic --clear.
Added a description of the --clear argument used with the Django management
command, collectstatic. (When #1810 added this feature the documentation
was not updated).
no such option "config" for diff_against argument.
Further below, there is an example of eos_config using diff_against with a valid option.
+label: docsite_pr
Also fixes an error related to the required parameters. The l3out parameter is required but only 'name' was being accepted, and that should only be the alias.
* efs.py: Add support for EFS provisioned throughput
* efs_facts.py: Add support for EFS provisioned throughput
* efs_facts integration tests updated with provision throughput
* efs_facts: Tests refactoring - add failure and success playbook according to botocore version.
* efs_facts: More tests and new option descriptions adjustment
* efs_facts tests renamed to efs
* Improve iam_group exception handling
Use AnsibleAWSModule for iam_group and handle BotoCoreErrors
as well as ClientErrors. Use fail_json_aws to improve error messages
* Add minimal iam_group test suite
Update some of the read-only IAM permissions (this is not sufficient
to run the test suite but it gets further than it did until it tries
to add a (non-existent) user)
* Clean up after tests
* Add the key_name/value_name options to dict2items - as with items2dict, allow users to configure the key/value name for dict2items, add "version added" and examples
* Added example to register result of a ping test, including a wait_for command.
* added names to tasks
* updated examples to remove deprecated commands etc
* removed group_var
Since 'organization' is the spelling used accross all others modules,
I think it would be better to at least have this one as a alias.
Organisation is the UK/Australia/NZ spelling, while organization is the
US one.
* Link to the Galaxy platforms list from the meta file template
Fixes https://github.com/ansible/galaxy/issues/52.
* make ansible/ansible text match mazer text on platforms
* Fix targets that may be a list containing strings and lists which worked prior to 2.6.
* Add ec2_group integration tests for lists of nested targets
* changelog
* Add diff mode support for lists of targets containing strings and lists.
The user can use os_loadbalancer module to configure a fully functional
load balancer by specifying the sub-resources definition in the module,
rather than combining os_listener, os_pool and os_member modules.
* reboot: Fix typo and support bare Linux systems
This fixes a problem for bare Linux systems that do not support 'who -b' or 'uptime -s'.
* Accumulate stdout and stderr information
* Fix support for VPC capabilities such as redundant routers or region level VPC
* Add integration test cases for "region level VPC" and "distributed router" capabilities
* Suggest full fingerprint for apt_key.
Background: https://gwolf.org/node/4070 (Gunnar Wolf: Stop it with those short PGP key IDs!)
I've put the full fingerprint into the examples.
* avoids the phrase 'best practice'
* Merge issue
* Update cnos_rollback.py
* Updating license for the refactored method
* Update cnos_rollback.py
* Removing the BSD License as suggested by Legal
* To add Documentation for ENOS as well as CNOS
* Merge issue
* Revert "To add Documentation for ENOS as well as CNOS"
This reverts commit 80e6e39054be0c3a8f95d16dc39ca9d93baf8c4b.
* Adding Docs for ENOS and CNOS
* Update cnos.py
* Update cnos_rollback.py
* Update cnos.py
* Update platform_cnos.rst
* Update platform_enos.rst
* Removed version 2.7
* Removing 2.7
* Return correct version on installed VyOS
Previously existing regexp will shows only "VyOS" without numeric output of router version.
For example: from "Version: VyOS 1.1.6" only VyOS will be written in ansible_net_version variable
For more informative output numeric value should be returned as well
* Fixed unittests
gce_backend_service module expects healthchecks to be an array of string. The previous example incorrectly mentioned healthchecks as an array of objects each containing a `name` key.
* win_script: add support for become and centralise exec wrapper builder
* satisfying the pep8 gods
* do not scan for module dependencies when running as a script
- use context manager for dealing with the checksum file
- use loop that can tolerate zero, one, or more items return rather than the previous expression which would break if anything other than exactly one item was returned
* Show multi-line messages in debug documentation
* Add two-line entry
* Indicate that jinja2 filters are not applied here
* Fix to incorrect documentation change
* Make the following scripts idempotent so that we only have to rebuild changed docs, not all docs:
* plugin_formatter
* generate_man
* dump_keywords.py
* dump_config.py
* testing_formatter.sh
* To change all CLIs present in the code to latest CNOS CLI. One bug of executing with Lenovo Jakku switch is also getting fixed.
* To change the file names as the commands have changed from display to show
* To change to new CLI in test_cnos_comand.py as well
* multiple parents issues in diff
* Integration tests for missing functionality
* add testcase for other platforms. vnxos does not support qos so need to find a command chain on v-nxos for multiple parets. junos uses on-device diff so should not need this.
* Fix for issue when any candidate parent did not meet the exact line in running-config
* DCI runs eos_config without become flag
* Clarify the creates and removes options
The description for the creates and removes options were worded poorly. This change improves readability and is easier to understand.
Double negatives are BAD
+label: docsite_pr
* Fix trailing whitespace
Due to a change in python 3 filters return filter instead of list. This breaks the network name to id lookup for the docker_swarm_module. By wrapping it in list it ensures it is a list when returned and the id is extracted.
* Added client_cert and client_key modules parem
* Use url_argument_spec to init module arguments
* Do not compare version and readOnly
* Convert HTTPResponse content to text before json.loads
* Added password in secureJsonPayload when datasource type is postgres
* Update postgresql_user.py
md5sum generates output with hypen. Something like the following
```
$ echo "md5$(echo -n 'verysecretpasswordJOE' | md5sum)"
md5d011966da94d776cf59bf6dbde240e5d -
```
We need to remove hyphen from the output. Also the command by itself is incorrect
```
echo "md5$(echo -n 'verysecretpasswordJOE' | md5sum")
```
double quotes must be after right parenthesis
```
echo "md5$(echo -n 'verysecretpasswordJOE' | md5sum)"
```
+label: docsite_pr
* Update postgresql_user.py
Add curly braces
On all supported Pythons, the io.BytesIO is always a stream
implementation using an in-memory bytes buffer. Makes code slightly more
forward compatible by reducing use of the six module.
VM customization is not necessary if user is not specifying IP address
and netmask. This fix adds exception for type 'DHCP' which is set by default
if no networking details are provided.
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Fix enabling my.meraki.com
- A parameter of "no" wouldn't be picked up
- Check for False in addition to whether it exists
* Clean up disable_my_meraki parameter check
* Use a sensible default for k8s merge_type
The sensible default for merge_type is `['strategic-merge', 'merge'].
However, we can't make this the default default, as we need to support
users who are using openshift 0.6.0, where the merge_type parameter is
unsupported.
* Refactor k8s test suite for merge_type tests
Allow tests with pre-merge-type openshift and post-merge-type
openshift.
* expect ssh_key_data to be a string instead of path
ssh_key_data should be a string filled with the private key
the old behavior can be archived with a lookup
Fixes#45119
* clarifies ssh_key_data description, adds newline
* rewrite get_resource_pool method for correct resource_pool selection
* only keep name if path is given for cluster, esxi_hostname or resource_pool
* Revert "only keep name if path is given for cluster, esxi_hostname or resource_pool"
* This reverts commit 50293ec763c024b0eaceac5d775ccc0ad3ff8bd7.
* if the name argument contains a path, only use the last part for matching
* remove path from cluster argument in tests
* remove find_objs in favour of reusing find_obj with an extra folder argument
* fix find_obj ignoring first if name is not given
* Refactoring related to network device
* Assign unique random temporary key while creating SCSI or/and IDE controller devices
* Add testcase for this change
Fixes: #38679
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
With this fix user can add, remove and set privileges to
an existing role with privileges.
Fixes: #44391
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Add tests to replicate bug #44788
* Handle when userId is same account due to in-account peering
* Module defaults for main.yml
* Turn off VPC peering tests in CI
* Fix diff_ignore_lines option issue for candidate configuration
* diff_ignore_lines option is to handle the running config fetch from
remote host and ignore the lines that are auto updated eg: commit time and date
* This option should not be used while processing candidate (input) configuration
* Fix review comment
Added examples on how to use "keyed_groups", "hostnames", and "compose"
The compose example shows how to set the ansible_host var for a host to either the public or private ip. This is necessary when you set your hostname by name instead of ip
"python-netaddr" is an OS package, but "netaddr" is the pypi package needed in python. Suggesting OS packages for python libs seems in bad form. I like the syntax "python's netaddr" to explain what package manager would have it.
* Fix spurious `changed=True` when int is passed as tag
* Fix for all AWS module using compare_aws_tags
* Handle improperly stringified protocols and allow inconsistency between None/-1 on non-tcp protocols
* Add integration test that reproduces the same bug
* Return false if the comparsison is not equal
Tested an install on a Nexus 5596 and was failing due that this model will send an output of "Another install procedure maybe in progress" when running the show install all while the install is running. This is how the module knows that an install is being processed. In my case, it will not match that conditional statement.
* Previously when checking out a subdirectory, if changes are made in the
repository that aren't present in the subdirectory (i.e. in a different
branch or similiar) then the changes handler still kicks in even though
the content of this working copy hasn't necessarily changed. Now we parse
the output of svn update and fire if anything changes at all.
* Previously when checking out a subdirectory, if changes are made in the
repository that aren't present in the subdirectory (i.e. in a different
branch or similiar) then the changes handler still kicks in even though
the content of this working copy hasn't necessarily changed. Now we parse
the output of svn update and svn switch, firing if anything changes at all.
* Should not be executable
* ==None doesn't do what I want, is None does
* Add definitive to valid_simple_controls in pamd module
* Add changelog fragment for issue 44278
* Adjusted module name to not include path or extension
Previously, it returned no additional information:
"msg": "Could not update catalogue"
Now it passes that reason with the error message:
{"changed": false, "msg": "Could not update catalogue [77]: pkg: Insufficient privileges to update the repository catalogue.\n"}
build its intersection set and unnecessarily unique the final result.
The prior use of the intersect() function within the list comprehension
conditional leads to the function being called for every value in the input
list being processed, not efficient. When the input lists a,b are large,
the Ansible run time and resource utilization wildly increases generally
never completing the operation.
Unique of the intersection result is unnecessary as the source list union()
is already unique.
There are several services e.g. vmware-fdm, which does not have package name and
package description which will raise a error if queried for.
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Fix netconf netconf issues
* Identifier is optional for get_schema api
* Fix dispatch api mandatory argument check
* Add save option handling to copy config from target datastore
to startup datastore if supported
* Validate config in check-mode or if validate option set to true
* Copy config if check-mode is not enabled
* Update lineinfile.py
The document should call out in the regexp section what regexp does in non-match scenario, not just leave it for the reader to find it under `insertbefore` and `insertafter`.
+label: docsite_pr
* Update lineinfile.py
fixing for lint
* Use multiple entries
* Add elapsed return value to select modules
It can be quite useful to know exactly how much time has elapsed
downloading/waiting. This improves existing modules or updates
documentation.
* Ensure elapsed is always returned
* Added changelog fragment
* Refactoring code to adhere to persistence connection.
* Update cnos_rollback.py
* Updating license for the refactored method
* Update cnos_rollback.py
* Removing the BSD License as suggested by Legal
* Adding cnos_image after testing on sftp. Test code is also added
* Removing debug comments
* adding space
* Add check in network_cli to handle all prompts
* Add check_all flag to mandatory handle all the command prompt
in prompts list. By default if any one prompt is handled
remaining prompts are ignored.
* Fix cli_command multiple prompt issue
* If multiple prompt and answers are given as input network_cli
handles only the first prompt that matched by default
* If a command execution results in muliple prompt the fix
add support to set a boolean option C(check_all) to indicate
network_cli to wait till all the prompts and answers are processed.
* Update cli_command
* Update api doc
* Fix unit test failure
* Fix CI failure
* Update network_cli
* Fix review comment
updates to azure_rm_sqlfirewallrule
small fixes
move sql client to common
adding state
fixed sample
fixed sanity
fixed aliases
removed unnecessary object
removed unused resource_group
changed group to less crowdy
tags
no tags on firewall rule
* Add functions to retrieve the allowed and required parameters for boto3 client methods
* Add custom waiter for stopping an RDS DB instance
* Add rds_instance module
* Add rds_instance integration tests
* address requested changes from ryansb
* address requested changes from willthames
* address requested changes from dmsimard
* Fix final snapshots
Fix idempotence with already-deleting DB instances
Remove unused import from module_utils/aws/core.py
Consolidate function to get all boto3 client method parameters and the subset of required parameters
* Add some additional rds_instance integration tests
* Add some common functions to module_utils/aws/rds
* Move common code out of rds_instance
* Remove hardcoded engine choices and require the minimum boto3
* Document wait behavior
* Provide a list of valid engines in the error message if it is invalid
Add supported methods to whitelist
Remove AWSRetry around waiter
Wait for a less crazy amount of time
Remove unused variables
* Add a test for an invalid engine option
* pep8
* Missed adding a method to the whitelist
* Use retries
* Fix some little things
* Fix more things
* Improve error message
* Support creating cross-region read replicas
* Remove unused imports
* Add retry when getting RDS instance
* Soft-check required options so module fails properly when options are missing
* Fix mariadb parameter version
* Fix cross-region read_replica creation and tests
* fix modify tests
* Fix a modification test
* Fix typo
* Remove test for option_group_name that exists for this account but may not for others and added as a TODO to do properly
* win_wait_for_process: Add integration tests
* Disable reporting changes
* Added more tests checking PID
* Various improvements
This PR includes:
- Use Get-Process instead of CIM Win32_Process
- Rewrite of process filter logic (speedup)
- Fix error messages
- Fixes to documentation, examples and return output
* win_wait_for_process: Limit to PowerShell 4 and higher
* Improve RESULT documentation
* Last minute fixes for CI
* Catch Powershell exceptions
* Increase timeout to make tests more stable
* Make merge_type a list and apply merge_type in order
Allow use case of preferring strategic-merge and failing
back to merge, or just preferring a different merge type
* Improve k8s module test coverage
* flatpak_remote: Fix the comparison between string and bytes for the remote_exists function
* Use to_text instead a new compare function
* Compare bytes to bytes
* Add WTI OOB and PDU Device status, control and configuration module
* removed accidental file inclusions
* removed accidental file
* re-add cpm_metering
* was gettign a ERROR: Command "docker exec from GitHub, so this is a retry
* removed un-needed files
* removed old cpm_metering
* removed cpm_metering.py
* re-add cpm_metering
* removed pyc file
* re-added cpm_metering.py
* cleaned up EXAMPLES indentation
* EXMAPLES startdate, enddate had : instead of = to indicate a value
* Fixed missing whitespace around arithmetic operator
* Add module redfish_command
Communicates with Out-Of-Band Controller through Redfish APIs
Sends a command to execute an action
* Wrapped all instances of result['msg'] inside to_native()
* Added more entries to Description section
* Minor fixes for PEP8 compliance
* Update the root URI to match the DMTF specification
* Display valid Categories or Commands in case invalid value given
* Updated returned values and description
* Add module redfish_config
Communicates with Out-Of-Band Controller through Redfish APIs
Sends a configuration update to the Controller
* Wrapped all instances of result['msg'] inside to_native()
* Added more entries to Description section
* Minor fixes for PEP8 compliance
* Update the root URI to match the DMTF specification
* Display valid Categories or Commands in case invalid value given
* Updated returned values and description
* Add default values to bios and mgr variables
* Fix iosxr cli_config module diff issue
* Modify iosxr plugin to support configuration
diff capability (get_diff()) within Ansible
to be in sync with iosxr_config module.
* Fix unit test case failure
* initial source of the elb_target_facts module, which gathers all
registered ELBv2 target groups for a given instance id
* updating
* initial dump of tests
* updating docs, adding AWSRetry decorators
* updating tests
* More brush up, some refactoring
* updating for sanity tests
* removing extra space
* updating elb_target_facts to use a new name for the return value, not return a fact, and use instance variables for the AWS connections. updating tests to go along with that
* updating classes to be 'new-style' classes
* Fix 'macro name' timeout
Added function to send macro to device using 'sendonly'.
* Filter 'macro' from normal commands
* Removed white space
* Undefined variable 'cmd'
* Fixed netapp_e_lun_mapping options for backwards compatibility.
Readd lun and target_type as deprecated options.
Note: lun and target_type were removed in patch #44666 since they were
no longer needed for the logic in the module. However, this cause will
cause existing playbooks utilizing these options to break.
* Add lun specification and target_type verification for netapp_e_lun_mapping
* Fix typos in docker_login reauthorize parameter
* Remove note about docker_login email address
Docker Hub no longer requires an email address.
* Remove check for email parameter with Docker Hub
This is no longer required, so login should not fail if it's not provided.
- Add support for installing specific variants of a port.
- Add support for using yaml lists with 'name' parameter, rather than comma-separated lists.
- Add to and clarify documentation and examples.
- Use Macports nomenclature:
- s/package/port/g
- Rename update_cache to sync_ports but keep update_cache as an alias. Remove undocumented update-cache alias.
- Remove undocumented 'pkg' alias for 'name'. Replace with 'port' alias and document it.
- Print stdout and stderr output if `port sync` fails.
- Print stderr output, rather than stdout, if `port install/uninstall/activate/deactivate` fail.
* Only handle cpu_shares, volume_driver, auto_remove as in _host_config().
* Don't compare log_options (resp restart_retries) if log_driver (resp restart_policy) is not specified.
* Warn that log_options (resp restart_retries) is ignored if log_driver (resp restart_policy) is not specified.
If values="somestring" is specified then this module normalizes it to
["somestring"]. This means that passing name="foo", values="",
state=exact results in the ldap entry having a single attribute called
foo="".
To delete all attributes "foo", regardless of their values, it is
necessary to pass name="foo", values=[], state="exact".
This patch adds a new `backend_config` parameter that allows to provide the
-backend-config parameter during the terraform init command.
The option allows to dynamically set the backend information, like the s3 bucket name
and statefile name.
* Clarify docs re mode's octal representation
I changed the language about how to use mode to make it more obvious
that using "01777" is not a typo, because the leading zero is not meant
to reflect the way that number might have been given on a command line.
See also: issues #5409#9196#11385#13115#18952#23491#23521
* Refactoring code to adhere to persistence connection.
* Update cnos_rollback.py
* Review comment of Qalthos incorporated
* Updating license for the refactored method
* Update cnos_rollback.py
* Removing the BSD License as suggested by Legal
* scaleway inventory: remove useless duplicate
* scaleway inventory: allows to connect using private ip
ansible_host was hardcoded and it was not possible to connect using
private addresses.
This allows to define multiple host variables, values are templates
which can use hosts details send by API. For example this config file
use private address and defines two variables:
plugin: scaleway
hostnames:
- hostname
variables:
ansible_host: private_ip
state: state
image: image.name
regions:
- ams1
inventory will looks like:
{
"_meta": {
"hostvars": {
"testhost": {
"ansible_host": "10.1.1.1",
"arch": "x86_64",
"commercial_type": "START1-M",
"hostname": "testhost",
"id": "af669464-0c74-4c89-8573-9fe763028448",
"image": "CentOS 7.4",
"organization": "2cc9a115-380d-4ac0-ba4b-8947eee71325",
"public_ipv4": "163.172.1.1",
"public_ipv6": "2001:bc8::1",
"state": "running",
"tags": [
"testtag"
]
}
}
},
[...]
}
* Add common and Swagger client utils for FTD modules
* Update FTD HTTP API plugin and add unit tests for it
* Add configuration layer handling object idempotency
* Add ftd_configuration module with unit tests
* Add ftd_file_download and ftd_file_upload modules with unit tests
* Validate operation data and parameters
* Fix ansible-doc, boilerplate and import errors
* Fix pip8 sanity errors
* Update object comparison to work recursively
* Add copyright
`items` is a *terrible* return key for ansible as Jinja
will often think it refers to the `items()` function.
Even though you can typically work around this with
`results['items']`, sometimes even that doesn't work:
```
- name: Resources should exist
assert:
that: item.status.phase == 'Active'
loop: "{{ k8s_namespaces['items'] }}"
```
```
fatal: [testhost]: FAILED! => {"msg": "Invalid data passed to 'loop', it
requires a list, got this instead: <built-in method items of dict object
at 0x109dc9c58>. Hint: If you passed a list/dict of just one element,
try adding wantlist=True to your lookup invocation or use q/query
instead of lookup."}
```
Change it now while we still can.
* add win_wait_for_process
* try working on additional filter options and fix derps
* improve process name matching: support arrays. support pre and post wait
* use CIM instead of WIM. requre exact contain process binary extension
* updates to metadata
* fix errors in waiting for process to start
* validate process min count for absent state. fix typo
* fix bug if only one processes is detected
* address GitHub comments
* Add new session parameter to win_psexec
* Indicate which version the session option was added in
* Added changelog fragment and minor edit on doc entry
- Fix comma separated list handling for package names
- Fix error message for unavailable/unknown package install attempt
- Fix pkg install result output generation
Signed-off-by: Adam Miller <admiller@redhat.com>
* Define netapp_e_mgmt_interface storage module.
The netapp_e_mgmt_interface module provides management configuration for
e-series storage array interface points including remote ssh access, NTP
and DNS services.
This patch also includes integration and unit tests.
* Fix netapp_e_mgmt_interface ssh option documentation and name/channel exclusivity.
Email alerts can be enabled for an E-Series system to provide
information to interested users by email when a warning or critical
level event occurs on the system. This module will allow a system owner
to configure whether or not system alerts are enabled, and who will
receive them.
* New module for NTAP E-Series iSCSI Interfaces
Define a new module for configuring NetApp E-Series iSCSI interfaces.
* Improve netapp_e_iscsi_interface integration tests
Restructured integration test to set all iscsi ports to disabled, then
defines the ports either statically or with dhcp, next updates the ports
with the other definition type (static <-> dhcp), and lastly disables
all ports. Each netapp_eseries_iscsi_interface call is verified with the
array.
* Define NetApp E-Series ASUP module
ASUP, or Auto-Support, is a mechanism that allows NetApp support
to receive information on the status of E-Series storage-systems
in order to proactively resolve issues for customers. This module
gives customers the ability to tune ASUP settings to their liking,
including disabling the feature entirely.
* Improved testing for netapp_e_asup module
Added coverage and validation to asup integration and unit testing
* Working through tests and fixing dumb mistakes
* Fix sanity issues and tests. All G
* Correct type test for azure_rm_networkinterface
* azure_rm_networkinterface correct type comparison
* Post rebase cleanup
* Remove erroneous reference to dns_servers
There are multiple settings that are defined at a global level for
E-Series systems, but don't necessarily fit with anything else. This
module is intended to provide a place to encapsulate those.
* Create copy of HostConfig object before adding it to results.
* Create general sanitize function in docker_common. Using it for all return values of docker_container.
* Make Python 2.6 compatible.
* Check if service is already masked
Newer versions of Systemd now report a 'LoadError' when the unit file
is masked. This causes the play to fail with an error stating that the
service is already masked.
Now the systemd module checks if the service is masked and doesn't
fail if it's masked and LoadError is reported.
Fixes issue #42384.
* Remove useless parens
* YUM4/DNF compatibility via yum action plugin
DNF does not natively support allow_downgrade as an option, instead
that is always the default (not configurable by the administrator)
so it had to be implemented
- Fixed group actions in check mode to report correct changed state
- Better error handling for depsolve and transaction errors in DNF
- Fixed group action idempotent transactions
- Add use_backend to yum module/action plugin
- Fix dnf handling of autoremove (didn't used to work nor had a
default value specified, now does work and matches default
behavior of yum)
- Enable installroot tests for yum4(dnf) integration testing, dnf
backend now supports that
- Switch from zip to bc for certain package install/remove test
cases in yum integration tests. The dnf depsolver downgrades
python when you uninstall zip which alters the test environment
and we have no control over that.
- Add changelog fragment
- Return a pkg_mgr fact if it was not previously set.
* Share the implementation of hashing for both vars_prompt and password_hash.
* vars_prompt with encrypt does not require passlib for the algorithms
supported by crypt.
* Additional checks ensure that there is always a result.
This works around issues in the crypt.crypt python function that returns
None for algorithms it does not know.
Some modules (like user module) interprets None as no password at all,
which is misleading.
* The password_hash filter supports all parameters of passlib.
This allows users to provide a rounds parameter, fixing #15326.
* password_hash is not restricted to the subset provided by crypt.crypt,
fixing one half of #17266.
* Updated documentation fixes other half of #17266.
* password_hash does not hard-code the salt-length, which fixes bcrypt
in connection with passlib.
bcrypt requires a salt with length 22, which fixes#25347
* Salts are only generated by ansible when using crypt.crypt.
Otherwise passlib generates them.
* Avoids deprecated functionality of passlib with newer library versions.
* When no rounds are specified for sha256/sha256_crypt and sha512/sha512_crypt
always uses the default values used by crypt, i.e. 5000 rounds.
Before when installed passlibs' defaults were used.
passlib changes its defaults with newer library versions, leading to non
idempotent behavior.
NOTE: This will lead to the recalculation of existing hashes generated
with passlib and without a rounds parameter.
Yet henceforth the hashes will remain the same.
No matter the installed passlib version.
Making these hashes idempotent.
Fixes#15326Fixes#17266Fixes#25347 except bcrypt still uses 2a, instead of the suggested 2b.
* random_salt is solely handled by encrypt.py.
There is no _random_salt function there anymore.
Also the test moved to test_encrypt.py.
* Uses pytest.skip when passlib is not available, instead of a silent return.
* More checks are executed when passlib is not available.
* Moves tests that require passlib into their own test-function.
* Uses the six library to reraise the exception.
* Fixes integration test.
When no rounds are provided the defaults of crypt are used.
In that case the rounds are not part of the resulting MCF output.
* including test case using environment variables as per issue #44163
* including missing environment variable in shared documentation fragement, related to issue #44163
* fixes parameters via environment variables, issue #44163
The AWS API and console docs are inconsistent about whether EC2 instances have IAM profiles or roles. Things which follow the API tend to use profile but the console uses “IAM Role”. This adds that term to the help text so it's searchable.
+label: docsite_pr
* Switch to LiteralPath instead of Path. Closes#44508
* add changelog fragment
* fix line endings and remove final empty line
* Minor text changes in changelog
* Override description for account_key_src and account_key_content to also mention private_key_*.
* Convert generic OpenSSL/cryptography remark from description to note.
This avoids the whole description list to be sorted alphabetically, which will be done by plugin_docs.py in case description is mentioned in both module fragment and module itself.
* Moving more notes to the notes: section.
* Uniformization of first paragraph. Mainly mention ACME supporting CAs, and only then mention Let's Encrypt as one of them.
* Adjusting to current drafts.
* Adjusting to updated drafts.
* Harmonizing short module descriptions.
* Referencing helper modules.
* Move general Let's Encrypt remark to doc fragment.
* Changing some Let's Encrypt references to more generic statements.
This fix allows user to specify idle timeout for fetch_url used
internally in IPA connection and post_json call.
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Added nios_txt_record module
Whitespace cleanup and version fix
First stab at txt record integration test
Fix for CI version requirement
Added nios_txt_record module
Whitespace cleanup and version fix
First stab at txt record integration test
Fix for CI version requirement
force re-run
* added alias for cloud group1
This PR includes:
- Removal of maintainers that are listed as author in the module
- Removal of entries that do not extend the original author list
- Move ignored-statement to namespace/directory (where useful)
- In some cases, fix the authors-list or add missing github id
We end up with a list of exceptions/additions and a large set of
namespace/directory maintainers or team of maintainers.
Some entries could be further improved by discussing with some
maintainers.
* Fix ansible-doc wrt removed modules
* Fix listing of modules ia ansible-doc to not complain about removed modules
Removed modules are marked as such in the metadata but nowhere else.
Need to retrieve the metadata when a module doesn't have a doc so that
we can tell if it falls under this case.
* omit removed modules from json dump
* Print an error that the module has been removed if attempting to run
ansible-doc on that specific module
* Get plugin_formatter to stop outputting removed modules
* Removed modules no longer have documentation
Decided this was causing people to think that modules were supported
even after being removed. This change is a new strategy to have the
error message trying to use a removed module point people to the older
documentation.
* Add stubs for modules removed in 2.7
These are freshly removed so we want people who are still using them
when they upgrade Ansible to have a hint as to where to find information
on how to port.
* Finish properly undeprecating include
include was undeprecated earlier but not all of the pieces that marked
it as deprecated were reverted. This change fixes the remaining
pieces
The AnsiballZ optimization which only uses one pyton interpreter
currently monkeypatches the arguments into a global argument in module_utils
so we need to always include basic.py. In the future we should fix this
so that it monkeypatches its own file. That way we won't need to always
include basic.py
* elb_application_lb: fix dangerous default of deleting an ELB if state is omitted by changing state to default to present to be more like other AWS modules
* expend checksum format to <algorithm>:(<checksum>|<url>)
* continue to code at office
* ALPHA - expend checksum format to <algorithm>:(<checksum>|<url>)
* clean up tmpfile and comment
* try to add test code for 27617
* try to add test code for 27617
* try to add test code for 27617
* try to fix [Could not find or access 'testserver.py']
* fix test code [Could not find or access 'testserver.py']
* fix test code [add files dir]
* fix test code [files dir not exists]
* as [connection was closed before a valid response was received]
* [connection was closed before a valid response was received]
* [connection was closed before a valid response was received]
* add test item [sha1 and sha256]
* since [connection was closed before a valid response was received]
* fix [connection was closed before a valid response was received]
* fix test code typo
* add docs for #27617
* PR #43751 is minor change
* fix pep8 issue.
* fix test code style.
* fix unexpected quote
* Resolve issues in NetApp E-Series Host module
The E-Series host module had some bugs relating to the update/creation
of host definitions when iSCSI initiators when included in the
configuration. This patch resolves this and other minor issues with
correctly detecting updates.
There were also several minor issues found that were causing issues with
truly idepotent updates/changes to the host definition.
This patch also provides some unit tests and integration tests to help
catch future issues in these areas.
fixes#28272
* Improve NetApp E-Series Host module testing
The NetApp E-Series Host module integration test lacked feature test
verification to verify the changes made to the storage array.
The NetApp E-Series rest api was used to verify host create, update, and
remove changes made to the NetApp E-Series storage arrays.
When removing an instance via its ID, it is not clearly explained that one should use the `name` parameter.
Also a simple example is provided.
+label: docsite_pr
This PR includes:
- Use uppercase in descriptions
- Add trailing dot to descriptions
- Grammar/spelling fixes
- Adding names to examples as a best practice
- Simplify structure
* issue:43021 add support for onyx version 3.6.6000
Signed-off-by: Samer Deeb <samerd@mellanox.com>
* issue:43021 add support for onyx version 3.6.6000
Signed-off-by: Samer Deeb <samerd@mellanox.com>
* Update docs
* Add reboot action plugin
Refactor win_reboot so it is subclassed from reboot
* Use new connection methods
* Test fixes
* Use better uptime command for Linux
Use who -b to get the last time the system was booted rather than uptime, which changes every second.
* Use distribution specefic commands and flags
Query the managed node to determien its distribution, then set the appropriate command and flags.
* Tune debug messages a bit
* Update module docs with details about pre_reboot_delay
s docs
* Ensure that post_reboot_delay is a positive number
* Remove the stringification
* Add integration tests
* Make sure aliases are honored
* Handle systems that have an incorrect last boot time
SystemD and fakehw-clock do not properly set the
last boot time and instead always set it to epoch.
Use a different command if that is the case.
* Copyright and encoding fixes
* Minor fixes based on feedback
* Add exponential backoff to sucess check method
* Update integration test
Skip the integration test if it would try to reboot the control node. We need a new mechanism to account for this scenario in ansible-test, so tests must currently be run manually for this plugin.
* Update integration test
Skip the integration test if it would try to reboot the control node. We need a new mechanism to account for this scenario in ansible-test, so tests must currently be run manually for this plugin.
* Fail early with running with local connection
* Update docs based on feedback
* minor refactoring, state mgmt changes
The 'free' strategy still attempts to do all hosts per task before going to the next, it just doesn't wait for slow hosts,
This strategy processes each host as fast as possible to the end of the play before trying to process another host in the pool.
* Add (preview) diff mode support ec2_group
* Add diff mode to some ec2_group integration tests
* Remove unnecessary arguments and add comment to the module notes
* Add changelog
Since the ACI modules (like most network-related modules) run on the
local controller, this PR adds the necessary details so users are aware
of this particular feature.
When creating a new account, check to see if the expiration parameter is negative and pass in the appropriate parameter. Since the negative integer passed into expires is converted to time.struct_time which in turn gets converted to a formatted time string when passed to the underlying command, a -1 or large negative number would result in passing a date before 1970-01-01 to the underlying command.
This had the opposite effect of creating an account with no expiration account resulting in a newly created account that was already expired, or just throwing an error on certain systems.
* gather_subset is a list of strings
When gather_subset is an integer, a message pointing out the problem, current tb error
is replaced by this one:
ERROR! the field 'gather_subset' should be a list of (<class 'str'>,), but the item '42' is a <class 'int'>
...
* gathering_facts test: ensure smart gathering is on
* Currently network_cli support multiple prompts
single answer as response. This PR adds support
for multiple answers.
* In case of multiple prompts and mulitple answers the
index of a particular prompt in the prompts list should
match with the index in the answer list.
In python 3.7.0, changes in `ssl.py` breaks `smtplib.SMTP_SSL`, which
then breaks `mail` module in ansible.
Run this line in python shell:
import smtplib;smtplib.SMTP_SSL().connect(host='smtp.gmail.com', port=465)
Before python 3.7.0, we will get:
(220, b'smtp.gmail.com ESMTP j13-v6sm3086685pgq.56 - gsmtp')
In python 3.7.0, we get such error at `lib/python3.7/ssl.py` line 843, method `_create`:
ValueError: server_hostname cannot be an empty string or start with a leading dot.
The ssl module is using host info on SMTP_SSL instance, which is not set.
The fix/workaround is simple, just pass host info to it:
import smtplib;smtplib.SMTP_SSL(host='smtp.gmail.com').connect(host='smtp.gmail.com', port=465)
Fixes: #44550
Signed-off-by: Guo Qiao <guoqiao@gmail.com>
This prevents the accidental creation of TXT records where every
single word gets split into its own string, such as TXT record values
in the format of `"foo" "bar" "baz"`. That being an implicit behavior
I have very hard to see anyone purposely relying on.
TXT record values can still explicitly be defined as one or more
strings, without any change in syntax.
Resolves#43380
* adding next network pluggin
* include exclude option for next_ip search
* changing example provider input
* adding new line at end
* version added info
* to fix shippable errors
* to fix shippable errors
* adding exclude option in doc section
* fix review comment
* fix review comment
* Correct the default doc for attached in ec2_eni
Also corrected a typo in the summary
* Address ansible-test sanity error about E324
* Fix and remove the E325 suppression for ec2_eni
Extends `module_defaults` by adding a prefix to defaults `group/` which denotes a builtin list of modules. Initial groups are: `group/aws`, `group/azure`, and `group/gcp`
* add route module
* add test
* add table
* add route table
* fix dict
* fix
* fix
* route table accept no name
* add default
* fix
* fix
* fix
* fix pep
* support route table
* fix line ending
* fix pep
* fix
* fix
* set the default to 'None'
* make return value only id
* camel and snake
* set test alias
* change facts line ending
* change test
* fix
* add default
* fix
* fix line break
* remove unsafe args
* fix comment
* fix
* adding postgresql server facts
* updating postgresql server facts, minor changes
* changed return dict to list
* fixed test
* fixed several issues
* several updates
* fixed naming
* list -> complex
* try again
* fixed mistake
* added user_visible_state to the result
* added fully_qualified_domain_name
* fixed second test
* updates
* fixed test
* updated samples in return value
* wait for postgresql server to be actually ready
* another approach for test
* second server was not created
* fixing pr comments
* fix sanity
* removed forgotten ansible_facts
* added account_alias in the response of module aws_caller_facts
* added comment to explain list_account_aliases
* renamed caller_identity to caller_facts as the content is extended
* created changelog
* security-policy needs the iam:ListAccountAliases for this module to work
* test now checks for the added field account_alias
* gracefully handle missing iam:ListAccountAliases permission
* Added helper module for generating ACME challenge certificates.
* Soft-fail on missing cryptography. Also check version.
* Adding integration test.
* Move acme_challenge_cert_helper from web_infrastructure to crypto/acme.
* Adjusting to draft-05.
* The cryptography branch has already been merged.
Wow, this does not seem to be an uncommon misspelling. Might be there
are some left that span over two lines. I noticed the one in the git
module and then used `grep -rw 'the the'` to find some more.
Many OpenStack modules provide the ability to register a resource in a
project other than the one being used to authenticate with, by adding a
project parameter to the module. Examples include os_network, os_subnet,
and os_router. This change adds a project parameter to the
os_security_group module.
Fixes: #34467Fixes: #30292
This allows to parse the output when the user's locale changes the
commands' output. For example chkconfig uses 'Ein' and 'Aus' instead of
'on' and 'off' when using LANG=de_DE.UTF-8 breaking the service
detection on RHEL 6.
* Docker: Convert units for kernel_memory
Other memory arguments already use human_to_bytes to convert the
units. This change makes the behavior more consistent.
* Update Docker unit parsing documentation
This explains the units more precisely and makes the documentation
more consistent.
This fixes#16526.
when using only an activation key without any channels.
As already suggested by mattclay in
https://github.com/ansible/ansible/pull/25079
and also patch unit test for rhn_register and
add test case for activationkey only
Add _flushed_hosts dict to store when handlers are flushed and prevent them
to be executed too early using _filter_notified_hosts.
Add _wait_on_handler_results to wait only for handlers to be completed.
Remove only hosts that have been flushed from handler notified list.
Fix#31504, #23970
Fixes#43653
- Change descrtiption parameter default to null.
When reading an empty description from AD, powershell returns a null.
- Convert after and before diff keys to ordered hashes.
Unordered state descriptions make --diff report equal values as
changes.
OpenNebula 5.5.8 expects int in DISK_SIZE field when you create a vm, not a float.
For example, "42 GB" should be sent to OpenNebula API as "43088", not as "43088.0". MEMORY you cast to int explicitly, but DISK_SIZE not.
Portions of the f5-sdk were removed as well as the netaddr library
and were replaced with libraries that are part of ansible. Additionally,
deprecated code has been removed.
Cloudflare's DNS API deals with the case insensitivy of DNS names and
IPv6 addresses by forcing them into lower case. To properly be able to
detect changes the Ansible module needs to behave accordingly.
To what extent the API expects sent DNS names to be lower case varies
between record types. Yet, since sending lower case always works, and
since we always get lower case back, it feels cleanest to use lower
case for all DNS names.
* Use newer is_sequence function instead of MutableSequence. Fixes#44327
* Add changelog for #44331
* Update changelog fragment to describe the fix in more detail
Fixes#40650Fixes#40245Fixes#41541
* Refactor netconf_config module as per proposal #104
* Update netconf_config module metadata to core network supported
* Refactor local connection to use persistent connection framework
for backward compatibility
* Update netconf connection plugin configuration varaibles (Fixes#40245)
* Add support for optional lock feature to Fixes#41541
* Add integration test for netconf_config module
* Documentation update
* Move deprecated options in netconf_config module
* init remote_vv_file
* update documentation
* update documentation 2
* update description
* add correct style of ovirt info
* update documentation
* correct line width in docs
* use correct end line in docs
* Add WTI OOB and PDU Device status, control and configuration module
* reorganized module names, removed multiple modules
* Fixed sanity check failures
* Fixed sanity check failures
* Fixed sanity check failures
* Fixed sanity check failures
* moved module from network directory to remote_management.
added validate_certs parameter
added example returned data.
* pep8 issues
* cpm_status code removed from module section and placed in plugins/lookup.
Modified module code to lookup style code
* EXAMPLE spacing format error
* EXAMPLE formatting
* removed split_line parameter. Return is exclusively formatted JSON
* display edits
* delete display debug text
* Change the examples to use YAML rather than k=v shorthand
* re-enabled "required" flags for cpm_username and cpm_password
* moved redundant ansible.module_utils._text import of to_native to previous ansible.module_utils._text import line
* Got unusual error from GitHub checkin of Unstable, bump to see if it happends again.
* New boto3_facts module
boto3_facts aims to help users see whether their python and module
versions are as expected.
* Rename to `assert_python_requirements`
* Update integration tests
* Document options
* fix imports
* boilerplate
* fix docs
* reorder import
* Make distutils optional and fail gracefully when it is not available
* fix example doc
* fix docs on requirements_facts
* Don't use copy.deepcopy in high workload areas, use deepishcopy. ci_complete
* Add tests
* Add changelog fragment
* rename to naive_deepcopy and add extra docs
* Rename to module_response_deepcopy and move to vars/clean
One can install alternate packages managers on debuntu machines.
However, doing so doesn't mean you want to suddenly start using them.
Add in a check similar to the fedora yum/dnf check that sets apt as the
pkg_mgr if the ansible_os_family is Debian.
This commit introduces a new module called vultr_network_facts.
This module aims to return the list of networks avaiable in Vultr.
Sample available here:
```
"vultr_network_facts": [
{
"date_created": "2018-08-02 11:18:49",
"id": "net5b62e8991adfg",
"name": "mynet",
"region": "Amsterdam",
"v4_subnet": "192.168.42.0",
"v4_subnet_mask": 24
}
]
```
The documentation defines `cpu` as:
```
default cpu type
default value: kvm64
```
Therefore defining `cpu` with `8` in the `examples` section makes no
sense. So changing to `cores`.
Signed-off-by: Christian Rebischke <Chris.Rebischke@posteo.de>
When a datacenter has multiple clusters it is required to use the
cluster name to find the correct default resource pool to import
OVF images to.
Fixes issue 42644.
Signed-off-by: Michael Cronenworth <mike@cchtml.com>
* add example using the "when" keyword
<!--- Your description here -->
add example using the "when" keyword comparing group_var variable to returned value from ios_facts
+label: docsite_pr
+label: issue #311
* Update ios_config.py
* Update ios_config.py
* Refactor yum and dnf, add feature parity
Signed-off-by: Adam Miller <admiller@redhat.com>
* remove unnecessary module_utils, move the classes into the module code
Signed-off-by: Adam Miller <admiller@redhat.com>
* remove yum -> yum4, out of scope
Signed-off-by: Adam Miller <admiller@redhat.com>
* use ABCMeta
Signed-off-by: Adam Miller <admiller@redhat.com>
* re-arrange run() caller vs callee
Signed-off-by: Adam Miller <admiller@redhat.com>
* make sanity checks happy
Signed-off-by: Adam Miller <admiller@redhat.com>
* fix yum unit tests
Signed-off-by: Adam Miller <admiller@redhat.com>
* remove unecessary debug statements, fix typo
Signed-off-by: Adam Miller <admiller@redhat.com>
* fix licensing and attribution in yumdnf module_util
Signed-off-by: Adam Miller <admiller@redhat.com>
* include fix from PR 40737
original commit 5cbda9658a
original Author: Strahinja Kustudic <kustodian@gmail.com>
yum will fail on 'No space left on device', fixes#32791 (#40737)
During the installing of packages if yum runs out of free disk space,
some post install scripts could fail (like e.g. when the kernel
package generates initramfs), but yum would still exit with a status
0. This is bad, especially for the kernel package, because it makes
it unable to boot. Because the yum module is usually used for
automation, which means the users cannot read every message yum
prints, it's better that the yum module fails if it detects that
there is no free space on the disk.
Signed-off-by: Adam Miller <admiller@redhat.com>
* Revert "fix licensing and attribution in yumdnf module_util"
This reverts commit 59e11de5a2a6efa17ac3f0076bb162348c02e1bd.
* move fetch_rpm_from_url out of yumdnf module_util
Signed-off-by: Adam Miller <admiller@redhat.com>
* fix the move of fetch_rpm_from_url
Signed-off-by: Adam Miller <admiller@redhat.com>
Make git module support --separate-git-dir option. When git version is higher than 1.7.5, use built-in --separate-git-dir option during the clone. When lower, adjust the location of git dir manually after clone to achieve the same effect.
The inventory plugin api grew a self.cache that wasn't there when we
first wrote it. There's also a need to pull in the documentation
fragments so that we have the cache parameters.
Due to blank line returned from vCenter, wrong values were appended
to NTP server list. This fix adds filter for such blank values of NTP servers.
Fixes: #44183
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
Grammar on the description for option 'list' was grammatically incorrect. Also suggest to add wording that clarifies that 'list' is indeed Access-Based Enumeration.
+label: docsite_pr
* Add note about adding new key requiring update
When a new repo and new key are added, attempts to install packages
signed by that key fail until `apt-get update` is run. This note
is an attempt to help users avoid getting errors when they miss
this step.
* related to issue #25091
* switch example to apt module
* Compress src interface into one key
* Modified regex to support varied interface types
* Fixed documentation
* Unpacking return values from splitting method
- support config operations for EXOS-based platforms
- add regex to detect command failure responses
- add exos action plugin for "backup" operation
- add unit tests for exos_command (currently 94% coverage of
exos_config.py)
* Add backup option
* Only backup shadow file when the OS has one
* Only backup shadow file for SunOS
* Update docs on backup feature
* Add changelog fragment
* Add tests for shadow backup
* Remove backup option, make it automatic
Remove the option to enable/disable backups and make it automatic. Add note to docs describing this behavior.
Change tests to account for new module behavior.
Change section name in changelog fragment since minor_features is not a valid section.
NOTE:
1. use os.open() with os.O_CREAT|os.O_EXCL to check existence
and create a lock file if not exists, it's an atomic operation
2. the fastest process will create the lock file and others will
wait until the lock file is removed
3. after the writer finished writing to the password file, all the reading
operations use built-in open so processes can read the file parallel
* strip additional comments from /etc/default/passwd
Strip trailling comments from /etc/default/passwd like
MINWEEKS=1 #MINWEEKS=2
MAXWEEKS=12 # MAXWEEKS=8
Which otherwise cause failures with "failed to read /etc/default/passwd: too many values to unpack"
* fix carriage return typo in commit
* yet another typo in commit
* Fix indent problem
* add changelog fragment for PR 43931
Ideally I would have liked to compare the TTL as part of the
prerequisite check. Sadly that isn't supported by the RFC 2136 update
protocol. Hence the additional query.
Resolves#39465
* Update cloudflare_dns account link
* Add SSHFP and TLSA records to cloudflare_dns module
These are record types which Cloudflare recently added support
for. They both go well together with DNSSEC.
Technically it's a bit of a simplification to use the hash_type
parameter for TLSA records. Yet, it fits with all the real world usage
I have seen, and it keeps the module from sprawling too much.
Related to #43803
* Update netconf plugins for junos and iosxr
Fixes#39160
* Update api signature for netcon api's
from variable arguments to named arguments
* Udpate get default rpc supported
* Fix CI issue
* restore task arg splatting
* reverts #41804
* supersedes #41295
* fixes#42192
* after lots of discussion amongst the core team, we decided to preserve this feature, clarify the runtime warnings/docs, and prioritize a path toward fixing the underlying behavior that causes this feature to be insecure (un-namespaced facts).
* update faq text
note that warning is disabled when inject_facts_as_vars is
* wordsmithing FAQ entry
As of today, self.returns it not the source of truth. If the return
value from querying the resource contains more values than the one
listed in self.returns, those value will be returned even though not
explicitly specified in self.returns.
This commit ensures that only the values listed on self.returns are
actually returned. The other values not listed are supressed.
Every scaleway modules will require the same base of parameters. Instead
of documenting it each and every time, we build a doc fragment that will
allow one to simply extend documentation for every new module.
extends_documentation_fragment: scaleway
During the installing of packages if yum runs out of free disk space,
some post install scripts could fail (like e.g. when the kernel package
generates initramfs), but yum would still exit with a status 0. This is
bad, especially for the kernel package, because it makes it unable to
boot. Because the yum module is usually used for automation, which
means the users cannot read every message yum prints, it's better that
the yum module fails if it detects that there is no free space on the
disk.
* Common Rest Module using httpapi transport
* comparing json objects
* platform independant Rest Api
* FTD rest module
* Remove FTD module which will be committed later from cisco team
* remove debug code
* remove common rest module
* fix shippable errors
* Add notification users
* more shipable errors
* 29891 use os.path.realpath to follow keyfile symlinks
* 29891 add parameter follow
* updated changelog fragment
* add documentation and set default to false
* pip: combine chdir and env only when env is set
This fixes an AttributeError when chdir without virtualenv is specified:
File "/tmp/ansible_2UAFsZ/ansible_module_pip.py", line 387, in main
env = os.path.join(chdir, env)
File "/usr/lib64/python2.7/posixpath.py", line 75, in join
if b.startswith('/'):
AttributeError: 'NoneType' object has no attribute 'startswith'
* Add test for pip with chdir
Signed-off-by: Till Maas <opensource@till.name>
* Only template values in vars_prompt rather than all vars
This allows the use of variables in vars_prompt fields but allows variables entered in the prompt to affect play vars rather than throwing an undefined error.
Only post validate if there was a vars_prompt
* Add tests for vars_prompt
* Check the password format
Check the password format and notify user if they
input unencrypted password.
* Fix sanity error
* Add integration test
* Missed a task name
* Hard code the testing password
Since some testing platfrom has no passlib installed
* Add changelog fragment
* Rework some English sentences
* Fix a grammar mistake
The Vultr API is inconsistent in the type of the value it returns
based on the resources. While most of the time it will be a dict, for
some resources it will be a list (/v1/user/list, /v1/block/list).
query_resource_by_key() fails if the return value isn't a dict (.items()
does not exist on list). This patch aims to support both list and dict.
* Hold httpapi response in BytesIO
* Let httpapi plugin deal with HTTP codes if it wants
* Python 3.5 won't json.loads() bytes
* Don't modify headers passed to send
* Move code handling back to send()
but let httpapi plugin have a say on how it happens
The bundled selectors library which is used by the local and ssh
connection plugins had a bug which caused a traceback in a cornercase.
If selectors were in use and a syscall was interrupted, selectors would
attempt to restart the syscall after the interrupt was processed. if
the attempt determined that the timeout for running the syscall had
already expired, the code attempted to raise OSError. The raise was
using a Python3-ism and needed to be ported to work on Python2.
Fixes#41630
* Fix cli_command junos test failure and update doc
* Fix cli_command module integration test failure
for junos
* Update cli_command module doc for prompt and
config command run scenario's
* Update cli_command module doc
* Collecting PEM -> DER conversions.
* Using cryptography instead of OpenSSL binary in some situations.
* Moving key-to-disk writing for key content to parse_account_key.
* Rename parse_account_key -> parse_key.
* Move OpenSSL specific code for key parsing and request signing into global functions.
* Also using cryptography for key parsing and request signing.
* Remove assert statements.
* Fixing handling of key contents for cryptography code path.
* Allow to disable the use of cryptography.
* Updating documentation.
* 1.5 seems to work as well (earlier versions don't have EC sign function). Making Python 2.x adjustments.
* Changing option to select_crypto_backend.
* Python 2.6 compatibility.
* Trying to test both backends separately for acme_account.
* Also testing both backends separately for acme_certificate and acme_certificate_revoke.
* Adding changelog entry which informs about select_crypto_backend option in case autodetect fails.
* Fixing YAML.
Fixes#42310
Previously, the firewalld module was making a call to
FirewallClientConfig.getZoneNames() which doesn't exist in versions
of firwalld older than 0.4.2, this patch implements the same logic
with older API calls to not require a newer version of firewalld.
Signed-off-by: Adam Miller <admiller@redhat.com>
In query_resource_by_key(), there is an equal comparison that is made to
know if the object we are looking for is present. Due to type difference
this comparison doesn't always retrieve true, even when it should.
This is due to the fact that the value in r_data dict are of type
unicode, while the other can be of type int, float,... .
```
>>> a = u'1'
>>> type(a)
<type 'unicode'>
>>> b = 1
>>> type(b)
<type 'int'>
>>> a == b
False
>>> str(a) == str(b)
True
```
Hence the values, for comparison purposes, are casted into strings.
* Merge again trickily similar Accelerated networking and IP forwarding
* Add type to enable_ip_forwarding documentation
* Fix merge error
* auth to auto
* azure_rm_networkinterface: remove auth_source from tests
* azure_rm_networkinterface: remove spurious auth_source from test
* azure_rm_networkinterface: Revert formatting on test
* azure_rm_networkinterface: Correct indentation
_parsed_return_data should only be used with the return from a module.
This location was invoking a remote shell command rather than a module
so we don't want it here.
they dropped the Linux so now it only shows as ALT, it should still be backwards compatible
pkg_mgr detection relies on `Altlinux` string, so properly setting os_distribution should take care of it as side effect
fixes#43539
* Remove use of simplejson throughout code base. Fixes#42761
* Address failing tests
* Remove simplejson from contrib and other outlying files
* Add changelog fragment for simplejson removal
* Change how data is sent to the persistent connection socket.
We can't rely on readline(), so send the size of the data first. We can
then read that many bytes from the stream on the recieving end.
* Set pty to noncanonical mode before sending
* Now that we send data length, we don't need a sentinel anymore
* Copy socket changes to persistent, too
* Use os.write instead of fdopen()ing and using that.
* Follow pickle with sha1sum of pickle
* Swap order of vars and init being passed to ansible-connection
* New module for managing EMC VNX Block storage
With the module emc_vnx_sg_member users can add or remove luns from
existing storage groups.
This module has been developed in couple with emc_vnx_mv_promote for
disaster recovery process automation, but can be used by itself.
This fix adds additional parameter 'datastore'. This parameter
provides a flexibility to specify custom datastore or datastore cluster
to deploy new virtual machine from template (which is located in different
datastore or datastore cluster from virtual machine's datastore or datastore
cluster).
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Remove wait_for & associated params
* Upgrade command dict to top-level, remove more wait_for accessories
* We don't need all this anymore
* Update docs
* Update tests to new argspec
* Be a little more explicit about sendonly
Also remove reference to the word provider.
* Add example of prompt and answer
This is to avoid users connecting to the APIC using SSH, which is likely
to fail. In the ACI documentation (linked from every module) we go into
more details on how people are supposed to work with the modules..
* Changing Lenovo Inc to Lenovo and update License file to be consistent.
* Moving code in util file to module file. This is done as per a review comment
* Update cnos_vlag.py
* Update cnos_vlan.py
* Update enos_config.py
Add exos_facts module. Known limitations at this time include:
- Interface MTU is not reported.
- Only primary interface IP is reported.
Add basic unit tests for the exos_facts module.
An EXOS CLI prompt can be prefixed with '! ' (shutting down), '* '
(running configuration does not match saved configuration), and
can include various status tokens within parentheses after these
prefixes. Update prompt regex to accept valid CLI prompts.
* Unified examples in all modules
* validate_certs is now 'no' instead of 'False'
* delegate_to changes
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* If the remote host supports session
capability set the `supports_generate_diff`
flag to false which identifies if config diff should
be generated within module or not
This functionality was not considered when the module was written, but
there's no reason why it shouldn't be supported.
We had to rework the query string construction and object filtering.
This new functionality allows to filter on arbitrary keys and supports
None values.
This PR fixes various issues with the existing framework, including
querying specific objects using construct_url_4 (i.e.
aci_epg_to_contract and aci_static_binding_to_epg)
Vultr API is being inconsisten in what it returns. An empty list when no
resources exists, but a dict of dict when they do. The case needs to be
handled so the module do not fail. An extra test has been added.
* Clarifications of parameters in yum_repo module
Added a note defining where the "name" parameter of the module will appear in the repo file and note explaining that the description parameter of the module is actually the name parameter in the repo file. It might help people transform their existing yum repository files in ansible managed repos.
If there are multiple distributed virtual portgroup network with same name
in different datacenter, vmware_guest module used to choose first DVPG irrespective
of the datacenter. This caused problem if two datacenter has same name for DVPG,
vmware_guest module failed with error "The object or item referred to could not be found."
This fix adds check to search for network (Distributed Virtual Portgroup)
till datacenter level. This avoids selection of same name DVPG from other datacenter.
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
vmware_drs_rule_facts was missing details about vm_group and host_group
and their respective memeber names. This fix adds those details and updates documentation.
Fixes: #42980
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Added support for TLS-ALPN-01 verification.
* Unrelated commit to re-trigger tests.
* Added test for TLS-ALPN-01.
* Try to remove to_bytes in the hope that binary data survives in Python 2.
* Using Base64 encoding for TLS-ALPN-01 value.
delegate_to parameter in task only accepts string,
this fix will error out if other datatypes are provided instead of
string.
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
Only print warning when ansible.cfg is actually skipped
* Also add unittests for the find_ini_config_file function
* Add documentation on world writable current working directory
config files can no longer be loaded from a world writable current
working directory but the end user is allowed to specify that
explicitly. Give appropriate warnings and information on how.
Fixes#42388
* Refactoring to persistence connection BGP, factory, reload, save, showrun modules
* Refactoring methods from Util to module file
* Removing BGP Utility methods
* Adding to errors that need to be ignored
* Allow for the specification of a rhsm_repo_ca_cert if changing baseurl
If changing the baseurl we should allow for a ca cert to be updated from redhat-uep.pem
* Fixing documentation section
* added version to option rhsm_repo_ca_cert
* got rid of extra CR
* Added changes for Issue #38828, adds scope paramater to systemd module
* Removed description for old paramater
* Added version_added field for new option
* Readded the user paramater as a deprecated paramater
* Changed version for the scope paramater since I missed the release window
* Implement signed_request for sigV4 requests
* Correct linting errors
* More linting changes. Correct import.
* Final linting fix for inline comments
* Correct import of urllib.parse
* Update copyright and shebang line
* Remove shebang
* Put boto3 requirement. Abtract out get_aws_key_pair for module consumption.
* Dummy out unused region variable.
* Handle Boto3 ImportError
* - implement get_aws_credentials_object with willthames suggestion
- Handle session_token
* Make quote style consistant
* Chop arugment line up
* Correct indent
* Support for postgresql default privileges
fix the following issues:
* #29701
* #23657
* The ALTER DEFAULT PRIVILEGES is implemented with type 'default_privs'
* Added a Query Builder for simplification
* Some minor lint
* Fixed Lint Issue in doc
Fixed misspelled method name
* Removed the damned empty space on line 243 ! (within the doc) x|
* Kept Compat in string interpolation for old beloved python 2.6
According to the do_encrypt interface, encrypt arg should be the hash method name used for encrypting returning password. But in the doc and lookup code it's a boolean flag, correct it to string.
* tower_* modules: move HAS_TOWER_CLI in TowerModule
Besides this change allows to define other common parameters such as
mutually_exclusive.
* tower_*: config file can not be used with auth params
* tower module_utils: remove useless call to expanduser
'path' type: expanduser & expandvars are automatically called
From terraform documentation:
```
The persistent data stored in the backend belongs to a workspace. Initially the backend has only one workspace, called "default", and thus there is only one Terraform state associated with that configuration.
Certain backends support multiple named workspaces, allowing multiple states to be associated with a single configuration. The configuration still has only one backend, but multiple distinct instances of that configuration to be deployed without configuring a new backend or changing authentication credentials.
```
This patch introduces the `workspace` parameter in the terraform module. The module will select
the workspace is it does not exists, or simply select it if it exists.
Fixes#43134
Add 'purge_workspace' parameter and handle the workspace context
The `purge_workspace` parameter allows to remove a workspace when asking for state = absent.
It allows to leave a clean state file without empty workspaces if the parameter is true.
Also adding the support of a workspace context that allows to restore the workspace
when that was active when the module started.
The existing rule priority comes from aws as a string. It is then
compared to the new rule priority, which is defined as an int. This change
casts the new rule priority as a string making the comparison work. The
reason to cast it as a string rather than an int is used because a priority
can also be set to 'default'. When trying to case 'default' as an int, it creates
an error.
* Raise exception if command timeout is triggered
Fixes#43076
If persistent connection timeout is triggered, riase
exception which will be send over socket to module code
instead of silently shutting down the socket.
* Fix CI failure
* Fix review comment
* Fix CI failure
* Fix review comment
* Fix review comment
If there were fatal bugs in this portion of config, they would never be displayed
because config would fail to load and then every^U (Exageration... only
half of every) other part of the code which depended on config to be
loaded would fail before we ever got around to a section of code that
would process UNABLE.
Remove the try except from here so that we are able to debug this code
On Python3, these would be text strings already. On Python2, we need to
convert them from bytes.
Use a new helper function py3compat to do this.
Fixes#43207
* remove leading dot in efs_facts mountpoint
* remove leading dot in efs_facts mountpoint
* remove leading dot in efs.py
* introduce filesystem_address var in efs* modules and revert changes to mount_point
* fixes issue 42420
* fixes issue 42420
* fix shippable docs error
* shippable fix and test case add
* shippable fix and test case add
* shippable fix and test case add
* shippable fix
* removing extra assert
* shippable fix
Some users have problems using the VMware modules because they use the
vCenter as target, and Ansible uses SSH to connect to the targets.
Eventually we need to update the VMware guide to explain how the modules
work, but the first fix is to update the examples.
(We should backport to v2.6 and v2.5 too)
* new nios module support
* new nios module support
* new nios module support
* new nios module support
* new nios module support
* new nios module support
* new nios module support
* new nios module integration test support
* new nios module integration test support
* new nios module integration test support
* new nios module integration test support
* new nios module integration test support
* new nios module integration test support
* new nios module integration test support
* new nios module integration test support
* new nios module integration test support
* new nios module integration test support
* new nios module integration test support
* new nios module integration test support
* new nios module integration test support
* new nios module integration test support
* new nios module integration test support
* new nios module integration test support
* new nios module integration test support
* new nios module integration test support
* new nios module integration test support
* new nios module integration test support
* new nios module integration test support
* new nios module integration test support
* new nios module integration test support
* new nios module integration test support
* test/integration/targets/nios_naptr_record/tasks/nios_naptr_record_idempotence.yml
new nios module integration test support
* fix pep8 error
* fix pep8 error
* adding newline at end
* adding newline at end
* adding newline at end
* adding newline at end
* adding newline at end
* adding newline at end
* adding newline at end
* adding newline at end
* adding newline at end
* adding newline at end
* adding newline at end
* adding newline at end
* adding newline at end
* adding newline at end
* New module request: azure_rm_virtualmachine_facts #38081
* New module request: azure_rm_virtualmachine_facts #38081#38279 pep8 fixes
* New module request: azure_rm_virtualmachine_facts #38081#38279 validate-modules fixes
* New module request: azure_rm_virtualmachine_facts #38081#38279 serialize_vm
* New module request: azure_rm_virtualmachine_facts #38081#38279 get_item
* New module request: azure_rm_virtualmachine_facts #38081#38279 avoid get vm twice
* New module request: azure_rm_virtualmachine_facts #38081#38279 some jborean93 requests
* New module request: azure_rm_virtualmachine_facts #38081#38279 camel_dict_to_snake_dict
* New module request: azure_rm_virtualmachine_facts #38081#38279 integration test
* New module request: azure_rm_virtualmachine_facts #38081#38279 virtual network required
* New module request: azure_rm_virtualmachine_facts #38081#38279 consider additional vms present
* New module request: azure_rm_virtualmachine_facts #38081#38279 trailing comma
* New module request: azure_rm_virtualmachine_facts #38081#38279 remove from smoketest
* New module request: azure_rm_virtualmachine_facts #38081#38279 filtering by tag fix
* New module request: azure_rm_virtualmachine_facts #38081#38279 virtual network issues fix
* New module request: azure_rm_virtualmachine_facts #38081#38279 remove trailing comma
* adding curated format for vm
* New module request: azure_rm_virtualmachine_facts #38081#38279 rights to zim + lint fixes
* clean up
* updates to vm facts
* commented out failing thing
* fixed mistake
* New module request: azure_rm_virtualmachine_facts #38081
* New module request: azure_rm_virtualmachine_facts #38081#38279 pep8 fixes
* New module request: azure_rm_virtualmachine_facts #38081#38279 validate-modules fixes
* fixed test
* fixed test problem
* New module request: azure_rm_virtualmachine_facts #38081#38279 serialize_vm
* New module request: azure_rm_virtualmachine_facts #38081#38279 get_item
* New module request: azure_rm_virtualmachine_facts #38081#38279 avoid get vm twice
* New module request: azure_rm_virtualmachine_facts #38081#38279 some jborean93 requests
* New module request: azure_rm_virtualmachine_facts #38081#38279 camel_dict_to_snake_dict
* New module request: azure_rm_virtualmachine_facts #38081#38279 integration test
* New module request: azure_rm_virtualmachine_facts #38081#38279 virtual network required
* New module request: azure_rm_virtualmachine_facts #38081#38279 consider additional vms present
* New module request: azure_rm_virtualmachine_facts #38081#38279 trailing comma
* New module request: azure_rm_virtualmachine_facts #38081#38279 remove from smoketest
* New module request: azure_rm_virtualmachine_facts #38081#38279 filtering by tag fix
* New module request: azure_rm_virtualmachine_facts #38081#38279 virtual network issues fix
* New module request: azure_rm_virtualmachine_facts #38081#38279 remove trailing comma
* adding curated format for vm
* New module request: azure_rm_virtualmachine_facts #38081#38279 rights to zim + lint fixes
* clean up
* updates to vm facts
* commented out failing thing
* fixed mistake
* fixed test
* fixed test problem
* ldap_entry 'Tuple_to_LDAPMod(): expected a byte string in the list' issue
* Revert "ldap_entry 'Tuple_to_LDAPMod(): expected a byte string in the list' issue"
This reverts commit efe316c52e5a70fc1aa9f58eff3a9d5b2599763f.
* changed return value
* fixed test
* fixed test mistake
* one space too much
* removed change made by mistake
* virtual machine description
* remove example
* fixed yaml
* actually check we can run scm command for roles
* a better error message than file not found
* more narrow exception hanlding
* refactor common functions for more extended use and further 'basic.py' separation
Some distribtuions like SUSE has the rc%.d directories under /etc/init.d
Quote of /etc/rc.d.README on SLES11.
"Some people expect the system startup scripts in /etc/rc.d/.
We use a slightly different structure for better LSB compliance."
* Use https:// for docs.aws.amazon.com in aws_s3 module
* Support Amazon S3 Dual-Stack Endpoints in aws_module
The default S3 endpoint only resolves to IPv4 addresses. By enabling
the dual-stack endpoint IPv6 too get added as an option.
* refactored from procedural to OOP
* updated ongoing maintenance windows to PagerDuty REST API v2
* update create maintenance windows to PagerDuty REST API v2
* update absent maintenance windows to PagerDuty REST API v2
* update pager alert module to PagerDuty REST API v2
* removed basic HTTP authorization
updated parameter description and examples
* fix failed sanity checks
* revised documentation according to review
* make obsolete service key parameter an alias to a new integration key parameter
Add back comma for required_one_of argument as it's
supposed to be an iterable of iterables.
PR #39787 by @Akasurde
Fixes: #39786
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Enable setting setting cliconf plugin options
Fixes#43367
* Add support to set configuration options for implementation plugins (eg: cliconf)
from `ansible-connection`
* Fix CI failure
* Add Ansible.ModuleUtils.PrivilegeUtil and converted code to use it
* Changed namespace and class to be a better standard and fixed some typos
* Changes from review
* changes to avoid out of bound mem of server 2008
* changes to detect failure when setting a privileged not allowed
* Convert to AnsibleAWSModule and support IAM permission boundaries
* Handle adding boundary to existing role that lacks one
* Properly clean up role boundary associations on delete
* Handle case when policy boundary is `""` but does not exist
While creating/reconfiguring vSwitch without NICs check if nics details
are gathered or not.
Fixes: #42619
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
This fix adds additional details of vswitch and dvswitch and their
respective nics used.
Fixes: #43009
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Implement initial RouterOS support
* Correct matchers for license prompts
* Documentation updates & mild refactor
* Remove one last Cisco function
* Sanity test fixes
* Move imports to the beginning
* Remove authorize property
* Handle ANSI codes
* Revert to_lines function
* CR fixes
* test(routeros): add unit tests
* Added another test (with ANSI colors and banner in fixture).
* Ignore CRLF line endings in system_package_print file
* fix: review by ganeshrn
* Changed Foreman timeout to be setable via a parameter
Added a Parameter to set the timout to wait for the started Foreman actions
by the user instead of using the hard coded 1000 Seconds
* katello module screamed for more docu :)
* fix docu + some ci findings
made docu better and moved chices in relations to other options to the description
* added a quote to description and removed wrong combination of param product
* Removed choices from params
also removed katello from a ignore file
* NXAPI ssl ciphers & protocols default values
* TLSv1, TLSv1.1, TLSv1.2 and weak cipher support
* NXOS NXAPI weak/strong cipher & TLSv 1.2, 1.1 & 1.0 support
* Version checking for strong/weak ciphers & TLS 1.2, 1.1 & 1.0 support
* Cleaned up erroneously committed changes.
* Specific NXOS platform checking for nxapi ssl ciphers & protocols
* Fixed ansibot reported errors.
* Resolved ansibot reported error.
* Added network_os_version to mocked up N7K unit test device_info
* Calling get_capabilities() once in main and passing results into methods.
* Removed raising exceptions when platform capabilities return None
per reviewers request. Skipping nxapi ssl options when capabilities
are None and generating a warning when these options are skipped
* Cleaned up explicit checks for None/not None
* Add new module for Redfish APIs
Communicates with Out-Of-Band Controller through Redfish APIs
Module gathers hardware information and sends back
* Removed unused library imports
* Removed token entry from headers
* Made 'command' optional and defined default value for each 'category'
* Replace 'result' with 'ansible_facts' for returned dict variable
* Removed unused variable definitions and library imports
* Renamed dicts where data is returned.
Should make it easier to sort through returned data that is placed
in one file.
* Defined dicts to specify available categories and commands in each one.
- Allows specifying default command for each category
- Allows specifying all commands for each category
- Removed Inventory category and moved commands to System category
- Renamed dicts where data is returned to allow to dump more than one in a file
* Remove choice[] since it's redundant
* Added flexibility when specifying categories
- If a category is not specified, it sets a default value
- Can handle more than one category
- Will accept value "all" for category which will set to all available
- Renamed category System to Systems to better reflect Redfish API
* Defined default category in a variable
* Made category argument a list
* Added examples
* Made command argument a list
* Replaced 'ansible_facts' with 'redfish_facts' for returned dict variable.
* Added default value for category in documentation
* Moving redfish_facts inside ansible_facts
* Updated how results dicts are constructed, where applicable
* Improved error messages
* Removed unused variables
* Undo commit 66a7dcd789726913bdb7a25e59cc3aa2125db95d due to variable 'e' oversight
* CNOS Vlag module is refactored to use persistence connection instead of paramiko.
* Changing interface and port channel modules to persistent connection and adding UT for them.
* Fixing pep8 issues
* Removing trailing new line
* Removing trailing new line
* Removing trailing new line
* Correcting indentation mistake
* Update cnos_vlag.py
* Removing commented examples
They are commented because those configurations are not meant for L2 ports
VSAN related facts (cluster_uuid) will be used in vmware_vsan_cluster
while adding new host in VSAN cluster.
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* nxos cliconf plugin refactor
Fixes#39056
* Refactor nxos cliconf plugin as per new api definition
* Minor changes in ios, eos, vyos cliconf plugin
* Change nxos httpapi plugin edit_config method to be in sync with
nxos cliconf edit_config
* Fix CI failure
* Fix unit test failure and review comment
Now that we don't need to worry about python-2.4 and 2.5, we can make
some improvements to the way AnsiballZ handles modules.
* Change AnsiballZ wrapper to use import to invoke the module
We need the module to think of itself as a script because it could be
coded as:
main()
or as:
if __name__ == '__main__':
main()
Or even as:
if __name__ == '__main__':
random_function_name()
A script will invoke all of those. Prior to this change, we invoked
a second Python interpreter on the module so that it really was
a script. However, this means that we have to run python twice (once
for the AnsiballZ wrapper and once for the module). This change makes
the module think that it is a script (because __name__ in the module ==
'__main__') but it's actually being invoked by us importing the module
code.
There's three ways we've come up to do this.
* The most elegant is to use zipimporter and tell the import mechanism
that the module being loaded is __main__:
* 5959f11c9d/lib/ansible/executor/module_common.py (L175)
* zipimporter is nice because we do not have to extract the module from
the zip file and save it to the disk when we do that. The import
machinery does it all for us.
* The drawback is that modules do not have a __file__ which points
to a real file when they do this. Modules could be using __file__
to for a variety of reasons, most of those probably have
replacements (the most common one is to find a writable directory
for temporary files. AnsibleModule.tmpdir should be used instead)
We can monkeypatch __file__ in fom AnsibleModule initialization
but that's kind of gross. There's no way I can see to do this
from the wrapper.
* Next, there's imp.load_module():
* https://github.com/abadger/ansible/blob/340edf7489/lib/ansible/executor/module_common.py#L151
* imp has the nice property of allowing us to set __name__ to
__main__ without changing the name of the file itself
* We also don't have to do anything special to set __file__ for
backwards compatibility (although the reason for that is the
drawback):
* Its drawback is that it requires the file to exist on disk so we
have to explicitly extract it from the zipfile and save it to
a temporary file
* The last choice is to use exec to execute the module:
* https://github.com/abadger/ansible/blob/f47a4ccc76/lib/ansible/executor/module_common.py#L175
* The code we would have to maintain for this looks pretty clean.
In the wrapper we create a ModuleType, set __file__ on it, read
the module's contents in from the zip file and then exec it.
* Drawbacks: We still have to explicitly extract the file's contents
from the zip archive instead of letting python's import mechanism
handle it.
* Exec also has hidden performance issues and breaks certain
assumptions that modules could be making about their own code:
http://lucumr.pocoo.org/2011/2/1/exec-in-python/
Our plan is to use imp.load_module() for now, deprecate the use of
__file__ in modules, and switch to zipimport once the deprecation
period for __file__ is over (without monkeypatching a fake __file__ in
via AnsibleModule).
* Rename the name of the AnsiBallZ wrapped module
This makes it obvious that the wrapped module isn't the module file that
we distribute. It's part of trying to mitigate the fact that the module
is now named __main)).py in tracebacks.
* Shield all wrapper symbols inside of a function
With the new import code, all symbols in the wrapper become visible in
the module. To mitigate the chance of collisions, move most symbols
into a toplevel function. The only symbols left in the global namespace
are now _ANSIBALLZ_WRAPPER and _ansiballz_main.
revised porting guide entry
Integrate code coverage collection into AnsiballZ.
ci_coverage
ci_complete
* uri: Avoid exception in common scenario
So I was confused by the fact that the **uri** module, when not
returning an acceptable HTTP status code, returns:
The full traceback is:
File "/tmp/ansible_UQwiI4/ansible_module_uri.py", line 471, in main
uresp['location'] = absolute_location(url, uresp['location'])
While the actual error was:
Status code was 400 and not [201]: HTTP Error 400:
I also wonder why that message ends abruptly. I would have expected
`HTTP Error 400: Bad Request` which would be more useful.
* uri: Avoid false positive tracebacks in fail_json() on PY2
One of the earlier implementation of unified temp for 2.4 passed the
temp diretory to the remote side using this environment variable. We
later changed it to be passed via a module parameter but forgot to
remove the environment variable.
* fix fedora version dnf fact, default pkg_mgr detection per distro family
* loop over possible dnf/yum paths in case there are multiple canonical sources later in life
Signed-off-by: Adam Miller <admiller@redhat.com>
* Support multi-doc yaml in the from_yaml filter
* Most automatic method of handling multidoc
* Only use safe_load_all
* Implement separate filter
* Update plugin docs and changelog
Allow specifying the source and destination files' encodings in the template module
* Added output_encoding to the template module, default to utf-8
* Added documentation for the new variables
* Leveraged the encoding argument on to_text() and to_bytes() to keep the implementation as simple as possible
* Added integration tests with files in utf-8 and windows-1252 encodings, testing all combinations
* fix bad smell test by excluding windows-1252 files from the utf8 checks
* fix bad smell test by excluding valid files from the smart quote test
* Only add exception/traceback on Python 3
On Python 2 the traceback could be any exception from the stack frame
and likely unrelated to the fail_json call.
On Python 3 the traceback is cleared outside any exception frame, so the
call always returns the most inner traceback (if any), and therefor is
most likely related to the fail_json call.
* Add uncertainty to traceback on Python 2
On Python 2 the last exception in the stack frame is being returned,
this could be unrelated to the actual error, especially if fail_json()
is called outside an except: block.
* Add parameter to keep elb rules
Does not purge elb rules. This is usefull if running the elb_application_lb
role and there is the desire to keep existing rules.
* Change variable name keep_rules to purge_rules
The descriptor purge has been used in the past.
* Changed default for purge_rules
Default is purge_rules. This is how the module has functioned previously. This change maintains
the previous behavior.
* Add integration test for purge_rules flag
* Change wording of test task
* Fix merge conflcit
* Changed default for purge_rules
Default is purge_rules. This is how the module has functioned previously. This change maintains
the previous behavior.
* merge conflcit
* Change wording of test task
* Add purge_rules option to test
* Change test description wording
* Expand purge_rules documentation
* Clarifies documentation for purge_rules option
* Documentation change for resizefs
Changed documentation to match the default value of resizefs set in the code.
Added a note on the resizefs use on the example utilizing it.
* Remove test now it validates fine
This provides a more convenient way for testing (async) jobs.
When used with a non-async job it will report a warning so the user is
aware that he may be doing something incorrect.
Since the 'finished' result value is an integer (!), the test is turning
this in a proper boolean.
* cobbler_system: New module to manage Cobbler systems
This module is useful to provision new systems using Cobbler and Ansible.
* cobbler_system: warn on invalid properties
This fix checks if dirname is not equal to '' before proceeding
to create actual directory with name.
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* The JSONDecodeError exception only exists in Python 3.
* Without a properly parsed JSON response there is no more error
processing to be done, no matter the http response code.
Relates to #38178
* Detect failed sysvinit module
- This checks the stderr instead of the rc to detect whether the
sysvinit module was successful or not, as even when failing, the
rc would be 0.
- It immediatly became obvious that the debug info when failing
was far too little to properly debug the role. To improve this,
I also added the rc, stderr and stdout to the debug output.
* Revert stderr check to rc check, rename out->stdout, err->stderr
* win_user: use different method to validate credentials that does not rely on SMB/RPC
* Use Add-Type as SetLastError on .net reflection not working on 2012 R2
* win_chocolatey: refactor module to fix bugs and add new features
* Fix some typos and only emit install warning not in check mode
* Fixes when testing out installing chocolatey from a server
* Added changelog fragment
* Enable check_mode in command module
This only works if supplying creates or removes since it needs
something to base the heuristic off. If none are supplied it will just
skip as usual.
Fixes#15828
* Add documentation for new check_mode behavior
* ec2.py:
* source_dest_check default value is now None, updated docs
* Refactor restart_instances and startstop_instances -> Two new functions to prevent repetition: check_source_dest_attr and check_termination_protection
* Properly handle default package manager vs apt
For distros where apt might be installed but is not the default
package manager for the distro, properly identify the default distro
package manager during fact finding and re-use fact finding from
DistributionFactCollector and instead of reimplementing small
portions of it in PkgMgrFactCollector
Add unit test to always check the apt + Fedora combination to test
the new code.
Fixes#34014
Signed-off-by: Adam Miller <admiller@redhat.com>
* remove q debugging output I accidentally left behind
Signed-off-by: Adam Miller <admiller@redhat.com>
* add os_family to the conditional so we're only hitting that code path when needed
Signed-off-by: Adam Miller <admiller@redhat.com>
* setup for a _check* pattern for general os_family group pkg_mgr checking
Signed-off-by: Adam Miller <admiller@redhat.com>
* use Mock.patch decorator for os.path.exists in TestPkgMgrFactsAptFedora
Signed-off-by: Adam Miller <admiller@redhat.com>
Allows patching of custom Kubernetes resources that
don't support strategic merge patching
Check that openshift module supports content_type param
(requires version newer than 0.6.0)
* Update dnsimple-python minimum version to 1.0.0 as it supports API v2 and API v1 is deprecated.
* Update examples.
* Update documentation.
Fixes: #42495
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
This commit introduces a new module called vr_startup_script_facts.
This module aims to return the list of startup scripts avaiable
avaiable in Vultr.
Sample available here:
```
"vultr_startup_script_facts": [
{
"date_created": "2018-07-19 08:52:55",
"date_modified": "2018-07-19 08:52:55",
"id": 327140,
"name": "myteststartupscript",
"script": "#!/bin/bash\necho Hello World > /root/hello",
"type": "boot"
}
]
```
* Add src parameter to elasticsearch_plugin
Previously specifying a URL or a file name (which is supported by the
Elasticsearch plugin tooling) would not work correctly with Ansible, because the
detection of the current installation state did not handle this well.
This commit adds a new "src" parameter for the module, which can be specified in
addition to the plugin name. It will be used to retrieve the plugin from
a custom location while keeping the final plugin name available to determine if
it is already present or not.
The url parameter remains for ES 1.x compatiblity.
* Fix sanity test errors
* Add version_added for src option
* Increase first added version to 2.7
* Update nclu.py
Stop module from running `net` on empty commands.
* Update nclu.py
Updated the copyright date
* Update nclu.py
Returned metadata version to 1.1
* Update nclu.py
Fix indentation to be a multiple of 4.
* Create changelog fragment
linked_clone requires snapshot_src parameter. This fix makes them required_together
and update documentation. Also, testcase is added.
Fixes: #42349
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Support setting persistent command timeout per task basis
Fixes#42200
* Add variable `ansible_command_timeout` to `persistent_command_timeout`
option for `network_cli` and `netconf` connection plugin so that the
command_timeout can be set per task basis while using `connection=network_cli`
or `connection=netconf`
eg:
```
- name: run copy command
ios_command:
commands:
- show version
vars:
ansible_command_timeout: 40
```
* Modify `ansible-connection` to read command_timeout value from
connection plugin options.
* Add `ansible_command_timeout` to `persistent_command_timeout`
option in `persistent` to support `connection=local` so that
it is backward compatibilty
* To support `connection=local` pass the timeout value as variables
from persistent connection to `ansible-connection` instead of sending
it in playcontext
* Fix CI failure
* Fix review comment
* Check get_option method works with inventory plugins
This use case is already tested by some cloud inventoty plugin but
these tests are slow and aren't always executed, hence this new quick
test.
* AnsiblePlugin: Fix typo in docstring
* change infoblox_client to infobblox-client
* change infoblox_client to infobblox-client
* change infoblox_client to infobblox-client
* change infoblox_client to infobblox-client
* change infoblox_client to infobblox-client
* change infoblox_client to infobblox-client
* change infoblox_client to infobblox-client
* change infoblox_client to infobblox-client
* change infoblox_client to infobblox-client
* change infoblox_client to infobblox-client
* change infoblox_client to infobblox-client
* change infoblox_client to infobblox-client
* ios_user module - add sshkey support
* ios_user - Add version_added to sshkey option
* ios_user - pep8 indentation fixes in unit tests
* ios_user - use b64decode method that works on python 2 and 3
* Only report change when home directory is different
Add tests with home: parameter
Have to skip macOS for now since there is a bug when specifying the home directory path for an existing user that results in a module failure. That needs to be fixed in a separate PR.
Ensure that FieldLevelEncryptionId is properly handled - passing it if
set, and keeping it if returned by GetDistribution
Update cloudfront_distribution tests to remove references to
test_identifier so test suite actually works
Fixes#40724
<!--- Your description here -->
This change is intended to help users know that a win_wait_for module exists and should be used for working on Windows hosts, as the documentation gives the impression that this module works on Windows - but if tried, it produces a large amount of stderr output.
+label: docsite_pr
This commit adds a conditional inside the constructor so that if a user
didn't specified an image parameter all the code related to the image
version comparison is omitted.
This is extremely useful when a user want to just stop and start
containers using just the name, keeping everything as it is, without the
need of specifying all the image and command stuff used at creation.
Today if you don't specify the image you get an error, and this is a
confusing [1] behavior.
[1] https://github.com/ansible/ansible/issues/27960
* JM: allow choco to install 32 bit version
* JM: style corrections
* Revert style changes in lists
* JM: changing from boolean to string choice
* JM: updating example
* ucs_storage_profile module and integration tests
* Remove space in doc link to fix docs-build issue.
* Added suboption documentation and argument spec supporting list suboptions.
* Various small edits
This commit introduces a new module called vr_firewall_group_facts.
This module aims to return the list of firewall groups avaiable
avaiable in Vultr.
Sample available here:
```
"vultr_firewall_group_facts": [
{
"date_created": "2018-07-17 12:22:51",
"date_modified": "2018-07-17 12:24:47",
"description": "ansible-firewall-group",
"id": "fb5a0876",
"instance_count": 0,
"max_rule_count": 50,
"rule_count": 1
}
]
```
This commit introduces a new module called vr_dns_domain_facts.
This module aims to return the list of DNS domains avaiable avaiable in
Vultr.
Sample available here:
```
"vultr_dns_domain_facts": [
{
"date_created": "2018-07-19 07:31:14",
"domain": "ansibletest.com",
}
]
```
This commit introduces a new module called vr_user_facts.
This module aims to return the list of user avaiable avaiable in Vultr.
Sample available here:
```
"vultr_user_facts": [
{
"acls": [],
"api_enabled": "yes",
"email": "mytestuser@example.com",
"id": "a235b4f45e87f",
"name": "mytestuser"
}
]
```
* implementing disable_excludes
* add check for yum version
* limit choices
* add testcases for disable_exclude
* fix formating
* add documentation
* syntax fix for test case
* fix indentation
* need to ignore errors when we want to do a test that fails
* test disable_excludes with zip and not sos
* add tests for yum < 3.4 not supported
* fix formating
* centos 6.1 does not support map
* drop unsupported selectattr
* cleanup testcases
* fix test cases beloging to wrong test scenarion (propper when)
* evaluate expression
* minor test fixes
* check output of msg
* Add support for global IGMP configuration on onyx switches
Signed-off-by: Samer Deeb <samerd@mellanox.com>
* Add support for global IGMP configuration on onyx switches
Signed-off-by: Samer Deeb <samerd@mellanox.com>
* Changing Lenovo Inc to Lenovo and update License file to be consistent.
* Changing cnos_vlan from paramiko to persistence connection of Ansible. Also talking care of CLI changes in CNOS commands with backward compatibility.
* Fixing Validation issues
* Trailing lines removal
* Review comments of Gundalow are getting addressed. He mentioned only at one place for cnos.py. But I have covered the entire file.
* Changes to incorporate Review comments from Qalthos
* Removing configure terminal command from module code
* Aligning with change in run_cnos_commands method changes
* Editing cliconf for latest CNOS CLIs
* Delete all versions and deletemarkers in S3_Bucket when force parameter is passed
* Fix PEP8 style conformance
* Clarify explanation of force parameter
This commit introduces a new module called vr_plan_facts.
This module aims to return the list of plan avaiable avaiable to use on
booted servers.
Sample available here:
```
"vultr_plan_facts": [
{
"available_locations": [
1
],
"bandwidth": 40.0,
"bandwidth_gb": 40960,
"disk": 110,
"id": 118,
"name": "32768 MB RAM,110 GB SSD,40.00 TB BW",
"plan_type": "DEDICATED",
"price_per_month": 240.0,
"ram": 32768,
"vcpu_count": 8,
"windows": false
}
]
```
This commit introduces a new module called vr_os_facts.
This module aims to return the list of OSes avaiable avaiable to use to
boot servers.
Sample available here:
```
"vultr_os_facts": [
{
"arch": "i386",
"family": "ubuntu",
"id": 216,
"name": "Ubuntu 16.04 i386",
"windows": false
}
]
```
This commit introduces a new module called vr_region_facts.
This module aims to return the list of region avaiable avaiable to use
where boot servers.
Sample available here:
```
"vultr_region_facts": [
{
"block_storage": false,
"continent": "Europe",
"country": "FR",
"ddos_protection": true,
"id": 24,
"name": "Paris",
"regioncode": "CDG",
"state": ""
}
]
```
This commit introduces a new module called vr_sshkey_facts.
This module aims to return the list of SSH keys avaiable in Vultr.
Sample available here:
```
"vultr_sshkey_facts": [
{
"date_created": "2018-07-10 14:49:13",
"id": "5b43c760d7d84",
"name": "me@home",
"ssh_key": "ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQC+ZFQv3MyjtL1BMpSA0o0gIkzLVVC711rthT29hBNeORdNowQ7FSvVWUdAbTq00U7Xzak1ANIYLJyn+0r7olsdG4XEiUR0dqgC99kbT/QhY5mLe5lpl7JUjW9ctn00hNmt+TswpatCKWPNwdeAJT2ERynZaqPobENgewrwerqewqIVew7qFeZygxsPVn36EUr2Cdq7Nb7U0XFXh3x1p0v0+MbL4tiJwPlMAGvFTKIMt+EaA+AsRIxiOo9CMk5ZuOl9pT8h5vNuEOcvS0qx4v44EAD2VOsCVCcrPNMcpuSzZP8dRTGU9wRREAWXngD0Zq9YJMH38VTxHiskoBw1NnPz me@home"
}
]
```
* win_chocolatey_source: add new module to manage Chocolatey sources
* Added examples and fix diff run
* Minor fixes from review
* When editing a source, recreate with the explicit options instead of using the existing source
* Fixed up copyright header in PowerShell file
This fix adds dns_suffix as a list of domain suffixes and
also updates documentation and example.
Fixes: #42229
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Windows: Add special parameter types
Adding explicit parameter types now exposes this information in the
module documentation, and proves really helpful.
We only do this for non-string types as strings, mostly because strings
are implicit.
PS We also make copyright statements consistent and use #Requires for
explicit library imports
* Type "string" must be type "str"
* A few more Copyright corrections
* More fixes
* Don't add file encoding to Powershell files
* Don't add missing interfacetypes parameter
Otherwise CI demands an incorrect version_added
* Small fix
This library is a backport (to 2.x versions of Python) of the code
that is found in the mainline versions of Python 3.x. It is being
included so that networking vendors, and others, can make use of it
without needing to add a python module dependency to their own modules.
A separate dependency would add to user burden of satisfying those
dependencies before using some Ansible modules.
In a previous core meeting, this was approved. Naming of the directory
it is found in was up for debate, but "compat" was the first directory
to have some sort of concensus.
Currently get_result() can only handle a dict. When requiring facts, and
when there is more than one fact, get_result() should be able to handle
a list of dicts, so the normalization process happens to all the items.
* Update yum_repository.py
Having spent some time trying and googling how to enable an installed repo with this, I discovered that the thread at https://github.com/ansible/ansible-modules-extras/issues/2384 had decided that this would not be supported and recommended use of ini_file instead. Since I am sure I'm not alone in expecting yum-repository to support enabling/disabling a configured repo, I suggest adding a note so people find this easier.
This fix adds additional check for getting template from
virtual machine before using it.
Fixes: #42011
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Do not compare result to unset parameter in sysvinit module
* Fix misformed command in sysvinit module
* Small None-comparison style fix in sysvinit module
* fix a (forgotten?) change in moving createhome -> create_home
Fix for following bug on FreeBSD host whith user module:
```
fatal: [webssp]: FAILED! => {"changed": false, "module_stderr": "X11 forwarding request failed
Traceback (most recent call last):
File \"/tmp/ansible_2rmlBl/ansible_module_user.py\", line 2487, in <module>
main()\n File \"/tmp/ansible_2rmlBl/ansible_module_user.py\", line 2426, in main
(rc, out, err) = user.modify_user()
File \"/tmp/ansible_2rmlBl/ansible_module_user.py\", line 1011, in modify_user
if (info[5] != self.home and self.move_home) or (not os.path.exists(self.home) and self.createhome):
AttributeError: 'FreeBsdUser' object has no attribute 'createhome'
", "module_stdout": "", "msg": "MODULE FAILURE", "rc": 1}
```
It happenned with 'createhome' AND with 'create_home' form, with python 2.7 AND python 3.6
* Add changelog
Co-authored-by: dgeo <dgeo@users.noreply.github.com>
If user exports https_proxy without scheme, then generic_urlparse
fails to parse SCHEME and HOSTNAME from https_proxy variable.
This fix raises ProxyError is generic_urlparse API fails to parse
either of them.
Fixes: #25421
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Make the code more PowerShell compliant
* Correction of the mistaken comment
* Revert style changes to If/Else/Elseif
* Remove an ignored PSScriptAnalyzer rule due to the code correction
* Decreasing of an entropy ;-) and replacing the next to aliases
* minor whitespace changes
* First pass at making 'private' work on include_role, imports are always public
* Prevent dupe task execution and overwriting handlers
* New functionality will use public instead of deprecated private
* Add tests for public exposure
* Validate vars before import/include to ensure they don't expose too early
* Add porting guide docs about public argument and change to import_role
* Add additional docs about public and vars exposure to module docs
* Insert role handlers at parse time, exposing them globally
* construct_path() now supports custom keys
- Allows for much more flexible test substitution
- Implemented functionality in meraki_vlan for test case
* Fix comments for PEP8
* use get_option instead of directly internal dict
as get_option can populate it, while direct access cannot
also setup fallback values for derived plugins not using config system correctly
The given example causes the pip module to fail. If the umask is given as an octal string without quotation marks, the pip module converts it into an integer (i.e., an invalid umask).
+label: docsite_pr
* add submode features ipv4/ipv6
* add tests for submode
* the parameters both_ * were not idempotent, in what is read in the configuration we have a list with 2 entries (import, export) while the input parameter has only one parameter which will be applied twice
* add docstring to the ios_vrf module + provide a fix for: https://github.com/ansible/ansible/issues/41581
* complete tests
* add missing description
* fix KeyError for address-family ipv*
* fix both_* tests
* fix E231, W292, W293
* fix W293
* remove set has it doesn't preserve order of routes
* fix E106
* remove ImportError: cannot import name OrderedDict
* We should be able to mix the parameters for the routes targets , while remaining imdepotent. During the first implementation we did not take this into account, which did not correspond to the reality of the needs in production (to be able to use each parameter indifemently together)
* remove epdb reference
* FIX E111, E106
* FIX E302
* using loop produce a result who was not imdepotent
* FIX E241
* fix: used pass intead of list
This change adds a new argument to the telnet action plugin that will
cause the module to send a newline character before trying to login.
This is convienent when using telnet over a console connection that
needs an initial newline character to start the login process.
This change also will cause the sent command and command response to be
displayed on stdout when running in verbose mode (5 v's).
* Added Scaleway volume module.
* Fixed imports order.
* Fixed version added.
* Improved sanity checks.
* Fixing style formatting.
* Added new line at the end of file. Fixed typo in comment.
If parameter scope is not set (is None) the usual handling of lists does
not apply, and should be avoided or we get an exception.
This needs to be backported to earlier versions of Ansible.
* Make fetching old style facts optional
and try to fetch the old style facts only when
`ofacts` value is present in `gather_facts`
* Fix in junos_facts integration test
* Add the NIOS RECORD PTR Module
* FIX E241,E231, E105
* FIX module should not be executable
* FIX module RWX
* Remove change in nios_srv_record
* Remove change in nios_srv_record
* FIX test_nios_ptr_record_update_comment
* ADD: Integration and target tests for the NIOS PTR RECORD module.
* FIX module name in integrations tests
* Update integration
* Refactor nios_ptr_record module
* Refactor the nios_ptr_record_idempotence
* FIX name
* Smoketests for the NIOS modules does not take care of the PTR:RECORD object
* REM the default for view
* Add finals test, after adding the PR (https://github.com/ansible/nios-test-container/pull/1) in order to handle PTR:RECORD
* add the define nios specific constant for PTR:RECORD
* fix: documentation style
* add create an ipv6 ptr record
* rename class name, add ipv6 unittest
Move dict_merge from azure_rm_resource module to
module_utils.common.dict_transformations and add tests.
Use dict_merge to provide a fairly realistic, reliable
diff output when k8s-based modules are run in check_mode.
Rename unit tests so that they actually run and reflect
the module_utils they're based on.
* win_reboot: fix 2.6 issues and better handle post reboot reboot
* changed winrm _reset to reset
* Add handler to reset calls when .reset() throws an AnsibleError on older hosts
* Moving back to _reset to get the issue fixed
The ssh connection plugin is overzealous in thinking that error code 255
can only come from ssh. Python can return 255 in some circumstances and
error from php does as well.
* __file__ won't work if we want to invoke modules via -m or if we
figure out how to keep modules from hitting the disk with pipelining.
* module.tmpdir is the new way to place a file where it will be cleaned
automatically.
Change format string to not depend on __file__:
* cloud/amazon/ec2_elb_lb.py
* cloud/amazon/elb_classic_lb.py
Use module.tempdir:
* packaging/os/apt.py
* files/unarchive.py
* complete plugin docs
* add missing 'plugin' option
* user and password are now 'correctly' required
* added inventory source example and extension information for user
The OVSDB schema consists of typed columns. The 'key' parameter is
required only for columns with type of a 'map'. This patch makes 'key'
an optional parameter to allow setting values for other column types
like int.
Fixes#42108
* allow user to pass list of resources in to definition parameter
* Add new validator for list|dict|string
* use string_types instead of string
* state/force information is lost after the first item in the list
* Add tests
* Appease ansibot
* ios_facts: Report file system space
Parse total and free space from dir output. For this, add a hash
filesystems_info containing the keys spacetotal_kb and spacefree_kb.
* ios_facts: Add unit test for file system space reporting
* ios_facts: Add integration test for file system space reporting
* Add support for disable_my_meraki parameter
- Meraki added support for the disabling access to Meraki websites on
devices. This module now supports this.
- I haven't tested this as it was developed on an iPad. It will work
before submitting PR.
- Rework of payload generation code is required or at least
recommended.
- Integration tests need to be developed.
* Added support for disableMyMerakiCom parameter
* - Remove proposed functions as it isn't required for updates
- Add integration tests
- Still pending a case response from Meraki since I can't seem to
set disableMyMerakiCom to false after it's true
* Fixed word wrap problem
* Add version_added to disable_my_meraki
* Initial commit of meraki_ssid module
- CRUD functionality for Meraki wireless SSIDs
- Much more testing is needed
- Module is not currently idempotent
* Improve integration tests
- Original integration tests didn't have any assertions in it
- Single bug fix in module found via integration test
* Added idempotency support
- Changes are only made when needed.
- Added integration test to check for idempotency.
- Relies on a forthcoming PR to make idempotency check a single pass.
* Improved documentation
* Initial commit for meraki_mr_l3_firewall module
- CRUD functionality for layer 3 firewall rules on the Meraki MR access points
- Complimentary integration test
- Need to add support for SSID lookup
* Added support for specifying SSID name and improved documentation
* Added examples to documentation
* Removed whitespace
* Enable get_net() to download nets if data isn't provided
- Currently, get_net() requires data to be passed to it
- PR enables get_net() to download all networks if data isn't passed
- Slightly simpler code
- Best practice is to download nets early in execution
* Apply fixes related to get_net()
* Removed extra code from the rebase
* Enabled support for configuration template configuration
- get_nets() now pulls down templates and networks
- A few changes in VLAN and network to operate as a POC
* Ansibot changes
- Fix undefined variable
- Document net_id in meraki_vlan
* Fix indentation
- Before this, it allowed claiming devices into a network only
- Make integration tests a block
- Note, API doesn't allow unclaiming in an organization, only net
- Added an integration test for claiming into an org
- Requires unclaiming manually
- There is a bug in the API which isn't showing claimed devices
* Added full return documentation for normal responses
* Changed returned for responses
- Old responses were saying always returned, should have been success
or something more refined
* docker_container: ensure 'init' is supported
Check docker-py version too.
Move API version check in docker_container module since 'init' module
parameter isn't defined by other docker modules.
docker-py supports 'init' since 2.2.0:
https://github.com/docker/docker-py/blob/2.2.0/docs/change-log.md
* docker_container: fix compat with docker-py<2.2
Exception was:
TypeError: create_host_config() got an unexpected keyword argument 'init'
fatal: [localhost]: FAILED! => {
"changed": false,
"module_stderr": "Traceback (most recent call last):
File ansible_module_docker_container.py, line 2089, in <module>
main()
File ansible_module_docker_container.py, line 2084, in main
cm = ContainerManager(client)
File ansible_module_docker_container.py, line 1704, in __init__
self.present(state)
File ansible_module_docker_container.py, line 1724, in present
new_container = self.container_create(self.parameters.image, self.parameters.create_parameters)
File ansible_module_docker_container.py, line 826, in create_parameters
host_config=self._host_config(),
File ansible_module_docker_container.py, line 932, in _host_config
return self.client.create_host_config(**params)
File lib/python3.6/site-packages/docker/api/container.py, line 157, in create_host_config
return utils.create_host_config(*args, **kwargs)
TypeError: create_host_config() got an unexpected keyword argument 'init'",
"module_stdout": "",
"msg": "MODULE FAILURE",
"rc": 1
}
* Add additional puppet options
Add support for puppet options --debug, --verbose, --summary,
and extend logdest to support logging to stdout and syslog at
the same time.
Fixes issue: #37986
* Fix docs
* Doc fix, add release note
* Fix silly yaml error
* Correct changelog, add C() to params in doc
* Fix tmpdir on non root become
- also avoid exception if tmpdir and remote_tmp are None
- give 'None' on deescalation so tempfile will fallback to it's default behaviour
and use system dirs
- fix issue with bad tempdir (not existing/not createable/not writeable)
i.e nobody and ~/.ansible/tmp
- added tests for blockfile case
* Revert "Temporarily revert c119d54"
This reverts commit 5c614a59a6.
* changes based on PR feedback and changelog fragment
* changes based on the review
* Fix tmpdir when makedirs failed so we just use the system tmp
* Let missing remote_tmp fail
If remote_tmp is missing then there's something more basic wrong in the
communication from the controller to the module-side. It's better to
be alerted in this case than to silently ignore it.
jborean and I have independently checked what happens if the user sets
ansible_remote_tmp to empty string and !!null and both cases work fine.
(null is turned into a default value controller-side. empty string
triggers the warning because it is probably not a directory that the
become user is able to use).
The docker API init parameter is the dependency requiring this bump. It was introduced 2.3.0 release of the docker package as per commit 13b5f785a7ab459960aae82fae00e4245e391387 in github.com/docker/docker-py.
* inventory plugin docs
* added set options
* minor wording and formatting fixes
* changed headers to std as per #35520, also added to main readme
* unified inventory plugin devel, referenced from generic plugin dev
* fixed typos and update as per feedback
NOTE:
1. Use unsafe decorator but not builtin escape wrapper in jinja2
since ansible will try parse ssh password twice, the builtin
escape wrapper will be removed during the first parse.
2. Use class AnsibleUnsafeText but not '!unsafe' syntax since
passwords are not loaded by YAML env, '!unsafe' syntax doesn't
work for them.
* Fix fetching old style facts in junos_facts module
Fixes#42298
* To fetch old style facts from junos device it requires
login credentials in provider, hence while using
connection=nectonf do not delete provider values
as it might not be ignored
* Add `ofacts` as one of the options in `gather_subset`
* Minor update in documentation
* Fix CI failure
* Update eos cliconf plugin methods
* Refactor eos cliconf plugin
* Changes in eos module_utils as per cliconf plugin refactor
* Fix unit test and sanity failures
* Fix review comment
* Always using current draft when referring to ACME v2.
* Adding URL for ACME v1 protocol.
* Improve cross-referencing of acme_* modules.
* General improvements.
* Fixing syntax error.
* aws_eks_cluster: Improve output documentation
This data is already returned by the module, it just wasn't documented. These
fields are required for accessing the created Kubernetes API with e.g. the
k8s_raw module.
* aws_eks_cluster: Add wait functionality
This enables further cluster configuration once it's created and active.
20 minutes was chosen as an arbitrary default, so that if it takes longer than
the documented "usually less than 10 minutes" it's still likely to succeed.
* Correct security group name in aws_eks tests
* Improve teardown of aws_eks tests
Fix minor teardown issues. The `pause` step is a placeholder until
a waiter for `state: absent`
* Add execution_role_arn parameter
* Change ecs_taskdefinition to use AnsibleAWSmodule
Botocore version checking is becomming more common. Changing the ecs_taskdefinition
to use AnsibleAWSmodule allows more easily for this.
* Change launch type check to use botocore_at_least function
* Remove execution_role_arn param from params dict
* Change check to use parameter
* Fix typo
* Add test for old botocore version
* Add test for execution role parameter
* Remove iam_role_facts task
Task was unecessary. The same information could be gathered by registering
the iam_role task.
* add check description update
* Ensure 'Description' is in the role so KeyError isn't caused
* Fix changed when modifying the description with check mode
Fixes#37262Fixes#36284
* Updates options in netconf connection to enable
bastion/jump host setting using configuration/enviornment
varaibles.
* Update troubleshooting docs from using bastion host with netconf
connection
- Module utility now has orgs, nets, org_id, and net_id properties
- get_nets and get_orgs sets nets and orgs properties respectively
- Allows for storage of this data in the module. org_id and net_id aren’t set as I cannot guarantee that’s always desired.
* Check for HTTP status code
- All requests now check returned status code
- Fail if status code isn’t what is expected
* Fix blank line error
* Change HTTP check logic and improve integration tests
- Set HTTP status code check so default path is accept
- Added create and delete network for integration test
- Remove a few comments to clean up code
* Added support for checking HTTP response codes
- All request calls now check for response code before responding
- If the response code isn't what it should be, it fails or returns nothing
- Breaking this into multiple PRs to make backporting easier
- Using status property in Meraki module utility which has the code
* Change logic of HTTP checks so success is default
- Previously all data between both data structures was compared
- Results in situations where updates are done when not needed
- Changes to single pass so only data in payload is compared
[AWS iam_policy] Avoid the _undefined name_ by catching the raised exception into the variable __e__ so it can be reported on the following line.
flake8 testing of https://github.com/ansible/ansible on Python 3.6.3
$ __flake8 . --count --select=E901,E999,F821,F822,F823 --show-source --statistics__
```
./lib/ansible/modules/cloud/amazon/iam_policy.py:305:16: F821 undefined name 'e'
if e.errno == 2:
^
./lib/ansible/modules/cloud/misc/rhevm.py:594:24: F821 undefined name 'e'
setMsg(str(e))
^
./lib/ansible/modules/files/archive.py:391:92: F821 undefined name 'e'
module.fail_json(dest=dest, msg='Error deleting some source files: ' + str(e), files=errors)
^
3 F821 undefined name 'e'
3
```
* Create base class for network-style connections
* clean up some differences
* Move NetworkConnectionBase
* Tweak netconf for tests
* Tweak when network_os is checked to avoid failing tests
* Pull back exec_command
* request() has improved error reporting
- 5xx errors show same as before
- 3xx and 4xx errors show error body
* Print body for errors greater than 300, but less than 500
* Remove trailing whitespace
Avoid the _undefined name_ and mirror lines 389 and 459 by catching the raised exception in the variable __exc__ so it can be reported on the following line.
flake8 testing of https://github.com/ansible/ansible on Python 3.6.3
$ __flake8 . --count --select=E901,E999,F821,F822,F823 --show-source --statistics__
```
./lib/ansible/module_utils/network/iosxr/iosxr.py:414:42: F821 undefined name 'exc'
module.fail_json(msg=to_text(exc))
^
```
* Revert "Account for empty string regexp in lineinfile (#41451)"
This reverts commit 4b5b4a760c.
* Use context managers for interacting with files
* Store line and regexp parameters in a variable
* Add warning when regexp is an empty string
* Remove '=' from error messages
* Update warning message and add changelog
* Add tests
* Improve warning message
Offer an equivalent regexp that won't trigger the warning.
Update tests to match new warning.
* Add porting guide entry for lineinfile change
* pamd: typo fix sufficicent->sufficient
* pamd: is_valid is a property, not a method; return a tuple
* pamd: define is_valid for all PamdLine classes
* pamd: use validate() for verbose errors, define generically
* pamd: PamdRule: rule_control is always str, use _control
Fixes https://github.com/ansible/ansible/issues/41179
* elasticsearch_plugin - Show STDERR on module failures.
I tried to install a ES plugin without
become: yes
and found after debugging the module that the module failed ude to permission issues.
The only error message I got was
Is analysis-icu a valid plugin name?
That was strange considering I followed the example documentation by the letter.
I found out that when this module fails, it hides the real reason for failure.
This patch replaces the generic error with more meaningful diagnostics.
* elasticsearch_plugin - Show STDERR on module failures. Changelog fragment
samdoran commented 2 days ago
This looks good. Please create a changelog fragment to go along with this change. See fragments for examples.
* Fix bug with redundancy templates and add integration tests for redundancy templates.
* vlan_list absent state support and fix for vlans as strings in vlan_list
* Fix junos_config confirm commit issue
Fixes#40626
* Due to issue in ncclient commit() method for Juniper
device (ncclient/ncclient#238)
add a workaround in junos netconf plugin to generate proper
commit-configuration xml and execute it using ncclient
generic `rpc()` method.
* Update junos_config doc
* Add run_commands api for ios and vyos cliconf plugin
* Add run_commands api to ios and vyos cliconf plugin
* Refactor ios and vyos module_utils to check return code
in run_commands
* Fix Ci failures
Certain project functions are not available on the openstack public api. Creating and deleting projects are examples where you must use the admin api.
In most devstack or simple openstack deployments the public, internal and admin apis may live at the IP. However in most production deployments the admin APIs are on a separate network than the public APIs. Therefore for these examples to consistently work, we must specify the admin endpoint_type.
* Issue #39860: Add 'not_contains' method to parsing.py
* Issue #30860 Adds self.negate to Conditional class in lib/ansible/module_utils/network/common/parsing.py
* Issue #39860 Fix singleton-comparison issue per sanity tests
* Issue #39860 'test/integration/targets/nxos_command/tests/cli/not_comparison_operator.yaml' integration test
* Issue #39860 Add unit tests to '../../test/units/module_utils/network/common/test_parsing.py'
* Issue #39860 Fix singleton comparison issue
* Fix E302 expected 2 blank lines, found 1
* Issue #39860 Add license header to unit tests
* Issue #39860 Move integration test to 'test/integration/targets/nxos_command/tests/common/'; remove unnecessary comment from unit test
* Issue #39860 remove unnecessary comment from unit test
* refactor win_group_membership to use SIDs for comparisons instead of name parsing
* carry over previous doc cleanup changes
* remove trailing whitespace from docs
* If we evaluate task.loop/with_items when calculating delegate_to vars, cache the items. Fixes#28231
* Add comments about caching loop items
* Add test for delegate_to+loop+random
* Be more careful about where we update task.loop
* Create splunk.py
This is a new callback for logging to Splunk. It is based on sumologic.py and updated to work with the Splunk HTTP Event Collector.
This has been by our team and others.
It is working with Ansible 2.5.2
* Update splunk.py
Addressed white spaces and formatting issues
* Update splunk.py
* Update splunk.py
* Updated version to match target release
Following code review recommendations. Thanks for the help
* Updated colon impacting documentation
Updated based on code reviews. Thanks the help
* Updated quotes to be consistent
* Add diff capability in vyos edit_config
Fetch onbox diff within edit_config cliconf
plugin and return it in response
* Remove diff returned from ios edit_config
* Fix CI failure
* More CI fixes
* runas + async - get working on older hosts
* fixed up sanity issues
* Moved first task to end of test for CI race issues
* Minor change to async test to be more stable, change to runas become to not touch the disk
* moved async test back to normal spot
* Add productType property as an ansible fact
Suggest to add productType property from win32_operatingsystem CIM instance to differentiate between versions and add new fact.
* update code to display human-readable string
Commit added in response to nizmahone's suggestion to add humane-readable strings to the display. uses switch statement to evaluate and update $ansible_facts hash table with proper information
* remove string conversion, modify switch default
Adjusts line 202 to remove .String() conversion from uInt32.
Adjusts switch test values to integers
Uses switch default clause to handle null values
* formatting
fixed formatting issues, moved product_type into variable.
adjust ansible_fact hash table key to be consistent with the rest of the code.
* Moved product type within distribution
* Use context managers for interacting with files
* Account for empty string as regexp
Rather than explicitly testing for None, also test for an empty string which will evaluate to False. An empty string regexp matches every line, which ends up replacing the incorrect line.
* Store line parameter in a variable
* Add tests
If a line match is found in the file and no regexp is specified, insertbefore would improperly try to add a line if set to BOF.
Add tests for this scenario.
* Use inventory.get_host instead of direct access to inventory.hosts. Fixes#32152
* Prevent potential side effect, by using self._inventory.localhost directly instead of get_host
* Add a module parameter to configure the max fetched AWS CFN stack events
* Add version documentation for new configuration option
* Increase default in order to make sure that enough are fetched by default. This align roughly with the limit of manageable resources in CloudFormation.
This fix adds a new parameter 'dvswitch_name' in networks argument spec.
When there are multiple distributed portgroup with the same name in the given
environment, it is difficult to pick particular dvpg. By specifying dvswitch value
we can pin point exact distributed portgroup to attach virtual machine to.
Fixes: #41781
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
- Comparison was not happening properly as it lacked full data
- Module now creates a full data structure on payload
- Defaults to America/Los_Angeles as that's what Meraki seems to do
* Fix ios and vyos cliconf edit_config return type
Modify cliconf edit_config api to return a json string with
diff and response received from remote host for ios and vyos.
* Doc change
Upon preparing the commands for sending to the device, cliconf converts
the optional prompt to a byte string. However, since there might be
multiple prompts specified, the conversion has to happen for each prompt
individually. Otherwise, wrong regexes will be compiled in
_handle_prompt from network_cli Connection.
* vyos and ios cliconf plugin refactor
* Refactor vyos cliconf plugin
* Change vyos module_utils and vyos_config as per refactor
* Minor changes in ios cliconf plugin
* Fix unit test failure
* Fix sanity issues
* Add get_diff to rpc list
* fix: exclude using wildcards for tar archives
Fixes#37842, #22947
* fix: Remove quote() as it munges the exclude format
* test: Refactor to use single archive structure
A common structure archived by different methods should simplify some of
the feature tests.
* test: Use common archive layout to validate exclude feature
* test: Use the same exclude checks for zip/tar archives
* validate vars_files entries are string_type or list
Fixes#17594
Signed-off-by: Adam Miller <admiller@redhat.com>
* use collections.Sequence to simplify if check
Signed-off-by: Adam Miller <admiller@redhat.com>
* fix minor issues with debug and item labels
- no more `item=None`, we always have a label now
- debug should only show expected information, either msg= or the var in var=
- also fixed method name, deprecated misleading _get_item
* Update zabbix_screen.py limit screen columns
Add option graphs_in_row that allows to limit the count of columns on zabbix screen. When graphs_in_row columns is filled, begins to draw next row. If there is many hosts with many graphs each, draws all graphs for one host in an column each below each other
* fix remove whitespaces before and after brackets
Fixing ansible-test sanity --test pep8 errors
moved
* fix documentation parsing error
Fixing error: missing documentation (or could not parse documentation): expected string or buffer
* ensure copy action plugin returns an invocation in result
Fixes#18232
Previously the action plugin for copy, which runs operations on the
control host to orchestrate executing both local actions on the
control host and remote actions on the remote host, is not returning
invocation dict in the result dict, this happens here where the
return from _copy_file() is None
When force is True, the _execute_module() method is called, which
returns the dict containing the invocation key. This patch ensures
there is always an invocation key.
Signed-off-by: Adam Miller <admiller@redhat.com>
* fix conditional, handle content no_log
Signed-off-by: Adam Miller <admiller@redhat.com>
* handle groups correctly when they are 'null'
- even if defined as mapping but having no keys, objects shoudl still be processed correctly
- also add ansilbe_verbosity to vars not to display in ansible-inventory
fixes#41692
* Initial commit for meraki_switchport module
- Query or modify swichport configurations
- Further optimizations are available
- Integration tests will require manual editing of file for others
* Remove blank lines
* Implement configuration template management
- Queries or removes templates
- Can bind or unbind templates to networks
- Module is idempotent only for binding and unbinding
- Meraki does not allow template creation via API
- Integration test is tedious b/c previous bullet point
- Fixed bug in construct_path() so it won't set self.function
* PEP8 changes
* Re-enable some integration tests, use variables, and fix broken code
* Initial commit of meraki_vlan module
- Create, delete, modify, and query VLANs within a network
- Support for all allowed objects in the VLAN data structure
- Meraki defaults networks to have VLANs disabled and there is no
way to use the API to enable VLAN support. It must be enabled
manually.
* Fix formatting error in documentation
* Formatting changes and added documentation
* PEP8 fix
* Initial commit for meraki_device module
- Allow claiming, removal, updating, and querying of devices
- Integration tests are included
- Integration tests are not complete because physical gear is required
- Integration tests also require Meraki subscriptions
* Added support for serial number query without network
* Added support for net_id and net_name
* Changes recommended by ansible-test for PEP8 and documentation
* Remove duplicate state in example
* Fix typo
* Add upgrade ('latest') support to pkgng module
* fixup for bad yaml
* fixup for bcoca review:
- add `version_added:` to description
- change examples to use `name:` and remove comments
- DRY out install_packages()
- clean up state conditional check in modules.params
* fixup to remove extra whitespace
* fixup to handle custom pkgsite when checking for updates
* fixup to remove misleading `version_added:`
* add notes to service_facts about accessing fact data
Signed-off-by: Adam Miller <admiller@redhat.com>
* remove unquoted :
Signed-off-by: Adam Miller <admiller@redhat.com>
* Enable to use greedy checks for outdated casks
When using brew cask outdated to check if an installed cask is outdated
or not, brew cask will skip casks that have auto_updates set to true or
version: latest. This means that Ansible tasks using the homebrew_cask
module to upgrade packages installed by brew cask will miss upgrading
such packages. However such packages can still be managed by brew cask
so we need to be able detect such packages. This can be done with the
--greedy flag passed to brew cask outdated as this will also include
such packages that are outdated. This commit adds a greedy parameter to
the homebrew_cask module to enable upgrading such packages using Ansible
tasks with the homebrew_cask module. The default behavior preserves the
same behavior as today. Example usage would be:
- homebrew_cask:
name: 1password
state: upgraded
update_homebrew: yes
greedy: yes
* Fix test issues
* Add extra comma to match style
* Fix vmware host config for all vmware OptionTypes
Setting some options and option types failed with invalid value errors being return from vmware, this resolves all known ways that issue can occur.
* Add logic for integer inputs as string
For example - "UserVars.ESXiShellInteractiveTimeOut": "20"
Fixes#40180Fixes#41212
When parsing the distribution files such as /etc/os-release, we extract
the full distribution version but not the major version. As such, the
ansible_distribution_major_version ends up being 'NA' whereas the
ansible_distribution_version contains the full version.
Before this patch we get this on openSUSE Leap 15
ansible -o localhost -m setup -a filter=ansible_distribution_major_version
localhost | SUCCESS => {"ansible_facts": {"ansible_distribution_major_version": "NA"}, "changed": false}
After this patch we get this
ansible -o localhost -m setup -a filter=ansible_distribution_major_version
localhost | SUCCESS => {"ansible_facts": {"ansible_distribution_major_version": "15"}, "changed": false}
This also fixes the Tumbleweed distribution test to report a proper
major version and also adds a test for openSUSE Leap 15.0 to avoid
potential future regressions.
Fixes: #41410
Read the Docs moved hosting to readthedocs.io instead of
readthedocs.org. Fix all links in the project.
For additional details, see:
https://blog.readthedocs.com/securing-subdomains/
> Starting today, Read the Docs will start hosting projects from
> subdomains on the domain readthedocs.io, instead of on
> readthedocs.org. This change addresses some security concerns around
> site cookies while hosting user generated data on the same domain as
> our dashboard.
There were bugs in this that needed to be resolved. No time to get the
fix reviewed sufficiently for 2.6.0.
We'll get this into 2.7.0 and try to get this into 2.6.1 as well.
Will need the work done in https://github.com/ansible/ansible/pull/36218
when it does get merged.
* service_facts correct meaning of state for systemd service units
Fixes#40809
Previously this module used the commend `systemctl list-unit-files
--type=service` to query state of services but list-unit-files only
shows enabled vs disabled which is not what we want for "state"
Signed-off-by: Adam Miller <admiller@redhat.com>
* make sure to define service_name before referencing it
Signed-off-by: Adam Miller <admiller@redhat.com>
* Support Smart Inventories
Add kind and host_filter fields and pass through to tower_cli.
* Add documentation for new Smart Inventories options
* Add missing description header for host_filter documentation
* Add version added tags to new options
* Bumped vesion_added to 2.7
* Add aws/core.py function to check for specific AWS error codes
* Use sys.exc_info to get exception object if it isn't passed in
* Allow catching exceptions with is_boto3_error_code
* Replace from_code with is_boto3_error_code
* Return a type that will never be raised to support stricter type comparisons in Python 3+
* Use is_boto3_error_code in aws_eks_cluster
* Add duplicate-except to ignores when using is_boto3_error_code
* Add is_boto3_error_code to module development guideline docs
* When using ANSIBLE_JINJA2_NATIVE bypass our None filtering in _finalize. Fixes#41392
* Add tests for _finalize bypass
* Address python3 failures in tests
* Connecting app network to vApp
This fixes connection mechanism for connecting app network to vApp and VM
after vApp creation, returning the IP assigned to the VM as fact 'vm_ip'
* removed duplicate check on task fail for vApp creation. Fixed issue with network_mode value for VCD version > 5.7
* fixed trailing white space
Signed-off-by: Kaneda-fr <sebastien@lacoste-seris.net>
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* pip tests: remove trailing spaces
* pip tests: use Jinja tests
* fixup! pip tests: remove trailing spaces
* pip tests: use 'command' instead of 'shell' module
* pip tests: remove unused variable
* pip tests: use a package with fewer dependencies
sampleproject has one dependency: 'peppercorn' and peppercorn doesn't
have any dependency.
* pip tests: check that 'name' param handles list
* pip: squash package parameters
Note that squashing will be removed in 2.11, new code should directly
use a list with the 'name' parameter.
python2-lxc module needs bytes, on the other hand python3-lxc requires text.
To solve such incompatibility, use to_native other than to_bytes.
This fixes#41060.
When we read files from disk we always want to read them as bytes and
then convert them to text ourselves. This gives us greater control over
what encodings are used, what to do in case of errors decoding the bytes
to text, and better resilience against problems on both Python 2 and
Python 3.
If we left it up to Python to do this, on Python2, this could mean
that config values end up as bytes (leading to tracebacks elsewhere in
the code). In Python3, it could traceback if the user's locale did not
match with the encoding of the ini file or config files could be decoded
as the user's locale encoding instead of as utf-8.
* VMware: Allow user to select disk_mode
This fix allows user to select disk modes for given disk configuration
in the given VM.
Fixes: #37749
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Review comments
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Don't ignore a duplicate host for an already processed include, assume that the repetition indicates a new include. Fixes#40317
* Add intg tests to ensure duplicate items in loop are not deduped
* Add note about relative indexing
* add example using peer keepalive vrf and delay restore
<!--- Your description here -->
add example using peer keepalive vrf and delay restore
+label: docsite_pr
+label: issue ansible/community#311
* Update nxos_vpc.py
update task name to include "existing"
The LDAP values may be of any kind (pictures, bytes, etc.) thus, ldap module enforce a "bytes" type.
We should pass properly encoded values instead of str
Fixes: #39569
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Test case for missing permissions
* Update aws_s3 module to latest standards
* Use AnsibleAWSModule
* Handle BotoCoreErrors properly
* Test for BotoCoreErrors
* Check for XNotImplemented exceptions (#38569)
* Don't prematurely fail if user does not have s3:GetObject permission
* Allow S3 drop-ins to ignore put_object_acl and put_bucket_acl
* If the command input is dict from module
in that case the check to see if command is
end or `!` to exclude it from executing on remote
host is wrong. Fix the logic to check `end` and
`!` commands
* aws_eks: New module for managing AWS EKS
aws_eks module is used for creating and removing EKS clusters.
Includes full test suite and updates to IAM policies to enable it.
* Clean up all security groups
* appease shippable
* Rename aws_eks module to aws_eks_cluster
* changing metadata to core support
* changing metadata to core support
* changing metadata to core support
* changing metadata to core support
* changing metadata to core support
* Changed request() to run json.loads() instead of module doing it
- Removed json.loads() from modules
- Removed some unreliable integration tests
- Removed self.function setting in construct_path()
-
* PEP8 changes
* Remove debug line for push
* Allow the use of 'aws:kms' as an encryption method
* Allow the use of a non standard KMS key
* Deduce whether AWS Signature Version 4 is required rather than specifying with a parameter
The compute policy was exceeding maximum size and contained
policies that already exist in ecs-policy.
Look up suitable AMIs rather than hardcode
We don't want to maintain multiple image IDs for multiple regions
so use ec2_ami_facts to set a suitable image ID
Improve exception handling
Fargate instances do not require memory and cpu descriptors. EC2 instances
do require descriptions. https://botocore.readthedocs.io/en/latest/reference/services/ecs.html#ECS.Client.describe_task_definition
Fargate requires that cpu and memory be defined at task definition level.
EC2 launch requires them to be defined at the container level.
Fargate requires the use of awsvpc for the networking_mode. Also updated,
the documentation regarding where and when memory/cpu needs to the assigned.
The task_definition variable for the awspvc configuration colided with
the ecs_service for the bridge network. This would cause the test to fail.
Add testing for fargate
Add examples for fargate and ec2
* Adding a switch to print logs
* Update to docs
* Adding `version_added` for the new option
* Updating version added
* Moving `output_logs` before `paued` for alphabetically ordering.
When using an empty string as the version argument, the module would
before attempt to run something akin to:
pip install module==""
This changes the behavior to:
pip install module
Fixes#41043
* Add support for classmap-authoritative option for composer
* Add support for apcu-autoloader option for composer
* Fix a typo for the no-plugins option
* Refactor ios cliconf plugin and ios_config module
* Refactor ios cliconf plugin to support generic network_config module
* Refactor ios_config module to work with cliconf api's
* Enable command and response logging in cliconf pulgin
* cliconf api documentation
* Fix unit test and other minor changes
* Doc update
* Fix CI failure
* Add default flag related changes
* Minor changes
* redact input command logging by default
In the process of building up the inventory by parsing each inventory
source with each available inventory plugin, there are three kinds of
possible errors (listed in order from earliest to latest):
1. One source could not be parsed by a particular plugin.
2. One source could not be parsed by any available plugin.
3. ALL sources could not be parsed by any available plugin.
The errors in (1) are a part of normal operation, e.g., the script
plugin is expected to fail to parse an ini-format source, and we will
ignore that error and try the next plugin. There is currently no way to
control this, and no known compelling use-case for a setting to control
it. This commit does not make any changes here.
We implement "any_unparsed_is_failed" to handle (2) above. If enabled,
this requires that every available source be parsed validly by at least
one plugin. In an inventory comprising a static hosts file and ec2.py,
this setting will cause a fatal error if ec2.py fails (a situation that
attracted only a warning earlier).
We clarify that the existing "unparsed_is_failed=true" setting causes a
fatal error only in (3) above, i.e., if NO inventory source could be
parsed. In other words, if there is ANY valid source in the inventory
(e.g., an ini-format static file), no combination of errors and the
setting will cause a fatal error.
If you want to execute your playbooks when your inventory is…
(a) complete, use "any_unparsed_is_failed=true".
(b) not empty, use "unparsed_is_failed=true".
The "unparsed_is_failed" setting should be renamed to
"all_unparsed_is_failed", but this commit does not do so.
Fixes#40512Fixes#40996
* Updating tower_job_template.py
* tower_job_template: Update parameter version_added to 2.7
* Ensure that unset credentials aren't passed
Passing empty strings for unset credentials causes ValueErrors as
the API expects an integer. Don't pass unset credentials
* tower_inventory_source: Add support for the inventory source via ansible-tower-cli.
* Add test coverage for tower_inventory_source.
* Update version_added to 2.7
* diff in as-path-set or prefix-set
* fix caveat diff can not have last line with comma in prefix-set/as-path/community-set
* Simplify fix to include indentation before parse
* remove debugger
* route-policy diffs
* fix iosxr_config crash issue
* new changes in iosxr_config after git add
* end-policy-map and end-class-map are properly indented so match misplaced children only when end-* is at the beigining also fix pep8
* Remaining config blocks of route-policy which needs exclusion from diff. added new tests
* pylint/pep8 warnings
* Review comments , sanity test fix
* shbang warning
* remove unused import
* added validate_certs option to zabbix_*_facts modules and fixed documentation to use doc fragment
* removed code duplication from zabbix_host_facts module
The parent parameter was not being used in the module. This meant
that all child profiles would use the system-defined parent instead
of the parent specified in the module
* fix ec2_ami block_device_mapping size to be int
* fixed cr issues
renamed `type` to `attribute_type`
reused `new_item` instead of creating new variable `value`
Fixes: #40631
The module was not correctly handling a certain state where the node
could be down, but the monitor was enabled on the node.
This patch fixes it.
With the addition on ajson.py in cbb6a7f4e8, two
new classes were created: AnsibleJSONDecoder and AnsibleJSONEncoder. These
classes are used when calling json.looads() and json.dumps().
This works fine with everything except the jsonfile.py cache plugin, which would
first try to import simplejson as json, then fall back to json. When simplejson
is installed, the load() or dump methods from simplejson are called, which then
try to use the AnsibleJSONEncoder/AnsibleJSONDecoder subclass from ajson.py.
But asjon.py imports json, not simplejson, and things blow up.
The debug message stated that the vault password client script was invoked as `example.py --vault-id=example`, while it's actually `example.py --vault-id example`.
* Adds requests.Session like class
* py2 syntax fix
* Add a few examples to the Request docstrings
* Add helper methods and docs
* Fix test failures
* Switch tests to test Request instead of open_url, add simple open_url test to validate funcitonality
* Fix filename in replace-urlopen code smell test
Removes the SSH enforcement because it breaks situations where, for example,
an admin maintains Ansible Tower and another team needs to use Ansible
with the BIG-IP modules, but the Tower admin does not want to install
the F5-SDK on the Ansible Tower instance.
In this situation, the user needs to delegate the execution of the BIG-IP
module to another linux host that does have the dependencies installed.
Usually this is done with delegation, often over SSH. Limiting the SSH
connection here prevents this from working.
* Support 'apply' to apply attributes to included tasks
* Cannot validate args for task_include
* Only allow apply on include_
* Re-enable arg validation, but only for include_tasks and import_tasks
* s/task/ir/
* Add tests for include_ apply
* Include context with AnsibleParserError
* Add docs for apply
* version_added
* Add free-form documentation back
* Add example of free-form with apply
* First pass at a src parameter that can be used in place of body. Supports binary files
* Add test for uri src body
* Bump version_added to 2.6
* Close the open file handle
* Add uri action plugin that handles src/remote_src
* Document remote_src
* Remove duplicate info about remote_src
* Bump version_added to 2.7
* Fixes ios_logging idempotency issues
* Added intergration tests & minor fixes
* Minor fixes in tests
* Minor fixes in tests #2
* eos_logging fixes after PR review
* Adding changed option to save_when for aireos
* Deprecating save option for aireos_config.
* Updating version_added to 2.7 since the PR missed the window for 2.6
* To fix following github issues 35774, 36574 and 39494
* To fix following github issues 35774, 36574 and 39494
* To fix following github issues 35774, 36574 and 39494
* To fix following github issues 35774, 36574 and 39494
* To fix following github issues 35774, 36574 and 39494
* To fix following github issues 35774, 36574 and 39494
* removed old_name new entry to make ui cleaner
* removed old_name new entry to make ui cleaner
* removed old_name new entry to make ui cleaner
* removed old_name new entry to make ui cleaner
* removed old_name new entry to make ui cleaner
* removed old_name new entry to make ui cleaner
* to resolve the bug 40709
* reslove shippable error
* reslove shippable error
* reslove shippable error
* reslove shippable error
* reslove shippable error
* reslove shippable error
* reslove shippable error
* reslove shippable error
* reslove shippable error
* to fix shippable nios automation error
* modified the name input parsing method
* modified the name input parsing method
* modified the name input parsing method
* modified the name input parsing method
* modified the name input parsing method
* modified the name input parsing method
* modified the name input parsing method
* modified the name input parsing method
* modified the name input parsing method
* shippable error fix
* shippable error fix
* shippable error fix
* shippable error fix
* shippable error fix
* review comment fix
* shippable error fix
* shippable error fix
* All instances of local connection should use _remote_is_local=True. Fixes#40551
* Switch to instance attribute for synchronize
* Add test that shows that synchronize _remote_is_local addresses tmpdir building
* Move k8s modules to dynamic backend
* update required openshift version
* update -> patch
* use new dynamic client exceptions
* style
* guard urllib3 import
* guard ansibleerror import
* give more information about error cause
* format in variable
* style
* rename tests
* Search for provided kind in a few more places to match old behavior, properly handle failure
* make common code use fail instead of fail_json, to work for lookup plugins as well
* update docs
* move openshift_raw tests into k8s tests
* fix typo
* Use diff of response and resource to determine change, don't do any checking client-side before making requests
* remove duplicate yaml blocks
* Update porting guide for k8s module
* remove invalid doc refs
* If fuzzy searching finds a resource, update resource_definition to match proper kind and version
* remote unsupported openshift_raw variables
* properly check environment variables when determining auth method:
* Remove 1.1.1.1 from *_config tests
* remove from *_smoke and *_system
* Miscellaneous other tests
* Remove from module documentation as well
* Remove from unit tests as well
* Remove accidental duplication from rebase
* Add a module to create a java key store (jks) from a certificate
* Create a jks from a certificate and a private key (secured by a password)
* Add an option to recreate the jks (useful when you want to update the jks password)
* If the certificate changed, recreate the jks
* Version added is now 2.7
One of Ansible best practices is "Always Name Tasks".
This should include tasks in examples as well so people can learn
what is the right way to use it.
Also fixes a discovered bug in block rescue detection related to inserting
the ansible_failed_{result|task} variables when the rescue is in a nested
block.
* Return the expected prompt character based on become status
* Update eos_banner tests for eapi
* Update eos_config tests for eapi
* Update eos_facts tests for eapi
* Update eos_interface tests for eapi
* Update eos_l3_interface tests for eapi
* Update eos_lldp tests for eapi
* Update eos_logging tests for eapi
* Update eos_smoke tests for eapi
* Update eos_system tests for eapi
* Do not gather mem facts if command invalid
In some firmwares, 'show memory statistics' fail, thus
do not populate mem if we got a failure after running that command.
* Fix pep8
* Warn if got error when running 'sh memory statistics'
* Fix pep8
* nxos_vlan fix
Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>
* uncomment mode test as nxapi now has get_capabilities
Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>
* First pass at vmware_deploy_ovf functionality
* Add OVA file support, re-structure code
* Move some useful functions to module_utils.vmware, and perform a little DRY too
* Better handling of errors during spec validation and import
* Properly calculate the lease progress percentage for all vmdk files
* Make warnings and errors a little better
* Add an allow_duplicates argument, that defaults to true, to allow users to have name based idempotency
* Add fail_on_spec_warnings to cause the module to treat warnings as errors
* Support non-vmdk uploads
* Add ova alias for ovf
* Rename vmdk_post_url to device_upload_url so it does not sound to specific to VMDK files
* Safer handling of * hostname in urls
* Add default Content-Type, remove unused headers var
* Add deploymentOptions and propertyMapping functionalities
* Add basic check_mode support
* Add vmware_deploy_ovf to list of use-argspec-type-path ignores
* Update version_added and fix path for use-argspec-type-path
* Add configurable folder
* Doc changes
* Add nxos_install_os integration tests
* Update call to check timers
* Update check_ansible_timer method
* Modify network_cli integration tests
* Add timer check for nxos_install_os
* Add comments for clear_persistent_sockets
* Update connection info for tests
* More updates
* Restructure files for provider and non-provider testing
* Update env var name and add check for ISSU switchover
The openstack modules do not support python 2.6 as the underlying
library dependency (openstacksdk) does not support python 2.6. Update
the docs to make this clear.
* check if timestamp is set in maven-metadata.xml. If it is not set, we don't have unique snapshot artifacts and can return the artifact name with the appended -SNAPSHOT
* Make use of a python module that is not deprecated anymore
* Updating version_added: "2.6" to version_added: "2.7"
* Added missing line
* Added notification about using different python module
PR #39373
* Add extra_specs to os_subnet module
This change removes the parameter limitation on `os_subnet` module for
Neutron subnet creation.
This way, any key value passed via `extra_specs` argument is included in
shade's API call.
Signed-off-by: Mário Santos <mario.rf.santos@gmail.com>
* Set default value of extra_specs to None
Signed-off-by: Mário Santos <mario.rf.santos@gmail.com>
* Raise ValueError in case of duplicate keys found
Signed-off-by: Mário Santos <mario.rf.santos@gmail.com>
* Update docs default value of extra_specs to {}
* Move cidr to kwargs to avoid positional argument
Signed-off-by: Mário Santos <mario.rf.santos@gmail.com>
* Print explicit list of duplicate keys
Signed-off-by: Mário Santos <mario.rf.santos@gmail.com>
* Fix precedence on the dict merge
Signed-off-by: Mário Santos <mario.rf.santos@gmail.com>
* Bump version_added of the extra_specs parameter
Signed-off-by: Mário Santos <mario.rf.santos@gmail.com>
* Add support for `mysqldump`'s `--ignore_table` switch.
* Fix documentation and default linter warning re: default parameter
* Add number to replacement field in cmd string
* Bump version_added to 2.7
* adds name server group support to nios_zone
* fixes style issues
* adds support for restart_if_needed
* adds type: bool to documentation for restart_if_needed
* doc fix
This is a helper for identifying whether the var is a sequence,
but is not of string-like type (optionally).
Co-authored-by: Toshio Kuratomi <toshio@fedoraproject.org>
Co-authored-by: Brian Coca <briancoca+dev@gmail.com>
Co-authored-by: Abhijeet Kasurde <akasurde@redhat.com>
The current example configuration is not
quite right, so this patch implements a
fix which corrects it
The 'inventory_hostname' argument is removed
as it's the same value as the default.
* Establish connection through openstacksdk
* Switch from shade to openstacksdk
* fix typo in link to openstacksdk
* remove nova_client usage
* further remove of min_version from openstack modules
* Initial commit for meraki_admin module
* Initial commit for meraki_snmp module
* Update code to be operational for SNMP settings
- Add optional_ignore value to is_update_required for one-time fields
- Write documentation
- Perform checks and execute changes
* Minor fixes and test improvements
- Fix some documentation errors
- Implement and test for idempotency
* Removed meraki_admin which shouldn't be there, ansibot changes
* Rename params to be lower case
- Updated integration tests
- Changed CamelCase to lowercase and underscore
* Code cleanup changes based on comments from Dag.
* Add cleaning function to handle **params
The cleaning function is only added to tower modules which pass a `**params`
argument as an unpacked dictionnary to the tower-cli method calls.
Fix#39745
* Remove previous code added only for tower_role
In 872a7b4, the `update_resources` function was modified so that it would clear unwanted
parameters. However, this behaviour is desired for other modules too, modified in
another commit. (see tower_clean_params).
* Port aws_ses_identity module to use AnsibleAWSModule
* Support Check Mode in aws_ses_identity
* Add tests for check mode
* Move feedback forwarding parameter check to before any changes are made.
* Fixed check_mode status to be the same as normal execution
* Now when setting the status to `disabled` in check_mode it correctly
returns the state changed and prints a warning like it does in normal
model. Before it always returned changed even if everything was set
correctly and a reboot was required.
* Add changelog entry
Co-authored by: Strahinja Kustudic <kustodian@gmail.com>
* Added interpreter parameter to the script module
* Let required and default parameters get documented implicitly for binary parameter
* Renamed interpreter parameter to executable
When running the test test/units/module_utils/urls/test_open_url.py
test_open_url_no_validate_certs, the test fails because of the SSLv2
check.
Test is run on a machine using openssl 1.1.0g. By reading the openssl
man page[1], one can see that support for SSLv2 has been removed.
> Support for SSLv2 and the corresponding SSLv2_method(),
> SSLv2_server_method() and SSLv2_client_method() functions where removed
> in OpenSSL 1.1.0.
>
> SSLv23_method(), SSLv23_server_method() and SSLv23_client_method() were
> deprecated and the preferred TLS_method(), TLS_server_method() and
> TLS_client_method() functions were introduced in OpenSSL 1.1.0.
Hence this commit remove the uses of this flag when it is not defined.
[1] https://www.openssl.org/docs/man1.1.0/ssl/SSLv23_method.html
As mentioned in this answer https://stackoverflow.com/a/41549694/6778826 we was able to solve a bad behaviour of `blockinfile` module.
We must change two parts in one file which we have done in two tasks. Every run have rewriten the first block with the second block in the wrong position. **After** we have set the `marker` in the second task to another value was the `blockinfile` module able to insert both parts in the right position in the same file.
* os_project_access: correct example tasks
The example task does not work. Fix it so that it does.
* os_project_access: Remove unused function
The _get_allowed_projects function is not used anywhere,
so we can remove it and be free of nova_client for this
module.
The os_server module uses the deprecated nova_client function, and
therefore ends up requiring python-novaclient installed. In this
patch we switch the ip detachment to make use of a shade function,
removing the need for python-novaclient.
* The module now correctly sets the timezone in both the config file and
in /etc/localtime; while hwclock is set in both the config and
/etc/adjtime.
* Module checks if the timezone is actually set by checking
/etc/localtime. Before it only checked if it was set in the config file.
* Fixed module not setting the timezone on RedHat systems if
/etc/localtime was a symbolic link.
* Fixed module failures in case of missing config files or incorrect data
in them.
* Added a lot of integrations tests to cover most of these situations.
* Add start and end timestamp to task result in json callback
Currently, the timestamp information is only provided directly by a few
Ansible modules (e.g. the command module, which shows the runtime of a
command per host result).
This change adds an 'overall' time information to all executed tasks. The
delta between both timestamps shows how long it took a task to finish
across all hosts/nodes.
This patch is also proposed for zuul and can be found here:
https://review.openstack.org/#/c/563888
* Add missing timezone information to 'start' and 'end' timestamps
As the datetime.isoformat() function is missing the timezone information,
we assume it's local time.
* Nest 'start' and 'end' timestamps in 'duration' field.
To clarify the purpose of those fields.
* Add 'start' and 'end' timestamps also for plays
* Add a 'machinectl shell' become_method
* docs: add explanations for the machinectl become_method
* docs: machinectl become_method: specify this part is specific to Linux+systemd setups
* cs_instance: implement host migration support
* fix build
* fail fast on update if user is not admin
* improve tests a bit
* expunge it
* fix typo
* disable temporarly verify for host on starting instance.
Add `mode` option which sets permission mode of a VM in octet format
Add `owner_id` and `group_id` which set the ownership of a VM
Move the waiting for state at the end of the module, so it could fail faster if there is some error
tagged_instances will only be returned only if count_attributes and/or count_labels are used, as specified in the documentation
Update relevant tests
Add tests for mode, owner_id, group_id
* Fix errors decrypted non-ascii vault vars
AnsibleVaultEncryptedUnicode was just using b"".decode()
instead of to_text() on the bytestrings returned from
vault.decrypt() and could cause errors on python2
if non-ascii since decode() defaults to ascii.
Use to_text() to default to decoding utf-8.
add intg and unit tests for value of vaulted vars
being non-ascii utf8
based on https://github.com/ansible/ansible/issues/37258Fixes#37258
* yamllint fixups
* Subversion: If the directory exists, we want the ability to checkout into it
and use the content as existing files; equivalent to svn checkout --force
I was expecting the force option to do this, however I understand why it
doesn't do that currently. I was debating with changing the meaning of force
to include this behaviour, however I've opted for a seperate flag for now
for backwards compatibility.
* Subversion: Sanity tests have failed suggesting this is the correct value
https://app.shippable.com/github/ansible/ansible/runs/60302/1/console
* Add documentation for setting multiple options.
* Do not set `cluster' to myhostname, if cluster is not set. This will cause
parse error, since module will try to parse the brick and hosts.
* Also fixes issue #40410
* gluster_peer: Module to create/dismantle trusted storage pool
* gluster_peer: Module to create/dismantle trusted storage pool
Added __init__.py and added function main() in the module.
* gluster_peer: Module to create/dismantle trusted storage pool
Empty __init__.py was needed. Removed comment from the file.
* gluster_peer: Module to create/dismantle trusted storage pool
Addressed review comments.
* gluster_peer: Module to create/dismantle trusted storage pool
Do version check more sanely, improve parameter handling.
* gluster_peer: Module to create/dismantle trusted storage pool
Use isinstance for type comparison.
* gluster_peer: Module to create/dismantle trusted storage pool
Use type=list for nodes parameter, get rid of literal_eval.
* gluster_peer: Module to create/dismantle trusted storage pool
Add parameter check_mode, had missed this somewhere in between.
* gluster_peer: do not set `force' in case of state=present
* gluster_peer: Fix typo in the documentation
* gluster_peer: make peer probe idempotent
* gluster_peer: Fix a logical error while evaluating booleans
* gluster_peer: set locale to C, pass list to run_command
* Adding module for AWS Config service
* adding integration tests
* Split resource types into their own modules
* Properly use resource_prefix and retry on IAM "eventual consistency"
* Add config aggregator module
* AWS config aggregator integration test fixes
* AWS config recorder module
* Config aggregation auth rule
* Use resource_prefix in IAM role name
* Disable config tests
* seconds set of netapp modules
* fixes
* Fix issues
* Fix future issues
* fix issues
* Fix issues
* changes
* Change force
* made fixes
* add new line to end of file
* Fix setting the cache when refresh_cache or --flush-cache are used
* Use jsonify function that handles datetime objects in jsonfile cache plugin
* Don't access self._options directly
* Add initial integration tests for aws_ec2 inventory plugin
* Add CI alias
* Fix and add a few more unit tests
* Add integration tests for constructed
* Fix typo
* Use inventory config templates
* Collect all instances that are not terminated by default
* Create separate playbook for setting up the VPC, subnet, security group, and finding an image for the host
Create a separate playbook for removing the resources
* Allow easier grouping by region and add an example
* use a unified json encode/decode that can handle unsafe and vault
