Since it depend on libcloud and libcloud requirements include python 2.6
since libcloud 0.4.0 (https://libcloud.apache.org/about.html), which
was released in 2011 Q2, and GCE drivers were added in 2013,
we can't run a libcloud version with GCE support on 2.4.
Since the modules can use a paramiko transport (ergo
python 2.4 syntax), we need to keep compat with 2.4 and python 3,
so we need to use the get_exception trick, even if the various juniper
libraries are not compatible with 2.4.
It currently fail with
ansible/module_utils/facts.py\", line 357, in get_service_mgr_facts\r\nKeyError: 'distribution'\r\n"
Since self.facts['distribution'] is used after, we need to make sure
this is set by default and if needed, corrected somewhere for Linux.
Initialize facts['distribution'] with self.system so that this fact does
not remain uninitialized on systems_platform_working platforms (FreeBSD,
OpenBSD).
Fixes#15841
* Update GCE module to use JSON credentials
* Ensure minimum libcloud version when using JSON crednetials for GCE
* Relax langauge around libcloud requirements
This patch adds the port argument as a valid parameter to the f5_spec.
This argument is supported in bigsuds version 1.0.4 and greater, so
this patch uses the __version__ variable of the bigsuds module to
determine when the port value should be honored by the module.
By default the `Shell` class disables ssh agents. The `junos_netconf`
module uses this class, but doesn't re-enable agents.
Here it's explicitly enabled again, so an ssh agent can be used to
connect to and configure Junos devices.
* better fix for arch version detection
fixes #15696
* be extra safe about tracebacks in facts.py
* add comments to explain the setup
* make allowempty more conservative, ignore file content
* wrap function call in try/except
* should never happen, but if it happens the bug should be distribtion=N/A and not a traceback
* add tests for centos6, rhel6 and rhel7
* gen_distribution_version_testcase with python2.6
* remove unused imports
* fix redhat/vmware/... parsing
* add centos7 test case
* Make ziploader's ansible and ansible.module_utils libraries into
namespace packages.
* Move __version__ and __author__ from ansible/__init__ to
ansible/release.py. This is because namespace packages only load one
__init__.py. If that is not the __init__.py with the author and
version info then those won't be available.
* In ziplaoder, move the version ito ANSIBLE_CONSTANTS.
* Change PluginLoader to properly construct the path to the plugins even
when namespace packages are present.
* split code as separate class
* split different distributions as individual functions
* keep program logic mostly identical (for now)
* increase readability, reduce complexity/indentation
* make future testing/refactoring easier
* step towards making distribution parsing independent of the Facts class
* add some changes to make facts.py python3 parsable
* Add shared functionality to return list of security group IDs from list of security group names - this functionality can be used by nearly all ec2 modules
* Improved doc string for get_ec2_security_group_ids_from_names function
* Clarify exception handling in EOS
Also modify to EOS to standardize modules. It makes vimdiff a lot less angry
* Move IOS exception handling into Cli
* Move IOS-XR exception handling into Cli
* Move JUNOS exception handling into Cli
* Move NXOS exception handling into Cli
And reorganize to make it match the other modules
* Move OpenSwitch exception handling into Cli
More speculative restructuring here
* HTTPError can also function as a non-exceptional file-like return value (the same thing that urlopen() returns)
* HTTPError - adding response to info dictionnary
* HTTPError - adding response to info dictionnary
* HTTPError - adding body response to info dictionnary
* use list of possible directories directly instead of checking distribution info
* this could fail if someone has keys in one of the other directories, but there could also be custom ssh key directories, which
are not checked at all
* this is work towards separating Facts from Distribution in facts.py
This adds a check to validate the arugment for config_format kwarg in
get_config. If the specified format is not a valid option, the shared
module will call fail_json
Netconf support is provided using the junos-eznc library and the shared
module depends on junos-eznc to be installed on the local Ansible host. This
commit also adds changes to the netcfg library to handle receiving messages
over netconf.
To use netconf, specify transport=netconf for junos module. Be sure that
netconf has been enabled on the remote device.
Instead of using the old OpenSwitch runconfig, we'll use
Mir's new ops.dc declarative config for the DC interaction
with OpenSwitch. This gives us the clearer separation between
ansible and the OpenSwitch, as well as the performance
improvement done inside the ops.dc module itself.
Squashed the original Mir's change into single commit.
Tested-by: Kei Nohguchi <kei@nohguchi.com>
Updated python module wrapper explode method to drop 'args' file next to module.
Both execute() and excommunicate() debug methods now pass the module args via file to enable debuggers that are picky about stdin.
Updated unit tests to use a context manager for masking/restoring default streams and argv.
- search entity by path
- search vm based on folder
- search for a vm based on given id ( uuid/name/dns_name/ip/inventory_path)
- search for a cluster by name, in a given datacenter (optionally)
- search for objects of a given type in a folder
Note: instance uuid is unique to a VM
This reverts commit 1ffadbcc80.
Some modules seem to have path listed for things that are "commands" --
something that may be a path to a command or a bare command that should
be looked up in PATH. With this change, if they were formerly looked up
inPATH they are now being made into an absolute path in the cwd.
Reverting this until we can think more about whether to do this and
change those modules to not use path for those parameters.
* Ziploader proof of concept (jimi-c)
* Cleanups to proof of concept ziploader branch:
* python3 compatible base64 encoding
* zipfile compression (still need to enable toggling this off for
systems without zlib support in python)
* Allow non-wildcard imports (still need to make this recusrsive so that
we can have module_utils code that imports other module_utils code.)
* Better tracebacks: module filename is kept and module_utils directory
is kept so that tracebacks show the real filenames that the errors
appear in.
* Make sure we import modules that are used into the module_utils files that they are used in.
* Set ansible version in a more pythonic way for ziploader than we were doing in module replacer
* Make it possible to set the module compression as an inventory var
This may be necessary on systems where python has been compiled without
zlib compression.
* Refactoring of module_common code:
* module replacer only replaces values that make sense for that type of
file (example: don't attempt to replace python imports if we're in
a powershell module).
* Implement configurable shebang support for ziploader wrapper
* Implement client-side constants (for SELINUX_SPECIAL_FS and SYSLOG)
via environment variable.
* Remove strip_comments param as we're never going to use it (ruins line
numbering)
* Don't repeat ourselves about detecting REPLACER
* Add an easy way to debug
* Port test-module to the ziploader-aware modify_module()
* strip comments and blank lines from the wrapper so we send less over the wire.
* Comments cleanup
* Remember to output write the module line itself in powershell modules
* for line in lines strips the newlines so we have to add them back in
this enhancement will cause the module to connect to the remote ios device
the first time a command wants to run instead of building a connection
immediately
this fixes a bug in nxos shared module to not immediately send a \n when
the connection is made. this commit also localizes the prompt handling
to the nxos module
The network config and template modules share a set of common functions that
have been pulled into the netcfg shared module. This is backwards compatible
with the current implemention in the modules.
Prompt search logic is now localized to the ios shared module instead
of using the common regexps in the shell module. This resolves a number
of problems with ios modules functioning properly
Modules shouldn't need to import boto.ec2.
The check was to test if profile_name was supported by boto.
Two years after the introduction of the support, we will now
assume that if people are passing `profile`, they are using
a version of boto that supports it (this requirement is
already documented in the aws documentation fragment)
Also remove even older version check for `validate_certs`
Fixes#1901
On none-Linux systems `get_distribution()` returns `None`, which fails in `fetch_url`, because the return value of `get_distribution()` is not checked before calling `lower()` on the result.
This commit address a number of minor updates the nxos shared module
* connect() is now lazy loaded
* parse inner output messages when errored
* code syntax cleanup
* Make documentation examples into code blocks
* Make code to call the subsets more general.
* Made min subset always execute (cannot disable it).
* Use a passed in modules parameter rather than global modules. This is needed for ziploader
* Remove unneeded __init__()
* Remove uneeded multiple inheritance from a base class
* gather_facts is now a list type
This commit adds a new feature to allow implementations of shell to
specify the command prompt regexp to be used. It allows adds a new
kwarg at instantiation to kick the remote device with a carriage return.
By default the kickstart flag is true but can be disabled by passing
kickstart=False.
This commit address to issues in the eos shard module. The first one
is a bug fix for returning the running config when the transport is eapi.
The shared module will now return config text instead of an object. The
second is a optimization that delays when the eos module connects to the
remote devices. This provies a performance enhancement when using
ssh since the module doesn't default to connecting immediately
Just including the `ssl` key in the config for MySQLdb.connect, causes it to check for the existence of SSL support. This patch only adds the key if one of the ssl configuration options is included.
On some switches, starting an SSH connection and immediately calling
recv() will result in a connection timeout. The switch requires some
input on the channel before it provides any prompt.
As such, this patch sends an empty command immediately upon connection,
triggering the switch to send a prompt which the shell can then
interpret.
Signed-off-by: Devananda van der Veen <devananda.vdv@gmail.com>
* fetch_url shouldn't both accept follow_redirects and support follow_redircts via module.params
* Default follow_redirects for open_url should be 'urllib2'
* Add redirect test for get_url
This commit fixes two bugs in the openswitch shared module. The first
bug was a wrong argument type for the use_ssl argument. It was set
to int and should be bool. The second changes the default ports for http
(was 80, now 8091) and https (was 443, now 18091). This change aligns
the default port values with the OS
The find_mount_point function does not resolve the mount point of paths with a soft-link correctly and returns the wrong mount-point.
I have mounted an NFS filesystem on /nfs-mount. This directory contains a directory called "directory". I also created a soft-link to this last directory: /soft-link-to-directory -> /nfs-mount/directory. I created the following task to copy a file into /soft-link-to-directory:
- name: copy file to nfs-mount
copy:
src: "file"
dest: "/soft-link-to-directory/file"
This throws an exception:
invalid selinux context: [Errno 95] Operation not supported
This is caused by the find_mount_point function to return '/' as the mount point for '/soft-link-to-directory/file'. This should have been /nfs-mount. Because the find_mount_point returns the wrong mount-point, the is_special_selinux_path function does not recognise the file is on an NFS mount and tries to set the default SELinux context (system_u:object_r:default_t:s0), which fails. The context should have been: system_u:object_r:nfs_t:s0
Full Ansible output:
TASK [copy file to nfs-mount] **************************************************
fatal: [hostname]: FAILED! => {"changed": false, "checksum": "f34b60930a5d6d689cf49a4c16bd7f9806be608c", "cur_context": ["system_u", "object_r", "nfs_t", "s0"], "failed": true, "gid": 24170, "group": "foundation", "input_was": ["system_u", "object_r", "default_t", "s0"], "mode": "0644", "msg": "invalid selinux context: [Errno 95] Operation not supported", "new_context": ["system_u", "object_r", "default_t", "s0"], "owner": "root", "path": "/soft-link-to-directory/.ansible_tmpWCT6Z4file", "secontext": "system_u:object_r:nfs_t:s0", "size": 37, "state": "file", "uid": 0}
The setup module calls /bin/lsblk once for each device appearing in the /etc/mtab file. However, the same device appears there mutliple times when the system uses bind-mounts. As a result, /bin/lsblk is being called repeatedly to get the uuid of the same device.
On a system with many mounts, this leads to a TimeoutError in the get_mount_facts function of the setup module as described in #14551.
Fixes#14551
ansible_os_family on openSUSE Leap has the wrong value:
"ansible_os_family": "openSUSE Leap",
It should be:
"ansible_os_family": "Suse",
This change fixes that by adding the relevant key and ensuring that dict
lookups replace ' ' with '_' so the key does not contain a space.
This commit fixes a situation where connection errors would be caught
but no useful information display. The connection error is now caught
and emitted in a call to fail_json
This commit fixes a situation where connection errors would be caught
but no useful information display. The connection error is now caught
and emitted in a call to fail_json
This commit fixes a situation where connection errors would be caught
but no useful information display. The connection error is now caught
and emitted in a call to fail_json
This commit fixes a situation where connection errors would be caught
but no useful information display. The connection error is now caught
and emitted in a call to fail_json
This commit fixes a situation where connection errors would be caught
but no useful information display. The connection error is now caught
and emitted in a call to fail_json
When working around "bad systems that insist on not allowing
updates in an atomic manner", we should not run previous exception
management code that tries to perform atomic move in case of
exception since the dirty non atomic move has already been
performed.
just 'cause people build bad systems that insist on not allowing
updates in an atomic manner and force us to do them in a very
unsafe way that has race conditions and can lead to many issues.
if using this option you should really be opening a bug report with
the system that only allows for this type of update.
and now i shower though i doubt i'll feel clean
This fixes a minor bug in the nxos config module to ensure that both the
cli and nxapi transport return the running config as a string and not
a list object.
This addresses two issues with the nxos shared module. The first issue is
argument precedence checking. The module should prefer explicit arguments
over arguments passed vi the provider. This is now fixed to honor that
precedence. The second issue is collecting output from nxapi and returning
the response. Prior to this change the entire json structure was returned.
Now just the output is returned to align it better with cli based output
The eos shared module should prefer to use explicit task arguments over
arguments provided through the provider. This fixes a problem where
that was not the case
* In 2.0.0.x become was reversed for synchronize. It was happening on
the local machine instead of the remote machine. This restores the
ansible-1.9.x behaviour of doing become on the remote machine.
However, there's aspects of this that are hacky (no hackier than
ansible-1.9 but not using 2.0 features). The big problem is that it
does not understand any become method except sudo. I'm willing to use
a partial fix now because we don't want people to get used to the
reversed semantics in their playbooks.
* synchronize copying to the wrong host when inventory_hostname is
localhost
* Fix problem with unicode arguments (first seen as a bug on synchronize)
Fixes#14041Fixes#13825
The provider argument accepts the set of device common arguments as a
dict object. Individual connection arguments can still be included and
take priority over the provider argument. This update includes additions
to the nxos doc fragment
New argument `provider` added to the ios shared module that provides
the ability to pass all of the common ios arguments as a dict. This commit
includes some minor bugfixes and refactoring of names. It also includes
udpates to the ios documentation fragment for the new argument
Adds a new argument `provider` to the eos shared module and updates the
eos doc fragment. This commit includes some additional minor fixes and
code refactors for naming conventions. The `provider` argument allows the
shared module arguments to be passed as a dict object instead of having
to pass each argument invididually.
This commit adds a new argument `provider` to the iosxr shared module that
allows common connection parameters to be passed as a dict object. The
constraints on the args still applies. This commit also updates the iosxr
doc fragment.
Adds new argument `provider` to the openswitch shared module. The provider
argument can pass all openswitch connection arguments as a dict object. This
update includes adding the provider argument to the openswitch doc fragment
This commit adds a new argument `provider` to the junos shared module. The
argument allows the set of common connection args to be passed to the
junos shared module. This commit also updates the junos doc fragment
This commit provides an argument to provide a path to the private key
file. This will allow paramiko to use the key file as opposed to only
username / password combinations for CLI connections.
The nxapi module has been superseded by the nxos shared module and is not longer needed. This commit removes (deletes) nxapi from module_utils. All custom modules that have used nxapi should be using nxos instead.
This commit adds a new shared module that parses network device configuration
files. It is used to build modules that work with the various supported
network device operating systems
This commit adds a new shared module for working with network devices running
the Juniper Junos operating system. The commit includes a new document
fragment junos to be used when building modules. The junos shared module
currently only supports CLI
This commit adds a new shared module openswitch for building modules that
work with OpenSwitch. This shared module supports connectivity to
OpenSwitch devices over SSH, CLI or REST. It also adds an openswitch
documentation fragment for use in modules
This commit refactors the nxapi into a new shared module nxos that supports
connectivity over both ssh (cli) and nxapi. It supercedes the nxapi shared
module and removes it from module_utils. This commit also adds a
documentation fragement supporting the nxos shared module
This commit adds a new shared module for working with Cisco IOS XR devices over
CLI (SSH). It also provides a documentation fragement for the commmon arguments
provided by the iosxr module.
This update refactor the ios shared module to use the new shell shared
library instead of issh and cli. It also adds the ios documentation
fragment to be used when building ios based modules.
This adds a shared module for communicating with Arista EOS devices over
SSH (cli) or JSON-RPC (eapi). This modules replaces the eapi.py module
previously added to module_utils. This commit includes a documentation
fragment that describes the eos common arguments
This commit add a new shared module shell that is used to build connections
to network devices that operate in a CLI environment. This commit supercedes
the issh.py and cli.py commits and removes them from module_utils.
* Fix to error if validate_cert is True and python doesn't support it.
* Only globally disable certificate checking if really needed. Use
bigip verify parameter if available instead.
* Remove public disable certificate function to make it less likely
people will attempt to reuse that
* now module errors clearly state msg=MODULE FAILURE
* module's stdout and stderr go into module_stdout and module_stderr keys
which only appear during parsing failure
* invocation module_args are deleted from results provided by action
plugin as errors can keep us from overwriting and then disclosing info that
was meant to be kept hidden due to no_log
* fixed invocation module_args set by basic.py as it was creating different
keys as the invocation in action plugin base.
* results now merge
The current ssh shared module forces only password based authentication. This
change will allow the ssh module to use keys if a password is not provided.
OS X El Capitan moved the /etc/ssh_* files into /etc/ssh/. This fix
adds a distribution version check for Darwin to set the keydir
appropriately on El Capitan and later.
This patch fixes a bug in module_utils/ios.py where the the wrong shared
module arguments are being generated. This bug prevented the shared module
from operating correctly. This patch should be generally applied.
This patch fixes an issue with the common args dict in the eapi shared
module. This patch is required for the eapi shared module to be properly
imported and is therefore should be applied to all instances.
This commit changes the way modules create an instance of AnsibleModule to
now use a common function, eapi_module. This function will now automatically
append the common argument spec to the module argument_spec. Module
arguments can override common module arguments
The secret_key parameter especially can contain non-ascii characters and
will throw an error if such a string is passed as a byte str.
Potential fix for #13303
It is natural that an argument_spec with choises=BOOLEAN accepts
boolean literal (True, False) though the current implementation
allows only string or int.
* StandardError doesn't exist in python3
* because it is the root of builtin expections, we can't catch it
separate from the builtin exceptions
* It doesn't tell us anything about the error being thrown as it's too
generic
This ssh shared module is used for building modules that require an
interactive shell environment such as those required for connecting
to network devices
Error reporting was broken for GCE modules- pprint didn't work with exceptions, so you'd always get "Unexpected response: {}" instead of the real error.
This commit adds the shared module support for Cisco NXAPI. The shared
module builds on top of the urls shared module. The urls module provides
the http/s transport. This module only supports the JSON request message
format.
These were mostly saving exceptions but not using them. Getting rid of
those will help with eventually running modules via either python2.4 or
python3.x.
(Reminder: cannot use six here, module_utils get shipped to remote
machines that may not have six installed -- besides six doens't support
Python 2.4.)
* allow global no_log setting, no need to set at play or task level, but can be overriden by them
* allow turning off syslog only on task execution from target host (manage_syslog), overlaps with no_log functionality
* created log function for task modules to use, now we can remove all syslog references, will use systemd journal if present
* added debug flag to modules, so they can make it call new log function conditionally
* added debug logging in module's run_command
Make the code compatible with Pythons 2.4 through 3.5 by using
sys.exc_info()[1] instead.
This is necessary but not sufficient for Python 3 compatibility.
* Add exception handling when running PowerShell modules to provide exception message and stack trace.
* Enable strict mode for all PowerShell modules and internal commands.
* Update common PowerShell code to fix strict mode errors.
* Fix an issue with Set-Attr where it would not replace an existing property if already set.
* Add tests for exception handling using modified win_ping modules.
The contributor's name on line 10 (originally line 7) includes a character
that the default Python encoding (ASCII) raises an error on when interpreting
the file.
Specifying the utf-8 encoding, as is done in other modules, resolves
the error.
The error being raised is
SyntaxError: Non-ASCII character '\xc3' in file /.../lib/ansible/module_utils/f5.py
on line 7, but no encoding declared; see http://www.python.org/peps/pep-0263.html
for details
Rewrite function `get_fqdn`. It returns fqdn for all kinds of urls now.
`add_git_host_key` determines whether a url is ssh and whether its host
key should be added.
* Add exception handling when running PowerShell modules to provide exception message and stack trace.
* Enable strict mode for all PowerShell modules and internal commands.
* Update common PowerShell code to fix strict mode errors.
* Fix an issue with Set-Attr where it would not replace an existing property if already set.
* Add tests for exception handling using modified win_ping modules.
* A commen dict of keys has been defined, which we look in results returned from the API.
* self.returns dict can be use in subclass to extend this dict.
* Optionally the key name can be replaced with a new key name, often used to make the return keys identical to the arguments passed.
* Use new style class
- Add support for inserting module args into PowerShell modules. Fixes#11661.
- Support Windows paths containing spaces. Applies changes from #10727 to v2. Fixes#9999. Should also fixansible/ansible-modules-core#944 and ansible/ansible-modules-core#1007.
- Change how execution policy is set for running remote scripts. Applies changes from #11092 to v2. Also fixesansible/ansible-modules-core#1776.
- Use codepage 65001 (UTF-8) for WinRM connection instead of default (CP437), convert command to UTF-8 and results from UTF-8. Replaces changes from #10024. Fixes#11198.
- Close WinRM connection when task completes.
- Use win_stat, win_file and win_copy modules instead of stat, file and copy when called from within other action plugins (only when using WinRM+PowerShell).
- Unquote Windows path arguments before passing to win_stat, win_file, win_copy and slurp modules (only when using WinRM/PowerShell).
- Check for win_ping module to determine if core modules are missing (only when using WinRM/PowerShell).
- Add stdout_lines to result from running low level commands (so stdout_lines is available when using raw/script).
- Update copy action plugin to use shell functions for joining paths and checking for trailing slash.
- Update fetch action plugin to unquote source path when using Windows paths.
- Add win_copy and win_template action plugins that inherit from copy and template.
- Support running .bat and .cmd scripts using default system encoding instead of UTF-8.
- Always send PowerShell commands as base64-encoded blobs to allow for running simple PowerShell commands via raw.
- Support running modules on Windows with interpreters other than PowerShell.
- Update integration tests to support above changes and test unicode fixes.
- Add test for win_user error from ansible/ansible-modules-core#1241 (fixed by ansible/ansible-modules-core#1774).
- Add test for additional win_stat output values (implemented by ansible/ansible-modules-core#1473).
- Add test for OS architecture and name from setup.ps1 (implemented by ansible/ansible-modules-core#1100).
All WinRM integration tests pass for me with these changes.
This allows usage of tls-1.1 and tls-1.2 if the underlying openssl
library supports it. Unfortunately it also allows sslv2 and sslv3 if
the server is only configured to support those. In this day and age,
that's probably something that the server administrator should fix
anyhow.
