* Resolve issues in NetApp E-Series Host module
The E-Series host module had some bugs relating to the update/creation
of host definitions when iSCSI initiators when included in the
configuration. This patch resolves this and other minor issues with
correctly detecting updates.
There were also several minor issues found that were causing issues with
truly idepotent updates/changes to the host definition.
This patch also provides some unit tests and integration tests to help
catch future issues in these areas.
fixes#28272
* Improve NetApp E-Series Host module testing
The NetApp E-Series Host module integration test lacked feature test
verification to verify the changes made to the storage array.
The NetApp E-Series rest api was used to verify host create, update, and
remove changes made to the NetApp E-Series storage arrays.
* issue:43021 add support for onyx version 3.6.6000
Signed-off-by: Samer Deeb <samerd@mellanox.com>
* issue:43021 add support for onyx version 3.6.6000
Signed-off-by: Samer Deeb <samerd@mellanox.com>
when using only an activation key without any channels.
As already suggested by mattclay in
https://github.com/ansible/ansible/pull/25079
and also patch unit test for rhn_register and
add test case for activationkey only
Portions of the f5-sdk were removed as well as the netaddr library
and were replaced with libraries that are part of ansible. Additionally,
deprecated code has been removed.
* Don't use copy.deepcopy in high workload areas, use deepishcopy. ci_complete
* Add tests
* Add changelog fragment
* rename to naive_deepcopy and add extra docs
* Rename to module_response_deepcopy and move to vars/clean
* Refactor yum and dnf, add feature parity
Signed-off-by: Adam Miller <admiller@redhat.com>
* remove unnecessary module_utils, move the classes into the module code
Signed-off-by: Adam Miller <admiller@redhat.com>
* remove yum -> yum4, out of scope
Signed-off-by: Adam Miller <admiller@redhat.com>
* use ABCMeta
Signed-off-by: Adam Miller <admiller@redhat.com>
* re-arrange run() caller vs callee
Signed-off-by: Adam Miller <admiller@redhat.com>
* make sanity checks happy
Signed-off-by: Adam Miller <admiller@redhat.com>
* fix yum unit tests
Signed-off-by: Adam Miller <admiller@redhat.com>
* remove unecessary debug statements, fix typo
Signed-off-by: Adam Miller <admiller@redhat.com>
* fix licensing and attribution in yumdnf module_util
Signed-off-by: Adam Miller <admiller@redhat.com>
* include fix from PR 40737
original commit 5cbda9658a
original Author: Strahinja Kustudic <kustodian@gmail.com>
yum will fail on 'No space left on device', fixes#32791 (#40737)
During the installing of packages if yum runs out of free disk space,
some post install scripts could fail (like e.g. when the kernel
package generates initramfs), but yum would still exit with a status
0. This is bad, especially for the kernel package, because it makes
it unable to boot. Because the yum module is usually used for
automation, which means the users cannot read every message yum
prints, it's better that the yum module fails if it detects that
there is no free space on the disk.
Signed-off-by: Adam Miller <admiller@redhat.com>
* Revert "fix licensing and attribution in yumdnf module_util"
This reverts commit 59e11de5a2a6efa17ac3f0076bb162348c02e1bd.
* move fetch_rpm_from_url out of yumdnf module_util
Signed-off-by: Adam Miller <admiller@redhat.com>
* fix the move of fetch_rpm_from_url
Signed-off-by: Adam Miller <admiller@redhat.com>
- support config operations for EXOS-based platforms
- add regex to detect command failure responses
- add exos action plugin for "backup" operation
- add unit tests for exos_command (currently 94% coverage of
exos_config.py)
NOTE:
1. use os.open() with os.O_CREAT|os.O_EXCL to check existence
and create a lock file if not exists, it's an atomic operation
2. the fastest process will create the lock file and others will
wait until the lock file is removed
3. after the writer finished writing to the password file, all the reading
operations use built-in open so processes can read the file parallel
* Remove use of simplejson throughout code base. Fixes#42761
* Address failing tests
* Remove simplejson from contrib and other outlying files
* Add changelog fragment for simplejson removal
Add exos_facts module. Known limitations at this time include:
- Interface MTU is not reported.
- Only primary interface IP is reported.
Add basic unit tests for the exos_facts module.
An EXOS CLI prompt can be prefixed with '! ' (shutting down), '* '
(running configuration does not match saved configuration), and
can include various status tokens within parentheses after these
prefixes. Update prompt regex to accept valid CLI prompts.
Only print warning when ansible.cfg is actually skipped
* Also add unittests for the find_ini_config_file function
* Add documentation on world writable current working directory
config files can no longer be loaded from a world writable current
working directory but the end user is allowed to specify that
explicitly. Give appropriate warnings and information on how.
Fixes#42388
* Refactoring to persistence connection BGP, factory, reload, save, showrun modules
* Refactoring methods from Util to module file
* Removing BGP Utility methods
* Adding to errors that need to be ignored
According to the do_encrypt interface, encrypt arg should be the hash method name used for encrypting returning password. But in the doc and lookup code it's a boolean flag, correct it to string.
* new nios module support
* new nios module support
* new nios module support
* new nios module support
* new nios module support
* new nios module support
* new nios module support
* new nios module integration test support
* new nios module integration test support
* new nios module integration test support
* new nios module integration test support
* new nios module integration test support
* new nios module integration test support
* new nios module integration test support
* new nios module integration test support
* new nios module integration test support
* new nios module integration test support
* new nios module integration test support
* new nios module integration test support
* new nios module integration test support
* new nios module integration test support
* new nios module integration test support
* new nios module integration test support
* new nios module integration test support
* new nios module integration test support
* new nios module integration test support
* new nios module integration test support
* new nios module integration test support
* new nios module integration test support
* new nios module integration test support
* new nios module integration test support
* test/integration/targets/nios_naptr_record/tasks/nios_naptr_record_idempotence.yml
new nios module integration test support
* fix pep8 error
* fix pep8 error
* adding newline at end
* adding newline at end
* adding newline at end
* adding newline at end
* adding newline at end
* adding newline at end
* adding newline at end
* adding newline at end
* adding newline at end
* adding newline at end
* adding newline at end
* adding newline at end
* adding newline at end
* adding newline at end
* refactored from procedural to OOP
* updated ongoing maintenance windows to PagerDuty REST API v2
* update create maintenance windows to PagerDuty REST API v2
* update absent maintenance windows to PagerDuty REST API v2
* update pager alert module to PagerDuty REST API v2
* removed basic HTTP authorization
updated parameter description and examples
* fix failed sanity checks
* revised documentation according to review
* make obsolete service key parameter an alias to a new integration key parameter
* Implement initial RouterOS support
* Correct matchers for license prompts
* Documentation updates & mild refactor
* Remove one last Cisco function
* Sanity test fixes
* Move imports to the beginning
* Remove authorize property
* Handle ANSI codes
* Revert to_lines function
* CR fixes
* test(routeros): add unit tests
* Added another test (with ANSI colors and banner in fixture).
* Ignore CRLF line endings in system_package_print file
* fix: review by ganeshrn
* NXAPI ssl ciphers & protocols default values
* TLSv1, TLSv1.1, TLSv1.2 and weak cipher support
* NXOS NXAPI weak/strong cipher & TLSv 1.2, 1.1 & 1.0 support
* Version checking for strong/weak ciphers & TLS 1.2, 1.1 & 1.0 support
* Cleaned up erroneously committed changes.
* Specific NXOS platform checking for nxapi ssl ciphers & protocols
* Fixed ansibot reported errors.
* Resolved ansibot reported error.
* Added network_os_version to mocked up N7K unit test device_info
* Calling get_capabilities() once in main and passing results into methods.
* Removed raising exceptions when platform capabilities return None
per reviewers request. Skipping nxapi ssl options when capabilities
are None and generating a warning when these options are skipped
* Cleaned up explicit checks for None/not None
* CNOS Vlag module is refactored to use persistence connection instead of paramiko.
* Changing interface and port channel modules to persistent connection and adding UT for them.
* Fixing pep8 issues
* Removing trailing new line
* Removing trailing new line
* Removing trailing new line
* Correcting indentation mistake
* Update cnos_vlag.py
* Removing commented examples
They are commented because those configurations are not meant for L2 ports
* nxos cliconf plugin refactor
Fixes#39056
* Refactor nxos cliconf plugin as per new api definition
* Minor changes in ios, eos, vyos cliconf plugin
* Change nxos httpapi plugin edit_config method to be in sync with
nxos cliconf edit_config
* Fix CI failure
* Fix unit test failure and review comment
Now that we don't need to worry about python-2.4 and 2.5, we can make
some improvements to the way AnsiballZ handles modules.
* Change AnsiballZ wrapper to use import to invoke the module
We need the module to think of itself as a script because it could be
coded as:
main()
or as:
if __name__ == '__main__':
main()
Or even as:
if __name__ == '__main__':
random_function_name()
A script will invoke all of those. Prior to this change, we invoked
a second Python interpreter on the module so that it really was
a script. However, this means that we have to run python twice (once
for the AnsiballZ wrapper and once for the module). This change makes
the module think that it is a script (because __name__ in the module ==
'__main__') but it's actually being invoked by us importing the module
code.
There's three ways we've come up to do this.
* The most elegant is to use zipimporter and tell the import mechanism
that the module being loaded is __main__:
* 5959f11c9d/lib/ansible/executor/module_common.py (L175)
* zipimporter is nice because we do not have to extract the module from
the zip file and save it to the disk when we do that. The import
machinery does it all for us.
* The drawback is that modules do not have a __file__ which points
to a real file when they do this. Modules could be using __file__
to for a variety of reasons, most of those probably have
replacements (the most common one is to find a writable directory
for temporary files. AnsibleModule.tmpdir should be used instead)
We can monkeypatch __file__ in fom AnsibleModule initialization
but that's kind of gross. There's no way I can see to do this
from the wrapper.
* Next, there's imp.load_module():
* https://github.com/abadger/ansible/blob/340edf7489/lib/ansible/executor/module_common.py#L151
* imp has the nice property of allowing us to set __name__ to
__main__ without changing the name of the file itself
* We also don't have to do anything special to set __file__ for
backwards compatibility (although the reason for that is the
drawback):
* Its drawback is that it requires the file to exist on disk so we
have to explicitly extract it from the zipfile and save it to
a temporary file
* The last choice is to use exec to execute the module:
* https://github.com/abadger/ansible/blob/f47a4ccc76/lib/ansible/executor/module_common.py#L175
* The code we would have to maintain for this looks pretty clean.
In the wrapper we create a ModuleType, set __file__ on it, read
the module's contents in from the zip file and then exec it.
* Drawbacks: We still have to explicitly extract the file's contents
from the zip archive instead of letting python's import mechanism
handle it.
* Exec also has hidden performance issues and breaks certain
assumptions that modules could be making about their own code:
http://lucumr.pocoo.org/2011/2/1/exec-in-python/
Our plan is to use imp.load_module() for now, deprecate the use of
__file__ in modules, and switch to zipimport once the deprecation
period for __file__ is over (without monkeypatching a fake __file__ in
via AnsibleModule).
* Rename the name of the AnsiBallZ wrapped module
This makes it obvious that the wrapped module isn't the module file that
we distribute. It's part of trying to mitigate the fact that the module
is now named __main)).py in tracebacks.
* Shield all wrapper symbols inside of a function
With the new import code, all symbols in the wrapper become visible in
the module. To mitigate the chance of collisions, move most symbols
into a toplevel function. The only symbols left in the global namespace
are now _ANSIBALLZ_WRAPPER and _ansiballz_main.
revised porting guide entry
Integrate code coverage collection into AnsiballZ.
ci_coverage
ci_complete
d7df072b96 changed how we call
journal.send() from positional arguments to keyword arguments. So we
need to update the test to check for the arguments it was called with in
the keyword args, not in the positional args.
* Properly handle default package manager vs apt
For distros where apt might be installed but is not the default
package manager for the distro, properly identify the default distro
package manager during fact finding and re-use fact finding from
DistributionFactCollector and instead of reimplementing small
portions of it in PkgMgrFactCollector
Add unit test to always check the apt + Fedora combination to test
the new code.
Fixes#34014
Signed-off-by: Adam Miller <admiller@redhat.com>
* remove q debugging output I accidentally left behind
Signed-off-by: Adam Miller <admiller@redhat.com>
* add os_family to the conditional so we're only hitting that code path when needed
Signed-off-by: Adam Miller <admiller@redhat.com>
* setup for a _check* pattern for general os_family group pkg_mgr checking
Signed-off-by: Adam Miller <admiller@redhat.com>
* use Mock.patch decorator for os.path.exists in TestPkgMgrFactsAptFedora
Signed-off-by: Adam Miller <admiller@redhat.com>
* ios_user module - add sshkey support
* ios_user - Add version_added to sshkey option
* ios_user - pep8 indentation fixes in unit tests
* ios_user - use b64decode method that works on python 2 and 3
* Add support for global IGMP configuration on onyx switches
Signed-off-by: Samer Deeb <samerd@mellanox.com>
* Add support for global IGMP configuration on onyx switches
Signed-off-by: Samer Deeb <samerd@mellanox.com>
* Changing Lenovo Inc to Lenovo and update License file to be consistent.
* Changing cnos_vlan from paramiko to persistence connection of Ansible. Also talking care of CLI changes in CNOS commands with backward compatibility.
* Fixing Validation issues
* Trailing lines removal
* Review comments of Gundalow are getting addressed. He mentioned only at one place for cnos.py. But I have covered the entire file.
* Changes to incorporate Review comments from Qalthos
* Removing configure terminal command from module code
* Aligning with change in run_cnos_commands method changes
* Editing cliconf for latest CNOS CLIs
now can use `ansible-test units module_name` for the aws_s3 and aws_api_gateway modules
changes to modules/cloud/amazon/aws_api_gateway and modules/cloud/amazon/aws_s3 are not triggering the unit tests; also fix aws_s3 from importing non-exist module and skipping tests
changes to module_utils/aws/core.py are only being unit tested on modules that import from the file (if they have a corresponding test) or tests that import from the file themselves.
* add submode features ipv4/ipv6
* add tests for submode
* the parameters both_ * were not idempotent, in what is read in the configuration we have a list with 2 entries (import, export) while the input parameter has only one parameter which will be applied twice
* add docstring to the ios_vrf module + provide a fix for: https://github.com/ansible/ansible/issues/41581
* complete tests
* add missing description
* fix KeyError for address-family ipv*
* fix both_* tests
* fix E231, W292, W293
* fix W293
* remove set has it doesn't preserve order of routes
* fix E106
* remove ImportError: cannot import name OrderedDict
* We should be able to mix the parameters for the routes targets , while remaining imdepotent. During the first implementation we did not take this into account, which did not correspond to the reality of the needs in production (to be able to use each parameter indifemently together)
* remove epdb reference
* FIX E111, E106
* FIX E302
* using loop produce a result who was not imdepotent
* FIX E241
* fix: used pass intead of list
* Add the NIOS RECORD PTR Module
* FIX E241,E231, E105
* FIX module should not be executable
* FIX module RWX
* Remove change in nios_srv_record
* Remove change in nios_srv_record
* FIX test_nios_ptr_record_update_comment
* ADD: Integration and target tests for the NIOS PTR RECORD module.
* FIX module name in integrations tests
* Update integration
* Refactor nios_ptr_record module
* Refactor the nios_ptr_record_idempotence
* FIX name
* Smoketests for the NIOS modules does not take care of the PTR:RECORD object
* REM the default for view
* Add finals test, after adding the PR (https://github.com/ansible/nios-test-container/pull/1) in order to handle PTR:RECORD
* add the define nios specific constant for PTR:RECORD
* fix: documentation style
* add create an ipv6 ptr record
* rename class name, add ipv6 unittest
Move dict_merge from azure_rm_resource module to
module_utils.common.dict_transformations and add tests.
Use dict_merge to provide a fairly realistic, reliable
diff output when k8s-based modules are run in check_mode.
Rename unit tests so that they actually run and reflect
the module_utils they're based on.
* win_reboot: fix 2.6 issues and better handle post reboot reboot
* changed winrm _reset to reset
* Add handler to reset calls when .reset() throws an AnsibleError on older hosts
* Moving back to _reset to get the issue fixed
The OVSDB schema consists of typed columns. The 'key' parameter is
required only for columns with type of a 'map'. This patch makes 'key'
an optional parameter to allow setting values for other column types
like int.
Fixes#42108
* ios_facts: Report file system space
Parse total and free space from dir output. For this, add a hash
filesystems_info containing the keys spacetotal_kb and spacefree_kb.
* ios_facts: Add unit test for file system space reporting
* ios_facts: Add integration test for file system space reporting
* Fix tmpdir on non root become
- also avoid exception if tmpdir and remote_tmp are None
- give 'None' on deescalation so tempfile will fallback to it's default behaviour
and use system dirs
- fix issue with bad tempdir (not existing/not createable/not writeable)
i.e nobody and ~/.ansible/tmp
- added tests for blockfile case
* Revert "Temporarily revert c119d54"
This reverts commit 5c614a59a6.
* changes based on PR feedback and changelog fragment
* changes based on the review
* Fix tmpdir when makedirs failed so we just use the system tmp
* Let missing remote_tmp fail
If remote_tmp is missing then there's something more basic wrong in the
communication from the controller to the module-side. It's better to
be alerted in this case than to silently ignore it.
jborean and I have independently checked what happens if the user sets
ansible_remote_tmp to empty string and !!null and both cases work fine.
(null is turned into a default value controller-side. empty string
triggers the warning because it is probably not a directory that the
become user is able to use).
* Update eos cliconf plugin methods
* Refactor eos cliconf plugin
* Changes in eos module_utils as per cliconf plugin refactor
* Fix unit test and sanity failures
* Fix review comment
* Create base class for network-style connections
* clean up some differences
* Move NetworkConnectionBase
* Tweak netconf for tests
* Tweak when network_os is checked to avoid failing tests
* Pull back exec_command
* Add run_commands api for ios and vyos cliconf plugin
* Add run_commands api to ios and vyos cliconf plugin
* Refactor ios and vyos module_utils to check return code
in run_commands
* Fix Ci failures
Currently TestCreateJavaKeystore::test_create_jks_success is failing on
a machine with SELinux because set_context_if_different is not mocked
and hence tries to access a file that doesn't exist because it has been
mocked previously.
Also, changing path to a path that won't exist for sure.
* Issue #39860: Add 'not_contains' method to parsing.py
* Issue #30860 Adds self.negate to Conditional class in lib/ansible/module_utils/network/common/parsing.py
* Issue #39860 Fix singleton-comparison issue per sanity tests
* Issue #39860 'test/integration/targets/nxos_command/tests/cli/not_comparison_operator.yaml' integration test
* Issue #39860 Add unit tests to '../../test/units/module_utils/network/common/test_parsing.py'
* Issue #39860 Fix singleton comparison issue
* Fix E302 expected 2 blank lines, found 1
* Issue #39860 Add license header to unit tests
* Issue #39860 Move integration test to 'test/integration/targets/nxos_command/tests/common/'; remove unnecessary comment from unit test
* Issue #39860 remove unnecessary comment from unit test
* Add a module parameter to configure the max fetched AWS CFN stack events
* Add version documentation for new configuration option
* Increase default in order to make sure that enough are fetched by default. This align roughly with the limit of manageable resources in CloudFormation.
* vyos and ios cliconf plugin refactor
* Refactor vyos cliconf plugin
* Change vyos module_utils and vyos_config as per refactor
* Minor changes in ios cliconf plugin
* Fix unit test failure
* Fix sanity issues
* Add get_diff to rpc list
* fix minor issues with debug and item labels
- no more `item=None`, we always have a label now
- debug should only show expected information, either msg= or the var in var=
- also fixed method name, deprecated misleading _get_item
When parsing the distribution files such as /etc/os-release, we extract
the full distribution version but not the major version. As such, the
ansible_distribution_major_version ends up being 'NA' whereas the
ansible_distribution_version contains the full version.
Before this patch we get this on openSUSE Leap 15
ansible -o localhost -m setup -a filter=ansible_distribution_major_version
localhost | SUCCESS => {"ansible_facts": {"ansible_distribution_major_version": "NA"}, "changed": false}
After this patch we get this
ansible -o localhost -m setup -a filter=ansible_distribution_major_version
localhost | SUCCESS => {"ansible_facts": {"ansible_distribution_major_version": "15"}, "changed": false}
This also fixes the Tumbleweed distribution test to report a proper
major version and also adds a test for openSUSE Leap 15.0 to avoid
potential future regressions.
Fixes: #41410
* Refactor ios cliconf plugin and ios_config module
* Refactor ios cliconf plugin to support generic network_config module
* Refactor ios_config module to work with cliconf api's
* Enable command and response logging in cliconf pulgin
* cliconf api documentation
* Fix unit test and other minor changes
* Doc update
* Fix CI failure
* Add default flag related changes
* Minor changes
* redact input command logging by default
* Adds requests.Session like class
* py2 syntax fix
* Add a few examples to the Request docstrings
* Add helper methods and docs
* Fix test failures
* Switch tests to test Request instead of open_url, add simple open_url test to validate funcitonality
* Fix filename in replace-urlopen code smell test
* Adding changed option to save_when for aireos
* Deprecating save option for aireos_config.
* Updating version_added to 2.7 since the PR missed the window for 2.6
* To fix following github issues 35774, 36574 and 39494
* To fix following github issues 35774, 36574 and 39494
* To fix following github issues 35774, 36574 and 39494
* To fix following github issues 35774, 36574 and 39494
* To fix following github issues 35774, 36574 and 39494
* To fix following github issues 35774, 36574 and 39494
* removed old_name new entry to make ui cleaner
* removed old_name new entry to make ui cleaner
* removed old_name new entry to make ui cleaner
* removed old_name new entry to make ui cleaner
* removed old_name new entry to make ui cleaner
* removed old_name new entry to make ui cleaner
* to resolve the bug 40709
* reslove shippable error
* reslove shippable error
* reslove shippable error
* reslove shippable error
* reslove shippable error
* reslove shippable error
* reslove shippable error
* reslove shippable error
* reslove shippable error
* to fix shippable nios automation error
* modified the name input parsing method
* modified the name input parsing method
* modified the name input parsing method
* modified the name input parsing method
* modified the name input parsing method
* modified the name input parsing method
* modified the name input parsing method
* modified the name input parsing method
* modified the name input parsing method
* shippable error fix
* shippable error fix
* shippable error fix
* shippable error fix
* shippable error fix
* review comment fix
* shippable error fix
* shippable error fix
* All instances of local connection should use _remote_is_local=True. Fixes#40551
* Switch to instance attribute for synchronize
* Add test that shows that synchronize _remote_is_local addresses tmpdir building
* Remove 1.1.1.1 from *_config tests
* remove from *_smoke and *_system
* Miscellaneous other tests
* Remove from module documentation as well
* Remove from unit tests as well
* Remove accidental duplication from rebase
* Add a module to create a java key store (jks) from a certificate
* Create a jks from a certificate and a private key (secured by a password)
* Add an option to recreate the jks (useful when you want to update the jks password)
* If the certificate changed, recreate the jks
* Version added is now 2.7
When running the test test/units/module_utils/urls/test_open_url.py
test_open_url_no_validate_certs, the test fails because of the SSLv2
check.
Test is run on a machine using openssl 1.1.0g. By reading the openssl
man page[1], one can see that support for SSLv2 has been removed.
> Support for SSLv2 and the corresponding SSLv2_method(),
> SSLv2_server_method() and SSLv2_client_method() functions where removed
> in OpenSSL 1.1.0.
>
> SSLv23_method(), SSLv23_server_method() and SSLv23_client_method() were
> deprecated and the preferred TLS_method(), TLS_server_method() and
> TLS_client_method() functions were introduced in OpenSSL 1.1.0.
Hence this commit remove the uses of this flag when it is not defined.
[1] https://www.openssl.org/docs/man1.1.0/ssl/SSLv23_method.html
* Fix errors decrypted non-ascii vault vars
AnsibleVaultEncryptedUnicode was just using b"".decode()
instead of to_text() on the bytestrings returned from
vault.decrypt() and could cause errors on python2
if non-ascii since decode() defaults to ascii.
Use to_text() to default to decoding utf-8.
add intg and unit tests for value of vaulted vars
being non-ascii utf8
based on https://github.com/ansible/ansible/issues/37258Fixes#37258
* yamllint fixups
* Fix setting the cache when refresh_cache or --flush-cache are used
* Use jsonify function that handles datetime objects in jsonfile cache plugin
* Don't access self._options directly
* Add initial integration tests for aws_ec2 inventory plugin
* Add CI alias
* Fix and add a few more unit tests
* Add integration tests for constructed
* Fix typo
* Use inventory config templates
* Collect all instances that are not terminated by default
* Create separate playbook for setting up the VPC, subnet, security group, and finding an image for the host
Create a separate playbook for removing the resources
* Allow easier grouping by region and add an example
* use a unified json encode/decode that can handle unsafe and vault
* Refactor ec2_group
Replace nested for loops with list comprehensions
Purge rules before adding new ones in case sg has maximum permitted rules
* Add check mode tests for ec2_group
* add tests
* Remove dead code
* Fix integration test assertions for old boto versions
* Add waiter for security group that is autocreated
* Add support for in-account group rules
* Add common util to get AWS account ID
Fixes#31383
* Fix protocol number and add separate tests for egress rule handling
* Return egress rule treatment to be backwards compatible
* Remove functions that were obsoleted by `Rule` namedtuple
* IP tests
* Move description updates to a function
* Fix string formatting missing index
* Add tests for auto-creation of the same group in quick succession
* Resolve use of brand-new group in a rule without a description
* Clean up duplicated get-security-group function
* Add reverse cleanup in case of dependency issues
* Add crossaccount ELB group support
* Deal with non-STS calls to account API
* Add filtering of owner IDs that match the current account
* winrm: add better exception handling for krb5 auth with pexpect
* Added changelog fragment
* Added exception handler in case kinit path isn't valid, added test cases
* fixed for Python 2 compatibility
* win_updates: add scheduled tasks back in for older hosts
* Fixed up typo in category name error message
* Fixed up some minor issues after merge
* added changelog fragment
* Default to become but add override to use scheduled tasks
* Added basic unit tests for win_updates
* fix minor typos
* parted module not idempotent for esp flag and name
Fixes#40452
Currently the parted module doesn't take into account names with
spaces in them which leads to non-idempotent transactions on the
state of the system because the name comparison will never succeed.
Also, when the esp flag is set, parted infers the boot flag and the
parted module did not previously account for this. This lead to
non-idempotent transactions as well.
Signed-off-by: Adam Miller <admiller@redhat.com>
* fix unit tests, expected command changed in the patch
Signed-off-by: Adam Miller <admiller@redhat.com>
Change the command to get the interface in a vlan "show vlan" => "show vlan brief"
Change the parsing of the return command of the switch.
The return of the ios command is fixed so i cut with fix number of carracter.
Adding looking for the next line to add the forgeted interfaces.
* Add the ability to specify an install_dir to the gem module
* Add GEM_HOME when installing a non-global gem
* Add tests for custom gem path
* Fix sanity tests
* Add changelog entry
* Rebase and add tests for incorrect options
Co-authored by: Antoine Catton <devel@antoine.catton.fr>
* add pytest_cache to gitignore
* onepassword lookup plugin
* fix linter/style test complaints
* second pass at making pycodestyle happy
* use json module instead of jq
* update copyrights, license & version added
* fix python2 compatibility
* doh. fix spacing issue.
* use standard ansible exception
* remove potentially problematic stdin argument
* actually call assertion method
* add support for top-level fields
* make vault uuids pedantically consistent in fixture
* fix new style issues
* ability specify section & correct case handling
* improve error handling
* add onepassword_raw plugin
* Add maintainer info
* Move common code to module_utils/onepassword.py
* Load raw data JSON data for easier use in Ansible
* Put OnePass class back inside lookup plugin
There is no good place for sharing code across lookups currently.
* Remove debugging code in unit tests
* Patche proper module in raw unit tests
* Add changelog entry
Co-authored-by: Scott Buchanan <sbuchanan@ri.pn>
* Do not join flag parameters
This put a comma between every character of the tcp flag parameters, resulting in a bad iptables command.
Fixes#36490
* Use suboptions to ensure tcp_flags options are lists
* Add unit tests for tcp_flags
* Add example of how to use tcp_flags
* Added gitlab_hooks module and related tests
* Fix sanity check issues
* Refactor to use common util method, add check_mode support
* Fix module shebang
* Added module gitlab_deploy_key and related tests
* Fix sanity check issues
* Refactor to use common util method, add check_mode support
* Fix module shebang
* Modifying cnos-facts, cnos_command and cnos-config in line with the design followed in Ansible. Adding unit test cases for these modules. Added plugins to support them.
* Removing doc fragment conflicts with other modules
* Replacing show with display
Fixes several bugs exposed in #34893
* Fixes relative path handling in copy so that it splits directories and
reconstructs the correct file path
* Return failed in the proper circumstances
* WIP Pull persistent connection parameters via get_option
* Fix pep8
* Add use_persistent_connection setting to paramiko_ssh plugin
* Add vars section to persistent_command_timeout setting and prevail provider values over config manager
* Use persistent_command_timeout on network_cli instead of timeout
* Fix unit tests
If we don't call loader to get network_cli, then _load_name is never
set and we get KeyError.
* Pull persistent_command_timeout via config manager for ios connection local
* Pull persistent_command_timeout via config manager on connection local
* create module tmpdir based on remote_tmp
* Source remote_tmp from controller if possible
* Fixed sanity test and not use lambda
* Added expansion of env vars to the remote tmp
* Fixed sanity issues
* Added note around shell remote_tmp option
* Changed fallback tmp dir to ~/.ansible/tmp to make shell defaults
* Add members to bigip_gtm_pool
* Add monitors to bigip_gtm_pool
* Add availability_requirements to bigip_gtm_pool
* Refactor bigip_gtm_pool
* Normalize the product value returned by gtm facts
* Corrected various documentation
* Updated various F5 coding conventions
* Add partition to bigip_static_route
* Added more unit tests
* Refactor bigip_gtm_virtual_server
* Add translation_address to bigip_gtm_virtual_server
* Add translation_port to bigip_gtm_virtual_server
* Add availability_requirements to bigip_gtm_virtual_server
* Add monitors to bigip_gtm_virtual_server
* Add virtual_server_dependencies to bigip_gtm_virtual_server
* Add link to bigip_gtm_virtual_server
* Add limits to bigip_gtm_virtual_server
* Add partition to bigip_gtm_virtual_server
* Fix bigip_gtm_server to correctly create other server types
* Add type to virtual_server
* Add address_translation to virtual_server
* Add port_translation to virtual_server
* Add ip_protocol to virtual_server
* Add firewall_enforced_policy to virtual_server
* Add firewall_staged_policy to virtual_server
* Add security_log_profiles to virtual_server
* Removed forwarders parameter that did not work
* Updated coding conventions
* Added ssl_cipher_suite and ssl_protocols to bigip_device_httpd
* Added more unit tests
* fix become_method 'doas' support by properly specifying becomecmd
a repatch of https://github.com/ansible/ansible/pull/13451/ which was never committed to 'devel' branch.
* fix play_context test for become_method doas to match new becomecmd
* Allow subspec defaults to be processed when the parent argument is not supplied
* Allow this to be configurable via apply_defaults on the parent
* Document attributes of arguments in argument_spec
* Switch manageiq_connection to use apply_defaults
* add choices to api_version in argument_spec
* Stabilize ec2_vpc_vgw and ec2_vpc_vpn so tests for ec2_vpc_vpn_facts in PR 35983 can be run in CI
* Add updated placebo recordings
* ensure find_vgw uses the virtual gateway id if available
Add AWSRetry.jittered_backoff to attach_vpn_gateway to deal with errors when attaching a new VPC directly after detaching
Add integrations tests for ec2_vpc_vgw
* Sort VPN Gateways by ID
* a refactor of pool member and node modules to be inline with current f5 conventions
* Added priority_group_activation to pools
* various other small convention fixes and bug fixes
* Adds gnat provisioning to bigip_provision
* Adds special handling for AFM in bigip_provision
* Add device rebooting for provisioning as necessary
* Refactored route domain module to be inline with current f5 conventions
* Minor refactors across modules
* Adding slxos_config module and supporing util functions.
* Adding slxos module_utils load_config test
* Adding slxos_config module tests
* Removing unneeded required false statements from slxos_config module
* Removing version_aded from slxos_config module
* Removing force and save from slxos config module
* Removing save test
* Adding slx_command module and supporting module_utils.
This commit adds the slx_command module and tests as well as the
required slxos module_utils.
* Update copyright in header
* Adding missing module init
* Cleaning up shebangs/licensing.
* Incorporating feedback
Removing reference to `waitfor` alias in `slxos_command` module.
Adding `Extreme Networks` to `short_description` of `slxos_command` module.
* Adding cliconf tests
* Fixing 3.X tests
* Adding docstrings to test methods for slxos cliconf tests
* Adding slxos terminal tests
* Adding slxos module_utils tests
* Adding Extreme Networks team members to BOTMETA.yml
* fix inventory plugin source caching
- avoid caching invetnory sources in loader in base
- same fix for yaml plugin
- idem for 'auto' plugin
fixes#37162
* fix mock dataloader func sig
This commit moves code to look for vars files/dirs to a common place and
uses it for loading role defaults/vars. This allows things such as
'defaults/main' or 'vars/main' being a directory in a role, allowing
splitting of defaults/vars into multiple files. This commit also fixes
the role loading unit tests for py3 when bytestrings are used for paths
instead of utf8 strings.
This fixes#14248 and #11639.
* Handle duplicate headers, and make it easier for users to use cookies, by providing a pre-built string
* Ensure proper cookie ordering, make key plural
* Add note about cookie sort order
* Add tests for duplicate headers and cookies_string
* Extend tests, normalize headers between py2 and py3
* Add some notes in test code
* Don't use AttributeError, use six.PY3. Use better names.
* Start of tests for ansible.module_utils.urls
* Start adding file for generic functions throughout urls
* Add tests for maybe_add_ssl_handler
* Remove commented out line
* Improve coverage of maybe_add_ssl_handler, test basic_auth_header
* Start tests for open_url
* pep8 and ignore urlopen in test_url_open.py tests
* Extend auth tests, add test for validate_certs=False
* Finish tests for open_url
* Add tests for fetch_url
* Add fetch_url tests to replace-urlopen ignore
* dummy instead of _
* Add BadStatusLine test
* Reorganize/rename tests
* Add tests for RedirectHandlerFactory
* Add POST test to confirm behavior is to convert to GET
* Update tests to handle recent changes to RedirectHandlerFactory
* Special test, just to confirm that aliasing http_error_308 to http_error_307 does not cause issues with urllib2 type redirects
This offers an optimization that allows loading larger
inventories of various structure by improving the
scaling laws involved for adding hosts and groups.
The primary speed benefit is the elimination of duplicate
recusion from traversing converging paths.
* module_common: set required parameter templar
Fix the following error (related to b455901):
$ ./hacking/test-module -m ./lib/ansible/modules/system/ping.py -I ansible_python_interpreter=/usr/bin/python
Traceback (most recent call last):
File "./hacking/test-module", line 268, in <module>
main()
File "./hacking/test-module", line 249, in main
(modfile, modname, module_style) = boilerplate_module(options.module_path, options.module_args, interpreters, options.check, options.filename)
File "./hacking/test-module", line 152, in boilerplate_module
task_vars=task_vars
File "ansible/lib/ansible/executor/module_common.py", line 910, in modify_module
environment=environment)
File "ansible/lib/ansible/executor/module_common.py", line 736, in _find_module_utils
shebang, interpreter = _get_shebang(u'/usr/bin/python', task_vars, templar)
File "ansible/lib/ansible/executor/module_common.py", line 452, in _get_shebang
interpreter = templar.template(task_vars[interpreter_config].strip())
AttributeError: 'NoneType' object has no attribute 'template'
* module_common.modify_module: templar is required
The generated file was completely unusable by the system
therefore the fix which ensures that diffing the file
prior to changes and after only shows diffs
Furthermore the code did not work for Python 3.6
> f.writelines(to_bytes(lines, errors='surrogate_or_strict'))
E TypeError: a bytes-like object is required, not 'int'
The other modifications (lambda variable renaming) is to
comply with default flake8 rules
* Fix 'New Vault password' on vault 'edit'
ffe0ddea96 introduce a
change on 'ansible-vault edit' that tried to check
for --encrypt-vault-id in that mode. But '--encrypt-vault-id'
is not intended for 'edit' since the 'edit' should always
reuse the vault secret that was used to decrypt the text.
Change cli to not check for --encrypt-vault-id on 'edit'.
VaultLib.decrypt_and_get_vault_id() was change to return
the vault secret used to decrypt (in addition to vault_id
and the plaintext).
VaultEditor.edit_file() will now use 'vault_secret_used'
as returned from decrypt_and_get_vault_id() so that
an edited file always gets reencrypted with the same
secret, regardless of any vault id configuration or
cli options.
Fixes#35834
NSO verify did not handle leaf-list value verification in 4.5 and
later due to changes made for configuration writing made.
map prefix for identityref types in verification.
NSO operations can take much longer than 10 seconds as they operate on
real network equipment, set default timeout to 5 minutes and allow for
user override.
* Fix redundant yaml error blurbs on ModArgs parse errors
Some of the AnsibleParserErrors from parsing.mod_args
are created with the obj=some_yaml_ds options but
some are not.
If they were, we don't want to add another yaml_ds to
it, because that will result in double yaml error blurbs.
And since we dont need to add info, we can just re raise it.
But if there is no ._obj, add it here so we get the extra
detail in the error message (see issue #14790) and raise
a new AnsibleParserError instance.
Fixes#36848
* cleanup existing test_tasks pep8/sanity issues
False assumption that values can not have cyclic dependencies. Fix by
removing dependency on self and look for cycles, if found remove
dependency to get a partial sort done.
Fix issues in ValueBuilder used in nso_config and nso_verify so that it
can handle leaf-list in NSO 4.5 and detect identityref types from
unions.
Fail gracefully if a type is not found.
* allows ib_spec attrs to be filtered in update
This change will allow the ib_spec entries to be be filtered on a change
object by setting the update keyword to false. The default value for
update is true. When the update keyword is set to false, the keyed
entry will be removed from the update object before it is sent to the
api endpoint.
fixes#36563
* fix up pep8 issues
* fix nxos_l3_interface tests as n35 doesn't support ipv6
* add terminal dont-ask to nxos_feature and nxos_lldp
* put interfaces in L2 mode for N35
* fix nxos_feature unit-tests
The modules in this patch include waits that need to happen to ensure
something is correctly configured on a BIG-IP. These waits were
raised as an issue in a recent ansible-testing meeting.
This patch eliminates the waits by mocking time.sleep
Start using this to construct shade OpenStack Cloud objects in a
consistent manner. This will let us centralize things like dealing with
password arguments and whatnot. It also allows us to introduce the
ability to pass a fully formed config dict directly to the module.
Migrate all OpenStack modules to use openstack_cloud_from_module.
Have it return the shade library since it's responsible for
importing shade and shade is needed for the exceptions.
Only pull specific OpenStack arguments for the constructor
Rather than passing **module.params to the shade constructor, pull out
only the values that make sense. This should prevent the issues with
module parameters stepping on shade parameters.
Replace module.params.pop with module.params.get
We don't need to pop these anymore since the shade constructor is now
using opt-in values.
Using real urls is ungood. Use example.com domains. Also, get rid of the
antiquated port numbers.
* basic: allow one or more when param list having choices
* add unit tests
* optimize a bit
* re-add get_exception import
* a number of existing modules expect to be able to get it from basic.py
* Fixing eos_config save option. Was removed when deprecated. Fixing other deprecation documentation. Adding unit tests.
* Fixing removed_in_version for force.
* aws ssm parameter lookup test case - fails demonstrating no exception when parameter missing
* aws ssm parameter lookup - fail in case parameter doesn't exist
* aws ssm parameter lookup test case - failing case for nice return from path lookup
* aws ssm parameter lookup - convert incoming taglist to a key-value dictionary
* aws ssm parameter lookup - pep8 / style clean up
* aws_ssm lookup plugin rewrite for more standard interface
* aws_ssm module and lookup - introduce integration test and fix:
* aws_ssm module and lookup - error case integraton test and many PEP8 and other cleanups
* aws ssm parameter lookup - Various fixes in response to review + recursive fix & test
* aws ssm parameter lookup - more in response to review - shertel/abadger
* aws ssm parameter lookup unit test - move to mocker according to abadger
* aws ssm parameter lookup - integrate with new documentation fragment
* aws ssm parameter lookup - accept either aws_profile or boto_profile
* aws ssm parameter lookup - eliminate lookup document fragment until env vars are fixed later
* ACI: Change result output as discussed
* Update all modules to use new aci.exit_json()
* Update output_level spec and docs
* Fix integration tests
* Small PEP8 fix
* Asorted fixes to tests and aci_rest
* More test fixes and support for ANSIBLE_DEBUG
* Fix another PEP8 issues
* Move response handling inside ACI module
* Reform of ACI error handling and error output
* Diff multiline json output
* Fix a few more tests
* Revert aci_bd tests
* Small correction
* UI change: existing->current, original->previous
* UI change: config->sent
* Update all modules with RETURN values
* Fix a few more tests
* Improve docstring and add 'raw' return value
* Fix thinko
* Fix sanity/pep8 issues
* Rewrite unit tests to comply with new design
* Fix over-byte
* Update ios tests to call `provider`
To continue to support testing `connection: local`
* Fix command dict handling in ios_user
* Clean up unit tests, too
* Revert model and serialnum to older version
* Add stacked versions of model and serialnum as separate facts
* Add unit test to check stacked output
* Alter model regex to address #34768
Enforce module deprecation.
After module has reached the end of it's deprecation cycle we will replace it with a docs stub.
* Replace deprecated modules with docs-only sub
* Use of deprecated past deprecation cycle gives meaningful message (see examples below)
* Enforce documentation.deprecation dict via `schema.py`
* Update `ansible-doc` and web docs to display documentation.deprecation
* Document that structure in `dev_guide`
* Ensure that all modules starting with `_` have a `deprecation:` block
* Ensure `deprecation:` block is only used on modules that start with `_`
* `removed_in` A string which represents when this module needs **deleting**
* CHANGELOG.md and porting_guide_2.5.rst list removed modules as well as alternatives
* CHANGELOG.md links to porting guide index
To ensure that meaningful messages are given to the user if they try to use a module at the end of it's deprecation cycle we enforce the module to contain:
```python
if __name__ == '__main__':
removed_module()
```
* refactors nios api shared code to handle provider better
This change refactors the shared code to be easily shared between
modules, plugins and dynamic inventory scripts. All parts now implement
the provider arguments uniformly.
This also provides a centralized fix to suppress urllib3 warnings coming
from the requests library implemented by infoblox_client
* fix up pep8 errors
* fix missing var name
* Adding new code for new module and new module_utils with the pip pyfmg package
* Changed login and logout functionality and renamed mod_utils file as well as cleaned up PEP8 syntax
* Removing extra Ansible parameters and fixing more syntax issues
* Fixing more syntax issues and comparing against previous FTNT script module
* Changing import location to pass syntax checks
* Fixing pylint errors
* Removing test files
* Add unit tests and enabling a login session check within main in order to throw error if network connection exception
* Fixing syntax issues for adding unit tests
* Changing case for pip package requirements
* adding comments
* adding version restriction on pip package for testing
* adding version restriction on pip package for testing
* More comments
* Fixing documentation errors and add the ability to skip a test if it isn't present
* Fixing Pep8 error with whitespace (tab) in the row
* Remove compat code for to_unicode, to_str and to_bytes
Code was marked as deprecated and to be removed after 2.4
* Remove is_encrypted and is_encrypted_file
Code was marked as deprecated after 2.4 release.
* Imported lookup plugin from Role
* Plugin cleanup, including:
* Use existing Python YAML parsing
* Remove environment variables as connection options
* Added initial debugging information
* Reworked the lookup plugin using the Python Request library. As it's available through Ansible, it makes communication with Conjur much more straight forward.
* Removed un-used libraries
* Fixed linting issues
* Standardized output on `format` and insure it works for 2.6, 2.7, and 3.x.
* Use quote_plus from the six library for improved python 2/3 behavior.
* Refactored identity & configuration to prefer user's file. This also includes a refactor to remove an un-needed dictionary merge method.
* Removed `requests` in favor of `ansible.module_utils.urls`.
* Refactored netrc loading to warn if host is not present.
* Tests and a refactor to support easier testing.
* Added reference to website
* Fixed two linting errors
* Fixed an extra line found by linting
* Updated file write to use binary to insure config files are written correctly
* Resolved linting issues
* Refactored config & identity loading to take advantage of plugin options
* Cleanup a bunch of small items caught by linting
* Removed extra line caught by linting
* Swapped in pytest and added some tests with mocked network responses
* Pushing to see if this approach works better...
* Refactored be open_url mocking based on feedback
* Fixed a couple linting issues & refactored mocking into each method to attempt to resolve a failing test
* Use a generic MagicMock for python 2.6
* Fixes doc typo
require -> required
* Use `type: path` in identity_file and config_file
Also removes `expanduser` calls below (which will now be called automatically on
paths.)
* Defines maintainers for conjur_variable plugin
* BOTMETA.yml:
** defines $team_cyberark_conjur as maintainers of Conjur Variable plugin
** adds myself and @jvanderhoof to that team
* Adds URLs to relevant documentation for Conjur Variable lookup plugin
* Clarifies "the server," "the machine" -> "controlling host"
The machine identity used is that of the Ansible controlling host, not any
server being provisioned or instructed. This documentation change aims to make
that relationship clear.
* Adds response code to exception message on authentication failure
* Enhances exception messages to specify the controlling host
These error messages are less likely to confuse a user as to which machine is
associated with the files, identities, and configurations being described.
* Adds ANSIBLE_METADATA for Conjur variable lookup plugin
aws_ec2 is an inventory plugin intended to replace uses of the `contrib/inventory/ec2.py`
inventory script.
For advanced grouping, please use the `constructed` inventory plugin.
Add deps/requires for fact collectors
Fact collectors can now set a required_facts
class attribute that will be a set of the names
of fact collectors they require to be run first.
ie, if a collector needs to know the ansible_distribution,
it should set it's required_facts to include 'distribution'
required_facts = set(['distribution'])
If a collector requires another collector, it gets added
to the selected collector names.
We then topological sort the ordering of the collectors
so that deps work out (ie, 'distribution' will run before
'service_mgr')
required_facts were added to the collectors for:
- network (requires 'distribution', 'platform')
- hardware (requires 'platform')
- service_mgr (requires 'distribution', 'platform')
Fix name references for facts (need 'ansible_' prefix)
is service_mgr
Fixes#30753
The accumulated collected_facts was being update
with new facts _after_ filtering them. So only
facts that pass the filter would ever be passed
to other fact collectors.
For 'filter=ansible_service_mgr', even though it requires
the platform and distribution facts and even collects them,
they would get filtered out and never passed to the other
collectors that need them (service_mgr for ex).
Fix is just to add the unfiltered facts to collected_facts.
Adds unit tests for fact filter and collected_facts.
Fixes#32286
The search string used to look for Clear Linux
was changed in 45a9f96774 to
be more specific, but was too specific. Now finding
a substring match for 'Clear Linux' in /usr/lib/os-release
is enough to consider a match.
Since the details of the full name in os-release varies
('Clear Linux Software for Intel Architecture',
'Clear Linux OS for Intel Architecture', etc) the
search string match was failing and would fall back to the
'first word in the release file' method resulting in
ansible_distribution='NAME="Clear'
Also add a meta fact indicating which search string
was matched.
Test case info from:
https://github.com/ansible/ansible/issues/31501#issuecomment-340861535Fixes#31501
Extract vault related bits of DataLoader._get_file_contents to DataLoader._decrypt_if_vault_data
When loading vault password files, detect if they are vault encrypted, and if so, try to decrypt with any already known vault secrets.
This implements the 'Allow vault password files to be vault encrypted' (#31002) feature card from
the 2.5.0 project at https://github.com/ansible/ansible/projects/9Fixes#31002
* Moved the encryption to its own action method.
* removed silly default value for encryption type.
* Code formatting issues from pull request ANSIBOT.
* changed version_added to "2.5"
because of new new options available
* changed version_added to "2.5"
because of new new options available
* changed version_added to "2.5"
because of new new options available
There are changes that the merge config can fail, but the module
will still report success. This adds a blob of code to start
collecting those failures and bubbling up a module failure
accordingly.
* allow shells to have per host options, remote_tmp
added language to shell
removed module lang setting from general as plugins have it now
use get to avoid bad powershell plugin
more resilient tmp discovery, fall back to `pwd`
add shell to docs
fixed options for when frags are only options
added shell set ops in t_e and fixed option frags
normalize tmp dir usag4e
- pass tmpdir/tmp/temp options as env var to commands, making it default for tempfile
- adjusted ansiballz tmpdir
- default local tempfile usage to the configured local tmp
- set env temp in action
add options to powershell
shift temporary to internal envvar/params
ensure tempdir is set if we pass var
ensure basic and url use expected tempdir
ensure localhost uses local tmp
give /var/tmp priority, less perms issues
more consistent tempfile mgmt for ansiballz
made async_dir configurable
better action handling, allow for finally rm tmp
fixed tmp issue and no more tempdir in ballz
hostvarize world readable and admin users
always set shell tempdir
added comment to discourage use of exception/flow control
* Mostly revert expand_user as it's not quite working.
This was an additional feature anyhow.
Kept the use of pwd as a fallback but moved it to a second ssh
connection. This is not optimal but getting that to work in a single
ssh connection was part of the problem holding this up.
(cherry picked from commit 395b714120522f15e4c90a346f5e8e8d79213aca)
* fixed script and other action plugins
ensure tmpdir deletion
allow for connections that don't support new options (legacy, 3rd party)
fixed tests
* Cache tasks as they are queued instead of en masse
This also moves the task caching from the PlayIterator to the
StrategyBase class, where it makes more sense (and makes it easier
to not have to change the strategy class methods leading to an API
change).
Fixes#31673
* Cleaning up unit tests due to 502ca780
This patch is primarily a refactor to make the validate-modules arg-spec
no longer generate a traceback. It additionally includes removal of deprecated
code in the virtual server module.
The main patch is to remove the traceback generating code. There are
other small fixes that were made in addition to doing that.
* Removed re-def of cleanup_tokens.
* Changed parameter args to be keywords.
* Changed imports to include new module_util locations.
* Imports also include developing (sideband) module_util locations.
* Changed to using F5Client and plain AnsibleModule to prevent tracebacks caused by missing libraries.
* Removed init and update methods from most Parameter classes (optimization) as its now included in module_utils.
* Changed module and module param references to take into account the new self.module arg.
* Minor bug fixes made during this refactor.
The main purpose of this patch is to do the refactor that
supports replacing tracebacks with fail_json. Additionally, the
following was done.
* Removed re-def of cleanup_tokens.
* Changed parameter args to be keywords.
* Changed imports to include new module_util locations.
* Imports also include developing (sideband) module_util locations.
* Changed to using F5Client and plain AnsibleModule to prevent tracebacks caused by missing libraries.
* Removed init and update methods from most Parameter classes (optimization) as its now included in module_utils.
* Changed module and module param references to take into account the new self.module arg.
* Minor bug fixes made during this refactor.
Primarily, this patch contains refactors to remove tracebacks that
are generated when libraries are missing. There is also,
* Removed re-def of cleanup_tokens.
* Changed parameter args to be keywords.
* Changed imports to include new module_util locations.
* Imports also include developing (sideband) module_util locations.
* Changed to using F5Client and plain AnsibleModule to prevent tracebacks caused by missing libraries.
* Removed init and update methods from most Parameter classes (optimization) as its now included in module_utils.
* Changed module and module param references to take into account the new self.module arg. Minor bug fixes made during this refactor.
This patch was primarily an effort to reduce traceback errors for
work that sivel was doing. Part of (and in some cases in addition to)
that, the following was done.
* Removed re-def of cleanup_tokens.
* Changed parameter args to be keywords.
* Changed imports to include new module_util locations.
* Imports also include developing (sideband) module_util locations.
* Changed to using F5Client and plain AnsibleModule to prevent tracebacks caused by missing libraries.
* Removed init and update methods from most Parameter classes (optimization) as its now included in module_utils.
* Changed module and module param references to take into account the new self.module arg.
* Minor bug fixes made during this refactor.
* Mellanox OS name change: MLNXOS changed to ONYX
Signed-off-by: Samer Deeb <samerd@mellanox.com>
* Fix alphabetical order of modules metadata
Signed-off-by: Samer Deeb <samerd@mellanox.com>
* Add new module for managing ospf protocol on mlnxos devices
Signed-off-by: Samer Deeb <samerd@mellanox.com>
* Fix test name, and documentation.
Signed-off-by: Samer Deeb <samerd@mellanox.com>
* Allow protection of certain keys during camel_to_snake
Create an `ignore_list` parameter that preserves the case
of the contents of certain dictionaries. Most valuable
for `tags` but other uses might arise.
* Port ec2_vpc_route_table to boto3
Update tests to reflect fixes in boto3.
* Add RETURN documentation to ec2_vpc_route_table
* Update DOCUMENTATION to be valid yaml
* Add check mode tests
* Provide a way to explicitly invoke the debugger with in the debug strategy
* Merge the debugger strategy into StrategyBase
* Fix some logic, pin to a single result
* Make redo also continue
* Make sure that if the debug closure doesn't need to process the result, that we still return it
* Fix failing tests for the strategy
* Clean up messages from debugger and exit code to match bin/ansible
* Move the FieldAttribute higher, to apply at different levels
* make debugger a string, expand logic
* Better host state rollbacks
* More explicit debugger prompt
* ENABLE_TASK_DEBUGGER should be boolean, and better docs
* No bare except, add pprint, alias h, vars to task_vars
* _validate_debugger can ignore non-string, that can be caught later
* Address issue if there were no previous tasks/state, and use the correct key
* Update docs for changes to the debugger
* Guard against a stat going negative through use of decrement
* Add a few notes about using the debugger on the free strategy
* Add changelog entry for task debugger
* Add a few versionadded indicators and a note about vars -> task_vars
* Add new module mlnxos_protocol for enabling disabling protocols on
MLNX-OS Mellanox network devices
Signed-off-by: Samer Deeb <samerd@mellanox.com>
* Fix Test Class name
* Fix IP routing protocol support
Signed-off-by: Samer Deeb <samerd@mellanox.com>
* Add missing support for check_mode, and Fix documentation
Signed-off-by: Samer Deeb <samerd@mellanox.com>
A bug in the parsing of single commands with commas
Token cleanup
Password argument now defaults to false
Addition of coding conventions from v3 conventions
This module can be used to add license offerings to a pool. This
is the second part required to license a remote device from a
BIG-IQ (the first being to create a pool with bigiq_regkey_pool)
* Removes deprecated code from bigip_monitor_tcp
The deprecated code was moved into its own modules. We let it lay
here for a release, and now I'm removing it.
* Fixing upstreaming tests
This module can be used to create GTM servers (not to be confused with
GTM virtual servers) on a BIGIP. GTM servers are a component of the
datacenter, and GTM virtual servers are their members.
* basic.py: add mock to os.path.exists
* set_*_if_different: if check_mode enabled & file missing: set changed to True
Fixes#32676
Thanks to mscherer and Spredzy for the distributed triplet programming
session!
* galaxy unit tests: add missing program name
* galaxy unit tests: remove incorrect switchs
- 'install' action doesn't support '--offline' switch
- 'remove' action doesn't support '--init-path' switch
Code refactor to use f5 coding conventions. Removed deprecated
"enabled/disabled" params (this is now a state). Adds token cleanup
for cases where many api calls are made.
This refactors the bigip_virtual_server module to address several issues and
missing features. Additionally it adds tests and updates the coding standards
to the recent version used by f5. Finally, it removes deprecated items that
were announced in 2.4
* mutually_exclusive add - ios_config parents works with lines by not src
* mutually_execlusive parents,src added to all other net modules
* tests for mutually_exclusive parents,src and whitespce removal
* Add module mlnxos_linkagg for configuring LAG and MLAG on Mellanox
switches
Signed-off-by: Samer Deeb <samerd@mellanox.com>
* Remove unnecessary method in unit-test
remove _execute_module and use execute_module from base class
* update version parsing and move requirements to nso_* modules
prepare for introduction of nso_show module that has other version
requirements than the existing nso_* modules.
* Add nso_show module for retreiving config from Cisco NSO
New module that supports getting configuration and operational data
from Cisco NSO.
Shell is implemented via the command module. There was a special case
in mod_args to do that. Make shell into an action plugin to handle that
instead.
Also move the special case for the command nanny into a command module
action plugin. This is more appropriate as we then do not have to send
a parameter that is only for the command module to every single module.
* WIP adds network subnetting functions
* adds functions to convert between netmask and masklen
* adds functions to verify netmask and masklen
* adds function to dtermine network and subnet from address / mask pair
* network_common: add a function to get the first 48 bits in a IPv6 address.
ec2_group: only use network bits of a CIDR.
* Add tests for CIDRs with host bits set.
* ec2_group: add warning if CIDR isn't the networking address.
* Fix pep8.
* Improve wording.
* fix import for network utils
* Update tests to use pytest instead of unittest
* add test for to_ipv6_network()
* Fix PEP8
This fix check if DNS4 is None or not before proceeding with
other operations. Also, added unit test for this change.
Signed-off-by: Fedor Sumkin <qosys.net@gmail.com>
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
Split the one monolithic test for basic.py into several files
* Split test_basic.py along categories.
This is preliminary to get a handle on things. Eventually we may want
to further split it so each file is only testing a single function.
* Cleanup unused imports from splitting test_basic.py
* Port atomic_move test to pytest.
Working on getting rid of need to maintain procenv
* Split a test of symbolic_mode_to_octal to follow unittest best practices
Each test should only invoke the function under test once
* Port test_argument_spec to pytest.
* Fix suboptions failure
* Fixing aruba's inconsitent indenting.
* Adding config with different children indentation and unit test to confirm the different spacing does not matter.
* Fixing pylint check. Missed an r prefix.
* When inserting a new rule in `insert_after_rule`, check if the old rule is
the last rule, to avoid a list index out of range error when attempting to
access the next rule.
* Add a test for inserting a new rule after the last rule.
Allow CamelCase version of snake_dict_to_camel_dict
(currently only dromedaryCase is supported)
Add reversible option to camel_dict_to_snake_dict
Add tests for both of these options
* TestPlaybookCLI: '--flush-cache' were ignored
Check that using '--flush-cache' does something
* check that '_flush_cache' does something
There isn't any fact by default: the assertion was true even if
'cli._flush_cache()' isn't called.
* Fixing save so it still works. Adding changed as an option for save_when.
* Updating unit tests.
* Updating description to state that changed was added in 2.5.
* Change cast_list_to_dict to more generic rekey_on_member
cast_list_to_dict was taking an arbitrary data format in and returning
an arbitrary data format out. Rework this to be a more generic function
which creates a dict of dicts based on a member of the dict.
Remove cast_dict_to_list since rekey_on_member handles the use cases we
know about and cast_dict_to_list suffers from the same problems as
cast_list_to_dict. If this is still needed we could think about filters
we could add to do this in a short jinja2 pipeline.
* Fix bare excepts (bare excepts even catch sys.exit())
* Fix _clean_result for debug callback with 1 char var names
The check in _clean_results was removing any keys that happened
to be one of the chars in ('invocation') instead of the string
'invocation'. This was meant to be a tuple but there was no comma
so the for iterated the string instead of the tuple.
Introduced in 9dba580204fcc7d95d4ca2ea2ae4ce23fe28c2ed
Update unit test to catch this.
Fixes#33723
* Use .pop() to remove invocation from results dict
In base callback _clean_results, simplify the way the
'invocation' item is removed.
Add some more unit tests.
* Deprecate Entity, EntityCollection and use subspec in network modules
* As per proposal https://github.com/ansible/proposals/issues/76
deprecate use of Entity, EntityCollection, ComplexDict, ComplexList
and use subspec instead.
* Refactor ios modules
* Refactor eos modules
* Refactor vyos modules
* Refactor nxos modules
* Refactor iosxr modules
* Add support for key in suboptions handling
* Fix CI issues
* - Netconf plugin addition for iosxr
- Utilities refactoring to support netconf and cliconf
- iosx_banner refactoring for netconf and cliconf
- Integration testcases changes to accomodate above changes
* Fix sanity failures, shippable errors and review comments
* fix pep8 issue
* changes run_command method to send specific command args
* - Review comment fixes
- iosxr_command changes to remove ComplexDict based command_spec
* - Move namespaces removal method from utils to netconf plugin
* Minor refactoring in utils and change in deprecation message
* rewrite build_xml logic and import changes for new utils dir structure
* - Review comment changes and minor changes to documentation
* * refactor common code and docs updates
In case of workflow delete action, the returned 404 status code
considered as invalid although it's a valid code for not found (deleted)
entity.
Removed verification of the status. Only success should be verified.
Fixes#33524
* Porting tests to pytest
* Achievement Get: No longer need mock/generator.py
* Now done via pytest's parametrization
* Port safe_eval to pytest
* Port text tests to pytest
* Port test_set_mode_if_different to pytest
* Change conftest AnsibleModule fixtures to be more flexible
* Move the AnsibleModules fixtures to module_utils/conftest.py for sharing
* Testing the argspec code requires:
* injecting both the argspec and the arguments.
* Patching the arguments into sys.stdin at a different level
* More porting to obsolete mock/procenv.py
* Port run_command to pytest
* Port known_hosts tests to pytest
* Port safe_eval to pytest
* Port test_distribution_version.py to pytest
* Port test_log to pytest
* Port test__log_invocation to pytest
* Remove unneeded import of procenv in test_postgresql
* Port test_pip to pytest style
* As part of this, create a pytest ansiblemodule fixture in
modules/conftest.py. This is slightly different than the
approach taken in module_utils because here we need to override the
AnsibleModule that the modules will inherit from instead of one that
we're instantiating ourselves.
* Fixup usage of parametrization in test_deprecate_warn
* Check that the pip module failed in our test
* Refactor common network shared and platform specific code into package (part-1)
As per proposal #76 refactor common network shared and platform specific
code into sub-package.
https://github.com/ansible/proposals/issues/76
* ansible.module_utils.network.common - command shared functions
* ansible.module_utils.network.{{ platform }} - where platform is platform specific shared functions
* Fix review comments
* Fix review comments
* Refactors bigip_node
Includes a number of fixes and enhancements in addition to refactoring
the code to be inline with f5 standards
* Fixes upstream errors
* Adds bigip_policy_rule module
This module is the second component of managing LTM policies on
BIG-IP. This module lets you manage the rules of a policy
* Fixing upstream errors
* Correcting YAML errors
* Fixes and features for bigip_provision
Adds support for dedicated modules. Fixes bug in minimum name.
Adds wrappers around checking for up-ness so that they will contribute
to the watch loop
* Fixes upstream errors
* Added . and / to rule args regexp
Things like pam_echo.so file=/etc/foo.txt weren't being matched and
causing incorrect change counts. Adding / and . fixed that.
Fixes#33351
* pamd: test argument with value
Relates #33351
* Adding module enos_config and its UT files
* Removing trailing line
* Removing trailing lines
* Editing enos_module.py to fix build errors
* Removing blank lines in end
* Updating enos_config.py based on review comments
* Adding one more blank line
* Removing training white space
* Removing test_enos_config_force method from UT
* Updating documentation
* Comments by John, Remove version_added: "2.5"
* Add netscaler_nitro_request module
* Make changes as requested.
* Fix whitepsace in EXAMPLES block.
* Set module changed status according to operation performed.
* Added support to Datacenter resources in HPE OneView
* Adjusting comments in oneview_datacenter_facts
* Adding no_log on the documentation
* Using Pytest to Oneview DatacenterFactsModule tests
* Warn on tests used as filters
* Update docs, add aliases for tests that fit more gramatically with test syntax
* Fix rst formatting
* Add successful filter, alias of success
* Remove renamed_deprecation, it was overkill
* Make directory alias for is_dir
* Update tests to use proper jinja test syntax
* Update additional documentation, living outside of YAML files, to reflect proper jinja test syntax
* Add conversion script, porting guide updates, and changelog updates
* Update newly added uses of tests as filters
* No underscore variable
* Convert recent tests as filter changes to win_stat
* Fix some changes related to rebasing a few integration tests
* Make tests_as_filters_warning explicitly accept the name of the test, instead of inferring the name
* Add test for tests_as_filters_warning
* Update tests as filters in newly added/modified tests
* Address recent changes to several integration tests
* Address recent changes in cs_vpc
* add type manipulation
* update for py3
* add tests for list to dict
* Add dict to list tests
* Update tests to search for regex in response
* pep8 clean up
* update Exception for py3
* update test to be py2/3 compat
* update for py26 compat
* potential fix for py3 and py26
* potential fix for py3 and py26 take2
* add new line to kick off shippable
* remove cache file created
* fix filter name
* add space for shipable
* Fix junos integration test fixes as per connection refactor (#33050)
Refactor netconf connection plugin to work with netconf plugin
* Fix junos integration test fixes as per connection refactor (#33050)
Refactor netconf connection plugin to work with netconf plugin
Fix CI failure
Fix unit test failure
Fix review comments
* Adding aliases for field attributes and renaming async attribute
As of Python 3.7, the use of async raises an error, whereas before the use
of the reserved word was ignored. This adds an alias field for field attrs
so that both async and async_val (interally) work. This allows us to be
backwards-compatible with 3rd party plugins that may still reference Task.async,
but for the core engine to work on Py3.7+.
* Remove files fixed for 'async' usage from the python 3.7 skip list
* Allow the user to circumvent adding -tt on ssh commands to help aid in
debugging ssh related problems.
* Move config to the plugin
* Set version_added
* Change yaml section to "connection"
* Fix ssh unit tests
* jsonify inventory
* smarter import, dont pass kwargs where not needed
* added datetime
* Eventual plan for json utilities to migrate to common/json_utils when we split
basic.py no need to move jsonify to another file now as we'll do that later.
* json_dict_bytes_to_unicode and json_dict_unicode_to_bytes will also
change names and move to common/text.py at that time (not to json).
Their purpose is to recursively change the elements of a container
(dict, list, set, tuple) into text or bytes, not to json encode or
decode (they could be a generic precursor to that but are not limited
to that.)
* Reimplement the private _SetEncoder which changes sets and datetimes
into objects that are json serializable into a private function
instead. Functions are more flexible, less overhead, and simpler than
an object.
* Remove code that handled simplejson-1.5.x and earlier. Raise an error
if that's the case instead.
* We require python-2.6 or better which has the json module builtin to
the stdlib. So this is only an issue if the stdlib json has been
overridden by a third party module and the simplejson on the system
is 1.5.x or less. (1.5 was released on 2007-01-18)
* Add new filter to parse xml output for network use cases
Fixes#31026
* Add parse_xml filter
* Add documentation for parse_xml filter
* Edited for clarity.
* Fix review comment and add unit tests
* Fix unit test CI failure
* Fix CI issues
* Fix unit test failures
* Fix review comments
* More copy edits.
* Adding RPC attribute arguments to `junos_rpc` network module.
* Specifying module argument version.
* Fixing DOCUMENTATION block.
* First attempt at new test fixture.
* Updated RPC_CLI_MAP.
* Use `result` instead of `reply`.
This module can be used to manage guests on a vCMP provisioned BIG-IP.
vCMP is a hardware-only feature, therefore this module cannot be used
on the VE editions of BIG-IP.
* move set_module_args to units.modules.utils
* unit tests: reuse set_module_args
* unit tests: mock exit/fail_json in module.utils.ModuleTestCase
* unit tests: use module.utils.ModuleTestCase
* unit tests: fix 'import shadowed by loop variable'
* included inventory and callback in new config
allow inventory to be configurable
updated connection options settings
also updated winrm to work with new configs
removed now obsolete set_host_overrides
added notes for future bcoca, current one is just punting, it's future's problem
updated docs per feedback
added remove group/host methods to inv data
moved fact cache from data to constructed
cleaner/better options
fix when vars are added
extended ignore list to config dicts
updated paramiko connection docs
removed options from base that paramiko already handles
left the look option as it is used by other plugin types
resolve delegation
updated cache doc options
fixed test_script
better fragment merge for options
fixed proxy command
restore ini for proxy
normalized options
moved pipelining to class
updates for host_key_checking
restructured mixins
* fix typo
* Fix vault --ask-vault-pass with no tty
2.4.0 added a check for isatty() that would skip setting up interactive
vault password prompts if not running on a tty.
But... getpass.getpass() will fallback to reading from stdin if
it gets that far without a tty. Since 2.4.0 skipped the interactive
prompts / getpass.getpass() in that case, it would never get a chance
to fall back to stdin.
So if 'echo $VAULT_PASSWORD| ansible-playbook --ask-vault-pass site.yml'
was ran without a tty (ie, from a jenkins job or via the vagrant
ansible provisioner) the 2.4 behavior was different than 2.3. 2.4
would never read the password from stdin, resulting in a vault password
error like:
ERROR! Attempting to decrypt but no vault secrets found
Fix is just to always call the interactive password prompts based
on getpass.getpass() on --ask-vault-pass or --vault-id @prompt and
let getpass sort it out.
* up test_prompt_no_tty to expect prompt with no tty
We do call the PromptSecret class if there is no tty, but
we are back to expecting it to read from stdin in that case.
* Fix logic for when to auto-prompt vault pass
If --ask-vault-pass is used, then pretty much always
prompt.
If it is not used, then prompt if there are no other
vault ids provided and 'auto_prompt==True'.
Fixes vagrant bug https://github.com/hashicorp/vagrant/issues/9033Fixes#30993
* Adding git_command module and its UT file
* Changing Author Name and removing 2 blank lines
* Removing blank lines
* Adding enos_config and its UT files
* Removing config module as I am allowed to have only module per PR
* Work on Ganesh's Review comments
* John Review Comments on enos_command.py
* Review comments of John
* Add mtu option nxos_interface feature idea
Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>
* Add unit test for mtu feature
Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>
* Better handling of malformed vault data envelope
If an embedded vaulted variable ('!vault' in yaml)
had an invalid format, it would eventually cause
an error for seemingly unrelated reasons.
"Invalid" meaning not valid hexlify (extra chars,
non-hex chars, etc).
For ex, if a host_vars file had invalid vault format
variables, on py2, it would cause an error like:
'ansible.vars.hostvars.HostVars object' has no
attribute u'broken.example.com'
Depending on where the invalid vault is, it could
also cause "VARIABLE IS NOT DEFINED!". The behavior
can also change if ansible-playbook is py2 or py3.
Root cause is errors from binascii.unhexlify() not
being handled consistently.
Fix is to add a AnsibleVaultFormatError exception and
raise it on any unhexlify() errors and to handle it
properly elsewhere.
Add a _unhexlify() that try/excepts around a binascii.unhexlify()
and raises an AnsibleVaultFormatError on invalid vault data.
This is so the same exception type is always raised for this
case. Previous it was different between py2 and py3.
binascii.unhexlify() raises a binascii.Error if the hexlified
blobs in a vault data blob are invalid.
On py2, binascii.Error is a subclass of Exception.
On py3, binascii.Error is a subclass of TypeError
When decrypting content of vault encrypted variables,
if a binascii.Error is raised it propagates up to
playbook.base.Base.post_validate(). post_validate()
handles exceptions for TypeErrors but not for
base Exception subclasses (like py2 binascii.Error).
* Add a display.warning on vault format errors
* Unit tests for _unhexlify, parse_vaulttext*
* Add intg test cases for invalid vault formats
Fixes#28038
* implements jsonrpc message passing for ansible-connection
* implements more generic mechanism for persistent connections
* starts persistent connection in task_executor if enabled and supported
* supports using network_cli as top level connection plugin
* enhances logging for persistent connection to stdout
* Update action plugins
* Fix Python3 RPC
* Fix Junos bytes<-->str issues
* supports using netconf as top level connection plugin
* Error message when running netconf on an unsupported platform
* Update tests
* Fix `authorize: yes` for `connection: local`
* Handle potentially JSON data in terminal
* Add clarifying detail if possible on ConnectionError
* Squashing all commits to one as suggested by John
* Adding Unit test method for the module enos_facts.py
* Pep8 and Ylint issues addressed
* Trying again to remove blank line. Some scripts are required for this.
* Bug Fixing for interfaces
* Editing for over indenting issue
* E203 whitespace before ','
* Update enos.py
Added warnings argument as to check_args method
* Update enos_facts.py
Added warnings to check_args method
* When getting the stack events we need to consider the case where we don't have ClientRequestToken fixes#32396
* Adding tests for the case when the ClientRequestToken is not present in the stack creation.
* Renaming the stack that the test for Client Request Token requires so it won't cause collisions with the basic test.
* Ensure include_role unit tests check something
This is not the case: get_tasks_vars doesn't yield
* Fix include_role unit tests
Since e609618274, include_role are not
static anymore.
* Add some tests for iptables
* Fix remove bug (calls 2 times check to remove a chain)
* Add me as maintainer
* Fix PEP8
* Doc: Give more information on issue #18988
* Fix#18988 and test it
* Fix doc (thanks Pillou)
* enable PEP8 check for iptables
This patch addresses a number of issues, large and small, that were
identified by users in the downstream repo.
* formatting of some code
* specific option combinations leading to errors
* missing includes for unit tests
* ios_logging: Fix typo in documentation
* ios_logging: Fix traceback when setting buffered destination without size
When the size parameter is not configured while configuring the buffered
destination, a traceback occurs due to the fact that validate_size expects the
parameter to be an int. Explicitely converting value to int makes the
check work for every case.
* ios_logging: Update size parameter documentation
Update the documentation of the size paramter to reflect the current behaviour
of setting a default of 4096 for the buffered dest.
* ios_logging: Add unit test
Add unit test for ios_logging testing the behaviour clarified in the previous
commits.
* ios_logging: Fix python 2.6 compliance
This module's purpose is to specifically manage the ssl keys. It
is essentially the key component of the bigip_ssl_certificate module.
The modules were separated and the key portion deprecated from
bigip_ssl_certificate in favor of this module.
* - Adds iosxr_netconf module to configure netcong service on Cisco
IOS-XR devices
* - Adds Integration test for module
- Handles diff return from load_config
* - Adds unit test for iosxr_netconf module
* Start using ClientRequestTokens in event lists
* Include request token in all reqs that support it (basically all but check mode/changeset)
* Update placebo recordings
* Add comments for CRQ popping
Module allows you to wait for a bigip device to be
"ready" for configuration. This module will wait for things like
the device coming online as well as the REST API and MCPD being
ready.
If all of the above is not online and ready, then no configuration
will be able to be made.
* better cleanup on task results display
callbacks get 'clean' copy of result objects
moved cleanup into result object itself
removed now redundant callback cleanup
moved no_log tests
* moved import as per feedback
In this refactor we moved to the most recent coding standards for
both F5 and Ansible. Many bugs were fixed and some features were
also added (such as ipv6 support).
New conventions for ansible warrant fixes to accomodate those
in bigip_partition.
This patch also includes an import fix that can raise an error when
Ansible unit tests run
This adds a new type of vault-password script (a 'client') that takes advantage of and enhances the
multiple vault password support.
If a vault password script basename ends with the name '-client', consider it a vault password script client.
A vault password script 'client' just means that the script will take a '--vault-id' command line arg.
The previous vault password script (as invoked by --vault-password-file pointing to an executable) takes
no args and returns the password on stdout. But it doesnt know anything about --vault-id or multiple vault
passwords.
The new 'protocol' of the vault password script takes a cli arg ('--vault-id') so that it can lookup that specific
vault-id and return it's password.
Since existing vault password scripts don't know the new 'protocol', a way to distinguish password scripts
that do understand the protocol was needed. The convention now is to consider password scripts that are
named like 'something-client.py' (and executable) to be vault password client scripts.
The new client scripts get invoked with the '--vault-id' they were requested for. An example:
ansible-playbook --vault-id my_vault_id@contrib/vault/vault-keyring-client.py some_playbook.yml
That will cause the 'contrib/vault/vault-keyring-client.py' script to be invoked as:
contrib/vault/vault-keyring-client.py --vault-id my_vault_id
The previous vault-keyring.py password script was extended to become vault-keyring-client.py. It uses
the python 'keyring' module to request secrets from various backends. The plain 'vault-keyring.py' script
would determine which key id and keyring name to use based on values that had to be set in ansible.cfg.
So it was also limited to one keyring name.
The new vault-keyring-client.py will request the secret for the vault id provided via the '--vault-id' option.
The script can be used without config and can be used for multiple keyring ids (and keyrings).
On success, a vault password client script will print the password to stdout and exit with a return code of 0.
If the 'client' script can't find a secret for the --vault-id, the script will exit with return code of 2 and print an error to stderr.
* documentation was not inline with other Ansible modules
* Python 3 specific imports were missing
* monitor_type is no longer required when creating a new pool; it is now the default.
* A new monitor_type choice of "single" was added for a more intuitive way to specify "a single monitor". It uses "and_list" underneath, but provides additional checks to ensure that you are specifying only a single monitor.
* host and port arguments have been deprecated for now. Please use bigip_pool_member instead.
* 'partition' field was missing from documentation.
* A note that "python 2.7 or greater is required" has been added for those who were not aware that this applies for ALL F5 modules.
* Unit tests were fixed to support the above module
* Adding a cli transport option for the bigip_command module.
* Fixing keyerror when using other f5 modules. Adding version_added for new option in bigip_command.
* Removing local connection check because the F5 tasks can be delegated to any host that has the libraries for REST.
* Using the network_common load_provider.
* Adding unit test to cover cli transport and updating previous unit test to ensure cli was not called.
* Fix rollback in junos_config
Fixes#30778
* Call `load_configuration` with rollback id in case
the id is given as input
* Pass rollback id to `get_diff()` to fetch diff from device
* Fix unit test
- old functionality is still available direct lookup use, the following are equivalent
with_nested: [[1,2,3], ['a','b','c']]
loop: "{{lookup('nested', [1,2,3], ['a','b','c'])}}"
- avoid squashing with 'loop:'
- fixed test to use new intenal attributes
- removed most of 'lookup docs' as these now reside in the plugins
* Make ansible_selinux facts a consistent type
Rather than returning a bool if the Python library is missing, return a dict with one key containing a message explaining there is no way to tell the status of SELinux on the system becasue the Python library is not present.
* Fix unit test
The /etc/os-release based distro detection doesn't
seem to work for Ubuntu 10.04 (no /etc/os-release?).
So it was testing the next case which was /etc/lsb-release to
see if it is 'Mandriva'. Since the check for existence of
(/etc/lsb-release, Mandrive) was the first non-empty dist
file match, 'ansible_distribution' was being set to 'Mandriva'
expecting to be corrected by the data from the dist file content.
But since the dist file parsing for Mandriva didn't match for
Ubuntu 10.04 /etc/lsb-release _and_ there is no Debian specific
lsb-release check, 'ansible_distribution' stayed at 'Mandriva'
and the dist file checking loop keeps going and eventually off
the end of the list before finding a better match.
Adding a debian/ubuntu specific check for /etc/lsb-release after
the debian os-release sets the info correctly and stops further
checking of dist files.
Fixes#30693
* Added support to retrieving LIG resources in HPE OneView
* Fixing copyright header according to review
* Swapping out config for full credentials in parameter for documentation
* Added support to retrieving Enclosures in HPE OneView
- Added unit tests
* Updated version_added to 2.5
* Changing return type of enclosure_script to string
* Fixing copyright header according to review
* Replaced config for credentials in parameters for documentation
* Fix fact failures cause by ordering of collectors
Some fact collectors need info collected by other facts.
(for ex, service_mgr needs to know 'ansible_system').
This info is passed to the Collector.collect method via
the 'collected_facts' info.
But, the order the fact collectors were running in is
not a set order, so collectors like service_mgr could
run before the PlatformFactCollect ('ansible_system', etc),
so the 'ansible_system' fact would not exist yet.
Depending on the collector and the deps, this can result
in incorrect behavior and wrong or missing facts.
To make the ordering of the collectors more consistent
and predictable, the code that builds that list is now
driven by the order of collectors in default_collectors.py,
and the rest of the code tries to preserve it.
* Flip the loops when building collector names
iterate over the ordered default_collectors list
selecting them for the final list in order instead
of driving it from the unordered collector_names set.
This lets the list returned by select_collector_classes
to stay in the same order as default_collectors.collectors
For collectors that have implicit deps on other fact collectors,
the default collectors can be ordered to include those early.
* default_collectors.py now uses a handful of sub lists of
collectors that can be ordered in default_collectors.collectors.
fixes#30753fixes#30623
