* Network modules to link to network guide
* Make it clear what's deprecated
* enable -> become
* Detail when provider is still needed (eAPI/NX-API)
* Link to specific sections
* rx_rate & tx_rate to link to conditional docs
* Make use of named links in documentation notes
Now that it is possible to name external links, we are making use of
this to make the documentation better.
* Add improvements to ACI documentation
* Disable QA for long line
* Add :menuselection: and :guilabel:
* Improve links on some modules
This creates a way for us to use boto3's data-driven waiter support to use custom waiters where Boto3 hasn't implemented them yet.
The only waiter implemented so far is for VPC Route Tables to check that they exist, and this replaces some custom retry code.
Fixes#35993 - Changes to update_size in commit eb4cc31 made it so
the group dict passed into update_size was not modified. As a result,
the 'replace' call does not see an updated min_size like it previously
did and doesn't pause to wait for any new instances to spin up. Instead,
it moves straight into terminating old instances. Fix is to add batch_size
to min_size when calling wait_for_new_inst.
Fixes#28087 - Make replace_all_instances and replace_instances behave
exactly the same by setting replace_instances = current list of instances
when replace_all_instances used. Root cause of issue was that without lc_check
terminate_batch will terminate all instances passed to it and after updating
the asg size we were querying the asg again for the list of instances - so terminate batch
saw the list including new ones just spun up.
When creating new asg with replace_all_instances: yes and lc_check: false
the instances that are initially created are then subsequently replaced.
This change makes it so replace only occurs if the asg already existed.
Add integration tests for #28087 and #35993.
* Remove default admin_distance and fix the idempotence thereof
Fixes#33290
* Fix tests and use yaml anchors to shorten tests
* Add test for undefined admin_distance
* Read config from `show run` if `show ip static route` fails
* Restore flags to ios.get_config & use get_config where appropriate
[cloud aws_s3] Most modes require `object` parameter, and this is easy to
get wrong (e.g. through confusion with the `dest` parameter). As
it's as easy to enforce, let's do that.
There should no longer be a need for boto documentation - it
just adds significant extra clutter to the guidelines.
AnsibleAWSModule greatly improves the codebase to such an extent
that we should mandate it for new code unless there is a
documented good reason.
* Update doc of AnsibleAWSModule to remove incorrect connect example.
Current example uses aws_connect method which no longer exists. Replace
this with the client and resource methods that do exist.
Also remove try/except block in connect example as guidelines imply that
there aren't connection errors thrown on connection, just when later
sing the connection.
* Update AWS module guidelines to include the AnsibleAWSModule connection methods.
* Add information on integration testing to the AWS module guidelines.
* Add information on common documentation fragments to AWS module
Guidelines.
* Changes as requested on PR.
* Restructure connection section to start with current best practice
* Explain the use of the CI build groups
* Use YAML Anchors for aws credentials example
* Replace guidance on use of test groups with link to aliases file.
This achieves the goal of explaining why this file is necessary without
introducing overhead of keeping documentation up to date when test
groups change.
* Clean up vmware BOTMETA
This removes everything that's already part of the module docs. So
basically the BOTMETA file only extends the information from the module.
* Updated author information and copyright statement
The examples comment said 'Add a line to a file if it does not exist, without passing regexp' which suggests, that the file is being created. But the default for 'create' is false. Thus the example lacked this option.
False assumption that values can not have cyclic dependencies. Fix by
removing dependency on self and look for cycles, if found remove
dependency to get a partial sort done.
* win_lineinfile: fix#33858. Removed conversion from \r\n
* win_lineinfile: added test for #33858
* win_lineinfile: added documentation and more tests for change
* win_lineinfile: fixed wrong hash in testing
older versions of Tower (3.1) don't have a concept of CredentialTypes
(this was introduced in Tower 3.2). This change detects older versions
of pre-3.2 tower-cli that *only* support the deprecated `kind`
attribute.
This commit fixes up the get_config method to match the minimum method
signature as defined by the base class. Without this patch, the
get_config method calls will fail in some cirumstances.
Currently, the module fail with a error saying that --acme-dir is mandatory.
Looking at the commandline:
/usr/sbin/acme-tiny --chain --account-key /srv/letsencrypt/acme_key/acme.key
--csr /srv/letsencrypt/nginx_certs/www.example.org.csr--acme-dir /srv/letsencrypt/webroot",
We can see that the space before --acme-dir is missing.
Fix issues in ValueBuilder used in nso_config and nso_verify so that it
can handle leaf-list in NSO 4.5 and detect identityref types from
unions.
Fail gracefully if a type is not found.
* allows ib_spec attrs to be filtered in update
This change will allow the ib_spec entries to be be filtered on a change
object by setting the update keyword to false. The default value for
update is true. When the update keyword is set to false, the keyed
entry will be removed from the update object before it is sent to the
api endpoint.
fixes#36563
* fix up pep8 issues
This fix adds datastore cluster details about datastore in returning
facts. Updated documentation and tests.
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Decouple config and state check in {network_os }_vlan and { network_os }_vrf modules
Fixes#35567Fixes#34754
`interfaces` option is used for configuration as well as operational state
check. If interface is configured to given vlan or vrf but if
operational state of interface is disabled it results in module failure.
Fix is to decouple same option usage for config and state.
With this fix `interfaces` is used as config option and a new
option named `associated_interfaces` will be used for intent check
for assigned interfaces.
* Fix CI failures
* Fix review comment
* Fixed integration test failure
This PR includes:
- Further cleanup of BOTMETA.yml
- Cleanup of author github handles
- Use of proper booleans
- One-line license statement
- Copyright format statement
- Smaller cleanups
* Add anchors to some guides and all module categories
This is required if we want to use *absolute* :ref: references instead of *relative* :doc: references.
* Update the Cisco ACI Guide reference
* Add `aci_guide` anchor
* Add `network_guide` anchor
* Add category anchor
* Improve readability
* Fix small typo
* Fix types when evaluating interpreter. Fixes#36536
* Rename variables that contain bytes to b_*
* Get rid of to_text() and to_bytes() calls that do nothing (because the
data is already the proper type)
* ACI: Various changes to module documentation and guide
This PR includes:
- We moved the object class information to the notes
- Add version information to guide chapters
- Add generic note to modules with reference to ACI guide
- Reference known issues in aci_rest documentation
- Remove module_utils function docs from modules
- Indicate which parameters are not required for querying all objects
- Added missing RETURN information
* Fix copyright strings
* Remove aci_domain_to_encap_pool.py for v2.5
* More updates
* PEP8 fix
* Improve listings of parameters/return values
* find.py module: Added depth: option to specify how many level deep to traverse directories.
* find.py module: depth: added correct version_added value.
* find.py module: depth: Default value is None.
* Better handling of absent AWS SES identity notification information.
Fixes#36065
aws_ses_identity module now handles the cases where information about
the notification setup for the identity isn't returned by the AWS api.
This seems to happen in an edge case, believed to be eventual
consistency on registering new identities. So this case is treated
as if has been no notification setup for the identity yet.
Also fix 2 flake8 warnings in the module, a missing newline and unused
import.
* Increase the Boto Retries on SES APIs to deal with throttling.
This should address the unstable integration test failing due to
parallel runs in shippable hitting AWS throttling.
* Add retries loading SES details for inclusion in successful response.
There seems to be an eventual consistency behaviour with identity
registration. It's possible to still get no identity back after
registration.
This can cause failures in the shippable builds. This should fix that by
creating a retry of retrieving the identity information after
registration.
A similar retry loop has been added to notification attributes to ensure
this doesn't suffer from the same failure.
* Add missing sleep in get_notification_attributes to avoid busy loop.
This change adds the optional wait_for_state_change argument to the
vmware_guest, vmware_guest_powerstate module, which allows for module
completion to be blocked when using the shutdownguest state until the
VM has reached the poweredoff state.
Fixes: #28498
Signed-off-by: Jim Gu <heming.gu@mercurygate.com>
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Adding support for vApp properties.
* vm specification updated only if changes have to be applied. I.e. subsequent updates with the same data will not trigger changed state
* Auxiliary variables renamed, hope this makes the code more readable
* Integration tests changed - re-adding the same properties test not implemented, but tested on real vCenter deployment
* fixing documentation "version_added" for the feature
* Addressing reviewers comments #2:
* documentation updated with the only meaningful value for "option" attribute - "remove"
* Fixed improperly handled case when user requested "add" operation for existent property
* vApp configuration is updated only with properties that contains changes, not with all properties requested by user
* aci_spvpg: Various fixes to integration tests/modules
This PR includes:
- A fix in module_utils aci.py
- Various fixes in integration tests
* Fix typo
* Add AWSRetry when describing VPCs to help stabilize integration tests
* Add retry on create_tags because it is possible to reach this API call before the VPC is finished creating
* now get_url and other modules default to module temp dir
also fixed 'bare' exception
* allow modules to work with older versions
* updated docs per feedback
* Bug in del(list) logic. Say you have a list of 4 elements a[0-3]
and you have to remove index 1 and 3, if you remove index 1 first
then list is cut short a[0-2] and does not have index 3
Fix: Remove indexes in reverse sorted order e.g. 3 and 1 in above
example so that order of indexes remain preserved even after deleting
fix is to remove indexes in reverse sorted order
* Add test cases for failed case
In short, it enables portage module to emit emerge
command with --jobs and --load-average options
with and without argument.
To emit emerge with such CLI argument without
a value, the user must set the corresponding
module option to 0.
By default, if these arguments are missing from
playbook they are omitted.
Misc changes:
* Use to_native to ensure crosspython compat
* Adjust jobs and LA options to accept 0 as reset
* Add docstring to emerge_packages
* Explicitly note in doc that False will work as 0
PR #36355 by @webknjaz
* If inventory file isn't able to be parsed by aws_ec2, return an empty dict instead of None
* Raise an AnsibleParserError instead
* remove extra lines
* aws_ec2 inventory plugin - fix path matching logic
Unified tmp accidentally removed the containing tmpdir from the list of
files to fix the permissions on when we're becoming a different
unprivileged user. This resulted in a visible bug for script but not
for patch. This is because patch also uploads the module to the same
temporary directory and the uploaded module also ends up calling
fixup_perms2() which includes the temporary directory. So by the time
patch needs to access the temporary patch file, the directory is
appropriately set.
script's breakage was visible because script does not upload a module
(it's akin to raw in this way). Therefore, we only call fixup_perms2()
once in script and so leaving out the tmpdir in script means that the
containing directory never has its permissions set appropriately.
Fixing both because it does not cause an extra round trip for patch so
any speedup would be minimal and it's better to fix the perms as close
as possible to where we know we need it. Otherwise, changes to
seemingly unrelated code later could end up breaking it.
Fixes#36398
This PR includes:
- A fix for a recently introduced issue wrt. error handling
- Added integration tests for provoked errors
- Influence standard return values using aci library for aci_rest
- Add proxy support documentation
- Documentation update related to #34175
* Allow to deactivate authz objects. Currently only after success.
* Making sure cleanup is done even when module fails (except if fetch_url() fails).
* Make deactivate_authzs eat exceptions so that all authzs are deactivated in case of errors.
This fix adds a common API for getting host system managed object
from either cluster name or host system.
Fixes: #36010
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
Remove module from ignore lists and some documentation fix in
digital_ocean_block_storage and digital_ocean module.
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* fix nxos_l3_interface tests as n35 doesn't support ipv6
* add terminal dont-ask to nxos_feature and nxos_lldp
* put interfaces in L2 mode for N35
* fix nxos_feature unit-tests
send_command already performs the to_bytes safely on prompts (checking
for None). Without this check the literal 'None' became a subprompt trigger!
Fixes#35662
* Add eos_command doc with more examples
* More examples using cli and eapi transport
* Example on how to handle json output
* Example on handling result output in wait_for
* Fix typo
This fixes, cloning operation where template or existing VM
does not have network or DVPG. Also, adds some strict type checking in
network parameters.
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
This PR includes:
- Rename 'protocol' parameter to 'url_protocol'
- Add limited integration tests (as we have no public firmware access)
- Add missing examples
ansible-console was calling setup_vault_secrets
twice. Once directly and once via _play_prereqs()
The direct invocation was not setting auto_prompt=False.
However, the direct invocation isn't need at all so
this removes it so only _play_reqs() is used.
That fixes the unrequested vault password
prompting.
Fixes#33027
Start using this to construct shade OpenStack Cloud objects in a
consistent manner. This will let us centralize things like dealing with
password arguments and whatnot. It also allows us to introduce the
ability to pass a fully formed config dict directly to the module.
Migrate all OpenStack modules to use openstack_cloud_from_module.
Have it return the shade library since it's responsible for
importing shade and shade is needed for the exceptions.
Only pull specific OpenStack arguments for the constructor
Rather than passing **module.params to the shade constructor, pull out
only the values that make sense. This should prevent the issues with
module parameters stepping on shade parameters.
Replace module.params.pop with module.params.get
We don't need to pop these anymore since the shade constructor is now
using opt-in values.
Using real urls is ungood. Use example.com domains. Also, get rid of the
antiquated port numbers.
When ACI modules are being used for querying MOs, we should not return
the previous state, as there is no previous state, there's only the
current state.
This impacts a lot of tests that were used to testing the current state
as 'previous'.
* fix loop_control templating
- properly template ALL properites for loop_control
- loop_control inherits from base, it should not, but needs validate/attribute functionality
fixes#24719
* add export option
* added 'export mode' to ansible-inventory
this optimizes the output for exporting inventory vs representing the 'ansible view'
fixes#30877
* added group priority when needed
We identified an incompleteness to parameter dependencies that affects
querying all domain-related objects.
This PR also includes:
- Improvements to integration tests
- Add missing vm_provider types
- Fix examples
This relates to #36131
* adding support for loopback interface
currently the loopback interface lo is not supported with vyos_l3_interface, this commit fixes that. Right now there is a limit of loopback interfaces to just lo, if you want more interfaces you need to use a dummy interface https://wiki.vyos.net/wiki/Dummy_interfaces
* fixing spacing as per pep8 test
fixing issues for sanity test
lib/ansible/modules/network/vyos/vyos_l3_interface.py:120:15: E111 indentation is not a multiple of four
lib/ansible/modules/network/vyos/vyos_l3_interface.py:122:15: E111 indentation is not a multiple of four
lib/ansible/modules/network/vyos/vyos_l3_interface.py:126:19: E111 indentation is not a multiple of four
lib/ansible/modules/network/vyos/vyos_l3_interface.py:128:19: E111 indentation is not a multiple of four
lib/ansible/modules/network/vyos/vyos_l3_interface.py:131:19: E111 indentation is not a multiple of four
lib/ansible/modules/network/vyos/vyos_l3_interface.py:133:19: E111 indentation is not a multiple of four
lib/ansible/modules/network/vyos/vyos_l3_interface.py:137:15: E111 indentation is not a multiple of four
lib/ansible/modules/network/vyos/vyos_l3_interface.py:140:15: E111 indentation is not a multiple of four
lib/ansible/modules/network/vyos/vyos_l3_interface.py:145:15: E111 indentation is not a multiple of four
lib/ansible/modules/network/vyos/vyos_l3_interface.py:148:15: E111 indentation is not a multiple of four
* ugh, missed on spacing issue
* getting rid of continuation lines, the CI system does not like it
This PR includes:
- A fix to the module where domain_type without domain caused havoc
- A fix to the integration tests when querying all binding objects
- Improvements to integration tests
Since we pass information directly to ACI, we sometimes get error messages back to the user that require some additional information or context.
This PR includes:
- Changes to the default error output so the error is easier to find
when searching in e.g. Google
- 3 specific error messages that we have encountered and has confused
our users before
The error message as it was confused me when the value was 'enabled' and
there was also a module parameter named 'enabled'.
enabled is not a valid boolean. Valid booleans include: yes, on, 1, true, ...
So by clearly describing it as a value, the confusion would have been
avoided.
The value 'enabled' is not a valid boolean. Valid booleans include: yes, on, 1, true, ...
* Added metrics_collection management to ec2_asg module to switch ASG metrics on and off.
* Fixed typo in documentation of ec2_asg module
* Removed extra blank line in ec2_asg.py
* Docs fixes for ec2_asg module
* Added integration test for ec2_asg metrics flag
* Trying different syntax for ec2_asg test
* Fix vrf parsing in eos_vrf and eos_eapi module
Fixes#30250
Fix logic to parse vrf when interface value in `show vrf`
command output spans on multiple lines
* Add idempotent test case
* Revert "commented out check tests (#35788)"
This reverts commit 3df2561405.
* `discard_changes()` now uses `exit discard`
instead of just `discard`. Also a slight tweak to avoid a second `exit` after
`exit discard`
This fix adds an additional check if there is no snapshot available
in VM. `rootSnapshotList` is None, if no snapshot is taken.
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* hardcoded API profiles in azure_rm_common
* changed azure_rm_securitygroup module to use api_profiles, dynamic models, kwargs on all SDK methods
* changed azure_rm_containerinstance module to use api_profiles, dynamic models, kwargs on all SDK methods
* fixed polling performance issue in azure_rm_securitygroup (default poll interval was 30s)
* Stabilize ec2_vpc_route_table
Wait for route table to be present before attempting to use it
Sleep before getting the final state of the route table in case modifications are incomplete
* Conditionally wait if changes were made
* Simplify logic
This PR includes:
- Fixes related to the recent merge of #31637 and #34537
- A generic fix for a reference for assignment issue
- Fixes to aci.boolean() in order to catch exception
This PR includes:
- payload output on failure, when requested
- add additional kwargs to aci.exit_json()
We may want to enable some of this debug output by default on failure ?
* Exclude parent when copying included task to avoid memory issues. Fixes#35796
* Simplify implicit block squashing to pre-group, instead of post re-parenting
Implement the `v2_playbook_on_handler_task_start()' method in the json
callback plugin to correctly include handlers in the results.
This fixes a bug where the last task in the results returned by
json callback would be wrong if an unconditional handler was triggered,
since the result of that handler would overwrite the result of the last
task.
Signed-off-by: Alex Tsitsimpis <alextsi@arrikto.com>
* Initial (re)implementation of dimensiondata_vlan module.
This module was rewritten because the original implementation was imperative rather than declarative (which is the preferred style, and consistent with our other modules).
Credit for the original module implementation goes to Aimon Bustardo (@aimonb).
* Remove unused imports.
* Improve error message and documentation around expansion of a VLAN's private IPv4 network.
* Split message string over 2 lines.
* Add check_mode support to dimensiondata_vlan module.
ansible/ansible#21218
* Fix errors / warnings reported by Ansible sanity tests.
ansible/ansible#21218
* Remove 'metadata_version' key from documentation.
ansible/ansible#21218
* Return changed=True when changes would be made.
ansible/ansible#21218
* add protocol mapper dict argument spec, documentation for protocol mappers, and documentation for attributes
* reformat docs to stay in line length limit
* better formatting/highlighting for docs
* ooops
copy currently fails if you specify a destination without any directory
component. This is because we take the dirname of the destination for
some processing and no dirname causes issues.
This corrects that by prepending "./" if there is no directory component
in dest.
* basic: allow one or more when param list having choices
* add unit tests
* optimize a bit
* re-add get_exception import
* a number of existing modules expect to be able to get it from basic.py
* Fixing eos_config save option. Was removed when deprecated. Fixing other deprecation documentation. Adding unit tests.
* Fixing removed_in_version for force.
* First bit of fixing temporary to have one source of truth
* Fix pep8
* Remove explicit make_tmp_path() in copy
The copy action plugin sets TRANSFER_FILES=True so it does not need to
set the temporary directory explicitly; the base class's run() method
will do that for us.
* Fix for calling a module's run when a shell has already created a temp path.
* Remember to inform the rest of the world when tempdir is removed
* New strategy for how to warn on passing tmp
Now we just warn when calling the parent class run() early. If the
module does a late call to the parent run() and doesn't make use of the
temporary directory, then we don't check for the possibility that the
user mistakenly is sending tmp in. If we truly deprecate this (rather
than ignoring it forever) then we might want to switch back to checking
for someone passing a value in as tmp.
* Remove tmp parameter from _execute_module as well
* Port all action plugins to not send tmp explicitly
This is now handled inside of _execute_module via the
_connection._shell.tempdir attribute.
Also update warnings and docs to tell people to set the attribute
instead of using _execute_module's tmp parameter.
* Always set local tempdir variable
* [git] Fix fetching branch of shallow clone
* Use absolute file:// paths to make sure git uses shallow clones
* Improve tests
* Fix sanity errors
* Match style according to other (depth) tests
* Improve tests
Now they will fail without the fix of this PR
AWS (and Boto3) supports VPN TunnelOption keys to be specified for VPNs. Specifically (at least at the moment), the options for 'TunnelInsideCidr' (str) and 'PreSharedKey' (str) are particularly noteworthy. One or both may be specified within a 'dict' object (max 2 dicts). AWS defaults shall apply in absence of said parameters.
this was causing issues with keep remote files as the 'local cleanup' would trump the setting.
it will revert back to using the 'remote path' setti.ng for 'localhost' actions.
fixes#35724
* Added firewall_policy, load_balancer, and monitoring_policy cloud modules for oneandone provider.
* Updated OneAndOneResources class and argument specs for monitoring policy and load balancer.
* Addressed ansible-test sanity pep8 and validate-modules errors.
* Added oneandone_public_ip cloud module for oneandone cloud provider. Removed extra modules to adhere to one module per PR.
* Added firewall_policy, load_balancer, and monitoring_policy cloud modules for oneandone provider.
* Updated OneAndOneResources class and argument specs for monitoring policy and load balancer.
* Addressed ansible-test sanity pep8 and validate-modules errors.
* Added firewall_policy, load_balancer, and monitoring_policy cloud modules for oneandone provider.
* Updated OneAndOneResources class and argument specs for monitoring policy and load balancer.
* Addressed ansible-test sanity pep8 and validate-modules errors.
* Added oneandone_private_network cloud module for oneandone cloud provider. Removed extra modules to adhere to one module per PR.
* Updated check mode scenario for remove members, using proper wait_for method in remove_network, renamed private_network_id argument to private_network.
* Fixing validate-modules issue - Documented datacenter.
* Added oneandone_private_network cloud module for oneandone cloud provider. Removed extra modules to adhere to one module per PR.
* Added firewall_policy, load_balancer, and monitoring_policy cloud modules for oneandone provider.
* Updated OneAndOneResources class and argument specs for monitoring policy and load balancer.
* Addressed ansible-test sanity pep8 and validate-modules errors.
* Removed extra modules to adhere to one module per PR.
* Added firewall_policy, load_balancer, and monitoring_policy cloud modules for oneandone provider.
* Updated OneAndOneResources class and argument specs for monitoring policy and load balancer.
* Addressed ansible-test sanity pep8 and validate-modules errors.
* Removed extra modules to adhere to one module per PR.
* New module - elb_target
* Work to add deregister functionality
* Add jurajseffer work on waiting for status change
* List the set of statuses as a choices list
* default target_status_timeout is 60
* Add 'unavailable' as a target status choice per API docs
* Add support to remove targets that are in unused state
* add support for availability zone selection
Fix deregistering targets from used target groups
Fix waiting for unused state for targets that have started deregistering
This fixes a bug when parent's local vars where not available in nested
includes. The bug can only be seen with jinja>=2.9 which changes
how the variable scopes work.
Fixes#34886
* add interfacce_type to absent required if...not sure how this would work without it
* move fex requirement to required_if
* Fix incorrect documentation about port_channels
This patch fixes repeated attempts that the module would make to
re-create an API object. The change stores a copy for later lookup
instead. This prevents uncontrolled tokens from being created.
* Wildcard imports should be taken care of. Enable the pylint check for them
* Remove wildcard import code-smell test as we're now checking via pylint
* Add unused-wildcard-import as ignored in our compat code.
These three files use wildcard imports so that they can export
symbols in a compatible location. The real code lives elsewhere.
So disable the pylint tests for the relevant sections of code.
* aws ssm parameter lookup test case - fails demonstrating no exception when parameter missing
* aws ssm parameter lookup - fail in case parameter doesn't exist
* aws ssm parameter lookup test case - failing case for nice return from path lookup
* aws ssm parameter lookup - convert incoming taglist to a key-value dictionary
* aws ssm parameter lookup - pep8 / style clean up
* aws_ssm lookup plugin rewrite for more standard interface
* aws_ssm module and lookup - introduce integration test and fix:
* aws_ssm module and lookup - error case integraton test and many PEP8 and other cleanups
* aws ssm parameter lookup - Various fixes in response to review + recursive fix & test
* aws ssm parameter lookup - more in response to review - shertel/abadger
* aws ssm parameter lookup unit test - move to mocker according to abadger
* aws ssm parameter lookup - integrate with new documentation fragment
* aws ssm parameter lookup - accept either aws_profile or boto_profile
* aws ssm parameter lookup - eliminate lookup document fragment until env vars are fixed later
* Added server_type parameter - defaults to K8S
* Changed server_type default value to cloud.
* Added server_type entry to documentation and updated server_type choice K8S to k8s_node
* Added support for overriding the default ONEANDONE_API_URL, and custom wait_timeout period for wait_for methods.
* Added firewall_policy, load_balancer, and monitoring_policy cloud modules for oneandone provider.
* Updated OneAndOneResources class and argument specs for monitoring policy and load balancer.
* Addressed ansible-test sanity pep8 and validate-modules errors.
* Removed extra modules to adhere to one module per PR.
* Fixed a typo
the hostname parameter is wrong. It will throw an error: "Unsupported parameters for (vyos_system) module: hostname Supported parameters include: domain_name, domain_search, host, host_name, name_server, password, port, provider, ssh_keyfile, state, timeout, username" It is supposed to be host_name. Only the example for documentation seems to be wrong in the module.
This fix adds a fallback mechanism where Storage Datacluster
is not enabled with SDRS. If user has Storage Datacluster without SDRS
then we will not get any datastore recommendation. This will fallback to
normal datastore selection method.
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Add fat filesystem support
fatresize is temporarily disabled
* Refactor Filesystem.get_dev_size
For more sharing with vFAT class
* Fix filesystem tests on some OSs
I think this is due to older mke2fs on those systems.
* Fix vFAT command on FreeBSD
newfs doesn't seem to work on image files
* Refactor filesystem.grow()
Split out grow_cmd generation and Device operations
* Use swap as unsupported filesystem
Except FreeBSD, which doesn't have mkswap
* Be consistent about str(dev) vs dev.path
Prefer str(dev), this works transparently with '%s' formatting.
* Enable vfat resize, only test fatresize >= 1.0.4
Lower versions have a segfault bug.
* Only install fatresize where available
FreeBSD, OpenSUSE, RHEL and CentOS < 7 don't ship it.
This fix adds environment variable fallback method to read
argument parameters if user has not specified.
Fixes: #35368
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* updates to azure_rm_keyvault
* updates to azure_rm_keyvault
* updates to azure_rm_keyvault
* updates to azure_rm_keyvault
* updates to azure_rm_keyvault
* updates to azure_rm_keyvault
* updates to azure_rm_keyvault
* updates to azure_rm_keyvault
* updates to azure_rm_keyvault
* updates to azure_rm_keyvault
* updates to azure_rm_keyvault
* updates to azure_rm_keyvault
* updates to azure_rm_keyvault
* fix update bugs, add update test
This was causing an exception in the TaskQueueManager when a third
party handler plugin was processed that inherited or explicitly
called the callback method from super because the method signature
was incorrect in callback/__init__ and it processed the arguments as
incorrect data types as a side effect.
Signed-off-by: Adam Miller <admiller@redhat.com>
The product string (used as the DMI product name) changed from
"OpenStack Nova" to "OpenStack Compute" between Mitaka and Newton
in the OpenStack RDO packaging.
This fix adds a verbose message about non-existent VM when specified
with operation, due to idempotency we can not detect correct state.
Fixes: #27384
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* When using private networking the ip_address key contains the private ip.
Add the following info to module output when available:
- private_ipv4_address
- public_ipv4_address
- private_ipv6_address
- public_ipv6_address
* ACI: Change result output as discussed
* Update all modules to use new aci.exit_json()
* Update output_level spec and docs
* Fix integration tests
* Small PEP8 fix
* Asorted fixes to tests and aci_rest
* More test fixes and support for ANSIBLE_DEBUG
* Fix another PEP8 issues
* Move response handling inside ACI module
* Reform of ACI error handling and error output
* Diff multiline json output
* Fix a few more tests
* Revert aci_bd tests
* Small correction
* UI change: existing->current, original->previous
* UI change: config->sent
* Update all modules with RETURN values
* Fix a few more tests
* Improve docstring and add 'raw' return value
* Fix thinko
* Fix sanity/pep8 issues
* Rewrite unit tests to comply with new design
* Remove redundant default for target_paths
* Make invalidation requests idempotent
* Remove redundant exception handling around boto3_conn
* Add cloudfront_invalidation to the changelog
* ACI: Implement aci.boolean() to return an ACI boolean
A boolean value in ACI is not always standardized to yes/no.
Sometimes we have active/inactive, or enabled/disabled
Whereas the interface we want is a true YAML boolean.
We did not modify enabled/disabled values at this time.
I first want to determine if this implementation is acceptable.
* Support enabled/disabled as well, with deprecation messages
* Fix typo
* Fix PEP8 issue
* Ensure the aci object exists before using it
* Add comment to ensure this gets fixed in v2.9
* Fix typo
* Fix over-byte
* Update ios tests to call `provider`
To continue to support testing `connection: local`
* Fix command dict handling in ios_user
* Clean up unit tests, too
This change deprecates vsphere_guest in favor of vmware_guest and other
related modules.
The major reasons behind deprecation are -
- Pysphere - Unofficial Python bindings of vCenter deprecated in the year 2013.
- VMware provides official Python bindings for vCenter, which is used in vmware_guest.
- vcsim - simulator used in integration testing of vmware module does not support PySphere
APIs, which makes it more difficult to test vsphere_guest.
Please see [deprecation plan](https://github.com/ansible/community/wiki/VMware%3A-vsphere_guest_deprecation)
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Insert lines before or after when the regexp exists elsewhere in the file
* Correct filter syntax in lineinfile integration test
* Use multi-line YAML syntax on lineinfile tests
Unify indentation
* Add lineinfile tests for same line matched to different regexps
* Remove debug statement from test
* added force option to hostmacro to allow control of overwriting existing macro
* wording changes as suggested by eikef in PR 35516
* further wording changes from eikef
* added 'version_added: 2.5' to the documenation for the force option
* aci_aaa_user: Manage AAA users on ACI fabrics
* Fix module documentation
* Ensure we allow to not set accountStatus and expires
* Added aaa_password_lifetime and aaa_password_update_required support
* Improvements to integration tests in light of issue 35544
* Fix ACI ISO 8601 formatted string
* Add HAS_DATEUTIL
Add an Ansible module for VDO (Virtual Data Optimizer), a
device-mapper module that provides deduplication, compression,
and thin provisioning. This module provides the ability to create,
remove, and modify parameters on storage volumes created by VDO.
The return documentation for ios_facts used an inconsistent mix
of str and string to denote a string data type.
This patch modifies all to be "string".
* Test for include_tasks & include_role bug
Related to ansible/ansible:#21890
* Fix nested include_tasks called from role
This fixes the path of included files when you want
to call include_task inside a role's task file and this
role is itself called from multiple level of playbook include_tasks
Related to ansible/ansible:#21890
This fixes ansible/ansible:#35109
* keycloak_clienttemplate
* BOTMETA maintainership for identity/keycloak namespace
* fix superfluous blank line
* catch ValueError when trying to decode JSON
* further documentation for protocol mappers and some checks
* whitespace fixes, YAML fixes
* remove state: dump, update argument_spec and documentation with suboptions
* add documentation for realm option
* document aliases for auth_keycloak_url, auth_username, and auth_password (i.e. url, username, and password)
* remove bearer_only, consent_required, standard_flow_enabled, implicit_flow_enabled, direct_access_grants_enabled, service_accounts_enabled, public_client, and frontchannel_logout from module options.
* Handle multiple sub prompts for network_cli connection
Fixes#35349
* Check if the same prompt is repeated in consecutive window
if it is repeated it indicates there is problem with answer
provided
* In that case report error to user
* Fix CI failure
* Fixes#35349
* Add prompt_retry count to control max number of times
to expect the same prompt before it error's out
* Make required changes in ios and eos terminal plugin to handle
wrong enable password correctly and return proper error
message to user.
* Check if the same prompt is repeated in consecutive window
if it is repeated it indicates there is the problem with an answer
provided
* In that case report error to user
Fixes#33993
In current implementation while trying to fetch the
current cli prompt terminal plugin executes `\r` on remote host.
This causes if command execution results in a prompt for
example executing `enable` command results in `Password:` prompt
there by executing `\r` on password prompt which is not intended.
To fix it while fetching current prompt from terminal plugin use `get_prompt()`
api in network_cli that returns the latest matched prompt instead of
unnecessary executing `\r` on remote host.
* Add jenkins_job_facts module
* Fix docs
* Fix connection error handling
* Add support for filtering by color
* Miscellaneous code cleanup
* Spell out "underscore" in comment
* Update required state in docs
* Adding warnings.
* Forgot choices for acme_version in code.
* Removed 'errors' support again.
* For DNS challenges, also return complete record to simplify wildcard generation (see #35283).
* Also returning order URI and account URI. This is mainly for debugging purposes.
* Adding more clear separation between the two calls. Avoids problems where code during second call thinks it is during first call and doesn't stop with error, but doesn't obtain a new certificate either.
* Added validate_certs parameter.
* Actively discouraging from setting validate_certs to false.
* Fixing DNS challenge example.
* Adding new output challenge_data_dns, which simplifies DNS challenges.
1. Removed redundant default values in argument_spec
2. Enclosed non standard python libraries in Try Except ImportError block
3. Added region as a mandatory element in argument_spec
4. Updated the typo in api_params while accessing job queue. Changed it from job_queue to jobQueue
5. Updated the set_api_params() method to use snake_dict_to_camel_dict()
6. Updated the ANSIBLE_METADATA version from 1.0 to 1.1
7. Updated the version_added in Documentation from 2.4 to 2.5
8. Initialized response value to None
9. Updated the RETUN documentation
10. Updated the return from manage_state() method to not embed batch_job_queue_action in ansible_facts
11. Updated the module.exit_json() in main() to convert any keys back to snake_dict format using camel_dict_to_snake_dict to maintain consistency throughout the module
12. Changed the filename from batch_job_queue.py to aws_batch_job_queue.py
The rpc method should be exposed to the modules over the connection rpc
mechanism. This fix will expose the rpc method to call generalized rpc
endpoints on remote devices
This fixes an indention bug introduced in
45a9f96774
that was causing the virtualization_role to be set to 'host'
for many cases incorrectly.
Fixes https://github.com/ansible/ansible/pull/21621
(the issue mentioned in the pr)
* galaxy remove incorrect check for role path before extraction
Fixes#35217
Currently lib/ansible/galaxy/role.py checks roles_path and will
ignore paths that don't currently exist which it should not because
the path will attempt to be created by the role extraction process
(which is valid and expected behavior) and if unable to write at the
time of role extraction into the role_path, that error will be
handled properly at that point in the process.
Signed-off-by: Adam Miller <admiller@redhat.com>
* add test case for galaxy install with rolefile and rolepath
Verify we don't regress GitHub Issue #35217
Signed-off-by: Adam Miller <admiller@redhat.com>
* fix the integration test
Signed-off-by: Adam Miller <admiller@redhat.com>
* double quote for shellcheck glob warning
Signed-off-by: Adam Miller <admiller@redhat.com>
* fix galaxy install tests to not need remote resources
Signed-off-by: Adam Miller <admiller@redhat.com>
* make shellcheck sanity tests happy
Signed-off-by: Adam Miller <admiller@redhat.com>
* prep git global conf for running the galaxy install tests in docker
Signed-off-by: Adam Miller <admiller@redhat.com>
* move ansible-galaxy tests into their own target, make git conf non-global
Signed-off-by: Adam Miller <admiller@redhat.com>
* fix up tests based on feedback
Signed-off-by: Adam Miller <admiller@redhat.com>
* remove extra newline from aliases file
Signed-off-by: Adam Miller <admiller@redhat.com>
* Revert model and serialnum to older version
* Add stacked versions of model and serialnum as separate facts
* Add unit test to check stacked output
* Alter model regex to address #34768
Change the code and comments around recovering from a TypeError in
handling the return value from lookup plugins to make it clearer what
we're recovering from.
Enforce module deprecation.
After module has reached the end of it's deprecation cycle we will replace it with a docs stub.
* Replace deprecated modules with docs-only sub
* Use of deprecated past deprecation cycle gives meaningful message (see examples below)
* Enforce documentation.deprecation dict via `schema.py`
* Update `ansible-doc` and web docs to display documentation.deprecation
* Document that structure in `dev_guide`
* Ensure that all modules starting with `_` have a `deprecation:` block
* Ensure `deprecation:` block is only used on modules that start with `_`
* `removed_in` A string which represents when this module needs **deleting**
* CHANGELOG.md and porting_guide_2.5.rst list removed modules as well as alternatives
* CHANGELOG.md links to porting guide index
To ensure that meaningful messages are given to the user if they try to use a module at the end of it's deprecation cycle we enforce the module to contain:
```python
if __name__ == '__main__':
removed_module()
```
* Add an AWS Direct Connect virtual interface module
Fix DirectConnectError exception wrapper to be compatible with fail_json_aws()
* Fix documentation and handle BotoCoreErrors as well
* Add the aws and ec2 documentation fragments
* add purge option for secondary ip addresses and fix changed to reflect when addresses are modified
* Improve option documentation and make the secondary_private_ip_addresses option required if purging secondary private ip addresses.
* ec2_eni: update version_added to 2.5 for purge_secondary_private_ip_addresses option.
* Add aws_ses_identity module
* Update CI alias, add BotoCoreError exception handling.
* Add SES and SNS permissions to hacking/aws_config to run aws_ses_identity integration tests
* Fix edit_config multiline commands on IOS
The current code for multiline commands in IOS is broken: If you
pass a dict containing a command, prompt and answer it is seen
later as unicode string, but if you do a json.loads it fails
as the keys/values are enclosed in single quotes but JSON requires
double quotes.
Fixes#23539
* Fix pep8
* Use ast literal_eval
It's safe to use, as it is just for types and wont execute arbitrary code.
This adds a new module called vmware_vm_vm_drs_rule. This module add
affinity/antiaffinity rule for VM-VM in given cluster.
Fixes: #32109
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
Fix adds ipa host_add functionality of generating random
passwords for host enrollement. This fix also preserves the
idempotency of host_add and host_mod IPA APIs.
Fixes: #30328
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Added 'quota_id','sso', 'boot_menu', 'usb_support', 'serial_console' fields to ovirt_vms module
* always run ansible-test first
* always run ansible-test first 2
* suggested changes applied
* refactors nios api shared code to handle provider better
This change refactors the shared code to be easily shared between
modules, plugins and dynamic inventory scripts. All parts now implement
the provider arguments uniformly.
This also provides a centralized fix to suppress urllib3 warnings coming
from the requests library implemented by infoblox_client
* fix up pep8 errors
* fix missing var name
* add checking of interfaces, providing defaults or errors if required keys are not defined
* fix so that iteration of interfaces only happens if defined
* permit tagging of lambda functions
Signed-off-by: fernandoalex <jfernandoalex@gmail.com>
* changed iteritems for items and test for identity to is not
* fixed task name in example
* module object was not being passed to the function
Module object was not being passed to the funtions whitch was causing error in the error handling.
* Use compare_aws_tags
Check for attribute and fail if botocore needs to be updated
Update version_added
* Fix examples
* pep8
* Remove unnecessary var
Handle BotoCoreError
ecs_taskdefinition_facts should not populate ansible_facts with
so much information.
Better to just return the contents of the dict directly.
Reduce line lengths, use AnsibleAWSModule, don't reimplement
camel_dict_to_snake_dict.
`wait_for_instances: no` means do not wait for instances to become
InService/Healthy before terminating them. It does not mean don't
wait for the ASG to delete.
Not waiting for the ASG to delete can cause problems when recreating it.
Ensure that waiting for the ASG to delete respects `wait_timeout`.
Add `iam_user` module that supports check mode
Based entirely on `iam_group` with check mode support added.
Does not support management of groups, so as not to interfere with the
`iam_group` module.
* Update the copyright
* Remove e.message from exception handling since it is not available on python 3
* New aws_region_facts module to be able to get facts from AWS regions
* Fix copyright
Handle BotoCoreError too
Remove exception handling around around boto3_conn
Fix docs
Fix version_added
* Update metadata_version
Fix return doc
* Adding new code for new module and new module_utils with the pip pyfmg package
* Changed login and logout functionality and renamed mod_utils file as well as cleaned up PEP8 syntax
* Removing extra Ansible parameters and fixing more syntax issues
* Fixing more syntax issues and comparing against previous FTNT script module
* Changing import location to pass syntax checks
* Fixing pylint errors
* Removing test files
* Add unit tests and enabling a login session check within main in order to throw error if network connection exception
* Fixing syntax issues for adding unit tests
* Changing case for pip package requirements
* adding comments
* adding version restriction on pip package for testing
* adding version restriction on pip package for testing
* More comments
* Fixing documentation errors and add the ability to skip a test if it isn't present
* Fixing Pep8 error with whitespace (tab) in the row
Do not assume that all exception constructors accept a single string
argument. For example UnicodeError's __init__ takes 5 parameters:
encoding, object, start, end, reason.
Also, if e.message is present but empty, fall back on stringifying
the exception occurrence.
Fixes#35270
* Add transfer checksum verification in copy module, to ensure that the file was transferred to the remote successfully. Fixes#35029
* Guard on no checksum
* Add version_added
* New module: ec2_vpc_egress_igw
* minor pep8 fix and doc update
* add test dir and files
* add tests for gateway module
* fix up return documentation per review
* remove HAS_BOTO3 stuff as it is handled in AnsibleAWSModule per review
* fix an error with failure message and add custom handler for non-existent vpc ID
* add additional tests and update tests per review
* ignore errors on clean up tasks
* update module copyright to newer format
* fix exception handling since BotoCoreError doesnt have response attribute
* actually fix exception handling this time so it works with Py3 as well
* add functionality to create thin pool / volume on Linux LVM to lvol module
add `thinpool' parameter.
change `lv' parameter to not required.
To create thin poll, specify `thinpool'(, `vg' and `size') parameter and omit `lv' parameter.
It will create thin pool, nameed by `thinpool' parameter.
To create thin volume, specify both `thinpool' and `lv' parameter (also `vg' and `size' paramter is need).
It will create thin volume on `thinpool' pool, named by `lv' parameter.
Thin volume and pool can delete whith 'state=absent' parameter.
Thin volume is resizable like normal volume.
Thin pool can extend, but not reduce. This limitation is in Linux's LVM.
* Add thin volume support
- Based on f816618
- Indicate that either lv or thinpool are required parameters using
AnsibleModule's required_one_of.
- Resolve conflict with snapshot functionality
* Fix typo in documentation
* Fix and simplify logical volume check
* Rebase fixes
* Convert examples to native YAML syntax
* Fix failure with snapshot creation
* Properly fail when trying to snapshot a thinpool volume
* Don't fail when no size given for thin volume snapshot
Fixesansible/ansible-modules-extras#2478
* Convert old style required property sneaked in through rebase
* Fix 'too many leading #' syntax check
* Module to generate Diffie-Hellman parameters
Implements #32577
* Add integration tests for openssl_dhparam
* Slightly refactor check to prevent unnecessary regeneration
* Fix code smell in tests
Highly annoying to have to do this again and again and again as the rules change during the game
* Using module.run_command() and module.atomic_move() from a tempfile.
* Remove underscore variable
Ansible prefers dummy
* fix broken import
Error was:
lib/ansible/modules/cloud/azure/azure_rm_dnsrecordset.py:223:0: NameError: name 'ARecord' is not defined
* doc: use formatting functions
* remove unused dict
If the module is set to absent, read all possible configurations and remove them.
i.e. not just do a 'no switchport', as leaving around other options make
the logic handling harder.
If the user wants to remove switchport, remove all config for the interface
and finally push a 'no switchport'.
Also, I needed to map all possible params from interface regardless if state
is absent or present, so I can later detect what I need to remove in case of absent.
* Fix debug logs failing with persistent connection
Fixes#33047
* As debug logs are written on stdout, it interrupts
the communication between ansible-connection(background)
process and main process. To avoid this add a string similar
to exactly identify the response string.
* Remove unwanted code in ansible-connection
* Fix review comments
* Fix spurious log emitted on ansible-connection stdout issue
* ansible-connection which runs as a background process sends a
json string (contains response received from remote device)
to foreground ansible-playbook process over stdout.
* If in case debug flag is enabled the connection_loader api
invoked from ansible-connection `ssh = connection_loader.get('ssh', class_only=True)`
results in emitting debug logs on stdout. This spurious log
interfere with the actual response and results in failure while
reading json string in ansible-playbook process
* To avoid this save stdout of ansible-connection and redirect it string
buffer to accumulate all the logs emitted by core API's
* Add these logs in `result['messages']` which is send a json string after reinstating saved stdout
* Remove unwanted code in ansible-connection
* Fix review comment
* adding support to manage ipa services
* IPA Services does not have a description
* fixes from code review
* Cosmetic changes (indentation) + documentation
* adds support for using connection=netconf
This change updates the module to provide support for using
connection=netconf instead of connection=local. If connection=netconf
is used, then the various connection arguments will be silently ignored.
* adds netconf plugin default
This adds a default implementation for netconf plugins if the network_os
is not specified. The default plugin will implement only the standard
netconf rpcs
* fix up pep8 issues
* Don't skip an inventory source just because it has a comma, make sure it's also doesn't exist as a path. Fixes#34931
* Add integration test for inventory path with commas
* Adding enos_config.py action plugin to create backup properly
* Changing BSD to GPL
* Changing License file to GPL
* Updating enos_config.py
* Updated copy right year to 2017
* Look for password prompts at the beginning of the line only
* Adds secondary checks for the supplied sub-prompts
Handles the case for enable prompts where enable_pass may be incorrect
and the deivce is still prompting for the password
* * Changes to enable network_cli and netconf on modules.
* limits connection local for single TC per playbook.
* * adds a note on why only 1 TC is executed with connection: local
* adds two new infoblox lookup plugins
* nios - lookup plugin to return nios objects to the playbook
* nios_next_ip - lookup plugin to return the next avaiable ip address
* adds some additional examples to nios lookup
* fix up pep8 failures
* updates in response to review comments
* updates to azure_rm_sqldatabase
* updates to azure_rm_sqldatabase
* updates to azure_rm_sqldatabase
* updates to azure_rm_sqldatabase
* updates to azure_rm_sqldatabase
* updates to azure_rm_sqldatabase
* updates to azure_rm_sqldatabase
* updates to azure_rm_sqldatabase
* updates to azure_rm_sqldatabase
* updates to azure_rm_sqldatabase
* updates to azure_rm_sqldatabase
* updates to azure_rm_sqldatabase
* updates to azure_rm_sqldatabase
* updates to azure_rm_sqldatabase
* updates to azure_rm_sqldatabase
* updates to azure_rm_sqldatabase
* updates to azure_rm_sqldatabase
* updates to azure_rm_sqldatabase
* updates to azure_rm_sqldatabase
* updates to azure_rm_sqldatabase
* updates to azure_rm_sqldatabase
* updates to azure_rm_sqldatabase
* updates to azure_rm_sqldatabase
* support the mutilple ip configuration
* Update azure_rm_networkinterface.py
* add test
* fix spell
* make the virtual network name more flexiable
* add test
* fix
* fix lint
* add test
* fix parameter
* deprecate the flatten ip configuration
* fix lint
* fix encoding
* fix mirror
* fix
* load model from common
* ecs_ecr: Remove registry ID from create repository call
[Boto3 documentation][1] specifies 'repositoryName' as the only expected
argument. The `**build_kwargs(registry_id)` part also adds 'registryId' which,
when executed, fails with: 'Unknown parameter in input: “registryId”, must be
one of: repositoryName'.
[AWS API documentation][2] also lists only the 'repositoryName' parameter. I.e.
this is not a problem with the boto3 library.
The default registry ID for the account that's making the request will be used
when creating the rpository. This means that if the `registry_id` specified by
the user is different from the default registry ID, then the policy changes
following the repository creation would fail, because the repository will have
been created in one repository but subsequent calls try to modify it in
another. Added a safeguard against this scenario.
[1]: https://boto3.readthedocs.io/en/latest/reference/services/ecr.html#ECR.Client.create_repository
[2]: https://docs.aws.amazon.com/AmazonECR/latest/APIReference/API_CreateRepository.html
* Fix concurrent ECR integration tests
If the `ecr_name` is the same in multiple concurrent test runs, then they can
interfere with one another causing both to fail. The `resource_prefix` is
guaranteed to be unique for different jobs running in CI an so avoids this
issue while also making it easier to identify the test which created the
resource.
* Remove compat code for to_unicode, to_str and to_bytes
Code was marked as deprecated and to be removed after 2.4
* Remove is_encrypted and is_encrypted_file
Code was marked as deprecated after 2.4 release.
* Add identifier option to apache2_module
There is a convention connecting the name passed to a2enmod and the one
appearing in apache2ctl -M. Not all modules follow this convention and
we have added a growing list of implicit conversions.
As a better long-term solution this adds an "identifier" option to be
able to set both strings explicitly.
* Run debian-specific tests only there
* Improve cleanup after apache2 tests
This is a follow-up/extension of https://github.com/ansible/ansible/pull/33630
* Add example for the new identifier option
* Put all debian tests in a block
* Imported lookup plugin from Role
* Plugin cleanup, including:
* Use existing Python YAML parsing
* Remove environment variables as connection options
* Added initial debugging information
* Reworked the lookup plugin using the Python Request library. As it's available through Ansible, it makes communication with Conjur much more straight forward.
* Removed un-used libraries
* Fixed linting issues
* Standardized output on `format` and insure it works for 2.6, 2.7, and 3.x.
* Use quote_plus from the six library for improved python 2/3 behavior.
* Refactored identity & configuration to prefer user's file. This also includes a refactor to remove an un-needed dictionary merge method.
* Removed `requests` in favor of `ansible.module_utils.urls`.
* Refactored netrc loading to warn if host is not present.
* Tests and a refactor to support easier testing.
* Added reference to website
* Fixed two linting errors
* Fixed an extra line found by linting
* Updated file write to use binary to insure config files are written correctly
* Resolved linting issues
* Refactored config & identity loading to take advantage of plugin options
* Cleanup a bunch of small items caught by linting
* Removed extra line caught by linting
* Swapped in pytest and added some tests with mocked network responses
* Pushing to see if this approach works better...
* Refactored be open_url mocking based on feedback
* Fixed a couple linting issues & refactored mocking into each method to attempt to resolve a failing test
* Use a generic MagicMock for python 2.6
* Fixes doc typo
require -> required
* Use `type: path` in identity_file and config_file
Also removes `expanduser` calls below (which will now be called automatically on
paths.)
* Defines maintainers for conjur_variable plugin
* BOTMETA.yml:
** defines $team_cyberark_conjur as maintainers of Conjur Variable plugin
** adds myself and @jvanderhoof to that team
* Adds URLs to relevant documentation for Conjur Variable lookup plugin
* Clarifies "the server," "the machine" -> "controlling host"
The machine identity used is that of the Ansible controlling host, not any
server being provisioned or instructed. This documentation change aims to make
that relationship clear.
* Adds response code to exception message on authentication failure
* Enhances exception messages to specify the controlling host
These error messages are less likely to confuse a user as to which machine is
associated with the files, identities, and configurations being described.
* Adds ANSIBLE_METADATA for Conjur variable lookup plugin
* UCS LAN Connectivity Policies and integration tests
* Docs updated
* UCS LAN Connectivity Policy and integration tests
* Fix use of description in docs and argument_spec so validate-modules passes
* UCS vNIC templates and integration tests
* docs updated
* UCS vNIC template and integration test
* Update docs and argument_spec for description, mtu, and target.
* Azure: added auth_source to override the source of the credentials
* removed broken cli auth and fix some review changes
* missed some more cli auth stuff that isn't required
* Added cli auth back in
* Added docs around cli auth
* fix azure CLI auth issues
* tweak error messages
* fix auto fallback to cli
* fix import issues when azure-cli not installed
This fix corrects the module state returned by github_module.
Now,
* When the release already exists, state is "ok"
* When the release is created, state is "changed"
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
The code that depends on this is all in the action plugins so we should
leave it there until we either move that action plugin code over
(fixup_perms2) or we give action plugins the ability to register new
config.
* win_setup: Add Product ID and Product Key in facts
So this is actually a very nice way to get product key information from
systems collected centrally.
Especially with systems that have been upgraded from Windows 7 or
Windows 8 to Windows 10 may not have a valid Windows 10 product
license key printed anywhere, it was a digital license.
If you ever have to reinstall the system, you may recover the system
from the recovery partition, or the original media, but cannot upgrade
to Windows 10 for free. By collecting the product key, one can always
reinstall your free Windows upgrade.
My only question is, do we want this to be part of the default facts, as
it may be considered important information. Or should we make a special
**win_product_key_facts** ?
* Add ACPI product key support
* Add integration test
* Remove Get-ProductKey function, move inline
* Inventory caching
* Add inventory caching for virtualbox
* Don't populate cache for virtualbox with stdout, use a dict of inventory instead
* Fix error creating the cache dir if it doesn't exist
* Keep cache default False and set to True in VariableManager __init__
* Check all groups before determining if a host is ungrouped.
aws_ec2 is an inventory plugin intended to replace uses of the `contrib/inventory/ec2.py`
inventory script.
For advanced grouping, please use the `constructed` inventory plugin.
Add deps/requires for fact collectors
Fact collectors can now set a required_facts
class attribute that will be a set of the names
of fact collectors they require to be run first.
ie, if a collector needs to know the ansible_distribution,
it should set it's required_facts to include 'distribution'
required_facts = set(['distribution'])
If a collector requires another collector, it gets added
to the selected collector names.
We then topological sort the ordering of the collectors
so that deps work out (ie, 'distribution' will run before
'service_mgr')
required_facts were added to the collectors for:
- network (requires 'distribution', 'platform')
- hardware (requires 'platform')
- service_mgr (requires 'distribution', 'platform')
Fix name references for facts (need 'ansible_' prefix)
is service_mgr
Fixes#30753
Enforce that there can be only one --new-vault-id or
--new-vault-password-file and use this instead of
--encrypt-vault-id
* Add a config option for default vault encrypt id
* add documentation around commonly-used Facts for Conditionals
There are a few Facts that are often used for Conditionals, so
documenting them on the Conditionals page with their possible values.
* Edit
* win_setup: Add Product ID and Product Key in facts
So this is actually a very nice way to get product key information from
systems collected centrally.
Especially with systems that have been upgraded from Windows 7 or
Windows 8 to Windows 10 may not have a valid Windows 10 product
license key printed anywhere, it was a digital license.
If you ever have to reinstall the system, you may recover the system
from the recovery partition, or the original media, but cannot upgrade
to Windows 10 for free. By collecting the product key, one can always
reinstall your free Windows upgrade.
My only question is, do we want this to be part of the default facts, as
it may be considered important information. Or should we make a special
**win_product_key_facts** ?
* Add ACPI product key support
It is not possible to modify the load balancer configuration
for ECS Service.
As it is possible to detect this, it's nicer to fail gracefully
than return AWS's less meaningful failure message.
Fix PEP8 compliance
Otherwise, it fail with:
Traceback (most recent call last):
File \"/tmp/ansible_c1zmq3i9/ansible_module_openssl_certificate.py\", line 808, in <module>
main()
File \"/tmp/ansible_c1zmq3i9/ansible_module_openssl_certificate.py\", line 787, in main
certificate.generate(module)
File \"/tmp/ansible_c1zmq3i9/ansible_module_openssl_certificate.py\", line 692, in generate
certfile.write(str(crt))
TypeError: a bytes-like object is required, not 'str'
* Verify that acme-tiny is present
* Use run_command rather than subprocess for acme-tiny
Besides consistency with the rest of the code base, this also
add 2 bug fixes:
- ansible should no longer show "warning, junk after json" when using the module
- it also verify the return code of acme-tiny, and so fail when the
verification fail. The previous code didn't check rc, so it would continue
with a empty file
The accumulated collected_facts was being update
with new facts _after_ filtering them. So only
facts that pass the filter would ever be passed
to other fact collectors.
For 'filter=ansible_service_mgr', even though it requires
the platform and distribution facts and even collects them,
they would get filtered out and never passed to the other
collectors that need them (service_mgr for ex).
Fix is just to add the unfiltered facts to collected_facts.
Adds unit tests for fact filter and collected_facts.
Fixes#32286
The search string used to look for Clear Linux
was changed in 45a9f96774 to
be more specific, but was too specific. Now finding
a substring match for 'Clear Linux' in /usr/lib/os-release
is enough to consider a match.
Since the details of the full name in os-release varies
('Clear Linux Software for Intel Architecture',
'Clear Linux OS for Intel Architecture', etc) the
search string match was failing and would fall back to the
'first word in the release file' method resulting in
ansible_distribution='NAME="Clear'
Also add a meta fact indicating which search string
was matched.
Test case info from:
https://github.com/ansible/ansible/issues/31501#issuecomment-340861535Fixes#31501
Extract vault related bits of DataLoader._get_file_contents to DataLoader._decrypt_if_vault_data
When loading vault password files, detect if they are vault encrypted, and if so, try to decrypt with any already known vault secrets.
This implements the 'Allow vault password files to be vault encrypted' (#31002) feature card from
the 2.5.0 project at https://github.com/ansible/ansible/projects/9Fixes#31002
People expect to be able to upload files to s3 using standard
locations for files.
Providing an action plugin that effectively rewrites the `src`
key to the result of finding such a file is a great help.
Tests added, and IAM permissions corrected
* npm module compatible with npm5
Uses the `--long` flag in `npm list` to get the `missing` key back.
* npm: add integration tests
* npm: test the module with npm 4 as well
* Remove debug tasks, use variables
* Use tests instead of filters
* Adds xcambar as a maintainer of the npm module
influxdb_user module has user_name, user_password which may confuse with existing
login arg username and password. Added aliases prefixed ith login_ to
help distinguish.
- Adding Let's Encrypt production ACME directory URL
- Marking examples as one big example with several alternatives for the first step
- Adding another example which uses aliases for options, and uses DNS-01 challenges
This fixes get_vm method to use propertyCollector which
can efficiently find the virtual machine from given VMware
infrastructure using only name.
* VMware: Refactor vmware_guest module
* Add nested paths of datacenter
* Add tchernomax suggestions
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* win_iis_webbinding: Fix bug with ipaddress * returning multiple bindings
instead of only the ones defined as *. Address possible future issues around
hostheader * by just disallowing it. Resolves 25473. Added new test for
this case.
Removed all validation for https binding collisions due to difficulty in
validating all cases in which they could or could not collide. As a
result, also removed return values relating to certificate data.
Updated testing and docs appropriately
* win_iis_webbinding: added break to remove binding loops
* Add monitoring/grafana_datasource module
added ds type mysql and postgres + check of parameters
* Added option max_concurrent_shard_requests for es_version >= 5.6
current_size is returned from the API as string, while self.size
(the requested size) is an integer. This caused the comparison
to always be False, and a resize request to always be sent.
* Moved the encryption to its own action method.
* removed silly default value for encryption type.
* Code formatting issues from pull request ANSIBOT.
* changed version_added to "2.5"
because of new new options available
* changed version_added to "2.5"
because of new new options available
* changed version_added to "2.5"
because of new new options available
* compare arg+aliases between docs and argument_spec
* Add some special handling for the network modules provider options that also appear in the top level arg spec
* Fix error code for bigip_hostname
* Address merge conflicts due to changes in f5 modules
* Update validate-modules ignore based off a clean execution
* Address merge conflicts
* Address renamed module
* Address recent changes to modules
* Add ignore for ucs_ip_pool
* Update aci modules to get more reliable documentation comparison, but not mutating the module_utils aci_argument_spec
* Update ignore.txt after recent aci updates
* Add extra guard to ensure we handle provider special only for network modules
* Address additional changes to modules
* added cloudfont.py, modified cloudfront_facts.py class name and fixed a minor bug
* Improvements to cloudfront_distribution
* Reduce the scope of the cloudfront_distribution module
* Remove presigning
* Remove streaming distribution functionality
* Add full test suite for cloudfront distribution
* Meet Ansible AWS guidelines
* Make requested changes
Fix tests
Use built-in waiter
Update copyright
* Added check to prevent failed empty changesets from being left behind
* Fixing comments from PR 34933, prevent infinte loop and stricter exception catching
* Clarify which ping module to use
Ensure each of the ping modules link to each other
ping - Requires Python on remote-node
nxos_ping - Only on Cisco NXOS
ios_ping - Only on Cisco IOS
net_ping - For network devices
win_ping - only for Windows
* Add additional properties to storage domains
* add warn low space for additional storage properties
* Fixing comments
1. Fixing documentation
2. Use default None
3. Remove redundant if condition
4. remove added discard since it was already added
* Apply comments #2
Fix default value to None
Use percentages instead of GB
* Adds custom_data parameter to azure virtual machine resource
Invoke custom_data in an integration test: This invocation of
custom_data should not cause any side effects.
* Bugfix: String encoding now works in both python2 and 3
* Fix pep8 violations
* Use nginx to serve a text file created via custom_data and verify that
that custom_data is working
* fix up azure_rm_virtualmachine custom_data
* tweaks #25924
* simplify string encoding fun
* don't rely on external packages
There are changes that the merge config can fail, but the module
will still report success. This adds a blob of code to start
collecting those failures and bubbling up a module failure
accordingly.
* adding azure_rm_mysqldatabase
* updates to azure_rm_mysqldatabase
* updates to azure_rm_mysqldatabase
* updates to azure_rm_mysqldatabase
* updates to azure_rm_mysqldatabase
* updates to azure_rm_mysqldatabase
* updates to azure_rm_mysqldatabase
* Updated docs around force_update
* adding azure_rm_postgresqldatabase
* updates to azure_rm_postgresqldatabase
* updates to azure_rm_postgresqldatabase
* updates to azure_rm_postgresqldatabase
* updates to azure_rm_postgresqldatabase
* updates to azure_rm_postgresqldatabase
* updates to azure_rm_postgresqldatabase
* Updated docs around force_update
* describe_images is very slow if not filtered to owner accounts
*or* if the Owners parameter is passed (unless the Owners parameter
is `self`). Convert Owners parameters to `owner-id` and `owner-alias`
filters where possible. Tests with CLI show that `--owners self` is
fast, `--owners 123456789012` is slow (with or without owner-id filter).
* describe_image_attributes fails against accounts other than your
own. Launch permissions are useful information, but not critical.
* first dirty container instance
* added my name ;-)
* more updates
* more updates
* removed unnecessary stuff
* container instance updates
* several fixes
* undo changes in common
* removed unnecessary references, fixed delete
* added / updated parameters
* updated samples & comments
* updated docs, comments, samples and added registry credentials
* added ip address and port
* query existing container instance (but result not used yet)
* some major changes to the module
* more fixes
* added requirement for containerinstance module
* adding integration test
* fixes for pull request
* updated version
* updated version to 2.5
* updated version
* updated integration.cloud.azure.txt as requested by test framework
* removed due to merge reasons
* updated requirements-azure.txt
* undone azure-rm-common
* lf
* properly update test requirements
* first dirty container instance
* container instance updates
* several fixes
* review related updates
* review related fixes
* undo changes in common
* added / updated parameters
* query existing container instance (but result not used yet)
* updated version to 2.5
* updated version
* removed due to merge reasons
* updated requirements-azure.txt
* undone azure-rm-common
* properly update test requirements
* minor fix - sanity
* fix one issue after rebasing
* removed files accidentally added while rebasing
* removed checking for changes
* several fixes
* fixed sanity
* updates as requested by reviewers
* removed ci as it doesn't work
* reenabled ci
* renamed container instance, removed required: false
* removed default: null
* final updates according to the review
* one more fix
* first dirty container instance
* added my name ;-)
* more updates
* more updates
* removed unnecessary stuff
* container instance updates
* several fixes
* undo changes in common
* removed unnecessary references, fixed delete
* added / updated parameters
* updated samples & comments
* updated docs, comments, samples and added registry credentials
* added ip address and port
* query existing container instance (but result not used yet)
* some major changes to the module
* more fixes
* adding integration test
* fixes for pull request
* updated version
* updated version to 2.5
* updated version
* updated integration.cloud.azure.txt as requested by test framework
* removed due to merge reasons
* updated requirements-azure.txt
* undone azure-rm-common
* lf
* properly update test requirements
* review related updates
* first dirty container instance
* container instance updates
* several fixes
* review related fixes
* undo changes in common
* added / updated parameters
* query existing container instance (but result not used yet)
* updated version to 2.5
* updated version
* removed due to merge reasons
* updated requirements-azure.txt
* undone azure-rm-common
* properly update test requirements
* minor fix - sanity
* fix one issue after rebasing
* removed files accidentally added while rebasing
* removed checking for changes
* several fixes
* fixed sanity
* updates as requested by reviewers
* removed ci as it doesn't work
* reenabled ci
* renamed container instance, removed required: false
* removed default: null
* final updates according to the review
* one more fix
* changed location as default from resource group can't handle containers
* updates to container instance
* fixed mistakes during merge
* one more fix
* another mistake
* container instance fixes
* several fixes to container instance
* return value fix
* minor update
* just one api version right now
* fixed api version
* container instance does not suppurt api version
* removed unnecessary try blocks
* removed tags related things
* fixed pep8
* final fixes?
* final updates to the module
* more fixes
* Fix ec2_vpc_net tags
PR #33105 broke the tags returned by ec2_vpc_net - it was returning the raw boto3 list instead of a dict as expected.
* Add a test for tags
* `validate` or `ignore` values may be set by module, credential profile, or env. Module has highest precedence, followed by credential profile, then environment, and defaults to `validate` if not otherwise specified.
* fixes#33455
* IP address pool module and integration tests
* Examples corrected and imports moved to beginning of module.
* Revert ucsmsdk import lines to avoid import sanity test failures.
* Add comment around imports for ucsmsdk.
* Module DOCUMENTATION should match argspec
Large update of many modules so that DOCUMENTATION option name and
aliases match those defined in the argspec.
Issues identified by https://github.com/ansible/ansible/pull/34809
In addition to many typos and missing aliases, the following notable
changes were made:
* Create `module_docs_fragments/url.py` for `url_argument_spec`
* `dellos*_command` shouldn't have ever had `waitfor` (was incorrectly copied)
* `ce_aaa_server_host.py` `s/raduis_server_type/radius_server_type/g`
* `Junos_lldp` enable should be part of `state`.
Fixes # 34917
* Remove spaces from in between interface name
* Convert interface name to lower case as interface name
is case insensitive wrt configuring on remote device.
* Add VnicProfileMapping to register VM
Add vnic profile mappings to be supported in vm registration
* Add VnicProfileMapping to register template
Add vnic profile mappings to be supported in template registration
* Add reassign bad macs to register VM
Add reassign bad macs to be supported in vm registration.
* Add additional mappings params for VM registration
As part of the effort to support DR with oVirt
the "Register" operation is being added with a new mapping parameter
that describes the configuration of the registration.
The idea of supporting DR site to site in oVirt is to have 2 active
setups using storage replication between the primary setup and the
secondary setup.
Both setups will have active DCs, clusters, and hosts, although those
will not be identical.
The user can define a mapping which will be used to recover its setup.
Each mapping can be used to map any VM's attribute stored in the OVF
with its correlated entity.
For example, there could be a primary setup with a VM configured on cluster A.
We also keep an active secondary setup which only have cluster B.
Cluster B is compatible for that VM and in case of a DR scenario theoretically
the storage domain can be imported to the secondary setup and the use can
register the VM to cluster B.
In that case, we can automate the recovery process by defining a cluster mapping,
so once the entity will be registered its OVF will indicate it belongs to
cluster A but the mapping which will be sent will indicate that cluster B should
be valid for every thing that is configured on cluster A.
The engine should do the switch, and register the VM to cluster B in the secondary site.
Cluster mapping is just one example.
The following list describes the different mappings which were
introduced:
LUN mapping
Role mapping
Permissions mapping
Affinity group mapping
Affinity label mapping
Each mapping will be used for its specific OVF's data once the register operation
will take place in the engine.
* Add additional mappings params for Template registration
As part of the effort to support DR with oVirt
the "Register" operation is being added with a new mapping parameter
that describes the configuration of the registration.
The idea of supporting DR site to site in oVirt is to have 2 active
setups using storage replication between the primary setup and the
secondary setup.
Both setups will have active DCs, clusters, and hosts, although those
will not be identical.
The user can define a mapping which will be used to recover its setup.
Each mapping can be used to map any Template's attribute stored in the OVF
with its correlated entity.
For example, there could be a primary setup with a Template configured on cluster A.
We also keep an active secondary setup which only have cluster B.
Cluster B is compatible for that Template and in case of a DR scenario theoretically
the storage domain can be imported to the secondary setup and the use can
register the Template to cluster B.
In that case, we can automate the recovery process by defining a cluster mapping,
so once the entity will be registered its OVF will indicate it belongs to
cluster A but the mapping which will be sent will indicate that cluster B should
be valid for every thing that is configured on cluster A.
The engine should do the switch, and register the Template to cluster B in the
secondary site.
Cluster mapping is just one example.
The following list describes the different mappings which were
introduced:
Role mapping
Permissions mapping
Each mapping will be used for its specific OVF's data once the register operation
will take place in the engine.
* Add support for update OVF store
Add support for task of update OVF store in a storage domain.
* allow shells to have per host options, remote_tmp
added language to shell
removed module lang setting from general as plugins have it now
use get to avoid bad powershell plugin
more resilient tmp discovery, fall back to `pwd`
add shell to docs
fixed options for when frags are only options
added shell set ops in t_e and fixed option frags
normalize tmp dir usag4e
- pass tmpdir/tmp/temp options as env var to commands, making it default for tempfile
- adjusted ansiballz tmpdir
- default local tempfile usage to the configured local tmp
- set env temp in action
add options to powershell
shift temporary to internal envvar/params
ensure tempdir is set if we pass var
ensure basic and url use expected tempdir
ensure localhost uses local tmp
give /var/tmp priority, less perms issues
more consistent tempfile mgmt for ansiballz
made async_dir configurable
better action handling, allow for finally rm tmp
fixed tmp issue and no more tempdir in ballz
hostvarize world readable and admin users
always set shell tempdir
added comment to discourage use of exception/flow control
* Mostly revert expand_user as it's not quite working.
This was an additional feature anyhow.
Kept the use of pwd as a fallback but moved it to a second ssh
connection. This is not optimal but getting that to work in a single
ssh connection was part of the problem holding this up.
(cherry picked from commit 395b714120522f15e4c90a346f5e8e8d79213aca)
* fixed script and other action plugins
ensure tmpdir deletion
allow for connections that don't support new options (legacy, 3rd party)
fixed tests
When using the -c option, like "ansible-config -c ~/.ansible.cfg view"
with python 3, it fail with this error message:
ERROR! Unsupported configuration file extension for b'/home/misc/.ansible.cfg': .cfg
* port elb_classic_facts to boto3
update module to use AnsibleAWSModule
* Add RETURN docs for elb_classic_lb_facts
* Remove superfluous exception handling around connection
Fix exit_json call and RETURN docs
This fixes fact gathering of VMware guest machines with
older Linux Kernel versions. These older Kernels do not support /sys
filesystem which is used to gather virtualization related facts.
'dmidecode' is the safest option to find out virtualization related facts.
Fixes: #21573
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Cache tasks as they are queued instead of en masse
This also moves the task caching from the PlayIterator to the
StrategyBase class, where it makes more sense (and makes it easier
to not have to change the strategy class methods leading to an API
change).
Fixes#31673
* Cleaning up unit tests due to 502ca780
* Add validation for the next to last line of a module
* Fix last error code
* Reduce to a single conditional
* Fix conditionals
* Move the final warnings statement to main() in mysql_replication
oVirt modules support environment variables to be passed as
authentication details for connection. But ovirt_auth doesn't support
it. This patch add support for it.
Change cb1b705218 introduced the newline
parameter on network_cli plugin, but that was never introduced on cliconf.
This causes ios_user to break, since the newline value is never plumbed thru
to network_cli
* updates to azure_rm_sqlserver_facts
* updates to azure_rm_sqlserver_facts
* updates to azure_rm_sqlserver_facts
* updates to azure_rm_sqlserver_facts
* updates to azure_rm_sqlserver_facts
* updates to azure_rm_sqlserver_facts
* updates to azure_rm_sqlserver_facts
* updates to azure_rm_sqlserver_facts
* updates to azure_rm_sqlserver_facts
* updates to azure_rm_sqlserver_facts
Currently the ManageIQ API does not support azure_tenant_id but
this is in the process of being fixed. This commit changes
the recently-committed parameter to allow for the upcoming change.
* Fix persistent command timeout handling
We were using play context timeout on ansible-connect to set
the persistent command timeout handler. Thus, we were ignoring
the persistent_command_timeout setting.
Moreover, even by changing that on ansible-connection, were again
overriding it on cliconf send_command, since in a same process we can
just set a single alarm and cliconf send_command alarm setup is executed
after ansible-connection alarm setup.
* Remove alarm setting on cliconf send_command
The alarm is set regardless before it is executed by ansible-connection.
Setting an alarm again, overrides/disables the previous ones as a single
process can just have a single alarm set.
* Move the setting of persistent command timeout to network_cli
We do also use ansible-connection for connection local, so if a
user provides a timeout via provider that would be ignored if we
set the value on ansible-connection.
Moving that logic to network_cli plugin constructor makes both
connections to work.
* Remove debug statements
* Set the persistent command timeout on task_executor
We can't set the timeout on ansible-connection nor network_cli,
otherwise tasks using provider timeout won't work.
This patch is primarily a refactor to make the validate-modules arg-spec
no longer generate a traceback. It additionally includes removal of deprecated
code in the virtual server module.
The main patch is to remove the traceback generating code. There are
other small fixes that were made in addition to doing that.
* Removed re-def of cleanup_tokens.
* Changed parameter args to be keywords.
* Changed imports to include new module_util locations.
* Imports also include developing (sideband) module_util locations.
* Changed to using F5Client and plain AnsibleModule to prevent tracebacks caused by missing libraries.
* Removed init and update methods from most Parameter classes (optimization) as its now included in module_utils.
* Changed module and module param references to take into account the new self.module arg.
* Minor bug fixes made during this refactor.
The main purpose of this patch is to do the refactor that
supports replacing tracebacks with fail_json. Additionally, the
following was done.
* Removed re-def of cleanup_tokens.
* Changed parameter args to be keywords.
* Changed imports to include new module_util locations.
* Imports also include developing (sideband) module_util locations.
* Changed to using F5Client and plain AnsibleModule to prevent tracebacks caused by missing libraries.
* Removed init and update methods from most Parameter classes (optimization) as its now included in module_utils.
* Changed module and module param references to take into account the new self.module arg.
* Minor bug fixes made during this refactor.
Primarily, this patch contains refactors to remove tracebacks that
are generated when libraries are missing. There is also,
* Removed re-def of cleanup_tokens.
* Changed parameter args to be keywords.
* Changed imports to include new module_util locations.
* Imports also include developing (sideband) module_util locations.
* Changed to using F5Client and plain AnsibleModule to prevent tracebacks caused by missing libraries.
* Removed init and update methods from most Parameter classes (optimization) as its now included in module_utils.
* Changed module and module param references to take into account the new self.module arg. Minor bug fixes made during this refactor.
This patch was primarily an effort to reduce traceback errors for
work that sivel was doing. Part of (and in some cases in addition to)
that, the following was done.
* Removed re-def of cleanup_tokens.
* Changed parameter args to be keywords.
* Changed imports to include new module_util locations.
* Imports also include developing (sideband) module_util locations.
* Changed to using F5Client and plain AnsibleModule to prevent tracebacks caused by missing libraries.
* Removed init and update methods from most Parameter classes (optimization) as its now included in module_utils.
* Changed module and module param references to take into account the new self.module arg.
* Minor bug fixes made during this refactor.
This fix refactor vmware_host module to use PyVmomi.
Also, handle SSLVerifyFault exception to get hostsystem's certificate
thumbprint.
Fixes: #20819
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* aci_aep_to_domain: New module to bind AEP to domain
* Changes to bring in line with aci_domain
* Rename aep_domain to domain_dn, add types
* Fix pylint errors
The jira module uses ansible.module_utils.urls.fetch_url which will
attempt to get that value of the validate_certs parameter from the
module; if present it will honor it's value, otherwise it defaults
to True.
This patch adds that parameter to jira so that it can be specified
by the user and honored by ansible.module_utils.urls.fetch_url
Signed-off-by: Adam Miller <admiller@redhat.com>
* fix broken import
* ansible.module_utils.ec2.HAS_BOTO is already used
* wait_timeout parameter: use 'int' type
* wait is always True there
* doc: use formatting function
* Update validate-modules arg_spec introspection to be faster, by only mocking the imports we explicitly list
* The use of types.MethodType in redhat_subscription wasn't py3 compatible, use partial instead
* Remove argument_spec import hacks, make them errors, we can ignore them with ansible-test
* Enable the --arg-spec flag for validate-modules
* aci_domain_to_vlan_pool: Add domain to VLAN pool
A new ACI module to bind a domain to a VLAN pool.
This module still needs integration tests once it is formally review and
accepted.
* Add examples to documentation
* aci_domain_to_encap_pool: Add domain to encap pool
A new ACI module to bind a domain to an encap pool.
This module still needs integration tests once it is formally review and
accepted.
* Fix domain RN and attributes
* aci_domain: Manage phys, vmm, l2ext, l3ext and FC domain profiles
A new ACI module from the high priority list.
* Add RHEV VMM provider as Redhat
* PEP compliancy
* Make variables specific to domain
* Add examples
* aci_vlan_pool_encap_block: New module to manage VLAN encap blocks
This module is a simplified version of the aci_encap_pool_range module.
* PEP8 fixes (closer to the original)
* Add integration tests
* Mellanox OS name change: MLNXOS changed to ONYX
Signed-off-by: Samer Deeb <samerd@mellanox.com>
* Fix alphabetical order of modules metadata
Signed-off-by: Samer Deeb <samerd@mellanox.com>
Adding "-SyncWindow 0" flag to the Compare-Object call used to determine if the existing and proposed IP address lists are the same. This makes the array comparison mark changes in order as a difference.
Fix for bug #34651
* aci_vlan_pool: Module to manage VLAN pools
This is a simplified version of the aci_encap_pool module.
* Add integration tests, based on aci_encap_pool
* Add new module for managing ospf protocol on mlnxos devices
Signed-off-by: Samer Deeb <samerd@mellanox.com>
* Fix test name, and documentation.
Signed-off-by: Samer Deeb <samerd@mellanox.com>
This module is mostly written to make room for the option of not
setting the `value` parameter while `state=absent`. That choice being
a feature, since it allows both for the removal of individual records
as well as the removal of full record sets.
The opposite goes for the `record` parameter, which needs to be defined
at least by its default value for the module to be able to produce any
meaningful result. Hence making it explicit as part of required_if.
The MX record type is already plenty covered. In addition to the
priority parameter having a default value, the `ensure_dns_record`
method does its own parameter checking.
SRV records on the other hand do need additional parameter
checking. Primarily with the `delete_dns_records` method in mind.
Fixes#23957
* filesystem: list used tools
* filesystem: btrfs and reiserfs don't support resizing
* filesystem: list supported filesystems
use formatting functions and 'filesystem' instead of 'file system'
* filesystem: PEP8
* filesystem: remove useless calls to module.boolean
* filesystem: fail when the requested action isn't implemented
* filesystem: resizefs: list supported FS rather than unsupported
* filesystem: refactor
* filesystem: add integration tests
* filesystem: allow to use image file with 'dev' param
* filesystem: test resizefs (ext2/3/4 filesystems only)
* filesystem: Btrfs, handle older version than v0.20-rc1
* filesystem: use loop keyword (integration tests)
* filesystem: new test, check when another filesystem already exists
* filesystem: add myself as a maintainer
* filesystem: fix tests as filters
* WIP Refactor EOS code to use cliconf
* Fix connection.get where sendonly is True
* Fix pylint issue
* Remove return from send_config and various exec_commands
Also, removed a few try/except, which are anyways handled in
Connection.
This adds a new module called 'vmware_host_config_facts' which
gathers facts about advanced configuration informantion about ESXi host or all
ESXi hosts from given cluster.
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* converted win_updates to an action plugin for automatic reboots
* do not set final result when running under async
* Updated documentation around win_updates with async and become
_name attribute is used when providing generic error messages
(such as connection problems). As AnsibleAWSModule does not inherit
things from AnsibleModule by default, need to provide it.
* First pass at Terraform module
* Support output variables
* Support idempotent plan checks and external plan files
* Add check mode support
* Support custom statefile location & remove color-coding from shell output
* Docs
* Let missing statefile hard-fail
* Update to support present/planned/absent states
* PEP8
* Add docs & fix python 2.6 incompatibility
* PEP8
* PEP8
* Fix misleading cleanup/detach documentation
Current documentation is not concrete regarding desired
state of `detach` to make container be properly removed
with `cleanup`
Make `detach:false` be mentioned explicitly
* Tweak formatting
* eos - Support use_proxy argument
Running ansible with a proxy set in the environment causes the eos module to
attempt to connect to devices via the proxy.
To prevent this behaviour the only way is to unset the proxy out of the
environment, either by wrapping the ansible calls or doing it in a piece of code
executed before connect, such as a vars_module (though this is very hacky).
This change allows you to set `use_proxy: no` under the provider config.
The default value is set to True, which mirrors the behaviour seen today.
* nexos - Support use_proxy argument
Running ansible with a proxy set in the environment causes the nexos module to
attempt to connect to devices via the proxy.
To prevent this behaviour the only way is to unset the proxy out of the
environment, either by wrapping the ansible calls or doing it in a piece of code
executed before connect, such as a vars_module (though this is very hacky).
This change allows you to set `use_proxy: no` under the provider config.
The default value is set to True, which mirrors the behaviour seen today.
* adding azure_rm_postgresqlserver
* removed semicolon placed by mistake
* updates to azure_rm_postgresqlserver
* updates to azure_rm_postgresqlserver
* updates to azure_rm_postgresqlserver
* updates to azure_rm_postgresqlserver
* updates to azure_rm_postgresqlserver
* updates to azure_rm_postgresqlserver
* updates to azure_rm_postgresqlserver
* updates to azure_rm_postgresqlserver
* Updated dependencies
* Allow protection of certain keys during camel_to_snake
Create an `ignore_list` parameter that preserves the case
of the contents of certain dictionaries. Most valuable
for `tags` but other uses might arise.
* Port ec2_vpc_route_table to boto3
Update tests to reflect fixes in boto3.
* Add RETURN documentation to ec2_vpc_route_table
* Update DOCUMENTATION to be valid yaml
* Add check mode tests
* Provide a way to explicitly invoke the debugger with in the debug strategy
* Merge the debugger strategy into StrategyBase
* Fix some logic, pin to a single result
* Make redo also continue
* Make sure that if the debug closure doesn't need to process the result, that we still return it
* Fix failing tests for the strategy
* Clean up messages from debugger and exit code to match bin/ansible
* Move the FieldAttribute higher, to apply at different levels
* make debugger a string, expand logic
* Better host state rollbacks
* More explicit debugger prompt
* ENABLE_TASK_DEBUGGER should be boolean, and better docs
* No bare except, add pprint, alias h, vars to task_vars
* _validate_debugger can ignore non-string, that can be caught later
* Address issue if there were no previous tasks/state, and use the correct key
* Update docs for changes to the debugger
* Guard against a stat going negative through use of decrement
* Add a few notes about using the debugger on the free strategy
* Add changelog entry for task debugger
* Add a few versionadded indicators and a note about vars -> task_vars
* ios_logging: Handle IOS versions that dont put the word host in logging config
This change allows the ansible module to parse and match either variant
being present in running-config.
* ios_logging: enhance logging buffered to handle both size and level
This change allows ios_logging to ensure local (buffered) logging
is configured with both the correct buffer size and logging level,
when both are specified on the task.
* Add test for unexpected egress rule in default VPC
When passing rules_egress to ec2_group, the default
egress rule shouldn't be created (if `purge_rules_egress`)
is set. Test this.
* Respect egress rule defintions for default VPC groups
When passing rules_egress and purge_rules_egress, the
default egress rule should not be created
Fixes#34429
* Change AWS credential passing to be YAML anchors
Vastly simplify the AWS tasks by reducing the credentials to a YAML
block
This fix adds rpm.error exception which is raised when
API unable to get envra information from RPM package.
Also, adds integration test for local_envra method.
Fixes: #30074
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* wrap boto3 connection in try/except and handle exception, add traceback import
* params dont need to be mutually exclusive and support check mode
* add check to set nacl_ids to empty list instead of None for boto3 func
* standard exception handling using traceback
* update current RETURN documentation which is incorrect.
* update logic to check for and return ipv6 cidr instead of ipv4 cidr in a NACL
* ignore default and reserved rule numbers - greater than 32766
* was breaking on non-standard protocol numbers - AWS nacls now support full list -1 to 254
* update port range and icmp type/code handling
* add some more detail to returned nacl entries
* Update exception handling to account for BotoCoreError
Remove exception handling from the boto connection creation since it does nothing
* rules numbers from 32767 to 65535 are reserved for internal AWS use so we ignore here
* Add some integration tests for ec2_asg.
* Remove exception handling from ec2_asg boto3 connection since it is handled in boto3_conn().
* Update test failure assertions
* Use yaml anchor for credentials and remove unnecessary dependencies.
* Move AWS boto3 module credentials tests to separate target
* Remove filters from tests
* Add new module mlnxos_protocol for enabling disabling protocols on
MLNX-OS Mellanox network devices
Signed-off-by: Samer Deeb <samerd@mellanox.com>
* Fix Test Class name
* Fix IP routing protocol support
Signed-off-by: Samer Deeb <samerd@mellanox.com>
* Add missing support for check_mode, and Fix documentation
Signed-off-by: Samer Deeb <samerd@mellanox.com>
* remidate Windows debugging
Using $complex_args is not working (anymore?). We need to set $params directly.
* Fixing issue with win_iis_website parameter types
There are two types of attributes. "String" and "Configuration Attribute". We need to get the real "value" based on the type.
* Revert "remidate Windows debugging"
This reverts commit df75d3bb0d152b10c24187ce4c643b4733bae336.
* win_domain_user allow to update generic attributes
Signed-off-by: Marko Koehne <marko@mkoehne.de>
* win_domain_user.py fixed indentation
Signed-off-by: Marko Koehne <marko@mkoehne.de>
* win_domain_user.py attributes add version_added
Signed-off-by: Marko Koehne <marko@mkoehne.de>
* win_domain_user.p1 removed attributes from result
Signed-off-by: Marko Koehne <marko@mkoehne.de>
* moved run_change outside of if statement
* cs_network_offering: streamline docs a bit
* cs_network_offering: format traffic type as returned by API
* cs_network_offering: rename return to service_offering_id
* cs_network_offering: ensure absent tests don't require anyting else than name
* cs_network_offering: beautify the default_egress_policy param
* cs_network_offering: test enabling/disabling with existing syntax
* cs_network_offering: rename service_provider_list to service_providers
* cs_network_offering: allow update max_connections
* cs_network_offering: extend returns
* cs_network_offering: extend tests with max_connections
* cloudstack: rename cs_serviceoffer to cs_service_offering
* adjust references to old name
* cs_service_offering: fix limitcpuuse not handled
* minor docs fix
* update changelog
A bug in the parsing of single commands with commas
Token cleanup
Password argument now defaults to false
Addition of coding conventions from v3 conventions
This module can be used to add license offerings to a pool. This
is the second part required to license a remote device from a
BIG-IQ (the first being to create a pool with bigiq_regkey_pool)
* Don't use getattr in _get_parent_attribute to avoid recursion issues
Fixes#23609
* Move extend/prepend to field attribute
Also removes _get_attr* methods that were basically just calling
_get_parent_attribute because it needed to set those params.
Also modifies _get_parent_attribute() to pull those values from the
FieldAttributes instead of using the ones passed into the function.
* Better fixes for _get_parent_attribute
* Removes deprecated code from bigip_monitor_tcp
The deprecated code was moved into its own modules. We let it lay
here for a release, and now I'm removing it.
* Fixing upstreaming tests
This module can be used to create GTM servers (not to be confused with
GTM virtual servers) on a BIGIP. GTM servers are a component of the
datacenter, and GTM virtual servers are their members.
* basic.py: add mock to os.path.exists
* set_*_if_different: if check_mode enabled & file missing: set changed to True
Fixes#32676
Thanks to mscherer and Spredzy for the distributed triplet programming
session!
* Add integration test for missing attempts in until with failed/changed_when
* Extend tests to validate additional known behaviors of do-until loops
* Inject attempts into result earlier
The short-circuiting of include_role in TaskExecutor was using the _task object
in the result dictionary. This causes the playbook class to be serialized, which
is something we no longer do due to speed/size problems with nested objects.
Simply removing this should fix a lot of memory and speed problems with include_role.
This fix adds new module for managing various roles in
local ESXi server. Also, adds integration tests for this change.
Fixes: #27899
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
Code refactor to use f5 coding conventions. Removed deprecated
"enabled/disabled" params (this is now a state). Adds token cleanup
for cases where many api calls are made.
* Count ignored failed tasks and successful tasks with expected failure as failed tests.
* Make junit callback plugins changes backward compatible: add new task marker TOGGLE RESULT and new option fail_on_ignore
* Added a new module to fetch Avi Controller version and data
* Updated copyright notice.
* setting options to empty as all of it is coming from common args.
This refactors the bigip_virtual_server module to address several issues and
missing features. Additionally it adds tests and updates the coding standards
to the recent version used by f5. Finally, it removes deprecated items that
were announced in 2.4
* Use `AnsibleAWSModule`
* Update exception handling to use `fail_json_aws` and check
for `BotoCoreError` exceptions associated with bad connection
parameters.
* Remove connection creation exception handling as it does nothing.
* update DOCUMENTATION for network_cli and netconf
This updates the DOCUMENTATION string for both the netconf and
network_cli connection plugin.
* add additional options to the connection documentation
* update documentation based on review and feedback
* adds persistent connection options to documentation string
This fix adds support for Virtual Machine resource allocation
information. This information is related to limit and reserve CPU and Memory
of virtual machine.
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* mutually_exclusive add - ios_config parents works with lines by not src
* mutually_execlusive parents,src added to all other net modules
* tests for mutually_exclusive parents,src and whitespce removal
Currently the manageiq remote management module only supports
OpenShift, AWS and oVirt. This adds the ability to create VMware
providers by adding two additional parameters for configuring a
host VNC range.
The DigitalOcean API v2 supports creating a block storage volume from
a previously-saved snapshot using a snapshot_id string. This module now
likewise supports creating a block storage volume using a valid
snapshot_id string.
When creating a block storage volume from a snapshot_id using the
DigitalOcean API, the region and size_gigabytes parameters are ignored.
Therefore, these parameters are likewise ignored when using this module.
However, as of this commit, they are still required fields. It may be
necessary to find some way to eliminate these requirements if the
snapshot_id parameter is included.
The DigitalOcean API v2 allows for creating a block storage volume from
a previously-saved snapshot using the snapshot_id parameter. If this
parameter is used, the region and size_gigabytes parameters are
disregarded. In order to avoid confusion, when the snapshot_id parameter
is included when creating a block storage volume using this module, the
region and block_size fields are overridden and changed to null values.
This should make it clear that these values are NOT being used if a
snapshot_id is present.
This module will still fail as before if neither the region/block_size
or snapshot_id is not present when creating a block storage volume.
Documentation has been updated to reflect these changes.
* obscure type promotion issue in some versions of Powershell causes [int]::MaxValue to be promoted to [int64] when doing a COM property get or set. Since the "All" profiles value of 0x7FFFFFFF is [int]::MaxValue, it would trigger "Specified cast is not valid" when modifying a rule that's already set to All Profiles or trying to be.
* Fixed catch-all error handler to include exception detail
* Added test converage for this case
* Add Windows Domain facts for membership and server type
Adds additional facts to setup.ps1 for Windows hosts
* ansible_windows_domain_member - returns true if machine is domain
joined
* ansible_windows_domain_role - indicates role of machine in domain
Roles list is taken from
https://technet.microsoft.com/en-us/library/ee198796.aspx and will
return sensible values for non domain joined machines too.
* Use $win32_cs rather than Get-CimInstance Win32_ComputerSystem for consistency
* Begin rewrite of win_iis_webbinding
Add integration testing, check mode and idempotency
Add support for SNI
Fix replacing SSL cert on existing bindings
* finished up initial rewrite of win_iis_webbinding
* updated test to remove tests as filters
* updated win_iis_webbinding docs
* fix more doc/formatting issues win_iis_webbinding
* Removed string empty defaults for certs. Added a few new helpful
comments.
* Revert "Removed string empty defaults for certs. Added a few new helpful"
This reverts commit 48f35faea8d5294b34e1aa842a95c9352b90257f.
Remove examples from main section and make sure it is all in the examples. Should helpw ith the HTML breakage (it is too wide for most monitors).
tyop fixes too.
* Add module mlnxos_linkagg for configuring LAG and MLAG on Mellanox
switches
Signed-off-by: Samer Deeb <samerd@mellanox.com>
* Remove unnecessary method in unit-test
remove _execute_module and use execute_module from base class
* Add eos_interface module
* Implementation of eos_interface module
* Intergration test for eos_interface module
* Minor fix in eos_l3_interface module
* Minor fix in ios_interface integration test
* Fix CI issues
* Fix more CI issues
* Updated Avi Modules with following
1. Support to perform patch operation using the modules. The data update method is
selected using avi_api_update_method=patch and patch operation is determined by
avi_api_patch_op. The patch data is the normal params that are provided in the modules
2. Support for avi_credentials as single authentication dictionary for all API calls.
This is preferred way as opposed to previously all credentials details would pollute
the individual Ansible tasks. It also allows the module development to be enhanced
without breaking compatibility for new authentication schemes like SAML etc.
3. Support for sharing api_context between the module invocations. This is a
workaround to not do multiple logins to Avi Controller and be able to
re-use single login across multiple REST API calls.
4. Documentation update for new parameters and existing ones with Units data.
* Fixed the pylint and pep8 errors caused due to pycharm editor auto formatting
* update version parsing and move requirements to nso_* modules
prepare for introduction of nso_show module that has other version
requirements than the existing nso_* modules.
* Add nso_show module for retreiving config from Cisco NSO
New module that supports getting configuration and operational data
from Cisco NSO.
This fix adds user friendly message for 'type' argument.
The 'type' is a required param when performing 'create' or 'modify' operations
on network connection or device.
Fixes: #33680
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
Shell is implemented via the command module. There was a special case
in mod_args to do that. Make shell into an action plugin to handle that
instead.
Also move the special case for the command nanny into a command module
action plugin. This is more appropriate as we then do not have to send
a parameter that is only for the command module to every single module.
* vhba template and integration test
* SAN Connectivity Policies and integration test
* VSANs and integration tests
* WWNN/WWPN Pools and integration test
* WWNN/WWPN Pools and integration test
* option description spelled out (aliased to descr)
removed docs for list of dictionaries syntax
follow ACI indent style
state absent only requires dn name match (not full prop match)
* vhba template and integration test
* SAN Connectivity Policies and integration test
* VSANs and integration tests
* WWNN/WWPN Pools and integration test
* VSANs module and integration test
* removed docs for list of dictionaries syntax
follow ACI indent style
state absent only requires dn name match (not full prop match)
* vhba template and integration test
* SAN Connectivity Policies and integration test
* VSANs and integration tests
* WWNN/WWPN Pools and integration test
* vHBA templates and integration test
* option description spelled out (aliased to descr)
removed docs for list of dictionaries syntax
follow ACI indent style
state absent only requires dn name match (not full prop match)
* vhba template and integration test
* SAN Connectivity Policies and integration test
* VSANs and integration tests
* WWNN/WWPN Pools and integration test
* SAN Connectivity Policies only
* option description spelled out (aliased to descr)
removed docs for list of dictionaries syntax
follow ACI indent style
state absent only requires dn name match (not full prop match)
* disk can be mounted to vm
* add version added
* fix lint
* Fix some mirrors
* fix lint
* remove trailing space
* fix as review comment
* fix yaml
* fix
* fix
* Minor update to doc on unmounting disk from VM
* WIP adds network subnetting functions
* adds functions to convert between netmask and masklen
* adds functions to verify netmask and masklen
* adds function to dtermine network and subnet from address / mask pair
* network_common: add a function to get the first 48 bits in a IPv6 address.
ec2_group: only use network bits of a CIDR.
* Add tests for CIDRs with host bits set.
* ec2_group: add warning if CIDR isn't the networking address.
* Fix pep8.
* Improve wording.
* fix import for network utils
* Update tests to use pytest instead of unittest
* add test for to_ipv6_network()
* Fix PEP8
* Update task definitions for network_cli
* Add connection to debug messages
* Specify connection for prepare task
* pc won't be around for connection=network_cli
* Assorted Python 3 fixes
* Give default port if ansible_ssh_port missing
* delegate -> connection
* Extend error regex
Code refactoring of ipa_dnszone module
- use ipa_argument_spec
- use common documentation fragment
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Added module new win_disk_facts
* Corrected examples section
* Added integration tests
* Added some disk properties
* Removed whitspaces
* Extended docu
* Changed header
* Added partition, volume and physical disk output
* Removed MediaType property of phys. disk
* Added return values
Added virtual disk, volume and physical disk output
* Added docu for return values
* Removed whitespaces
* Improved and added values
- Added virtual disk return values
- Improved code
* Updated docu
* Removed whitespaces
* Removed check
* Improved code and docu
* Changed integration test
* Changed integration test
* Changed integration test
* Changed integration test
* corrected typo
* Added admin test because CIM is not available with user rights
* Changed unit prefix from decimal to binary
This fix check if DNS4 is None or not before proceeding with
other operations. Also, added unit test for this change.
Signed-off-by: Fedor Sumkin <qosys.net@gmail.com>
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
This fix adds 'port' as module parameter in VMware modules,
which allows user to specify vCenter or ESXi server port number for
admin connection.
Fixes: #34070
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Deprecate check_invalid_arguments
Check_invalid_arguments is a piece of functionality from the early days
of Ansible that should not be used. We'll remove it in Ansible 2.9.
Deprecating it for now.
* Add eos and fix tests to run multiple connections
* Update tests to report connection
* Add missing START messages
* Fix unspecified connection
* Python 3 updates
Exceptions don't have `.message` in Python 3
* Override `become` when using `connection=local`
* Slight restructuring to make eapi easier later on
* Move eapi toggle to prepare_eos
* Pull out connection on eapi tasks
* Fixing save so it still works. Adding changed as an option for save_when.
* Updating description to state that changed was added in 2.5.
* Fixing removal version for deprecated options.
* Add a lookup plugin for AWS account attributes
* PEP8
* Use config system instead of hard coding logic for environment variables
* simplify logic
* Return a flattened dict to make using easier
* Reformat return example
* Adds k8s.py
* Two module approach to support overlapping objects
* Clarify docs
* Clary state and force parameters
* Updates examples
* Add description and display_name
* Fix linting issues
* winrm: attempting to get kerb auth to work on MacOS
* moved to use pexpect if possible as it is simpler
* Made the pexpect event more lenient around different localisations
* Changed basic auth from NetworkCredential to Base64
* Added force_basic_auth parameter to win_get_url module
force_basic_auth provides user with option to control which mechanism to use
Updated win_get_url.py documentation section
* Add missing version_added in win_get_url.py
* minor update for documentation
Split the one monolithic test for basic.py into several files
* Split test_basic.py along categories.
This is preliminary to get a handle on things. Eventually we may want
to further split it so each file is only testing a single function.
* Cleanup unused imports from splitting test_basic.py
* Port atomic_move test to pytest.
Working on getting rid of need to maintain procenv
* Split a test of symbolic_mode_to_octal to follow unittest best practices
Each test should only invoke the function under test once
* Port test_argument_spec to pytest.
* Fix suboptions failure
Currently when we make up the return value, we take values based of the
parameters rather than the generated openssl_certificate itself.
This commits returns the actual certificate values making it all time
accurate.
https://docs.python.org/2/library/stdtypes.html#str.split
str.split([sep[, maxsplit]])
If sep is given, consecutive delimiters are not grouped together and are deemed
to delimit empty strings.
>>> "85563 ----------------C-- /var/lib/libvirt/images".split(' ')[0:2]
['85563', '']
>>> "85563 ----------------C-- /var/lib/libvirt/images".split()[0:2]
['85563', '----------------C--']
* Fixes a prompt doubling issue that impacted missing ios enable password prompts.
Due to get_prompt sending a '\n' the prompts became doubled and out-of-sync with what
was expected. This caused the enable command prompts to be missed.
Also added verification that on_become succeeded to reach enable prompt.
* Moved prompt doubling comment per shippable
This fix check for ESXi server instance before proceeding
with managing local user. Also, adds integration tests for
this change.
Fixes: #32465
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Add parent pid to persistent connection socket path hash
Fixes#33192
* Add parent pid in persistent connection socket path hash
to avoid using same socket path for multiple simultaneous
connection to same remote host.
* Ensure unique persistent socket path for each ansible-playbook run
* Fix CI failures
* Port ec2_vpc_net to boto3 and add support to expand existing VPCs
* Add s-hertel as an author for ec2_vpc_net
* Update ec2_vpc_net test for new error triggered by lack of credentials
Fix backwards compatibility
Document new return value
* Fix pep8 and return documentation
* Remove boto usage from boto3 modules
* Remove region checking
boto3_conn now takes care of region checking and handles NoRegionError
exceptions with a standard message
boto3_conn also takes care of other connection exceptions too.
* Document boto3 as a requirement for ec2_eni_facts
* Return id of ENI in addition to network_interface_id. To be compatible to ec2_eni.
* Added documentation for the return values of the ec2_eni_facts module
* Fix typo in docs for ec2_eni_facts
Provide Vault App role method to the lookup.
https://www.vaultproject.io/docs/auth/approle.html
Usage :
`{{ lookup('hashi_vault', 'secret=secret/hello:value auth_method=approle role_id=myroleid secret_id=mysecretid url=http://myvault:8200')}}`
You can skip `role_id` and `secret_id` if you set `VAULT_ROLE_ID` and `VAULT_SECRET_ID` environment variables.
* new package_facts module
Signed-off-by: Adam Miller <maxamillion@fedoraproject.org>
* remove package_facts pkg manager aliases, they are misleading
Signed-off-by: Adam Miller <maxamillion@fedoraproject.org>
* fix package_facts tests now that aliases are dropped
Signed-off-by: Adam Miller <maxamillion@fedoraproject.org>
* Initial commit for UcsConnection and ucs_macpool module.
Configures MAC address pools on UCS Manager.
* ansible-doc fixes
* PEP8 fixes
* pep8, pylint, and validate-modules fixes
* Correct indent issue introduced during pycodestyle cleanup
* Simplified module arugment setup.
Placed all code in main to avoid multiple calls and arg passing.
* module_utils/ucs changed to UCSModule which now handles login/logout directly
login_handle removed from module.params
doc updates on mac_list params and change to first_addr/last_addr for mac blocks
checking of all mac params
* Move module_utils to remote_management/ucs
Fix validate-modules issue with docs
* UCS MAC pool integration tests
Fixed issues with MAC pool descr and address range params
* Fixing aruba's inconsitent indenting.
* Adding config with different children indentation and unit test to confirm the different spacing does not matter.
* Fixing pylint check. Missed an r prefix.
* Added icinga2_host module
* Fix build error
* trailing spaces and other errors from ansible build process
* Formating
* docu errors
* last spacing; import module
* fix imports
* Removed request lib for ansible.module_utils.urls
* small whitespace fixes
* Remove typo
* Fix docu
* icinga2_hosts to icinga2_host in naming
* Update example
Fix Dewotine error when delete a none existing host
* Fixes docu problems
* White spaces
* small text improvements
* Remove force argument from module and docu
* Set author correct ( and hopefull the maintainer )
* Minor formatting changes
`os.environ['DO_API_TOKEN']` raised a `KeyError` preventing the check
for `os.environ['DO_API_KEY]` from being executed. Fix this by failing
only if the api token isn't set.
* When inserting a new rule in `insert_after_rule`, check if the old rule is
the last rule, to avoid a list index out of range error when attempting to
access the next rule.
* Add a test for inserting a new rule after the last rule.
* Bug Fixes to issues foubd during testing
* Removing blank line
* undefined-variable Undefined variable 'run_commands' and training new line
* Reverting and Modifying changes with both Unit test and Integrated test with Devices passing
Allow CamelCase version of snake_dict_to_camel_dict
(currently only dromedaryCase is supported)
Add reversible option to camel_dict_to_snake_dict
Add tests for both of these options
* Fix vyos on network_cli on python3
bytes do not have format() in Python3
* Push connection to tasks, with bonus connection=local test
* Run tests without explicit connection set
* Add/update START messages where appropriate
open(path) throws an error when called on a directory or UNIX socket,
and therefore a check to ensure that the path is absent will always
succeed when there is a directory or file located there.
This updates the check to use os.access(path, os.F_OK) instead, which
instead just checks that the path exists instead of trying to open it as
a file, and therefore properly handles directories and sockets.
This causes a slight semantic change in how permissions are handled.
The existing code will fail to work correctly if the user running the
module on the managed host has no read access to the path specified.
The new code will work correctly in that situation.
Both versions fail if the user can't traverse the parent directory.
I've also added a check to the try block to catch OSError. I've seen
this call fail with an OSError on rare occasion in the face of odd
extended permissions (usually MAC configuration) in cases where it
should technically return False. In such cases, the file is functionally
inaccessible to the user making the call, so it's essentially not there,
but it can't be created by them either. I've documented this, as well as
the fact that the bug this change fixes exists, and a rather nasty
inconsistency involving symbloic handling that I stumbled across while
testing this change.
Fixes: #20870
* vmware_host: add reconnect and add_or_reconnect states
Add "reconnect" and "add_or_reconnect" choices for "state".
* reconnect: reconnect an esxi to a vcenter (imply it is present).
* add_or_reconnect: do the same but add the esxi if absent.
Also:
* tag the cluster_name as required (because it is).
* tag esxi_username and esxi_password as not required because
they aren't when the esxi isn't added.
* vmware_host: add + prepare/document integration tests
vmware_host module
Add integration test for the add part of "add_or_reconnect" state.
Prepare and document integration tests for the reconnect part
of "add_or_reconnect" state and "reconnect" and "absent" states.
Currently we can't test those states as ReconnectHost_Task (for
"reconnect") and EnterMaintenanceMode_Task (for "absent") aren't
implemented yet in vcsim (from vmware/govmomi)
* Readded vital return parameters to the ec2_asg that have been spared for no obvious reason
* Fix typo in ec2_asg docs
* Fixing another typo in ec2_asg docs.
* Fixing save so it still works. Adding changed as an option for save_when.
* Updating unit tests.
* Updating description to state that changed was added in 2.5.
* Added new module: Azure RM SQL Servers
* fixed sanity issues
* enabled integration test
* disabling test as Microsoft.Sql namespace not available
* renamed servers -> server
* updates as requested in the review
* udpates to sql server
* renamed module
* replaced has_key by in
* flattened results
* final updates to sql server
* updates as requested in the review
* added more tests
* deleting unexisting instance up front
* more tests
* another round of test changes
* removed uneeded test
* Change cast_list_to_dict to more generic rekey_on_member
cast_list_to_dict was taking an arbitrary data format in and returning
an arbitrary data format out. Rework this to be a more generic function
which creates a dict of dicts based on a member of the dict.
Remove cast_dict_to_list since rekey_on_member handles the use cases we
know about and cast_dict_to_list suffers from the same problems as
cast_list_to_dict. If this is still needed we could think about filters
we could add to do this in a short jinja2 pipeline.
* Fix bare excepts (bare excepts even catch sys.exit())
Previously if a child's group vars section was defined before the
child group itself, an edge case would be hit where the state of the
pending declaration would process as var and therefore drop the
child pending declaration context. This would result in the group
vars defined for the parent group being out of scope for the child
group.
Example:
[web:children]
appnodes
proxies
[web:vars]
deployment_type=prod
[appnodes:vars]
foo_var=true
[appnodes]
appnodes[1:3].example.com
[proxies:vars]
bar_var=true
[proxies]
proxies[1:3].example.com
Previously the deployment_type variable would be out of scope for
both the appnodes and proxies groups. This patch fixes that.
Signed-off-by: Adam Miller <maxamillion@fedoraproject.org>
* allow multiple values per key in name fields in openssl_certificate
* check correct side of comparison
* trigger only on lists
* add subject parameter to openssl_csr
* fix key: value mapping not skipping None elements
* temporary fix for undefined "subject" field
* fix iteration over subject entries
* fix docs
* quote sample string
* allow csr with only subject defined
* fix integration test
* look up NIDs before comparing, add hidden _strict params
* deal with empty issuer/subject fields
* adapt integration tests
* also normalize output from pyopenssl
* fix issue with _sanitize_inputs
* don't convert empty lists
* workaround for pyopenssl limitations
* properly encode the input to the txt2nid function
* another to_bytes fix
* make subject, commonname and subjecAltName completely optional
* don't compare hashes of keys in openssl_csr integration tests
* add integration test for old API in openssl_csr
* compare keys directly in certificate and publickey integration tests
* fix typo
This fix adds following:
* Documentation update
* Add support for DHCP
* Refactor code to use PyVmomi class
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* firewalld: Implement zone operations
Zones are removed or added when no other operations are used in
conjunction with the keywords 'present' or 'absent'.
This leads to a logical and natural syntax of:
- firewalld:
zone: foo
state: present
for adding or removing zones.
Signed-off-by: Felix Kaechele <felix@kaechele.ca>
* firewalld: zone ops: addressed review concerns
- Added more documentation on the peculiarities of the zone operations
- Output meaningful error messages when trying to use zones incorrectly
Signed-off-by: Felix Kaechele <felix@kaechele.ca>
* ACI Encap Pool: Add new module to support VLAN, VXLAN, and VSAN Pools
* update logic for allocation_mode
* update docstring and tests
* Update filter_target since url method has been updated
This fix removes a deprecated Postgresql User role attribute
called 'CREATEUSER' and 'NOCREATEUSER'. Also, updated documentation
for deprecation.
Fixes: #24928
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
On Fedora Atomic Host, there is no yum or dnf, but the module ot use to
install package should be atomic_container. We verify that this is
a Fedora Atomic Host with rpm-ostree, not atomic since atomic
can be used on a regular non ostree distribution.
* Fix _clean_result for debug callback with 1 char var names
The check in _clean_results was removing any keys that happened
to be one of the chars in ('invocation') instead of the string
'invocation'. This was meant to be a tuple but there was no comma
so the for iterated the string instead of the tuple.
Introduced in 9dba580204fcc7d95d4ca2ea2ae4ce23fe28c2ed
Update unit test to catch this.
Fixes#33723
* Use .pop() to remove invocation from results dict
In base callback _clean_results, simplify the way the
'invocation' item is removed.
Add some more unit tests.
* Deprecate Entity, EntityCollection and use subspec in network modules
* As per proposal https://github.com/ansible/proposals/issues/76
deprecate use of Entity, EntityCollection, ComplexDict, ComplexList
and use subspec instead.
* Refactor ios modules
* Refactor eos modules
* Refactor vyos modules
* Refactor nxos modules
* Refactor iosxr modules
* Add support for key in suboptions handling
* Fix CI issues
* Refactor cloudscale API code
Move code common to all cloudscale cloud modules into a common base
class.
This is needed as a prepartion of the cloudscale_floating_ip module.
* cloudscale_floating_ip module
New cloud module to manage floating IPs on the cloudscale.ch IaaS
service.
* Update zabbix_host documentation (extend ipmi_-documentation, and update style to be consistent on the rest while we are at it)
* Remove ipmi_parameters being added to the API call when not required
* remove optional parameters from add_host, as well
Fix a bunch of things mentioned in the review.
Delete commented code from module. Add fix for vcsim not returning
uncommitted.
Add integration test.
Add changes suggested
* A first pass at moving libs to new dir structure
The network modules changed their module_utils dir structure.
This first patch establishes mod utils for F5 in this new structure.
Module use will be limited until things are more fleshed out
* Fixing upstream errors
* Fixing more issues
The command module docs were unclear. They talked about ignoring the user's environment which lead people to believe the user's environment variables were not used. In actual fact, the user's environment variables are used. They just are not expanded in the command.
* Bulk pep8 fixes - hand crafted
Fix by hand the remaining issues that autopep8 couldn't
* Next batch of hand crafted pep8 fixes
* Ignore W503
https://github.com/PyCQA/pycodestyle/pull/499
* Revert more of W503
* python3 support for letsencrypt module (fixes#30690)
* initialize result to a dict in some methods to prevent 'NoneType is not iterable' TypeError
* use dict.get() to retrieve values from info dict to prevent KeyError
* convert to/from text/bytes using _text methods for PY3 support
* Fail when attempting to modify unmodifiable target group parameters
As you can't modify Port, Protocol or VPC id for a target group, fail
when this happens rather than pretending to do it.
One could argue that the target group could be recreated rather than
failing, but this has massive knock on implications to other resources
that depend on the TG (all ASGs would need to be updated, the ELB
listener would need to be updated, etc)
* Use `.get()` instead of direct dictionary access
* Added modules to create, delete, and describe EC2 Placement Groups.
* Remove unnecessary print statement
* Update to use boto3.
* De-linting
* Remove facts from this PR
* Update to newer method of handling Boto3 connections and exceptions.
* Futzing around with imports and HAS_BOTO3
* Fix up exception imports.
* Remove redundant default.
* Handle DryRunOperation errors appropriately.
* Remove redundant BOTO3 check.
* Use shorter licence declaration.
* Remove redundant HAS_BOTO3 import.
* Add AWSRetry decorators to API calls.
* Add new 'strategy' parameter to allow for cluster and spread PGs.
`ansible-vault` is the only cli command which knows how to handle the
rekey options `--new-vault-id` and `--new-vault-password-file`. No
point in exposing those rekey options to any of the other ansible
commands.
On a practical level I think this matters most in ensuring that
`--help` doesn't produce any false/unhelpful output.
* fixes guess_os for netconf connections
This change fixes invalid calls to play_context when the network_os is
not set and the connection attempts to guess the network_os. The method
will now check the correct values for ssh key file and allow agent
instead of returning errors.
* fix up pep8 issues
* Zabbix 3.4 support fix.
As of 3.4 Zabbix version application does not have 'updateExisting'.
* added updateExisting in applications for old zabbix support.
* small codestylefix
This fix adds following:
* hosts as argument spec
* cluster_name as argument spec
* refactor to use Pyvmomi class
* API refactor and documentation
Fixes: #18980
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* add acr
* acr
* acr
* fix a minor error
* add tests and fixes as suggested
* use get_mgmt_svc_client to enable bi
* fixes as zim suggested
* code refinement
* get acr instance before update
* fix a bug
* remove Classic sku as it's going to deprecate
* pass sanity test
* fix sanity
* fixes based on comments
* fix broken namespace unregistered error
* fix a bug
* fix a bug
* fix
* add register namespace
* fixes tests
* remove pdb
* add ci azure test
* removed required: false
* renamed acr -> containerregistry
* fixed spelling mistake
* fixed idempotence
* fix for idempotence was wrong
* fixed a few issues
* different log when exception different than ResourceNotFound
* self.fail instead of log
* updated sample return value
* added login server in results
* fixed else
* fixed line too long
* cmp -> __ne__
* fixed trailing whitespace
* output.changed is false when instance updated
* fix for state change
* one more update
* update instance only when location or sku has changed
* fixed syntax error
* fixed acr test
* just removed unnecessary comment to trigger ci
* update return value shape
* flatten `state`
* change credential dictionary state
* add credentials to integration tests
* fixed: win_copy: typo "file file" (double "file")
Signed-off-by: Alexey Shumkin <Alex.Crezoff@gmail.com>
* Add quotes around filenames/directories
* Fix tests for new quotes
* Fix tests for new quotes
* One more ?
* Another one...
* Added module to describe EC2 Placement Groups.
* Update to newer way of handling Boto3 connections and exceptions.
* Futzing around with imports and HAS_BOTO3
* Fix up exception imports.
* Fix license block
* Correct task indenting in doc
* Added list-filtering example to docs
Without this additional code snippet `ansible-pull` will still accept
the `--vault-id` option. It just won't pass the option along when
invoking `ansible-pull`.
* - Netconf plugin addition for iosxr
- Utilities refactoring to support netconf and cliconf
- iosx_banner refactoring for netconf and cliconf
- Integration testcases changes to accomodate above changes
* Fix sanity failures, shippable errors and review comments
* fix pep8 issue
* changes run_command method to send specific command args
* - Review comment fixes
- iosxr_command changes to remove ComplexDict based command_spec
* - Move namespaces removal method from utils to netconf plugin
* Minor refactoring in utils and change in deprecation message
* rewrite build_xml logic and import changes for new utils dir structure
* - Review comment changes and minor changes to documentation
* * refactor common code and docs updates
In case of workflow delete action, the returned 404 status code
considered as invalid although it's a valid code for not found (deleted)
entity.
Removed verification of the status. Only success should be verified.
Fixes#33524
* Fix typo in net_logging/eos
* This seems to be required to use eos_user in this way
* Fix indentation in net_static_route/eos
* Rework interface check in eos_vrf
This should do the right thing.
This fix make error message easily understable which is provided
by vcenter or ESXi server.
Fixes: #24672
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Adds a tmsh command fallback
The bigip terminal plugin assumes that the remote shell is tmsh.
This is not always true. The remote shell may be bash sometimes.
This adds a different shell command in the case that bash is the
remote shell
* Fixing upstream errors
This fix adds functionality to configure vmware guest parameter called
'maxMkconnections'. Also, added integration test for this change.
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
This fix adds functionality to support memory_reservation and
memory_reservation_lock while managing Virtual Machine.
Fixes: #20407
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
This fix adds missing comma in different modules.
This removes implicit string concatenation in given list.
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
This fix adds additional check to get details about roles
from pg_roles instead of pg_authid. On AWS RDS instances,
access to pg_authid is restricted for security reasons.
Fixes: #32358
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Fix azure_rm_acs due to Azure breaking API change
* resolve code review feedbacks
* resolve test failures
* better name
* ignore case for vm size
* reformat code
* resolve code review feedbacks
* new windows module win_audit_policy_system
* removed the backup/restore functionality
adjusted to use run-command rather than running the command directly
adjusted testing appropriately for the above changes
* fixed issue with variable naming in testing
removed .psm1 from requires
fixed copyright
* Updated audit_type to list and added appropriate error handling
Updated testing accordingly
Fixed up documentation
* Refactor common network shared and platform specific code into package (part-1)
As per proposal #76 refactor common network shared and platform specific
code into sub-package.
https://github.com/ansible/proposals/issues/76
* ansible.module_utils.network.common - command shared functions
* ansible.module_utils.network.{{ platform }} - where platform is platform specific shared functions
* Fix review comments
* Fix review comments
* Refactors bigip_node
Includes a number of fixes and enhancements in addition to refactoring
the code to be inline with f5 standards
* Fixes upstream errors
Digital Ocean changed their api to no longer accept an integer as a resource_id. Fix adds changed data type (from integer to string).
Signed-off-by: Anthony Bond <bond.anthony@outlook.com>
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Adds bigip_policy_rule module
This module is the second component of managing LTM policies on
BIG-IP. This module lets you manage the rules of a policy
* Fixing upstream errors
* Correcting YAML errors
* Fixes and features for bigip_provision
Adds support for dedicated modules. Fixes bug in minimum name.
Adds wrappers around checking for up-ness so that they will contribute
to the watch loop
* Fixes upstream errors
This fixes an issue where the check for an import error would occur
before checking to see if firewalld is in "offline mode" and if it
is, then checking to ensure the version of the firewall python
library was new enough to support offline operations. This patch
will now fail with a correct error message in the scenario that
someone attempts to perform an offline operation but has a version
of the firewall python library that is too old.
Signed-off-by: Adam Miller <maxamillion@fedoraproject.org>
This fix makes name and folder as required together
parameters in vmware_guest_snapshot.
Update integration tests for vmware_guest_snapshot.
Fixes: #22644
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
Fix adds esxi_hostname as Ansible module argument for user
to define ESXi hostname to deploy VMware vSwitch.
Fixes: #24647
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* In order to maintain a single api call across
netconf and cli transport from module code change
signature of commit api to accept genric args.
* Fix doc string
Empty __init__ will allow us to use python namespaces with all of these
files. That may be something we want to take advantage of for allowign
them to be expanded by user dirs. Also might be needed for AnsiballZ or
other wrapper enhancements in the future.
* Add idempotency and import/export support to zabbix_template
Adds idempotency to the template update functions and check mode,
also adds the ability to dump and import json template
configurations.
* Fix issue clearing groups from template
When an empty list is provided for group names, all groups associations
should be cleared from the template. Previous behavior caused the
template to be associated to all existing groups if an empty list
was provided.
* Fix undefined variable references
* Add example importing template from ansible variable
Document a sample template import with bare minimum structure.
No items or graphs are added, only 1 application is added to the
template.
* Added . and / to rule args regexp
Things like pam_echo.so file=/etc/foo.txt weren't being matched and
causing incorrect change counts. Adding / and . fixed that.
Fixes#33351
* pamd: test argument with value
Relates #33351
Fixes#33406Fixes#33405
* Fix typo in network_cli for sendonly
* Send `abort` to remote device in case configuration fails
* Fix indentation issue in eos_static_route integration test
* Revert network_cli change
All the values currently documented as return values are returned inside a 'result' key.
So if you registered the output of the task as 'output', then you would need to do 'output.result.zone_id' instead of 'output.zone_id'.
This commit fixes that so that you can do 'output.zone_id'.
This fix adds support for hardware parameter 'numCoresPerSocket'
in vmware_guest module. Also, adds integration tests for this change.
Fixes: #20406
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
'true' needs to be quoted as a string, otherwise it is stored as boolean and ends up getting capitalized to 'True' when presented to debconf
Subsequent install of oracle-java8-installer fails with "oracle-license-v1-1 license could not be presented"
ansible version: 2.3.1.0
Actual: value: true
debconf-show oracle-java8-installer
* shared/accepted-oracle-license-v1-1: True
Expected: value: 'true'
debconf-show oracle-java8-installer
* shared/accepted-oracle-license-v1-1: true
Various fixes to correct the BIG-IQ sdk args, and remove common
bigip stuff if requested in bigiq modules. Will move this to
separate module includes at a later time.
* Adding module enos_config and its UT files
* Removing trailing line
* Removing trailing lines
* Editing enos_module.py to fix build errors
* Removing blank lines in end
* Updating enos_config.py based on review comments
* Adding one more blank line
* Removing training white space
* Removing test_enos_config_force method from UT
* Updating documentation
* Comments by John, Remove version_added: "2.5"
* Refactor VyOS to use cliconf
* Use show configuration commands on get_config
* Remove debug statement
* Construct command/answer/prompt if needed and fix commit comments
* Convert command/prompt/answer to bytes
Set hw_guest_ha_state as None if `vm.summary.runtime.dasVmProtection` isn't printable/json-able. So if vm.summary.runtime.dasVmProtection is defined, return
vm.summary.runtime.dasVmProtection.dasProtected.
* check if need update for internal port
* validate port ip
* os_router modified in local
* my_os_router.py tested upto port not found
* tested need update
* default port attached with subnet getting deleted
* update happened with subnet and port id but rerun update=true?
* update working with portid converted subnetid for match checking
* tested and worked
* extra debug commnets cleaned up
* os_router with port ip tested fine
* deleted test files used wq for my development
* interface type changed for backward compatibility
* check if need update for internal port
* validate port ip
* os_router modified in local
* my_os_router.py tested upto port not found
* tested need update
* default port attached with subnet getting deleted
* update happened with subnet and port id but rerun update=true?
* update working with portid converted subnetid for match checking
* tested and worked
* extra debug commnets cleaned up
* os_router with port ip tested fine
* deleted test files used wq for my development
* check if need update for internal port
* validate port ip
* os_router modified in local
* my_os_router.py tested upto port not found
* tested need update
* default port attached with subnet getting deleted
* update happened with subnet and port id but rerun update=true?
* update working with portid converted subnetid for match checking
* tested and worked
* extra debug commnets cleaned up
* os_router with port ip tested fine
* deleted test files used wq for my development
* interface type changed for backward compatibility
* interface type changed for backward compatibility
* restoring requirement.txt which was deleted accidentally
* isinstance instead of type and white space removal
* trailing spaces removal
* multiple space after keyword 379,441
* fail.json interface type and deug msg changes
* test for membership should be 'not in'
* reorder interfaces handling for force=no, making sure it works when no interfaces are specified in the module parameters
when no interfaces are specified on update, use existing interfaces obtained from API.
check whether visible_name is set in check_all_properties; if not set as module parameter, no comparison is necessary.
Check if description is set as module parameter before comparing as well
* link_templates need the same treatment
* add inventory update checks and simplify update procedure
* make specifying proxy optional on update (keeping it as is when not specified), as well
* pep8 fixes
* add tls_*-checks for updates and make tls_*-options actually optional
* Add netscaler_nitro_request module
* Make changes as requested.
* Fix whitepsace in EXAMPLES block.
* Set module changed status according to operation performed.
* Added support to Datacenter resources in HPE OneView
* Adjusting comments in oneview_datacenter_facts
* Adding no_log on the documentation
* Using Pytest to Oneview DatacenterFactsModule tests
This fix adds debugging details for 'no folder found' error.
This will allow to debug the user's setup easily.
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
Currently the check() method for idempotence only assumes the public
key is under the form of a PEM file when its not always the case.
The module openssl_publickey allows one to generate OpenSSH format
publickey. This leads to idempotence not being detected.
Removing 'md5' checksum checking as simply comparing current and desired publickey does the expected job.
Signed-off-by: Satyajit Bulage <sbulage@redhat.com>
* Warn on tests used as filters
* Update docs, add aliases for tests that fit more gramatically with test syntax
* Fix rst formatting
* Add successful filter, alias of success
* Remove renamed_deprecation, it was overkill
* Make directory alias for is_dir
* Update tests to use proper jinja test syntax
* Update additional documentation, living outside of YAML files, to reflect proper jinja test syntax
* Add conversion script, porting guide updates, and changelog updates
* Update newly added uses of tests as filters
* No underscore variable
* Convert recent tests as filter changes to win_stat
* Fix some changes related to rebasing a few integration tests
* Make tests_as_filters_warning explicitly accept the name of the test, instead of inferring the name
* Add test for tests_as_filters_warning
* Update tests as filters in newly added/modified tests
* Address recent changes to several integration tests
* Address recent changes in cs_vpc
locale.setlocale() call removed in 6b5291d68f150c629e9958bb6e910b529b0d8cef
is actually needed by time.strptime(). AnsibleModule() changes both: environment
variables and python level locale settings so both need to be reset.
All crypto modules uses file common arguments to specify generated file
permissions. This commits aims to add the extends_documentation_fragment
in the doc so it is automatically stated.
This fix allows user to specify resizefs in logical volume extension.
Fix placement of new option, document.
Signed-off-by: Tim Rightnour <root@garbled.net>
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
Currently during the check phase, the code considers the file to be
a public key if the file exist - which is not necessarily true.
This commits aims to ensure that the file is actually a publickey else
returns false for the check.
* add type manipulation
* update for py3
* add tests for list to dict
* Add dict to list tests
* Update tests to search for regex in response
* pep8 clean up
* update Exception for py3
* update test to be py2/3 compat
* update for py26 compat
* potential fix for py3 and py26
* potential fix for py3 and py26 take2
* add new line to kick off shippable
* remove cache file created
* fix filter name
* add space for shipable
* Fix junos integration test fixes as per connection refactor (#33050)
Refactor netconf connection plugin to work with netconf plugin
* Fix junos integration test fixes as per connection refactor (#33050)
Refactor netconf connection plugin to work with netconf plugin
Fix CI failure
Fix unit test failure
Fix review comments
* add availability set for vm
* add test
* add import
* fix
* add test assert and output
* fix lint and version added
* add null check
* fix mirror
* fix mirror
* Unifying wording and formatting of all include and import modules
* Changes based on comments from dharmabumstead
* Removed instances of the term ‘Ansible Engine’
* Removed instances of term ‘Ansible Engine’
* Updated term
* Updated wording
* Updated wording
* Removed the term ‘Ansible Engine’
* Adding aliases for field attributes and renaming async attribute
As of Python 3.7, the use of async raises an error, whereas before the use
of the reserved word was ignored. This adds an alias field for field attrs
so that both async and async_val (interally) work. This allows us to be
backwards-compatible with 3rd party plugins that may still reference Task.async,
but for the core engine to work on Py3.7+.
* Remove files fixed for 'async' usage from the python 3.7 skip list
* Allow the user to circumvent adding -tt on ssh commands to help aid in
debugging ssh related problems.
* Move config to the plugin
* Set version_added
* Change yaml section to "connection"
* Fix ssh unit tests
* use less intrusive algorithm for syncing cs_policybindings
* fix some pylint and pep issues
* fix one other pylint and pep issue
* fix two lines between methods
This change will now track any created persistent connection and shut it
down at the end of the play run. This change also includes an update to
properly honor the reset_connection meta handler.
* Add a 'validate' parameter to the juniper_package module to optionally skip checking configuration compatibility against the JUNOS package being installed
* Fixing CI failure - E309 version_added for new option (validate) should be 2.5
* Revert previous change and add version_added to 'validate' parameter
* Improve error message in cloudscale_server module
Fix punctuation and add the full contents of "info" to the output in
case of failed API calls. This is useful in case of connection timeouts
and other error conditions where there is no response body available.
* Increase timeouts in cloudscale_server module
Increase the timeouts to not fail in case the API calls take a bit
longer than usual. The default timeout of fetch_url is 10s which is
quite short. Increase it to 30s. The timeout for waiting for a server
change is increased as well as it calls the API in a loop. Therefore
this value should be larger than the API timeout.
* Send API parameters as JSON in cloudscale_server module
Use JSON to send the POST data to the API instead of an urlencoded
string. Urlencoding is not really a good match for some Python
datatypes.
This fixes an issue when submitting a list of SSH keys which did not get
translated properly.
* Fix typo in cloudscale_server documentation
* cloudscale_sever: Replace timeout const by api_timeout param
Replace the static TIMEOUT_API constant by a user configurable
api_timeout parameter. Also eliminate the TIMEOUT_WAIT constant by
2*api_timeout. This means that the timeout to wait for server changes is
always double the timeout for API calls.
* Use Debian 9 image for cloudscale_server tests
Currently it's reporting an inverted version number about the
python library and it shouldn't be. Also it's currently claiming
python2 as a requirement, which it is not.
Signed-off-by: Adam Miller <maxamillion@fedoraproject.org>
* fix for breaking metadata change in various Azure Python SDK bits; some members were marked `readonly` for validation, which the default msrest serializer ignores. Added `keep_readonly` flag to serializer call to ensure they're preserved.
* win_updates: removed scheduled task to use become instead
* updated docs to remove scheduled task info
* fix issue with only installing last update in group
* jsonify inventory
* smarter import, dont pass kwargs where not needed
* added datetime
* Eventual plan for json utilities to migrate to common/json_utils when we split
basic.py no need to move jsonify to another file now as we'll do that later.
* json_dict_bytes_to_unicode and json_dict_unicode_to_bytes will also
change names and move to common/text.py at that time (not to json).
Their purpose is to recursively change the elements of a container
(dict, list, set, tuple) into text or bytes, not to json encode or
decode (they could be a generic precursor to that but are not limited
to that.)
* Reimplement the private _SetEncoder which changes sets and datetimes
into objects that are json serializable into a private function
instead. Functions are more flexible, less overhead, and simpler than
an object.
* Remove code that handled simplejson-1.5.x and earlier. Raise an error
if that's the case instead.
* We require python-2.6 or better which has the json module builtin to
the stdlib. So this is only an issue if the stdlib json has been
overridden by a third party module and the simplejson on the system
is 1.5.x or less. (1.5 was released on 2007-01-18)
* AWS S3: fix method call for fakes3 S3 backend
Fixes#33083
Signed-off-by: Marc-Aurèle Brothier <m@brothier.org>
* Auto append port based on proto
Signed-off-by: Marc-Aurèle Brothier <m@brothier.org>
This fix adds ability to set MAC address maunally. Before adding
any MAC address, the value is validated. If value is not valid, then
MAC address is set to vCenter generated MAC address.
Also, added integration tests for this change.
Fixes: #21161
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Add new filter to parse xml output for network use cases
Fixes#31026
* Add parse_xml filter
* Add documentation for parse_xml filter
* Edited for clarity.
* Fix review comment and add unit tests
* Fix unit test CI failure
* Fix CI issues
* Fix unit test failures
* Fix review comments
* More copy edits.
* Adding RPC attribute arguments to `junos_rpc` network module.
* Specifying module argument version.
* Fixing DOCUMENTATION block.
* First attempt at new test fixture.
* Updated RPC_CLI_MAP.
* Use `result` instead of `reply`.
- authorize was not working as expected
- use end command to get to exec context instead of exit
- error due to mishandling of global variable _DEVICE_CONFIG
