- support config operations for EXOS-based platforms
- add regex to detect command failure responses
- add exos action plugin for "backup" operation
- add unit tests for exos_command (currently 94% coverage of
exos_config.py)
Add exos_facts module. Known limitations at this time include:
- Interface MTU is not reported.
- Only primary interface IP is reported.
Add basic unit tests for the exos_facts module.
An EXOS CLI prompt can be prefixed with '! ' (shutting down), '* '
(running configuration does not match saved configuration), and
can include various status tokens within parentheses after these
prefixes. Update prompt regex to accept valid CLI prompts.
* Refactoring to persistence connection BGP, factory, reload, save, showrun modules
* Refactoring methods from Util to module file
* Removing BGP Utility methods
* Adding to errors that need to be ignored
* Implement initial RouterOS support
* Correct matchers for license prompts
* Documentation updates & mild refactor
* Remove one last Cisco function
* Sanity test fixes
* Move imports to the beginning
* Remove authorize property
* Handle ANSI codes
* Revert to_lines function
* CR fixes
* test(routeros): add unit tests
* Added another test (with ANSI colors and banner in fixture).
* Ignore CRLF line endings in system_package_print file
* fix: review by ganeshrn
* NXAPI ssl ciphers & protocols default values
* TLSv1, TLSv1.1, TLSv1.2 and weak cipher support
* NXOS NXAPI weak/strong cipher & TLSv 1.2, 1.1 & 1.0 support
* Version checking for strong/weak ciphers & TLS 1.2, 1.1 & 1.0 support
* Cleaned up erroneously committed changes.
* Specific NXOS platform checking for nxapi ssl ciphers & protocols
* Fixed ansibot reported errors.
* Resolved ansibot reported error.
* Added network_os_version to mocked up N7K unit test device_info
* Calling get_capabilities() once in main and passing results into methods.
* Removed raising exceptions when platform capabilities return None
per reviewers request. Skipping nxapi ssl options when capabilities
are None and generating a warning when these options are skipped
* Cleaned up explicit checks for None/not None
* CNOS Vlag module is refactored to use persistence connection instead of paramiko.
* Changing interface and port channel modules to persistent connection and adding UT for them.
* Fixing pep8 issues
* Removing trailing new line
* Removing trailing new line
* Removing trailing new line
* Correcting indentation mistake
* Update cnos_vlag.py
* Removing commented examples
They are commented because those configurations are not meant for L2 ports
* nxos cliconf plugin refactor
Fixes#39056
* Refactor nxos cliconf plugin as per new api definition
* Minor changes in ios, eos, vyos cliconf plugin
* Change nxos httpapi plugin edit_config method to be in sync with
nxos cliconf edit_config
* Fix CI failure
* Fix unit test failure and review comment
Now that we don't need to worry about python-2.4 and 2.5, we can make
some improvements to the way AnsiballZ handles modules.
* Change AnsiballZ wrapper to use import to invoke the module
We need the module to think of itself as a script because it could be
coded as:
main()
or as:
if __name__ == '__main__':
main()
Or even as:
if __name__ == '__main__':
random_function_name()
A script will invoke all of those. Prior to this change, we invoked
a second Python interpreter on the module so that it really was
a script. However, this means that we have to run python twice (once
for the AnsiballZ wrapper and once for the module). This change makes
the module think that it is a script (because __name__ in the module ==
'__main__') but it's actually being invoked by us importing the module
code.
There's three ways we've come up to do this.
* The most elegant is to use zipimporter and tell the import mechanism
that the module being loaded is __main__:
* 5959f11c9d/lib/ansible/executor/module_common.py (L175)
* zipimporter is nice because we do not have to extract the module from
the zip file and save it to the disk when we do that. The import
machinery does it all for us.
* The drawback is that modules do not have a __file__ which points
to a real file when they do this. Modules could be using __file__
to for a variety of reasons, most of those probably have
replacements (the most common one is to find a writable directory
for temporary files. AnsibleModule.tmpdir should be used instead)
We can monkeypatch __file__ in fom AnsibleModule initialization
but that's kind of gross. There's no way I can see to do this
from the wrapper.
* Next, there's imp.load_module():
* https://github.com/abadger/ansible/blob/340edf7489/lib/ansible/executor/module_common.py#L151
* imp has the nice property of allowing us to set __name__ to
__main__ without changing the name of the file itself
* We also don't have to do anything special to set __file__ for
backwards compatibility (although the reason for that is the
drawback):
* Its drawback is that it requires the file to exist on disk so we
have to explicitly extract it from the zipfile and save it to
a temporary file
* The last choice is to use exec to execute the module:
* https://github.com/abadger/ansible/blob/f47a4ccc76/lib/ansible/executor/module_common.py#L175
* The code we would have to maintain for this looks pretty clean.
In the wrapper we create a ModuleType, set __file__ on it, read
the module's contents in from the zip file and then exec it.
* Drawbacks: We still have to explicitly extract the file's contents
from the zip archive instead of letting python's import mechanism
handle it.
* Exec also has hidden performance issues and breaks certain
assumptions that modules could be making about their own code:
http://lucumr.pocoo.org/2011/2/1/exec-in-python/
Our plan is to use imp.load_module() for now, deprecate the use of
__file__ in modules, and switch to zipimport once the deprecation
period for __file__ is over (without monkeypatching a fake __file__ in
via AnsibleModule).
* Rename the name of the AnsiBallZ wrapped module
This makes it obvious that the wrapped module isn't the module file that
we distribute. It's part of trying to mitigate the fact that the module
is now named __main)).py in tracebacks.
* Shield all wrapper symbols inside of a function
With the new import code, all symbols in the wrapper become visible in
the module. To mitigate the chance of collisions, move most symbols
into a toplevel function. The only symbols left in the global namespace
are now _ANSIBALLZ_WRAPPER and _ansiballz_main.
revised porting guide entry
Integrate code coverage collection into AnsiballZ.
ci_coverage
ci_complete
* ios_user module - add sshkey support
* ios_user - Add version_added to sshkey option
* ios_user - pep8 indentation fixes in unit tests
* ios_user - use b64decode method that works on python 2 and 3
* Add support for global IGMP configuration on onyx switches
Signed-off-by: Samer Deeb <samerd@mellanox.com>
* Add support for global IGMP configuration on onyx switches
Signed-off-by: Samer Deeb <samerd@mellanox.com>
* Changing Lenovo Inc to Lenovo and update License file to be consistent.
* Changing cnos_vlan from paramiko to persistence connection of Ansible. Also talking care of CLI changes in CNOS commands with backward compatibility.
* Fixing Validation issues
* Trailing lines removal
* Review comments of Gundalow are getting addressed. He mentioned only at one place for cnos.py. But I have covered the entire file.
* Changes to incorporate Review comments from Qalthos
* Removing configure terminal command from module code
* Aligning with change in run_cnos_commands method changes
* Editing cliconf for latest CNOS CLIs
* add submode features ipv4/ipv6
* add tests for submode
* the parameters both_ * were not idempotent, in what is read in the configuration we have a list with 2 entries (import, export) while the input parameter has only one parameter which will be applied twice
* add docstring to the ios_vrf module + provide a fix for: https://github.com/ansible/ansible/issues/41581
* complete tests
* add missing description
* fix KeyError for address-family ipv*
* fix both_* tests
* fix E231, W292, W293
* fix W293
* remove set has it doesn't preserve order of routes
* fix E106
* remove ImportError: cannot import name OrderedDict
* We should be able to mix the parameters for the routes targets , while remaining imdepotent. During the first implementation we did not take this into account, which did not correspond to the reality of the needs in production (to be able to use each parameter indifemently together)
* remove epdb reference
* FIX E111, E106
* FIX E302
* using loop produce a result who was not imdepotent
* FIX E241
* fix: used pass intead of list
The OVSDB schema consists of typed columns. The 'key' parameter is
required only for columns with type of a 'map'. This patch makes 'key'
an optional parameter to allow setting values for other column types
like int.
Fixes#42108
* ios_facts: Report file system space
Parse total and free space from dir output. For this, add a hash
filesystems_info containing the keys spacetotal_kb and spacefree_kb.
* ios_facts: Add unit test for file system space reporting
* ios_facts: Add integration test for file system space reporting
* Update eos cliconf plugin methods
* Refactor eos cliconf plugin
* Changes in eos module_utils as per cliconf plugin refactor
* Fix unit test and sanity failures
* Fix review comment
* Add run_commands api for ios and vyos cliconf plugin
* Add run_commands api to ios and vyos cliconf plugin
* Refactor ios and vyos module_utils to check return code
in run_commands
* Fix Ci failures
* vyos and ios cliconf plugin refactor
* Refactor vyos cliconf plugin
* Change vyos module_utils and vyos_config as per refactor
* Minor changes in ios cliconf plugin
* Fix unit test failure
* Fix sanity issues
* Add get_diff to rpc list
* Refactor ios cliconf plugin and ios_config module
* Refactor ios cliconf plugin to support generic network_config module
* Refactor ios_config module to work with cliconf api's
* Enable command and response logging in cliconf pulgin
* cliconf api documentation
* Fix unit test and other minor changes
* Doc update
* Fix CI failure
* Add default flag related changes
* Minor changes
* redact input command logging by default
* Adding changed option to save_when for aireos
* Deprecating save option for aireos_config.
* Updating version_added to 2.7 since the PR missed the window for 2.6
* Remove 1.1.1.1 from *_config tests
* remove from *_smoke and *_system
* Miscellaneous other tests
* Remove from module documentation as well
* Remove from unit tests as well
* Remove accidental duplication from rebase
Change the command to get the interface in a vlan "show vlan" => "show vlan brief"
Change the parsing of the return command of the switch.
The return of the ios command is fixed so i cut with fix number of carracter.
Adding looking for the next line to add the forgeted interfaces.
* Modifying cnos-facts, cnos_command and cnos-config in line with the design followed in Ansible. Adding unit test cases for these modules. Added plugins to support them.
* Removing doc fragment conflicts with other modules
* Replacing show with display
* Add members to bigip_gtm_pool
* Add monitors to bigip_gtm_pool
* Add availability_requirements to bigip_gtm_pool
* Refactor bigip_gtm_pool
* Normalize the product value returned by gtm facts
* Corrected various documentation
* Updated various F5 coding conventions
* Add partition to bigip_static_route
* Added more unit tests
* Refactor bigip_gtm_virtual_server
* Add translation_address to bigip_gtm_virtual_server
* Add translation_port to bigip_gtm_virtual_server
* Add availability_requirements to bigip_gtm_virtual_server
* Add monitors to bigip_gtm_virtual_server
* Add virtual_server_dependencies to bigip_gtm_virtual_server
* Add link to bigip_gtm_virtual_server
* Add limits to bigip_gtm_virtual_server
* Add partition to bigip_gtm_virtual_server
* Fix bigip_gtm_server to correctly create other server types
* Add type to virtual_server
* Add address_translation to virtual_server
* Add port_translation to virtual_server
* Add ip_protocol to virtual_server
* Add firewall_enforced_policy to virtual_server
* Add firewall_staged_policy to virtual_server
* Add security_log_profiles to virtual_server
* Removed forwarders parameter that did not work
* Updated coding conventions
* Added ssl_cipher_suite and ssl_protocols to bigip_device_httpd
* Added more unit tests
* a refactor of pool member and node modules to be inline with current f5 conventions
* Added priority_group_activation to pools
* various other small convention fixes and bug fixes
* Adds gnat provisioning to bigip_provision
* Adds special handling for AFM in bigip_provision
* Add device rebooting for provisioning as necessary
* Refactored route domain module to be inline with current f5 conventions
* Minor refactors across modules
* Adding slxos_config module and supporing util functions.
* Adding slxos module_utils load_config test
* Adding slxos_config module tests
* Removing unneeded required false statements from slxos_config module
* Removing version_aded from slxos_config module
* Removing force and save from slxos config module
* Removing save test
* Adding slx_command module and supporting module_utils.
This commit adds the slx_command module and tests as well as the
required slxos module_utils.
* Update copyright in header
* Adding missing module init
* Cleaning up shebangs/licensing.
* Incorporating feedback
Removing reference to `waitfor` alias in `slxos_command` module.
Adding `Extreme Networks` to `short_description` of `slxos_command` module.
* Adding cliconf tests
* Fixing 3.X tests
* Adding docstrings to test methods for slxos cliconf tests
* Adding slxos terminal tests
* Adding slxos module_utils tests
* Adding Extreme Networks team members to BOTMETA.yml
NSO verify did not handle leaf-list value verification in 4.5 and
later due to changes made for configuration writing made.
map prefix for identityref types in verification.
NSO operations can take much longer than 10 seconds as they operate on
real network equipment, set default timeout to 5 minutes and allow for
user override.
* fix nxos_l3_interface tests as n35 doesn't support ipv6
* add terminal dont-ask to nxos_feature and nxos_lldp
* put interfaces in L2 mode for N35
* fix nxos_feature unit-tests
The modules in this patch include waits that need to happen to ensure
something is correctly configured on a BIG-IP. These waits were
raised as an issue in a recent ansible-testing meeting.
This patch eliminates the waits by mocking time.sleep
* Fixing eos_config save option. Was removed when deprecated. Fixing other deprecation documentation. Adding unit tests.
* Fixing removed_in_version for force.
* Fix over-byte
* Update ios tests to call `provider`
To continue to support testing `connection: local`
* Fix command dict handling in ios_user
* Clean up unit tests, too
* Revert model and serialnum to older version
* Add stacked versions of model and serialnum as separate facts
* Add unit test to check stacked output
* Alter model regex to address #34768
* Adding new code for new module and new module_utils with the pip pyfmg package
* Changed login and logout functionality and renamed mod_utils file as well as cleaned up PEP8 syntax
* Removing extra Ansible parameters and fixing more syntax issues
* Fixing more syntax issues and comparing against previous FTNT script module
* Changing import location to pass syntax checks
* Fixing pylint errors
* Removing test files
* Add unit tests and enabling a login session check within main in order to throw error if network connection exception
* Fixing syntax issues for adding unit tests
* Changing case for pip package requirements
* adding comments
* adding version restriction on pip package for testing
* adding version restriction on pip package for testing
* More comments
* Fixing documentation errors and add the ability to skip a test if it isn't present
* Fixing Pep8 error with whitespace (tab) in the row
There are changes that the merge config can fail, but the module
will still report success. This adds a blob of code to start
collecting those failures and bubbling up a module failure
accordingly.
This patch is primarily a refactor to make the validate-modules arg-spec
no longer generate a traceback. It additionally includes removal of deprecated
code in the virtual server module.
The main patch is to remove the traceback generating code. There are
other small fixes that were made in addition to doing that.
* Removed re-def of cleanup_tokens.
* Changed parameter args to be keywords.
* Changed imports to include new module_util locations.
* Imports also include developing (sideband) module_util locations.
* Changed to using F5Client and plain AnsibleModule to prevent tracebacks caused by missing libraries.
* Removed init and update methods from most Parameter classes (optimization) as its now included in module_utils.
* Changed module and module param references to take into account the new self.module arg.
* Minor bug fixes made during this refactor.
The main purpose of this patch is to do the refactor that
supports replacing tracebacks with fail_json. Additionally, the
following was done.
* Removed re-def of cleanup_tokens.
* Changed parameter args to be keywords.
* Changed imports to include new module_util locations.
* Imports also include developing (sideband) module_util locations.
* Changed to using F5Client and plain AnsibleModule to prevent tracebacks caused by missing libraries.
* Removed init and update methods from most Parameter classes (optimization) as its now included in module_utils.
* Changed module and module param references to take into account the new self.module arg.
* Minor bug fixes made during this refactor.
Primarily, this patch contains refactors to remove tracebacks that
are generated when libraries are missing. There is also,
* Removed re-def of cleanup_tokens.
* Changed parameter args to be keywords.
* Changed imports to include new module_util locations.
* Imports also include developing (sideband) module_util locations.
* Changed to using F5Client and plain AnsibleModule to prevent tracebacks caused by missing libraries.
* Removed init and update methods from most Parameter classes (optimization) as its now included in module_utils.
* Changed module and module param references to take into account the new self.module arg. Minor bug fixes made during this refactor.
This patch was primarily an effort to reduce traceback errors for
work that sivel was doing. Part of (and in some cases in addition to)
that, the following was done.
* Removed re-def of cleanup_tokens.
* Changed parameter args to be keywords.
* Changed imports to include new module_util locations.
* Imports also include developing (sideband) module_util locations.
* Changed to using F5Client and plain AnsibleModule to prevent tracebacks caused by missing libraries.
* Removed init and update methods from most Parameter classes (optimization) as its now included in module_utils.
* Changed module and module param references to take into account the new self.module arg.
* Minor bug fixes made during this refactor.
* Mellanox OS name change: MLNXOS changed to ONYX
Signed-off-by: Samer Deeb <samerd@mellanox.com>
* Fix alphabetical order of modules metadata
Signed-off-by: Samer Deeb <samerd@mellanox.com>
* Add new module for managing ospf protocol on mlnxos devices
Signed-off-by: Samer Deeb <samerd@mellanox.com>
* Fix test name, and documentation.
Signed-off-by: Samer Deeb <samerd@mellanox.com>
* Add new module mlnxos_protocol for enabling disabling protocols on
MLNX-OS Mellanox network devices
Signed-off-by: Samer Deeb <samerd@mellanox.com>
* Fix Test Class name
* Fix IP routing protocol support
Signed-off-by: Samer Deeb <samerd@mellanox.com>
* Add missing support for check_mode, and Fix documentation
Signed-off-by: Samer Deeb <samerd@mellanox.com>
A bug in the parsing of single commands with commas
Token cleanup
Password argument now defaults to false
Addition of coding conventions from v3 conventions
This module can be used to add license offerings to a pool. This
is the second part required to license a remote device from a
BIG-IQ (the first being to create a pool with bigiq_regkey_pool)
* Removes deprecated code from bigip_monitor_tcp
The deprecated code was moved into its own modules. We let it lay
here for a release, and now I'm removing it.
* Fixing upstreaming tests
This module can be used to create GTM servers (not to be confused with
GTM virtual servers) on a BIGIP. GTM servers are a component of the
datacenter, and GTM virtual servers are their members.
Code refactor to use f5 coding conventions. Removed deprecated
"enabled/disabled" params (this is now a state). Adds token cleanup
for cases where many api calls are made.
This refactors the bigip_virtual_server module to address several issues and
missing features. Additionally it adds tests and updates the coding standards
to the recent version used by f5. Finally, it removes deprecated items that
were announced in 2.4
* mutually_exclusive add - ios_config parents works with lines by not src
* mutually_execlusive parents,src added to all other net modules
* tests for mutually_exclusive parents,src and whitespce removal
* Add module mlnxos_linkagg for configuring LAG and MLAG on Mellanox
switches
Signed-off-by: Samer Deeb <samerd@mellanox.com>
* Remove unnecessary method in unit-test
remove _execute_module and use execute_module from base class
* update version parsing and move requirements to nso_* modules
prepare for introduction of nso_show module that has other version
requirements than the existing nso_* modules.
* Add nso_show module for retreiving config from Cisco NSO
New module that supports getting configuration and operational data
from Cisco NSO.
* Fixing aruba's inconsitent indenting.
* Adding config with different children indentation and unit test to confirm the different spacing does not matter.
* Fixing pylint check. Missed an r prefix.
* Fixing save so it still works. Adding changed as an option for save_when.
* Updating unit tests.
* Updating description to state that changed was added in 2.5.
* - Netconf plugin addition for iosxr
- Utilities refactoring to support netconf and cliconf
- iosx_banner refactoring for netconf and cliconf
- Integration testcases changes to accomodate above changes
* Fix sanity failures, shippable errors and review comments
* fix pep8 issue
* changes run_command method to send specific command args
* - Review comment fixes
- iosxr_command changes to remove ComplexDict based command_spec
* - Move namespaces removal method from utils to netconf plugin
* Minor refactoring in utils and change in deprecation message
* rewrite build_xml logic and import changes for new utils dir structure
* - Review comment changes and minor changes to documentation
* * refactor common code and docs updates
In case of workflow delete action, the returned 404 status code
considered as invalid although it's a valid code for not found (deleted)
entity.
Removed verification of the status. Only success should be verified.
Fixes#33524
* Refactor common network shared and platform specific code into package (part-1)
As per proposal #76 refactor common network shared and platform specific
code into sub-package.
https://github.com/ansible/proposals/issues/76
* ansible.module_utils.network.common - command shared functions
* ansible.module_utils.network.{{ platform }} - where platform is platform specific shared functions
* Fix review comments
* Fix review comments
* Refactors bigip_node
Includes a number of fixes and enhancements in addition to refactoring
the code to be inline with f5 standards
* Fixes upstream errors
* Adds bigip_policy_rule module
This module is the second component of managing LTM policies on
BIG-IP. This module lets you manage the rules of a policy
* Fixing upstream errors
* Correcting YAML errors
* Fixes and features for bigip_provision
Adds support for dedicated modules. Fixes bug in minimum name.
Adds wrappers around checking for up-ness so that they will contribute
to the watch loop
* Fixes upstream errors
* Adding module enos_config and its UT files
* Removing trailing line
* Removing trailing lines
* Editing enos_module.py to fix build errors
* Removing blank lines in end
* Updating enos_config.py based on review comments
* Adding one more blank line
* Removing training white space
* Removing test_enos_config_force method from UT
* Updating documentation
* Comments by John, Remove version_added: "2.5"
* Add netscaler_nitro_request module
* Make changes as requested.
* Fix whitepsace in EXAMPLES block.
* Set module changed status according to operation performed.
* Fix junos integration test fixes as per connection refactor (#33050)
Refactor netconf connection plugin to work with netconf plugin
* Fix junos integration test fixes as per connection refactor (#33050)
Refactor netconf connection plugin to work with netconf plugin
Fix CI failure
Fix unit test failure
Fix review comments
* Adding RPC attribute arguments to `junos_rpc` network module.
* Specifying module argument version.
* Fixing DOCUMENTATION block.
* First attempt at new test fixture.
* Updated RPC_CLI_MAP.
* Use `result` instead of `reply`.
This module can be used to manage guests on a vCMP provisioned BIG-IP.
vCMP is a hardware-only feature, therefore this module cannot be used
on the VE editions of BIG-IP.
* move set_module_args to units.modules.utils
* unit tests: reuse set_module_args
* unit tests: mock exit/fail_json in module.utils.ModuleTestCase
* unit tests: use module.utils.ModuleTestCase
* unit tests: fix 'import shadowed by loop variable'
* Adding git_command module and its UT file
* Changing Author Name and removing 2 blank lines
* Removing blank lines
* Adding enos_config and its UT files
* Removing config module as I am allowed to have only module per PR
* Work on Ganesh's Review comments
* John Review Comments on enos_command.py
* Review comments of John
* Add mtu option nxos_interface feature idea
Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>
* Add unit test for mtu feature
Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>
* Squashing all commits to one as suggested by John
* Adding Unit test method for the module enos_facts.py
* Pep8 and Ylint issues addressed
* Trying again to remove blank line. Some scripts are required for this.
* Bug Fixing for interfaces
* Editing for over indenting issue
* E203 whitespace before ','
* Update enos.py
Added warnings argument as to check_args method
* Update enos_facts.py
Added warnings to check_args method
This patch addresses a number of issues, large and small, that were
identified by users in the downstream repo.
* formatting of some code
* specific option combinations leading to errors
* missing includes for unit tests
* ios_logging: Fix typo in documentation
* ios_logging: Fix traceback when setting buffered destination without size
When the size parameter is not configured while configuring the buffered
destination, a traceback occurs due to the fact that validate_size expects the
parameter to be an int. Explicitely converting value to int makes the
check work for every case.
* ios_logging: Update size parameter documentation
Update the documentation of the size paramter to reflect the current behaviour
of setting a default of 4096 for the buffered dest.
* ios_logging: Add unit test
Add unit test for ios_logging testing the behaviour clarified in the previous
commits.
* ios_logging: Fix python 2.6 compliance
