* Consistent Modules - Rename updated_?? to desired_?? in all the keycloak modules.
* Consistent Modules - Rename the comments, and add whitespace so that all the modules are a lot more consistent between each other.
* Consistent Modules - Remove final elif where a final else doesn't exist.
This is to address the inconsistency between the other modules.
Whilst I can see it being more descriptive, there should be a final "else:" to cater if the values is neither 'absent' or 'present'.
* Consistent Modules - Use dict() instead of {} like most of the other keycloak modules.
* Consistent Modules - Update keycloak authentication so that the if ordering is consistent for no-item.
* Consistent Modules - Move the 'Filter and map' process to always occur before getting an existing item.
* Consistent Modules - Be consistent with how to initialse before_?? and set it to dict() if it is None.
* Consistent Modules - Add module.exit_?? in the locations as per the other modules.
* Consistent Modules - Represent result['diff'] using dict(before=.., after=...) as per all the other modules.
* Consistent Modules - Add / Move location of when result['end_state'] is getting defined.
* Consistent modules - Add result['changed'] = False where we do nothing and exit because item exists.
* Consistent Modules - Set the value result['changed'] to True earlier so it shows up when in checking mode only.
* Consistent Modules - test for equality with a dict to assert there was no realm in the first place as per the other modules.
* Consistent Modules - Address the spelling.
* Consistent Modules - keycloak_group - Remove result['group'] as result['end_state'] is the consistent value used in the other modules.
* Consistent Modules - Order the lines in the section, Do nothing and exit consistently.
* Consistent Modules - Add result['end_state'] and still add deprecated `flow` return value.
* Consistent Modules - Add missing return documentation for `msg`.
* Consistent Modules - Tweak whitespace in the RETURN variable.
* Consistent Modules - Add result['group'] in addition to deprecated result['group'] response.
* Consistent Modules - Add return property, 'contains' to address test errors.
* Consistent Modules - Rename updated_?? to desired_?? in new modules since initial PR.
* Consistent Modules - Rename the comments, and add whitespace so that all the (recently added) modules are a lot more consistent between each other.
* Consistent Modules - Make indentation consistent within the response document.
* Consistent Modules - Use B(DEPRECATED) in a seperate line in the description.
* Consistent Modules - Add a lot of full stops to sentences.
* Consistent Modules - Use C(...) and I(...) formatting methods.
* Consistent Modules - Use "on success" everywhere for end_state response documentation.
* Consistent Modules - Update the documents for RETURN.proposed, RETURN.existing, RETURN.end_state to be the same.
* Consistent Modules - Add fragment.
* Remove period after short_description.
* Update changelog fragment.
* Consistent Modules - PRFeedback - Remove `module.exit_json(**result)` within the `Delete` section of the if statement.
There's a exit_json(..) immediately after.
* Consistent Modules - PRFeedback - Use `if not x_repr` instead of `if x_repr == dict()`.
* keycloak_authentication - Add a sample of the output.
* Replace `dict()` with `{}` for all the keycloak modules.
* Add the requested deprecated notices
* Update changelogs/fragments/3280-keycloak-module-cleanup-and-consistency.yml
Co-authored-by: Pierre Dumuid <pierre@knowyourdata.com.au>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Added redis_incr module
Added redis_incr module and unit tests for the module.
Added suggested changes to increment_float, increment_int stuff
* rebased to main, version fix and unit test fix
* Renamed module,added check_mode and fixed retun value
* Update .github/BOTMETA.yml
* check_mode fix and version bump
* fix for lower Redis versions
* Update plugins/modules/database/misc/redis_data_incr.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Fix exception in pkgin module when all packages are already installed.
* Update plugins/modules/packaging/os/pkgin.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Add changelog fragment for #3583
Co-authored-by: Felix Fontein <felix@fontein.de>
* pkgng: package reinstallations count as changed
`upgrade_packages()` only looked for the string
"Number of packages to be upgraded", but the
`pkg upgrade` command also reports "Number of packages to be
reinstalled". Reinstallation occurs when package metadata other
than version changes (e.g. build options, single architecture to `*`
architecture). In any other respect, though, a required
reinstallation is the same as an upgrade.
* pkgng: check_mode should count queued actions
Writing tests caught a bug in PR #3393, which enabled
installing more than one package per `pkg` execution.
In converting the module's install/upgrade code to a
queue structure, check_mode got broken because the count
of actions performed was only updated in the `if not check_mode`
block that invokes `pkg`. This two-line change counts
the number of actions in the queue when check mode is
enabled.
* pkgng: add basic integration tests
Test installing a package
Test installing a package into a jail
* pkgng: test with zsh not bash package
Had been using bash package, because it's not
likely to disappear from the package repository
any time soon. Turns out that bash is already
installed on the Ansible community.general
FreeBSD CI VM image, which makes the test fail.
Zsh probably isn't going away any time soon,
either, and likely won't be installed on the
CI image.
* pkgng: remove redundant test for docker container
These tests should be skip/docker, but the test
playbook also redundantly checked whether it was
running in a docker container.
Checking whether `ansible_facts.distribution` is
`FreeBSD` is really sufficient to be sure whether
the test is running in an environment that supports
the `pkgng` module.
* pkgng: add state=absent test
Also renumber `jail=...` test to make diffs less
noisy when adding more non-jailed tests.
* pkgng: add state=latest idemptency test
Add test between state=present and
state=absent that ensures state=latest runs
successfully on an already up-to-date package
with changed=false.
* pkgng: add state=latest test
Including small filesize out-of-date package from
FreeBSD 11 package repository, because FreeBSD 11 is
currently EOL. This test might fail at some point in the
future if the pkg utility in a FreeBSD version > 14
makes breaking changes that prevents it from installing
older package formats.
If that occurs, the fix is to replace
`files/freebsd-release-manifests-20210413__FreeBSD_11.pkg`
with the version of freebsd-release-manifests from the oldest
non-breaking release of FreeBSD, and update the
references to it in tasks/main.yml accordingly.
* pkgng: use hand-generated test package
Instead of relying on a broken-ish installation
of an older package from FreeBSD 11, hand-generate
a package named `zsh` with no contents and a version
number of `0`. It can be installed on any architecture
and any revision of FreeBSD sucessfully, and it will
always be eligible for upgrade.
* pkgng: CI seems to dislike plus-signs in filenames
* pkgng: refactor renaming test package manifests
refactored to make intent of adding '+' sign clearer
* pkgng: refactor upgraded pattern matching
Implement russoz's suggestion to put all
variants in the pattern.
* pkgng: add cached=yes test
Changed idempotency test, because this covers both.
* pkgng: test pkg works on any FreeBSD version
Removing `ansible_distribution_version`, because the
test out-of-date zsh package should install on any
FreeBSD version.
* pkgng: move FreeBSD tasks to imported file
Refactoring tests for more reuse and easier
readability.
* pkgng: refactor tests for task reuse
Several tests need to install an out-of-date package
to test whether upgrades occur successfully, so this
commit refactors out the generation of the test package.
Also, factor out things like the name and path of the
test package so that is more maintainable should the
target test package (currently `zsh`) ever need to
change.
* pkgng: test install multiple packages
Multiple packages should install with a single
invocation of the `pkg` utility.
* pkgng: handle space- and comma-separated lists
The module expects a list of strings in the `name` parameter,
but long-standing documentation showed space- and comma-delimited
lists as a valid way of telling the module to act on multiple
packages. Passing these lists through to the `pkg` command can
have unexpected side-effects of upgrading packages when
`state=present` rather than `state=latest` and could result
in the module reporting the wrong number of packages for each
action performed.
* pkgng: test state=latest for mixed install/upgrade
Test that a list of packages given, one not installed
and one installed but out-of-date are handled correctly.
* pkgng: use YAML lists for multiple packages
I had been following the documentation examples, and
specifiying multiple packages on one line. The right way
to do it is with YAML list syntax.
* pkgng: add test for autoremove=yes
Install package with known dependencies, then
remove it and ask autoremove to run.
* pkgng: test autoremove=yes only on FreeBSD > 12
The CI test runner on FreeBSD 12.0 times out when
downloading large packages.
* pkgng: test jail creation logging less verbose
`ezjail-admin` had been spewing every filename copied
into the jail onto stderr, making the `ansible-test -v`
logs hard to scroll through. Changed it so that ezjail
output only shows up in the ansible task logs if
`ansible_verbosity > 1` (`-vv...`). Full `ezjail-admin`
output is always logged to `/tmp/ezjail.log`.
* pkgng: pass tests when package dependencies change
Tests that install packages with dependencies were failing
when those dependencies were not already installed, because
the count of installed packages was greater than the count
of requested to be installed packages. This change checks
for a count of installed packages that is greater than or
equal to the count of requested to be installed packages.
Example:
- Test installs packages `zsh` and `fish`
- `fish` has a dependency on `pcre2`
- `pkg` reports `Number of packages to be installed: 3`
* pkgng: test annotation for single package
Add/modify/remove annotation for a single package
* pkgng: fix annotation operations
Annotation has been broken at least since the migration to
collections. There are some breaking typos and function argument
omissions in the code with nothing in `git blame` but "Initial commit".
New integration tests uncovered this breakage. Works now.
* pkgng: test multiple annotations
Test multiple annotations specified both in new (YAML list)
syntax and old (comma-delimited) syntax.
Rename some annotation test tags from the single-annotation
tests to make sure that single and multiple annotation tests
don't collide.
* pkgng: test invalid annotate strings
Ensure that some likely to occur, invalid strings
given to the annotate module parameter 1. fail,
2. do not cause an exception, and 3. do not create
any actual annotations on packages.
* pkgng: fix check_mode for annotate
Actions specified in the `annotate` parameter would
always be performed, even if `check_mode=yes`.
This commit fixes `check_mode` for the annotation
functions and adds integration tests to ensure that
check mode is honored in the future.
* pkgng: call module.run_command with list
Instead of calling `run_command` with a formatted
string, call it with a list to maintain safer argument
separation.
Also, introduce a wrapper for `run_command`, `run_pkgng`,
which manages the process environment and some common
command line switches, based upon the module parameters.
Introduced in this commit, also pass annotation values
to `pkg annotate` via stdin, which is safer with long
values than putting them in argv.
* pkgng: update documentation to match annotate type
Missed updating the documentation to match the change
of the annotate parameter from comma-separated string
to list of strings.
* pkgng: fix syntax for Python 2
Seems *args, **kwargs have to be the last
two arguments in Python 2 syntax. CI sanity
tests were failing.
* pkgng: oops, pkgsite should be from closure
I put `pkgsite` as a keyword argument to `run_pkgng()',
which wasn't correct at all and resulted it in capturing
the second positional argument given by any caller.
`pkgsite` should have been `p["pkgsite"]`, coming from the
closure environment of `main()`.
* pkgng: Fix changelog fragment quote formatting
Co-authored-by: Felix Fontein <felix@fontein.de>
* pkgng: add test prepare task
Make sure test environment does not contain the
test package.
* pkgng: make integration test package more flexible
Make integration test package building template-based,
so more flexible if in the future the name of the test package,
currently `zsh`, must change.
* pkgng: convert generator to list for 2.9
Ansible 2.9 can't count items from a generator,
so convert `select` filter output via `list`
before passing to `count`.
* pkgng: Ansible 2.9 has no "false" Jinja2 test
Apparently Ansible 2.9 doesn't have the "false" test
in Jinja2 contexts. Switching to use `rejectattr(...)`
instead of `selectattr(..., "false")`.
* pkgng: test pkgsite parameter
* pkgng: add tests for chroot and rootdir params
Refactor install tasks into an include file so they
can be reused and tested with various parameters.
* pkgng: clean up test package creation
Make pkg json manifest more readable. Create package using
FreeBSD's `pkg create` instead of manually using tar. This
change also simplifies the manifest to a single file for
the integration test role.
* pkgng: fix#3428; install from local file
Fixes a bug in which the module reported failure
when installing from a local (to the target host)
file path.
Fixes#3428
* pkgng: changelog fragment formatting issue
* pkgng: check for all test package extensions
pkg recently changed file extensions, so for the
tests to work on multiple recent versions of FreeBSD,
we must check for `pkg create` output with varying
filename.
* Revert "pkgng: fix#3428; install from local file"
As the module has invoked pkg with the `-g` flag for
at least 7 years, I'm not sure when it was possible
to install packages from files on the target host
filesystem, because pkg rejects file paths when
the `--glob` flag is enabled.
I considered doing a rework of the pkg invocation
to enable good support for installing from local
files, but it looks like more of a job than for this PR.
This reverts commit 5f94eac41f.
* pkgng: Add minor_changes fragment for #3526
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Redfish: Do not set the boot source override mode if not provided by the user
Signed-off-by: Mike Raineri <michael.raineri@dell.com>
* Corrected changelog file extension
Signed-off-by: Mike Raineri <michael.raineri@dell.com>
* Update changelogs/fragments/3509-redfish_utils-SetOneTimeBoot-mode-fix.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* nmcli: Fix ipv6.dns not being recongnized as list
There was a missing comma on the previous line.
* nmcli: Add changelog fragment for #3563
* nmcli: Update changelogs/fragments/3563-nmcli-ipv6_dns.yaml
Make the fix description more descriptive
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
* nmcli: Remove ipv4.route-metric from list-typed properties
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
* nmcli: Update fragment 3563 with ipv4.route-metric bug
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
* Redfish: perform manager network interface configuration even if property is missing
Signed-off-by: Mike Raineri <michael.raineri@dell.com>
* Update changelogs/fragments/3404-redfish_utils-skip-manager-network-check.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* [callback][elastic] enrich span with http attributes
* [callback][opentelemetry] fix linting
* [callback][opentelemetry] fix UTs
* [opentelemetry][changelog] add fragment for the service map feature
* Update plugins/callback/opentelemetry.py
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
* [opentelemetry][callback] remove comments
* [opentelemetry][callback] fix UTs
* [opentelemetry][callback] return the value
otherwise a None value returns ParseResultBytes when using urlparse(None)
* [opentelemetry][callback] fix wrong parameter order
* [opentelemetry][callback] support for no interpolated URLs
* [opentelemetry][callback] support for URLs without interpolation in the hostname
* [opentelemetry][callback] fix linting
* Update changelogs/fragments/3558-callback_opentelemetry-enrich_service_map.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
Co-authored-by: Felix Fontein <felix@fontein.de>
* ipa: add append parameter to modify_if_diff
* ipa_group: add state: append
* ipa_group: rework append to an option instead of another state
* ipa_group: append default=no
* ipa_group: add change fragment for new append option
* ipa_group: restore descriptions for group and user
* ipa_group: re-add missed quotation mark
* ipa_group: set default for append in
argument_spec
* ipa_group: add .yml ext to fragement file
* ipa_group: corrections to append description
* ipa_group: refine change fragement text
Co-authored-by: Felix Fontein <felix@fontein.de>
* ipa_group: use correct macros in option descriptions
Co-authored-by: Felix Fontein <felix@fontein.de>
* ipa_group: include append in user and group descriptions
* ipa_group: add version_added
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Add names to tasks in oneview module examples
* Fix task name in github_webhook module example
* Fix trailing whitespace
* Add changelog fragment
* Remove changelog fragment
* Integration Tests for Options added, includes 'proxycommand'
* New option 'forwardagent' added to integration tests
* Missing double quotes added to 'forwardagent' values to enforce handling as string
* New option 'forwardagent' added
* yamllint error resolved
* 'forwardagent' type changed from str to choices (yes/no)
* Changelog added
* correct typo
Co-authored-by: Felix Fontein <felix@fontein.de>
* version info added to new option
Co-authored-by: Felix Fontein <felix@fontein.de>
* fix(ssh_config): option name to snake_case, type str to bool
* fix(ssh_config): convert bool true/false to str yes/no
* fix(ssh_config): rename option to 'forward_agent' in integration test
* fix(ssh_config): args key 'forwardagent' renamed to 'forward_agent'
* fix(ssh_config): 'else' replaced with 'if' statement to cover case when value is 'None'
* increase version_added to 4.0.0
Co-authored-by: Felix Fontein <felix@fontein.de>
* simplify if statement for True/False to yes/no mapping
Co-authored-by: Felix Fontein <felix@fontein.de>
* update comment to better describe functionality
Co-authored-by: Felix Fontein <felix@fontein.de>
* fix(ssh_config): avoid overwrite of existing option in case of None value
* test(ssh_config): case added to verify no changes on existing option if not given in playbook
Co-authored-by: Felix Fontein <felix@fontein.de>
* macports: add stdout and stderr to status (#3499)
* Add changelog fragment
* Update changelogs/fragments/3500-macports-add-stdout-and-stderr-to-status.yaml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Aoife Finch <aoife@finch.ink>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Add elastic callback plugin
* Capture task failures
* Catch errors and add UTs
* Skip 3.5< python versions and install dependency
* fix lint
* Fix linting
* Fix linting
* Add botmeta
* Apply suggestions from code review
Co-authored-by: Felix Fontein <felix@fontein.de>
* It's not required
* As suggested in the code review OrderedDict has been added to the Python stdlib since version 2.7
* Update plugins/callback/elastic.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* pkgng: join package list into one command
Change the pkgng module so all packages being
installed (or upgraded) are acted on in one
command (per action). This will make installs
and upgrades a bit faster, because pkg will be
invoked fewer times per module run. More important,
module actions will be more atomic, making it less
likely that some packages are acted on because they
appear earlier in the argument list.
This change also improves the status reporting of
packages acted on, specifying the number of packages
for each action (install or upgrade).
* pkgng: make upgrade check lazily evaluated
Make upgrade_available an inner function so that the
if statement that checks whether installed packages
are up-to-date only runs the upgrade check on packages
that are already installed. This gets lazily evaluated
because of boolean operator short-circuiting:
https://docs.python.org/3.8/library/stdtypes.html#boolean-operations-and-or-not
Previously, the module would always check for upgrades,
even for not-installed packages, when running with
`state=latest`.
* pkgng: add changelog fragment
* pkgng: Apply changelog suggestions from code review
Co-authored-by: Felix Fontein <felix@fontein.de>
* pkgng: resolve pep8 style issue
Remove inline function. It's purpose would be confusing for
future maintainers, and someone refactoring it to a variable,
with good intentions, would introduce a performance regression.
Including the `query_update()` call in the if expression makes
the intent more legible and still ensures lazy evaluation of the
function call if the first `and` is `False`.
* pkgng: Fix changelog fragment syntax issue
Need to escape quotes so YAML doesn't eat them
Co-authored-by: Felix Fontein <felix@fontein.de>
* pkgng: Improve output message English grammar
Make word "package" plural only if reporting on more than one package
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* If repo option points to .repo file, download for later parsing
* Parse downloaded .repo file content (ini format)
* Validate downloaded file, map values to repodata, workaround to ignore old .repo related code
* Integration Test adjusted to install python package 'requests' first
* Revert "Integration Test adjusted to install python package 'requests' first"
This reverts commit 0d18352c2238d098831ba6d59b66e731fa8f0cd9.
Not allowed to introduce new dependencies at this point, module_utils usage required
* Remove python 'requests' dependency, using 'fetch_url' and 'to_text' from 'ansible.module_utils' instead
* Prefer alias (name) if given instead repo (url)
* If gpgkey was given in .repo file ensure key get automatically imported
* ConfigParser Import made Python2 compatible
* New .repo code moved below existing run-time parameters checks to keep previous logic
* Obsolete workaround removed
* two pylint/pep8 errors fixed
* name added to autorefresh assert
* Missing assert for 'Delete test repo' added
* name added to priority option assert
* name added to check repo is updated by url assert
* name added to check repo is updated by name assert
* name added to check add a repo by releasever assert
* name added to check remove added repo assert
* name added to check add a repo by basearch assert
* name added to check remove added repo #2 assert
* Bugfix to avoid 'KeyError' Exception in if statements
* Refactoring of configparser related code, usage of module_utils, py2 compatibility
* Removal of some leftover from earlier testing
* Integration tests for add/remove repositories by url to .repo file added
* Additional name added to list of test repos that has to be removed
* Test added to verify cleanup of local .repo file after removal via zypper
* Changelog fragment related to PR #3474 added
* yamllint error resolved
* Refactoring to reduce indentation and removal of else statements
* Integration tests added for loading .repo file from local path
* Test .repo file added
* Dependency to setup_remote_tmp_dir added
* New entry added to 'remove repositories added during test'
* Support for .repo file from local path
* Changelog: Ref to https://github.com/ansible-collections/community.general/issues/3466 added
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* [ufw] Insert or delete biased when deletion enabled - as for append or delete.
* [ufw] Insert or delete biased when deletion enabled - as for append or delete.
* [ufw] Insert or delete biased when deletion enabled - as for append or delete.
* [ufw] Insert or delete biased when deletion enabled - as for append or delete.
* [ufw] Insert or delete biased when deletion enabled - as for append or delete.
* [ufw] Insert or delete biased when deletion enabled - as for append or delete.
* [ufw] Insert or delete biased when deletion enabled - as for append or delete.
* [ufw] Insert or delete biased when deletion enabled - as for append or delete.
* [opentelemetry][callback] add option to support enabling plugin in the CI only
* [opentelemetry][callback] add changelog fragment
* Apply suggestions from code review
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
* [opentelemetry][callback] use enable_from_environment
* Apply suggestions from code review
Co-authored-by: Felix Fontein <felix@fontein.de>
* [opentelemetry] ensure the value is true otherwise the plugin is not enabled
* [opentelemetry][changelog] update entry with the new option
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
Co-authored-by: Felix Fontein <felix@fontein.de>
* pipx - new module
* using python instead of python3
* removed ensure_path as it is unused
* ensuring we are running the same python as Ansible
* changed the last solution to adding a pipx_path parameter to the module, with a sensible default
* added docs for the new parameter
* changed param name to executable, and customized it for Darwin
* use executable if passed, otherwise use python -m pipx
* minor update
* added examples
* Update plugins/modules/packaging/language/pipx.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/packaging/language/pipx.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/packaging/language/pipx.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* tests names 324 -> 3.24.0
* ensure tox is uninstalled by the beginning of the test
* Renamed option+suggestions from PR
* improved idempotency
* fixed sanity
* fixed test
Co-authored-by: Felix Fontein <felix@fontein.de>
* Fix: gitlab_deploy_key idempotency
The module was not retrieving all the deploy keys leading to non
idempotency on projects with multiple deploy keys.
SEE: https://python-gitlab.readthedocs.io/en/stable/api-usage.html#pagination
* Update changelogs/fragments/3473-gitlab_deploy_key-fix_idempotency.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Jonathan Piron <jonathanpiron@gmail.com>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Started creating Unit tests for Proxmox Tasks module
* Tried really hard to get the mock to work
* unit tests for the module
* Fixed symslink and permissions
* Suggested changes and more unit tests
* Fixed isFalse
* Apply suggestions from code review
* Update plugins/modules/cloud/misc/proxmox_tasks_info.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* OrderedDict has been added to the Python stdlib since version 2.7
* Docs: cosmetic change in the python lib
* See https://github.com/ansible/ansible/issues/75726
* Add changelog fragment
* Apply suggestions from code review
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Copy the permissions along with file for jboss module
Issue: The deployment file is copied with file content only. The file
permission is set to 440 and belongs to root user. When the
JBossI(Wildfly) server is running under non root account, it can't read
the deployment file.
With is fix, the correct permission can be set from previous task for JBoss
server to pickup the deployment file.
* Update changelogs/fragments/3426-copy-permissions-along-with-file-for-jboss-module.yml
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
* Updated nmcli.py
Amended the routing-rules4 values as list. By this we could add the entries for "routing_rules4" in the form of a list .
* Update nmcli.py
Fixed typo in line #1701
* 3395-nmcli-needs-type.yml
routing_rules4 module argument is currently accepting only string elements. In order to accept multiple values, amended the type of routing_rules4 as list.
* nmcli: amended the routing-rules4 key values as list
routing_rules4 module argument is currently accepting only string elements. In the case of adding multiple entries to routing_rules4, we need to accept values as list.
* Added 3401-nmcli-needs-type.yml
routing_rules4 module argument is currently accepting only string elements. In the case of adding multiple entries to routing_rules4, we need to accept values as lists
* Amended type to 'minor_changes'
Amended type to 'minor_changes' from 'bug_fixes'
* routing_rules4 to a list of element str
nmcli.py - routing_rules4 to a list of element str
* Update changelogs/fragments/3401-nmcli-needs-type.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* nmcli: allow routing-rules4 key values as list
* nmcli: amended the routing-rules4 key values as list
* nmcli: amended the routing-rules4 key values as list
* nmcli: amended the routing-rules4 key values as list
* test_nmcli: amended whitespaces
* Update 3401-nmcli-needs-type.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* Added OpenNebula inventory plugin
Signed-off-by: Kristián Feldsam <feldsam@gmail.com>
* Apply suggestions from code review
Co-authored-by: Andrew Klychkov <aaklychkov@mail.ru>
* Apply suggestions from code review
Co-authored-by: Felix Fontein <felix@fontein.de>
* Removed matching inventory yaml files ending with "one"
Too general word
* Apply suggestions from code review
Co-authored-by: Felix Fontein <felix@fontein.de>
* Apply suggestions from code review
Co-authored-by: Alexei Znamensky <103110+russoz@users.noreply.github.com>
Signed-off-by: Kristian Feldsam <feldsam@gmail.com>
* Added BOTMETA
Signed-off-by: Kristian Feldsam <feldsam@gmail.com>
* Moved import
Signed-off-by: Kristian Feldsam <feldsam@gmail.com>
* Fix indentation problem
Signed-off-by: Kristian Feldsam <feldsam@gmail.com>
* Added group_by_labels, refactored so can be unit tested
Signed-off-by: Kristian Feldsam <feldsam@gmail.com>
* Added unit tests
Signed-off-by: Kristian Feldsam <feldsam@gmail.com>
* Removed blank line
Signed-off-by: Kristian Feldsam <feldsam@gmail.com>
* Apply suggestions from code review
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Andrew Klychkov <aaklychkov@mail.ru>
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Alexei Znamensky <103110+russoz@users.noreply.github.com>
* enable deprecate message for ignore_volatile_options
* fix E128
* add frament 3429
* remove default value and modify the resulting checks
spelling fixes
bump version for deprecated messge
* fix spelling and depricated version
Co-authored-by: Frank Dornheim <“dornheim@posteo.de@users.noreply.github.com”>
* chore: add deprecation warning
* chore: add deprecation message, version and collection
* chore: add changelog fragment
* docs: add deprecation info
* fix: max line length and whitespace
* fix continuation line under-indented
* Update changelogs/fragments/3451-gitlab-group-member-deprecate-name-and-path.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/source_control/gitlab/gitlab_group_members.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* fix: return correct group id
match only full_path or name
* chore: add changelog fragment
* fix: indentation multiple of four
* refactor: use two loops
* fix: typo of group id
* fix: changelog fragment
* Fix diff mode when updating authentication flow with keycloak_authentication module
* Update documentation of create_or_update_executions function (return tuple instead of dict)
* Fix: Update requirement when new exex created
* Add changelog fragment
* Update changelogs/fragments/3330-bugfix-keycloak-authentication-flow-requirements-not-set-correctly.yml.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update changelogs/fragments/3330-bugfix-keycloak-authentication-flow-requirements-not-set-correctly.yml.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* Edit requirement of sublow
Co-authored-by: Felix Fontein <felix@fontein.de>
* Adding capability to specify ehlo hostname
* Fixing default for ehlohost
the CI did not like "None" as default in the documentation,
judging from the rest of the definitions omitting that seems to be right
* Update plugins/modules/notification/mail.py
Proper spelling in documentation
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
* Adding Changelog Fragment
* Update changelogs/fragments/3425-mail_add_configurable_ehlo_hostname.yml
Proper phrasing in changelog
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
* integration-test for ehlohost parameter
* proper description, increased async-time
changed body of ehlohost-mail to reflect ehlohost
increased async from 30 to 45 as CI failed because
smtp was already down.
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
* do not ignore volatile - fix#2466
* remove unnecessary checks
* fix ansible-tests sanity
* fix access to the option: ignore_volatile_options
* add fragment
* fix quotation marks error
* fix review findings
* fix sanity error
* fix description - in yaml examples use true not True
comment out the deprecate message
* remove "default=True" at ignore_volatile_options
fix spelling
* fix sanity error that ignore_volatile_options have no default value
* undo changes. add defaut value and remove keyword at dict.get()
* fix sanity error
* small spelling fixes
* change text for fragment
* Fix description sentence.
Co-authored-by: Frank Dornheim <“dornheim@posteo.de@users.noreply.github.com”>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Added redis_set module
Added redis_set module and unit tests for the new module.
Applied suggested changes and removed redis_del in favor of state
option.
Also added redis utility class that handles connection.
* Typos, added version and BOTMETA
* Fixed import error checking
* Fixed Unit tests
* Docfix and return consistency
* Added Check Mode
* Update plugins/modules/database/misc/redis_data.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* kernel_blacklist - revamped the module
* file default and setting "lines" when file does not exist
* added changelog fragment
* added change in arg_spec to the documentation block
* Update plugins/modules/system/kernel_blacklist.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/system/kernel_blacklist.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/system/kernel_blacklist.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* fixed: initialize self.pattern before self.var.is_blacklisted
* File writing recoded
* added try/finally for the file
* multiple changes:
- fixed case when last line of the existing file has no newline char
- added integration tests
* PR: integration test now using remote_tmp_dir
Co-authored-by: Felix Fontein <felix@fontein.de>
If package installation has an error after the package is install (e.g.
when running tags), then there will be output on stderr and the fallback
regex will match; however, since pkg_add exited non-zero, changed is
never added as a key to the dictionary. As a result the code at the end
of main that checks if anything has changed raises a KeyError.
* pythonific!! no camel cases, bitte
* simplified iface attributes parsing
* some improvements, passing tests
* simplified set_interface_option()
* further simplifications
* remove unreachable stmt
* pythonified a file open
* added changelog fragment
* adjustment per PR
* PR: fixed the auto- case
* PR: added testcase and chglog frag for the misleading change report
* extra line removed
* integration is not destructive
* Adding "Id" to the add user function
Some implementations of Redfish (e.g. the one in Cisco's CIMC) seem to require the id of the new user for account creation.
I'm not that firm with Python but lines 982 and 983 should fix it.
* changed indention
* created changelog fragment
* Update changelogs/fragments/3343-redfish_utils-addUser-userId.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update change type
* supplemented the description of the ID parameter
* Update plugins/modules/remote_management/redfish/redfish_command.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Add opentelemetry callback plugin
* Apply suggestions from code review
Co-authored-by: Felix Fontein <felix@fontein.de>
* Formatting (text), booleans and renamed env variables
* This should be done in a future release
* Remove insecure in favour of the OTEL env variable. Add descriptions
* Use OpenTelemetrySource
* Move generate_distributed_traces
* Move update_span_data and set_span_attribute
* Move finish_task
* Move start_task
* Refactor to support UTs
* Add first UT
* Fix codestyle
* opentelemetry callback entry in the botmeta
* Fix linting
* Fix signature
* Mock methods
* Use MagicMock
* Mock the methods
* UT for transform_to_boolean_or_default
* Fix linting
* Set test data
* Mock _time_ns
* Exclude tests for python <= 3.6
* Remove obsoleted setup task type configuration
* Remove unused docs
* Apply suggestions from code review
Co-authored-by: Felix Fontein <felix@fontein.de>
* Fix docs
* unrequired logic that was originally took from https://github.com/ansible/ansible/blob/devel/lib/ansible/plugins/callback/junit.py\#L226
* Use raise_from for the required dependencies
* Fix linting
* Add requirements for the UTs
* add missing dependency for the opentelemetry plugin in the UTs
* Add ANSIBLE_ prefix for the ansible specific options
* Add more context in the docs and remove duplicated docs
* As suggested in the code review
* Verify if the OTEL env variables for the endpoint were set
* Fix docs typo
* Fix linting
* Revert "Fix linting"
This reverts commit 3a54c827c5472553a6baf5598bc76a0f63f020c1.
* Revert "Verify if the OTEL env variables for the endpoint were set"
This reverts commit cab9d8648899c28c0345745690c4ec7a41f7e680.
* Remove console_output as suggested
* Apply suggestions from code review
Co-authored-by: flowerysong <junk+github@flowerysong.com>
* Delegate the definition of OTEL_EXPORTER_OTLP_INSECURE to the user
* Move definitions above, close to the class that uses them
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: flowerysong <junk+github@flowerysong.com>
* Added token parameter for AccessTokenAuthorizer
Parameters username and password are not required anymore because of
this.
* Added changelog fragments
* Apply suggestions from code review
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
* token authorizer is prioritized
token authorizer is prioritized when token parameter is set
* Apply suggestions from code review
Co-authored-by: Felix Fontein <felix@fontein.de>
* domain optional if token not provided
* Updated examples
- `base_url` is required everywhere
- examples for user, name + domain authorization included
- token authorization included
* Update 3327-tss-token-authorization.yml
* Apply suggestions from code review
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Initial commit
* Adding changelog fragment
* Further refactoring
* Fixing bad copy/paste and adding task for psutil >= 5.7.0 install
* Inverting psutil installation order to reduce duplication
* Optimizing regex compilation
* Adds few more gitlab group options
* Update plugins/modules/source_control/gitlab/gitlab_group.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Removes default for new string options
* Removes default from argument_spec
* Adds changelog fragment
* Update plugins/modules/source_control/gitlab/gitlab_group.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/source_control/gitlab/gitlab_group.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/source_control/gitlab/gitlab_group.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Maik Schueller <maik.schueller@sap.com>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Added redis_data_info module
Added:
- redis_data_info module and suggested 'exists' return flag.
- module_utils for redis with a base class that handles database connections.
- inhereited unit tests and added some new ones for the exit flag
* Docfix and sanity
* typo
* Suggested doc changes and ssl option
* TLS and validate_certs fix
* Set support_check_mode for info plugin
* Docfix and import errors
* Redis versioning Fix
* version bump and append fixes
* django_manage - fix fixures
* docs formatting adjustments
* param apps also in need of splitting
* oops, the splitted version was not being properly added to the command args
* added changelog fragment
* check for None
* moving to shlex.split()
* Update changelogs/fragments/3334-django_manage-split-params.yaml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Some vendors surround header etag with quotes, which need to be cleaned before sending a patch
* Minor change fragment
* Add etag strip quote option
* Rebase
* Cleanup fragment
* Apply suggestions from code review
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/remote_management/redfish/redfish_command.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Description update
* Update plugins/modules/remote_management/redfish/redfish_config.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Kyle Williams <kyle.williams@thetradedesk.com>
Co-authored-by: Felix Fontein <felix@fontein.de>
* - fix to issue 3041
- add func to work with user lists
- add func to set members to the ones give
* Added version_added to new parameter
* fixed elements in definition of gitlab_users nad wrong import in gitlab_users
* linter issues fixed
* added list elelements to argument_spec
* More whitspeaces for the linter
* Update plugins/modules/source_control/gitlab/gitlab_group_members.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* adapted changelog
* removed bugfix (other PR), changes due to review
* changed input handling according to review
* Fixed test findings
* Added list of dict to allow for specifying user/access_level tuples
* corrected doc section
* fixed parameter definitions
* removed strange additional import
* Update changelogs/fragments/3041-gitlab_x_members_fix_and_enhancement.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/source_control/gitlab/gitlab_group_members.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/source_control/gitlab/gitlab_project_members.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/source_control/gitlab/gitlab_group_members.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/source_control/gitlab/gitlab_group_members.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* fixed required if
* Update plugins/modules/source_control/gitlab/gitlab_group_members.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Added suggestions from PR
* fixed identation problem
* Update plugins/modules/source_control/gitlab/gitlab_group_members.py
Co-authored-by: Zainab Alsaffar <za5775@rit.edu>
* Update plugins/modules/source_control/gitlab/gitlab_group_members.py
Co-authored-by: Zainab Alsaffar <za5775@rit.edu>
* Update plugins/modules/source_control/gitlab/gitlab_group_members.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/source_control/gitlab/gitlab_group_members.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Recommended changes from discussionst
* Fixed issues from automatic tests
* added missing metaclass due to test finding
* added integration tests
* Update plugins/modules/source_control/gitlab/gitlab_group_members.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/source_control/gitlab/gitlab_group_members.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/source_control/gitlab/gitlab_group_members.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/source_control/gitlab/gitlab_group_members.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/source_control/gitlab/gitlab_group_members.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/source_control/gitlab/gitlab_group_members.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/source_control/gitlab/gitlab_group_members.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* fixed optimization for only one user
* Reverted gitlab_project_members to original version - changes will be done in a separate branch
* added examples for new functionality
* - fixed changelog after reverting gitlab_project_memebers
- fully reverted gitlab_project_members
* Fixed error handling: when single users are not updateable in bulk mode the exception should not stop the code flow but document the problem in the result.
* Better error handling
* on error give username, not gitlab numeric userid
* Fixed broken check_mode
* Update plugins/modules/source_control/gitlab/gitlab_group_members.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Change from review
Co-authored-by: Max Bidlingmaier <Max-Florian.Bidlingmaier@sap.com>
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Zainab Alsaffar <za5775@rit.edu>
* zfs.py: treated received properties as local and added diff mode support
If you use "zfs set" to explicitly set ZFS properties, they are marked as from source "local". If ZFS properties are implicitly set by using "zfs send" and "zfs receive", for example as part of a template based installation, they are marked as from source "received". But as there is no technical difference between both types of them, the “received” ZFS properties should also be considered “local”. Otherwise Ansible would detect changes, which aren’t actual changes. Therefore I changed line 202/207 to reflect this.
For us it’s quite important, that Ansible modules support the diff mode in order to qualify changes. Therefore I added some code lines to address this.
* added changelog fragment for PR #502
* fixed typos in changelog fragment for PR #502
* minor changes in changelog fragment for PR #502
* added link to pull request in changelog fragment for PR #502
* extended the diff data structure to always include the name of the zfs filesystem
* added code to also maintain the diff data structure after a change
* reverted back some code lines for better code readability
* added an extra dict in the diff data structure to hold the zfs properties
* udm_dns_record: Fix handling of PTR records (#3244)
Before, it was not possible to manage PTR records in Univention DNS,
due to broken zone lookups and improper used parameters of the object.
This patch fixes the PTR handling, allowing both v4 and v6 entries.
* udm_dns_record: [doc] add changelog fragment
* udm_dns_record: [fix] validation errors
* udm_dns_record: import ipaddress module conditionally (#3244)
* udm_dns_record: fix sanity check error, improve doc (#3244)
* udm_dns_record: Improve changes to meet community standards (#3244)
* snap - improved error handling
* added changelog fragment
* removed experiments left overs
* rolled back the smaller list of params for commands other than install
* Fixed incorrect VMID: cloning to an existing VM
During a cloning operation, if the destination VM already exists the VMID returned is not correct.
The VMID returned should be that of the destination VM and not that of the source VM (consistent with line 1230).
A playbook that relies on the returned VMID, for example, to perform other operations on the destination VM, will not work properly if it is unexpectedly interrupted.
* Add files via upload
* moved 3266-vmid-existing-target-clone.yml to changelogs/fragments/
replaced line separator CRLF -> LF
* storing vmid list in variable to avoid multiple API calls
* Linode Inventory can use full IP data from APIv4
- The Linode dynamic inventory module does not currently distinguish
between private and public IP addresses even though the Linode APIv4
contains this information. This change keeps the current behavior as
the default and adds an option to set `ip_style: api`. When set, this
option allows administrators to differentiate between private, public,
slaac, local_link, and pool network addresses providing a more nuanced
and granular view of the remote host's network information.
Signed-off-by: Kellin <kellin@retromud.org>
* Review - amend changelog details
- Adds a link back to this pull request
- Uses markdown styles for easier to read publishing in the changelogs
- Amends the wording style to match the existing changelog styles
Co-authored-by: Felix Fontein <felix@fontein.de>
* Add scope to example invocation
- Adds the `community.general` scope to invocation example
Co-authored-by: Felix Fontein <felix@fontein.de>
* Convert lamda to list comprehension
- Change the ip type filter from a lambda to a list comprehension
Co-authored-by: Felix Fontein <felix@fontein.de>
* Add punctuation to description sentence
- Adds a period to the end of the description sentence
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
If `api_token` is not set and config file exists, it will try to fetch
the value from the activated profile and fallback on default.
This should not break existing workflows.
* Add option for retry_servfail
cf. https://dnspython.readthedocs.io/en/latest/resolver-class.html#dns.resolver.Resolver.retry_servfail
Setting this option to `True` allows for the possibility of the lookup plugin to retry and thereby recover from potentially transient lookup failures, which would otherwise cause the task or play to bail with an unrecoverable exception.
* Create 3247-retry_servfail-for-dig
* documentation for `retry_servfail` option
* Rename 3247-retry_servfail-for-dig to 3247-retry_servfail-for-dig.yaml
* fix whitespace
* Update plugins/lookup/dig.py
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
* Update plugins/lookup/dig.py
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
* rm try/except block
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
* nmcli: Disallow Wi-Fi options not supported by nmcli
By querying nmcli directly
* Added changelog fragment
* Added tests
* Simplify `get_available_options()`
* Update changelogs/fragments/3141-disallow-options-unsupported-by-nmcli.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* Remove redundant `802-11-wireless` settings from test show outputs
* Update `mocked_wireless_create(mocker)`
* Update plugins/modules/net_tools/nmcli.py
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
* Address comment re. creating function & use nmcli naming conventions
I.E. `setting`.`property` = `value`
```
nmcli> help set
set [<setting>.<prop> <value>] :: set property value
This command sets property value.
Example: nmcli> set con.id My connection
```
* Added `ignore_unsupported_suboptions` option & improved `wifi(_sec)` doc
* Corrected pep8 issues
```
ERROR: Found 2 pep8 issue(s) which need to be resolved:
ERROR: plugins/modules/net_tools/nmcli.py:342:161: E501: line too long
(236 > 160 characters)
ERROR: plugins/modules/net_tools/nmcli.py:359:161: E501: line too long
(237 > 160 characters)
```
* Fixed remaining sanity check issues and added even more docs
* No need to split Note
* Update plugins/modules/net_tools/nmcli.py
3.5.0 has already been released.
Co-authored-by: Felix Fontein <felix@fontein.de>
* Followed uniformity guideline for format macros from Ansible's dev guide
* Addressed comment
https://github.com/ansible-collections/community.general/pull/3141#discussion_r689098383
* Documentation cleanup continuation
* Replace `NM_SETTING_*`s having a description with their numeric value
* Splitting up long paragraphs.
Also removed `wifi`.`seen-bssids` as it "`is only meant for reading`"
* Addressed remaining comments and clarified `wake-on-lan` note
* Update plugins/modules/net_tools/nmcli.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/net_tools/nmcli.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/net_tools/nmcli.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/net_tools/nmcli.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Finishing addressing documentation comments.
* Update plugins/modules/net_tools/nmcli.py
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
* Update plugins/modules/net_tools/nmcli.py
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
* Update nmcli.py
* Added wifi-related `list` type options to `settings_type` method
* Moved `edit_commands` `execution` logic into its own method
* Move `unsupported_property` deletion into `main` function
* Missing `.items()`
* Resolved missing proper `nmcli conn edit` arguments
* Resolve pylint issue `dangerous-default-value`
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
Co-authored-by: David Hummel <dhummel@Fingerling>
* redfish_info: Include Status property for GetChassisThermals
Include Status property for Thermal objects when querying Thermal properties
via GetChassisThermals command.
FIXES#3232
* fixup for rename of fragments file
* Update changelogs/fragments/3233-include-thermal-sensor-status-via-redfish_info.yaml
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
* Added fix for bug report in issue #3192
* Added changelog fragment
* Typo fix
* Added Importerror to exception - as req by linters
* Moved the conditional import statement to try/except block
* module_helper - implemented classmethod to start the module plus minor change
* rolled back the __changed__() method
* added changelog fragment
* Update plugins/module_utils/mh/base.py
Co-authored-by: Sviatoslav Sydorenko <wk.cvs.github@sydorenko.org.ua>
* no capt Piccards allowed in the base class
* removed extra piccards
Co-authored-by: Sviatoslav Sydorenko <wk.cvs.github@sydorenko.org.ua>
- Fix a typo in the Linode inventory plugin unit tests
- Fix some style issues in descriptions where punctuation was missing
Signed-off-by: Kellin <kellin@retromud.org>
* slack - minor refactoring and pythonifying
* added changelog fragment
* Update changelogs/fragments/3205-slack-minor-refactor.yaml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* refactor to vdo
* adjusted if condition
* added changelog fragment
* Update plugins/modules/system/vdo.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* adjustements per the PR
* more occurrences of bool compared with yes or no
* Update changelogs/fragments/3191-vdo-refactor.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Add ipv4 example to linode inventory
* Update plugins/inventory/linode.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* ini_file - prepare for fixing #273
- restructure tests
- fix error message call: fail_json() takes 1 positional argument but 2 were given
* ini_file - multiple values for one option (#273)
- add module option 'exclusive' (boolean) for the abbility to add
single option=value entries without overwriting existing options
with the same name but different values
- add abbility to define multiple options with the same name but
different values
* ini_file - add more tests for ini_file
* ini_file - fix sanity tests
* apply suggested changes:
- rename 03-regressions.yml to 03-encoding.yml
- fix typos
- fix documentation
* apply suggested changes:
- test errors also for result is failed
* apply suggested changes:
- make state=absent also work with module option exclusive
- add more tests for state=absent and module option exclusive
* fix sanity test:
- 02-values.yml:251:9: hyphens: too many spaces after hyphen
* apply proposed changes
* apply proposed changes from review
- adjust version_added to 3.6.0
- small syntax change in changelog fragment
* Initial Commit
* Comparing with tar file checksums rather than tar header checksums
* Added changelog fragment
* Revert "Comparing with tar file checksums rather than tar header checksums"
This reverts commit bed4b17107.
* Restricting idempotency tests by format
* Applying review suggestions
* zypper: support transactional-updates
- Check if transactional updates are in use by checking for the
existence of /var/lib/misc/transactional-update.state
- Prefix zypper-commands with /sbin/transactional-update --continue --drop-if-no-change --quiet run
if this is the case
fixesansible-collections/community.general#3159
* re-add get_bin_path for executables
* fix typo
* Support older version of psutil (RHEL7 and RHEL6)
The psutil python module is a true mess, they changed the API twice. The function arguments, as well as the objects that are returned.
The documentation does not make it clear which version supports what so the safest implementation is this waterfall approach.
A better approach would be to inspect the returned information, rather than trust a version, but that would not be any more efficient.
In the end it is better to have something that at least works out-of-the-box on all platforms than something that requires custom updates to system packages before it works as expected. Especially for something as basic as `pids`.
* A little bit more concise
* Apply suggestions from code review
* Add changelog fragment.
Co-authored-by: Felix Fontein <felix@fontein.de>
When a package name contains special characters (e.g. "g++"), they are
interpreted as part of the regexp.
This can lead to a crash with an error in the python re module, for
instance with "g++":
sre_constants.error: multiple repeat
Fix this by escaping the package name.
Co-authored-by: Baptiste Jonglez <git@bitsofnetworks.org>
* nmcli: use `stdin` for setting private `wifi_sec` options
I.E.:
* `802-11-wireless-security.leap-password`
* `802-11-wireless-security.psk`
* `802-11-wireless-security.wep-key0`
* `802-11-wireless-security.wep-key1`
* `802-11-wireless-security.wep-key2`
* `802-11-wireless-security.wep-key3`
* Changelog fragement formatting.
* Update changelogs/fragments/3160-pass-wifi-secrets-via-stdin-to-nmcli-module.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* Make `wifi_sec_secret_options()` into a constant
* Minor cleanup
`'set ' + key + ' ' + value`
=>
`'set %s %s' % (key, value)`
* Change `casing`
* Change `WIFI_SEC_SECRET_OPTIONS` from `list` to `tuple`
* Update `edit_connection()` to not reset `edit_commands`
It will just re`set` them if `edit_connection()` is called more than
once.
* Do not call `edit_connection()` if `connection_update(*)` fails
* Fixed `pep8` issue `E713` in tests
`test for membership should be 'not in'`
* Simplify `create_connection()`/`modify_connection()` logic
* `WIFI_SEC_SECRET_OPTIONS`=>`SECRET_OPTIONS`, options are prefixed
* Moved `if key in self.SECRET_OPTIONS` into `if value is not None` check
We don't need to do anything is the value is None
Co-authored-by: Felix Fontein <felix@fontein.de>
* Fixed `wifi_sec` option changes are not detected
Also updated `docs` URL and formatting to match that of the `wifi`
option
* Removed extraneous `appends` to `cmd` in `connection_update`
These really should have only been added to `connection_options` whose
return values get `extended` onto `cmd`
* pkgin: display stdout and stderr in case the error occurs
* Update changelogs/fragments/pkgin-output-after-error.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Updated the plugin to reflect breaking changes introduced in the underlying SDK v1.0.0 update.
* Added Changelog fragment
* Updates based on feedback/review
* Added newline to pass CI
* Added whitepace for linter
* Update changelogs/fragments/3139-tss-lookup-plugin-update-to-make-compatible-with-sdk-v1.yml
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
* For #3134
Expose BootOverrideMode parameter to redfish_command to allow setting by user during run.
* Fix trailing whitespace
* Add changelog fragment to contribution.
* Update changelogs/fragments/3135-add-redfish_command-bootoverridemode.yaml
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/remote_management/redfish/redfish_command.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/remote_management/redfish/redfish_command.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/remote_management/redfish/redfish_command.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/remote_management/redfish/redfish_command.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update changelogs/fragments/3135-add-redfish_command-bootoverridemode.yaml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* added utf-8 markers to all .py files in plugins/filter
* added utf-8 markers to all .py files in plugins/inventory
* added utf-8 markers to all .py files in plugins/lookup
* added utf-8 markers to all .py files in plugins/{action,cache,callback}
* added utf-8 markers to all .py files in plugins/connection
* added utf-8 markers to all .py files in plugins/doc_fragments
* report power state of host
* Modify sample information
* add changelog fragment
* apply feedback from github community
* apply feedback
Co-authored-by: Yvan E. Watchman <git@yvanwatchman.eu>
* multiple improvements
* added changelog fragment
* comment and name in int test files
* added notes to the documentation
* removed the extraneous changelog frag
* Update plugins/modules/web_infrastructure/apache2_module.py
* adjusted doc text for sanity check
* Update plugins/modules/web_infrastructure/apache2_module.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* removed extraneous dependency in integration test
Co-authored-by: Felix Fontein <felix@fontein.de>
* initial commit
* multiple changes:
- added a proper process_command_output()
- adjusted the output_params fields (and removed other *_params fields)
* added RETURN documentation, plus few adjustments
* fixed sanity tests
* updated BOTMETA.yml
* further adjustments
* integration tests - first commit
* removed unused files from integration test
* added role installation tests
* removed extraneous cmd line option
* added requirement-file installation tests
* adjusted documentation and output variable names
* fixed integration test
* Update plugins/modules/packaging/language/ansible_galaxy_install.py
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
* Update plugins/modules/packaging/language/ansible_galaxy_install.py
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
* Update plugins/modules/packaging/language/ansible_galaxy_install.py
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
* Update plugins/modules/packaging/language/ansible_galaxy_install.py
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
* Update plugins/modules/packaging/language/ansible_galaxy_install.py
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
* Update plugins/modules/packaging/language/ansible_galaxy_install.py
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
* Update plugins/modules/packaging/language/ansible_galaxy_install.py
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
* Update plugins/modules/packaging/language/ansible_galaxy_install.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update tests/integration/targets/ansible_galaxy_install/aliases
Co-authored-by: Felix Fontein <felix@fontein.de>
* Per comments in the PR:
- fixed missing paths case
- fixed install parsing (regexp) for ansible-galaxy collection install in v2.10
* changed the collection installed in test to something unlikely to come embedded in Ansible itself
* fixed logic for Ansible 2.9
* kill trailing whitespace
* changed default language from C.UTF-8 to en_US.UTF-8
* updated c.g version
* skipping test in python 2.6, as ansible-galaxy no longer supports it in devel
* Multiple changes:
- improved docs on ansible 2.9 and python 2.6
- removed method __changed__() - unnecessary since tracking changes in the ansible29_change var
- renamed methods __run29__() and __run210plus__() to __setup29__() and __setup210plus__(), respectively
- ansible 2.9 warning for requirements_file only when type is "both"
* sanity fix
* further adjustments
* removed extraneous doc
* changed method to determine remote ansible version
* do not allow type=both in Ansible 2.9
* Update plugins/modules/packaging/language/ansible_galaxy_install.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/packaging/language/ansible_galaxy_install.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* changed method names per PR
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
Co-authored-by: Felix Fontein <felix@fontein.de>
* minor refactoring in gunicorn module
* added changelog fragment
* reworked the gunicorn bin path part of the code, per PR
* Update changelogs/fragments/3092-gunicorn-refactor.yaml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* import certificate+key bundle from pkcs12
* fix typo/syntax
* fix variable name
* fix passwords order and improve error handling
* add changelog fragment
* enter keystore pass only once if keystore already exists, and twice at creation
* nomalize tests
- Replace `command` tasks by dedicated (community.crypto) modules.
- Add spaces around jinja2 variable names.
- Call modules by their FQCNs.
* Add tests to check keystore has a private key
fix tests for RedHat/CentOS < 8 (run openssl command as an alternative to
`openssl_pkcs12` module)
* Clone sucess should return new vm id, not id from cloned vm.
* add changelog fragment
* Update changelogs/fragments/3034-promox-kvm-return-new-id.yaml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Yvan E. Watchman <git@yvanwatchman.eu>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Deprecate get state in favour of the xfconf_info module
* added changelog fragment
* added comments in ignore files
* Update changelogs/fragments/3049-xfconf-deprecate-get.yaml
bummer, forgot that
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/system/xfconf.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/system/xfconf.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Initial commit
* Fixing units and path joins
* Ensuring paths are consistently ordered
* Adding changelog fragment
* Using os.path.join to ensure trailing slashes are present
* optimizing use of root in add_targets
* Applying initial review suggestions
* Don't know why this works but it does.
Plugin was crashing on this line on Python 3.9.2 deployed on qemu image with debian bullseye. It doesn't crash anymore.
* Create 3052_proxmox_inventory_plugin.yml
* Update changelogs/fragments/3052_proxmox_inventory_plugin.yml
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
* Added module for creating protected branches
* Applied some changes due to comments and added a test that currently fails
* Changing no_access to nobody due to comment on PR
* Changing the description to clarify it a bit more
* Added working tests for module 'gitlab_protected_branch'
* Fixing lint issues
* Added doc that minimum of v2.3.0 is needed to work correctly
* Fixed the requirements notation
* Check the version of the module
* Hopefully fixed the tests by skipping it when lower version of 2.3.0 is installed
* Fix lint issues
* Applying changes due to comments in PR
* Remove commented code
* Removing the trailing dot ...
Co-authored-by: jenkins-x-bot <jenkins-x@googlegroups.com>
Co-authored-by: Werner Dijkerman <iam@werner-dijkerman.nl>
* added feature flag to control whether CmdMixin adds rc, out and err to the result of the module
* added changelog fragment
* changed from a global flag to parameters in run_command
* updated changelog
* fixed brainless copy-paste of yours truly
* extend support for FreeBSD
* Check if FS exists with `fstyp` if `blkid` fails to find FS signature
(fix a potential data loss)
* Add support for FreeBSD special devices (character devices).
* Add support for FreeBSD native fstype (UFS).
* Update DOCUMENTATION accordingly.
* add/update integration tests
* Add tests for `fstype=ufs` on FreeBSD.
* Run `remove_fs` tests (`state=absent`) on FreeBSD.
* Run `overwrite_another_fs` tests on FreeBSD.
* add a changelog fragment
* fix indentation
* restrict new tests to regular files
* fix typo
* fix searching of providersize (block count)
* add '-y' option to growfs command
* remove references to versions older than the collection itself
* bump version adding new feats to 3.4.0
* reformat *collection* and *version added* for better DOCUMENTATION parsing
* skip tests for FreeBSD < 12.2
* run tests for FreeBSD >= 12.2
* re-enable tests for FreeBSD < 12.2 and give it a try with group1
* util-linux not available on FreeBSD < 12.2
* Add authentication_flow_binding_overrides option to the keycloak_client module
* Add changelog fragment
* Update changelogs/fragments/2949-add_authentication-flow-binding_keycloak-client.yml
Co-authored-by: Amin Vakil <info@aminvakil.com>
* Update plugins/modules/identity/keycloak/keycloak_client.py
Co-authored-by: Amin Vakil <info@aminvakil.com>
* Update plugins/modules/identity/keycloak/keycloak_client.py
Co-authored-by: Amin Vakil <info@aminvakil.com>
* Add unit test authentication_flow_binding_overrides feature on keycloak_client module
Co-authored-by: Amin Vakil <info@aminvakil.com>
* Remove necessities on password or token.
* Upper case letter -> Lower case letter
Co-authored-by: Amin Vakil <info@aminvakil.com>
* Documentation update.
* C -> I
Co-authored-by: Amin Vakil <info@aminvakil.com>
* fixed param order
* added changelog fragment
* rebased and uncommented tests per PR
* added /snap link in RH
* typo in tests
* Update tests/integration/targets/snap/tasks/default.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* Try some snap fixes.
* Fix logic.
* Try to run tests privileged.
* Prevent failure on rc != 0.
* Fix formatting.
* Revert "Try to run tests privileged."
This reverts commit 77ca91f502.
* Try to run tests on RHEL instead.
* Make sure that snapd is running.
* Add changelog fragment.
* str -> to_native.
* Make sure that installed binary is actually found.
* Add check mode tests.
* Mention #2835 in changelog fragment.
* Fix bug when 2 identical executions in same auth flow
* Add changelog fragment
* Fix unit tests
* Update changelogs/fragments/2904-fix-bug-when-2-identical-executions-in-same-auth-flow.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* uncoupled updates_url from plugin download urls
added new parameters: versioned_plugins_url, latest_plugins_url
* parameters updates_url, latest_plugins_url and versioned_plugins_url changed type to list of strings to implement fallback URLs usage
added type conversion if they are string (backward compatibility)
* removed type conversion this is handled by ansible validation
fix: dont fail if first url fails
* added fallback: if installation from plugin manager fails, try downloading the plugin manually
* fixed test failures
* PEP8 indent fix
* changelog fragment
* added debug outputs for new url fallback behavior
* added version_added in description for latest_plugins_url
Co-authored-by: Felix Fontein <felix@fontein.de>
* added version_added in description for versioned_plugins_url
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update changelogs/fragments/1334-jenkins-plugin-fallback-urls.yaml
Co-authored-by: Felix Fontein <felix@fontein.de>
* improve backwards-compatibility
add optional arg to allow custom update-center.json targets
* pep8 fixes
* fix inconsistency in argument documentation
* Apply suggestions from code review
Co-authored-by: Amin Vakil <info@aminvakil.com>
* add unit tests
* fix pep8
* Apply suggestions from code review
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Amin Vakil <info@aminvakil.com>
* [nmcli] add connection.slave-type for teamed devices
* [nmcli] add fragment with changes for #2827
* [nmcli] add tests for network team
* [nmcli] fix testing
Co-authored-by: Oriol MULA VALLS <oriol.mula@lxp.lu>
* pacman: Descriptive state documentation
* Update plugins/modules/packaging/os/pacman.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Martin Rys <martin@rys.pw>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Check idempotency on yum_versionlock
* Lock packages wildcard
* fix formatting
Co-authored-by: Felix Fontein <felix@fontein.de>
* Fix formatting in asserts
* little closer but not still there
* Import fnmatch
* Change check_mode logic
* Add check_mode for add
* Add changelog
Co-authored-by: Felix Fontein <felix@fontein.de>
* Add ability to create project under a user
* Add changelog
* Add username option
* Update changelogs/fragments/2824-gitlab_project-project-under-user.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* Make group and username mutually exclusive
Co-authored-by: Felix Fontein <felix@fontein.de>
* fix keystore type; update unit tests
* add changelog fragment
* document new param 'keystore_type'
* add keystore_type support (backward compatible)
* check JKS format with magic bytes
* update integration tests
* revert first changes in unit tests
* update changelog fragment
* fix magic bytes for python2/python3
* fix integration tests (irrelevant check_mode)
* fix unit test (keystore removed before failure => changed=true)
* fix typo
* fix spelling
* shorten a branch
* mock is_jks_or_pkcs12
* fix function path in unit tests
* Apply suggestions from code review (spelling)
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
* rename a method (module + unit tests)
* move ArgumentSpec class content to main()
* refactor create() to not loose existing keystore in case of error
* update unit tests
* add integration test (error handling)
* fix keystore backup cleanup
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
* Add ability to create project under a user
* Add changelog
* Change minor_changes in changelog
As suggested in this comment https://github.com/ansible-collections/community.general/pull/2824#discussion_r653411741
* Fix user's namespace
* Delete changelog
* Add changelog
* Fix changelog
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Amin Vakil <info@aminvakil.com>
* Change user_group_id to namespace_group_id
Co-authored-by: Felix Fontein <felix@fontein.de>
* Change to namespace_id
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Amin Vakil <info@aminvakil.com>
* added check_destroy
This is based on the work done in PR 398. Authors from that PR:
Co-authored-by: effaamponsah <kamponsah.amponsah@gmail.com>
Co-authored-by: m-yosefpor
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Andrew Klychkov <aaklychkov@mail.ru>
* added changelog fragment
* Update plugins/modules/cloud/misc/terraform.py
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
* Update changelogs/fragments/2874-terraform-check-destroy.yml
Co-authored-by: Amin Vakil <info@aminvakil.com>
Co-authored-by: effaamponsah <kamponsah.amponsah@gmail.com>
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Andrew Klychkov <aaklychkov@mail.ru>
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
Co-authored-by: Amin Vakil <info@aminvakil.com>
* Initial Commit
* Adding changelog fragment
* Ensured params are present during verbose output and enhanced check_mode
* Making specific to builtins
* Removing unneccessary external call
* Acutal bugfix
* Allow keycloak_group.py to take token as parameter for the authentification
Refactor get_token to pass module.params + Documentation
Fix unit test and add new one for token as param
Fix identation
Update plugins/modules/identity/keycloak/keycloak_client.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Update plugins/modules/identity/keycloak/keycloak_clienttemplate.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Allow keycloak_group.py to take token as parameter for the authentification
Refactor get_token to pass module.params + Documentation
* Update plugins/module_utils/identity/keycloak/keycloak.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Check if base_url is None before to check format
Update plugins/module_utils/identity/keycloak/keycloak.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Update plugins/modules/identity/keycloak/keycloak_client.py
Co-authored-by: Amin Vakil <info@aminvakil.com>
Update plugins/modules/identity/keycloak/keycloak_clienttemplate.py
Co-authored-by: Amin Vakil <info@aminvakil.com>
Switch to modern syntax for the documentation (e.g. community.general.keycloak_client)
Update keycloak_client.py
Update keycloak_clienttemplate.py
Add keycloak_authentication module to manage authentication
Minor fixex
Fix indent
* Update plugins/modules/identity/keycloak/keycloak_authentication.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Update plugins/modules/identity/keycloak/keycloak_authentication.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Update plugins/modules/identity/keycloak/keycloak_authentication.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Update plugins/modules/identity/keycloak/keycloak_authentication.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Update plugins/modules/identity/keycloak/keycloak_authentication.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Removing variable ANSIBLE_METADATA from beginning of file
Minor fix
Refactoring create_or_update_executions :add change_execution_priority function
Refactoring create_or_update_executions :add create_execution function
Refactoring create_or_update_executions: add create_subflow
Refactoring create_or_update_executions: add update_authentication_executions function
Minor fix
* Using FQCN for the examples
Minor fix
Update plugins/module_utils/identity/keycloak/keycloak.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Update plugins/module_utils/identity/keycloak/keycloak.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Update plugins/module_utils/identity/keycloak/keycloak.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Update plugins/module_utils/identity/keycloak/keycloak.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Update plugins/module_utils/identity/keycloak/keycloak.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Update plugins/module_utils/identity/keycloak/keycloak.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/identity/keycloak/keycloak_authentication.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Update plugins/modules/identity/keycloak/keycloak_authentication.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Refactoring: rename isDictEquals into is_dict_equals
Refactoring: rename variable as authentication_flow
Refactoring: rename variable as new_name
Refactoring: rename variable as flow_list
Refactoring: rename variable as new_flow
Refactoring: changing construction of dict newAuthenticationRepresentation and renaming as new_auth_repr
Minor fix
* Refactoring: rename variables with correct Python syntax (auth_repr, exec_repr)
Move create_or_update_executions function from keycloak.py to keycloak_authentication.py
Minor fix
Remove mock_create_or_update_executions not needed anymore
Fix unit test
Update plugins/module_utils/identity/keycloak/keycloak.py
is_dict_equals function return True if value1 empty
Update plugins/module_utils/identity/keycloak/keycloak.py
Co-authored-by: Alexei Znamensky <103110+russoz@users.noreply.github.com>
Rename is_dict_equal as is_struct_included and rename params as struct1 and struct2
Rename variables according to Python naming conventions
Refactoring: add find_exec_in_executions function in keycloak_authentication to remove code duplication
typo
Add blank line
Add required parameter, either creds or token
Typo
try/except only surround for loop containing struct2[key]
Add sub-options to meta_args
assigment of result['changed'] after if-elif-else block
Fix CI error: parameter-type-not-in-doc
Fix unit test: none value excluded from comparison
Minor fix
Simplify is_struct_included function
Replace 'type(..) is' by isinstance(..)
Remove redundant required=True and redundant parenthesis
Add check_mode, check if value is None (None value added by argument spec checker)
Apply suggestions from code review
Update plugins/modules/identity/keycloak/keycloak_authentication.py
* Update plugins/modules/identity/keycloak/keycloak_authentication.py
* Add index paramter to configure the priority order of the execution
* Minor fix: authenticationConfig dict instead of str
Co-authored-by: Felix Fontein <felix@fontein.de>
* Initial Commit
* Further refinement
* Fixing archive name distortion for single file zips
* Applying initial review suggestions
* Updating path value for single target
* Adding test case for single target zip archiving
* Fixing integration for RHEL/FreeBSD on ansible 2.x
* Fixing integration second attempt
* Adding changelog fragment
* Updating changelog fragment
* Support stop a running Jenkins build. Meanwhile enrich document content and test cases.
* Fix the inconsistencies regarding the function name.
* Submit the changelog and fix a PEP8 issue.
* Remedy whitespace related PEP8 issues.
* Implement the idempotent test case for the stop build function.
* Make sure it returns proper changed status when we stop a build repeatedly.
* Fix incorrect usages on comparison with True or False and incorrect usages on validating the changed status.
* In this mocking situation, adjust the mock return value and test case to perform unit testing.
* Implement JenkinsMockIdempotent() to mock return value in idempotent test cases.
* Fix issues reported by CI.
* Refactor the code to avoid CI exception and remove get_build_status() from mock function as they should not be there.
* Update plugins/modules/web_infrastructure/jenkins_build.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* gem_module: Add bindir option
This option allows to specify directory to install executables, e.g.
`/home/user/bin` or `/home/user/.local/bin`. This comes especially handy
when used with user_install option as the default path of executables is
not in PATH.
* Update changelogs/fragments/gem_module_add_bindir_option.yml
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
* gem_module: Integration tests for bindir option
* gem_module: Update Integration tests for bindir option
* gem_module: Update Integration tests for bindir option
Make sure gist is not installed system-wide prior the tests
* Revert "gem_module: Update Integration tests for bindir option"
This reverts commit 04eec6db27.
* Do not check "install_gem_result is changed" for ansible develop on openSUSE
* Revert "Do not check "install_gem_result is changed" for ansible develop on openSUSE"
This reverts commit 48ecb27889.
* gem_module: Use --norc to avoid surprises
Run install and uninstall actions with `--norc`. This way ansible has
more control over the way gems are installed.
* Revert "gem_module: Use --norc to avoid surprises"
This reverts commit 66f40bcfe6.
* gem_module: bindir - Ignore openSUSE Leap
* Update plugins/modules/packaging/language/gem.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* gem_module: Use --norc to avoid surprises
Run install and uninstall actions with `--norc` when supported (rubygems >= 2.5.2).
This way ansible has more control over the way gems are installed.
* Try distutils.version instead of packaging
* ver is an list, not string
* ver is not list either but tuple
* Update changelogs/fragments/gem_module_add_bindir_option.yml
Co-authored-by: Alexei Znamensky <103110+russoz@users.noreply.github.com>
* ver can be None (when can this happen?)
* gem: Add norc option
* Apply suggestions from code review
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/packaging/language/gem.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Use tuples to compare versions
* Apply suggestions from code review
Co-authored-by: Amin Vakil <info@aminvakil.com>
* Update plugins/modules/packaging/language/gem.py
Co-authored-by: Amin Vakil <info@aminvakil.com>
* lost norc option check is back
* Move handling norc option to separate function
* cosmetic
* fix for the previos commit
* Apply suggestions from code review
Co-authored-by: Felix Fontein <felix@fontein.de>
* Cache result of get_rubygems_version
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Alexei Znamensky <103110+russoz@users.noreply.github.com>
Co-authored-by: Amin Vakil <info@aminvakil.com>
ZFS-backed block devices may contain just the bare device name and
not have extra options like `,size=foo`, `,format=qcow2` etc. This
breaks an assumption in existing regex (which expects a comma).
Support such device strings and add a couple of testcases to validate.
* npm - fix updating version specific modules
if a version specific module is used, the comparison will be used with the version and not only by name
* Update plugins/modules/packaging/language/npm.py
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
* Update changelogs/fragments/2830-npm-version-update.yml
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
* Update changelogs/fragments/2830-npm-version-update.yml
Co-authored-by: Amin Vakil <info@aminvakil.com>
* Update changelogs/fragments/2830-npm-version-update.yml
Co-authored-by: Amin Vakil <info@aminvakil.com>
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
Co-authored-by: Amin Vakil <info@aminvakil.com>
* fix sudorule_add_allow_command_group
fix sudorule_add_allow_command_group is not working on freeIPA 4.8.7 at least, sudorule_add_allow_command should be used instead with item sudocmdgroup
* Added changelog fragment
* reviving flatpack PR
* added changelog fragment
* adjusted integration tests per PR
* adjusted examples to use the full name of the module
* Use new local artifacts.
* Re-add StrictVersion import.
* Try to clean up PR.
* ...
* Use original name in installed/not installed list.
* More fixes.
* Work around flatpak bug.
* Fix bug I introduced.
Co-authored-by: Felix Fontein <felix@fontein.de>
pamd module does not handle or modify authselect profiles
which are basically template files for authselect. The autheselect
generates pam.d files from these profiles.
Fixes: #1954
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Add server_prefix and server_port as supported arguments for the redhat_subscription module.
* Adjust the argument sequence in the test case to be consistent with the original code in line 364 in redhat_subscription.py and add the changelog fragment.
* Grammatical changes such as adding full stops and using 'an HTTP' instead of 'a HTTP'.
* Commit the suggested changelog update.
Co-authored-by: Amin Vakil <info@aminvakil.com>
* Fix typo.
Co-authored-by: Amin Vakil <info@aminvakil.com>
Co-authored-by: Amin Vakil <info@aminvakil.com>
* Updated example section for ``variables``
* Added link about token generation
* Misc changes in doc
Fixes: #467
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Similar version restrictions than flatpak_remote tests.
* ...
* Try to work around missing dependencies.
* Revert "Try to work around missing dependencies."
This reverts commit 66a4e38566.
* Add changelog.
* App8 -> App2; make sure that there are two apps App1 and App2.
* Fix forgotten variabe.
* Remove test notices.
* Seems like flatpak no longer supports file:// URLs.
The tests would need to be rewritten to offer the URL via http:// instead.
* Try local HTTP server for URL tests.
* ...
* Lint, add status check.
* Add boilerplate.
* Add 'ps aux'.
* Surrender to -f.
* Work around apparent flatpak bug.
* Fix YAML.
* Improve condition.
* Make sure test reruns behave better.
* zypper_repository: Check idempotency on adding repo with releasever
* Name required when adding non-repo files.
* Initial try to fix releasever
* Replace re.sub with .replace
* name releaseverrepo releaseverrepo
* Change to ansible_distribution_version for removing repo
* improve asserts format
* add changelog
* Fix changelog formatting
Co-authored-by: Felix Fontein <felix@fontein.de>
* improve command used for retrieving releasever variable
Co-authored-by: Felix Fontein <felix@fontein.de>
* add basearch replace
* Add basearch to changelog fragment
* Check for releasever and basearch only when they are there
Co-authored-by: Felix Fontein <felix@fontein.de>
* also uses LC_ALL to force language
* adjusted test_xfconf and test_cpanm
* added changelog fragment
* Update changelogs/fragments/2731-mh-cmd-locale.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* adjusted chglog frag per PR
Co-authored-by: Felix Fontein <felix@fontein.de>
* fixed validation-modules for plugins/modules/remote_management/stacki/stacki_host.py
* sanity fix
* added changelog fragment
* extra fix to the documentation
* Update plugins/modules/remote_management/stacki/stacki_host.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/remote_management/stacki/stacki_host.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* rollback params
Co-authored-by: Felix Fontein <felix@fontein.de>
* fix call to async_status (-> action plugin)
* add changelog fragment
* Apply suggestions from code review
Co-authored-by: Felix Fontein <felix@fontein.de>
* rename a local variable for readability
Co-authored-by: Felix Fontein <felix@fontein.de>
* fix: include portal and port for logged on check
* refactor: remove extra space
* fix: allow None portal and port on target_loggedon test
* add auto_portal_startup argument
* fix: change param name for automatic_portal
* add changelog fragment
* refactor: Update changelogs/fragments/2684-open_iscsi-single-target-multiple-portal-overrides.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* add version added info to auto_portal_startup arg
* add example for auto_portal_startup
* fix: remove alias for auto_portal form arg_spec as well
* refactor: elaborate in fragment changelogs
Elaborate change
Co-authored-by: Amin Vakil <info@aminvakil.com>
* open_iscsi: elaborate changelog fragment
* Update plugins/modules/system/open_iscsi.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Amin Vakil <info@aminvakil.com>
* Wire token param into consul_api #2124
* Update changelogs/fragments/2124-consul_kv-pass-token.yml
Co-authored-by: Alexei Znamensky <103110+russoz@users.noreply.github.com>
* #2124 renamed release fragment to match pr, removed parse_params.
* putting look back in, do some linting #2124
* try more linting
* linting
* try overwriting defaults in parse_params with get_option vals, instead of removing that function completely.
* Revert "back to start, from 2nd approach: allow keyword arguments via parse_params for compatibility."
This reverts commit 748be8e366.
* Revert " linting"
This reverts commit 1d57374c3e.
* Revert " try more linting"
This reverts commit 91c8d06e6a.
* Revert "putting look back in, do some linting #2124"
This reverts commit 87eeec7180.
* Revert " #2124 renamed release fragment to match pr, removed parse_params."
This reverts commit d2869b2f22.
* Revert "Update changelogs/fragments/2124-consul_kv-pass-token.yml"
This reverts commit c50b1cf9d4.
* Revert "Wire token param into consul_api #2124"
This reverts commit b60b6433a8.
* minimal chnages for this PR relative to current upstream.
* superfluous newline in changlog fragment.
Co-authored-by: Alexei Znamensky <103110+russoz@users.noreply.github.com>
* Reduce stormssh searches based on host
Due to the stormssh searches in the whole config values, we need to reduce the search results based on the full matching of the hosts
* Removed whitespaces in the blank line
* Added changelog fragment and tests for the fix.
* Added newline at the end of the changelog fragment
* Added newline at the end of the tests
* Fixed bug with name in tests
* Changed assertion for the existing host
* Update changelogs/fragments/2568-ssh_config-reduce-stormssh-searches-based-on-host.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* Adjusted tests
* New line at the end of the tests
Co-authored-by: Anton Nikolaev <anikolaev@apple.com>
Co-authored-by: Felix Fontein <felix@fontein.de>
* add module pacman_key
* add symlink and fix documentation for pacman_key
* documentation fix for pacman_key
* improve logic around user input
* Update plugins/modules/packaging/os/pacman_key.py
Co-authored-by: Andrew Klychkov <aaklychkov@mail.ru>
* Update plugins/modules/packaging/os/pacman_key.py
Co-authored-by: Andrew Klychkov <aaklychkov@mail.ru>
* Update plugins/modules/packaging/os/pacman_key.py
Co-authored-by: Andrew Klychkov <aaklychkov@mail.ru>
* Update plugins/modules/packaging/os/pacman_key.py
Co-authored-by: Andrew Klychkov <aaklychkov@mail.ru>
* Update plugins/modules/packaging/os/pacman_key.py
Co-authored-by: Andrew Klychkov <aaklychkov@mail.ru>
* Update plugins/modules/packaging/os/pacman_key.py
Co-authored-by: Andrew Klychkov <aaklychkov@mail.ru>
* Update plugins/modules/packaging/os/pacman_key.py
Co-authored-by: Andrew Klychkov <aaklychkov@mail.ru>
* Update plugins/modules/packaging/os/pacman_key.py
Co-authored-by: Andrew Klychkov <aaklychkov@mail.ru>
* Update plugins/modules/packaging/os/pacman_key.py
Co-authored-by: Andrew Klychkov <aaklychkov@mail.ru>
* Update plugins/modules/packaging/os/pacman_key.py
Co-authored-by: Andrew Klychkov <aaklychkov@mail.ru>
* Improve parameter checking
required_one_of=[] is neat.
Co-authored-by: Alexei Znamensky
* Revert "Improve parameter checking"
This reverts commit 044b0cbc85.
* Simplify a bunch of code.
* fix typos pointed out by yan12125
* replaced manual checks with required-if invocation
* added default keyring to documentation
* some initial tests
* updated metadata
* refactored to make sanity tests pass
* refactor to make sanity tests pass ... part deux
* refactor: simplify run_command invocations
* test: cover check-mode and some normal operation
* docs: fix grammatical errors
* rip out fingerprint code
a full length (40 characters) key ID is equivalent to the fingerprint.
* refactor tests, add a couple more
* test: added testcase for method: data
* Update plugins/modules/packaging/os/pacman_key.py
Co-authored-by: Alexei Znamensky <103110+russoz@users.noreply.github.com>
* docs: correct yaml boolean type
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Andrew Klychkov <aaklychkov@mail.ru>
Co-authored-by: Alexei Znamensky <103110+russoz@users.noreply.github.com>
Co-authored-by: Felix Fontein <felix@fontein.de>
* keycloak_realm.py: Fix the `ssl_required` parameter according to the API
The `ssl_required` parameter is a string and must be one of 'all',
'external' or 'none'. Passing a bool will make the server return a 500.
* fixup! keycloak_realm.py: Fix the `ssl_required` parameter according to the API
* Update changelogs/fragments/keycloak_realm_ssl_required.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* keycloak_realm.py: Mark 'reset_password_allowed' as no_log=False
This value is not sensitive but Ansible will complain about it otherwise
* fixup! keycloak_realm.py: Mark 'reset_password_allowed' as no_log=False
* Apply all suggestions from code review
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* use get() rather than querying the key directly
* add a changelog fragment
* re-enable CI tests
* Update changelog fragment
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* new
* move link
* Apply suggestions from code review
Co-authored-by: Felix Fontein <felix@fontein.de>
* add more interesting return value in test
* remove unused objects
* removed unneeded function
* extend test output
* Update tests/unit/plugins/modules/database/saphana/test_hana_query.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Rainer Leber <rainer.leber@sva.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* added note in documentation for utf-8 bom
* Update plugins/modules/files/ini_file.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* define POST method for pluginManager api requests
Jenkins makeEnable/makeDisable api requests requires to use POST method
* add changelog fragment
* fix my yoda lang thx to aminvakil
Co-authored-by: Amin Vakil <info@aminvakil.com>
* update changelog fragment
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Amin Vakil <info@aminvakil.com>
Co-authored-by: Felix Fontein <felix@fontein.de>
* rhsm_release: Fix the issue that rhsm_release module considers 8, 7Client and 7Workstation as invalid releases.
* Fix the unit test error: The new release_matcher could pass a wider range of patterns but that would not cause extra issue to the whole module.
* Submit the changelog fragment.
* Update changelogs/fragments/2571-rhsm_release-fix-release_matcher.yaml
Co-authored-by: Amin Vakil <info@aminvakil.com>
Co-authored-by: Amin Vakil <info@aminvakil.com>
* opening file as utf-8-sig
* added changelog fragment
* using io.open()
* Update tests/integration/targets/ini_file/tasks/main.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* fix wrong certificate alias used when importing pkcs12, modify error output, stdout is more relevant than stderr
* add changelog fragment
* fix changelog fragment
* Add comment_visibility parameter for comment operation for jira module
Co-authored-by: felixfontein <felix@fontein.de>
* Update plugins/modules/web_infrastructure/jira.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/web_infrastructure/jira.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* addressed pep8 E711
* Added missing parameter.
* params is not in use anymore.
* It appears other modules are using options, where in documentation they use suboptions. Inconsistancy?
* adjusted indentation
* tweaked suboptions, fixed documentation
* Added fragment
* Update changelogs/fragments/2556-add-comment_visibility-parameter-for-comment-operation-of-jira-module.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/web_infrastructure/jira.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: felixfontein <felix@fontein.de>
* Add 'bin' option to use an alternative pacman binary
* Add changelog entry
* Incorporate recommendations
* Update plugins/modules/packaging/os/pacman.py
* Apply suggestions from code review
Co-authored-by: Felix Fontein <felix@fontein.de>
* refactor initialize_from_null_state()
* Use a more neutral command (iptables -L) to load per-table needed modules.
* fix 'FutureWarning: Possible nested set at position ...' (re.sub)
* fix pylints (module + action plugin)
* unsubscriptable-object
* superfluous-parens
* consider-using-in
* unused-variable
* unused-import
* no-else-break
* cleanup other internal module_args if they exist
* add changelog fragment
* Apply suggestions from code review (changelog fragment)
Co-authored-by: Felix Fontein <felix@fontein.de>
* Remove useless plugin type in changelog fragment
Co-authored-by: Amin Vakil <info@aminvakil.com>
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Amin Vakil <info@aminvakil.com>
* revamp filesystem module to prepare next steps
* pass all commands to module.run_command() as lists
* refactor grow() and grow_cmd() to not need to override them so much
* refactor all existing get_fs_size() overrides to raise a ValueError if
not able to parse command output and return an integer.
* override MKFS_FORCE_FLAGS the same way for all fstypes that require it
* improve documentation of limitations of the module regarding FreeBSD
* fix indentation in DOCUMENTATION
* add/update function/method docstrings
* fix pylint hints
filesystem: refactor integration tests
* Include *reiserfs* and *swap* in tests.
* Fix reiserfs related code and tests accordingly.
* Replace "other fs" (unhandled by this module), from *swap* to *minix*
(both mkswap and mkfs.minix being provided by util-linux).
* Replace *dd* commands by *filesize* dedicated module.
* Use FQCNs and name the tasks.
* Update main tests conditionals.
* add a changelog fragment
* Apply suggestions from code review
Co-authored-by: Felix Fontein <felix@fontein.de>
* declare variables as lists when lists are needed
* fix construction without useless conversion
Co-authored-by: Felix Fontein <felix@fontein.de>
* cmd params now taken from self.vars instead of self.module.params
* added changelog fragment
* Update changelogs/fragments/2517-cmd-params-from-vars.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* influxdb_user: allow creation of first user with auth enabled (#2364)
* handle potential exceptions while parsing influxdb client error
* fix changelog
Co-authored-by: Felix Fontein <felix@fontein.de>
* influxdb_user: use generic exceptions to be compatible with python 2.7
Co-authored-by: Felix Fontein <felix@fontein.de>
instead of whitelisting some subset of known existing permissions, just
allow any string to be used as permissions. this way, any permission
supported by the underlying zfs commands can be used, eg. 'bookmark',
'load-key', 'change-key' and all property permissions, which were
missing from the choices list.
Add ability to ignore error on missing pass file to allow processing the
output further via another filters (mainly the default filter) without
updating the pass file itself.
It also contains the option to create the pass file, like the option
create=true does.
Finally, it also allows to issue a warning only, if the pass file is not
found.
* 1085 updating the hcl whitelist to include all supported options
* Update changelogs/fragments/1085-consul-acl-hcl-whitelist-update.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Dillon Gilmore <dgilmor@rei.com>
Co-authored-by: Felix Fontein <felix@fontein.de>
* minor refactors
* minor refactors in plugins/connection/saltstack.py
* minor refactors in plugins/connection/qubes.py
* minor refactor in plugins/connection/lxc.py
* minor refactors in plugins/connection/chroot.py
* minor refactors in plugins/connection/funcd.py
* minor refactors in plugins/connection/iocage.py
* minor refactors in plugins/connection/jail.py
* added changelog fragment
* Adding cryptography as a backend for OpenSSL operations
* Updating unit tests and adding changelog fragment
* Allowing private key password option when using unprotected key
* Incorporating suggestions from initial review
* Centralizing module exit path
* gitlab_user: add expires_at option
* Add changelog
* Add integration test
* Add expires_at to addSshKeyToUser function
* password is required if state is set to present
* Check expires_at will not be added to a present ssh key
* add documentation about present ssh key
* add expires_at to unit tests
* Improve documentation
Co-authored-by: Felix Fontein <felix@fontein.de>
* Only pass expires_at to api when it is not None
* Emphasize on SSH public key
* Apply felixfontein suggestion
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Add proxmox_nic module
Add proxmox_nic module to manage NIC's on Qemu(KVM) VM's in a Proxmox VE
cluster.
Update proxmox integration tests and add tests for proxmox_nic module.
This partially solves https://github.com/ansible-collections/community.general/issues/1964#issuecomment-790499397
and allows for adding/updating/deleting network interface cards after
creating/cloning a VM.
The proxmox_nic module will keep MAC-addresses the same when updating a
NIC. It only changes when explicitly setting a MAC-address.
* Apply suggestions from code review
Co-authored-by: Felix Fontein <felix@fontein.de>
* Add check_mode and implement review comments
- check_mode added
- some documentation updates
- when MTU is set, check if the model is virtio, else fail
- trunks can now be provided as list of ints instead of vlanid[;vlanid...]
* Make returns on update_nic and delete_nic more readable
Co-authored-by: Felix Fontein <felix@fontein.de>
* Increase readability on update_nic and delete_nic
* Implement check in get_vmid
- get_vmid will now fail when multiple vmid's are returned as proxmox
doesn't guarantee uniqueness
- remove an unused import
- fix a typo in an error message
* Add some error checking to get_vmid
- get_vmid will now return the error message when proxmoxer fails
- get_vmid will return the vmid directly instead of a list of one
- Some minor documentation updates
* Warn instead of fail when setting mtu on unsupported nic
- When setting the MTU on an unsupported NIC model (virtio is the only
supported model) this module will now print a warning instead of
failing.
- Some minor documentation updates.
* Take advantage of proxmox_auth_argument_spec
Make use of proxmox_auth_argument_spec from plugins/module_utils/proxmox.py
This provides some extra environment fallbacks.
* Add blank line to conform with pep8
Co-authored-by: Felix Fontein <felix@fontein.de>
* influxdb_retention_policy: add state option to module argument spec
* influxdb_retention_policy: simplify duration parsing logic (suggested in #2284)
* add changelog
* fix documentation and changelog
* add constants for duration and sgduration validations
* restyle ansible module spec
Co-authored-by: Felix Fontein <felix@fontein.de>
* improve changelog
Co-authored-by: Felix Fontein <felix@fontein.de>
* set changed result in check mode for state absent
* remove required flag in optional module arguments
* influxdb_retention_policy: improve examples readability
Co-authored-by: Felix Fontein <felix@fontein.de>
* nmcli: Remove dead code, 'options' never contains keys from 'param_alias'
* Update changelogs/fragments/2417-nmcli_remove_dead_code.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* first push: add discord module and test for notifications
* fix the yaml docs and edit the result output
* add link
* fix link
* fix docs and remove required=False in argument spec
* add elements specd and more info about embeds
* called str...
* elements for embeds oc.
* fix typo's in description and set checkmode to false
* edit docs and module return
* support checkmode with get method
* fix unit test
* handle exception and add new example for embeds
* quote line
* fix typos
* fix yaml
* break down of module_helper into smaller pieces, keeping compatibility
* removed abc.ABC (py3 only) from code + fixed reference to vars.py
* multiple changes:
- mh.base - moved more functionalities to ModuleHelperBase
- mh.mixins.(cmd, state) - CmdMixin no longer inherits from ModuleHelperBase
- mh.mixins.deps - DependencyMixin now overrides run() method to test dependency
- mh.mixins.vars - created class VarsMixin
- mh.module_helper - moved functions to base class, added VarsMixin
- module_helper - importing AnsibleModule as well, for backward compatibility in test
* removed unnecessary __all__
* make pylint happy
* PR adjustments + bot config + changelog frag
* Update plugins/module_utils/mh/module_helper.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/module_utils/mh/module_helper.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* modified redfish_config and idrac_redfish_config to skip incorrect attributes
Signed-off-by: Trevor Squillario Trevor_Squillario@Dell.com
* modified redfish_utils.py and idrac_redfish_config.py to return empty warning message
* modified redfish_config.py and idrac_redfish_config.py to use module.warn()
* updated changelog fragment for pr 2334
* Add dependent lookup plugin.
* Use correct YAML booleans.
* Began complete rewrite.
* Only match start of error msg.
* Improve tests.
* Work around old Jinja2 versions.
* Fix metadata.
* Fix filter name.
* Avoid incorrectly marking zfs tasks as changed
The zfs module will incorrectly mark certain tasks as having been
changed. For example, if a dataset has a quota of "1G" and the user
changes it to "1024M", the actual quota vale has not changed, but since
the module is doing a simple string comparison between "1G" and "1024M",
it marks the step as "changed".
Instead of trying to handle all the corner cases of zfs (another example
is when the zpool "altroot" property has been set), this change simply
compares the output of "zfs-get" from before and after "zfs-set" is
called
* update changelog format
* Update changelogs/fragments/2454-detect_zfs_changed.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* add note about check_mode
* Update plugins/modules/storage/zfs/zfs.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/storage/zfs/zfs.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* clarify check mode qualifications
* rephrase to avoid hypothetical
Co-authored-by: Felix Fontein <felix@fontein.de>
* fix stackpath_compute validate_config
get the lenght for the client_id / client_secret to validate inventory configuration
* Add changelog fragment.
Co-authored-by: Felix Fontein <felix@fontein.de>
* Small Documentation Example Of Cask Leveraging
- Just a lil' demo showing that we can utilize homebrew/cask/foo syntax
for given name of package to grab associated cask pacakge
Resolves: patch/sml-doc-example-update
* Slight Documentation Example Edit
- adjusting documentation example to provide better info surrounding installing
a given formula from brew via cask
Resolves: patch/sml-doc-example-update
* Small Edits To Make PEP8 Happy
- format code with autopep8 in vs code
Resolves: patch/sml-doc-example-update
* Only Making Small PEP8 Change
- reverting previous mass PEP8 format, focus on trimming whitespace on
doc example entry
Resolves: patch/sml-doc-example-update
* Remove Trailing Whitespace PEP8
- removed trailing whitespace on doc example chunk
Resolves: patch/sml-doc-example-update
* 📝 Document nested node addition with "_" in xml module
Nested node addition using "_" to indicate sub nodes, and attributes are only documented in tests and issues, where is hard to find.
* 🚨 Fix trailing space
* Apply suggestions from code review
Add missing collection prefix for modules.
Co-authored-by: Felix Fontein <felix@fontein.de>
* Add missing comments
* Update xml.py
* Fix linter warnings
Co-authored-by: Felix Fontein <felix@fontein.de>
* nmcli: Compare MAC addresses case insensitively
* Update changelogs/fragments/2416-nmcli_compare_mac_addresses_case_insensitively.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/net_tools/nmcli.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Add mac to TESTCASE_BRIDGE so test_bridge_connection_unchanged covers case sensitive mac address comparison
* Update plugins/modules/net_tools/nmcli.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Convert current_value to uppercase as well in case nmcli changes behaviour
Co-authored-by: Felix Fontein <felix@fontein.de>
* Change stdout to console
* readd stdout, resulting in console
* add changelog
* readd stdout to docs and add a warning when it is used
* version of what???
Co-authored-by: Felix Fontein <felix@fontein.de>
* postpone deprecation in another PR
* remove console option, so it can be backported
* change changelog respectively
* Fix changelog formatting
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Fix#2373
* Changelog fragment for #2373
* Update changelogs/fragments/2373-svr4pkg-fix-typeerror.yml
Co-authored-by: Amin Vakil <info@aminvakil.com>
* Update changelogs/fragments/2373-svr4pkg-fix-typeerror.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Amin Vakil <info@aminvakil.com>
Co-authored-by: Felix Fontein <felix@fontein.de>
The composer module always uses the no-interaction option if it
discovers it _after_ calling "composer help ..." but not on the help
call itself. The lack of this option caused composer to not exit when
called through the ansible module.
The same example command when ran interactively does not prompt for user
interaction and exits immediately. It is therefore currently unknown why
the same command hangs when called through the ansible composer module
or even directly with the command module.
Example command which hangs:
php /usr/local/bin/composer help install --format=json
* fixed elements for many lists
* added changelog fragment
* Removed verbose types in description - still missing formatting and properly documenting dicts
* lxd dynamic inventory and test data
* added ``merge_profile`` parameter to merge configurations from the play to an existing profile
* cosmetic changes
* added ``merge_profile`` parameter to merge configurations from the play to an existing profile
* cosmetic changes
* fix pylint errors
* fix flake8 warnings
* fix pep8 errors without "line to long"
* fix ansible tests
* fix typo
* fix version added
* fix lost of suggestions from felixfontein
* fix filter
fix ansible test errors
* delete test config
* delete 'notes:' and copy content to description
* move testdata
load testdata by path from config
* updated documentation
* fix test data and remove inventory branch
* fix spellings and rename lxd to community.general.lxd
* fix documentation
* remove selftest
* strip example data
* add unit test
* switch to ansible.module_utils.common.dict_transformations
* documentation cleanup
* move lxd_inventory.atd from files to fixtures
* update documentation
move lxd_inventory.atd
* rename self.groups to self dispose
remove dumpdata
* cleanup
* fix unittests
comment out dump_data, it breaks the unit tests
* fix pep8
* Apply suggestions from code review
* Update plugins/inventory/lxd.py
* add test if no groupby is selected
* rename disposed to groupby
remove unused constant
other suggested cleanups
* Use bundled ipaddress instead of own code.
* Update plugins/inventory/lxd.py
* Exceptions should not be eaten.
* Improve error handling for network range/address parsing.
* Fix typo.
* Make network range valid.
* Do not error when groupby is not a dict.
Co-authored-by: Frank Dornheim <“dornheim@posteo.de@users.noreply.github.com”>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Merged changes from old PR
* Added suppurt for -, other adaptations regarding size.
* Implementing +- support for -l
* Added changelog
* Renamed changelog
* Apply suggestions from code review
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Allow keycloak_group.py to take token as parameter for the authentification
* Refactor get_token to pass module.params + Documentation
* Fix unit test and add new one for token as param
* Fix identation
* Update plugins/modules/identity/keycloak/keycloak_client.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/identity/keycloak/keycloak_clienttemplate.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Allow keycloak_group.py to take token as parameter for the authentification
* Refactor get_token to pass module.params + Documentation
* Update plugins/module_utils/identity/keycloak/keycloak.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Check if base_url is None before to check format
* Update plugins/module_utils/identity/keycloak/keycloak.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/identity/keycloak/keycloak_client.py
Co-authored-by: Amin Vakil <info@aminvakil.com>
* Update plugins/modules/identity/keycloak/keycloak_clienttemplate.py
Co-authored-by: Amin Vakil <info@aminvakil.com>
* Switch to modern syntax for the documentation (e.g. community.general.keycloak_client)
* Fix URL_REALMS in keycloak.py
* Update keycloak_client.py
* Update keycloak_clienttemplate.py
* Update plugins/module_utils/identity/keycloak/keycloak.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Amin Vakil <info@aminvakil.com>
* convert string returned by plugin to unicode
* add changelog fragment
* fix changelog format
* fix changelog format yet again
Co-authored-by: Anubhav Chakraborty <anubchak@cisco.com>
* Add plugin_paths parameter to terraform module.
The list `plugin_paths` is used in the init phase of terraform by setting
the `-plugin-dir` command line argument to a path that contains
terraform plugins. When the `-plugin-dir` argument is set, the plugin
discovery and auto-download of terraform is disabled. This is useful when
running terraform in automation environments for testing where the production
endpoints are strictly controlled or on air-gapped networks and you need
to control the versions of plugins available.
* Added `elements: path` to `plugin_paths` parameter documentation in terraform.py
* added changelog fragment
* Update changelogs/fragments/2308-terraform-add-plugin_paths-parameter.yaml
use double back-ticks vice single
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/cloud/misc/terraform.py
Add version added to documentation
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/cloud/misc/terraform.py
Add markup around URL in documentation
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/cloud/misc/terraform.py
remove `required=False` and `default=None` from module argument spec, as that is the default behavior and redundant
Co-authored-by: Amin Vakil <info@aminvakil.com>
* Added directory structure info to documentation and examples sections.
* Update plugins/modules/cloud/misc/terraform.py
grammatical fix
Co-authored-by: Felix Fontein <felix@fontein.de>
* grammar fix to description.
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Amin Vakil <info@aminvakil.com>
* added some cases for unsupported network interface and multi-nic without IP addresses
* added changelog fragment
* lint fixes and added option for ansible_host setting
* added description about the new option
* lint fix too long line
* Update changelogs/fragments/2259-proxmox-multi-nic-and-unsupported.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/inventory/proxmox.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/inventory/proxmox.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/inventory/proxmox.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Added CommandDisabled
* refactored to code and added a test case where an interfaces doesnt have a mac address or is invalid to reset it to 00:00:00:00:00:00
* Update tests/unit/plugins/inventory/test_proxmox.py
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
* Update tests/unit/plugins/inventory/test_proxmox.py
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
* mac-address is set to None instead of 00:00:... when not defined
* changed None to empty string for mac-address
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
* with_filetree: use splitext for compatibility with template
The example code given deploys files with their .j2 extensions intact, which is probably not what you want.
* Explain how templates interact with splitext|first
* Update plugins/lookup/filetree.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Don't encourage setting the mode of symlinks
On ext4, maybe most filesystems, symlinks always have the artificial mode of 0777, and `chmod $mode $symlink` *writes through* the symlink to its target file.
An effect of this is that if you deploy a file and a symlink to it (e.g. this common situation: /etc/nginx/sites-available/default and /etc/nginx/sites-enabled/default -> ../sites-available/default) then `with_filetree` will forever first deploy the file with the right mode, then corrupt its mode to 0777, and every redeploy will see a change to fix, forever in a loop.
Probably `file:` should refuse `mode:` on `state: link`s, but in the meantime, avoid recommending it in `filetree`
* Use `follow: false` instead of just the mode.
This should be more cross-compatible.
https://github.com/ansible-collections/community.general/pull/2285#discussion_r616571873
* Update plugins/lookup/filetree.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Keycloak: add realm management
* Minor fixes
* Review fixes
* Remove sort of list because condition on list cannot be true
* Add exception in fail_json and update test
* Change output for secret and version in comments
* Update copyright
Co-authored-by: Felix Fontein <felix@fontein.de>
* Add missing traceback
* Apply suggestions from code review
* Update plugins/modules/identity/keycloak/keycloak_realm.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Allow keycloak_group.py to take token as parameter for the authentification
* Fix some pep8 issues
* Add changelog fragment
* Refactor get_token to pass module.params + Documentation
* Update plugins/module_utils/identity/keycloak/keycloak.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/module_utils/identity/keycloak/keycloak.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Fix unit test and add new one for token as param
* Fix identation
* Check base_url format also if token is given
* Update plugins/doc_fragments/keycloak.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/identity/keycloak/keycloak_client.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/identity/keycloak/keycloak_clienttemplate.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Allow keycloak_group.py to take token as parameter for the authentification
* Refactor get_token to pass module.params + Documentation
* Update plugins/module_utils/identity/keycloak/keycloak.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/identity/keycloak/keycloak_group.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Check if base_url is None before to check format
* Fix unit test: rename base_url parameter to auth_keycloak_url
* Update plugins/module_utils/identity/keycloak/keycloak.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update changelogs/fragments/2250-allow-keycloak-modules-to-take-token-as-param.yml
Co-authored-by: Amin Vakil <info@aminvakil.com>
* Update plugins/module_utils/identity/keycloak/keycloak.py
Co-authored-by: Amin Vakil <info@aminvakil.com>
* Update plugins/modules/identity/keycloak/keycloak_client.py
Co-authored-by: Amin Vakil <info@aminvakil.com>
* Update plugins/modules/identity/keycloak/keycloak_client.py
Co-authored-by: Amin Vakil <info@aminvakil.com>
* Update plugins/modules/identity/keycloak/keycloak_clienttemplate.py
Co-authored-by: Amin Vakil <info@aminvakil.com>
* Update changelogs/fragments/2250-allow-keycloak-modules-to-take-token-as-param.yml
Co-authored-by: Amin Vakil <info@aminvakil.com>
* Update plugins/module_utils/identity/keycloak/keycloak.py
Co-authored-by: Amin Vakil <info@aminvakil.com>
* Update plugins/modules/identity/keycloak/keycloak_clienttemplate.py
Co-authored-by: Amin Vakil <info@aminvakil.com>
* Update plugins/modules/identity/keycloak/keycloak_group.py
Co-authored-by: Amin Vakil <info@aminvakil.com>
* Update plugins/modules/identity/keycloak/keycloak_group.py
Co-authored-by: Amin Vakil <info@aminvakil.com>
* Switch to modern syntax for the documentation (e.g. community.general.keycloak_client)
* Add check either creds or token as argument of all keyloak_* modules
* Update plugins/modules/identity/keycloak/keycloak_client.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Amin Vakil <info@aminvakil.com>
* nmcli: manual overwrite MAC address for any devices
Don't restrict the ability to manually set the MAC address to the
bridge. NetworkManager is able to set a static MAC address to the
vaste majority of the device types.
* Update changelogs/fragments/2224_nmcli_allow_MAC_overwrite.yaml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* fixed udm_dns_zone
* fixed udm_dns_record
* removed lines from ignore files
* added changelog fragment
* moved the list elements fix to minor_changes
* new module: filesize
* description: create or resize a file, given its size
* with integration tests
* Update plugins/modules/files/filesize.py (version_added)
Co-authored-by: Andrew Klychkov <aaklychkov@mail.ru>
* Update filesize.py (extends_documentation_fragment: use fqcn)
Co-authored-by: Amin Vakil <info@aminvakil.com>
* doc: use strict lowercase booleans (true/false) rather than other variants
* use *raw* type to manage size values
* drop 'miB' unit family
* Apply suggestions from code review
Co-authored-by: Felix Fontein <felix@fontein.de>
* add more details
Co-authored-by: Andrew Klychkov <aaklychkov@mail.ru>
Co-authored-by: Amin Vakil <info@aminvakil.com>
Co-authored-by: Felix Fontein <felix@fontein.de>
* copying from the previous branch
* passing sanity - docs incomplete
* adjusted parameter name
* adjusted unit tests for mode=new
* adjusted integration tests for mode=new
* added 'russoz' to list of maintainers for cpanm
* Update tests/integration/targets/cpanm/tasks/main.yml
* Update tests/integration/targets/cpanm/tasks/main.yml
* ensuring backward compatibility + tests
* added changelog fragment
* version for new parameter and adjusted example
* typo and formatting
* Update plugins/modules/packaging/language/cpanm.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/packaging/language/cpanm.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/packaging/language/cpanm.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* multiple changes
- some fixes from PR
- supporting tests
- integration is no longer unsupported => destructive, should run on
apt- and rpm-based systems only
* only run integration tests in redhat-family > v7 or debian-family
Co-authored-by: Felix Fontein <felix@fontein.de>
* linode_v4: add support for `private_ip` option.
* linode_v4: remove `required` attribute from `private_ip` parameter.
* linode_v4: add changelog fragment.
* linode_v4: add PR link to changelog fragment.
Co-authored-by: Amin Vakil <info@aminvakil.com>
* linode_v4: add the `version_added` attribute to the `private_ip` section of module documentation
Co-authored-by: Felix Fontein <felix@fontein.de>
* linode_v4: improve styling of `private_ip` docs
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Amin Vakil <info@aminvakil.com>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Fix for Terraform 0.15
removed the append of variables in terraform validate because this is deprecated in Terraform 0.15. See: https://github.com/hashicorp/terraform/blob/v0.15/CHANGELOG.md >> The -var and -var-file options are no longer available on terraform validate. These were deprecated and have had no effect since Terraform v0.12
* Create terraform-validate.yaml
* Update and rename terraform-validate.yaml to 2246-terraform-validate.yaml
* Update changelogs/fragments/2246-terraform-validate.yaml
Co-authored-by: Amin Vakil <info@aminvakil.com>
* Update terraform.py
remove `-force` add `-auto-approve` on destroy as described in issue #2247
* Update and rename 2246-terraform-validate.yaml to 2246-terraform.yaml
* Update 2246-terraform.yaml
* add a function which check the used tf version
* add a function which check the used tf version
* Update changelogs/fragments/2246-terraform.yaml
Co-authored-by: Amin Vakil <info@aminvakil.com>
* Update changelogs/fragments/2246-terraform.yaml
Co-authored-by: Amin Vakil <info@aminvakil.com>
* add version return to function
* changed it to pass sanity check
* change variable name
* changed to a more specialized data types
* remove use_unsafe_shell=True
* Update changelogs/fragments/2246-terraform.yaml
Co-authored-by: Felix Fontein <felix@fontein.de>
* add description
* Update changelogs/fragments/2246-terraform.yaml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Amin Vakil <info@aminvakil.com>
Co-authored-by: Rainer Leber <rainer.leber@sva.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* New filters hashids_encode and hashids_decode
* Adding changelog
* Correcting whitespace issue in vars file
* Attempt to fix integration test failures
* Correcting copyright
* Addressing initial review comments
* Updating decoded sequence return from tuple to list
* Correcting capitilization and spelling
* java_keystore: add `certificate_path` and `private_key_path` options
* Update DOCUMENTATION and EXAMPLES accordingly.
* Refactor integration tests to play the same tasks twice.
* Add a changelog fragment (minor_changes).
refactor DOCUMENTATION
* Add useful info for better understanding of what options allow
keystore regeneration on the fly, and what other options lead the
module to fail, if their values change.
* Fix indentation and tenses.
* Add myself as author.
* readability-related stuff + changelog fragment
* Added handling for commas in the agent field for agent configuration
* Removed test statement
* Added changelog fragment
* Fixed spelling on fragment :-)
* fixed cdrom parameter
* fixed networks and custom_params parameters
* fixed disks parameter
* fixed remaining parameters
* removed plugins/modules/cloud/xenserver/xenserver_guest.py from ignore list
* comments from PR
* comments from PR
* more adjustments from the PR
* funcd connection plugin is now usable/loadable
* Update changelogs/fragments/allow_funcd_to_load.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* Add Jira attach operation
Adds the `attach` operation to the `web_infrastructure.jira` module,
which allows a user to attach a file to an issue. The user can supply
either the path to a file, which will be read from storage, or a file
name and content (as bytes).
* Apply suggestions from code review
* Update plugins/modules/web_infrastructure/jira.py
Co-authored-by: Alexei Znamensky <103110+russoz@users.noreply.github.com>
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Alexei Znamensky <103110+russoz@users.noreply.github.com>
* spectrum_model_attrs: Initial commit
* spectrum_model_attrs: sanity check fixes (1)
* Apply suggestions from code review
Co-authored-by: Felix Fontein <felix@fontein.de>
* Apply suggestions from code review:
* Removed ANSIBLE_METADATA.
* List all currently supported names in DOCUMENTATION block.
* Don't escape declarations that are long enough to fit on one
line.
* Apply suggestions from code review:
* YAML bools in DOCUMENTATION block.
* Various DOCUMENTATION block aesthetics.
* RETURN block proper format.
* 'yes' -> True declaration in argument spec.
* import urlencode from python 2 and 3 changed to
six.moves.urllib.quote.
* spectrum_model_attrs: integration test added.
* Update plugins/modules/monitoring/spectrum_model_attrs.py
Co-authored-by: Amin Vakil <info@aminvakil.com>
* Update plugins/modules/monitoring/spectrum_model_attrs.py
Co-authored-by: Amin Vakil <info@aminvakil.com>
* spectrum_model_attrs: lint error fixes.
Co-authored-by: Tyler Gates <tgates@citco.com>
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Amin Vakil <info@aminvakil.com>
* Added agent network interaces fact
* Adding changelog fragment
* More concise looping over interfaces
* Adding unit test case for agent interfaces
* Correcting whitespace issue
* Commented new dummy json returns with corresponding method
* java_keystore - improve error handling and returned results
* set check_rc=False to return results as documented when module fails
* set LANG, LC_ALL and LC_MESSAGES to C to rely keytool output parsing
* fix pylint's `no-else-return` and `unused-variable` hints
* update related unit tests accordingly
* add a changelog fragment
update unit test (remove stdout_lines from returned dict)
fix unit test: failure is now expected when alias does not exist
* Update changelogs/fragments/2183-java_keystore_improve_error_handling.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* fix integration test: overwrite keystore at the same location
Co-authored-by: Felix Fontein <felix@fontein.de>
* Added module for ipa_otpconfig
* Make no_log=False explicit.
* Updated inputs to be int type instead of strings to align to expected inputs. Updated output message
* Add changelog fragment
* Remove changelog fragment as this is a new module
* Update plugins/modules/identity/ipa/ipa_otpconfig.py
Add version_added field to module description.
Co-authored-by: Felix Fontein <felix@fontein.de>
* Updated punctuation in examples
* Add unit test for ipa_otpconfig
* Add ipa_otptoken module with unit test
* Updated documentation in unit test
* Update plugins/modules/identity/ipa/ipa_otpconfig.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/identity/ipa/ipa_otpconfig.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/identity/ipa/ipa_otptoken.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/identity/ipa/ipa_otptoken.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/identity/ipa/ipa_otptoken.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/identity/ipa/ipa_otptoken.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/identity/ipa/ipa_otptoken.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/identity/ipa/ipa_otptoken.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Added some documentation updates to make it conform to ansible standards
* Update plugins/modules/identity/ipa/ipa_otptoken.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Address review comments
Co-authored-by: Chris Costa <chris.costa@compellingtech.com>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Added fields to the ipa_config module: ipadefaultprimarygroup, ipagroupsearchfields, ipahomesrootdir, ipamaxusernamelength, ipapwdexpadvnotify, ipasearchrecordslimit, ipasearchtimelimit, ipauserauthtype, ipausersearchfields
* Fixed typos in documentation spec
* Updated a field that was missing the version_added decoration
* Add changelog fragment
* Update plugins/modules/identity/ipa/ipa_config.py
Cleanup example to be consistent with others.
Co-authored-by: Felix Fontein <felix@fontein.de>
* Cleanup example to be consistent with others.
* Fixed changelog fragment
* Updated punctuation in examples
* Switched some elements to use int instead of str, and fixed duplicated example
* Change type of field for ipauserauthtype to list of str, add support for ipaconfigstring and ipakrbauthzdata
* Update fragment to represent adding support for ipaconfigstring and ipakrbauthzdata
* Update changelogs/fragments/2116-add-fields-to-ipa-config-module.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/identity/ipa/ipa_config.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/identity/ipa/ipa_config.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Address review comments by making inputs into group search and user search fields a list of strings, even though IPA does not treat it as a multiselect field
* Update plugins/modules/identity/ipa/ipa_config.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/identity/ipa/ipa_config.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Chris Costa <chris.costa@compellingtech.com>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Bugfix: PyGithub does not support explicit port in base_url
* Fix unit tests
* Fix unit tests
* Added changelog
* Update changelogs/fragments/2204-github_repo-fix-baseurl_port.yml
Co-authored-by: Alexei Znamensky <103110+russoz@users.noreply.github.com>
Co-authored-by: Alexei Znamensky <103110+russoz@users.noreply.github.com>
* added constructable and added keyed_groups, groups and compose
* Update changelogs/fragments/2162-proxmox-constructable.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* added constructed to extends_documentation_fragment and version_added to all the items
* renamed _apply_rules to _apply_constructable for more clarity
* Update changelogs/fragments/2162-proxmox-constructable.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
