* adding possibility to specify resource group for referred virtual network
* fixed sanity issues
* removed trailing whitespace
* added test
* fixed documentation
* try to fix unstable test
* Tidied up the description of virtual_network_resource_group
* adding possibility of disabling public ip address
* fixed indent
* fixed whitespace
* fixed mistake
* try to create test with vm without public ip address
* try to fix test
* another attempt for test
* fixing test
* create vm with no ip with different name and delete it immediately
* a few additional fixes
* another attempt to pass test
* must be deleted
* simplified no ip test
* reorganised tests
* Wrapped choice in C()
* fixed issue when public ip address should not be created
* adding test for public ip address
* fixed samples
* another fix to sample formatting
* fixed test
* fix test
* fixed test
* another attempt to fix test
* maybe it works now
* still wrong
* improved check per customer request
* removed stupid semicolon
* updated test to match main scenario
* changed ip configurations to list
* another attempt
NSO verify did not handle leaf-list value verification in 4.5 and
later due to changes made for configuration writing made.
map prefix for identityref types in verification.
NSO operations can take much longer than 10 seconds as they operate on
real network equipment, set default timeout to 5 minutes and allow for
user override.
* Fix redundant yaml error blurbs on ModArgs parse errors
Some of the AnsibleParserErrors from parsing.mod_args
are created with the obj=some_yaml_ds options but
some are not.
If they were, we don't want to add another yaml_ds to
it, because that will result in double yaml error blurbs.
And since we dont need to add info, we can just re raise it.
But if there is no ._obj, add it here so we get the extra
detail in the error message (see issue #14790) and raise
a new AnsibleParserError instance.
Fixes#36848
* cleanup existing test_tasks pep8/sanity issues
* Clean up Grafana docs a bit
But more is needed, default values, missing choices, proper
descriptions, actual sentences :-)
* Remove validate-modules entries
* add additional test coverage for tower modules
* add test coverage for the tower_credential module
* add test coverage for the tower_user module
* fix a bug in py3 for tower_credential when ssh_key_data is specified
* add test coverage for tower_host, tower_label, and tower_project
* add test coverage for tower_inventory and tower_job_template
* add more test coverage for tower modules
- tower_job_launch
- tower_job_list
- tower_job_wait
- tower_job_cancel
* add a check mode/version assertion for tower module integration tests
* add test coverage for the tower_role module
* add test coverage for the tower_group module
* add more integration test edge cases for various tower modules
* give the job_wait module more time before failing
* randomize passwords in the tower_user and tower_group tests
* Check that connection error msg are not unsafe
* Connection error messages are unsafe: wrap them
For example, in case of error, docker connection plugin returns exception
message containing Go template. These messages weren't tagged as unsafe
and were consequently rendered:
The conditional check 'result is failed' failed. The error was:
{
'msg': u'Docker version check ([\'/usr/bin/docker\', \'version\', \'--format\', "\'{{.Server.Version}}\'"]) failed: Got permission denied while trying to connect to the Docker daemon socket at unix:///var/run/docker.sock: Get http://%2Fvar%2Frun%2Fdocker.sock/v1.35/version: dial unix /var/run/docker.sock: connect: permission denied\n',
'failed': True
}:
template error while templating string: unexpected '.'.
String: Docker version check (['/usr/bin/docker', 'version', '--format', "'{{.Server.Version}}'"]) failed: Got permission denied while trying to connect to the Docker daemon socket at unix:///var/run/docker.sock: Get http://%2Fvar%2Frun%2Fdocker.sock/v1.35/version: dial unix /var/run/docker.sock: connect: permission denied
* eos can not check config without config session support
* add testcase for check_mode without config session
* fix eos eapi to read use_session env var
Fixes#36979
If `abort` is not issued in the top level session prompt
the existing session goes to pending state.
The fix is to come out of config mode by issuing `end` command
and again to same config session and execute `abort` which
`abort` is issued at the top level session prompt.
* Fix type hint typos.
* Add one-time cloud env setup after delegation.
* Add generate_password to util.
* Add username/password support to HttpClient.
* Avoid pip requirement for ansible-test shell.
* Support provisioning Tower instances.
* allow ANSIBLE_KEEP_REMOTE_FILES for local test runner
* add ANSIBLE_KEEP_REMOTE_FILES to tox.ini, update docs
* Clarify handling of environment variables.
Fixes#35993 - Changes to update_size in commit eb4cc31 made it so
the group dict passed into update_size was not modified. As a result,
the 'replace' call does not see an updated min_size like it previously
did and doesn't pause to wait for any new instances to spin up. Instead,
it moves straight into terminating old instances. Fix is to add batch_size
to min_size when calling wait_for_new_inst.
Fixes#28087 - Make replace_all_instances and replace_instances behave
exactly the same by setting replace_instances = current list of instances
when replace_all_instances used. Root cause of issue was that without lc_check
terminate_batch will terminate all instances passed to it and after updating
the asg size we were querying the asg again for the list of instances - so terminate batch
saw the list including new ones just spun up.
When creating new asg with replace_all_instances: yes and lc_check: false
the instances that are initially created are then subsequently replaced.
This change makes it so replace only occurs if the asg already existed.
Add integration tests for #28087 and #35993.
* Remove default admin_distance and fix the idempotence thereof
Fixes#33290
* Fix tests and use yaml anchors to shorten tests
* Add test for undefined admin_distance
* Read config from `show run` if `show ip static route` fails
* Restore flags to ios.get_config & use get_config where appropriate
False assumption that values can not have cyclic dependencies. Fix by
removing dependency on self and look for cycles, if found remove
dependency to get a partial sort done.
* win_lineinfile: fix#33858. Removed conversion from \r\n
* win_lineinfile: added test for #33858
* win_lineinfile: added documentation and more tests for change
* win_lineinfile: fixed wrong hash in testing
Fix issues in ValueBuilder used in nso_config and nso_verify so that it
can handle leaf-list in NSO 4.5 and detect identityref types from
unions.
Fail gracefully if a type is not found.
* allows ib_spec attrs to be filtered in update
This change will allow the ib_spec entries to be be filtered on a change
object by setting the update keyword to false. The default value for
update is true. When the update keyword is set to false, the keyed
entry will be removed from the update object before it is sent to the
api endpoint.
fixes#36563
* fix up pep8 issues
This fix adds datastore cluster details about datastore in returning
facts. Updated documentation and tests.
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Decouple config and state check in {network_os }_vlan and { network_os }_vrf modules
Fixes#35567Fixes#34754
`interfaces` option is used for configuration as well as operational state
check. If interface is configured to given vlan or vrf but if
operational state of interface is disabled it results in module failure.
Fix is to decouple same option usage for config and state.
With this fix `interfaces` is used as config option and a new
option named `associated_interfaces` will be used for intent check
for assigned interfaces.
* Fix CI failures
* Fix review comment
* Fixed integration test failure
* ACI: Various changes to module documentation and guide
This PR includes:
- We moved the object class information to the notes
- Add version information to guide chapters
- Add generic note to modules with reference to ACI guide
- Reference known issues in aci_rest documentation
- Remove module_utils function docs from modules
- Indicate which parameters are not required for querying all objects
- Added missing RETURN information
* Fix copyright strings
* Remove aci_domain_to_encap_pool.py for v2.5
* More updates
* PEP8 fix
* Improve listings of parameters/return values
* Adding support for vApp properties.
* vm specification updated only if changes have to be applied. I.e. subsequent updates with the same data will not trigger changed state
* Auxiliary variables renamed, hope this makes the code more readable
* Integration tests changed - re-adding the same properties test not implemented, but tested on real vCenter deployment
* fixing documentation "version_added" for the feature
* Addressing reviewers comments #2:
* documentation updated with the only meaningful value for "option" attribute - "remove"
* Fixed improperly handled case when user requested "add" operation for existent property
* vApp configuration is updated only with properties that contains changes, not with all properties requested by user
* aci_spvpg: Various fixes to integration tests/modules
This PR includes:
- A fix in module_utils aci.py
- Various fixes in integration tests
* Fix typo
* Bug in del(list) logic. Say you have a list of 4 elements a[0-3]
and you have to remove index 1 and 3, if you remove index 1 first
then list is cut short a[0-2] and does not have index 3
Fix: Remove indexes in reverse sorted order e.g. 3 and 1 in above
example so that order of indexes remain preserved even after deleting
fix is to remove indexes in reverse sorted order
* Add test cases for failed case
This PR includes:
- A fix for a recently introduced issue wrt. error handling
- Added integration tests for provoked errors
- Influence standard return values using aci library for aci_rest
- Add proxy support documentation
- Documentation update related to #34175
Remove module from ignore lists and some documentation fix in
digital_ocean_block_storage and digital_ocean module.
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* fix nxos_l3_interface tests as n35 doesn't support ipv6
* add terminal dont-ask to nxos_feature and nxos_lldp
* put interfaces in L2 mode for N35
* fix nxos_feature unit-tests
This fixes, cloning operation where template or existing VM
does not have network or DVPG. Also, adds some strict type checking in
network parameters.
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
This PR includes:
- Rename 'protocol' parameter to 'url_protocol'
- Add limited integration tests (as we have no public firmware access)
- Add missing examples
* Ensure we merge doc fragments early, for comparisons
* Perform boolean conversion from arg_spec data too
* Update valdiate-modules ignore.txt due to recent changes
The modules in this patch include waits that need to happen to ensure
something is correctly configured on a BIG-IP. These waits were
raised as an issue in a recent ansible-testing meeting.
This patch eliminates the waits by mocking time.sleep
Start using this to construct shade OpenStack Cloud objects in a
consistent manner. This will let us centralize things like dealing with
password arguments and whatnot. It also allows us to introduce the
ability to pass a fully formed config dict directly to the module.
Migrate all OpenStack modules to use openstack_cloud_from_module.
Have it return the shade library since it's responsible for
importing shade and shade is needed for the exceptions.
Only pull specific OpenStack arguments for the constructor
Rather than passing **module.params to the shade constructor, pull out
only the values that make sense. This should prevent the issues with
module parameters stepping on shade parameters.
Replace module.params.pop with module.params.get
We don't need to pop these anymore since the shade constructor is now
using opt-in values.
Using real urls is ungood. Use example.com domains. Also, get rid of the
antiquated port numbers.
* added support for --testcase flag in ansible-test
* fixed command format
* added tab completion
* fixed sanity issues
* added documenation for --testcase
* don't autocomplete when multiple modules are selected
When ACI modules are being used for querying MOs, we should not return
the previous state, as there is no previous state, there's only the
current state.
This impacts a lot of tests that were used to testing the current state
as 'previous'.
We identified an incompleteness to parameter dependencies that affects
querying all domain-related objects.
This PR also includes:
- Improvements to integration tests
- Add missing vm_provider types
- Fix examples
This relates to #36131
This PR includes:
- A fix to the module where domain_type without domain caused havoc
- A fix to the integration tests when querying all binding objects
- Improvements to integration tests
* Added metrics_collection management to ec2_asg module to switch ASG metrics on and off.
* Fixed typo in documentation of ec2_asg module
* Removed extra blank line in ec2_asg.py
* Docs fixes for ec2_asg module
* Added integration test for ec2_asg metrics flag
* Trying different syntax for ec2_asg test
* Fix vrf parsing in eos_vrf and eos_eapi module
Fixes#30250
Fix logic to parse vrf when interface value in `show vrf`
command output spans on multiple lines
* Add idempotent test case
* Revert "commented out check tests (#35788)"
This reverts commit 3df2561405.
* `discard_changes()` now uses `exit discard`
instead of just `discard`. Also a slight tweak to avoid a second `exit` after
`exit discard`
* hardcoded API profiles in azure_rm_common
* changed azure_rm_securitygroup module to use api_profiles, dynamic models, kwargs on all SDK methods
* changed azure_rm_containerinstance module to use api_profiles, dynamic models, kwargs on all SDK methods
* fixed polling performance issue in azure_rm_securitygroup (default poll interval was 30s)
This PR includes:
- Fixes related to the recent merge of #31637 and #34537
- A generic fix for a reference for assignment issue
- Fixes to aci.boolean() in order to catch exception
copy currently fails if you specify a destination without any directory
component. This is because we take the dirname of the destination for
some processing and no dirname causes issues.
This corrects that by prepending "./" if there is no directory component
in dest.
* basic: allow one or more when param list having choices
* add unit tests
* optimize a bit
* re-add get_exception import
* a number of existing modules expect to be able to get it from basic.py
* Fixing eos_config save option. Was removed when deprecated. Fixing other deprecation documentation. Adding unit tests.
* Fixing removed_in_version for force.
* [git] Fix fetching branch of shallow clone
* Use absolute file:// paths to make sure git uses shallow clones
* Improve tests
* Fix sanity errors
* Match style according to other (depth) tests
* Improve tests
Now they will fail without the fix of this PR
* New module - elb_target
* Work to add deregister functionality
* Add jurajseffer work on waiting for status change
* List the set of statuses as a choices list
* default target_status_timeout is 60
* Add 'unavailable' as a target status choice per API docs
* Add support to remove targets that are in unused state
* add support for availability zone selection
Fix deregistering targets from used target groups
Fix waiting for unused state for targets that have started deregistering
This fixes a bug when parent's local vars where not available in nested
includes. The bug can only be seen with jinja>=2.9 which changes
how the variable scopes work.
Fixes#34886
* Wildcard imports should be taken care of. Enable the pylint check for them
* Remove wildcard import code-smell test as we're now checking via pylint
* Add unused-wildcard-import as ignored in our compat code.
These three files use wildcard imports so that they can export
symbols in a compatible location. The real code lives elsewhere.
So disable the pylint tests for the relevant sections of code.
* aws ssm parameter lookup test case - fails demonstrating no exception when parameter missing
* aws ssm parameter lookup - fail in case parameter doesn't exist
* aws ssm parameter lookup test case - failing case for nice return from path lookup
* aws ssm parameter lookup - convert incoming taglist to a key-value dictionary
* aws ssm parameter lookup - pep8 / style clean up
* aws_ssm lookup plugin rewrite for more standard interface
* aws_ssm module and lookup - introduce integration test and fix:
* aws_ssm module and lookup - error case integraton test and many PEP8 and other cleanups
* aws ssm parameter lookup - Various fixes in response to review + recursive fix & test
* aws ssm parameter lookup - more in response to review - shertel/abadger
* aws ssm parameter lookup unit test - move to mocker according to abadger
* aws ssm parameter lookup - integrate with new documentation fragment
* aws ssm parameter lookup - accept either aws_profile or boto_profile
* aws ssm parameter lookup - eliminate lookup document fragment until env vars are fixed later
* Add fat filesystem support
fatresize is temporarily disabled
* Refactor Filesystem.get_dev_size
For more sharing with vFAT class
* Fix filesystem tests on some OSs
I think this is due to older mke2fs on those systems.
* Fix vFAT command on FreeBSD
newfs doesn't seem to work on image files
* Refactor filesystem.grow()
Split out grow_cmd generation and Device operations
* Use swap as unsupported filesystem
Except FreeBSD, which doesn't have mkswap
* Be consistent about str(dev) vs dev.path
Prefer str(dev), this works transparently with '%s' formatting.
* Enable vfat resize, only test fatresize >= 1.0.4
Lower versions have a segfault bug.
* Only install fatresize where available
FreeBSD, OpenSUSE, RHEL and CentOS < 7 don't ship it.
* updates to azure_rm_keyvault
* updates to azure_rm_keyvault
* updates to azure_rm_keyvault
* updates to azure_rm_keyvault
* updates to azure_rm_keyvault
* updates to azure_rm_keyvault
* updates to azure_rm_keyvault
* updates to azure_rm_keyvault
* updates to azure_rm_keyvault
* updates to azure_rm_keyvault
* updates to azure_rm_keyvault
* updates to azure_rm_keyvault
* updates to azure_rm_keyvault
* fix update bugs, add update test
This fix adds a verbose message about non-existent VM when specified
with operation, due to idempotency we can not detect correct state.
Fixes: #27384
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* ACI: Change result output as discussed
* Update all modules to use new aci.exit_json()
* Update output_level spec and docs
* Fix integration tests
* Small PEP8 fix
* Asorted fixes to tests and aci_rest
* More test fixes and support for ANSIBLE_DEBUG
* Fix another PEP8 issues
* Move response handling inside ACI module
* Reform of ACI error handling and error output
* Diff multiline json output
* Fix a few more tests
* Revert aci_bd tests
* Small correction
* UI change: existing->current, original->previous
* UI change: config->sent
* Update all modules with RETURN values
* Fix a few more tests
* Improve docstring and add 'raw' return value
* Fix thinko
* Fix sanity/pep8 issues
* Rewrite unit tests to comply with new design
* Fix over-byte
* Update ios tests to call `provider`
To continue to support testing `connection: local`
* Fix command dict handling in ios_user
* Clean up unit tests, too
* Insert lines before or after when the regexp exists elsewhere in the file
* Correct filter syntax in lineinfile integration test
* Use multi-line YAML syntax on lineinfile tests
Unify indentation
* Add lineinfile tests for same line matched to different regexps
* Remove debug statement from test
* aci_aaa_user: Manage AAA users on ACI fabrics
* Fix module documentation
* Ensure we allow to not set accountStatus and expires
* Added aaa_password_lifetime and aaa_password_update_required support
* Improvements to integration tests in light of issue 35544
* Fix ACI ISO 8601 formatted string
* Add HAS_DATEUTIL
We introduced the new loop keyword as a replacement for with without
adding tests that it behaved as we expected. This test asserts that
behaviour.
Incidentally, it also shows how to use parameters with lookups and loops
now.
* Test for include_tasks & include_role bug
Related to ansible/ansible:#21890
* Fix nested include_tasks called from role
This fixes the path of included files when you want
to call include_task inside a role's task file and this
role is itself called from multiple level of playbook include_tasks
Related to ansible/ansible:#21890
This fixes ansible/ansible:#35109
* ec2_group: fix ipv6 tests to use an explicit VPC
* otherwise would fail on old AWS accounts supporting EC2-classic
* ec2_group: fix tests to use an explicit VPC
* Only run some tests if there is a default vpc associated with the account
* galaxy remove incorrect check for role path before extraction
Fixes#35217
Currently lib/ansible/galaxy/role.py checks roles_path and will
ignore paths that don't currently exist which it should not because
the path will attempt to be created by the role extraction process
(which is valid and expected behavior) and if unable to write at the
time of role extraction into the role_path, that error will be
handled properly at that point in the process.
Signed-off-by: Adam Miller <admiller@redhat.com>
* add test case for galaxy install with rolefile and rolepath
Verify we don't regress GitHub Issue #35217
Signed-off-by: Adam Miller <admiller@redhat.com>
* fix the integration test
Signed-off-by: Adam Miller <admiller@redhat.com>
* double quote for shellcheck glob warning
Signed-off-by: Adam Miller <admiller@redhat.com>
* fix galaxy install tests to not need remote resources
Signed-off-by: Adam Miller <admiller@redhat.com>
* make shellcheck sanity tests happy
Signed-off-by: Adam Miller <admiller@redhat.com>
* prep git global conf for running the galaxy install tests in docker
Signed-off-by: Adam Miller <admiller@redhat.com>
* move ansible-galaxy tests into their own target, make git conf non-global
Signed-off-by: Adam Miller <admiller@redhat.com>
* fix up tests based on feedback
Signed-off-by: Adam Miller <admiller@redhat.com>
* remove extra newline from aliases file
Signed-off-by: Adam Miller <admiller@redhat.com>
* Revert model and serialnum to older version
* Add stacked versions of model and serialnum as separate facts
* Add unit test to check stacked output
* Alter model regex to address #34768
Enforce module deprecation.
After module has reached the end of it's deprecation cycle we will replace it with a docs stub.
* Replace deprecated modules with docs-only sub
* Use of deprecated past deprecation cycle gives meaningful message (see examples below)
* Enforce documentation.deprecation dict via `schema.py`
* Update `ansible-doc` and web docs to display documentation.deprecation
* Document that structure in `dev_guide`
* Ensure that all modules starting with `_` have a `deprecation:` block
* Ensure `deprecation:` block is only used on modules that start with `_`
* `removed_in` A string which represents when this module needs **deleting**
* CHANGELOG.md and porting_guide_2.5.rst list removed modules as well as alternatives
* CHANGELOG.md links to porting guide index
To ensure that meaningful messages are given to the user if they try to use a module at the end of it's deprecation cycle we enforce the module to contain:
```python
if __name__ == '__main__':
removed_module()
```
* Add aws_ses_identity module
* Update CI alias, add BotoCoreError exception handling.
* Add SES and SNS permissions to hacking/aws_config to run aws_ses_identity integration tests
This adds a new module called vmware_vm_vm_drs_rule. This module add
affinity/antiaffinity rule for VM-VM in given cluster.
Fixes: #32109
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* refactors nios api shared code to handle provider better
This change refactors the shared code to be easily shared between
modules, plugins and dynamic inventory scripts. All parts now implement
the provider arguments uniformly.
This also provides a centralized fix to suppress urllib3 warnings coming
from the requests library implemented by infoblox_client
* fix up pep8 errors
* fix missing var name
* use tests instead of filters
* Don't check 'rc', use success/failed tests
- yum module use 'fail_json' which set 'failed'
- 'rc' is for backward compatibility:
bbd6b8bb42/lib/ansible/executor/task_executor.py (L571)
- besides yum module doesn't document any return values
* Allow to run tests twice in a row
ansible-test is executed with '--retry-on-error' switch, then tests must
be able to executed twice in a row.
Error was:
TASK [yum : install group] ***
ok: [testhost] => {
"attempts": 1,
"changed": false,
"failed": false,
"invocation": { [...] },
"msg": "",
"rc": 0,
"results": []
}
TASK [yum : verify installation of the group] ***
fatal: [testhost]: FAILED! => {
"assertion": "yum_result.changed",
"attempts": 1,
"changed": false,
"evaluated_to": false,
"failed": true
}
ecs_taskdefinition_facts should not populate ansible_facts with
so much information.
Better to just return the contents of the dict directly.
Reduce line lengths, use AnsibleAWSModule, don't reimplement
camel_dict_to_snake_dict.
* Adding new code for new module and new module_utils with the pip pyfmg package
* Changed login and logout functionality and renamed mod_utils file as well as cleaned up PEP8 syntax
* Removing extra Ansible parameters and fixing more syntax issues
* Fixing more syntax issues and comparing against previous FTNT script module
* Changing import location to pass syntax checks
* Fixing pylint errors
* Removing test files
* Add unit tests and enabling a login session check within main in order to throw error if network connection exception
* Fixing syntax issues for adding unit tests
* Changing case for pip package requirements
* adding comments
* adding version restriction on pip package for testing
* adding version restriction on pip package for testing
* More comments
* Fixing documentation errors and add the ability to skip a test if it isn't present
* Fixing Pep8 error with whitespace (tab) in the row
* New module: ec2_vpc_egress_igw
* minor pep8 fix and doc update
* add test dir and files
* add tests for gateway module
* fix up return documentation per review
* remove HAS_BOTO3 stuff as it is handled in AnsibleAWSModule per review
* fix an error with failure message and add custom handler for non-existent vpc ID
* add additional tests and update tests per review
* ignore errors on clean up tasks
* update module copyright to newer format
* fix exception handling since BotoCoreError doesnt have response attribute
* actually fix exception handling this time so it works with Py3 as well
* Module to generate Diffie-Hellman parameters
Implements #32577
* Add integration tests for openssl_dhparam
* Slightly refactor check to prevent unnecessary regeneration
* Fix code smell in tests
Highly annoying to have to do this again and again and again as the rules change during the game
* Using module.run_command() and module.atomic_move() from a tempfile.
* Remove underscore variable
Ansible prefers dummy
* fix broken import
Error was:
lib/ansible/modules/cloud/azure/azure_rm_dnsrecordset.py:223:0: NameError: name 'ARecord' is not defined
* doc: use formatting functions
* remove unused dict
* Skip parameters that are being deprecated
So in most cases when parameters are deprecated, you may not want to
advertise them in the documentation. One reason for this is because
these parameters were not introduced within Ansible but predate
upstreaming them.
So this change avoids reporting parameters that are not documented and
are deprecated. It's only a small subset of the existing E322 errors.
* Add support for E323 with these changes
* Unsure about the other issues now
* Add better error message with E321
* Restore some erroneously remove files
* Readd false positives to ignore.txt
* Admin account is not always called Administrator (eg Azure)
* this fixes some, but not all issues related to the Administrator account on non-English Windows as well (still numerous references to "Administrators" and other en-US Windows group names)
* Add missing pylint test for invalid path.
* Fix syntax in integration test.
* Use Write-Output in win_script test script.
* Fix pylint in explain mode.
* Don't skip an inventory source just because it has a comma, make sure it's also doesn't exist as a path. Fixes#34931
* Add integration test for inventory path with commas
* * Changes to enable network_cli and netconf on modules.
* limits connection local for single TC per playbook.
* * adds a note on why only 1 TC is executed with connection: local
* updates to azure_rm_sqldatabase
* updates to azure_rm_sqldatabase
* updates to azure_rm_sqldatabase
* updates to azure_rm_sqldatabase
* updates to azure_rm_sqldatabase
* updates to azure_rm_sqldatabase
* updates to azure_rm_sqldatabase
* updates to azure_rm_sqldatabase
* updates to azure_rm_sqldatabase
* updates to azure_rm_sqldatabase
* updates to azure_rm_sqldatabase
* updates to azure_rm_sqldatabase
* updates to azure_rm_sqldatabase
* updates to azure_rm_sqldatabase
* updates to azure_rm_sqldatabase
* updates to azure_rm_sqldatabase
* updates to azure_rm_sqldatabase
* updates to azure_rm_sqldatabase
* updates to azure_rm_sqldatabase
* updates to azure_rm_sqldatabase
* updates to azure_rm_sqldatabase
* updates to azure_rm_sqldatabase
* updates to azure_rm_sqldatabase
* support the mutilple ip configuration
* Update azure_rm_networkinterface.py
* add test
* fix spell
* make the virtual network name more flexiable
* add test
* fix
* fix lint
* add test
* fix parameter
* deprecate the flatten ip configuration
* fix lint
* fix encoding
* fix mirror
* fix
* load model from common
* ecs_ecr: Remove registry ID from create repository call
[Boto3 documentation][1] specifies 'repositoryName' as the only expected
argument. The `**build_kwargs(registry_id)` part also adds 'registryId' which,
when executed, fails with: 'Unknown parameter in input: “registryId”, must be
one of: repositoryName'.
[AWS API documentation][2] also lists only the 'repositoryName' parameter. I.e.
this is not a problem with the boto3 library.
The default registry ID for the account that's making the request will be used
when creating the rpository. This means that if the `registry_id` specified by
the user is different from the default registry ID, then the policy changes
following the repository creation would fail, because the repository will have
been created in one repository but subsequent calls try to modify it in
another. Added a safeguard against this scenario.
[1]: https://boto3.readthedocs.io/en/latest/reference/services/ecr.html#ECR.Client.create_repository
[2]: https://docs.aws.amazon.com/AmazonECR/latest/APIReference/API_CreateRepository.html
* Fix concurrent ECR integration tests
If the `ecr_name` is the same in multiple concurrent test runs, then they can
interfere with one another causing both to fail. The `resource_prefix` is
guaranteed to be unique for different jobs running in CI an so avoids this
issue while also making it easier to identify the test which created the
resource.
* Remove compat code for to_unicode, to_str and to_bytes
Code was marked as deprecated and to be removed after 2.4
* Remove is_encrypted and is_encrypted_file
Code was marked as deprecated after 2.4 release.
* Add identifier option to apache2_module
There is a convention connecting the name passed to a2enmod and the one
appearing in apache2ctl -M. Not all modules follow this convention and
we have added a growing list of implicit conversions.
As a better long-term solution this adds an "identifier" option to be
able to set both strings explicitly.
* Run debian-specific tests only there
* Improve cleanup after apache2 tests
This is a follow-up/extension of https://github.com/ansible/ansible/pull/33630
* Add example for the new identifier option
* Put all debian tests in a block
* Imported lookup plugin from Role
* Plugin cleanup, including:
* Use existing Python YAML parsing
* Remove environment variables as connection options
* Added initial debugging information
* Reworked the lookup plugin using the Python Request library. As it's available through Ansible, it makes communication with Conjur much more straight forward.
* Removed un-used libraries
* Fixed linting issues
* Standardized output on `format` and insure it works for 2.6, 2.7, and 3.x.
* Use quote_plus from the six library for improved python 2/3 behavior.
* Refactored identity & configuration to prefer user's file. This also includes a refactor to remove an un-needed dictionary merge method.
* Removed `requests` in favor of `ansible.module_utils.urls`.
* Refactored netrc loading to warn if host is not present.
* Tests and a refactor to support easier testing.
* Added reference to website
* Fixed two linting errors
* Fixed an extra line found by linting
* Updated file write to use binary to insure config files are written correctly
* Resolved linting issues
* Refactored config & identity loading to take advantage of plugin options
* Cleanup a bunch of small items caught by linting
* Removed extra line caught by linting
* Swapped in pytest and added some tests with mocked network responses
* Pushing to see if this approach works better...
* Refactored be open_url mocking based on feedback
* Fixed a couple linting issues & refactored mocking into each method to attempt to resolve a failing test
* Use a generic MagicMock for python 2.6
* Fixes doc typo
require -> required
* Use `type: path` in identity_file and config_file
Also removes `expanduser` calls below (which will now be called automatically on
paths.)
* Defines maintainers for conjur_variable plugin
* BOTMETA.yml:
** defines $team_cyberark_conjur as maintainers of Conjur Variable plugin
** adds myself and @jvanderhoof to that team
* Adds URLs to relevant documentation for Conjur Variable lookup plugin
* Clarifies "the server," "the machine" -> "controlling host"
The machine identity used is that of the Ansible controlling host, not any
server being provisioned or instructed. This documentation change aims to make
that relationship clear.
* Adds response code to exception message on authentication failure
* Enhances exception messages to specify the controlling host
These error messages are less likely to confuse a user as to which machine is
associated with the files, identities, and configurations being described.
* Adds ANSIBLE_METADATA for Conjur variable lookup plugin
* UCS LAN Connectivity Policies and integration tests
* Docs updated
* UCS LAN Connectivity Policy and integration tests
* Fix use of description in docs and argument_spec so validate-modules passes
* UCS vNIC templates and integration tests
* docs updated
* UCS vNIC template and integration test
* Update docs and argument_spec for description, mtu, and target.
* win_setup: Add Product ID and Product Key in facts
So this is actually a very nice way to get product key information from
systems collected centrally.
Especially with systems that have been upgraded from Windows 7 or
Windows 8 to Windows 10 may not have a valid Windows 10 product
license key printed anywhere, it was a digital license.
If you ever have to reinstall the system, you may recover the system
from the recovery partition, or the original media, but cannot upgrade
to Windows 10 for free. By collecting the product key, one can always
reinstall your free Windows upgrade.
My only question is, do we want this to be part of the default facts, as
it may be considered important information. Or should we make a special
**win_product_key_facts** ?
* Add ACPI product key support
* Add integration test
* Remove Get-ProductKey function, move inline
aws_ec2 is an inventory plugin intended to replace uses of the `contrib/inventory/ec2.py`
inventory script.
For advanced grouping, please use the `constructed` inventory plugin.
Add deps/requires for fact collectors
Fact collectors can now set a required_facts
class attribute that will be a set of the names
of fact collectors they require to be run first.
ie, if a collector needs to know the ansible_distribution,
it should set it's required_facts to include 'distribution'
required_facts = set(['distribution'])
If a collector requires another collector, it gets added
to the selected collector names.
We then topological sort the ordering of the collectors
so that deps work out (ie, 'distribution' will run before
'service_mgr')
required_facts were added to the collectors for:
- network (requires 'distribution', 'platform')
- hardware (requires 'platform')
- service_mgr (requires 'distribution', 'platform')
Fix name references for facts (need 'ansible_' prefix)
is service_mgr
Fixes#30753
Enforce that there can be only one --new-vault-id or
--new-vault-password-file and use this instead of
--encrypt-vault-id
* Add a config option for default vault encrypt id
This avoids breaking other tests which depend on backports
modules, since the backports.lzma module is currently
incompatible with other backports modules.
The accumulated collected_facts was being update
with new facts _after_ filtering them. So only
facts that pass the filter would ever be passed
to other fact collectors.
For 'filter=ansible_service_mgr', even though it requires
the platform and distribution facts and even collects them,
they would get filtered out and never passed to the other
collectors that need them (service_mgr for ex).
Fix is just to add the unfiltered facts to collected_facts.
Adds unit tests for fact filter and collected_facts.
Fixes#32286
The search string used to look for Clear Linux
was changed in 45a9f96774 to
be more specific, but was too specific. Now finding
a substring match for 'Clear Linux' in /usr/lib/os-release
is enough to consider a match.
Since the details of the full name in os-release varies
('Clear Linux Software for Intel Architecture',
'Clear Linux OS for Intel Architecture', etc) the
search string match was failing and would fall back to the
'first word in the release file' method resulting in
ansible_distribution='NAME="Clear'
Also add a meta fact indicating which search string
was matched.
Test case info from:
https://github.com/ansible/ansible/issues/31501#issuecomment-340861535Fixes#31501
Extract vault related bits of DataLoader._get_file_contents to DataLoader._decrypt_if_vault_data
When loading vault password files, detect if they are vault encrypted, and if so, try to decrypt with any already known vault secrets.
This implements the 'Allow vault password files to be vault encrypted' (#31002) feature card from
the 2.5.0 project at https://github.com/ansible/ansible/projects/9Fixes#31002
People expect to be able to upload files to s3 using standard
locations for files.
Providing an action plugin that effectively rewrites the `src`
key to the result of finding such a file is a great help.
Tests added, and IAM permissions corrected
* First pass at include_role tests
* Reorganize test structure
Do all import and include tests in a single target.
* Build out more tests and test with linear and free strategy for each type
* import_role tests
* Set target host for play test
* Basic import_playbook tests
* Basic import/include_tasks tests
* Add recursion test
* import_playbook tests
* Add import_playbook group_vars test
Issue #33177
* Additional group_var tests for import_playbook
* Enable recursion test
* More work on import_tasks
* Run all tests via run.sh, improve conditional tests, add never tag
Add never tag to certain failining tests and explicitly skip it for now until #34104 is merged. Some tasks need to remain commented out because they cause the entire play to fail and aren't skippable by tags because they are syntax and/or variable checks.
Improve test for whether or not a role was run based on a conditional. Since the [import|include]_role does not register a variable, use a variable that is set inside a role as a canary test for whether or not the role was run.
* Use a fail task rather than trigger a failure via bogus command
This should resolve the "unstable" test results.
* Import tag tests
Fix bug it tests where validate tasks weren't run on tag tests.
Add tests for task import/include with tags.
* Remove test for playbook group_var inheritance
* npm module compatible with npm5
Uses the `--long` flag in `npm list` to get the `missing` key back.
* npm: add integration tests
* npm: test the module with npm 4 as well
* Remove debug tasks, use variables
* Use tests instead of filters
* Adds xcambar as a maintainer of the npm module
* win_iis_webbinding: Fix bug with ipaddress * returning multiple bindings
instead of only the ones defined as *. Address possible future issues around
hostheader * by just disallowing it. Resolves 25473. Added new test for
this case.
Removed all validation for https binding collisions due to difficulty in
validating all cases in which they could or could not collide. As a
result, also removed return values relating to certificate data.
Updated testing and docs appropriately
* win_iis_webbinding: added break to remove binding loops
