Fix for persistent connection plugin on Python3. Note that fixes are also needed to each terminal plugin. This PR only fixes the ios terminal (as proof that this approach is workable.) Future PRs can address the other terminal types.
* On Python3, pickle needs to work with byte strings, not text strings.
* Set the pickle protocol version to 0 because we're using a pty to feed data to the connection plugin. A pty can't have control characters. So we have to send ascii only. That means
only using protocol=0 for pickling the data.
* ansible-connection isn't being used with py3 in the bug but it needs
several changes to work with python3.
* In python3, closing the pty too early causes no data to be sent. So
leave stdin open until after we finish with the ansible-connection
process.
* Fix typo using traceback.format_exc()
* Cleanup unnecessary StringIO, BytesIO, and to_bytes calls
* Modify the network_cli and terminal plugins for py3 compat. Lots of mixing of text and byte strings that needs to be straightened out to be compatible with python3
* Documentation for the bytes<=>text strategy for terminal plugins
* Update unittests for more bytes-oriented internals
Fixes#24355
* New module fortios_address_group
* Fix issue when fortigate don't contain any address group
* Add alias & change member from str to list type
* Fix pep8
* Fix aliases format in doc
* Fix pep8
* Remove duplicate arg spec with module_utils/fortios.py
* Change string format for better compat + better exception catching + cosmetic changes
* Use set, specify exception, RE pattern one time...
* fix pep8
* Improving of nxos_ip_interface module
Added features:
* Route tags for an IP address at interface level with 'tag' option
* Support of IPv4 secondary addresses if option 'allow_secondary' is
true (false by default). If option 'allow_secondary' is true primary
IPv4 address will be replaced
All features support NXAPI and CLI transport, but only with text/raw
output. Currently not possible to get route tags for secondary IPv4/IPv6
addresses from JSON output.
Other changes:
* Module return state 'changed' only when configuration commands were
executed
* Module result includes multiple prefixes if IPv4 addresses were
found
* Fix PEP8 issues
* Addition fix of PEP8 issues
* Remove unused variable from main()
* Fix "proposed" sample in RETURN variable
* Fix "existing" sample in RETURN variable
* Update RETURN variable
Add 'secondary' for every element of 'addresses' list.
* Restore old version number
* Added exception when ipaddress module is imported
* DOCUMENTATION string was updated
* Added 'version_added' for new features
* Added 'requirements' for module
* Added compatibility with latest commit in devel branch
* DOCUMENTATION was fixed
* Improve changes of route tag for existing ip addresses
* Added compatibility with core code
* Fixed mistypes in the DOCUMENTATION variable
* argument_spec fixed
allow_secondary argument type was changed according to allowed choices.
Template can take a directory as the destination. When that's the case,
we need to diff between the source and the file inside of the directory.
That happened when the directory was specified with a trailing slash but
not when it was specified on its own. This change fixes that.
Fixes#24413
For playbook base objects, when dumping attributes via dump_attrs() an
attribute like loop_control is a class. Using the default serialization
for these is slow and consumes a lot of memory. Since LoopControl is also
based on the Base class, we can use serialize() instead and save a lot of
resources.
This also adds a from_attrs() complimentary method to nicely turn the
dumped attrs back into proper field attributes.
Fixes#23579
* [GCP] UrlMap module
This module provides support for UrlMaps on Google Cloud Platform. UrlMaps allow users to segment requests by hostname and path and direct those requests to Backend Services.
UrlMaps are a powerful and necessary part of HTTP(S) Global Load Balancing on Google Cloud Platform.
UrlMap takes advantage of the python-api so the appropriate infrastructure has been added to module_utils.
More about UrlMaps can be found at:
https://cloud.google.com/compute/docs/load-balancing/http/url-map
UrlMap API:
https://cloud.google.com/compute/docs/reference/latest/
Google Cloud Platform HTTP(S) Cross-Region Load Balancer:
https://cloud.google.com/compute/docs/load-balancing/http/
* updated documentation, remmoved parens
* fixed tabs
* Create netconf_config.py
To support new attribute 'src' for the netconf_config module.
Cross-check with #24323
* Update netconf_config.py
* Update netconf_config.py
* switch to boto3 and add support for application ELBs with target groups.
* use py23 compatible dict iterator.
* removing commented out fail_json calls
utilize sets to simplify logic
remove setting a redundant variable
add bounds checking in two places
add AWSRetry decorator - do we want this for other functions too?
change xrange to range so python3 doesn't fail
remove sorting lists of dicts; in python2 this returns None, in python3 this fails
* remove error variable from traceback.format_exc
* Remove boto2-style calls brought in by rebase
Old boto-style calls to `as_group` attributes break in boto3
Also remove module from legacy-PEP8 list
* Add parameter to target_group_arn option
* Fix HAS_BOTO3 check
* use tags.items() instead of iteritems
* import botocore
* Fixed bugs in deleting autoscaling groups
* make changes in deleting autoscaling groups pep8
* more pep8
* fix version
* fix bugs so local integration tests run
* fix launch config check
* reflect changed status for ASG updates
* Fix existing exception handling and use traceback.
Fix imports
* line length
* Fix notification setup
* Fix mutually exclusive arguments
Only one of the AvailabilityZones and VPCZoneIdentifier arguments should be provided to the CreateAutoScalingGroup call.
* Allow desired_capacity, min_size, max_size, launch_config_name to be derived from the existing ASG if not specified
Remove code updating dict after ASG already uses it
* Add new helper function for comparing AWS tag key pair dicts. Also modify boto3_tag_list_to_ansible_dict function to be more generic when looking for key names because AWS sometimes uses 'Key', sometimes 'TagKey' and who knows what the future holds! Fixed modules to work with changes.
* Review changes
* Add some more doc to GUIDELINES for tags and fix var name for snaked values in ec2_group_facts
* nxos_vrf_af fix and unit test
Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>
* ansibot told me to do this
* use sorted() as the test list elements differ in order for python2.x and 3.x
* fixes nxos_evpn_vni
Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>
* fixes pep8 issue and syntax error
* ansibot tole me to do this
* Unit test
* win_psexec: Enable -nobanner option by default
PR also includes:
- Option `nobanner:` to remove this flag
- Improvements to Examples
- Improvement to Return Value
- Add types to all parameters now
- Add (limited) integration tests
* Move sysinternals into C:\Windows\Temp
* Support auto_remove in docker_container
* Fail if not docker>=2 and auto_remove=True, don't set auto_remove in host_config if not docker>=2
* Make quoting more readable in ansible errors
* allow elb scheme to be updated by restarting the resource
use ensure_gone and require wait option
* fix pep8
* fix yaml
* requested changes
* fix fail_json
Simplified the logic, and fix the issue of having a nested list as
entry.
Also indicate that we deliberately want to retain $null values
(and i.e. do not want them to be turned into a boolean).
Previously, this module could throw the following error message:
NameError: global name 'current_roles_attrs' is not defined
The referencing key should also match the name of the column, which is
rolvaliduntil, not rol_valid_until
* WIP file_mode
* WIP
* Add file_mode + integration tests
* fix pep8
* Update doc fragments
Create mutualy_exclusive param
Fix yamllint problem in tests
* Add aliases file + main playbook for fortios
* Install pyfg before running tests
* Install pyfg before running tests in role
* Remove pre_task as it's done in roles
* Force pyFG minimal version for python3
* role_path not role_dir :(
* Change requirements
* Specify Error type when error on import
* Bug in pygf library with python 2.5 (PR is waiting https://github.com/spotify/pyfg/pull/19)
* Bad requirement format
* still bad format -_-'
* remove test/integration/fortios.py (auto generated by tests)
missing new lines at end of file
* pyFG is now fixed in 0.50
Fix adds check if app_key and api_key provided by
user is correct or not. If this combination is wrong
then fail with appropriate error message given by
Datadog server
Fixes https://github.com/ansible/ansible/issues/24325
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
CVE-2017-7481
Lookup returns wrap the result in unsafe, however when used through the
standard templar engine, this does not result in the jinja2 environment being
marked as unsafe as a whole. This means the lookup result looses the unsafe
protection and may become simple unicode strings, which can result in bad
things being re-templated.
This also adds a global lookup param and cfg options for lookups to allow
unsafe returns, so users can force the previous (insecure) behavior.
Output of `yum check-update` can contain lines with long package names and long
repository label names, which will be broken into multiple lines, which need to
be sanitized. The solution to this has been fixed and refactored in 2.3 in form
of parse_check_update(), but it still contains subtle bug, which makes such
multi-lines invisible to later logic (such packages aren't included in
parse_check_update()) output. The problem is caused by using '\1' in re.sub(),
instead of proper r'\1', which literally puts unicode symbol \1 into resulting
output.
ssh-keyscan isn't very verbose about errors. Give the user whatever
information we have available even if it isn't much. At least they will
know how we were running ssh-keyscan and why there's an error now.
Fixes#19440
Use the default repr of AnsibleVaultEncryptedUnicode.data instead
of a custom one, since jinja templating ends up using the repr()
results.
Fixes#23846, #24175
os_quota checks the current quotas for compute, network and volume
services and fails when no volume service is found in the catalog.
Since openstack test deployments without volume services are common
os_quota shouldn't fail if such service is missing.
Fixes#23085
Signed-off-by: Alberto Murillo Silva <alberto.murillo.silva@intel.com>
This allow users to write better playbooks by replacing
- shell: dnf autoremove -y
with
- dnf: autoremove=yes
Fixes#18815
Signed-off-by: Alberto Murillo Silva <alberto.murillo.silva@intel.com>
Fix adds correct warning after deleting Windows User.
Also, adds modular function to get group
Fixes https://github.com/ansible/ansible/issues/24190
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* ansible-doc -s is supposed to output a sample snippet of how you could
add the module into a playbook. These changes update the style:
* Use yaml mappings instead of key=value
* Use the module name directly instead of action: modulename
* Fixes a bug when displaying option descritpions which are yaml strings
instead of lists.
This fixes in code the bad formatting reported in #24201
Using github_issue module, user can retrive status of issue
listed on Github repository and depending upon status takes
various actions e.g., workarounds and downloading patches.
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
When unittesting, the framework creates a pipes module that is picked up
by the basic module_utils test. Switch to using shlex_quote as that is
the right thing to use for portability anyway.
* Added new common argument api_version for all Avi modules
* Updated dependency for the new modules to use avi sdk 17.1 and above
* Updated Avi 17.1.1 modules with descriptions and moddule dependencies
* Updated version_added for new options
This fix adds a module option `validate_certs' to check
self-signed certificate of LDAP server.
Fixes https://github.com/ansible/ansible/issues/24009
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
This fix makes it so that the module works as expected when
`server_hostname` is provided. It was being silently ignored
previously. I suppose this may also fix similar behavior with
`server_insecure`, but I did not check that explicitly.
* Fix netconf port validation and minor doc change
Add check to confirm if `validate_*` funcion is
callable.
Add `config_format` in `junos_facts` documentation
* Fix review comments
- Use `fail_json` for `get_all_load_balancers` unhandled exception.
- Do not mask error message on failure of `enable_zones`.
- Do not mask error message on failure of `disable_zones`.
Also added/removed blank lines to improve PEP 8 compliance.
If a bridge does not have a fail mode set, it returns nothing, i.e.
empty string.
This causes a failure when doing the want vs have compare in plays
where the fail-mode is missing, as we compare "" vs None respectively.
If a bridge does not have external_ids, ovs-vsctl returns '{}'.
This causes issues on the current want vs have comparison in cases
where the play does not define external_ids, as the comparison
is None vs '{}'.
* fix documentation and correct exception handling
* follow AWS exception guidelines
* fix parameter_group_family req; only needed when creating cache parameter group
make pep8 and remove from legacy files
* Added Composer Command global
Added a parameter to run composer commands globally. The `working_dir`
parameter is only required if `global_command` is `False`.
Fixes#24052
* Added Composer Command global
Added a parameter to run composer commands globally. The `working_dir`
parameter is only required if `global_command` is `False`.
Fixes#24052
The timeout for gathering facts needs to be settable from three places
(highest precedence to lowest):
* programmatically
* ansible.cfg (equivalent to the user specifying it explicitly when
calling setup)
* from the default value
The code was changed in b4bd6c80de to
allow programmatically and the default value to work correctly but
setting via ansible.cfg/parameter was broken.
This change should fix setting via ansible.cfg and adds unittests for
all three cases
Fixes#23753
ClearLinux has changed its pretty name in os-release file
from: 'Clear Linux Software for Intel Architecture'
to: 'Clear Linux OS for Intel Architecture'
This patch makes the SEARCH_STRING 'Clear Linux' rather than
the full name to make it compatible with the old and new name.
Signed-off-by: Alberto Murillo Silva <alberto.murillo.silva@intel.com>
template/__init__.py imported unsafe_proxy from vars which caused
vars/__init__.py to load. vars/__init__.py needed template/__init__.py
which caused issues. Loading unsafe_proxy from another location fixes
that.
Just after release of 2.0.0 (in 2.0.0.1) we had a change to the API of
callbacks without bumping the API version. We added the playbook to the
arguments passed to the callbacks.
This wasn't in the Tower callback at the time. In order to prevent
breaking that callback we added a temporary hack to inspect the
callback's API to decide if we needed to call it with arguments or not.
We scheduled the hack for removal in January 2017. Since that's now
past, removing the hack.
Change signed off by matburt on the Tower side.
Puppet modules are not always installed in the default location
(i.e, /etc/puppet/modules) so it is useful to be able to specify
an alternate location.
Fixes issue [#24078](https://github.com/ansible/ansible/issues/24078)
Resource pools are retrieved from VSphere regardless of the state of the `resource_pool` parameter. During this process, each retrieved Resource Pool is checked for the `parent` attribute, and if it exists, the currently-scoped parent object is compared against the Resource Pool's parent object. The method doing the check, however, `assert`s that the parent object is not `None`. In some cases, a Resource Pool will have the `parent` attr, but that `parent` object will be `None`, causing the `assert` to fail.
This should avoid that. :-)
* Add check_mode to get_url that does a HEAD request to make sure the URL exists, but doesn't write the real file
* Add info about new --check behavior to docs. Add tests for the new behavior. Populate res_args with the info the tests are looking for.
* Add trailing comma
* Change nonexistent test URL to http://{{httpbin_host}/DOESNOTEXIST. Fix spacing while I'm at it
* Further spacing cleanup
* State that this functionality is in Ansible 2.4+
* Split modules/network into two parts
Given the dedicated team we we have working on Ansible Networking a
clearer split is needed between Networking modules and "things that
happen to use the network"
* nmcli to net_tools
* nmcli moved
* Run `save` before exiting config mode.
* Fix unit tests for `save`
* Allow `save` to be on its own again and introspect success
* Introspecting `compare running` makes this a lot harder.
Move `save` tests to integration tests
Ok, so for openvswitch_db in particular we just return one command
but in the sake of consistency and code re-use, let's return a list
of "commands", even if it's just one.
* Document deprecation of fetch module validate_md5 and update --tags merging deprecation
Update the default of --tags merging config option to merge by default
* Update CHANGELOG.md
Minor edit
Added an integration test for fetch module idempotence. (Testing
that validate_checksum is doing what it's supposed to is harder as we'd
have to create a race condition with the downloaded data to trigger it.
Probably need to make that a unittest eventually).
Also give a deprecation message to the validate_md5 parameter so that we
can eventually get rid of it.
* atomic_image: add support for pull --storage=
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* atomic_container: new module
Manage atomic containers
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* Minor junos_config module changes
* Add note for json config support
* Add example for lines argument
* Fix future warning for ElementTree
* Remove unwanted space
We fail-fast and display 'stderr' in case 'pacman' returns with 'rc != 0'.
There is no point computing 'module._diff' in such case anyway.
Fixes#23910
(cherry picked from commit 8c6a2a848cf6a6d6522c8f5be56decf8df1ed6ab)
* Fix systemd in chroot
The 'request ignored' message is in stderr, not stdout.
* Check both stdout and stderr for systemd message
Some versions of systemd report to stderr, others to stdout. Also check
whether output could be a valid normal response to avoid false positives.
* Use sys.stdout.buffer to write vault bytes to stdout on py3
We need sys.stdout.buffer on py3 so we can write bytes to it since the plaintext
of the vaulted object could be anything/binary/etc
Before, attempting to write bytes to stdout on py3 would cause:
TypeError: write() argument must be str, not bytes
* keep unsafe .. unsafe
fixes#23734, which was broken in previous fix that allowed non string types to be templated
use new 'is_template' function vs bastardizing others
refactored clean_data to allow for arbitrary data structures to clean
fixed/removed some tests
* deal with complex data for is_template
* typos
We have a list of specific messages that we scree-scrape and flag
them as legit errors.
However, we also have a catch-all regex that matches everything
starting with %.
That can cause issues on commands that return lines with that
character, like for example the 'crypto key generate'.
Fixes#23770
In current stable (2.2), ansible galaxy install --force do erase
a role, even if the version is not set. This commit should restore
that specific behavior, in accordance to people reports:
https://github.com/ansible/ansible/issues/11266#issuecomment-273801480
It was also the behavior planned in the initial discussion:
"if you're not fixing versions in your roles file, then it's fine
to expect that the role will be reinstalled each time you run
ansible-galaxy install.", cf https://github.com/ansible/ansible/pull/12904
* Revert "fixes play context connection user (#21776)"
This reverts commit 58ee661437.
fixes#23530
* preserve original in copy
updated comment to clarify wtf is going on here
fixes#17382
alternate to #22979
deal with cases in which group/host have . in name
updated as per feedbck
only be strict about extension when doing dirs
also avoid ~ endings
without this patch, ansible-galaxy will mangle files containing
the archive parent directory name, eg 'owncloud/files/owncloud.cron'
will become 'owncloud/files/.cron'.
The previous code could affect the entire path and even filenames.
If a file path has the top level dir name as a substring, galaxy
replaces it with ''. In one example, the archive top level dir
is 'go', so 'files/go-bin.sh' becomes 'files/-bin.sh'.
Fixes#22572, #23694, #23623
* Fix vault reading from stdin (avoid realpath() on non-links)
os.path.realpath() is used to find the target of file paths that
are symlinks so vault operations happen directly on the target.
However, in addition to resolving symlinks, realpath() also returns
a full path. when reading from stdin, vault cli uses '-' as a special
file path so VaultEditor() will replace with stdin.
realpath() was expanding '-' with the CWD to something like
'/home/user/playbooks/-' causing errors like:
ERROR! [Errno 2] No such file or directory: u'/home/user/ansible/-'
Fix is to specialcase '-' to not use realpath()
Fixes#23567
* to_text decrypt output when writing to stdout
* Make warning logs consistent
Arguments outside provider with default
value should not log as warning in case
it is not mentioned in play.
* Make nxos timeout default consistent and add comments
* Make comments more verbose
update module to support more standard state=present/absent syntax
update module to use required_if, required_together, mutually_exclusive functions where possible
per ryansb review: make documentation section more clear, fix some extra quotes, remove FIXME comment
pre willthames review: force private_zone to True if vpc_id is set and fix word wrap
The commit was started before 2.3 was branched, but was only merged once
2.3 was actually branched. This leads to documentation stating this
module is new in 2.3 when it will be actually new in 2.4
Regex patterns were not being escaped properly so package names
containing characters that could be interpreted as regex symbols
were causing failures.
Fixes: #19714
* Support check mode in ec2_vpc_dhcp_options_facts
As a facts module, ec2_vpc_dhcp_options_facts supports check mode
by default
* ec2_vpc_dhcp_options_facts tidy up
Use named method imports, move imports to top of code
Use shared code to handle filters and tags
Use snake case for parameter names while retaining backward compatibility
* Code cleanup
Removed 'add' method from CustomNetworkConfig. It is identical
to the one inherited from NetworkConfig
* Removed unused CustomNetworkConfig import
* Replaced
```
def get_existing(module, args):
existing = {}
netcfg = get_config(module)
config = netcfg.get_section(parents)
```
with
```
netcfg = CustomNetworkConfig(indent=2, contents=get_config(module))
```
get_config returns a string, not an object in 2.3.
* Removed non-functioning get_object method in CustomNetworkConfig in favor of the
inherited method.
Added child_objs property so that expand_selection would work. The original
verion never worked correctly as it compared NetworkConfig obj's and str's.
* Removed ShellError method in favor or new load_config method.
* Removed ShellError method in favor or new load_config method.
fixes#20260
* nxos requires a "no" statement to change mcase group. Corrected.
Corrected changed logic.
* Corrected deleted CustomNetworkConfig import
This addresses a problem where the action plugin would ignore the
remote_addr value for the host. In this case, only the inventory values
for the hostname would be considered and populate the remote host
remote_addr value for the connection plugin.
