1
0
Fork 0
mirror of https://github.com/ansible-collections/community.general.git synced 2024-09-14 20:13:21 +02:00

Replace bogus (but routeable) ip addresses with RFC 5737 example addresses (#40554)

* Remove 1.1.1.1 from *_config tests

* remove from *_smoke and *_system

* Miscellaneous other tests

* Remove from module documentation as well

* Remove from unit tests as well

* Remove accidental duplication from rebase
This commit is contained in:
Nathaniel Case 2018-05-30 13:03:20 -04:00 committed by GitHub
parent 91eb4a034e
commit 82dfa542c2
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
111 changed files with 1136 additions and 1136 deletions

View file

@ -221,10 +221,10 @@ EXAMPLES = """
- name: load an acl into the device
eos_config:
lines:
- 10 permit ip 1.1.1.1/32 any log
- 20 permit ip 2.2.2.2/32 any log
- 30 permit ip 3.3.3.3/32 any log
- 40 permit ip 4.4.4.4/32 any log
- 10 permit ip 192.0.2.1/32 any log
- 20 permit ip 192.0.2.2/32 any log
- 30 permit ip 192.0.2.3/32 any log
- 40 permit ip 192.0.2.4/32 any log
parents: ip access-list test
before: no ip access-list test
replace: block

View file

@ -241,11 +241,11 @@ EXAMPLES = """
- name: load new acl into device
ios_config:
lines:
- 10 permit ip host 1.1.1.1 any log
- 20 permit ip host 2.2.2.2 any log
- 30 permit ip host 3.3.3.3 any log
- 40 permit ip host 4.4.4.4 any log
- 50 permit ip host 5.5.5.5 any log
- 10 permit ip host 192.0.2.1 any log
- 20 permit ip host 192.0.2.2 any log
- 30 permit ip host 192.0.2.3 any log
- 40 permit ip host 192.0.2.4 any log
- 50 permit ip host 192.0.2.5 any log
parents: ip access-list extended test
before: no ip access-list extended test
match: exact
@ -279,12 +279,12 @@ updates:
description: The set of commands that will be pushed to the remote device
returned: always
type: list
sample: ['hostname foo', 'router ospf 1', 'router-id 1.1.1.1']
sample: ['hostname foo', 'router ospf 1', 'router-id 192.0.2.1']
commands:
description: The set of commands that will be pushed to the remote device
returned: always
type: list
sample: ['hostname foo', 'router ospf 1', 'router-id 1.1.1.1']
sample: ['hostname foo', 'router ospf 1', 'router-id 192.0.2.1']
backup_path:
description: The full path to the backup file
returned: when backup is yes

View file

@ -74,18 +74,18 @@ EXAMPLES = """
junos_l3_interface:
aggregate:
- name: ge-0/0/1
ipv4: 1.1.1.1
ipv4: 192.0.2.1
- name: ge-0/0/2
ipv4: 2.2.2.2
ipv4: 192.0.2.2
ipv6: fd5d:12c9:2201:2::2
- name: Delete ipv4 address using aggregate
junos_l3_interface:
aggregate:
- name: ge-0/0/1
ipv4: 1.1.1.1
ipv4: 192.0.2.1
- name: ge-0/0/2
ipv4: 2.2.2.2
ipv4: 192.0.2.2
state: absent
"""
@ -96,7 +96,7 @@ diff:
type: string
sample: >
[edit interfaces ge-0/0/1 unit 0 family inet]
+ address 1.1.1.1/32;
+ address 192.0.2.1/32;
[edit interfaces ge-0/0/1 unit 0 family inet6]
+ address fd5d:12c9:2201:1::1/128;
"""

View file

@ -94,7 +94,7 @@ EXAMPLES = """
interfaces:
- ge-0/0/3
- ge-0/0/2
rd: 1.1.1.1:10
rd: 192.0.2.1:10
target: target:65514:113
state: present
@ -105,7 +105,7 @@ EXAMPLES = """
interfaces:
- ge-0/0/3
- ge-0/0/2
rd: 1.1.1.1:10
rd: 192.0.2.1:10
target: target:65514:113
state: absent
@ -116,7 +116,7 @@ EXAMPLES = """
interfaces:
- ge-0/0/3
- ge-0/0/2
rd: 1.1.1.1:10
rd: 192.0.2.1:10
target: target:65514:113
active: False
@ -127,7 +127,7 @@ EXAMPLES = """
interfaces:
- ge-0/0/3
- ge-0/0/2
rd: 1.1.1.1:10
rd: 192.0.2.1:10
target: target:65514:113
active: True
@ -139,14 +139,14 @@ EXAMPLES = """
interfaces:
- ge-0/0/3
- ge-0/0/2
rd: 1.1.1.1:10
rd: 192.0.2.1:10
target: target:65514:113
- name: test-2
description: test-vrf-2
interfaces:
- ge-0/0/4
- ge-0/0/5
rd: 2.2.2.2:10
rd: 192.0.2.2:10
target: target:65515:114
state: present
"""
@ -163,7 +163,7 @@ diff.prepared:
+ instance-type vrf;
+ interface ge-0/0/2.0;
+ interface ge-0/0/3.0;
+ route-distinguisher 1.1.1.1:10;
+ route-distinguisher 192.0.2.1:10;
+ vrf-target target:65514:113;
+ }
"""

View file

@ -158,7 +158,7 @@ EXAMPLES = '''
seq: 10
action: permit
proto: tcp
src: 1.1.1.1/24
src: 192.0.2.1/24
dest: any
state: present
'''
@ -168,7 +168,7 @@ commands:
description: commands sent to the device
returned: always
type: list
sample: ["ip access-list ANSIBLE", "10 permit tcp 1.1.1.1/24 any"]
sample: ["ip access-list ANSIBLE", "10 permit tcp 192.0.2.1/24 any"]
'''
from ansible.module_utils.network.nxos.nxos import load_config, run_commands
from ansible.module_utils.network.nxos.nxos import nxos_argument_spec, check_args

View file

@ -220,7 +220,7 @@ EXAMPLES = '''
nxos_bgp:
asn: 65535
vrf: test
router_id: 1.1.1.1
router_id: 192.0.2.1
state: present
'''
@ -229,7 +229,7 @@ commands:
description: commands sent to the device
returned: always
type: list
sample: ["router bgp 65535", "vrf test", "router-id 1.1.1.1"]
sample: ["router bgp 65535", "vrf test", "router-id 192.0.2.1"]
'''
import re

View file

@ -151,7 +151,7 @@ EXAMPLES = '''
# create a new neighbor
- nxos_bgp_neighbor:
asn: 65535
neighbor: 3.3.3.3
neighbor: 192.0.2.3
local_as: 20
remote_as: 30
description: "just a description"
@ -164,7 +164,7 @@ commands:
description: commands sent to the device
returned: always
type: list
sample: ["router bgp 65535", "neighbor 3.3.3.3",
sample: ["router bgp 65535", "neighbor 192.0.2.3",
"remote-as 30", "update-source Ethernet1/3",
"description just a description", "local-as 20"]
'''

View file

@ -213,7 +213,7 @@ EXAMPLES = '''
- name: configure RR client
nxos_bgp_neighbor_af:
asn: 65535
neighbor: '3.3.3.3'
neighbor: '192.0.2.3'
afi: ipv4
safi: unicast
route_reflector_client: true
@ -225,7 +225,7 @@ commands:
description: commands sent to the device
returned: always
type: list
sample: ["router bgp 65535", "neighbor 3.3.3.3",
sample: ["router bgp 65535", "neighbor 192.0.2.3",
"address-family ipv4 unicast", "route-reflector-client"]
'''

View file

@ -226,21 +226,21 @@ EXAMPLES = """
- nxos_config:
lines:
- 10 permit ip 1.1.1.1/32 any log
- 20 permit ip 2.2.2.2/32 any log
- 30 permit ip 3.3.3.3/32 any log
- 40 permit ip 4.4.4.4/32 any log
- 50 permit ip 5.5.5.5/32 any log
- 10 permit ip 192.0.2.1/32 any log
- 20 permit ip 192.0.2.2/32 any log
- 30 permit ip 192.0.2.3/32 any log
- 40 permit ip 192.0.2.4/32 any log
- 50 permit ip 192.0.2.5/32 any log
parents: ip access-list test
before: no ip access-list test
match: exact
- nxos_config:
lines:
- 10 permit ip 1.1.1.1/32 any log
- 20 permit ip 2.2.2.2/32 any log
- 30 permit ip 3.3.3.3/32 any log
- 40 permit ip 4.4.4.4/32 any log
- 10 permit ip 192.0.2.1/32 any log
- 20 permit ip 192.0.2.2/32 any log
- 30 permit ip 192.0.2.3/32 any log
- 40 permit ip 192.0.2.4/32 any log
parents: ip access-list test
before: no ip access-list test
replace: block

View file

@ -73,30 +73,30 @@ proposed:
description: k/v pairs of parameters passed into module
returned: always
type: dict
sample: {"address": "2.2.2.2", "key_id": "48",
sample: {"address": "192.0.2.2", "key_id": "48",
"peer_type": "server", "prefer": "enabled",
"source": "3.3.3.3", "source_type": "source"}
"source": "192.0.2.3", "source_type": "source"}
existing:
description:
- k/v pairs of existing ntp server/peer
returned: always
type: dict
sample: {"address": "2.2.2.2", "key_id": "32",
sample: {"address": "192.0.2.2", "key_id": "32",
"peer_type": "server", "prefer": "enabled",
"source": "ethernet2/1", "source_type": "source-interface"}
end_state:
description: k/v pairs of ntp info after module execution
returned: always
type: dict
sample: {"address": "2.2.2.2", "key_id": "48",
sample: {"address": "192.0.2.2", "key_id": "48",
"peer_type": "server", "prefer": "enabled",
"source": "3.3.3.3", "source_type": "source"}
"source": "192.0.2.3", "source_type": "source"}
updates:
description: command sent to the device
returned: always
type: list
sample: ["ntp server 2.2.2.2 prefer key 48",
"no ntp source-interface ethernet2/1", "ntp source 3.3.3.3"]
sample: ["ntp server 192.0.2.2 prefer key 48",
"no ntp source-interface ethernet2/1", "ntp source 192.0.2.3"]
changed:
description: check to see if a change was made on the device
returned: always

View file

@ -74,7 +74,7 @@ commands:
description: commands sent to the device
returned: always
type: list
sample: ["router bgp 65535", "vrf test", "router-id 1.1.1.1"]
sample: ["router bgp 65535", "vrf test", "router-id 192.0.2.1"]
'''

View file

@ -88,7 +88,7 @@ options:
EXAMPLES = '''
# ensure snmp host is configured
- nxos_snmp_host:
snmp_host: 3.3.3.3
snmp_host: 192.0.2.3
community: TESTING
state: present
'''
@ -98,7 +98,7 @@ commands:
description: commands sent to the device
returned: always
type: list
sample: ["snmp-server host 3.3.3.3 filter-vrf another_test_vrf"]
sample: ["snmp-server host 192.0.2.3 filter-vrf another_test_vrf"]
'''

View file

@ -74,7 +74,7 @@ options:
EXAMPLES = '''
- nxos_static_route:
prefix: "192.168.20.64/24"
next_hop: "3.3.3.3"
next_hop: "192.0.2.3"
route_name: testing
pref: 100
'''
@ -84,7 +84,7 @@ commands:
description: commands sent to the device
returned: always
type: list
sample: ["ip route 192.168.20.0/24 3.3.3.3 name testing 100"]
sample: ["ip route 192.168.20.0/24 192.0.2.3 name testing 100"]
'''
import re
from copy import deepcopy

View file

@ -65,7 +65,7 @@ EXAMPLES = """
- name: configure host logging
net_logging:
dest: host
name: 1.1.1.1
name: 192.0.2.1
facility: kernel
level: critical

View file

@ -4,21 +4,21 @@
- name: setup
asa_config:
lines:
- "clear configure tunnel-group 1.1.1.1"
- "clear configure tunnel-group 192.0.2.1"
provider: "{{ cli }}"
ignore_errors: yes
- name: Prepare tunnel-group
asa_config:
before: tunnel-group 1.1.1.1 type ipsec-l2l
before: tunnel-group 192.0.2.1 type ipsec-l2l
lines:
- "tunnel-group 1.1.1.1 ipsec-attributes"
- "tunnel-group 192.0.2.1 ipsec-attributes"
provider: "{{ cli }}"
- name: Setup tunnel-group
asa_config:
parents: tunnel-group 1.1.1.1 ipsec-attributes
parents: tunnel-group 192.0.2.1 ipsec-attributes
lines:
- "ikev1 pre-shared-key abc123"
passwords: yes
@ -26,7 +26,7 @@
- name: Test idempotency
asa_config:
parents: tunnel-group 1.1.1.1 ipsec-attributes
parents: tunnel-group 192.0.2.1 ipsec-attributes
lines:
- "ikev1 pre-shared-key abc123"
passwords: yes
@ -40,7 +40,7 @@
- name: teardown
asa_config:
lines:
- "clear configure tunnel-group 1.1.1.1"
- "clear configure tunnel-group 192.0.2.1"
provider: "{{ cli }}"

View file

@ -4,9 +4,9 @@
- name: setup
dellos10_config:
lines:
- seq 5 permit ip host 1.1.1.1 any count byte
- seq 10 permit ip host 2.2.2.2 any count byte
- seq 15 permit ip host 3.3.3.3 any count byte
- seq 5 permit ip host 192.0.2.1 any count byte
- seq 10 permit ip host 192.0.2.2 any count byte
- seq 15 permit ip host 192.0.2.3 any count byte
parents: ['ip access-list test']
before: ['no ip access-list test']
after: ['exit']
@ -16,10 +16,10 @@
- name: configure sub level command using block resplace
dellos10_config:
lines:
- seq 5 permit ip host 1.1.1.1 any count byte
- seq 10 permit ip host 2.2.2.2 any count byte
- seq 15 permit ip host 3.3.3.3 any count byte
- seq 20 permit ip host 4.4.4.4 any count byte
- seq 5 permit ip host 192.0.2.1 any count byte
- seq 10 permit ip host 192.0.2.2 any count byte
- seq 15 permit ip host 192.0.2.3 any count byte
- seq 20 permit ip host 192.0.2.4 any count byte
parents: ['ip access-list test']
replace: block
after: ['exit']
@ -30,18 +30,18 @@
that:
- "result.changed == true"
- "'ip access-list test' in result.updates"
- "'seq 5 permit ip host 1.1.1.1 any count byte' in result.updates"
- "'seq 10 permit ip host 2.2.2.2 any count byte' in result.updates"
- "'seq 15 permit ip host 3.3.3.3 any count byte' in result.updates"
- "'seq 20 permit ip host 4.4.4.4 any count byte' in result.updates"
- "'seq 5 permit ip host 192.0.2.1 any count byte' in result.updates"
- "'seq 10 permit ip host 192.0.2.2 any count byte' in result.updates"
- "'seq 15 permit ip host 192.0.2.3 any count byte' in result.updates"
- "'seq 20 permit ip host 192.0.2.4 any count byte' in result.updates"
- name: check sub level command using block replace
dellos10_config:
lines:
- seq 5 permit ip host 1.1.1.1 any count byte
- seq 10 permit ip host 2.2.2.2 any count byte
- seq 15 permit ip host 3.3.3.3 any count byte
- seq 20 permit ip host 4.4.4.4 any count byte
- seq 5 permit ip host 192.0.2.1 any count byte
- seq 10 permit ip host 192.0.2.2 any count byte
- seq 15 permit ip host 192.0.2.3 any count byte
- seq 20 permit ip host 192.0.2.4 any count byte
parents: ['ip access-list test']
replace: block
after: ['exit']

View file

@ -4,11 +4,11 @@
- name: setup
dellos10_config:
lines:
- seq 5 permit ip host 1.1.1.1 any count byte
- seq 10 permit ip host 2.2.2.2 any count byte
- seq 15 permit ip host 3.3.3.3 any count byte
- seq 20 permit ip host 4.4.4.4 any count byte
- seq 25 permit ip host 5.5.5.5 any count byte
- seq 5 permit ip host 192.0.2.1 any count byte
- seq 10 permit ip host 192.0.2.2 any count byte
- seq 15 permit ip host 192.0.2.3 any count byte
- seq 20 permit ip host 192.0.2.4 any count byte
- seq 25 permit ip host 192.0.2.5 any count byte
parents: ['ip access-list test']
before: ['no ip access-list test']
after: ['exit']
@ -18,10 +18,10 @@
- name: configure sub level command using exact match
dellos10_config:
lines:
- seq 5 permit ip host 1.1.1.1 any count byte
- seq 10 permit ip host 2.2.2.2 any count byte
- seq 15 permit ip host 3.3.3.3 any count byte
- seq 20 permit ip host 4.4.4.4 any count byte
- seq 5 permit ip host 192.0.2.1 any count byte
- seq 10 permit ip host 192.0.2.2 any count byte
- seq 15 permit ip host 192.0.2.3 any count byte
- seq 20 permit ip host 192.0.2.4 any count byte
parents: ['ip access-list test']
after: ['exit']
match: exact
@ -32,20 +32,20 @@
that:
- "result.changed == true"
- "'ip access-list test' in result.updates"
- "'seq 5 permit ip host 1.1.1.1 any count byte' in result.updates"
- "'seq 10 permit ip host 2.2.2.2 any count byte' in result.updates"
- "'seq 15 permit ip host 3.3.3.3 any count byte' in result.updates"
- "'seq 20 permit ip host 4.4.4.4 any count byte' in result.updates"
- "'seq 25 permit ip host 5.5.5.5 any count byte' not in result.updates"
- "'seq 5 permit ip host 192.0.2.1 any count byte' in result.updates"
- "'seq 10 permit ip host 192.0.2.2 any count byte' in result.updates"
- "'seq 15 permit ip host 192.0.2.3 any count byte' in result.updates"
- "'seq 20 permit ip host 192.0.2.4 any count byte' in result.updates"
- "'seq 25 permit ip host 192.0.2.5 any count byte' not in result.updates"
- name: check sub level command using exact match
dellos10_config:
lines:
- seq 5 permit ip host 1.1.1.1 any count byte
- seq 10 permit ip host 2.2.2.2 any count byte
- seq 15 permit ip host 3.3.3.3 any count byte
- seq 20 permit ip host 4.4.4.4 any count byte
- seq 25 permit ip host 5.5.5.5 any count byte
- seq 5 permit ip host 192.0.2.1 any count byte
- seq 10 permit ip host 192.0.2.2 any count byte
- seq 15 permit ip host 192.0.2.3 any count byte
- seq 20 permit ip host 192.0.2.4 any count byte
- seq 25 permit ip host 192.0.2.5 any count byte
parents: ['ip access-list test']
after: ['exit']
match: exact

View file

@ -4,11 +4,11 @@
- name: setup
dellos10_config:
lines:
- seq 5 permit ip host 1.1.1.1 any count byte
- seq 10 permit ip host 2.2.2.2 any count byte
- seq 15 permit ip host 3.3.3.3 any count byte
- seq 20 permit ip host 4.4.4.4 any count byte
- seq 25 permit ip host 5.5.5.5 any count byte
- seq 5 permit ip host 192.0.2.1 any count byte
- seq 10 permit ip host 192.0.2.2 any count byte
- seq 15 permit ip host 192.0.2.3 any count byte
- seq 20 permit ip host 192.0.2.4 any count byte
- seq 25 permit ip host 192.0.2.5 any count byte
parents: ['ip access-list test']
before: ['no ip access-list test']
after: ['exit']
@ -18,10 +18,10 @@
- name: configure sub level command using strict match
dellos10_config:
lines:
- seq 5 permit ip host 1.1.1.1 any count byte
- seq 10 permit ip host 2.2.2.2 any count byte
- seq 15 permit ip host 3.3.3.3 any count byte
- seq 20 permit ip host 4.4.4.4 any count byte
- seq 5 permit ip host 192.0.2.1 any count byte
- seq 10 permit ip host 192.0.2.2 any count byte
- seq 15 permit ip host 192.0.2.3 any count byte
- seq 20 permit ip host 192.0.2.4 any count byte
parents: ['ip access-list test']
match: strict
provider: "{{ cli }}"
@ -34,9 +34,9 @@
- name: check sub level command using strict match
dellos10_config:
lines:
- seq 5 permit ip host 1.1.1.1 any count byte
- seq 15 permit ip host 3.3.3.3 any count byte
- seq 10 permit ip host 2.2.2.2 any count byte
- seq 5 permit ip host 192.0.2.1 any count byte
- seq 15 permit ip host 192.0.2.3 any count byte
- seq 10 permit ip host 192.0.2.2 any count byte
parents: ['ip access-list test']
after: ['exit']
match: strict
@ -47,11 +47,11 @@
that:
- "result.changed == true"
- "'ip access-list test' in result.updates"
- "'seq 5 permit ip host 1.1.1.1 any count byte' not in result.updates"
- "'seq 10 permit ip host 2.2.2.2 any count byte' in result.updates"
- "'seq 15 permit ip host 3.3.3.3 any count byte' in result.updates"
- "'seq 20 permit ip host 4.4.4.4 any count byte' not in result.updates"
- "'seq 25 permit ip host 5.5.5.5 any count byte' not in result.updates"
- "'seq 5 permit ip host 192.0.2.1 any count byte' not in result.updates"
- "'seq 10 permit ip host 192.0.2.2 any count byte' in result.updates"
- "'seq 15 permit ip host 192.0.2.3 any count byte' in result.updates"
- "'seq 20 permit ip host 192.0.2.4 any count byte' not in result.updates"
- "'seq 25 permit ip host 192.0.2.5 any count byte' not in result.updates"
- name: teardown
dellos10_config:

View file

@ -4,9 +4,9 @@
- name: setup
dellos6_config:
lines:
- permit ip 1.1.1.1 0.0.0.0 any log
- permit ip 2.2.2.2 0.0.0.0 any log
- permit ip 3.3.3.3 0.0.0.0 any log
- permit ip 192.0.2.1 0.0.0.0 any log
- permit ip 192.0.2.2 0.0.0.0 any log
- permit ip 192.0.2.3 0.0.0.0 any log
parents: ['ip access-list test']
before: ['no ip access-list test']
after: ['exit']
@ -16,10 +16,10 @@
- name: configure sub level command using block resplace
dellos6_config:
lines:
- 1000 permit ip 1.1.1.1 0.0.0.0 any log
- 1010 permit ip 2.2.2.2 0.0.0.0 any log
- 1020 permit ip 3.3.3.3 0.0.0.0 any log
- 1030 permit ip 4.4.4.4 0.0.0.0 any log
- 1000 permit ip 192.0.2.1 0.0.0.0 any log
- 1010 permit ip 192.0.2.2 0.0.0.0 any log
- 1020 permit ip 192.0.2.3 0.0.0.0 any log
- 1030 permit ip 192.0.2.4 0.0.0.0 any log
parents: ['ip access-list test']
replace: block
after: ['exit']
@ -30,18 +30,18 @@
that:
- "result.changed == true"
- "'ip access-list test' in result.updates"
- "'1000 permit ip 1.1.1.1 0.0.0.0 any log' in result.updates"
- "'1010 permit ip 2.2.2.2 0.0.0.0 any log' in result.updates"
- "'1020 permit ip 3.3.3.3 0.0.0.0 any log' in result.updates"
- "'1030 permit ip 4.4.4.4 0.0.0.0 any log' in result.updates"
- "'1000 permit ip 192.0.2.1 0.0.0.0 any log' in result.updates"
- "'1010 permit ip 192.0.2.2 0.0.0.0 any log' in result.updates"
- "'1020 permit ip 192.0.2.3 0.0.0.0 any log' in result.updates"
- "'1030 permit ip 192.0.2.4 0.0.0.0 any log' in result.updates"
- name: check sub level command using block replace
dellos6_config:
lines:
- 1000 permit ip 1.1.1.1 0.0.0.0 any log
- 1010 permit ip 2.2.2.2 0.0.0.0 any log
- 1020 permit ip 3.3.3.3 0.0.0.0 any log
- 1030 permit ip 4.4.4.4 0.0.0.0 any log
- 1000 permit ip 192.0.2.1 0.0.0.0 any log
- 1010 permit ip 192.0.2.2 0.0.0.0 any log
- 1020 permit ip 192.0.2.3 0.0.0.0 any log
- 1030 permit ip 192.0.2.4 0.0.0.0 any log
parents: ['ip access-list test']
replace: block
after: ['exit']

View file

@ -4,11 +4,11 @@
- name: setup
dellos6_config:
lines:
- permit ip 1.1.1.1 0.0.0.0 any log
- permit ip 2.2.2.2 0.0.0.0 any log
- permit ip 3.3.3.3 0.0.0.0 any log
- permit ip 4.4.4.4 0.0.0.0 any log
- permit ip 5.5.5.5 0.0.0.0 any log
- permit ip 192.0.2.1 0.0.0.0 any log
- permit ip 192.0.2.2 0.0.0.0 any log
- permit ip 192.0.2.3 0.0.0.0 any log
- permit ip 192.0.2.4 0.0.0.0 any log
- permit ip 192.0.2.5 0.0.0.0 any log
parents: ['ip access-list test']
before: ['no ip access-list test']
after: ['exit']
@ -18,10 +18,10 @@
- name: configure sub level command using exact match
dellos6_config:
lines:
- 1000 permit ip 1.1.1.1 0.0.0.0 any log
- 1010 permit ip 2.2.2.2 0.0.0.0 any log
- 1020 permit ip 3.3.3.3 0.0.0.0 any log
- 1030 permit ip 4.4.4.4 0.0.0.0 any log
- 1000 permit ip 192.0.2.1 0.0.0.0 any log
- 1010 permit ip 192.0.2.2 0.0.0.0 any log
- 1020 permit ip 192.0.2.3 0.0.0.0 any log
- 1030 permit ip 192.0.2.4 0.0.0.0 any log
parents: ['ip access-list test']
after: ['exit']
match: exact
@ -32,20 +32,20 @@
that:
- "result.changed == true"
- "'ip access-list test' in result.updates"
- "'1000 permit ip 1.1.1.1 0.0.0.0 any log' in result.updates"
- "'1010 permit ip 2.2.2.2 0.0.0.0 any log' in result.updates"
- "'1020 permit ip 3.3.3.3 0.0.0.0 any log' in result.updates"
- "'1030 permit ip 4.4.4.4 0.0.0.0 any log' in result.updates"
- "'1040 permit ip 5.5.5.5 0.0.0.0 any log' not in result.updates"
- "'1000 permit ip 192.0.2.1 0.0.0.0 any log' in result.updates"
- "'1010 permit ip 192.0.2.2 0.0.0.0 any log' in result.updates"
- "'1020 permit ip 192.0.2.3 0.0.0.0 any log' in result.updates"
- "'1030 permit ip 192.0.2.4 0.0.0.0 any log' in result.updates"
- "'1040 permit ip 192.0.2.5 0.0.0.0 any log' not in result.updates"
- name: check sub level command using exact match
dellos6_config:
lines:
- 1000 permit ip 1.1.1.1 0.0.0.0 any log
- 1010 permit ip 2.2.2.2 0.0.0.0 any log
- 1020 permit ip 3.3.3.3 0.0.0.0 any log
- 1030 permit ip 4.4.4.4 0.0.0.0 any log
- 1040 permit ip 5.5.5.5 0.0.0.0 any log
- 1000 permit ip 192.0.2.1 0.0.0.0 any log
- 1010 permit ip 192.0.2.2 0.0.0.0 any log
- 1020 permit ip 192.0.2.3 0.0.0.0 any log
- 1030 permit ip 192.0.2.4 0.0.0.0 any log
- 1040 permit ip 192.0.2.5 0.0.0.0 any log
parents: ['ip access-list test']
after: ['exit']
match: exact

View file

@ -4,11 +4,11 @@
- name: setup
dellos6_config:
lines:
- permit ip 1.1.1.1 0.0.0.0 any log
- permit ip 2.2.2.2 0.0.0.0 any log
- permit ip 3.3.3.3 0.0.0.0 any log
- permit ip 4.4.4.4 0.0.0.0 any log
- permit ip 5.5.5.5 0.0.0.0 any log
- permit ip 192.0.2.1 0.0.0.0 any log
- permit ip 192.0.2.2 0.0.0.0 any log
- permit ip 192.0.2.3 0.0.0.0 any log
- permit ip 192.0.2.4 0.0.0.0 any log
- permit ip 192.0.2.5 0.0.0.0 any log
parents: ['ip access-list test']
before: ['no ip access-list test']
after: ['exit']
@ -18,10 +18,10 @@
- name: configure sub level command using strict match
dellos6_config:
lines:
- 1000 permit ip 1.1.1.1 0.0.0.0 any log
- 1010 permit ip 2.2.2.2 0.0.0.0 any log
- 1020 permit ip 3.3.3.3 0.0.0.0 any log
- 1030 permit ip 4.4.4.4 0.0.0.0 any log
- 1000 permit ip 192.0.2.1 0.0.0.0 any log
- 1010 permit ip 192.0.2.2 0.0.0.0 any log
- 1020 permit ip 192.0.2.3 0.0.0.0 any log
- 1030 permit ip 192.0.2.4 0.0.0.0 any log
parents: ['ip access-list test']
match: strict
provider: "{{ cli }}"
@ -34,9 +34,9 @@
- name: check sub level command using strict match
dellos6_config:
lines:
- 1000 permit ip 1.1.1.1 0.0.0.0 any log
- 1010 permit ip 3.3.3.3 0.0.0.0 any log
- 1020 permit ip 2.2.2.2 0.0.0.0 any log
- 1000 permit ip 192.0.2.1 0.0.0.0 any log
- 1010 permit ip 192.0.2.3 0.0.0.0 any log
- 1020 permit ip 192.0.2.2 0.0.0.0 any log
parents: ['ip access-list test']
after: ['exit']
match: strict
@ -47,11 +47,11 @@
that:
- "result.changed == true"
- "'ip access-list test' in result.updates"
- "'1000 permit ip 1.1.1.1 0.0.0.0 any log' not in result.updates"
- "'1020 permit ip 2.2.2.2 0.0.0.0 any log' in result.updates"
- "'1010 permit ip 3.3.3.3 0.0.0.0 any log' in result.updates"
- "'1030 permit ip 4.4.4.4 0.0.0.0 any log' not in result.updates"
- "'1040 permit ip 5.5.5.5 0.0.0.0 any log' not in result.updates"
- "'1000 permit ip 192.0.2.1 0.0.0.0 any log' not in result.updates"
- "'1020 permit ip 192.0.2.2 0.0.0.0 any log' in result.updates"
- "'1010 permit ip 192.0.2.3 0.0.0.0 any log' in result.updates"
- "'1030 permit ip 192.0.2.4 0.0.0.0 any log' not in result.updates"
- "'1040 permit ip 192.0.2.5 0.0.0.0 any log' not in result.updates"
- name: teardown
dellos6_config:

View file

@ -4,9 +4,9 @@
- name: setup
dellos9_config:
lines:
- seq 5 permit ip host 1.1.1.1 any log threshold-in-msgs 10 interval 5
- seq 10 permit ip host 2.2.2.2 any log threshold-in-msgs 10 interval 5
- seq 15 permit ip host 3.3.3.3 any log threshold-in-msgs 10 interval 5
- seq 5 permit ip host 192.0.2.1 any log threshold-in-msgs 10 interval 5
- seq 10 permit ip host 192.0.2.2 any log threshold-in-msgs 10 interval 5
- seq 15 permit ip host 192.0.2.3 any log threshold-in-msgs 10 interval 5
parents: ['ip access-list extended test']
before: ['no ip access-list extended test']
after: ['exit']
@ -16,10 +16,10 @@
- name: configure sub level command using block replace
dellos9_config:
lines:
- seq 5 permit ip host 1.1.1.1 any log threshold-in-msgs 10 interval 5
- seq 10 permit ip host 2.2.2.2 any log threshold-in-msgs 10 interval 5
- seq 15 permit ip host 3.3.3.3 any log threshold-in-msgs 10 interval 5
- seq 20 permit ip host 4.4.4.4 any log threshold-in-msgs 10 interval 5
- seq 5 permit ip host 192.0.2.1 any log threshold-in-msgs 10 interval 5
- seq 10 permit ip host 192.0.2.2 any log threshold-in-msgs 10 interval 5
- seq 15 permit ip host 192.0.2.3 any log threshold-in-msgs 10 interval 5
- seq 20 permit ip host 192.0.2.4 any log threshold-in-msgs 10 interval 5
parents: ['ip access-list extended test']
replace: block
after: ['exit']
@ -30,18 +30,18 @@
that:
- "result.changed == true"
- "'ip access-list extended test' in result.updates"
- "'seq 5 permit ip host 1.1.1.1 any log threshold-in-msgs 10 interval 5' in result.updates"
- "'seq 10 permit ip host 2.2.2.2 any log threshold-in-msgs 10 interval 5' in result.updates"
- "'seq 15 permit ip host 3.3.3.3 any log threshold-in-msgs 10 interval 5' in result.updates"
- "'seq 20 permit ip host 4.4.4.4 any log threshold-in-msgs 10 interval 5' in result.updates"
- "'seq 5 permit ip host 192.0.2.1 any log threshold-in-msgs 10 interval 5' in result.updates"
- "'seq 10 permit ip host 192.0.2.2 any log threshold-in-msgs 10 interval 5' in result.updates"
- "'seq 15 permit ip host 192.0.2.3 any log threshold-in-msgs 10 interval 5' in result.updates"
- "'seq 20 permit ip host 192.0.2.4 any log threshold-in-msgs 10 interval 5' in result.updates"
- name: check sub level command using block replace
dellos9_config:
lines:
- seq 5 permit ip host 1.1.1.1 any log threshold-in-msgs 10 interval 5
- seq 10 permit ip host 2.2.2.2 any log threshold-in-msgs 10 interval 5
- seq 15 permit ip host 3.3.3.3 any log threshold-in-msgs 10 interval 5
- seq 20 permit ip host 4.4.4.4 any log threshold-in-msgs 10 interval 5
- seq 5 permit ip host 192.0.2.1 any log threshold-in-msgs 10 interval 5
- seq 10 permit ip host 192.0.2.2 any log threshold-in-msgs 10 interval 5
- seq 15 permit ip host 192.0.2.3 any log threshold-in-msgs 10 interval 5
- seq 20 permit ip host 192.0.2.4 any log threshold-in-msgs 10 interval 5
parents: ['ip access-list extended test']
replace: block
after: ['exit']

View file

@ -4,11 +4,11 @@
- name: setup
dellos9_config:
lines:
- seq 5 permit ip host 1.1.1.1 any log threshold-in-msgs 10 interval 5
- seq 10 permit ip host 2.2.2.2 any log threshold-in-msgs 10 interval 5
- seq 15 permit ip host 3.3.3.3 any log threshold-in-msgs 10 interval 5
- seq 20 permit ip host 4.4.4.4 any log threshold-in-msgs 10 interval 5
- seq 25 permit ip host 5.5.5.5 any log threshold-in-msgs 10 interval 5
- seq 5 permit ip host 192.0.2.1 any log threshold-in-msgs 10 interval 5
- seq 10 permit ip host 192.0.2.2 any log threshold-in-msgs 10 interval 5
- seq 15 permit ip host 192.0.2.3 any log threshold-in-msgs 10 interval 5
- seq 20 permit ip host 192.0.2.4 any log threshold-in-msgs 10 interval 5
- seq 25 permit ip host 192.0.2.5 any log threshold-in-msgs 10 interval 5
parents: ['ip access-list extended test']
before: ['no ip access-list extended test']
after: ['exit']
@ -18,10 +18,10 @@
- name: configure sub level command using exact match
dellos9_config:
lines:
- seq 5 permit ip host 1.1.1.1 any log threshold-in-msgs 10 interval 5
- seq 10 permit ip host 2.2.2.2 any log threshold-in-msgs 10 interval 5
- seq 15 permit ip host 3.3.3.3 any log threshold-in-msgs 10 interval 5
- seq 20 permit ip host 4.4.4.4 any log threshold-in-msgs 10 interval 5
- seq 5 permit ip host 192.0.2.1 any log threshold-in-msgs 10 interval 5
- seq 10 permit ip host 192.0.2.2 any log threshold-in-msgs 10 interval 5
- seq 15 permit ip host 192.0.2.3 any log threshold-in-msgs 10 interval 5
- seq 20 permit ip host 192.0.2.4 any log threshold-in-msgs 10 interval 5
parents: ['ip access-list extended test']
after: ['exit']
match: exact
@ -32,20 +32,20 @@
that:
- "result.changed == true"
- "'ip access-list extended test' in result.updates"
- "'seq 5 permit ip host 1.1.1.1 any log threshold-in-msgs 10 interval 5' in result.updates"
- "'seq 10 permit ip host 2.2.2.2 any log threshold-in-msgs 10 interval 5' in result.updates"
- "'seq 15 permit ip host 3.3.3.3 any log threshold-in-msgs 10 interval 5' in result.updates"
- "'seq 20 permit ip host 4.4.4.4 any log threshold-in-msgs 10 interval 5' in result.updates"
- "'seq 25 permit ip host 5.5.5.5 any log threshold-in-msgs 10 interval 5' not in result.updates"
- "'seq 5 permit ip host 192.0.2.1 any log threshold-in-msgs 10 interval 5' in result.updates"
- "'seq 10 permit ip host 192.0.2.2 any log threshold-in-msgs 10 interval 5' in result.updates"
- "'seq 15 permit ip host 192.0.2.3 any log threshold-in-msgs 10 interval 5' in result.updates"
- "'seq 20 permit ip host 192.0.2.4 any log threshold-in-msgs 10 interval 5' in result.updates"
- "'seq 25 permit ip host 192.0.2.5 any log threshold-in-msgs 10 interval 5' not in result.updates"
- name: check sub level command using exact match
dellos9_config:
lines:
- seq 5 permit ip host 1.1.1.1 any log threshold-in-msgs 10 interval 5
- seq 10 permit ip host 2.2.2.2 any log threshold-in-msgs 10 interval 5
- seq 15 permit ip host 3.3.3.3 any log threshold-in-msgs 10 interval 5
- seq 20 permit ip host 4.4.4.4 any log threshold-in-msgs 10 interval 5
- seq 25 permit ip host 5.5.5.5 any log threshold-in-msgs 10 interval 5
- seq 5 permit ip host 192.0.2.1 any log threshold-in-msgs 10 interval 5
- seq 10 permit ip host 192.0.2.2 any log threshold-in-msgs 10 interval 5
- seq 15 permit ip host 192.0.2.3 any log threshold-in-msgs 10 interval 5
- seq 20 permit ip host 192.0.2.4 any log threshold-in-msgs 10 interval 5
- seq 25 permit ip host 192.0.2.5 any log threshold-in-msgs 10 interval 5
parents: ['ip access-list extended test']
after: ['exit']
match: exact

View file

@ -4,11 +4,11 @@
- name: setup
dellos9_config:
lines:
- seq 5 permit ip host 1.1.1.1 any log threshold-in-msgs 10 interval 5
- seq 10 permit ip host 2.2.2.2 any log threshold-in-msgs 10 interval 5
- seq 15 permit ip host 3.3.3.3 any log threshold-in-msgs 10 interval 5
- seq 20 permit ip host 4.4.4.4 any log threshold-in-msgs 10 interval 5
- seq 25 permit ip host 5.5.5.5 any log threshold-in-msgs 10 interval 5
- seq 5 permit ip host 192.0.2.1 any log threshold-in-msgs 10 interval 5
- seq 10 permit ip host 192.0.2.2 any log threshold-in-msgs 10 interval 5
- seq 15 permit ip host 192.0.2.3 any log threshold-in-msgs 10 interval 5
- seq 20 permit ip host 192.0.2.4 any log threshold-in-msgs 10 interval 5
- seq 25 permit ip host 192.0.2.5 any log threshold-in-msgs 10 interval 5
parents: ['ip access-list extended test']
before: ['no ip access-list extended test']
after: ['exit']
@ -18,10 +18,10 @@
- name: configure sub level command using strict match
dellos9_config:
lines:
- seq 5 permit ip host 1.1.1.1 any log threshold-in-msgs 10 interval 5
- seq 10 permit ip host 2.2.2.2 any log threshold-in-msgs 10 interval 5
- seq 15 permit ip host 3.3.3.3 any log threshold-in-msgs 10 interval 5
- seq 20 permit ip host 4.4.4.4 any log threshold-in-msgs 10 interval 5
- seq 5 permit ip host 192.0.2.1 any log threshold-in-msgs 10 interval 5
- seq 10 permit ip host 192.0.2.2 any log threshold-in-msgs 10 interval 5
- seq 15 permit ip host 192.0.2.3 any log threshold-in-msgs 10 interval 5
- seq 20 permit ip host 192.0.2.4 any log threshold-in-msgs 10 interval 5
parents: ['ip access-list extended test']
match: strict
provider: "{{ cli }}"
@ -34,9 +34,9 @@
- name: check sub level command using strict match
dellos9_config:
lines:
- seq 5 permit ip host 1.1.1.1 any log threshold-in-msgs 10 interval 5
- seq 10 permit ip host 3.3.3.3 any log threshold-in-msgs 10 interval 5
- seq 15 permit ip host 2.2.2.2 any log threshold-in-msgs 10 interval 5
- seq 5 permit ip host 192.0.2.1 any log threshold-in-msgs 10 interval 5
- seq 10 permit ip host 192.0.2.3 any log threshold-in-msgs 10 interval 5
- seq 15 permit ip host 192.0.2.2 any log threshold-in-msgs 10 interval 5
parents: ['ip access-list extended test']
after: ['exit']
match: strict
@ -47,11 +47,11 @@
that:
- "result.changed == true"
- "'ip access-list extended test' in result.updates"
- "'seq 5 permit ip host 1.1.1.1 any log threshold-in-msgs 10 interval 5' not in result.updates"
- "'seq 15 permit ip host 2.2.2.2 any log threshold-in-msgs 10 interval 5' in result.updates"
- "'seq 10 permit ip host 3.3.3.3 any log threshold-in-msgs 10 interval 5' in result.updates"
- "'seq 20 permit ip host 4.4.4.4 any log threshold-in-msgs 10 interval 5' not in result.updates"
- "'seq 25 permit ip host 5.5.5.5 any log threshold-in-msgs 10 interval 5' not in result.updates"
- "'seq 5 permit ip host 192.0.2.1 any log threshold-in-msgs 10 interval 5' not in result.updates"
- "'seq 15 permit ip host 192.0.2.2 any log threshold-in-msgs 10 interval 5' in result.updates"
- "'seq 10 permit ip host 192.0.2.3 any log threshold-in-msgs 10 interval 5' in result.updates"
- "'seq 20 permit ip host 192.0.2.4 any log threshold-in-msgs 10 interval 5' not in result.updates"
- "'seq 25 permit ip host 192.0.2.5 any log threshold-in-msgs 10 interval 5' not in result.updates"
- name: teardown
dellos9_config:

View file

@ -4,9 +4,9 @@
- name: setup
eos_config:
lines:
- 10 permit ip host 1.1.1.1 any log
- 20 permit ip host 2.2.2.2 any log
- 30 permit ip host 3.3.3.3 any log
- 10 permit ip host 192.0.2.1 any log
- 20 permit ip host 192.0.2.2 any log
- 30 permit ip host 192.0.2.3 any log
parents: ip access-list test
before: no ip access-list test
after: exit
@ -16,10 +16,10 @@
- name: configure sub level command using block resplace
eos_config:
lines:
- 10 permit ip host 1.1.1.1 any log
- 20 permit ip host 2.2.2.2 any log
- 30 permit ip host 3.3.3.3 any log
- 40 permit ip host 4.4.4.4 any log
- 10 permit ip host 192.0.2.1 any log
- 20 permit ip host 192.0.2.2 any log
- 30 permit ip host 192.0.2.3 any log
- 40 permit ip host 192.0.2.4 any log
parents: ip access-list test
replace: block
after: exit
@ -30,18 +30,18 @@
that:
- "result.changed == true"
- "'ip access-list test' in result.updates"
- "'10 permit ip host 1.1.1.1 any log' in result.updates"
- "'20 permit ip host 2.2.2.2 any log' in result.updates"
- "'30 permit ip host 3.3.3.3 any log' in result.updates"
- "'40 permit ip host 4.4.4.4 any log' in result.updates"
- "'10 permit ip host 192.0.2.1 any log' in result.updates"
- "'20 permit ip host 192.0.2.2 any log' in result.updates"
- "'30 permit ip host 192.0.2.3 any log' in result.updates"
- "'40 permit ip host 192.0.2.4 any log' in result.updates"
- name: check sub level command using block replace
eos_config:
lines:
- 10 permit ip host 1.1.1.1 any log
- 20 permit ip host 2.2.2.2 any log
- 30 permit ip host 3.3.3.3 any log
- 40 permit ip host 4.4.4.4 any log
- 10 permit ip host 192.0.2.1 any log
- 20 permit ip host 192.0.2.2 any log
- 30 permit ip host 192.0.2.3 any log
- 40 permit ip host 192.0.2.4 any log
parents: ip access-list test
replace: block
after: exit

View file

@ -4,11 +4,11 @@
- name: setup
eos_config:
lines:
- 10 permit ip host 1.1.1.1 any log
- 20 permit ip host 2.2.2.2 any log
- 30 permit ip host 3.3.3.3 any log
- 40 permit ip host 4.4.4.4 any log
- 50 permit ip host 5.5.5.5 any log
- 10 permit ip host 192.0.2.1 any log
- 20 permit ip host 192.0.2.2 any log
- 30 permit ip host 192.0.2.3 any log
- 40 permit ip host 192.0.2.4 any log
- 50 permit ip host 192.0.2.5 any log
parents: ip access-list test
before: no ip access-list test
after: exit
@ -18,10 +18,10 @@
- name: configure sub level command using exact match
eos_config:
lines:
- 10 permit ip host 1.1.1.1 any log
- 20 permit ip host 2.2.2.2 any log
- 30 permit ip host 3.3.3.3 any log
- 40 permit ip host 4.4.4.4 any log
- 10 permit ip host 192.0.2.1 any log
- 20 permit ip host 192.0.2.2 any log
- 30 permit ip host 192.0.2.3 any log
- 40 permit ip host 192.0.2.4 any log
parents: ip access-list test
before: no ip access-list test
after: exit
@ -34,19 +34,19 @@
that:
- "result.changed == true"
- "'ip access-list test' in result.updates"
- "'10 permit ip host 1.1.1.1 any log' in result.updates"
- "'20 permit ip host 2.2.2.2 any log' in result.updates"
- "'30 permit ip host 3.3.3.3 any log' in result.updates"
- "'40 permit ip host 4.4.4.4 any log' in result.updates"
- "'50 permit ip host 5.5.5.5 any log' not in result.updates"
- "'10 permit ip host 192.0.2.1 any log' in result.updates"
- "'20 permit ip host 192.0.2.2 any log' in result.updates"
- "'30 permit ip host 192.0.2.3 any log' in result.updates"
- "'40 permit ip host 192.0.2.4 any log' in result.updates"
- "'50 permit ip host 192.0.2.5 any log' not in result.updates"
- name: check sub level command using exact match
eos_config:
lines:
- 10 permit ip host 1.1.1.1 any log
- 20 permit ip host 2.2.2.2 any log
- 30 permit ip host 3.3.3.3 any log
- 40 permit ip host 4.4.4.4 any log
- 10 permit ip host 192.0.2.1 any log
- 20 permit ip host 192.0.2.2 any log
- 30 permit ip host 192.0.2.3 any log
- 40 permit ip host 192.0.2.4 any log
parents: ip access-list test
match: exact
become: yes

View file

@ -4,11 +4,11 @@
- name: setup
eos_config:
lines:
- 10 permit ip host 1.1.1.1 any log
- 20 permit ip host 2.2.2.2 any log
- 30 permit ip host 3.3.3.3 any log
- 40 permit ip host 4.4.4.4 any log
- 50 permit ip host 5.5.5.5 any log
- 10 permit ip host 192.0.2.1 any log
- 20 permit ip host 192.0.2.2 any log
- 30 permit ip host 192.0.2.3 any log
- 40 permit ip host 192.0.2.4 any log
- 50 permit ip host 192.0.2.5 any log
parents: ip access-list test
before: no ip access-list test
after: exit
@ -18,10 +18,10 @@
- name: configure sub level command using strict match
eos_config:
lines:
- 10 permit ip host 1.1.1.1 any log
- 20 permit ip host 3.3.3.3 any log
- 30 permit ip host 2.2.2.2 any log
- 40 permit ip host 4.4.4.4 any log
- 10 permit ip host 192.0.2.1 any log
- 20 permit ip host 192.0.2.3 any log
- 30 permit ip host 192.0.2.2 any log
- 40 permit ip host 192.0.2.4 any log
parents: ip access-list test
before: no ip access-list test
after: exit
@ -34,19 +34,19 @@
that:
- "result.changed == true"
- "'ip access-list test' in result.updates"
- "'10 permit ip host 1.1.1.1 any log' in result.updates"
- "'30 permit ip host 2.2.2.2 any log' in result.updates"
- "'20 permit ip host 3.3.3.3 any log' in result.updates"
- "'40 permit ip host 4.4.4.4 any log' in result.updates"
- "'50 permit ip host 5.5.5.5 any log' not in result.updates"
- "'10 permit ip host 192.0.2.1 any log' in result.updates"
- "'30 permit ip host 192.0.2.2 any log' in result.updates"
- "'20 permit ip host 192.0.2.3 any log' in result.updates"
- "'40 permit ip host 192.0.2.4 any log' in result.updates"
- "'50 permit ip host 192.0.2.5 any log' not in result.updates"
- name: check sub level command using strict match
eos_config:
lines:
- 10 permit ip host 1.1.1.1 any log
- 20 permit ip host 3.3.3.3 any log
- 30 permit ip host 2.2.2.2 any log
- 40 permit ip host 4.4.4.4 any log
- 10 permit ip host 192.0.2.1 any log
- 20 permit ip host 192.0.2.3 any log
- 30 permit ip host 192.0.2.2 any log
- 40 permit ip host 192.0.2.4 any log
parents: ip access-list test
match: strict
become: yes

View file

@ -4,9 +4,9 @@
- name: setup
eos_config:
lines:
- 10 permit ip host 1.1.1.1 any log
- 20 permit ip host 2.2.2.2 any log
- 30 permit ip host 3.3.3.3 any log
- 10 permit ip host 192.0.2.1 any log
- 20 permit ip host 192.0.2.2 any log
- 30 permit ip host 192.0.2.3 any log
parents: ip access-list test
before: no ip access-list test
match: none
@ -15,10 +15,10 @@
- name: configure sub level command using block resplace
eos_config:
lines:
- 10 permit ip host 1.1.1.1 any log
- 20 permit ip host 2.2.2.2 any log
- 30 permit ip host 3.3.3.3 any log
- 40 permit ip host 4.4.4.4 any log
- 10 permit ip host 192.0.2.1 any log
- 20 permit ip host 192.0.2.2 any log
- 30 permit ip host 192.0.2.3 any log
- 40 permit ip host 192.0.2.4 any log
parents: ip access-list test
after: end
replace: block
@ -29,18 +29,18 @@
that:
- "result.changed == true"
- "'ip access-list test' in result.updates"
- "'10 permit ip host 1.1.1.1 any log' in result.updates"
- "'20 permit ip host 2.2.2.2 any log' in result.updates"
- "'30 permit ip host 3.3.3.3 any log' in result.updates"
- "'40 permit ip host 4.4.4.4 any log' in result.updates"
- "'10 permit ip host 192.0.2.1 any log' in result.updates"
- "'20 permit ip host 192.0.2.2 any log' in result.updates"
- "'30 permit ip host 192.0.2.3 any log' in result.updates"
- "'40 permit ip host 192.0.2.4 any log' in result.updates"
- name: check sub level command using block replace
eos_config:
lines:
- 10 permit ip host 1.1.1.1 any log
- 20 permit ip host 2.2.2.2 any log
- 30 permit ip host 3.3.3.3 any log
- 40 permit ip host 4.4.4.4 any log
- 10 permit ip host 192.0.2.1 any log
- 20 permit ip host 192.0.2.2 any log
- 30 permit ip host 192.0.2.3 any log
- 40 permit ip host 192.0.2.4 any log
parents: ip access-list test
replace: block
become: yes

View file

@ -4,11 +4,11 @@
- name: setup
eos_config:
lines:
- 10 permit ip host 1.1.1.1 any log
- 20 permit ip host 2.2.2.2 any log
- 30 permit ip host 3.3.3.3 any log
- 40 permit ip host 4.4.4.4 any log
- 50 permit ip host 5.5.5.5 any log
- 10 permit ip host 192.0.2.1 any log
- 20 permit ip host 192.0.2.2 any log
- 30 permit ip host 192.0.2.3 any log
- 40 permit ip host 192.0.2.4 any log
- 50 permit ip host 192.0.2.5 any log
parents: ip access-list test
before: no ip access-list test
after: exit
@ -18,10 +18,10 @@
- name: configure sub level command using exact match
eos_config:
lines:
- 10 permit ip host 1.1.1.1 any log
- 20 permit ip host 2.2.2.2 any log
- 30 permit ip host 3.3.3.3 any log
- 40 permit ip host 4.4.4.4 any log
- 10 permit ip host 192.0.2.1 any log
- 20 permit ip host 192.0.2.2 any log
- 30 permit ip host 192.0.2.3 any log
- 40 permit ip host 192.0.2.4 any log
parents: ip access-list test
before: no ip access-list test
after: exit
@ -33,19 +33,19 @@
that:
- "result.changed == true"
- "'ip access-list test' in result.updates"
- "'10 permit ip host 1.1.1.1 any log' in result.updates"
- "'20 permit ip host 2.2.2.2 any log' in result.updates"
- "'30 permit ip host 3.3.3.3 any log' in result.updates"
- "'40 permit ip host 4.4.4.4 any log' in result.updates"
- "'50 permit ip host 5.5.5.5 any log' not in result.updates"
- "'10 permit ip host 192.0.2.1 any log' in result.updates"
- "'20 permit ip host 192.0.2.2 any log' in result.updates"
- "'30 permit ip host 192.0.2.3 any log' in result.updates"
- "'40 permit ip host 192.0.2.4 any log' in result.updates"
- "'50 permit ip host 192.0.2.5 any log' not in result.updates"
- name: check sub level command using exact match
eos_config:
lines:
- 10 permit ip host 1.1.1.1 any log
- 20 permit ip host 2.2.2.2 any log
- 30 permit ip host 3.3.3.3 any log
- 40 permit ip host 4.4.4.4 any log
- 10 permit ip host 192.0.2.1 any log
- 20 permit ip host 192.0.2.2 any log
- 30 permit ip host 192.0.2.3 any log
- 40 permit ip host 192.0.2.4 any log
before: no ip access-list test
parents: ip access-list test
match: exact

View file

@ -4,11 +4,11 @@
- name: setup
eos_config:
lines:
- 10 permit ip host 1.1.1.1 any log
- 20 permit ip host 2.2.2.2 any log
- 30 permit ip host 3.3.3.3 any log
- 40 permit ip host 4.4.4.4 any log
- 50 permit ip host 5.5.5.5 any log
- 10 permit ip host 192.0.2.1 any log
- 20 permit ip host 192.0.2.2 any log
- 30 permit ip host 192.0.2.3 any log
- 40 permit ip host 192.0.2.4 any log
- 50 permit ip host 192.0.2.5 any log
parents: ip access-list test
before: no ip access-list test
match: none
@ -17,10 +17,10 @@
- name: configure sub level command using strict match
eos_config:
lines:
- 10 permit ip host 1.1.1.1 any log
- 20 permit ip host 3.3.3.3 any log
- 30 permit ip host 2.2.2.2 any log
- 40 permit ip host 4.4.4.4 any log
- 10 permit ip host 192.0.2.1 any log
- 20 permit ip host 192.0.2.3 any log
- 30 permit ip host 192.0.2.2 any log
- 40 permit ip host 192.0.2.4 any log
parents: ip access-list test
before: no ip access-list test
after: exit
@ -33,19 +33,19 @@
that:
- "result.changed == true"
- "'ip access-list test' in result.updates"
- "'10 permit ip host 1.1.1.1 any log' in result.updates"
- "'30 permit ip host 2.2.2.2 any log' in result.updates"
- "'20 permit ip host 3.3.3.3 any log' in result.updates"
- "'40 permit ip host 4.4.4.4 any log' in result.updates"
- "'50 permit ip host 5.5.5.5 any log' not in result.updates"
- "'10 permit ip host 192.0.2.1 any log' in result.updates"
- "'30 permit ip host 192.0.2.2 any log' in result.updates"
- "'20 permit ip host 192.0.2.3 any log' in result.updates"
- "'40 permit ip host 192.0.2.4 any log' in result.updates"
- "'50 permit ip host 192.0.2.5 any log' not in result.updates"
- name: check sub level command using strict match
eos_config:
lines:
- 10 permit ip host 1.1.1.1 any log
- 20 permit ip host 3.3.3.3 any log
- 30 permit ip host 2.2.2.2 any log
- 40 permit ip host 4.4.4.4 any log
- 10 permit ip host 192.0.2.1 any log
- 20 permit ip host 192.0.2.3 any log
- 30 permit ip host 192.0.2.2 any log
- 40 permit ip host 192.0.2.4 any log
parents: ip access-list test
match: strict
become: yes

View file

@ -49,9 +49,9 @@
- name: setup
eos_config:
lines:
- 10 permit ip host 1.1.1.1 any log
- 20 permit ip host 2.2.2.2 any log
- 30 permit ip host 3.3.3.3 any log
- 10 permit ip host 192.0.2.1 any log
- 20 permit ip host 192.0.2.2 any log
- 30 permit ip host 192.0.2.3 any log
parents: ip access-list test
before: no ip access-list test
after: exit
@ -62,10 +62,10 @@
- name: configure sub level command using block replace
eos_config:
lines:
- 10 permit ip host 1.1.1.1 any log
- 20 permit ip host 2.2.2.2 any log
- 30 permit ip host 3.3.3.3 any log
- 40 permit ip host 4.4.4.4 any log
- 10 permit ip host 192.0.2.1 any log
- 20 permit ip host 192.0.2.2 any log
- 30 permit ip host 192.0.2.3 any log
- 40 permit ip host 192.0.2.4 any log
parents: ip access-list test
replace: block
after: exit
@ -78,18 +78,18 @@
that:
- "result.changed == true"
- "'ip access-list test' in result.updates"
- "'10 permit ip host 1.1.1.1 any log' in result.updates"
- "'20 permit ip host 2.2.2.2 any log' in result.updates"
- "'30 permit ip host 3.3.3.3 any log' in result.updates"
- "'40 permit ip host 4.4.4.4 any log' in result.updates"
- "'10 permit ip host 192.0.2.1 any log' in result.updates"
- "'20 permit ip host 192.0.2.2 any log' in result.updates"
- "'30 permit ip host 192.0.2.3 any log' in result.updates"
- "'40 permit ip host 192.0.2.4 any log' in result.updates"
- name: check sub level command using block replace
eos_config:
lines:
- 10 permit ip host 1.1.1.1 any log
- 20 permit ip host 2.2.2.2 any log
- 30 permit ip host 3.3.3.3 any log
- 40 permit ip host 4.4.4.4 any log
- 10 permit ip host 192.0.2.1 any log
- 20 permit ip host 192.0.2.2 any log
- 30 permit ip host 192.0.2.3 any log
- 40 permit ip host 192.0.2.4 any log
parents: ip access-list test
replace: block
after: exit

View file

@ -49,9 +49,9 @@
- name: setup
eos_config:
lines:
- 10 permit ip host 1.1.1.1 any log
- 20 permit ip host 2.2.2.2 any log
- 30 permit ip host 3.3.3.3 any log
- 10 permit ip host 192.0.2.1 any log
- 20 permit ip host 192.0.2.2 any log
- 30 permit ip host 192.0.2.3 any log
parents: ip access-list test
before: no ip access-list test
after: exit
@ -62,10 +62,10 @@
- name: configure sub level command using block replace
eos_config:
lines:
- 10 permit ip host 1.1.1.1 any log
- 20 permit ip host 2.2.2.2 any log
- 30 permit ip host 3.3.3.3 any log
- 40 permit ip host 4.4.4.4 any log
- 10 permit ip host 192.0.2.1 any log
- 20 permit ip host 192.0.2.2 any log
- 30 permit ip host 192.0.2.3 any log
- 40 permit ip host 192.0.2.4 any log
parents: ip access-list test
replace: block
after: exit
@ -78,18 +78,18 @@
that:
- "result.changed == true"
- "'ip access-list test' in result.updates"
- "'10 permit ip host 1.1.1.1 any log' in result.updates"
- "'20 permit ip host 2.2.2.2 any log' in result.updates"
- "'30 permit ip host 3.3.3.3 any log' in result.updates"
- "'40 permit ip host 4.4.4.4 any log' in result.updates"
- "'10 permit ip host 192.0.2.1 any log' in result.updates"
- "'20 permit ip host 192.0.2.2 any log' in result.updates"
- "'30 permit ip host 192.0.2.3 any log' in result.updates"
- "'40 permit ip host 192.0.2.4 any log' in result.updates"
- name: check sub level command using block replace
eos_config:
lines:
- 10 permit ip host 1.1.1.1 any log
- 20 permit ip host 2.2.2.2 any log
- 30 permit ip host 3.3.3.3 any log
- 40 permit ip host 4.4.4.4 any log
- 10 permit ip host 192.0.2.1 any log
- 20 permit ip host 192.0.2.2 any log
- 30 permit ip host 192.0.2.3 any log
- 40 permit ip host 192.0.2.4 any log
parents: ip access-list test
replace: block
after: exit

View file

@ -12,9 +12,9 @@
- name: configure name_servers
eos_system:
name_servers:
- 1.1.1.1
- 2.2.2.2
- 3.3.3.3
- 192.0.2.1
- 192.0.2.2
- 192.0.2.3
become: yes
register: result
@ -22,16 +22,16 @@
that:
- result.changed == true
- result.commands|length == 3
- "'ip name-server 1.1.1.1' in result.commands"
- "'ip name-server 2.2.2.2' in result.commands"
- "'ip name-server 3.3.3.3' in result.commands"
- "'ip name-server 192.0.2.1' in result.commands"
- "'ip name-server 192.0.2.2' in result.commands"
- "'ip name-server 192.0.2.3' in result.commands"
- name: verify name_servers
eos_system:
name_servers:
- 1.1.1.1
- 2.2.2.2
- 3.3.3.3
- 192.0.2.1
- 192.0.2.2
- 192.0.2.3
become: yes
register: result
@ -42,9 +42,9 @@
#- name: change to vrf
# eos_system:
# name_servers:
# - 1.1.1.1
# - { server: 2.2.2.2, vrf: ansible }
# - 3.3.3.3
# - 192.0.2.1
# - { server: 192.0.2.2, vrf: ansible }
# - 192.0.2.3
# become: yes
# register: result
@ -52,15 +52,15 @@
# that:
# - result.changed == true
# - result.commands|length == 2
# - "'no ip name-server 2.2.2.2' in result.commands"
# - "'ip name-server 2.2.2.2 vrf ansible' in result.commands"
# - "'no ip name-server 192.0.2.2' in result.commands"
# - "'ip name-server 192.0.2.2 vrf ansible' in result.commands"
#- name: verify change to vrf
# eos_system:
# name_servers:
# - 1.1.1.1
# - { server: 2.2.2.2, vrf: ansible }
# - 3.3.3.3
# - 192.0.2.1
# - { server: 192.0.2.2, vrf: ansible }
# - 192.0.2.3
# become: yes
# register: result
#
@ -71,8 +71,8 @@
- name: remove one
eos_system:
name_servers:
- 1.1.1.1
- 2.2.2.2
- 192.0.2.1
- 192.0.2.2
become: yes
register: result
@ -80,7 +80,7 @@
that:
- result.changed == true
- result.commands|length == 1
- "'no ip name-server 3.3.3.3' in result.commands"
- "'no ip name-server 192.0.2.3' in result.commands"
- name: teardown
eos_config:

View file

@ -12,9 +12,9 @@
- name: configure name_servers
eos_system:
name_servers:
- 1.1.1.1
- 2.2.2.2
- 3.3.3.3
- 192.0.2.1
- 192.0.2.2
- 192.0.2.3
become: yes
register: result
@ -22,16 +22,16 @@
that:
- result.changed == true
- result.commands|length == 3
- "'ip name-server 1.1.1.1' in result.commands"
- "'ip name-server 2.2.2.2' in result.commands"
- "'ip name-server 3.3.3.3' in result.commands"
- "'ip name-server 192.0.2.1' in result.commands"
- "'ip name-server 192.0.2.2' in result.commands"
- "'ip name-server 192.0.2.3' in result.commands"
- name: verify name_servers
eos_system:
name_servers:
- 1.1.1.1
- 2.2.2.2
- 3.3.3.3
- 192.0.2.1
- 192.0.2.2
- 192.0.2.3
become: yes
register: result
@ -42,9 +42,9 @@
#- name: change to vrf
# eos_system:
# name_servers:
# - 1.1.1.1
# - { server: 2.2.2.2, vrf: ansible }
# - 3.3.3.3
# - 192.0.2.1
# - { server: 192.0.2.2, vrf: ansible }
# - 192.0.2.3
# become: yes
# register: result
@ -52,15 +52,15 @@
# that:
# - result.changed == true
# - result.commands|length == 2
# - "'no ip name-server 2.2.2.2' in result.commands"
# - "'ip name-server 2.2.2.2 vrf ansible' in result.commands"
# - "'no ip name-server 192.0.2.2' in result.commands"
# - "'ip name-server 192.0.2.2 vrf ansible' in result.commands"
#- name: verify change to vrf
# eos_system:
# name_servers:
# - 1.1.1.1
# - { server: 2.2.2.2, vrf: ansible }
# - 3.3.3.3
# - 192.0.2.1
# - { server: 192.0.2.2, vrf: ansible }
# - 192.0.2.3
# become: yes
# register: result
#
@ -71,8 +71,8 @@
- name: remove one
eos_system:
name_servers:
- 1.1.1.1
- 2.2.2.2
- 192.0.2.1
- 192.0.2.2
become: yes
register: result
@ -80,7 +80,7 @@
that:
- result.changed == true
- result.commands|length == 1
- "'no ip name-server 3.3.3.3' in result.commands"
- "'no ip name-server 192.0.2.3' in result.commands"
- name: teardown
eos_config:

View file

@ -4,9 +4,9 @@
- name: setup
ios_config:
lines:
- permit ip host 1.1.1.1 any log
- permit ip host 2.2.2.2 any log
- permit ip host 3.3.3.3 any log
- permit ip host 192.0.2.1 any log
- permit ip host 192.0.2.2 any log
- permit ip host 192.0.2.3 any log
parents: ['ip access-list extended test']
before: ['no ip access-list extended test']
after: ['exit']
@ -16,10 +16,10 @@
- name: configure sub level command using block resplace
ios_config:
lines:
- permit ip host 1.1.1.1 any log
- permit ip host 2.2.2.2 any log
- permit ip host 3.3.3.3 any log
- permit ip host 4.4.4.4 any log
- permit ip host 192.0.2.1 any log
- permit ip host 192.0.2.2 any log
- permit ip host 192.0.2.3 any log
- permit ip host 192.0.2.4 any log
parents: ['ip access-list extended test']
replace: block
after: ['exit']
@ -30,18 +30,18 @@
that:
- "result.changed == true"
- "'ip access-list extended test' in result.updates"
- "'permit ip host 1.1.1.1 any log' in result.updates"
- "'permit ip host 2.2.2.2 any log' in result.updates"
- "'permit ip host 3.3.3.3 any log' in result.updates"
- "'permit ip host 4.4.4.4 any log' in result.updates"
- "'permit ip host 192.0.2.1 any log' in result.updates"
- "'permit ip host 192.0.2.2 any log' in result.updates"
- "'permit ip host 192.0.2.3 any log' in result.updates"
- "'permit ip host 192.0.2.4 any log' in result.updates"
- name: check sub level command using block replace
ios_config:
lines:
- permit ip host 1.1.1.1 any log
- permit ip host 2.2.2.2 any log
- permit ip host 3.3.3.3 any log
- permit ip host 4.4.4.4 any log
- permit ip host 192.0.2.1 any log
- permit ip host 192.0.2.2 any log
- permit ip host 192.0.2.3 any log
- permit ip host 192.0.2.4 any log
parents: ['ip access-list extended test']
replace: block
after: ['exit']

View file

@ -4,11 +4,11 @@
- name: setup
ios_config:
lines:
- permit ip host 1.1.1.1 any log
- permit ip host 2.2.2.2 any log
- permit ip host 3.3.3.3 any log
- permit ip host 4.4.4.4 any log
- permit ip host 5.5.5.5 any log
- permit ip host 192.0.2.1 any log
- permit ip host 192.0.2.2 any log
- permit ip host 192.0.2.3 any log
- permit ip host 192.0.2.4 any log
- permit ip host 192.0.2.5 any log
parents: ip access-list extended test
before: no ip access-list extended test
after: exit
@ -18,10 +18,10 @@
- name: configure sub level command using exact match
ios_config:
lines:
- permit ip host 1.1.1.1 any log
- permit ip host 2.2.2.2 any log
- permit ip host 3.3.3.3 any log
- permit ip host 4.4.4.4 any log
- permit ip host 192.0.2.1 any log
- permit ip host 192.0.2.2 any log
- permit ip host 192.0.2.3 any log
- permit ip host 192.0.2.4 any log
parents: ip access-list extended test
before: no ip access-list extended test
after: exit
@ -33,19 +33,19 @@
that:
- "result.changed == true"
- "'ip access-list extended test' in result.updates"
- "'permit ip host 1.1.1.1 any log' in result.updates"
- "'permit ip host 2.2.2.2 any log' in result.updates"
- "'permit ip host 3.3.3.3 any log' in result.updates"
- "'permit ip host 4.4.4.4 any log' in result.updates"
- "'permit ip host 5.5.5.5 any log' not in result.updates"
- "'permit ip host 192.0.2.1 any log' in result.updates"
- "'permit ip host 192.0.2.2 any log' in result.updates"
- "'permit ip host 192.0.2.3 any log' in result.updates"
- "'permit ip host 192.0.2.4 any log' in result.updates"
- "'permit ip host 192.0.2.5 any log' not in result.updates"
- name: check sub level command using exact match
ios_config:
lines:
- permit ip host 1.1.1.1 any log
- permit ip host 2.2.2.2 any log
- permit ip host 3.3.3.3 any log
- permit ip host 4.4.4.4 any log
- permit ip host 192.0.2.1 any log
- permit ip host 192.0.2.2 any log
- permit ip host 192.0.2.3 any log
- permit ip host 192.0.2.4 any log
parents: ip access-list extended test
match: exact
provider: "{{ cli }}"

View file

@ -4,11 +4,11 @@
- name: setup
ios_config:
lines:
- permit ip host 1.1.1.1 any log
- permit ip host 2.2.2.2 any log
- permit ip host 3.3.3.3 any log
- permit ip host 4.4.4.4 any log
- permit ip host 5.5.5.5 any log
- permit ip host 192.0.2.1 any log
- permit ip host 192.0.2.2 any log
- permit ip host 192.0.2.3 any log
- permit ip host 192.0.2.4 any log
- permit ip host 192.0.2.5 any log
parents: ip access-list extended test
before: no ip access-list extended test
match: none
@ -17,10 +17,10 @@
- name: configure sub level command using strict match
ios_config:
lines:
- permit ip host 1.1.1.1 any log
- permit ip host 2.2.2.2 any log
- permit ip host 3.3.3.3 any log
- permit ip host 4.4.4.4 any log
- permit ip host 192.0.2.1 any log
- permit ip host 192.0.2.2 any log
- permit ip host 192.0.2.3 any log
- permit ip host 192.0.2.4 any log
parents: ip access-list extended test
match: strict
provider: "{{ cli }}"
@ -33,9 +33,9 @@
- name: check sub level command using strict match
ios_config:
lines:
- permit ip host 1.1.1.1 any log
- permit ip host 3.3.3.3 any log
- permit ip host 2.2.2.2 any log
- permit ip host 192.0.2.1 any log
- permit ip host 192.0.2.3 any log
- permit ip host 192.0.2.2 any log
parents: ip access-list extended test
after: exit
match: strict
@ -46,11 +46,11 @@
that:
- "result.changed == true"
- "'ip access-list extended test' in result.updates"
- "'permit ip host 1.1.1.1 any log' not in result.updates"
- "'permit ip host 2.2.2.2 any log' in result.updates"
- "'permit ip host 3.3.3.3 any log' in result.updates"
- "'permit ip host 4.4.4.4 any log' not in result.updates"
- "'permit ip host 5.5.5.5 any log' not in result.updates"
- "'permit ip host 192.0.2.1 any log' not in result.updates"
- "'permit ip host 192.0.2.2 any log' in result.updates"
- "'permit ip host 192.0.2.3 any log' in result.updates"
- "'permit ip host 192.0.2.4 any log' not in result.updates"
- "'permit ip host 192.0.2.5 any log' not in result.updates"
- name: teardown
ios_config:

View file

@ -42,9 +42,9 @@
- name: setup test NetworkConfig.difference, replace=block
ios_config:
lines:
- permit ip host 1.1.1.1 any log
- permit ip host 2.2.2.2 any log
- permit ip host 3.3.3.3 any log
- permit ip host 192.0.2.1 any log
- permit ip host 192.0.2.2 any log
- permit ip host 192.0.2.3 any log
parents: ['ip access-list extended test']
before: ['no ip access-list extended test']
after: ['exit']
@ -54,10 +54,10 @@
- name: test NetworkConfig.difference, replace=block
ios_config:
lines:
- permit ip host 1.1.1.1 any log
- permit ip host 2.2.2.2 any log
- permit ip host 3.3.3.3 any log
- permit ip host 4.4.4.4 any log
- permit ip host 192.0.2.1 any log
- permit ip host 192.0.2.2 any log
- permit ip host 192.0.2.3 any log
- permit ip host 192.0.2.4 any log
parents: ['ip access-list extended test']
replace: block
after: ['exit']
@ -68,10 +68,10 @@
that:
- "result.changed == true"
- "'ip access-list extended test' in result.updates"
- "'permit ip host 1.1.1.1 any log' in result.updates"
- "'permit ip host 2.2.2.2 any log' in result.updates"
- "'permit ip host 3.3.3.3 any log' in result.updates"
- "'permit ip host 4.4.4.4 any log' in result.updates"
- "'permit ip host 192.0.2.1 any log' in result.updates"
- "'permit ip host 192.0.2.2 any log' in result.updates"
- "'permit ip host 192.0.2.3 any log' in result.updates"
- "'permit ip host 192.0.2.4 any log' in result.updates"
- name: teardown- NetworkConfig.difference, replace=block
ios_config:

View file

@ -11,9 +11,9 @@
- name: configure name_servers
ios_system:
name_servers:
- 1.1.1.1
- 2.2.2.2
- 3.3.3.3
- 192.0.2.1
- 192.0.2.2
- 192.0.2.3
provider: "{{ cli }}"
register: result
@ -21,16 +21,16 @@
that:
- result.changed == true
- result.commands|length == 3
- "'ip name-server 1.1.1.1' in result.commands"
- "'ip name-server 2.2.2.2' in result.commands"
- "'ip name-server 3.3.3.3' in result.commands"
- "'ip name-server 192.0.2.1' in result.commands"
- "'ip name-server 192.0.2.2' in result.commands"
- "'ip name-server 192.0.2.3' in result.commands"
- name: verify name_servers
ios_system:
name_servers:
- 1.1.1.1
- 2.2.2.2
- 3.3.3.3
- 192.0.2.1
- 192.0.2.2
- 192.0.2.3
provider: "{{ cli }}"
register: result
@ -41,9 +41,9 @@
#- name: change to vrf
# ios_system:
# name_servers:
# - 1.1.1.1
# - { server: 2.2.2.2, vrf: ansible }
# - 3.3.3.3
# - 192.0.2.1
# - { server: 192.0.2.2, vrf: ansible }
# - 192.0.2.3
# provider: "{{ cli }}"
# register: result
@ -51,15 +51,15 @@
# that:
# - result.changed == true
# - result.commands|length == 2
# - "'no ip name-server 2.2.2.2' in result.commands"
# - "'ip name-server 2.2.2.2 vrf ansible' in result.commands"
# - "'no ip name-server 192.0.2.2' in result.commands"
# - "'ip name-server 192.0.2.2 vrf ansible' in result.commands"
#- name: verify change to vrf
# ios_system:
# name_servers:
# - 1.1.1.1
# - { server: 2.2.2.2, vrf: ansible }
# - 3.3.3.3
# - 192.0.2.1
# - { server: 192.0.2.2, vrf: ansible }
# - 192.0.2.3
# provider: "{{ cli }}"
# register: result
#
@ -70,8 +70,8 @@
- name: remove one
ios_system:
name_servers:
- 1.1.1.1
- 2.2.2.2
- 192.0.2.1
- 192.0.2.2
provider: "{{ cli }}"
register: result
@ -79,7 +79,7 @@
that:
- result.changed == true
- result.commands|length == 1
- "'no ip name-server 3.3.3.3' in result.commands"
- "'no ip name-server 192.0.2.3' in result.commands"
- name: teardown
ios_config:

View file

@ -4,9 +4,9 @@
- name: setup
iosxr_config:
commands:
- 10 permit ipv4 host 1.1.1.1 any log
- 20 permit ipv4 host 2.2.2.2 any log
- 30 permit ipv4 host 3.3.3.3 any log
- 10 permit ipv4 host 192.0.2.1 any log
- 20 permit ipv4 host 192.0.2.2 any log
- 30 permit ipv4 host 192.0.2.3 any log
parents: ['ipv4 access-list test']
before: ['no ipv4 access-list test']
match: none
@ -14,10 +14,10 @@
- name: configure sub level command using block resplace
iosxr_config:
commands:
- 10 permit ipv4 host 1.1.1.1 any log
- 20 permit ipv4 host 2.2.2.2 any log
- 30 permit ipv4 host 3.3.3.3 any log
- 40 permit ipv4 host 4.4.4.4 any log
- 10 permit ipv4 host 192.0.2.1 any log
- 20 permit ipv4 host 192.0.2.2 any log
- 30 permit ipv4 host 192.0.2.3 any log
- 40 permit ipv4 host 192.0.2.4 any log
parents: ['ipv4 access-list test']
replace: block
register: result
@ -26,18 +26,18 @@
that:
- "result.changed == true"
- "'ipv4 access-list test' in result.commands"
- "'10 permit ipv4 host 1.1.1.1 any log' in result.commands"
- "'20 permit ipv4 host 2.2.2.2 any log' in result.commands"
- "'30 permit ipv4 host 3.3.3.3 any log' in result.commands"
- "'40 permit ipv4 host 4.4.4.4 any log' in result.commands"
- "'10 permit ipv4 host 192.0.2.1 any log' in result.commands"
- "'20 permit ipv4 host 192.0.2.2 any log' in result.commands"
- "'30 permit ipv4 host 192.0.2.3 any log' in result.commands"
- "'40 permit ipv4 host 192.0.2.4 any log' in result.commands"
- name: check sub level command using block replace
iosxr_config:
commands:
- 10 permit ipv4 host 1.1.1.1 any log
- 20 permit ipv4 host 2.2.2.2 any log
- 30 permit ipv4 host 3.3.3.3 any log
- 40 permit ipv4 host 4.4.4.4 any log
- 10 permit ipv4 host 192.0.2.1 any log
- 20 permit ipv4 host 192.0.2.2 any log
- 30 permit ipv4 host 192.0.2.3 any log
- 40 permit ipv4 host 192.0.2.4 any log
parents: ['ipv4 access-list test']
replace: block
register: result

View file

@ -4,11 +4,11 @@
- name: setup
iosxr_config:
commands:
- 10 permit ipv4 host 1.1.1.1 any log
- 20 permit ipv4 host 2.2.2.2 any log
- 30 permit ipv4 host 3.3.3.3 any log
- 40 permit ipv4 host 4.4.4.4 any log
- 50 permit ipv4 host 5.5.5.5 any log
- 10 permit ipv4 host 192.0.2.1 any log
- 20 permit ipv4 host 192.0.2.2 any log
- 30 permit ipv4 host 192.0.2.3 any log
- 40 permit ipv4 host 192.0.2.4 any log
- 50 permit ipv4 host 192.0.2.5 any log
parents: ['ipv4 access-list test']
before: ['no ipv4 access-list test']
match: none
@ -16,10 +16,10 @@
- name: configure sub level command using exact match
iosxr_config:
commands:
- 10 permit ipv4 host 1.1.1.1 any log
- 20 permit ipv4 host 2.2.2.2 any log
- 30 permit ipv4 host 3.3.3.3 any log
- 40 permit ipv4 host 4.4.4.4 any log
- 10 permit ipv4 host 192.0.2.1 any log
- 20 permit ipv4 host 192.0.2.2 any log
- 30 permit ipv4 host 192.0.2.3 any log
- 40 permit ipv4 host 192.0.2.4 any log
parents: ['ipv4 access-list test']
match: exact
register: result
@ -28,20 +28,20 @@
that:
- "result.changed == true"
- "'ipv4 access-list test' in result.commands"
- "'10 permit ipv4 host 1.1.1.1 any log' in result.commands"
- "'20 permit ipv4 host 2.2.2.2 any log' in result.commands"
- "'30 permit ipv4 host 3.3.3.3 any log' in result.commands"
- "'40 permit ipv4 host 4.4.4.4 any log' in result.commands"
- "'50 permit ipv4 host 5.5.5.5 any log' not in result.commands"
- "'10 permit ipv4 host 192.0.2.1 any log' in result.commands"
- "'20 permit ipv4 host 192.0.2.2 any log' in result.commands"
- "'30 permit ipv4 host 192.0.2.3 any log' in result.commands"
- "'40 permit ipv4 host 192.0.2.4 any log' in result.commands"
- "'50 permit ipv4 host 192.0.2.5 any log' not in result.commands"
- name: check sub level command using exact match
iosxr_config:
commands:
- 10 permit ipv4 host 1.1.1.1 any log
- 20 permit ipv4 host 2.2.2.2 any log
- 30 permit ipv4 host 3.3.3.3 any log
- 40 permit ipv4 host 4.4.4.4 any log
- 50 permit ipv4 host 5.5.5.5 any log
- 10 permit ipv4 host 192.0.2.1 any log
- 20 permit ipv4 host 192.0.2.2 any log
- 30 permit ipv4 host 192.0.2.3 any log
- 40 permit ipv4 host 192.0.2.4 any log
- 50 permit ipv4 host 192.0.2.5 any log
parents: ['ipv4 access-list test']
match: exact
register: result

View file

@ -4,11 +4,11 @@
- name: setup
iosxr_config:
commands:
- 10 permit ipv4 host 1.1.1.1 any log
- 20 permit ipv4 host 3.3.3.3 any log
- 30 permit ipv4 host 2.2.2.2 any log
- 40 permit ipv4 host 4.4.4.4 any log
- 50 permit ipv4 host 5.5.5.5 any log
- 10 permit ipv4 host 192.0.2.1 any log
- 20 permit ipv4 host 192.0.2.3 any log
- 30 permit ipv4 host 192.0.2.2 any log
- 40 permit ipv4 host 192.0.2.4 any log
- 50 permit ipv4 host 192.0.2.5 any log
parents: ['ipv4 access-list test']
before: ['no ipv4 access-list test']
match: none
@ -16,10 +16,10 @@
- name: configure sub level command using strict match
iosxr_config:
commands:
- 10 permit ipv4 host 1.1.1.1 any log
- 20 permit ipv4 host 2.2.2.2 any log
- 30 permit ipv4 host 3.3.3.3 any log
- 40 permit ipv4 host 4.4.4.4 any log
- 10 permit ipv4 host 192.0.2.1 any log
- 20 permit ipv4 host 192.0.2.2 any log
- 30 permit ipv4 host 192.0.2.3 any log
- 40 permit ipv4 host 192.0.2.4 any log
parents: ['ipv4 access-list test']
before: ['no ipv4 access-list test']
match: strict
@ -30,19 +30,19 @@
that:
- "result.changed == true"
- "'ipv4 access-list test' in result.commands"
- "'10 permit ipv4 host 1.1.1.1 any log' in result.commands"
- "'20 permit ipv4 host 2.2.2.2 any log' in result.commands"
- "'30 permit ipv4 host 3.3.3.3 any log' in result.commands"
- "'40 permit ipv4 host 4.4.4.4 any log' in result.commands"
- "'50 permit ipv4 host 5.5.5.5 any log' not in result.commands"
- "'10 permit ipv4 host 192.0.2.1 any log' in result.commands"
- "'20 permit ipv4 host 192.0.2.2 any log' in result.commands"
- "'30 permit ipv4 host 192.0.2.3 any log' in result.commands"
- "'40 permit ipv4 host 192.0.2.4 any log' in result.commands"
- "'50 permit ipv4 host 192.0.2.5 any log' not in result.commands"
- name: check sub level command using strict match
iosxr_config:
commands:
- 10 permit ipv4 host 1.1.1.1 any log
- 20 permit ipv4 host 2.2.2.2 any log
- 30 permit ipv4 host 3.3.3.3 any log
- 40 permit ipv4 host 4.4.4.4 any log
- 10 permit ipv4 host 192.0.2.1 any log
- 20 permit ipv4 host 192.0.2.2 any log
- 30 permit ipv4 host 192.0.2.3 any log
- 40 permit ipv4 host 192.0.2.4 any log
parents: ['ipv4 access-list test']
match: strict
register: result

View file

@ -5,9 +5,9 @@
- name: setup
iosxr_config:
commands:
- 10 permit ipv4 host 1.1.1.1 any log
- 20 permit ipv4 host 2.2.2.2 any log
- 30 permit ipv4 host 3.3.3.3 any log
- 10 permit ipv4 host 192.0.2.1 any log
- 20 permit ipv4 host 192.0.2.2 any log
- 30 permit ipv4 host 192.0.2.3 any log
parents: ['ipv4 access-list test']
before: ['no ipv4 access-list test']
match: none
@ -15,10 +15,10 @@
- name: configure sub level command using block resplace
iosxr_config:
commands:
- 10 permit ipv4 host 1.1.1.1 any log
- 20 permit ipv4 host 2.2.2.2 any log
- 30 permit ipv4 host 3.3.3.3 any log
- 40 permit ipv4 host 4.4.4.4 any log
- 10 permit ipv4 host 192.0.2.1 any log
- 20 permit ipv4 host 192.0.2.2 any log
- 30 permit ipv4 host 192.0.2.3 any log
- 40 permit ipv4 host 192.0.2.4 any log
parents: ['ipv4 access-list test']
replace: block
register: result
@ -27,18 +27,18 @@
that:
- "result.changed == true"
- "'ipv4 access-list test' in result.commands"
- "'10 permit ipv4 host 1.1.1.1 any log' in result.commands"
- "'20 permit ipv4 host 2.2.2.2 any log' in result.commands"
- "'30 permit ipv4 host 3.3.3.3 any log' in result.commands"
- "'40 permit ipv4 host 4.4.4.4 any log' in result.commands"
- "'10 permit ipv4 host 192.0.2.1 any log' in result.commands"
- "'20 permit ipv4 host 192.0.2.2 any log' in result.commands"
- "'30 permit ipv4 host 192.0.2.3 any log' in result.commands"
- "'40 permit ipv4 host 192.0.2.4 any log' in result.commands"
- name: check sub level command using block replace
iosxr_config:
commands:
- 10 permit ipv4 host 1.1.1.1 any log
- 20 permit ipv4 host 2.2.2.2 any log
- 30 permit ipv4 host 3.3.3.3 any log
- 40 permit ipv4 host 4.4.4.4 any log
- 10 permit ipv4 host 192.0.2.1 any log
- 20 permit ipv4 host 192.0.2.2 any log
- 30 permit ipv4 host 192.0.2.3 any log
- 40 permit ipv4 host 192.0.2.4 any log
parents: ['ipv4 access-list test']
replace: block
register: result

View file

@ -4,18 +4,18 @@
- name: setup
iosxr_config:
lines:
- no ip name-server 1.1.1.1
- no ip name-server 2.2.2.2
- no ip name-server 3.3.3.3
- no ip name-server 192.0.2.1
- no ip name-server 192.0.2.2
- no ip name-server 192.0.2.3
match: none
provider: "{{ cli }}"
- name: configure name_servers
iosxr_system:
name_servers:
- 1.1.1.1
- 2.2.2.2
- 3.3.3.3
- 192.0.2.1
- 192.0.2.2
- 192.0.2.3
provider: "{{ cli }}"
register: result
@ -23,16 +23,16 @@
that:
- result.changed == true
- result.commands|length == 3
- "'domain name-server 1.1.1.1' in result.commands"
- "'domain name-server 2.2.2.2' in result.commands"
- "'domain name-server 3.3.3.3' in result.commands"
- "'domain name-server 192.0.2.1' in result.commands"
- "'domain name-server 192.0.2.2' in result.commands"
- "'domain name-server 192.0.2.3' in result.commands"
- name: verify name_servers
iosxr_system:
name_servers:
- 1.1.1.1
- 2.2.2.2
- 3.3.3.3
- 192.0.2.1
- 192.0.2.2
- 192.0.2.3
provider: "{{ cli }}"
register: result
@ -43,8 +43,8 @@
- name: remove one
iosxr_system:
name_servers:
- 1.1.1.1
- 2.2.2.2
- 192.0.2.1
- 192.0.2.2
provider: "{{ cli }}"
register: result
@ -52,13 +52,13 @@
that:
- result.changed == true
- result.commands|length == 1
- "'no domain name-server 3.3.3.3' in result.commands"
- "'no domain name-server 192.0.2.3' in result.commands"
- name: setup
iosxr_config:
lines:
- no ip name-server 1.1.1.1
- no ip name-server 2.2.2.2
- no ip name-server 192.0.2.1
- no ip name-server 192.0.2.2
match: none
provider: "{{ cli }}"

View file

@ -5,9 +5,9 @@
- name: setup
iosxr_config:
lines:
- no domain name-server 1.1.1.1
- no domain name-server 2.2.2.2
- no domain name-server 3.3.3.3
- no domain name-server 192.0.2.1
- no domain name-server 192.0.2.2
- no domain name-server 192.0.2.3
match: none
provider: "{{ cli }}"
connection: network_cli
@ -16,9 +16,9 @@
iosxr_system:
vrf: ansible
name_servers:
- 1.1.1.1
- 2.2.2.2
- 3.3.3.3
- 192.0.2.1
- 192.0.2.2
- 192.0.2.3
provider: "{{ netconf }}"
state: absent
connection: netconf
@ -28,9 +28,9 @@
- name: configure name_servers
iosxr_system:
name_servers:
- 1.1.1.1
- 2.2.2.2
- 3.3.3.3
- 192.0.2.1
- 192.0.2.2
- 192.0.2.3
provider: "{{ netconf }}"
connection: netconf
register: result
@ -39,16 +39,16 @@
that:
- result.changed == true
- result.xml|length == 1
- "'1.1.1.1' in result.xml[0]"
- "'2.2.2.2' in result.xml[0]"
- "'3.3.3.3' in result.xml[0]"
- "'192.0.2.1' in result.xml[0]"
- "'192.0.2.2' in result.xml[0]"
- "'192.0.2.3' in result.xml[0]"
- name: verify name_servers
iosxr_system:
name_servers:
- 1.1.1.1
- 2.2.2.2
- 3.3.3.3
- 192.0.2.1
- 192.0.2.2
- 192.0.2.3
provider: "{{ netconf }}"
connection: netconf
register: result
@ -61,9 +61,9 @@
iosxr_system: &addvrf
vrf: ansible
name_servers:
- 1.1.1.1
- 2.2.2.2
- 3.3.3.3
- 192.0.2.1
- 192.0.2.2
- 192.0.2.3
provider: "{{ netconf }}"
connection: netconf
register: result
@ -73,9 +73,9 @@
- result.changed == true
- result.xml|length == 1
- "'ansible' in result.xml[0]"
- "'1.1.1.1' in result.xml[0]"
- "'2.2.2.2' in result.xml[0]"
- "'3.3.3.3' in result.xml[0]"
- "'192.0.2.1' in result.xml[0]"
- "'192.0.2.2' in result.xml[0]"
- "'192.0.2.3' in result.xml[0]"
- name: verify change to vrf
iosxr_system: *addvrf
@ -89,8 +89,8 @@
- name: remove one
iosxr_system:
name_servers:
- 1.1.1.1
- 2.2.2.2
- 192.0.2.1
- 192.0.2.2
provider: "{{ netconf }}"
connection: netconf
register: result
@ -99,14 +99,14 @@
that:
- result.changed == true
- result.xml|length == 1
- "'3.3.3.3' in result.xml[0]"
- "'192.0.2.3' in result.xml[0]"
- name: remove one with vrf
iosxr_system:
vrf: ansible
name_servers:
- 1.1.1.1
- 2.2.2.2
- 192.0.2.1
- 192.0.2.2
provider: "{{ netconf }}"
connection: netconf
ignore_errors: True
@ -115,8 +115,8 @@
- name: teardown
iosxr_config:
lines:
- no domain name-server 1.1.1.1
- no domain name-server 2.2.2.2
- no domain name-server 192.0.2.1
- no domain name-server 192.0.2.2
match: none
provider: "{{ cli }}"
connection: network_cli
@ -125,8 +125,8 @@
iosxr_system:
vrf: ansible
name_servers:
- 1.1.1.1
- 2.2.2.2
- 192.0.2.1
- 192.0.2.2
provider: "{{ netconf }}"
state: absent
connection: netconf

View file

@ -13,7 +13,7 @@
junos_config:
lines:
- 'set system host-name {{ inventory_hostname_short }}'
- 'set interfaces lo0 unit 0 family inet address 1.1.1.1/32'
- 'set interfaces lo0 unit 0 family inet address 192.0.2.1/32'
provider: "{{ netconf }}"
register: result
@ -23,13 +23,13 @@
# Ensure host-name *hasn't* been updated
- "'host-name;' not in result.diff.prepared"
# Ensure interface has *been* updated
- "'address 1.1.1.1/32' in result.diff.prepared"
- "'address 192.0.2.1/32' in result.diff.prepared"
- name: check multiple commands idempotent
junos_config:
lines:
- 'set system host-name {{ inventory_hostname_short }}'
- 'set interfaces lo0 unit 0 family inet address 1.1.1.1/32'
- 'set interfaces lo0 unit 0 family inet address 192.0.2.1/32'
provider: "{{ netconf }}"
register: result

View file

@ -48,7 +48,7 @@
- assert:
that:
- "result.changed == true"
- "'address 1.1.1.1/32' in result.diff.prepared"
- "'address 192.0.2.1/32' in result.diff.prepared"
- name: check device with config
junos_config:
@ -79,7 +79,7 @@
- assert:
that:
- "result.changed == true"
- "'address 1.1.1.1/32' in result.diff.prepared"
- "'address 192.0.2.1/32' in result.diff.prepared"
- name: check device with config
junos_config:

View file

@ -4,7 +4,7 @@
- name: setup - remove interface address
junos_l3_interface:
name: ge-0/0/1
ipv4: 1.1.1.1
ipv4: 192.0.2.1
ipv6: fd5d:12c9:2201:1::1
state: absent
provider: "{{ netconf }}"
@ -12,7 +12,7 @@
- name: Configure interface address
junos_l3_interface:
name: ge-0/0/1
ipv4: 1.1.1.1
ipv4: 192.0.2.1
ipv6: fd5d:12c9:2201:1::1
state: present
provider: "{{ netconf }}"
@ -27,15 +27,15 @@
- assert:
that:
- "result.changed == true"
- "'<name>1.1.1.1/32</name>' in config.xml"
- "'<name>192.0.2.1/32</name>' in config.xml"
- "'<name>fd5d:12c9:2201:1::1/128</name>' in config.xml"
- result.diff.prepared is search("\+ *address 1.1.1.1/32")
- result.diff.prepared is search("\+ *address 192.0.2.1/32")
- result.diff.prepared is search("\+ *address fd5d:12c9:2201:1::1/128")
- name: Configure interface address (idempotent)
junos_l3_interface:
name: ge-0/0/1
ipv4: 1.1.1.1
ipv4: 192.0.2.1
ipv6: fd5d:12c9:2201:1::1
state: present
provider: "{{ netconf }}"
@ -48,7 +48,7 @@
- name: Deactivate interface address
junos_l3_interface:
name: ge-0/0/1
ipv4: 1.1.1.1
ipv4: 192.0.2.1
ipv6: fd5d:12c9:2201:1::1
state: present
active: False
@ -65,13 +65,13 @@
that:
- "result.changed == true"
- "'<address inactive=\"inactive\">' in config.xml"
- result.diff.prepared is search("! *inactive[:] address 1.1.1.1/32")
- result.diff.prepared is search("! *inactive[:] address 192.0.2.1/32")
- result.diff.prepared is search("! *inactive[:] address fd5d:12c9:2201:1::1/128")
- name: Activate interface address
junos_l3_interface:
name: ge-0/0/1
ipv4: 1.1.1.1
ipv4: 192.0.2.1
ipv6: fd5d:12c9:2201:1::1
state: present
active: True
@ -81,13 +81,13 @@
- assert:
that:
- "result.changed == true"
- result.diff.prepared is search("! *active[:] address 1.1.1.1/32")
- result.diff.prepared is search("! *active[:] address 192.0.2.1/32")
- result.diff.prepared is search("! *active[:] address fd5d:12c9:2201:1::1/128")
- name: Delete interface address
junos_l3_interface:
name: ge-0/0/1
ipv4: 1.1.1.1
ipv4: 192.0.2.1
ipv6: fd5d:12c9:2201:1::1
state: absent
provider: "{{ netconf }}"
@ -95,13 +95,13 @@
- assert:
that:
- result.diff.prepared is search("\- *address 1.1.1.1/32")
- result.diff.prepared is search("\- *address 192.0.2.1/32")
- result.diff.prepared is search("\- *address fd5d:12c9:2201:1::1/128")
- name: Delete interface address (idempotent)
junos_l3_interface:
name: ge-0/0/1
ipv4: 1.1.1.1
ipv4: 192.0.2.1
ipv6: fd5d:12c9:2201:1::1
state: absent
provider: "{{ netconf }}"
@ -114,7 +114,7 @@
- name: Aggregate setup- delete interface ge-0/0/1
junos_l3_interface:
name: ge-0/0/1
ipv4: 1.1.1.1
ipv4: 192.0.2.1
ipv6: fd5d:12c9:2201:1::1
state: absent
provider: "{{ netconf }}"
@ -123,7 +123,7 @@
- name: Aggregate setup- delete interface ge-0/0/2
junos_l3_interface:
name: ge-0/0/2
ipv4: 2.2.2.2
ipv4: 192.0.2.2
ipv6: fd5d:12c9:2201:2::2
state: absent
provider: "{{ netconf }}"
@ -133,10 +133,10 @@
junos_l3_interface:
aggregate:
- name: ge-0/0/1
ipv4: 1.1.1.1
ipv4: 192.0.2.1
ipv6: fd5d:12c9:2201:1::1
- name: ge-0/0/2
ipv4: 2.2.2.2
ipv4: 192.0.2.2
ipv6: fd5d:12c9:2201:2::2
provider: "{{ netconf }}"
register: result
@ -145,11 +145,11 @@
that:
- 'result.changed == true'
- "'edit interfaces ge-0/0/1 unit 0 family inet' in result.diff.prepared"
- result.diff.prepared is search("\+ *address 1.1.1.1/32")
- result.diff.prepared is search("\+ *address 192.0.2.1/32")
- "'edit interfaces ge-0/0/1 unit 0 family inet6' in result.diff.prepared"
- result.diff.prepared is search("\+ *address fd5d:12c9:2201:1::1/128")
- "'edit interfaces ge-0/0/2 unit 0 family inet' in result.diff.prepared"
- result.diff.prepared is search("\+ *address 2.2.2.2/32")
- result.diff.prepared is search("\+ *address 192.0.2.2/32")
- "'edit interfaces ge-0/0/2 unit 0 family inet6' in result.diff.prepared"
- result.diff.prepared is search("\+ *address fd5d:12c9:2201:2::2/128")
@ -157,10 +157,10 @@
junos_l3_interface:
aggregate:
- name: ge-0/0/1
ipv4: 1.1.1.1
ipv4: 192.0.2.1
ipv6: fd5d:12c9:2201:1::1
- name: ge-0/0/2
ipv4: 2.2.2.2
ipv4: 192.0.2.2
ipv6: fd5d:12c9:2201:2::2
active: True
provider: "{{ netconf }}"
@ -174,10 +174,10 @@
junos_l3_interface:
aggregate:
- name: ge-0/0/1
ipv4: 1.1.1.1
ipv4: 192.0.2.1
ipv6: fd5d:12c9:2201:1::1
- name: ge-0/0/2
ipv4: 2.2.2.2
ipv4: 192.0.2.2
ipv6: fd5d:12c9:2201:2::2
active: False
provider: "{{ netconf }}"
@ -186,19 +186,19 @@
- assert:
that:
- 'result.changed == true'
- result.diff.prepared is search("! *inactive[:] address 1.1.1.1/32")
- result.diff.prepared is search("! *inactive[:] address 192.0.2.1/32")
- result.diff.prepared is search("! *inactive[:] address fd5d:12c9:2201:1::1/128")
- result.diff.prepared is search("! *inactive[:] address 2.2.2.2/32")
- result.diff.prepared is search("! *inactive[:] address 192.0.2.2/32")
- result.diff.prepared is search("! *inactive[:] address fd5d:12c9:2201:2::2/128")
- name: Activate l3 interface configuration
junos_l3_interface:
aggregate:
- name: ge-0/0/1
ipv4: 1.1.1.1
ipv4: 192.0.2.1
ipv6: fd5d:12c9:2201:1::1
- name: ge-0/0/2
ipv4: 2.2.2.2
ipv4: 192.0.2.2
ipv6: fd5d:12c9:2201:2::2
active: True
provider: "{{ netconf }}"
@ -207,19 +207,19 @@
- assert:
that:
- 'result.changed == true'
- result.diff.prepared is search("! *active[:] address 1.1.1.1/32")
- result.diff.prepared is search("! *active[:] address 192.0.2.1/32")
- result.diff.prepared is search("! *active[:] address fd5d:12c9:2201:1::1/128")
- result.diff.prepared is search("! *active[:] address 2.2.2.2/32")
- result.diff.prepared is search("! *active[:] address 192.0.2.2/32")
- result.diff.prepared is search("! *active[:] address fd5d:12c9:2201:2::2/128")
- name: Delete l3 interface configuration
junos_l3_interface:
aggregate:
- name: ge-0/0/1
ipv4: 1.1.1.1
ipv4: 192.0.2.1
ipv6: fd5d:12c9:2201:1::1
- name: ge-0/0/2
ipv4: 2.2.2.2
ipv4: 192.0.2.2
ipv6: fd5d:12c9:2201:2::2
state: absent
provider: "{{ netconf }}"
@ -229,11 +229,11 @@
that:
- 'result.changed == true'
- "'edit interfaces ge-0/0/1 unit 0 family inet' in result.diff.prepared"
- result.diff.prepared is search("\- *address 1.1.1.1/32")
- result.diff.prepared is search("\- *address 192.0.2.1/32")
- "'edit interfaces ge-0/0/1 unit 0 family inet6' in result.diff.prepared"
- result.diff.prepared is search("\- *address fd5d:12c9:2201:1::1/128")
- "'edit interfaces ge-0/0/2 unit 0 family inet' in result.diff.prepared"
- result.diff.prepared is search("\- *address 2.2.2.2/32")
- result.diff.prepared is search("\- *address 192.0.2.2/32")
- "'edit interfaces ge-0/0/2 unit 0 family inet6' in result.diff.prepared"
- result.diff.prepared is search("\- *address fd5d:12c9:2201:2::2/128")
@ -241,10 +241,10 @@
junos_l3_interface:
aggregate:
- name: ge-0/0/1
ipv4: 1.1.1.1
ipv4: 192.0.2.1
ipv6: fd5d:12c9:2201:1::1
- name: ge-0/0/2
ipv4: 2.2.2.2
ipv4: 192.0.2.2
ipv6: fd5d:12c9:2201:2::2
state: absent
provider: "{{ netconf }}"

View file

@ -7,7 +7,7 @@
- name: setup - remove interface address
net_l3_interface:
name: ge-0/0/1
ipv4: 1.1.1.1
ipv4: 192.0.2.1
ipv6: fd5d:12c9:2201:1::1
state: absent
provider: "{{ netconf }}"
@ -15,7 +15,7 @@
- name: Configure interface address using platform agnostic module
net_l3_interface:
name: ge-0/0/1
ipv4: 1.1.1.1
ipv4: 192.0.2.1
ipv6: fd5d:12c9:2201:1::1
state: present
provider: "{{ netconf }}"
@ -30,15 +30,15 @@
- assert:
that:
- "result.changed == true"
- "'<name>1.1.1.1/32</name>' in config.xml"
- "'<name>192.0.2.1/32</name>' in config.xml"
- "'<name>fd5d:12c9:2201:1::1/128</name>' in config.xml"
- result.diff.prepared is search("\+ *address 1.1.1.1/32")
- result.diff.prepared is search("\+ *address 192.0.2.1/32")
- result.diff.prepared is search("\+ *address fd5d:12c9:2201:1::1/128")
- name: teardown - remove interface address
net_l3_interface:
name: ge-0/0/1
ipv4: 1.1.1.1
ipv4: 192.0.2.1
ipv6: fd5d:12c9:2201:1::1
state: absent
provider: "{{ netconf }}"

View file

@ -62,7 +62,7 @@
- name: setup - remove interface address
net_l3_interface:
name: ge-0/0/1
ipv4: 1.1.1.1
ipv4: 192.0.2.1
ipv6: fd5d:12c9:2201:1::1
state: absent
provider: "{{ netconf }}"
@ -70,7 +70,7 @@
- name: Configure interface address using platform agnostic module
net_l3_interface:
name: ge-0/0/1
ipv4: 1.1.1.1
ipv4: 192.0.2.1
ipv6: fd5d:12c9:2201:1::1
state: present
provider: "{{ netconf }}"
@ -85,15 +85,15 @@
- assert:
that:
- "result.changed == true"
- "'<name>1.1.1.1/32</name>' in config.xml"
- "'<name>192.0.2.1/32</name>' in config.xml"
- "'<name>fd5d:12c9:2201:1::1/128</name>' in config.xml"
- result.diff.prepared is search("\+ *address 1.1.1.1/32")
- result.diff.prepared is search("\+ *address 192.0.2.1/32")
- result.diff.prepared is search("\+ *address fd5d:12c9:2201:1::1/128")
- name: teardown - remove interface address
net_l3_interface:
name: ge-0/0/1
ipv4: 1.1.1.1
ipv4: 192.0.2.1
ipv6: fd5d:12c9:2201:1::1
state: absent
provider: "{{ netconf }}"

View file

@ -14,7 +14,7 @@
interfaces:
- ge-0/0/6
- ge-0/0/5
rd: 3.3.3.3:10
rd: 192.0.2.3:10
target: target:65513:111
state: present
provider: "{{ netconf }}"
@ -28,7 +28,7 @@
- result.diff.prepared is search("\+ *instance-type vrf")
- result.diff.prepared is search("\+ *interface ge-0/0/5.0")
- result.diff.prepared is search("\+ *interface ge-0/0/6.0")
- result.diff.prepared is search("\+ *route-distinguisher 3.3.3.3:10")
- result.diff.prepared is search("\+ *route-distinguisher 192.0.2.3:10")
- result.diff.prepared is search("\+ *vrf-target target:65513:111")
- name: Configure vrf and its parameter (idempotent)
@ -38,7 +38,7 @@
interfaces:
- ge-0/0/6
- ge-0/0/5
rd: 3.3.3.3:10
rd: 192.0.2.3:10
target: target:65513:111
state: present
provider: "{{ netconf }}"
@ -55,7 +55,7 @@
interfaces:
- ge-0/0/3
- ge-0/0/2
rd: 1.1.1.1:10
rd: 192.0.2.1:10
target: target:65514:113
state: present
provider: "{{ netconf }}"
@ -68,7 +68,7 @@
- result.diff.prepared is search("\+ *interface ge-0/0/2.0")
- result.diff.prepared is search("\+ *interface ge-0/0/3.0")
- "'[edit routing-instances test-1]' in result.diff.prepared"
- result.diff.prepared is search("\+ *route-distinguisher 1.1.1.1:10")
- result.diff.prepared is search("\+ *route-distinguisher 192.0.2.1:10")
- result.diff.prepared is search("\+ *vrf-target target:65514:113")
- name: Deactivate vrf
@ -78,7 +78,7 @@
interfaces:
- ge-0/0/3
- ge-0/0/2
rd: 1.1.1.1:10
rd: 192.0.2.1:10
target: target:65514:113
state: present
active: False
@ -104,7 +104,7 @@
interfaces:
- ge-0/0/3
- ge-0/0/2
rd: 1.1.1.1:10
rd: 192.0.2.1:10
target: target:65514:113
state: present
active: True
@ -130,7 +130,7 @@
interfaces:
- ge-0/0/3
- ge-0/0/2
rd: 1.1.1.1:10
rd: 192.0.2.1:10
target: target:65514:113
state: absent
provider: "{{ netconf }}"
@ -144,7 +144,7 @@
- result.diff.prepared is search("\- *instance-type vrf")
- result.diff.prepared is search("\- *interface ge-0/0/2.0")
- result.diff.prepared is search("\- *interface ge-0/0/3.0")
- result.diff.prepared is search("\- *route-distinguisher 1.1.1.1:10")
- result.diff.prepared is search("\- *route-distinguisher 192.0.2.1:10")
- result.diff.prepared is search("\- *vrf-target target:65514:113")
- name: Delete vrf (idempotent)
@ -154,7 +154,7 @@
interfaces:
- ge-0/0/3
- ge-0/0/2
rd: 1.1.1.1:10
rd: 192.0.2.1:10
target: target:65514:113
state: absent
provider: "{{ netconf }}"
@ -181,14 +181,14 @@
interfaces:
- ge-0/0/3
- ge-0/0/2
rd: 1.1.1.1:10
rd: 192.0.2.1:10
target: target:65514:113
- name: test-2
description: test-vrf-2
interfaces:
- ge-0/0/4
- ge-0/0/5
rd: 2.2.2.2:10
rd: 192.0.2.2:10
target: target:65515:114
provider: "{{ netconf }}"
register: result
@ -201,14 +201,14 @@
- result.diff.prepared is search("\+ *instance-type vrf")
- result.diff.prepared is search("\+ *interface ge-0/0/2.0")
- result.diff.prepared is search("\+ *interface ge-0/0/3.0")
- result.diff.prepared is search("\+ *route-distinguisher 1.1.1.1:10")
- result.diff.prepared is search("\+ *route-distinguisher 192.0.2.1:10")
- result.diff.prepared is search("\+ *vrf-target target:65514:113")
- result.diff.prepared is search("\+ *test-2")
- result.diff.prepared is search("\+ *description test-vrf-2")
- result.diff.prepared is search("\+ *instance-type vrf")
- result.diff.prepared is search("\+ *interface ge-0/0/4.0")
- result.diff.prepared is search("\+ *interface ge-0/0/5.0")
- result.diff.prepared is search("\+ *route-distinguisher 2.2.2.2:10")
- result.diff.prepared is search("\+ *route-distinguisher 192.0.2.2:10")
- result.diff.prepared is search("\+ *vrf-target target:65515:114")
- name: Deactivate vrf configuration using aggregate
@ -219,14 +219,14 @@
interfaces:
- ge-0/0/3
- ge-0/0/2
rd: 1.1.1.1:10
rd: 192.0.2.1:10
target: target:65514:113
- name: test-2
description: test-vrf-2
interfaces:
- ge-0/0/4
- ge-0/0/5
rd: 2.2.2.2:10
rd: 192.0.2.2:10
target: target:65515:114
active: False
provider: "{{ netconf }}"
@ -254,14 +254,14 @@
interfaces:
- ge-0/0/3
- ge-0/0/2
rd: 1.1.1.1:10
rd: 192.0.2.1:10
target: target:65514:113
- name: test-2
description: test-vrf-2
interfaces:
- ge-0/0/4
- ge-0/0/5
rd: 2.2.2.2:10
rd: 192.0.2.2:10
target: target:65515:114
active: True
provider: "{{ netconf }}"
@ -298,14 +298,14 @@
- result.diff.prepared is search("\- *instance-type vrf")
- result.diff.prepared is search("\- *interface ge-0/0/2.0")
- result.diff.prepared is search("\- *interface ge-0/0/3.0")
- result.diff.prepared is search("\- *route-distinguisher 1.1.1.1:10")
- result.diff.prepared is search("\- *route-distinguisher 192.0.2.1:10")
- result.diff.prepared is search("\- *vrf-target target:65514:113")
- result.diff.prepared is search("\- *test-2")
- result.diff.prepared is search("\- *description test-vrf-2")
- result.diff.prepared is search("\- *instance-type vrf")
- result.diff.prepared is search("\- *interface ge-0/0/4.0")
- result.diff.prepared is search("\- *interface ge-0/0/5.0")
- result.diff.prepared is search("\- *route-distinguisher 2.2.2.2:10")
- result.diff.prepared is search("\- *route-distinguisher 192.0.2.2:10")
- result.diff.prepared is search("\- *vrf-target target:65515:114")
- name: Delete vrf configuration using aggregate (idempotent)

View file

@ -17,7 +17,7 @@
interfaces:
- ge-0/0/6
- ge-0/0/5
rd: 3.3.3.3:10
rd: 192.0.2.3:10
target: target:65513:111
state: present
provider: "{{ netconf }}"
@ -31,7 +31,7 @@
- result.diff.prepared is search("\+ *instance-type vrf")
- result.diff.prepared is search("\+ *interface ge-0/0/5.0")
- result.diff.prepared is search("\+ *interface ge-0/0/6.0")
- result.diff.prepared is search("\+ *route-distinguisher 3.3.3.3:10")
- result.diff.prepared is search("\+ *route-distinguisher 192.0.2.3:10")
- result.diff.prepared is search("\+ *vrf-target target:65513:111")
- name: teardown - remove vrf

View file

@ -19,7 +19,7 @@
seq: 10
action: permit
proto: tcp
src: 1.1.1.1/24
src: 192.0.2.1/24
src_port_op: range
src_port1: 1900
src_port2: 1910
@ -57,7 +57,7 @@
seq: 10
action: deny
proto: tcp
src: 1.1.1.1/24
src: 192.0.2.1/24
src_port_op: range
src_port1: 1900
src_port2: 1910

View file

@ -37,7 +37,7 @@
seq: 10
action: permit
proto: tcp
src: 1.1.1.1/24
src: 192.0.2.1/24
dest: any
- block:

View file

@ -20,7 +20,7 @@
nxos_bgp: &set_multi_vrf
asn: 65535
vrf: "{{ item }}"
router_id: 1.1.1.1
router_id: 192.0.2.1
bestpath_always_compare_med: true
bestpath_aspath_multipath_relax: true
bestpath_compare_routerid: true

View file

@ -29,7 +29,7 @@
- name: "Configure BGP defaults"
nxos_bgp: &configure_default
asn: 65535
router_id: 1.1.1.1
router_id: 192.0.2.1
state: present
register: result
@ -60,7 +60,7 @@
- name: "Configure BGP non defaults"
nxos_bgp: &configure_non_default
asn: 65535
router_id: 1.1.1.1
router_id: 192.0.2.1
bestpath_always_compare_med: true
bestpath_aspath_multipath_relax: true
bestpath_compare_routerid: true

View file

@ -24,7 +24,7 @@
- name: "Setup"
nxos_bgp_neighbor: &removenp
asn: 65535
neighbor: 3.3.3.3
neighbor: 192.0.2.3
vrf: "{{ item }}"
state: absent
with_items: "{{ vrfs }}"
@ -33,7 +33,7 @@
- name: "Setup"
nxos_bgp_neighbor: &remove
asn: 65535
neighbor: 3.3.3.3/32
neighbor: 192.0.2.3/32
vrf: "{{ item }}"
state: absent
with_items: "{{ vrfs }}"
@ -43,7 +43,7 @@
- name: "Configure BGP neighbor1"
nxos_bgp_neighbor: &configure1
asn: 65535
neighbor: 3.3.3.3/32
neighbor: 192.0.2.3/32
vrf: "{{ item }}"
connected_check: true
capability_negotiation: true
@ -80,7 +80,7 @@
- name: "Configure BGP neighbor2"
nxos_bgp_neighbor: &configure2
asn: 65535
neighbor: 3.3.3.3/32
neighbor: 192.0.2.3/32
vrf: "{{ item }}"
connected_check: False
capability_negotiation: False
@ -127,7 +127,7 @@
- name: "Configure BGP neighbor3"
nxos_bgp_neighbor: &configure3
asn: 65535
neighbor: 3.3.3.3/32
neighbor: 192.0.2.3/32
vrf: "{{ item }}"
description: "tested by ansible"
remove_private_as: "{{remove_private_asa|default(omit)}}"
@ -147,7 +147,7 @@
- name: "Configure BGP neighbor4"
nxos_bgp_neighbor: &configure4
asn: 65535
neighbor: 3.3.3.3/32
neighbor: 192.0.2.3/32
vrf: "{{ item }}"
description: "tested by ansible"
remove_private_as: "{{remove_private_asr|default(omit)}}"
@ -174,7 +174,7 @@
- name: "Configure BGP neighbor 3des password"
nxos_bgp_neighbor: &configure_3des_password
asn: 65535
neighbor: 3.3.3.3/32
neighbor: 192.0.2.3/32
vrf: "{{ item }}"
remote_as: 30
pwd: '386c0565965f89de'
@ -201,7 +201,7 @@
- name: "Configure BGP neighbor type 7 password"
nxos_bgp_neighbor: &configure_type7_password
asn: 65535
neighbor: 3.3.3.3/32
neighbor: 192.0.2.3/32
vrf: "{{ item }}"
remote_as: 30
pwd: '386c0565965f89de'
@ -221,7 +221,7 @@
- name: "Remove BGP neighbor password"
nxos_bgp_neighbor: &remove_password
asn: 65535
neighbor: 3.3.3.3/32
neighbor: 192.0.2.3/32
vrf: "{{ item }}"
remote_as: 30
pwd: default
@ -248,7 +248,7 @@
- name: "Configure BGP neighbor transport type passive"
nxos_bgp_neighbor: &configure_transport_passive
asn: 65535
neighbor: 3.3.3.3
neighbor: 192.0.2.3
vrf: "{{ item }}"
remote_as: 30
transport_passive_only: true
@ -267,7 +267,7 @@
- name: "Configure BGP neighbor transport type default"
nxos_bgp_neighbor: &configure_transport_default
asn: 65535
neighbor: 3.3.3.3
neighbor: 192.0.2.3
vrf: "{{ item }}"
remote_as: 30
transport_passive_only: false

View file

@ -22,7 +22,7 @@
- name: "Configure BGP neighbor address-family"
nxos_bgp_neighbor_af: &configure1
asn: 65535
neighbor: '3.3.3.3'
neighbor: '192.0.2.3'
afi: ipv4
safi: unicast
additional_paths_receive: 'enable'
@ -63,7 +63,7 @@
- name: "Configure BGP neighbor address-family def1"
nxos_bgp_neighbor_af: &configure_def1
asn: 65535
neighbor: '3.3.3.3'
neighbor: '192.0.2.3'
afi: ipv4
safi: unicast
additional_paths_receive: 'inherit'
@ -100,7 +100,7 @@
- name: "Setup: Remove BGP config"
nxos_bgp_neighbor_af: &removenaf
asn: 65535
neighbor: '3.3.3.3'
neighbor: '192.0.2.3'
afi: ipv4
safi: unicast
state: absent
@ -117,7 +117,7 @@
- name: "Configure BGP neighbor address-family"
nxos_bgp_neighbor_af: &configure2
asn: 65535
neighbor: '3.3.3.3'
neighbor: '192.0.2.3'
afi: ipv4
safi: unicast
allowas_in_max: '5'
@ -142,7 +142,7 @@
- name: "Configure BGP neighbor address-family def2"
nxos_bgp_neighbor_af: &configure_def2
asn: 65535
neighbor: '3.3.3.3'
neighbor: '192.0.2.3'
afi: ipv4
safi: unicast
allowas_in_max: default
@ -180,14 +180,14 @@
nxos_bgp_neighbor:
asn: 65535
vrf: 'blue'
neighbor: '3.3.3.3'
neighbor: '192.0.2.3'
remote_as: 2
- name: "Configure BGP neighbor 3"
nxos_bgp_neighbor_af: &configure3
asn: 65535
vrf: 'blue'
neighbor: '3.3.3.3'
neighbor: '192.0.2.3'
afi: ipv4
safi: unicast
additional_paths_receive: 'disable'
@ -211,7 +211,7 @@
nxos_bgp_neighbor_af: &configure_def3
asn: 65535
vrf: 'blue'
neighbor: '3.3.3.3'
neighbor: '192.0.2.3'
afi: ipv4
safi: unicast
additional_paths_receive: 'inherit'
@ -241,13 +241,13 @@
- name: "Configure BGP neighbor af route_reflector_client"
nxos_bgp_neighbor:
asn: 65535
neighbor: '2.2.2.2'
neighbor: '192.0.2.2'
remote_as: 65535
- name: "Configure BGP neighbor 4"
nxos_bgp_neighbor_af: &configure4
asn: 65535
neighbor: '2.2.2.2'
neighbor: '192.0.2.2'
afi: ipv4
safi: unicast
route_reflector_client: 'true'
@ -264,7 +264,7 @@
- name: "Configure BGP neighbor def4"
nxos_bgp_neighbor_af: &configure_def4
asn: 65535
neighbor: '2.2.2.2'
neighbor: '192.0.2.2'
afi: ipv4
safi: unicast
route_reflector_client: False

View file

@ -26,7 +26,7 @@
- name: "Configure BGP defaults"
nxos_bgp: &configure_default
asn: 65535
router_id: 1.1.1.1
router_id: 192.0.2.1
state: present
register: result

View file

@ -26,7 +26,7 @@
- name: "Configure BGP defaults"
nxos_bgp: &configure_default
asn: 65535
router_id: 1.1.1.1
router_id: 192.0.2.1
state: present
register: result

View file

@ -4,11 +4,11 @@
- name: setup
nxos_config:
commands:
- 10 permit ip 1.1.1.1/32 any log
- 20 permit ip 2.2.2.2/32 any log
- 30 permit ip 3.3.3.3/32 any log
- 40 permit ip 4.4.4.4/32 any log
- 50 permit ip 5.5.5.5/32 any log
- 10 permit ip 192.0.2.1/32 any log
- 20 permit ip 192.0.2.2/32 any log
- 30 permit ip 192.0.2.3/32 any log
- 40 permit ip 192.0.2.4/32 any log
- 50 permit ip 192.0.2.5/32 any log
parents: ip access-list test
before: no ip access-list test
match: none
@ -16,10 +16,10 @@
- name: configure sub level command using exact match
nxos_config:
commands:
- 10 permit ip 1.1.1.1/32 any log
- 20 permit ip 2.2.2.2/32 any log
- 30 permit ip 3.3.3.3/32 any log
- 40 permit ip 4.4.4.4/32 any log
- 10 permit ip 192.0.2.1/32 any log
- 20 permit ip 192.0.2.2/32 any log
- 30 permit ip 192.0.2.3/32 any log
- 40 permit ip 192.0.2.4/32 any log
parents: ip access-list test
match: exact
register: result
@ -28,20 +28,20 @@
that:
- "result.changed == true"
- "'ip access-list test' in result.updates"
- "'10 permit ip 1.1.1.1/32 any log' in result.updates"
- "'20 permit ip 2.2.2.2/32 any log' in result.updates"
- "'30 permit ip 3.3.3.3/32 any log' in result.updates"
- "'40 permit ip 4.4.4.4/32 any log' in result.updates"
- "'50 permit ip 5.5.5.5/32 any log' not in result.updates"
- "'10 permit ip 192.0.2.1/32 any log' in result.updates"
- "'20 permit ip 192.0.2.2/32 any log' in result.updates"
- "'30 permit ip 192.0.2.3/32 any log' in result.updates"
- "'40 permit ip 192.0.2.4/32 any log' in result.updates"
- "'50 permit ip 192.0.2.5/32 any log' not in result.updates"
- name: check sub level command using exact match
nxos_config:
lines:
- 10 permit ip 1.1.1.1/32 any log
- 20 permit ip 2.2.2.2/32 any log
- 30 permit ip 3.3.3.3/32 any log
- 40 permit ip 4.4.4.4/32 any log
- 50 permit ip 5.5.5.5/32 any log
- 10 permit ip 192.0.2.1/32 any log
- 20 permit ip 192.0.2.2/32 any log
- 30 permit ip 192.0.2.3/32 any log
- 40 permit ip 192.0.2.4/32 any log
- 50 permit ip 192.0.2.5/32 any log
parents: ip access-list test
match: exact
register: result

View file

@ -4,11 +4,11 @@
- name: setup
nxos_config:
commands:
- 10 permit ip 1.1.1.1/32 any log
- 20 permit ip 2.2.2.2/32 any log
- 30 permit ip 3.3.3.3/32 any log
- 40 permit ip 4.4.4.4/32 any log
- 50 permit ip 5.5.5.5/32 any log
- 10 permit ip 192.0.2.1/32 any log
- 20 permit ip 192.0.2.2/32 any log
- 30 permit ip 192.0.2.3/32 any log
- 40 permit ip 192.0.2.4/32 any log
- 50 permit ip 192.0.2.5/32 any log
parents: ip access-list test
before: no ip access-list test
match: none
@ -16,10 +16,10 @@
- name: configure sub level command using strict match
nxos_config:
lines:
- 10 permit ip 1.1.1.1/32 any log
- 30 permit ip 3.3.3.3/32 any log
- 20 permit ip 2.2.2.2/32 any log
- 40 permit ip 4.4.4.4/32 any log
- 10 permit ip 192.0.2.1/32 any log
- 30 permit ip 192.0.2.3/32 any log
- 20 permit ip 192.0.2.2/32 any log
- 40 permit ip 192.0.2.4/32 any log
parents: ip access-list test
before: no ip access-list test
match: strict
@ -30,19 +30,19 @@
that:
- "result.changed == true"
- "'ip access-list test' in result.updates"
- "'10 permit ip 1.1.1.1/32 any log' in result.updates"
- "'20 permit ip 2.2.2.2/32 any log' in result.updates"
- "'30 permit ip 3.3.3.3/32 any log' in result.updates"
- "'40 permit ip 4.4.4.4/32 any log' in result.updates"
- "'50 permit ip 5.5.5.5/32 any log' not in result.updates"
- "'10 permit ip 192.0.2.1/32 any log' in result.updates"
- "'20 permit ip 192.0.2.2/32 any log' in result.updates"
- "'30 permit ip 192.0.2.3/32 any log' in result.updates"
- "'40 permit ip 192.0.2.4/32 any log' in result.updates"
- "'50 permit ip 192.0.2.5/32 any log' not in result.updates"
- name: check sub level command using strict match
nxos_config:
lines:
- 10 permit ip 1.1.1.1/32 any log
- 20 permit ip 2.2.2.2/32 any log
- 30 permit ip 3.3.3.3/32 any log
- 40 permit ip 4.4.4.4/32 any log
- 10 permit ip 192.0.2.1/32 any log
- 20 permit ip 192.0.2.2/32 any log
- 30 permit ip 192.0.2.3/32 any log
- 40 permit ip 192.0.2.4/32 any log
parents: ip access-list test
match: strict
register: result

View file

@ -9,11 +9,11 @@
- name: "nxos_config sanity test"
nxos_config:
lines:
- 10 permit ip 1.1.1.1/32 any log
- 20 permit ip 2.2.2.2/32 any log
- 30 permit ip 3.3.3.3/32 any log
- 40 permit ip 4.4.4.4/32 any log
- 50 permit ip 5.5.5.5/32 any log
- 10 permit ip 192.0.2.1/32 any log
- 20 permit ip 192.0.2.2/32 any log
- 30 permit ip 192.0.2.3/32 any log
- 40 permit ip 192.0.2.4/32 any log
- 50 permit ip 192.0.2.5/32 any log
parents: ip access-list test
before: no ip access-list test
match: exact
@ -21,10 +21,10 @@
- name: "nxos_config sanity test - replace block"
nxos_config:
lines:
- 10 permit ip 1.1.1.1/32 any log
- 20 permit ip 2.2.2.2/32 any log
- 30 permit ip 3.3.3.3/32 any log
- 40 permit ip 4.4.4.4/32 any log
- 10 permit ip 192.0.2.1/32 any log
- 20 permit ip 192.0.2.2/32 any log
- 30 permit ip 192.0.2.3/32 any log
- 40 permit ip 192.0.2.4/32 any log
parents: ip access-list test
before: no ip access-list test
replace: block

View file

@ -10,10 +10,10 @@
- name: configure sub level command using block replace
nxos_config:
lines:
- 10 permit ip 1.1.1.1/32 any log
- 20 permit ip 2.2.2.2/32 any log
- 30 permit ip 3.3.3.3/32 any log
- 40 permit ip 4.4.4.4/32 any log
- 10 permit ip 192.0.2.1/32 any log
- 20 permit ip 192.0.2.2/32 any log
- 30 permit ip 192.0.2.3/32 any log
- 40 permit ip 192.0.2.4/32 any log
parents: ip access-list test
replace: block
register: result
@ -22,18 +22,18 @@
that:
- "result.changed == true"
- "'ip access-list test' in result.updates"
- "'10 permit ip 1.1.1.1/32 any log' in result.updates"
- "'20 permit ip 2.2.2.2/32 any log' in result.updates"
- "'30 permit ip 3.3.3.3/32 any log' in result.updates"
- "'40 permit ip 4.4.4.4/32 any log' in result.updates"
- "'10 permit ip 192.0.2.1/32 any log' in result.updates"
- "'20 permit ip 192.0.2.2/32 any log' in result.updates"
- "'30 permit ip 192.0.2.3/32 any log' in result.updates"
- "'40 permit ip 192.0.2.4/32 any log' in result.updates"
- name: check sub level command using block replace
nxos_config:
lines:
- 10 permit ip 1.1.1.1/32 any log
- 20 permit ip 2.2.2.2/32 any log
- 30 permit ip 3.3.3.3/32 any log
- 40 permit ip 4.4.4.4/32 any log
- 10 permit ip 192.0.2.1/32 any log
- 20 permit ip 192.0.2.2/32 any log
- 30 permit ip 192.0.2.3/32 any log
- 40 permit ip 192.0.2.4/32 any log
parents: ip access-list test
replace: block
register: result

View file

@ -4,11 +4,11 @@
- name: setup
nxos_config:
lines:
- 10 permit ip 1.1.1.1/32 any log
- 20 permit ip 2.2.2.2/32 any log
- 30 permit ip 3.3.3.3/32 any log
- 40 permit ip 4.4.4.4/32 any log
- 50 permit ip 5.5.5.5/32 any log
- 10 permit ip 192.0.2.1/32 any log
- 20 permit ip 192.0.2.2/32 any log
- 30 permit ip 192.0.2.3/32 any log
- 40 permit ip 192.0.2.4/32 any log
- 50 permit ip 192.0.2.5/32 any log
parents: ip access-list test
match: none
ignore_errors: yes
@ -16,10 +16,10 @@
- name: configure sub level command using exact match
nxos_config:
lines:
- 10 permit ip 1.1.1.1/32 any log
- 20 permit ip 2.2.2.2/32 any log
- 30 permit ip 3.3.3.3/32 any log
- 40 permit ip 4.4.4.4/32 any log
- 10 permit ip 192.0.2.1/32 any log
- 20 permit ip 192.0.2.2/32 any log
- 30 permit ip 192.0.2.3/32 any log
- 40 permit ip 192.0.2.4/32 any log
parents: ip access-list test
before: no ip access-list test
match: exact
@ -30,19 +30,19 @@
that:
- "result.changed == true"
- "'ip access-list test' in result.updates"
- "'10 permit ip 1.1.1.1/32 any log' in result.updates"
- "'20 permit ip 2.2.2.2/32 any log' in result.updates"
- "'30 permit ip 3.3.3.3/32 any log' in result.updates"
- "'40 permit ip 4.4.4.4/32 any log' in result.updates"
- "'50 permit ip 5.5.5.5/32 any log' not in result.updates"
- "'10 permit ip 192.0.2.1/32 any log' in result.updates"
- "'20 permit ip 192.0.2.2/32 any log' in result.updates"
- "'30 permit ip 192.0.2.3/32 any log' in result.updates"
- "'40 permit ip 192.0.2.4/32 any log' in result.updates"
- "'50 permit ip 192.0.2.5/32 any log' not in result.updates"
- name: check sub level command using exact match
nxos_config:
lines:
- 10 permit ip 1.1.1.1/32 any log
- 20 permit ip 2.2.2.2/32 any log
- 30 permit ip 3.3.3.3/32 any log
- 40 permit ip 4.4.4.4/32 any log
- 10 permit ip 192.0.2.1/32 any log
- 20 permit ip 192.0.2.2/32 any log
- 30 permit ip 192.0.2.3/32 any log
- 40 permit ip 192.0.2.4/32 any log
parents: ip access-list test
match: exact
register: result

View file

@ -4,21 +4,21 @@
- name: setup
nxos_config:
lines:
- 10 permit ip 1.1.1.1/32 any log
- 20 permit ip 2.2.2.2/32 any log
- 30 permit ip 3.3.3.3/32 any log
- 40 permit ip 4.4.4.4/32 any log
- 50 permit ip 5.5.5.5/32 any log
- 10 permit ip 192.0.2.1/32 any log
- 20 permit ip 192.0.2.2/32 any log
- 30 permit ip 192.0.2.3/32 any log
- 40 permit ip 192.0.2.4/32 any log
- 50 permit ip 192.0.2.5/32 any log
parents: ip access-list test
match: none
- name: configure sub level command using strict match
nxos_config:
lines:
- 10 permit ip 1.1.1.1/32 any log
- 30 permit ip 2.2.2.2/32 any log
- 20 permit ip 3.3.3.3/32 any log
- 40 permit ip 4.4.4.4/32 any log
- 10 permit ip 192.0.2.1/32 any log
- 30 permit ip 192.0.2.2/32 any log
- 20 permit ip 192.0.2.3/32 any log
- 40 permit ip 192.0.2.4/32 any log
parents: ip access-list test
before: no ip access-list test
match: strict
@ -29,19 +29,19 @@
that:
- "result.changed == true"
- "'ip access-list test' in result.updates"
- "'10 permit ip 1.1.1.1/32 any log' in result.updates"
- "'30 permit ip 2.2.2.2/32 any log' in result.updates"
- "'20 permit ip 3.3.3.3/32 any log' in result.updates"
- "'40 permit ip 4.4.4.4/32 any log' in result.updates"
- "'50 permit ip 5.5.5.5/32 any log' not in result.updates"
- "'10 permit ip 192.0.2.1/32 any log' in result.updates"
- "'30 permit ip 192.0.2.2/32 any log' in result.updates"
- "'20 permit ip 192.0.2.3/32 any log' in result.updates"
- "'40 permit ip 192.0.2.4/32 any log' in result.updates"
- "'50 permit ip 192.0.2.5/32 any log' not in result.updates"
- name: check sub level command using strict match
nxos_config:
lines:
- 10 permit ip 1.1.1.1/32 any log
- 20 permit ip 3.3.3.3/32 any log
- 30 permit ip 2.2.2.2/32 any log
- 40 permit ip 4.4.4.4/32 any log
- 10 permit ip 192.0.2.1/32 any log
- 20 permit ip 192.0.2.3/32 any log
- 30 permit ip 192.0.2.2/32 any log
- 40 permit ip 192.0.2.4/32 any log
parents: ip access-list test
match: strict
register: result

View file

@ -31,7 +31,7 @@
route_target_export:
- auto
- "5000:10"
- "1.1.1.1:43"
- "192.0.2.1:43"
register: result
- assert: &true

View file

@ -57,7 +57,7 @@
nxos_hsrp: &conf100
group: 100
version: 2
vip: 2.2.2.2
vip: 192.0.2.2
priority: 25
interface: "{{ intname1 }}"
preempt: enabled
@ -96,7 +96,7 @@
- name: "configure group 200"
nxos_hsrp: &conf200
group: 200
vip: 3.3.3.3
vip: 192.0.2.3
version: 1
interface: "{{ intname2 }}"
auth_type: text
@ -114,7 +114,7 @@
- name: "change group 200"
nxos_hsrp: &chg200
group: 200
vip: 3.3.3.3
vip: 192.0.2.3
version: 2
interface: "{{ intname2 }}"
auth_type: text

View file

@ -50,7 +50,7 @@
group_timeout: 300
# deprecated
oif_prefix: 239.255.255.2
oif_source: 1.1.1.1
oif_source: 192.0.2.1
state: present
register: result
@ -82,7 +82,7 @@
oif_ps:
- {'prefix': '238.2.2.6'}
- {'prefix': '238.2.2.5'}
- {'source': '1.1.1.1', 'prefix': '238.2.2.5'}
- {'source': '192.0.2.1', 'prefix': '238.2.2.5'}
state: present
register: result

View file

@ -209,7 +209,7 @@
nxos_interface_ospf: &configurelb
interface: LOOPBACK55
ospf: 1
area: 4.4.4.4
area: 192.0.2.4
cost: 55
hello_interval: 15
dead_interval: 75

View file

@ -9,7 +9,7 @@
key_id: 32
prefer: disabled
vrf_name: management
source_addr: 5.5.5.5
source_addr: 192.0.2.5
state: absent
ignore_errors: yes
@ -21,7 +21,7 @@
key_id: 32
prefer: enabled
vrf_name: management
source_addr: 5.5.5.5
source_addr: 192.0.2.5
state: present
register: result

View file

@ -13,7 +13,7 @@
- name: Configure ospf vrf
nxos_ospf_vrf: &config
ospf: 1
router_id: 1.1.1.1
router_id: 192.0.2.1
timer_throttle_spf_start: 50
timer_throttle_spf_hold: 1000
timer_throttle_spf_max: 2000

View file

@ -70,10 +70,10 @@
- name: configure sub level command using block replace - exact
nxos_config:
lines:
- 10 permit ip 1.1.1.1/32 any log
- 20 permit ip 2.2.2.2/32 any log
- 30 permit ip 3.3.3.3/32 any log
- 40 permit ip 4.4.4.4/32 any log
- 10 permit ip 192.0.2.1/32 any log
- 20 permit ip 192.0.2.2/32 any log
- 30 permit ip 192.0.2.3/32 any log
- 40 permit ip 192.0.2.4/32 any log
parents: ip access-list test
replace: block
provider: "{{ connection }}"
@ -84,19 +84,19 @@
that:
- "result.changed == true"
- "'ip access-list test' in result.updates"
- "'10 permit ip 1.1.1.1/32 any log' in result.updates"
- "'20 permit ip 2.2.2.2/32 any log' in result.updates"
- "'30 permit ip 3.3.3.3/32 any log' in result.updates"
- "'40 permit ip 4.4.4.4/32 any log' in result.updates"
- "'10 permit ip 192.0.2.1/32 any log' in result.updates"
- "'20 permit ip 192.0.2.2/32 any log' in result.updates"
- "'30 permit ip 192.0.2.3/32 any log' in result.updates"
- "'40 permit ip 192.0.2.4/32 any log' in result.updates"
# hit NetworkConfig._diff_strict
- name: configure sub level command using block replace strict
nxos_config:
lines:
- 10 permit ip 1.1.1.1/32 any log
- 20 permit ip 2.2.2.2/32 any log
- 30 permit ip 3.3.3.3/32 any log
- 40 permit ip 4.4.4.4/32 any log
- 10 permit ip 192.0.2.1/32 any log
- 20 permit ip 192.0.2.2/32 any log
- 30 permit ip 192.0.2.3/32 any log
- 40 permit ip 192.0.2.4/32 any log
parents: ip access-list test
replace: block
provider: "{{ connection }}"
@ -111,7 +111,7 @@
- name: create static route
nxos_static_route: &configure
prefix: "192.168.20.64/24"
next_hop: "3.3.3.3"
next_hop: "192.0.2.3"
route_name: testing
pref: 100
tag: 5500
@ -126,7 +126,7 @@
- name: remove static route
nxos_static_route: &remove
prefix: "192.168.20.64/24"
next_hop: "3.3.3.3"
next_hop: "192.0.2.3"
route_name: testing
pref: 100
tag: 5500
@ -141,7 +141,7 @@
- name: remove static route
nxos_static_route:
prefix: "192.168.20.64/24"
next_hop: "3.3.3.3"
next_hop: "192.0.2.3"
route_name: testing
pref: 100
tag: 5500
@ -153,8 +153,8 @@
- name: remove static route aggregate
nxos_static_route:
aggregate:
- { prefix: "192.168.22.64/24", next_hop: "3.3.3.3" }
- { prefix: "192.168.24.64/24", next_hop: "3.3.3.3" }
- { prefix: "192.168.22.64/24", next_hop: "192.0.2.3" }
- { prefix: "192.168.24.64/24", next_hop: "192.0.2.3" }
state: absent
provider: "{{ connection }}"
ignore_errors: yes

View file

@ -12,7 +12,7 @@
- name: Setup - Remove snmp_host if configured
nxos_snmp_host: &remove
snmp_host: 3.3.3.3
snmp_host: 192.0.2.3
community: TESTING
version: "{{ snmp_version }}"
snmp_type: "{{ snmp_type }}"
@ -27,7 +27,7 @@
- name: Configure snmp host
nxos_snmp_host: &config
snmp_host: 3.3.3.3
snmp_host: 192.0.2.3
community: TESTING
version: "{{ snmp_version }}"
snmp_type: "{{ snmp_type }}"
@ -53,7 +53,7 @@
- block:
- name: Add another vrf to filter
nxos_snmp_host: &config1
snmp_host: 3.3.3.3
snmp_host: 192.0.2.3
vrf_filter: default
udp: 222
state: present
@ -70,7 +70,7 @@
- name: remove some configuration
nxos_snmp_host: &rem1
snmp_host: 3.3.3.3
snmp_host: 192.0.2.3
udp: 222
src_intf: "{{ intname|default(omit) }}"
vrf: management
@ -89,7 +89,7 @@
- block:
- name: remove some more configuration
nxos_snmp_host: &rem2
snmp_host: 3.3.3.3
snmp_host: 192.0.2.3
udp: 222
vrf_filter: default
state: absent

View file

@ -12,7 +12,7 @@
- name: Setup - Remove snmp_host if configured
nxos_snmp_host: &remove
snmp_host: 3.3.3.3
snmp_host: 192.0.2.3
community: TESTING
version: "{{ snmp_version }}"
snmp_type: "{{ snmp_type }}"
@ -27,7 +27,7 @@
- name: Configure snmp host
nxos_snmp_host: &config
snmp_host: 3.3.3.3
snmp_host: 192.0.2.3
community: TESTING
version: "{{ snmp_version }}"
snmp_type: "{{ snmp_type }}"
@ -53,7 +53,7 @@
- block:
- name: Add another vrf to filter
nxos_snmp_host: &config1
snmp_host: 3.3.3.3
snmp_host: 192.0.2.3
vrf_filter: default
udp: 222
state: present
@ -70,7 +70,7 @@
- name: remove some configuration
nxos_snmp_host: &rem1
snmp_host: 3.3.3.3
snmp_host: 192.0.2.3
udp: 222
src_intf: "{{ intname|default(omit) }}"
vrf: management
@ -89,7 +89,7 @@
- block:
- name: remove some more configuration
nxos_snmp_host: &rem2
snmp_host: 3.3.3.3
snmp_host: 192.0.2.3
udp: 222
vrf_filter: default
state: absent

View file

@ -17,7 +17,7 @@
- name: Setup - Remove snmp_host if configured
nxos_snmp_host: &remove
snmp_host: 3.3.3.3
snmp_host: 192.0.2.3
community: TESTING
version: "{{ snmp_version }}"
snmp_type: "{{ snmp_type }}"
@ -32,7 +32,7 @@
- name: Configure snmp host
nxos_snmp_host: &config
snmp_host: 3.3.3.3
snmp_host: 192.0.2.3
community: TESTING
v3: "{{ snmp_auth|default(omit) }}"
version: "{{ snmp_version }}"
@ -58,7 +58,7 @@
- block:
- name: Add another vrf to filter
nxos_snmp_host: &config1
snmp_host: 3.3.3.3
snmp_host: 192.0.2.3
vrf_filter: default
state: present
register: result
@ -74,7 +74,7 @@
- name: remove some configuration
nxos_snmp_host: &rem1
snmp_host: 3.3.3.3
snmp_host: 192.0.2.3
src_intf: "{{ intname|default(omit) }}"
vrf: management
vrf_filter: management
@ -92,7 +92,7 @@
- block:
- name: remove some more configuration
nxos_snmp_host: &rem2
snmp_host: 3.3.3.3
snmp_host: 192.0.2.3
vrf_filter: default
state: absent
register: result

View file

@ -13,7 +13,7 @@
- name: Setup - Remove snmp_host if configured
nxos_snmp_host: &remove
snmp_host: 3.3.3.3
snmp_host: 192.0.2.3
community: TESTING
udp: 222
v3: "{{ snmp_auth|default(omit) }}"
@ -29,7 +29,7 @@
- name: Configure snmp host
nxos_snmp_host: &config
snmp_host: 3.3.3.3
snmp_host: 192.0.2.3
community: TESTING
udp: 222
v3: "{{ snmp_auth|default(omit) }}"
@ -56,7 +56,7 @@
- block:
- name: Add another vrf to filter
nxos_snmp_host: &config1
snmp_host: 3.3.3.3
snmp_host: 192.0.2.3
udp: 222
vrf_filter: default
state: present
@ -73,7 +73,7 @@
- name: remove some configuration
nxos_snmp_host: &rem1
snmp_host: 3.3.3.3
snmp_host: 192.0.2.3
udp: 222
src_intf: "{{ intname|default(omit) }}"
vrf: management
@ -92,7 +92,7 @@
- block:
- name: remove some more configuration
nxos_snmp_host: &rem2
snmp_host: 3.3.3.3
snmp_host: 192.0.2.3
udp: 222
vrf_filter: default
state: absent

View file

@ -7,7 +7,7 @@
- name: create static route
nxos_static_route: &configure
prefix: "192.168.20.64/24"
next_hop: "3.3.3.3"
next_hop: "192.0.2.3"
route_name: testing
pref: 100
tag: 5500
@ -31,7 +31,7 @@
- name: change static route
nxos_static_route: &configure1
prefix: "192.168.20.64/24"
next_hop: "3.3.3.3"
next_hop: "192.0.2.3"
route_name: default
pref: 10
tag: default
@ -51,7 +51,7 @@
- name: remove static route
nxos_static_route: &remove
prefix: "192.168.20.64/24"
next_hop: "3.3.3.3"
next_hop: "192.0.2.3"
route_name: testing
pref: 100
vrf: "{{ item }}"
@ -71,8 +71,8 @@
- name: configure static route(aggregate)
nxos_static_route: &conf_agg
aggregate:
- { prefix: "192.168.22.64/24", next_hop: "3.3.3.3" }
- { prefix: "192.168.24.64/24", next_hop: "3.3.3.3" }
- { prefix: "192.168.22.64/24", next_hop: "192.0.2.3" }
- { prefix: "192.168.24.64/24", next_hop: "192.0.2.3" }
register: result
- assert:
@ -90,8 +90,8 @@
- name: remove static route aggregate
nxos_static_route: &remove_agg
aggregate:
- { prefix: "192.168.22.64/24", next_hop: "3.3.3.3" }
- { prefix: "192.168.24.64/24", next_hop: "3.3.3.3" }
- { prefix: "192.168.22.64/24", next_hop: "192.0.2.3" }
- { prefix: "192.168.24.64/24", next_hop: "192.0.2.3" }
state: absent
register: result
@ -111,7 +111,7 @@
- name: remove static route
nxos_static_route:
prefix: "192.168.20.64/24"
next_hop: "3.3.3.3"
next_hop: "192.0.2.3"
route_name: testing
pref: 100
tag: 5500
@ -123,8 +123,8 @@
- name: remove static route aggregate
nxos_static_route:
aggregate:
- { prefix: "192.168.22.64/24", next_hop: "3.3.3.3" }
- { prefix: "192.168.24.64/24", next_hop: "3.3.3.3" }
- { prefix: "192.168.22.64/24", next_hop: "192.0.2.3" }
- { prefix: "192.168.24.64/24", next_hop: "192.0.2.3" }
state: absent
ignore_errors: yes

View file

@ -4,32 +4,32 @@
- name: setup
nxos_config: &reset
lines:
- no ip name-server 1.1.1.1
- no ip name-server 2.2.2.2
- no ip name-server 3.3.3.3
- no ip name-server 192.0.2.1
- no ip name-server 192.0.2.2
- no ip name-server 192.0.2.3
match: none
- name: configure name_servers
nxos_system:
name_servers:
- 1.1.1.1
- 2.2.2.2
- 3.3.3.3
- 192.0.2.1
- 192.0.2.2
- 192.0.2.3
register: result
- assert:
that:
- result.changed == true
- "'ip name-server 1.1.1.1' in result.commands"
- "'ip name-server 2.2.2.2' in result.commands"
- "'ip name-server 3.3.3.3' in result.commands"
- "'ip name-server 192.0.2.1' in result.commands"
- "'ip name-server 192.0.2.2' in result.commands"
- "'ip name-server 192.0.2.3' in result.commands"
- name: verify name_servers
nxos_system:
name_servers:
- 1.1.1.1
- 2.2.2.2
- 3.3.3.3
- 192.0.2.1
- 192.0.2.2
- 192.0.2.3
register: result
- assert:
@ -39,24 +39,24 @@
#- name: change to vrf
# nxos_system:
# name_servers:
# - 1.1.1.1
# - { server: 2.2.2.2, vrf: ansible }
# - 3.3.3.3
# - 192.0.2.1
# - { server: 192.0.2.2, vrf: ansible }
# - 192.0.2.3
# register: result
#- assert:
# that:
# - result.changed == true
# - result.commands|length == 2
# - "'no ip name-server 2.2.2.2' in result.commands"
# - "'ip name-server 2.2.2.2 vrf ansible' in result.commands"
# - "'no ip name-server 192.0.2.2' in result.commands"
# - "'ip name-server 192.0.2.2 vrf ansible' in result.commands"
#- name: verify change to vrf
# nxos_system:
# name_servers:
# - 1.1.1.1
# - { server: 2.2.2.2, vrf: ansible }
# - 3.3.3.3
# - 192.0.2.1
# - { server: 192.0.2.2, vrf: ansible }
# - 192.0.2.3
# register: result
#
#- assert:
@ -66,15 +66,15 @@
- name: remove one
nxos_system:
name_servers:
- 1.1.1.1
- 2.2.2.2
- 192.0.2.1
- 192.0.2.2
register: result
- assert:
that:
- result.changed == true
- result.commands|length == 1
- "'no ip name-server 3.3.3.3' in result.commands"
- "'no ip name-server 192.0.2.3' in result.commands"
- name: default name server
nxos_system: &defns

View file

@ -11,31 +11,31 @@
match: none
ignore_errors: yes
with_items:
- 1.1.1.1
- 2.2.2.2
- 3.3.3.3
- 192.0.2.1
- 192.0.2.2
- 192.0.2.3
- name: configure name_servers
nxos_system:
name_servers:
- 1.1.1.1
- 2.2.2.2
- 3.3.3.3
- 192.0.2.1
- 192.0.2.2
- 192.0.2.3
register: result
- assert:
that:
- result.changed == true
- "'ip name-server 1.1.1.1' in result.commands"
- "'ip name-server 2.2.2.2' in result.commands"
- "'ip name-server 3.3.3.3' in result.commands"
- "'ip name-server 192.0.2.1' in result.commands"
- "'ip name-server 192.0.2.2' in result.commands"
- "'ip name-server 192.0.2.3' in result.commands"
- name: verify name_servers
nxos_system:
name_servers:
- 1.1.1.1
- 2.2.2.2
- 3.3.3.3
- 192.0.2.1
- 192.0.2.2
- 192.0.2.3
register: result
- assert:
@ -45,24 +45,24 @@
#- name: change to vrf
# nxos_system:
# name_servers:
# - 1.1.1.1
# - { server: 2.2.2.2, vrf: ansible }
# - 3.3.3.3
# - 192.0.2.1
# - { server: 192.0.2.2, vrf: ansible }
# - 192.0.2.3
# register: result
#- assert:
# that:
# - result.changed == true
# - result.commands|length == 2
# - "'no ip name-server 2.2.2.2' in result.commands"
# - "'ip name-server 2.2.2.2 vrf ansible' in result.commands"
# - "'no ip name-server 192.0.2.2' in result.commands"
# - "'ip name-server 192.0.2.2 vrf ansible' in result.commands"
#- name: verify change to vrf
# nxos_system:
# name_servers:
# - 1.1.1.1
# - { server: 2.2.2.2, vrf: ansible }
# - 3.3.3.3
# - 192.0.2.1
# - { server: 192.0.2.2, vrf: ansible }
# - 192.0.2.3
# register: result
#
#- assert:
@ -72,15 +72,15 @@
- name: remove one
nxos_system:
name_servers:
- 1.1.1.1
- 2.2.2.2
- 192.0.2.1
- 192.0.2.2
register: result
- assert:
that:
- result.changed == true
- result.commands|length == 1
- "'no ip name-server 3.3.3.3' in result.commands"
- "'no ip name-server 192.0.2.3' in result.commands"
- name: default name server
nxos_system: &defns
@ -102,9 +102,9 @@
- name: teardown
nxos_config: *reset
with_items:
- 1.1.1.1
- 2.2.2.2
- 3.3.3.3
- 192.0.2.1
- 192.0.2.2
- 192.0.2.3
ignore_errors: yes
- debug: msg="END nxapi/set_name_servers.yaml"

View file

@ -179,10 +179,10 @@
interface: nve1
vni: 8000
peer_list:
- 1.1.1.1
- 2.2.2.2
- 3.3.3.3
- 4.4.4.4
- 192.0.2.1
- 192.0.2.2
- 192.0.2.3
- 192.0.2.4
ingress_replication: static
register: result

View file

@ -4,33 +4,33 @@
- name: setup
vyos_config:
lines:
- delete system name-server 1.1.1.1
- delete system name-server 2.2.2.2
- delete system name-server 3.3.3.3
- delete system name-server 192.0.2.1
- delete system name-server 192.0.2.2
- delete system name-server 192.0.2.3
match: none
- name: configure name servers
vyos_system:
name_servers:
- 1.1.1.1
- 2.2.2.2
- 3.3.3.3
- 192.0.2.1
- 192.0.2.2
- 192.0.2.3
register: result
- assert:
that:
- result.changed == true
- result.commands|length == 3
- result.commands[0] is search("set system name-server '1.1.1.1'")
- result.commands[1] is search("set system name-server '2.2.2.2'")
- result.commands[2] is search("set system name-server '3.3.3.3'")
- result.commands[0] is search("set system name-server '192.0.2.1'")
- result.commands[1] is search("set system name-server '192.0.2.2'")
- result.commands[2] is search("set system name-server '192.0.2.3'")
- name: verify name_servers
vyos_system:
name_servers:
- 1.1.1.1
- 2.2.2.2
- 3.3.3.3
- 192.0.2.1
- 192.0.2.2
- 192.0.2.3
register: result
- assert:
@ -40,7 +40,7 @@
- name: remove one
vyos_system:
name_servers:
- 3.3.3.3
- 192.0.2.3
state: absent
register: result
@ -48,14 +48,14 @@
that:
- result.changed == true
- result.commands|length == 1
- result.commands[0] is search("delete system name-server '3.3.3.3'")
- result.commands[0] is search("delete system name-server '192.0.2.3'")
- name: teardown
vyos_config:
lines:
- delete system name-server name-server 1.1.1.1
- delete system name-server name-server 2.2.2.2
- delete system name-server name-server 3.3.3.3
- delete system name-server name-server 192.0.2.1
- delete system name-server name-server 192.0.2.2
- delete system name-server name-server 192.0.2.3
match: none
- debug: msg="END cli/basic.yaml on connection={{ ansible_connection }}"

View file

@ -7,24 +7,24 @@
- name: setup
vyos_config:
lines:
- delete system name-server 1.1.1.1
- delete system name-server 192.0.2.1
match: none
- name: configure name servers using platform agnostic module
net_system:
name_servers:
- 1.1.1.1
- 192.0.2.1
register: result
- assert:
that:
- result.changed == true
- result.commands[0] is search("set system name-server '1.1.1.1'")
- result.commands[0] is search("set system name-server '192.0.2.1'")
- name: setup
vyos_config:
lines:
- delete system name-server 1.1.1.1
- delete system name-server 192.0.2.1
match: none
- debug: msg="END vyos cli/net_system.yaml on connection={{ ansible_connection }}"

View file

@ -2,9 +2,9 @@
! Last configuration change at Jan 11 12:26:08 2018
!
snmp-server contact http://www.dell.com/support
snmp-server host 1.1.1.1 traps version 1 c4 udp-port 5
snmp-server host 1.1.1.1 traps version 2c c1 udp-port 4
snmp-server host 2.2.2.2 traps version 1 c3 udp-port 162
snmp-server host 192.0.2.1 traps version 1 c4 udp-port 5
snmp-server host 192.0.2.1 traps version 2c c1 udp-port 4
snmp-server host 192.0.2.2 traps version 1 c3 udp-port 162
ip community-list expanded commex deny aaa
ip community-list standard commstd deny internet
ip community-list standard commstd permit no-advertise

View file

@ -8,7 +8,7 @@ Interface State IP Address IP Mask Method
Vl1 Down 0.0.0.0 0.0.0.0 None
Vl2 Up 0.0.0.0 0.0.0.0 DHCP
Vl99 Up 10.99.1.2 255.255.0.0 Manual
Vl100 Up 3.3.3.3 255.255.255.0 Manual
Vl100 Up 192.0.2.3 255.255.255.0 Manual
Vl999 Up 10.250.1.2 255.255.255.0 Manual
Vl1010 Up 10.1.1.1 255.255.255.0 Manual
Vl1681 Up 192.168.100.1 255.255.255.0 Manual

View file

@ -99,7 +99,7 @@ snmp-server enable traps captive-portal client-connect
snmp-server enable traps captive-portal client-db-full
snmp-server enable traps captive-portal client-disconnect
router bgp 11
bgp router-id 1.1.1.1
bgp router-id 192.0.2.1
maximum-paths 2
maximum-paths ibgp 2
network 101.1.2.0 mask 255.255.255.0

View file

@ -1,4 +1,4 @@
LSP LSP1, to 1.1.1.1
LSP LSP1, to 192.0.2.1
From: (n/a), admin: DOWN, status: DOWN
revert timer: 300 seconds
Times primary LSP goes up since enabled: 1
@ -17,7 +17,7 @@ LSP LSP1, to 1.1.1.1
Backup LSP: DOWN
Global revertiveness enabled with hold time 5 secs
FRR Forwarding State: Pri(down), Backup(down)
LSP LSP3, to 3.3.3.3
LSP LSP3, to 192.0.2.3
From: (n/a), admin: DOWN, status: DOWN
Times primary LSP goes up since enabled: 0
Metric: 0

View file

@ -9,7 +9,7 @@ VLL TEST-VLL, VC-ID 111, VLL-INDEX 4
COS : 1
Extended Counters: Enabled
Vll-Peer : 1.1.1.1
Vll-Peer : 192.0.2.1
State : DOWN - PW is Down (Reason:Wait for peer label)
Remote VC type : -- Remote VC MTU : --
Local label : -- Remote label : --

View file

@ -10,7 +10,7 @@ VPLS TEST-VPLS, Id 333, Max mac entries: 2048
Untagged: ethe 2/7
VC-Mode: Raw
Total VPLS peers: 1 (0 Operational)
Peer address: 3.3.3.3, State: Wait for functional local ports
Peer address: 192.0.2.3, State: Wait for functional local ports
Tnnl in use: tnl1(3)[RSVP] Peer Index:0
Local VC lbl: N/A, Remote VC lbl: N/A
Local VC MTU: 9190, Remote VC MTU: 0

View file

@ -43,14 +43,14 @@ qos-mapping
default-max-frame-size 9216
cpu-usage on
aaa authentication login default tacacs+ local enable
tacacs-server host 5.5.5.5
tacacs-server host 192.0.2.5
tacacs-server key 2 $X3FSZjgzKGzPIXVd
!
!
enable password-display
enable super-user-password 8 $1$WV1..Pi2$B6acbjDxeHsof2BKrpyqQ0
enable aaa console
logging host 5.5.5.5
logging host 192.0.2.5
logging facility local7
logging buffered 5000
logging console
@ -244,13 +244,13 @@ router mpls
cos 1
lsp LSP1
to 1.1.1.1
to 192.0.2.1
no cspf
adaptive
enable
lsp LSP3
to 3.3.3.3
to 192.0.2.3
shortcuts isis level2
adaptive
reoptimize-timer 1800
@ -260,7 +260,7 @@ router mpls
enable
vll TEST-VLL 111 raw-mode cos 1
vll-peer 1.1.1.1
vll-peer 192.0.2.1
vlan 2005
tagged e 2/1
@ -271,7 +271,7 @@ router mpls
tag e 2/9
vpls TEST-VPLS 333
vpls-peer 3.3.3.3
vpls-peer 192.0.2.3
vlan 5
untagged ethe 2/4
vlan 6

View file

@ -72,7 +72,7 @@ class TestNetscalerCSActionModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
self.nitro_base_patcher.stop()
@ -86,7 +86,7 @@ class TestNetscalerCSActionModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
from ansible.modules.network.netscaler import netscaler_cs_action
@ -112,7 +112,7 @@ class TestNetscalerCSActionModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
from ansible.modules.network.netscaler import netscaler_cs_action
@ -136,7 +136,7 @@ class TestNetscalerCSActionModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
from ansible.modules.network.netscaler import netscaler_cs_action
@ -163,7 +163,7 @@ class TestNetscalerCSActionModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
from ansible.modules.network.netscaler import netscaler_cs_action
@ -190,7 +190,7 @@ class TestNetscalerCSActionModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='absent',
))
from ansible.modules.network.netscaler import netscaler_cs_action
@ -216,7 +216,7 @@ class TestNetscalerCSActionModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
save_config=False,
))
@ -244,7 +244,7 @@ class TestNetscalerCSActionModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='absent',
save_config=False,
))
@ -271,7 +271,7 @@ class TestNetscalerCSActionModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
from ansible.modules.network.netscaler import netscaler_cs_action
@ -303,7 +303,7 @@ class TestNetscalerCSActionModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
from ansible.modules.network.netscaler import netscaler_cs_action
@ -337,7 +337,7 @@ class TestNetscalerCSActionModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='absent',
))
from ansible.modules.network.netscaler import netscaler_cs_action
@ -371,7 +371,7 @@ class TestNetscalerCSActionModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
from ansible.modules.network.netscaler import netscaler_cs_action
@ -405,7 +405,7 @@ class TestNetscalerCSActionModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='absent',
))
from ansible.modules.network.netscaler import netscaler_cs_action
@ -439,7 +439,7 @@ class TestNetscalerCSActionModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
from ansible.modules.network.netscaler import netscaler_cs_action
@ -475,7 +475,7 @@ class TestNetscalerCSActionModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
from ansible.modules.network.netscaler import netscaler_cs_action
@ -511,7 +511,7 @@ class TestNetscalerCSActionModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
from ansible.modules.network.netscaler import netscaler_cs_action
@ -547,7 +547,7 @@ class TestNetscalerCSActionModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='absent',
))
from ansible.modules.network.netscaler import netscaler_cs_action
@ -583,7 +583,7 @@ class TestNetscalerCSActionModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
from ansible.modules.network.netscaler import netscaler_cs_action
@ -611,7 +611,7 @@ class TestNetscalerCSActionModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='absent',
))
from ansible.modules.network.netscaler import netscaler_cs_action

View file

@ -54,7 +54,7 @@ class TestNetscalerCSPolicyModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state=state,
))

View file

@ -79,7 +79,7 @@ class TestNetscalerCSVserverModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
self.nitro_base_patcher.stop()
@ -93,7 +93,7 @@ class TestNetscalerCSVserverModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
from ansible.modules.network.netscaler import netscaler_cs_vserver
@ -119,7 +119,7 @@ class TestNetscalerCSVserverModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
from ansible.modules.network.netscaler import netscaler_cs_vserver
@ -143,7 +143,7 @@ class TestNetscalerCSVserverModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
from ansible.modules.network.netscaler import netscaler_cs_vserver
@ -170,7 +170,7 @@ class TestNetscalerCSVserverModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
from ansible.modules.network.netscaler import netscaler_cs_vserver
@ -200,7 +200,7 @@ class TestNetscalerCSVserverModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='absent',
))
from ansible.modules.network.netscaler import netscaler_cs_vserver
@ -226,7 +226,7 @@ class TestNetscalerCSVserverModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
save_config=False,
))
@ -257,7 +257,7 @@ class TestNetscalerCSVserverModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='absent',
save_config=False,
))
@ -284,7 +284,7 @@ class TestNetscalerCSVserverModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
from ansible.modules.network.netscaler import netscaler_cs_vserver
@ -318,7 +318,7 @@ class TestNetscalerCSVserverModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
from ansible.modules.network.netscaler import netscaler_cs_vserver
@ -354,7 +354,7 @@ class TestNetscalerCSVserverModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='absent',
))
from ansible.modules.network.netscaler import netscaler_cs_vserver
@ -388,7 +388,7 @@ class TestNetscalerCSVserverModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
from ansible.modules.network.netscaler import netscaler_cs_vserver
@ -423,7 +423,7 @@ class TestNetscalerCSVserverModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='absent',
))
from ansible.modules.network.netscaler import netscaler_cs_vserver
@ -457,7 +457,7 @@ class TestNetscalerCSVserverModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
from ansible.modules.network.netscaler import netscaler_cs_vserver
@ -494,7 +494,7 @@ class TestNetscalerCSVserverModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
from ansible.modules.network.netscaler import netscaler_cs_vserver
@ -531,7 +531,7 @@ class TestNetscalerCSVserverModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
from ansible.modules.network.netscaler import netscaler_cs_vserver
@ -567,7 +567,7 @@ class TestNetscalerCSVserverModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='absent',
))
from ansible.modules.network.netscaler import netscaler_cs_vserver
@ -603,7 +603,7 @@ class TestNetscalerCSVserverModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
from ansible.modules.network.netscaler import netscaler_cs_vserver
@ -631,7 +631,7 @@ class TestNetscalerCSVserverModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='absent',
))
from ansible.modules.network.netscaler import netscaler_cs_vserver
@ -659,7 +659,7 @@ class TestNetscalerCSVserverModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
@ -687,7 +687,7 @@ class TestNetscalerCSVserverModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
servicetype='SSL',
))
@ -728,7 +728,7 @@ class TestNetscalerCSVserverModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
from ansible.modules.network.netscaler import netscaler_cs_vserver

View file

@ -80,7 +80,7 @@ class TestNetscalerGSLBSiteModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
self.nitro_base_patcher.stop()
@ -94,7 +94,7 @@ class TestNetscalerGSLBSiteModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
from ansible.modules.network.netscaler import netscaler_gslb_service
@ -120,7 +120,7 @@ class TestNetscalerGSLBSiteModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
from ansible.modules.network.netscaler import netscaler_gslb_service
@ -144,7 +144,7 @@ class TestNetscalerGSLBSiteModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
from ansible.modules.network.netscaler import netscaler_gslb_service
@ -172,7 +172,7 @@ class TestNetscalerGSLBSiteModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
from ansible.modules.network.netscaler import netscaler_gslb_service
@ -199,7 +199,7 @@ class TestNetscalerGSLBSiteModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
from ansible.modules.network.netscaler import netscaler_gslb_service
@ -228,7 +228,7 @@ class TestNetscalerGSLBSiteModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='absent',
))
from ansible.modules.network.netscaler import netscaler_gslb_service
@ -256,7 +256,7 @@ class TestNetscalerGSLBSiteModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
save_config=False,
))
@ -286,7 +286,7 @@ class TestNetscalerGSLBSiteModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='absent',
save_config=False,
))
@ -315,7 +315,7 @@ class TestNetscalerGSLBSiteModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
from ansible.modules.network.netscaler import netscaler_gslb_service
@ -349,7 +349,7 @@ class TestNetscalerGSLBSiteModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
from ansible.modules.network.netscaler import netscaler_gslb_service
@ -386,7 +386,7 @@ class TestNetscalerGSLBSiteModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='absent',
))
from ansible.modules.network.netscaler import netscaler_gslb_service
@ -421,7 +421,7 @@ class TestNetscalerGSLBSiteModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
from ansible.modules.network.netscaler import netscaler_gslb_service
@ -457,7 +457,7 @@ class TestNetscalerGSLBSiteModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='absent',
))
from ansible.modules.network.netscaler import netscaler_gslb_service
@ -493,7 +493,7 @@ class TestNetscalerGSLBSiteModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
from ansible.modules.network.netscaler import netscaler_gslb_service
@ -531,7 +531,7 @@ class TestNetscalerGSLBSiteModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
from ansible.modules.network.netscaler import netscaler_gslb_service
@ -569,7 +569,7 @@ class TestNetscalerGSLBSiteModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
from ansible.modules.network.netscaler import netscaler_gslb_service
@ -606,7 +606,7 @@ class TestNetscalerGSLBSiteModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
from ansible.modules.network.netscaler import netscaler_gslb_service
@ -643,7 +643,7 @@ class TestNetscalerGSLBSiteModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='absent',
))
from ansible.modules.network.netscaler import netscaler_gslb_service
@ -680,7 +680,7 @@ class TestNetscalerGSLBSiteModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
from ansible.modules.network.netscaler import netscaler_gslb_service
@ -709,7 +709,7 @@ class TestNetscalerGSLBSiteModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='absent',
))
from ansible.modules.network.netscaler import netscaler_gslb_service

View file

@ -70,7 +70,7 @@ class TestNetscalerGSLBSiteModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
self.nitro_base_patcher.stop()
@ -84,7 +84,7 @@ class TestNetscalerGSLBSiteModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
from ansible.modules.network.netscaler import netscaler_gslb_site
@ -110,7 +110,7 @@ class TestNetscalerGSLBSiteModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
from ansible.modules.network.netscaler import netscaler_gslb_site
@ -134,7 +134,7 @@ class TestNetscalerGSLBSiteModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
from ansible.modules.network.netscaler import netscaler_gslb_site
@ -161,7 +161,7 @@ class TestNetscalerGSLBSiteModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
from ansible.modules.network.netscaler import netscaler_gslb_site
@ -187,7 +187,7 @@ class TestNetscalerGSLBSiteModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
from ansible.modules.network.netscaler import netscaler_gslb_site
@ -215,7 +215,7 @@ class TestNetscalerGSLBSiteModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='absent',
))
from ansible.modules.network.netscaler import netscaler_gslb_site
@ -242,7 +242,7 @@ class TestNetscalerGSLBSiteModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
save_config=False,
))
@ -271,7 +271,7 @@ class TestNetscalerGSLBSiteModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='absent',
save_config=False,
))
@ -299,7 +299,7 @@ class TestNetscalerGSLBSiteModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
from ansible.modules.network.netscaler import netscaler_gslb_site
@ -332,7 +332,7 @@ class TestNetscalerGSLBSiteModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
from ansible.modules.network.netscaler import netscaler_gslb_site
@ -367,7 +367,7 @@ class TestNetscalerGSLBSiteModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='absent',
))
from ansible.modules.network.netscaler import netscaler_gslb_site
@ -401,7 +401,7 @@ class TestNetscalerGSLBSiteModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
from ansible.modules.network.netscaler import netscaler_gslb_site
@ -436,7 +436,7 @@ class TestNetscalerGSLBSiteModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='absent',
))
from ansible.modules.network.netscaler import netscaler_gslb_site
@ -471,7 +471,7 @@ class TestNetscalerGSLBSiteModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
from ansible.modules.network.netscaler import netscaler_gslb_site
@ -507,7 +507,7 @@ class TestNetscalerGSLBSiteModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
from ansible.modules.network.netscaler import netscaler_gslb_site
@ -543,7 +543,7 @@ class TestNetscalerGSLBSiteModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
from ansible.modules.network.netscaler import netscaler_gslb_site
@ -579,7 +579,7 @@ class TestNetscalerGSLBSiteModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='absent',
))
from ansible.modules.network.netscaler import netscaler_gslb_site
@ -615,7 +615,7 @@ class TestNetscalerGSLBSiteModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
from ansible.modules.network.netscaler import netscaler_gslb_site
@ -643,7 +643,7 @@ class TestNetscalerGSLBSiteModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='absent',
))
from ansible.modules.network.netscaler import netscaler_gslb_site

View file

@ -74,7 +74,7 @@ class TestNetscalerGSLBVserverModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
self.nitro_base_patcher.stop()
@ -88,7 +88,7 @@ class TestNetscalerGSLBVserverModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
from ansible.modules.network.netscaler import netscaler_gslb_vserver
@ -114,7 +114,7 @@ class TestNetscalerGSLBVserverModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
from ansible.modules.network.netscaler import netscaler_gslb_vserver
@ -138,7 +138,7 @@ class TestNetscalerGSLBVserverModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
from ansible.modules.network.netscaler import netscaler_gslb_vserver
@ -165,7 +165,7 @@ class TestNetscalerGSLBVserverModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
from ansible.modules.network.netscaler import netscaler_gslb_vserver
@ -192,7 +192,7 @@ class TestNetscalerGSLBVserverModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
from ansible.modules.network.netscaler import netscaler_gslb_vserver
@ -221,7 +221,7 @@ class TestNetscalerGSLBVserverModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='absent',
))
from ansible.modules.network.netscaler import netscaler_gslb_vserver
@ -248,7 +248,7 @@ class TestNetscalerGSLBVserverModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
save_config=False,
))
@ -278,7 +278,7 @@ class TestNetscalerGSLBVserverModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='absent',
save_config=False,
))
@ -306,7 +306,7 @@ class TestNetscalerGSLBVserverModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
from ansible.modules.network.netscaler import netscaler_gslb_vserver
@ -340,7 +340,7 @@ class TestNetscalerGSLBVserverModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
from ansible.modules.network.netscaler import netscaler_gslb_vserver
@ -378,7 +378,7 @@ class TestNetscalerGSLBVserverModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='absent',
))
from ansible.modules.network.netscaler import netscaler_gslb_vserver
@ -412,7 +412,7 @@ class TestNetscalerGSLBVserverModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
from ansible.modules.network.netscaler import netscaler_gslb_vserver
@ -448,7 +448,7 @@ class TestNetscalerGSLBVserverModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
from ansible.modules.network.netscaler import netscaler_gslb_vserver
@ -486,7 +486,7 @@ class TestNetscalerGSLBVserverModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
from ansible.modules.network.netscaler import netscaler_gslb_vserver
@ -524,7 +524,7 @@ class TestNetscalerGSLBVserverModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='absent',
))
from ansible.modules.network.netscaler import netscaler_gslb_vserver
@ -559,7 +559,7 @@ class TestNetscalerGSLBVserverModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
from ansible.modules.network.netscaler import netscaler_gslb_vserver
@ -596,7 +596,7 @@ class TestNetscalerGSLBVserverModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
from ansible.modules.network.netscaler import netscaler_gslb_vserver
@ -633,7 +633,7 @@ class TestNetscalerGSLBVserverModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
from ansible.modules.network.netscaler import netscaler_gslb_vserver
@ -669,7 +669,7 @@ class TestNetscalerGSLBVserverModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='absent',
))
from ansible.modules.network.netscaler import netscaler_gslb_vserver
@ -705,7 +705,7 @@ class TestNetscalerGSLBVserverModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
from ansible.modules.network.netscaler import netscaler_gslb_vserver
@ -733,7 +733,7 @@ class TestNetscalerGSLBVserverModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='absent',
))
from ansible.modules.network.netscaler import netscaler_gslb_vserver

View file

@ -70,7 +70,7 @@ class TestNetscalerLBVServerModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
self.nitro_base_patcher.stop()
@ -84,7 +84,7 @@ class TestNetscalerLBVServerModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
from ansible.modules.network.netscaler import netscaler_lb_monitor
@ -113,7 +113,7 @@ class TestNetscalerLBVServerModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
from ansible.modules.network.netscaler import netscaler_lb_monitor
@ -135,7 +135,7 @@ class TestNetscalerLBVServerModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
from ansible.modules.network.netscaler import netscaler_lb_monitor
@ -160,7 +160,7 @@ class TestNetscalerLBVServerModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
from ansible.modules.network.netscaler import netscaler_lb_monitor
@ -186,7 +186,7 @@ class TestNetscalerLBVServerModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='absent',
))
from ansible.modules.network.netscaler import netscaler_lb_monitor
@ -212,7 +212,7 @@ class TestNetscalerLBVServerModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
save_config=False,
))
@ -239,7 +239,7 @@ class TestNetscalerLBVServerModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='absent',
save_config=False,
))
@ -266,7 +266,7 @@ class TestNetscalerLBVServerModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
save_config=False,
))
@ -294,7 +294,7 @@ class TestNetscalerLBVServerModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
save_config=False,
))
@ -332,7 +332,7 @@ class TestNetscalerLBVServerModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
save_config=False,
))
@ -358,7 +358,7 @@ class TestNetscalerLBVServerModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
save_config=False,
))
@ -386,7 +386,7 @@ class TestNetscalerLBVServerModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
from ansible.modules.network.netscaler import netscaler_lb_monitor
@ -412,7 +412,7 @@ class TestNetscalerLBVServerModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
from ansible.modules.network.netscaler import netscaler_lb_monitor
@ -440,7 +440,7 @@ class TestNetscalerLBVServerModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='absent',
))
from ansible.modules.network.netscaler import netscaler_lb_monitor
@ -464,7 +464,7 @@ class TestNetscalerLBVServerModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='absent',
))
from ansible.modules.network.netscaler import netscaler_lb_monitor
@ -489,7 +489,7 @@ class TestNetscalerLBVServerModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))

View file

@ -78,7 +78,7 @@ class TestNetscalerLBVServerModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
self.nitro_base_patcher.stop()
@ -92,7 +92,7 @@ class TestNetscalerLBVServerModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
from ansible.modules.network.netscaler import netscaler_lb_vserver
@ -118,7 +118,7 @@ class TestNetscalerLBVServerModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
from ansible.modules.network.netscaler import netscaler_lb_vserver
@ -140,7 +140,7 @@ class TestNetscalerLBVServerModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
from ansible.modules.network.netscaler import netscaler_lb_vserver
@ -166,7 +166,7 @@ class TestNetscalerLBVServerModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
from ansible.modules.network.netscaler import netscaler_lb_vserver
@ -193,7 +193,7 @@ class TestNetscalerLBVServerModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='absent',
))
from ansible.modules.network.netscaler import netscaler_lb_vserver
@ -220,7 +220,7 @@ class TestNetscalerLBVServerModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
save_config=False,
))
@ -248,7 +248,7 @@ class TestNetscalerLBVServerModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='absent',
save_config=False,
))
@ -276,7 +276,7 @@ class TestNetscalerLBVServerModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
save_config=False,
))
@ -307,7 +307,7 @@ class TestNetscalerLBVServerModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
save_config=False,
))
@ -347,7 +347,7 @@ class TestNetscalerLBVServerModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
save_config=False,
))
@ -376,7 +376,7 @@ class TestNetscalerLBVServerModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
save_config=False,
))
@ -406,7 +406,7 @@ class TestNetscalerLBVServerModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
save_config=False,
))
@ -456,7 +456,7 @@ class TestNetscalerLBVServerModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
save_config=False,
))
@ -506,7 +506,7 @@ class TestNetscalerLBVServerModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
save_config=False,
servicetype='SSL',
@ -542,7 +542,7 @@ class TestNetscalerLBVServerModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
save_config=False,
servicetype='HTTP',
@ -577,7 +577,7 @@ class TestNetscalerLBVServerModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
from ansible.modules.network.netscaler import netscaler_lb_vserver
@ -609,7 +609,7 @@ class TestNetscalerLBVServerModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
from ansible.modules.network.netscaler import netscaler_lb_vserver
@ -642,7 +642,7 @@ class TestNetscalerLBVServerModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
from ansible.modules.network.netscaler import netscaler_lb_vserver
@ -673,7 +673,7 @@ class TestNetscalerLBVServerModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
from ansible.modules.network.netscaler import netscaler_lb_vserver
@ -704,7 +704,7 @@ class TestNetscalerLBVServerModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
from ansible.modules.network.netscaler import netscaler_lb_vserver
@ -735,7 +735,7 @@ class TestNetscalerLBVServerModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='absent',
))
from ansible.modules.network.netscaler import netscaler_lb_vserver
@ -759,7 +759,7 @@ class TestNetscalerLBVServerModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='absent',
))
from ansible.modules.network.netscaler import netscaler_lb_vserver
@ -784,7 +784,7 @@ class TestNetscalerLBVServerModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
@ -811,7 +811,7 @@ class TestNetscalerLBVServerModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))

View file

@ -54,7 +54,7 @@ class TestNetscalerSaveConfigModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
))
from ansible.modules.network.netscaler import netscaler_save_config
@ -79,7 +79,7 @@ class TestNetscalerSaveConfigModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
))
from ansible.modules.network.netscaler import netscaler_save_config
@ -102,7 +102,7 @@ class TestNetscalerSaveConfigModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
))
from ansible.modules.network.netscaler import netscaler_save_config
@ -128,7 +128,7 @@ class TestNetscalerSaveConfigModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
))
class MockException(Exception):

View file

@ -70,7 +70,7 @@ class TestNetscalerServerModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
self.nitro_base_patcher.stop()
@ -84,7 +84,7 @@ class TestNetscalerServerModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
from ansible.modules.network.netscaler import netscaler_server
@ -110,7 +110,7 @@ class TestNetscalerServerModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
from ansible.modules.network.netscaler import netscaler_server
@ -134,7 +134,7 @@ class TestNetscalerServerModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
from ansible.modules.network.netscaler import netscaler_server
@ -161,7 +161,7 @@ class TestNetscalerServerModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
from ansible.modules.network.netscaler import netscaler_server
@ -188,7 +188,7 @@ class TestNetscalerServerModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='absent',
))
from ansible.modules.network.netscaler import netscaler_server
@ -215,7 +215,7 @@ class TestNetscalerServerModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
save_config=False,
))
@ -243,7 +243,7 @@ class TestNetscalerServerModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='absent',
save_config=False,
))
@ -270,7 +270,7 @@ class TestNetscalerServerModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
from ansible.modules.network.netscaler import netscaler_server
@ -298,7 +298,7 @@ class TestNetscalerServerModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
disabled=True,
graceful=True
@ -333,7 +333,7 @@ class TestNetscalerServerModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
from ansible.modules.network.netscaler import netscaler_server
@ -365,7 +365,7 @@ class TestNetscalerServerModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
from ansible.modules.network.netscaler import netscaler_server
@ -399,7 +399,7 @@ class TestNetscalerServerModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='absent',
))
from ansible.modules.network.netscaler import netscaler_server
@ -433,7 +433,7 @@ class TestNetscalerServerModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
from ansible.modules.network.netscaler import netscaler_server
@ -467,7 +467,7 @@ class TestNetscalerServerModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='absent',
))
from ansible.modules.network.netscaler import netscaler_server
@ -501,7 +501,7 @@ class TestNetscalerServerModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
from ansible.modules.network.netscaler import netscaler_server
@ -537,7 +537,7 @@ class TestNetscalerServerModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
from ansible.modules.network.netscaler import netscaler_server
@ -573,7 +573,7 @@ class TestNetscalerServerModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
from ansible.modules.network.netscaler import netscaler_server
@ -609,7 +609,7 @@ class TestNetscalerServerModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='absent',
))
from ansible.modules.network.netscaler import netscaler_server
@ -645,7 +645,7 @@ class TestNetscalerServerModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='present',
))
from ansible.modules.network.netscaler import netscaler_server
@ -672,7 +672,7 @@ class TestNetscalerServerModule(TestModule):
set_module_args(dict(
nitro_user='user',
nitro_pass='pass',
nsip='1.1.1.1',
nsip='192.0.2.1',
state='absent',
))
from ansible.modules.network.netscaler import netscaler_server

Some files were not shown because too many files have changed in this diff Show more