* Add module mlnxos_linkagg for configuring LAG and MLAG on Mellanox
switches
Signed-off-by: Samer Deeb <samerd@mellanox.com>
* Remove unnecessary method in unit-test
remove _execute_module and use execute_module from base class
* update version parsing and move requirements to nso_* modules
prepare for introduction of nso_show module that has other version
requirements than the existing nso_* modules.
* Add nso_show module for retreiving config from Cisco NSO
New module that supports getting configuration and operational data
from Cisco NSO.
Shell is implemented via the command module. There was a special case
in mod_args to do that. Make shell into an action plugin to handle that
instead.
Also move the special case for the command nanny into a command module
action plugin. This is more appropriate as we then do not have to send
a parameter that is only for the command module to every single module.
* WIP adds network subnetting functions
* adds functions to convert between netmask and masklen
* adds functions to verify netmask and masklen
* adds function to dtermine network and subnet from address / mask pair
* network_common: add a function to get the first 48 bits in a IPv6 address.
ec2_group: only use network bits of a CIDR.
* Add tests for CIDRs with host bits set.
* ec2_group: add warning if CIDR isn't the networking address.
* Fix pep8.
* Improve wording.
* fix import for network utils
* Update tests to use pytest instead of unittest
* add test for to_ipv6_network()
* Fix PEP8
This fix check if DNS4 is None or not before proceeding with
other operations. Also, added unit test for this change.
Signed-off-by: Fedor Sumkin <qosys.net@gmail.com>
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
Split the one monolithic test for basic.py into several files
* Split test_basic.py along categories.
This is preliminary to get a handle on things. Eventually we may want
to further split it so each file is only testing a single function.
* Cleanup unused imports from splitting test_basic.py
* Port atomic_move test to pytest.
Working on getting rid of need to maintain procenv
* Split a test of symbolic_mode_to_octal to follow unittest best practices
Each test should only invoke the function under test once
* Port test_argument_spec to pytest.
* Fix suboptions failure
* Fixing aruba's inconsitent indenting.
* Adding config with different children indentation and unit test to confirm the different spacing does not matter.
* Fixing pylint check. Missed an r prefix.
* When inserting a new rule in `insert_after_rule`, check if the old rule is
the last rule, to avoid a list index out of range error when attempting to
access the next rule.
* Add a test for inserting a new rule after the last rule.
Allow CamelCase version of snake_dict_to_camel_dict
(currently only dromedaryCase is supported)
Add reversible option to camel_dict_to_snake_dict
Add tests for both of these options
* TestPlaybookCLI: '--flush-cache' were ignored
Check that using '--flush-cache' does something
* check that '_flush_cache' does something
There isn't any fact by default: the assertion was true even if
'cli._flush_cache()' isn't called.
* Fixing save so it still works. Adding changed as an option for save_when.
* Updating unit tests.
* Updating description to state that changed was added in 2.5.
* Change cast_list_to_dict to more generic rekey_on_member
cast_list_to_dict was taking an arbitrary data format in and returning
an arbitrary data format out. Rework this to be a more generic function
which creates a dict of dicts based on a member of the dict.
Remove cast_dict_to_list since rekey_on_member handles the use cases we
know about and cast_dict_to_list suffers from the same problems as
cast_list_to_dict. If this is still needed we could think about filters
we could add to do this in a short jinja2 pipeline.
* Fix bare excepts (bare excepts even catch sys.exit())
* Fix _clean_result for debug callback with 1 char var names
The check in _clean_results was removing any keys that happened
to be one of the chars in ('invocation') instead of the string
'invocation'. This was meant to be a tuple but there was no comma
so the for iterated the string instead of the tuple.
Introduced in 9dba580204fcc7d95d4ca2ea2ae4ce23fe28c2ed
Update unit test to catch this.
Fixes#33723
* Use .pop() to remove invocation from results dict
In base callback _clean_results, simplify the way the
'invocation' item is removed.
Add some more unit tests.
* Deprecate Entity, EntityCollection and use subspec in network modules
* As per proposal https://github.com/ansible/proposals/issues/76
deprecate use of Entity, EntityCollection, ComplexDict, ComplexList
and use subspec instead.
* Refactor ios modules
* Refactor eos modules
* Refactor vyos modules
* Refactor nxos modules
* Refactor iosxr modules
* Add support for key in suboptions handling
* Fix CI issues
* - Netconf plugin addition for iosxr
- Utilities refactoring to support netconf and cliconf
- iosx_banner refactoring for netconf and cliconf
- Integration testcases changes to accomodate above changes
* Fix sanity failures, shippable errors and review comments
* fix pep8 issue
* changes run_command method to send specific command args
* - Review comment fixes
- iosxr_command changes to remove ComplexDict based command_spec
* - Move namespaces removal method from utils to netconf plugin
* Minor refactoring in utils and change in deprecation message
* rewrite build_xml logic and import changes for new utils dir structure
* - Review comment changes and minor changes to documentation
* * refactor common code and docs updates
In case of workflow delete action, the returned 404 status code
considered as invalid although it's a valid code for not found (deleted)
entity.
Removed verification of the status. Only success should be verified.
Fixes#33524
* Porting tests to pytest
* Achievement Get: No longer need mock/generator.py
* Now done via pytest's parametrization
* Port safe_eval to pytest
* Port text tests to pytest
* Port test_set_mode_if_different to pytest
* Change conftest AnsibleModule fixtures to be more flexible
* Move the AnsibleModules fixtures to module_utils/conftest.py for sharing
* Testing the argspec code requires:
* injecting both the argspec and the arguments.
* Patching the arguments into sys.stdin at a different level
* More porting to obsolete mock/procenv.py
* Port run_command to pytest
* Port known_hosts tests to pytest
* Port safe_eval to pytest
* Port test_distribution_version.py to pytest
* Port test_log to pytest
* Port test__log_invocation to pytest
* Remove unneeded import of procenv in test_postgresql
* Port test_pip to pytest style
* As part of this, create a pytest ansiblemodule fixture in
modules/conftest.py. This is slightly different than the
approach taken in module_utils because here we need to override the
AnsibleModule that the modules will inherit from instead of one that
we're instantiating ourselves.
* Fixup usage of parametrization in test_deprecate_warn
* Check that the pip module failed in our test
* Refactor common network shared and platform specific code into package (part-1)
As per proposal #76 refactor common network shared and platform specific
code into sub-package.
https://github.com/ansible/proposals/issues/76
* ansible.module_utils.network.common - command shared functions
* ansible.module_utils.network.{{ platform }} - where platform is platform specific shared functions
* Fix review comments
* Fix review comments
* Refactors bigip_node
Includes a number of fixes and enhancements in addition to refactoring
the code to be inline with f5 standards
* Fixes upstream errors
* Adds bigip_policy_rule module
This module is the second component of managing LTM policies on
BIG-IP. This module lets you manage the rules of a policy
* Fixing upstream errors
* Correcting YAML errors
* Fixes and features for bigip_provision
Adds support for dedicated modules. Fixes bug in minimum name.
Adds wrappers around checking for up-ness so that they will contribute
to the watch loop
* Fixes upstream errors
* Added . and / to rule args regexp
Things like pam_echo.so file=/etc/foo.txt weren't being matched and
causing incorrect change counts. Adding / and . fixed that.
Fixes#33351
* pamd: test argument with value
Relates #33351
* Adding module enos_config and its UT files
* Removing trailing line
* Removing trailing lines
* Editing enos_module.py to fix build errors
* Removing blank lines in end
* Updating enos_config.py based on review comments
* Adding one more blank line
* Removing training white space
* Removing test_enos_config_force method from UT
* Updating documentation
* Comments by John, Remove version_added: "2.5"
* Add netscaler_nitro_request module
* Make changes as requested.
* Fix whitepsace in EXAMPLES block.
* Set module changed status according to operation performed.
* Added support to Datacenter resources in HPE OneView
* Adjusting comments in oneview_datacenter_facts
* Adding no_log on the documentation
* Using Pytest to Oneview DatacenterFactsModule tests
* Warn on tests used as filters
* Update docs, add aliases for tests that fit more gramatically with test syntax
* Fix rst formatting
* Add successful filter, alias of success
* Remove renamed_deprecation, it was overkill
* Make directory alias for is_dir
* Update tests to use proper jinja test syntax
* Update additional documentation, living outside of YAML files, to reflect proper jinja test syntax
* Add conversion script, porting guide updates, and changelog updates
* Update newly added uses of tests as filters
* No underscore variable
* Convert recent tests as filter changes to win_stat
* Fix some changes related to rebasing a few integration tests
* Make tests_as_filters_warning explicitly accept the name of the test, instead of inferring the name
* Add test for tests_as_filters_warning
* Update tests as filters in newly added/modified tests
* Address recent changes to several integration tests
* Address recent changes in cs_vpc
* add type manipulation
* update for py3
* add tests for list to dict
* Add dict to list tests
* Update tests to search for regex in response
* pep8 clean up
* update Exception for py3
* update test to be py2/3 compat
* update for py26 compat
* potential fix for py3 and py26
* potential fix for py3 and py26 take2
* add new line to kick off shippable
* remove cache file created
* fix filter name
* add space for shipable
* Fix junos integration test fixes as per connection refactor (#33050)
Refactor netconf connection plugin to work with netconf plugin
* Fix junos integration test fixes as per connection refactor (#33050)
Refactor netconf connection plugin to work with netconf plugin
Fix CI failure
Fix unit test failure
Fix review comments
* Adding aliases for field attributes and renaming async attribute
As of Python 3.7, the use of async raises an error, whereas before the use
of the reserved word was ignored. This adds an alias field for field attrs
so that both async and async_val (interally) work. This allows us to be
backwards-compatible with 3rd party plugins that may still reference Task.async,
but for the core engine to work on Py3.7+.
* Remove files fixed for 'async' usage from the python 3.7 skip list
* Allow the user to circumvent adding -tt on ssh commands to help aid in
debugging ssh related problems.
* Move config to the plugin
* Set version_added
* Change yaml section to "connection"
* Fix ssh unit tests
* jsonify inventory
* smarter import, dont pass kwargs where not needed
* added datetime
* Eventual plan for json utilities to migrate to common/json_utils when we split
basic.py no need to move jsonify to another file now as we'll do that later.
* json_dict_bytes_to_unicode and json_dict_unicode_to_bytes will also
change names and move to common/text.py at that time (not to json).
Their purpose is to recursively change the elements of a container
(dict, list, set, tuple) into text or bytes, not to json encode or
decode (they could be a generic precursor to that but are not limited
to that.)
* Reimplement the private _SetEncoder which changes sets and datetimes
into objects that are json serializable into a private function
instead. Functions are more flexible, less overhead, and simpler than
an object.
* Remove code that handled simplejson-1.5.x and earlier. Raise an error
if that's the case instead.
* We require python-2.6 or better which has the json module builtin to
the stdlib. So this is only an issue if the stdlib json has been
overridden by a third party module and the simplejson on the system
is 1.5.x or less. (1.5 was released on 2007-01-18)
* Add new filter to parse xml output for network use cases
Fixes#31026
* Add parse_xml filter
* Add documentation for parse_xml filter
* Edited for clarity.
* Fix review comment and add unit tests
* Fix unit test CI failure
* Fix CI issues
* Fix unit test failures
* Fix review comments
* More copy edits.
* Adding RPC attribute arguments to `junos_rpc` network module.
* Specifying module argument version.
* Fixing DOCUMENTATION block.
* First attempt at new test fixture.
* Updated RPC_CLI_MAP.
* Use `result` instead of `reply`.
This module can be used to manage guests on a vCMP provisioned BIG-IP.
vCMP is a hardware-only feature, therefore this module cannot be used
on the VE editions of BIG-IP.
* move set_module_args to units.modules.utils
* unit tests: reuse set_module_args
* unit tests: mock exit/fail_json in module.utils.ModuleTestCase
* unit tests: use module.utils.ModuleTestCase
* unit tests: fix 'import shadowed by loop variable'
* included inventory and callback in new config
allow inventory to be configurable
updated connection options settings
also updated winrm to work with new configs
removed now obsolete set_host_overrides
added notes for future bcoca, current one is just punting, it's future's problem
updated docs per feedback
added remove group/host methods to inv data
moved fact cache from data to constructed
cleaner/better options
fix when vars are added
extended ignore list to config dicts
updated paramiko connection docs
removed options from base that paramiko already handles
left the look option as it is used by other plugin types
resolve delegation
updated cache doc options
fixed test_script
better fragment merge for options
fixed proxy command
restore ini for proxy
normalized options
moved pipelining to class
updates for host_key_checking
restructured mixins
* fix typo
* Fix vault --ask-vault-pass with no tty
2.4.0 added a check for isatty() that would skip setting up interactive
vault password prompts if not running on a tty.
But... getpass.getpass() will fallback to reading from stdin if
it gets that far without a tty. Since 2.4.0 skipped the interactive
prompts / getpass.getpass() in that case, it would never get a chance
to fall back to stdin.
So if 'echo $VAULT_PASSWORD| ansible-playbook --ask-vault-pass site.yml'
was ran without a tty (ie, from a jenkins job or via the vagrant
ansible provisioner) the 2.4 behavior was different than 2.3. 2.4
would never read the password from stdin, resulting in a vault password
error like:
ERROR! Attempting to decrypt but no vault secrets found
Fix is just to always call the interactive password prompts based
on getpass.getpass() on --ask-vault-pass or --vault-id @prompt and
let getpass sort it out.
* up test_prompt_no_tty to expect prompt with no tty
We do call the PromptSecret class if there is no tty, but
we are back to expecting it to read from stdin in that case.
* Fix logic for when to auto-prompt vault pass
If --ask-vault-pass is used, then pretty much always
prompt.
If it is not used, then prompt if there are no other
vault ids provided and 'auto_prompt==True'.
Fixes vagrant bug https://github.com/hashicorp/vagrant/issues/9033Fixes#30993
* Adding git_command module and its UT file
* Changing Author Name and removing 2 blank lines
* Removing blank lines
* Adding enos_config and its UT files
* Removing config module as I am allowed to have only module per PR
* Work on Ganesh's Review comments
* John Review Comments on enos_command.py
* Review comments of John
* Add mtu option nxos_interface feature idea
Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>
* Add unit test for mtu feature
Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>
* Better handling of malformed vault data envelope
If an embedded vaulted variable ('!vault' in yaml)
had an invalid format, it would eventually cause
an error for seemingly unrelated reasons.
"Invalid" meaning not valid hexlify (extra chars,
non-hex chars, etc).
For ex, if a host_vars file had invalid vault format
variables, on py2, it would cause an error like:
'ansible.vars.hostvars.HostVars object' has no
attribute u'broken.example.com'
Depending on where the invalid vault is, it could
also cause "VARIABLE IS NOT DEFINED!". The behavior
can also change if ansible-playbook is py2 or py3.
Root cause is errors from binascii.unhexlify() not
being handled consistently.
Fix is to add a AnsibleVaultFormatError exception and
raise it on any unhexlify() errors and to handle it
properly elsewhere.
Add a _unhexlify() that try/excepts around a binascii.unhexlify()
and raises an AnsibleVaultFormatError on invalid vault data.
This is so the same exception type is always raised for this
case. Previous it was different between py2 and py3.
binascii.unhexlify() raises a binascii.Error if the hexlified
blobs in a vault data blob are invalid.
On py2, binascii.Error is a subclass of Exception.
On py3, binascii.Error is a subclass of TypeError
When decrypting content of vault encrypted variables,
if a binascii.Error is raised it propagates up to
playbook.base.Base.post_validate(). post_validate()
handles exceptions for TypeErrors but not for
base Exception subclasses (like py2 binascii.Error).
* Add a display.warning on vault format errors
* Unit tests for _unhexlify, parse_vaulttext*
* Add intg test cases for invalid vault formats
Fixes#28038
* implements jsonrpc message passing for ansible-connection
* implements more generic mechanism for persistent connections
* starts persistent connection in task_executor if enabled and supported
* supports using network_cli as top level connection plugin
* enhances logging for persistent connection to stdout
* Update action plugins
* Fix Python3 RPC
* Fix Junos bytes<-->str issues
* supports using netconf as top level connection plugin
* Error message when running netconf on an unsupported platform
* Update tests
* Fix `authorize: yes` for `connection: local`
* Handle potentially JSON data in terminal
* Add clarifying detail if possible on ConnectionError
* Squashing all commits to one as suggested by John
* Adding Unit test method for the module enos_facts.py
* Pep8 and Ylint issues addressed
* Trying again to remove blank line. Some scripts are required for this.
* Bug Fixing for interfaces
* Editing for over indenting issue
* E203 whitespace before ','
* Update enos.py
Added warnings argument as to check_args method
* Update enos_facts.py
Added warnings to check_args method
* When getting the stack events we need to consider the case where we don't have ClientRequestToken fixes#32396
* Adding tests for the case when the ClientRequestToken is not present in the stack creation.
* Renaming the stack that the test for Client Request Token requires so it won't cause collisions with the basic test.
* Ensure include_role unit tests check something
This is not the case: get_tasks_vars doesn't yield
* Fix include_role unit tests
Since e609618274, include_role are not
static anymore.
* Add some tests for iptables
* Fix remove bug (calls 2 times check to remove a chain)
* Add me as maintainer
* Fix PEP8
* Doc: Give more information on issue #18988
* Fix#18988 and test it
* Fix doc (thanks Pillou)
* enable PEP8 check for iptables
This patch addresses a number of issues, large and small, that were
identified by users in the downstream repo.
* formatting of some code
* specific option combinations leading to errors
* missing includes for unit tests
* ios_logging: Fix typo in documentation
* ios_logging: Fix traceback when setting buffered destination without size
When the size parameter is not configured while configuring the buffered
destination, a traceback occurs due to the fact that validate_size expects the
parameter to be an int. Explicitely converting value to int makes the
check work for every case.
* ios_logging: Update size parameter documentation
Update the documentation of the size paramter to reflect the current behaviour
of setting a default of 4096 for the buffered dest.
* ios_logging: Add unit test
Add unit test for ios_logging testing the behaviour clarified in the previous
commits.
* ios_logging: Fix python 2.6 compliance
This module's purpose is to specifically manage the ssl keys. It
is essentially the key component of the bigip_ssl_certificate module.
The modules were separated and the key portion deprecated from
bigip_ssl_certificate in favor of this module.
* - Adds iosxr_netconf module to configure netcong service on Cisco
IOS-XR devices
* - Adds Integration test for module
- Handles diff return from load_config
* - Adds unit test for iosxr_netconf module
* Start using ClientRequestTokens in event lists
* Include request token in all reqs that support it (basically all but check mode/changeset)
* Update placebo recordings
* Add comments for CRQ popping
Module allows you to wait for a bigip device to be
"ready" for configuration. This module will wait for things like
the device coming online as well as the REST API and MCPD being
ready.
If all of the above is not online and ready, then no configuration
will be able to be made.
* better cleanup on task results display
callbacks get 'clean' copy of result objects
moved cleanup into result object itself
removed now redundant callback cleanup
moved no_log tests
* moved import as per feedback
In this refactor we moved to the most recent coding standards for
both F5 and Ansible. Many bugs were fixed and some features were
also added (such as ipv6 support).
New conventions for ansible warrant fixes to accomodate those
in bigip_partition.
This patch also includes an import fix that can raise an error when
Ansible unit tests run
This adds a new type of vault-password script (a 'client') that takes advantage of and enhances the
multiple vault password support.
If a vault password script basename ends with the name '-client', consider it a vault password script client.
A vault password script 'client' just means that the script will take a '--vault-id' command line arg.
The previous vault password script (as invoked by --vault-password-file pointing to an executable) takes
no args and returns the password on stdout. But it doesnt know anything about --vault-id or multiple vault
passwords.
The new 'protocol' of the vault password script takes a cli arg ('--vault-id') so that it can lookup that specific
vault-id and return it's password.
Since existing vault password scripts don't know the new 'protocol', a way to distinguish password scripts
that do understand the protocol was needed. The convention now is to consider password scripts that are
named like 'something-client.py' (and executable) to be vault password client scripts.
The new client scripts get invoked with the '--vault-id' they were requested for. An example:
ansible-playbook --vault-id my_vault_id@contrib/vault/vault-keyring-client.py some_playbook.yml
That will cause the 'contrib/vault/vault-keyring-client.py' script to be invoked as:
contrib/vault/vault-keyring-client.py --vault-id my_vault_id
The previous vault-keyring.py password script was extended to become vault-keyring-client.py. It uses
the python 'keyring' module to request secrets from various backends. The plain 'vault-keyring.py' script
would determine which key id and keyring name to use based on values that had to be set in ansible.cfg.
So it was also limited to one keyring name.
The new vault-keyring-client.py will request the secret for the vault id provided via the '--vault-id' option.
The script can be used without config and can be used for multiple keyring ids (and keyrings).
On success, a vault password client script will print the password to stdout and exit with a return code of 0.
If the 'client' script can't find a secret for the --vault-id, the script will exit with return code of 2 and print an error to stderr.
* documentation was not inline with other Ansible modules
* Python 3 specific imports were missing
* monitor_type is no longer required when creating a new pool; it is now the default.
* A new monitor_type choice of "single" was added for a more intuitive way to specify "a single monitor". It uses "and_list" underneath, but provides additional checks to ensure that you are specifying only a single monitor.
* host and port arguments have been deprecated for now. Please use bigip_pool_member instead.
* 'partition' field was missing from documentation.
* A note that "python 2.7 or greater is required" has been added for those who were not aware that this applies for ALL F5 modules.
* Unit tests were fixed to support the above module
* Adding a cli transport option for the bigip_command module.
* Fixing keyerror when using other f5 modules. Adding version_added for new option in bigip_command.
* Removing local connection check because the F5 tasks can be delegated to any host that has the libraries for REST.
* Using the network_common load_provider.
* Adding unit test to cover cli transport and updating previous unit test to ensure cli was not called.
* Fix rollback in junos_config
Fixes#30778
* Call `load_configuration` with rollback id in case
the id is given as input
* Pass rollback id to `get_diff()` to fetch diff from device
* Fix unit test
- old functionality is still available direct lookup use, the following are equivalent
with_nested: [[1,2,3], ['a','b','c']]
loop: "{{lookup('nested', [1,2,3], ['a','b','c'])}}"
- avoid squashing with 'loop:'
- fixed test to use new intenal attributes
- removed most of 'lookup docs' as these now reside in the plugins
* Make ansible_selinux facts a consistent type
Rather than returning a bool if the Python library is missing, return a dict with one key containing a message explaining there is no way to tell the status of SELinux on the system becasue the Python library is not present.
* Fix unit test
The /etc/os-release based distro detection doesn't
seem to work for Ubuntu 10.04 (no /etc/os-release?).
So it was testing the next case which was /etc/lsb-release to
see if it is 'Mandriva'. Since the check for existence of
(/etc/lsb-release, Mandrive) was the first non-empty dist
file match, 'ansible_distribution' was being set to 'Mandriva'
expecting to be corrected by the data from the dist file content.
But since the dist file parsing for Mandriva didn't match for
Ubuntu 10.04 /etc/lsb-release _and_ there is no Debian specific
lsb-release check, 'ansible_distribution' stayed at 'Mandriva'
and the dist file checking loop keeps going and eventually off
the end of the list before finding a better match.
Adding a debian/ubuntu specific check for /etc/lsb-release after
the debian os-release sets the info correctly and stops further
checking of dist files.
Fixes#30693
* Added support to retrieving LIG resources in HPE OneView
* Fixing copyright header according to review
* Swapping out config for full credentials in parameter for documentation
* Added support to retrieving Enclosures in HPE OneView
- Added unit tests
* Updated version_added to 2.5
* Changing return type of enclosure_script to string
* Fixing copyright header according to review
* Replaced config for credentials in parameters for documentation
* Fix fact failures cause by ordering of collectors
Some fact collectors need info collected by other facts.
(for ex, service_mgr needs to know 'ansible_system').
This info is passed to the Collector.collect method via
the 'collected_facts' info.
But, the order the fact collectors were running in is
not a set order, so collectors like service_mgr could
run before the PlatformFactCollect ('ansible_system', etc),
so the 'ansible_system' fact would not exist yet.
Depending on the collector and the deps, this can result
in incorrect behavior and wrong or missing facts.
To make the ordering of the collectors more consistent
and predictable, the code that builds that list is now
driven by the order of collectors in default_collectors.py,
and the rest of the code tries to preserve it.
* Flip the loops when building collector names
iterate over the ordered default_collectors list
selecting them for the final list in order instead
of driving it from the unordered collector_names set.
This lets the list returned by select_collector_classes
to stay in the same order as default_collectors.collectors
For collectors that have implicit deps on other fact collectors,
the default collectors can be ordered to include those early.
* default_collectors.py now uses a handful of sub lists of
collectors that can be ordered in default_collectors.collectors.
fixes#30753fixes#30623
* Use vault_id when encrypted via vault-edit
On the encryption stage of
'ansible-vault edit --vault-id=someid@passfile somefile',
the vault id was not being passed to encrypt() so the files were
always saved with the default vault id in the 1.1 version format.
When trying to edit that file a second time, also with a --vault-id,
the file would be decrypted with the secret associated with the
provided vault-id, but since the encrypted file had no vault id
in the envelope there would be no match for 'default' secrets.
(Only the --vault-id was included in the potential matches, so
the vault id actually used to decrypt was not).
If that list was empty, there would be an IndexError when trying
to encrypted the changed file. This would result in the displayed
error:
ERROR! Unexpected Exception, this is probably a bug: list index out of range
Fix is two parts:
1) use the vault id when encrypting from edit
2) when matching the secret to use for encrypting after edit,
include the vault id that was used for decryption and not just
the vault id (or lack of vault id) from the envelope.
add unit tests for #30575 and intg tests for 'ansible-vault edit'
Fixes#30575
* Fix 'distribution' fact for ArchLinux
Allow empty wasn't breaking out of the process_dist_files
loop, so a empty /etc/arch-release would continue searching
and eventually try /etc/os-release. The os-release parsing
works, but the distro name there is 'Arch Linux' which does
not match the 2.3 behavior of 'Archlinux'
Add a OS_RELEASE_ALIAS map for the cases where we need to get
the distro name from os-release but use an alias.
We can't include 'Archlinux' in SEARCH_STRING because a name match on its keys
but without a match on the content causes a fallback to using the first
whitespace seperated item from the file content as the name.
For os-release, that is in form 'NAME=Arch Linux'
With os-release returning the right name, this also supports the
case where there is no /etc/arch-release, but there is a /etc/os-release
Fixes#30600
* pep8 and comment cleanup
* Fix pkg_mgr fact on OpenBSD
Add a OpenBSDPkgMgrFactCollector that hardcodes pkg_mgr
to 'openbsd_pkg'. The ansible collector will choose the
OpenBSD collector if the system is OpenBSD and the 'Generic'
one otherwise.
This removes PkgMgrFactCollectors depenency on the
'system' fact being in collected_facts, which also
avoids ordering issues (if the pkg mgr fact is collected
before the system fact...)
Fixes#30623
* Fix nxos provider transport warning issue
* Add default value of transport arg in provider spec
* Remove default value if transport arg in top level spec
This ensure deprecation warning is seen only in case transport
is given as a top level arg in task
* Refactor nxos modules to reference transport value from provider
spec
* Fix unit test
* Remove transport arg assignment in nxos action plugin
* As assigning transport value is handled in provider spec
top level task arg assignment is no longer required
* Add Routing Engine Facts
- Map routing engine output information to routing_engines facts dict.
- Add fact 'has_2RE', which is a quick way to determine how many REs
the chassis has.
* Fix a typo
* Fix more typos
* Add slot number to routing_engine dict
* Add facts about the installed chassis modules
* Fix typo
* Fixed another typo
* Fix Path
* Change path again.
* More Typos
* Add some deubgging
* Add additional information for hardware components.
- Return information about the Routing Engines.
- Return a fact to easily determine if the device
has two routing engines.
- Return information about the hardware modules.
* Addressed pep8 stardard failures.
* Add unit test fixtures.
* Rename fixture.
* Fix unit test failures.
- Rename the fixture file to what the unit test expects.
- Strip out junos namespace attributes.
Rename file to match what the unit test expects.
* Scrubbed the routing engine serial numbers.
* Add unit test facts for new tests.
- Add unit test for ansible_net_routing_engines fact
- Add unit test for ansible_net_modules fact
- Add unit test for ansible_net_has_2RE
* Fixed spacing.
* Don't ask for password confirm on 'ansible-vault edit'
This is to match the 2.3 behavior on:
ansible-vault edit encrypted_file.yml
Previously, the above command would consider that a 'new password'
scenario and prompt accordingly, ie:
$ ansible-vault edit encrypted_file.yml
New Password:
Confirm New Password:
The bug was cause by 'create_new_password' being used for
'edit' action. This also causes the previous implicit 'auto prompt'
to get triggered and prompt the user.
Fix is to make auto prompt explicit in the calling code to handle
the 'edit' case where we want to auto prompt but we do not want
to request a password confirm.
Fixes#30491
Unittests are sometimes run without network connectivity in build
systems. Make that work correctly by mocking out _get_url_data with the
expected return value.
* This commit includes a unit test to exercise the _is_role
function and make sure it doesn't break in any Python version.
* Import os.path and other minor fixups
* module should fail if eos_user is added without configured_password or nopassword or sshkey
Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>
* fix eos_user unit test
Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>
* fix eos_user integration test
Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>
* Add FcoeNetworkFactsModule for retrieving HPE OneView FCoE Networks
- Allow querying for FCoE Network resources in HPE OneView
- Adds unit tests to new module
* Fix "required: no"
* Add NetworkSetFactsModule for retrieving HPE OneView Network Sets
- Allow querying for Network Set resources in HPE OneView
- Adds unit tests to new module
- Updates oneview_module_loader copyright header to short GPL3 version
* Adding possibility to pass in credentials as parameters
* Removed required false and changed format of filter_by_name declaration
* Updated examples in docs to reflect new way to pass in credentials
- All examples of the oneview_network_set_facts updated to use
credential parameters
- All required=False from oneview base module removed
- Shared docs updated to bring attention to API version being used
* Add the ability to modify shard count to kinesis_stream module
* Fixed an issue in kinesis_stream where update() reports not changed when it is changed
* Remove unreachable message and make the try and catch block shorter
* Tidy mount module for testing
Fix spelling mistakes in comments. I *think* the example for omitting parents
root has the wrong parent ID.
Make mountinfo file a parameter for testing.
* Don't strip leading slash from mounts
The current code does not follow the example, it produces src=tmp/aaa instead
of src=/tmp/aaa. This causes problems with bind mounts under /rootfs.
* Use dictionary to store mounts by ID
Instead of looping over each one to check if the ID matches. This does not
preserve the order of the output on < Python3.6, but that is not necessary.
* Make linux_mounts a dict
Always accessed by 'dst', so avoid looping by just making it a key.
* Add test case for get_linux_mounts
* make groups magic var dependant on inventory
it was overtly restricted by 'host'
minor fixes to test_var_manager.py, need to test other values also
* pepe hates extra blank line
- Fixes to lambda
- reformatting + tests for lambda_facts
- lambda module integration test
- switch lambda and lambda_facts to AnsibleAwsModule
- Get the account ID from STS, GetUser, and finally error message
* Added FcNetworkFactsModule to query FC Network Resources in HPE OneView
- Added unit tests
* Removing unnecessary quotes from example and documentation
* Module for uploading templates into vDirect server
Module for uploading configuration and workflow templates
into Radware vDirect server
* Module for uploading templates into vDirect server
Module for uploading configuration and workflow templates
into Radware vDirect server
* Add VPN module and unittests
* remove unnecessary imports
* fix documentation
* raise custom exception rather than passing module everywhere
* remove recordings
Rerecord tests
Fix docs
Ensure vpn_connection_id is a list of strings when checking if it exists
* fix check mode
* Rerecord tests
* remove superfluous code and comments and make exception handling uniform
fix docs
* Fix ec2_vpc_vpn documentation
* make ec2_vpc_vpn compatible with python 2.6 and make check mode logic more succinct
* fix comparison of list of dicts
* Fix typos and docstrings
make requested changes for imports
make code clearer
* Fix copyright and metadata version.
* Adding module to manage ethernet network on HPE OneView
* Adding unit tests to EthernetNetwork module
* Added OneViewModuleException custom exceptions to module
- Removed exception imports from hpOneView
- Updated unit tests
* Fixing mock import inside ethernet network module unit test
* Fixing issues found in METADATA by CI
* Updated paths to use solution name instead of vendor name
* Fixed documentation, removed redundant if and improved readability
* Updated _bulk_present to use and return `result`, same way as _present
* Changed __ to _ in private methods following ansible style
* Fixed some example inconsistencies and turned states doc into a list
* Added adriane-cardozo to list of maintainers
* New module for AWS Direct Connect connections
Unittests for new module
Added utils that will be used by other Direct Connect modules
* pep8 fixes
* Correct aws_direct_connect_connection EXAMPLES to be valid yaml
* Make requested changes
* remove use of the variable changed
get rid of unnecessary parentheses
* Fix unit test
* Rename variable.
* Fix metadata version
* Add module_utils/aws/direct_connect.py for frequently used functions
* new AWS Direct Connect link aggregation group module with tests and placebo recordings
* remove extra argument
* Remove use of undefined var
* Fix param name for extra exception codes for AWSRetry to use.
* Fix undefined var and line length and metadata version number
* Fix copyright headers
* Added new oneview_fcoe_network module and unit tests
* Fixing metadata issues and importing unittest from ansible.compat.tests
* Fixing shebang and adding correct copyright header
* Renamed remote_management/hpe to remote_management/oneview
* Updated documentation and default state according to review comments
- Added present as the default state
- Added delegate_to: localhost in all examples
- Changed config path from a variable to illustrate a location
- Other documentation fixes
* Added the ability to extend the exception list in CloudRetry
* AWSRetry boto and boto compatible
* Updated tests to reflect boto/boto3
* Added boto to shippable requirements
* Have base_class and added_exceptions default to None in CloudRetry
AWSRetry - only retry on boto3 exceptions and remove boto requirement from tests
* Make requested changes.
* refactors nxos_vrf_af module
fixes#27595
* fix up unit test cases
* add commands to result dict
* add route-target on afi create
* adds deprecation note to safi argument
* Add network value to support_by field.
* New support_by value, certified
* Deprecate curated in favor of certified
* Add conversion from 1.0 to 1.1 to metadata-tool
* Add supported by Red Hat field to ansible-doc output
* Ansible Config part2
- made dump_me nicer, added note this is not prod
- moved internal key removal function to vars
- carry tracebacks in errors we can now show tracebacks for plugins on vvv
- show inventory plugin tracebacks on vvv
- minor fixes to cg groups plugin
- draft config from plugin docs
- made search path warning 'saner' (top level dirs only)
- correctly display config entries and others
- removed unneeded code
- commented out some conn plugin specific from base.yml
- also deprecated sudo/su
- updated ssh conn docs
- shared get option method for connection plugins
- note about needing eval for defaults
- tailored yaml ext
- updated strategy entry
- for connection pliugins, options load on plugin load
- allow for long types in definitions
- better display in ansible-doc
- cleaned up/updated source docs and base.yml
- added many descriptions
- deprecated include toggles as include is
- draft backwards compat get_config
- fixes to ansible-config, added --only-changed
- some code reoorg
- small license headers
- show default in doc type
- pushed module utils details to 5vs
- work w/o config file
- PEPE ATE!
- moved loader to it's own file
- fixed rhn_register test
- fixed boto requirement in make tests
- I ate Pepe
- fixed dynamic eval of defaults
- better doc code
skip ipaddr filter tests when missing netaddr
removed devnull string from config
better becoem resolution
* killed extra space with extreeme prejudice
cause its an affront against all that is holy that 2 spaces touch each other!
shippable timing out on some images, but merging as it passes most
* prompt for new pass on create/encrypt if none specified
Make 'ansible-vault' edit or encrypt prompt for a password
if none or provided elsewhere.
Note: ansible-playbook does not prompt if not vault password
is provided
* dont show vault password prompts if not a tty
* Add config option for a default list of vault-ids
This is the vault-id equilivent of ANSIBLE_DEFAULT_PASSWORD_FILE
except ANSIBLE_DEFAULT_VAULT_IDENTITY_LIST is a list.
* Better handling of empty/invalid passwords
empty password files are global error and cause an
exit. A warning is also emitted with more detail.
ie, if any of the password/secret sources provide
a bogus password (ie, empty) or fail (exception,
ctrl-d, EOFError), we stop at the first error and exit.
This makes behavior when entering empty password at
prompt match 2.3 (ie, an error)
* [password] _random_password -> random_password and moved to util/encrypt.py
* [passwordstore] Use built-in random_password instead of pwgen utility
* [passwordstore] Add integration tests
1fe67f9 introduced retries to the ssh connection put file and fetch
file. Unfortunately, that change broke the smart transport because it
started raising exceptions instead of returning from _run(). This
breakage is documented in #23711.
An attempt to fix it was made at #23717 but the first attempt was
objected to as needing to touch too much code. The second attmept was
objected to as smart was forced to encapsulate retries (thus retrying
a sftp "rety" times before trying scp "retry" times and then finally
moving onto piped). This third attempt has retries encapsulate smart.
So each sub-transport is tried once and if all three fail, another retry
attempt is made which tries each of the three again.
Fixes#23711Fixes#23717
* replace boto with boto3 for the s3 module
make s3 pep8 and remove from legacy files
fix s3 unit tests
* fix indentation
* s3 module - if we can't create an MD5 sum return None and always upload file
* remove Location.DEFAULT which isn't used in boto3 and tidy up the docs
* pep8
* s3: remove default: null, empty aliases, and required: false from documentation
fix incorrectly documented defaults
* Porting s3 to boto3. Simplify some logic and remove unused imports
* Fix s3 module variables
* Fix a typo in s3 module and remove from pep8 legacy files
* s3: add pagination for listing objects.
Fix logic and use head_object instead of get_object for efficiency.
Fix typo in unit test.
* Fix pagination to maintain backwards compatibility.
Fix incorrect conditional.
Remove redundant variable assignment.
Fix s3 list_object pagination to return all pages
* Use the revised List Objects API as recommended.
* Wrap call to paginated_list in a try/except
Also remembered to allow marker/prefix/max_keys to modify what keys are listed
* Simplify argument
The prompt_formats dict didn't get the 'prompt_ask_vault_pass'
item added for interactive --ask-vault-pass, which
caused "KeyError: u'prompt_ask_vault_pass'"
Fixes#27885
* template: fix KeyError: 'undefined variable: 0
For compatibility with the Context.get_all() implementation
in jinja 2.9, make AnsibleJ2Vars implement collections.Mapping.
Also, make AnsibleJ2Template.newcontext() handle dict type
for the 'vars' parameter.
See: d67f0fd4cc
Fixes: https://github.com/ansible/ansible/issues/20494
* add units/template/test_vars
* intg tests for jinja-2.9 issues like 20494
test cases here are based on
https://github.com/ansible/ansible/issues/20494#issue-202108318
* nxos_bgp_neighbor_af does not want required_together
* fixup tests
* Fix max_prefix_* issues
* Require address-family
* Fix idempotency for next_hop_third_party
* Fix idempotency for allowas_in*
* Fix idempotency for *_in and *_out
* Reorder command generation again
`default` is first, then `max-prefix`, then booleans
* rm unneeded parens following assert
* rm unused parse_vaulttext_envelope from yaml.constructor
* No longer need index/enumerate over vault_ids
* rm unnecessary else
* rm unused VaultCli.secrets
* rm unused vault_id arg on VaultAES.decrypt()
pylint: Unused argument 'vault_id'
pylint: Unused parse_vaulttext_envelope imported from ansible.parsing.vault
pylint: Unused variable 'index'
pylint: Unnecessary parens after 'assert' keyword
pylint: Unnecessary "else" after "return" (no-else-return)
pylint: Attribute 'editor' defined outside __init__
* use 'dummy' for unused variables instead of _
Based on pylint unused variable warnings.
Existing code use '_' for this, but that is old
and busted. The hot new thing is 'dummy'. It
is so fetch.
Except for where we get warnings for reusing
the 'dummy' var name inside of a list comprehension.
* Add super().__init__ call to PromptVaultSecret.__init__
pylint: __init__ method from base class 'VaultSecret' is not called (super-init-not-called)
* Make FileVaultSecret.read_file reg method again
The base class read_file() doesnt need self but
the sub classes do.
Rm now unneeded loader arg to read_file()
* Fix err msg string literal that had no effect
pylint: String statement has no effect
The indent on the continuation of the msg_format was wrong
so the second half was dropped.
There was also no need to join() filename (copy/paste from
original with a command list I assume...)
* Use local cipher_name in VaultEditor.edit_file not instance
pylint: Unused variable 'cipher_name'
pylint: Unused variable 'b_ciphertext'
Use the local cipher_name returned from parse_vaulttext_envelope()
instead of the instance self.cipher_name var.
Since there is only one valid cipher_name either way, it was
equilivent, but it will not be with more valid cipher_names
* Rm unused b_salt arg on VaultAES256._encrypt*
pylint: Unused argument 'b_salt'
Previously the methods computed the keys and iv themselves
so needed to be passed in the salt, but now the key/iv
are built before and passed in so b_salt arg is not used
anymore.
* rm redundant import of call from subprocess
pylint: Imports from package subprocess are not grouped
use via subprocess module now instead of direct
import.
* self._bytes is set in super init now, rm dup
* Make FileVaultSecret.read_file() -> _read_file()
_read_file() is details of the implementation of
load(), so now 'private'.
Fix 'module' object is not callable
* rhn_register: fix Python 3 compatibility
* rhn_register: update requirements
* rhn_register: add unit tests
* Add missing method name
* use a dedicated line for XML related requirements
* rhn_register: drop support for Python 2.4
* rhn_register unit tests: fix Python 3 compatibility
* refactor in order to check order of the requests
* Fix for issue ansible/ansible#27715
* Also fixing mutually exclusive check
* Updating subspec checks
These changes take into account a spec with all features enabled and do
the following tests for subspecs:
1. Test proper specs
2. Test Alias
3. Test missing required param
4. Test mutually exclusive params
5. Test required if params
6. Test required one of params
7. Test required together params
8. Test required if params with a default value
9. Test basis subspec params
10. Test invalid subsec params
* adds new filter plugins for network use cases
* adds parse_cli filter
* adds parse_cli_textfsm filter
* adds Template class to network_common
* adds conditional function to network_common
* fix up PEP8 issues
* s3_bucket: fix policy sorting for python3 so strings are evaluated as less than tuples.
Add tests to ensure this behavior is maintained.
* Fix s3_bucket comparison function to work on both Python 3.5 and 3.6
* s3_bucket: document that cmp_to_key is used for python 2.7.
Add another test for s3_bucket to compare policies of different sizes.
* fix pep8
* Work around code-smell grepping by not using the word 'cmp'.
* New module for managing AWS Datapipelines
* Supports create/activate/deactivate and deletion
* Handles idempotent creation by embeding the version in the
uniqueId field
* Waits for requested state to be reached, as Botocore doesn't
have waiters yet for datapipelines
* rename module, fix imports, add tags option, improve exit_json results, fix a couple bugs, add a TODO so I don't forget
fix pep8
allow timeout to be used for pipeline creation
make .format syntax uniform
fix pep8
fix exception handling
allow pipeline to be modified, refactor, add some comments, remove unnecessary imports
pipeline activation may not be in the activated state long
remove datapipeline version option
change a loop to a list comprehension
create idempotence by hashing the options given to the module minus the objects (which can be modified)
small bugfix
* data_pipeline unittests
make unittests pep8
fix bug in unittests
* remove exception handling that serves no purpose
* Fix python3 incompatibilities in datapipeline tests and add placebo fixture maybe_sleep for faster tests
Fix python3 incompatibilities in data_pipeline build_unique_id()
Don't delete a pipeline in diff_pipeline() because it's unexpected
Don't use time.time() because it causes an issue with placebo testing
re-recorded tests
fix pep8 in data_pipeline
Remove disable_rollback from tests
Make sure unique identifier is a string
re-record tests
* improve documentation and add another example
* use a placebo fixture instead of redundant code in tests
fix tests for PLACEBO_RECORD=false
* Fix data_pipeline docs
use isinstance instead of type()
fix documentation
* fix documentation
* Remove use of undefined variable from data_pipeline module and fix license
* fix copyright header
* Initial commit for integration of HPE OneView resources with Ansible Core. Adding FC Network and FC Network Fact modules and unit tests, and OneView base class for all OV resources.
previously gather_subset=['!all'] would still gather the
min set of facts, and there was no way to collect no facts.
The 'min' specifier in gather_subset is equilivent to
exclude the minimal_gather_subset facts as well.
gather_subset=['!all', '!min'] will collect no facts
This also lets explicitly added gather_subsets override excludes.
gather_subset=['pkg_mgr', '!all', '!min'] will collect only the pkg_mgr
fact.
* Add module cv_server_provision for integration with Arista CloudVision Portal.
* Doc update.
* Remove shebang from test file. Update short description with company and product name.
* Update exception syntax to Python3 style.
* Remove blank line between imports.
* Remove newlines from RETURN documentation.
* Add cvprac to unittest requirements.
* Update unittest format. Add a few additional tests.
* Mock exceptions from cvprac so the library is not needed for unittests.
* Mock cvprac imports.
* Update unit tests to support python 3.5.
* Mock full cvprac library for unittests.
* Update Jinja2 import to pass updated CI checks.
* Update cvprac imports format for new CI tests.
* Add __metaclass__ and __future__.
When parsing a vaulttext blob, use .splitlines()
instead of split(b'\n') to handle \n newlines and
windows style \r\n (CRLF) new lines.
The vaulttext enevelope at this point is just the header line
and a hexlify()'ed blob, so CRLF is a valid newline here.
Fixes#22914
* Added new module interfaces_file
* interfaces_file: added unit tests
* interfaces_file: added golden files for unit tests
* interfaces_file: moved to system modules
* interfaces_file: fixed code formatting and convention issues
* Add 2.0-2.3 facts api compat (ansible_facts(), get_all_facts())
These are intended to provide compatibilty for modules that
use 'ansible.module_utils.facts.ansible_facts' and
'ansible.module_utils.facts.get_all_facts' from 2.0-2.3 facts
API.
Fixes#25686
Some related changes/fixes needed to provide the compat api:
* rm ansible.constants import from module_utils.facts.compat
Just use a hard coded default for gather_subset/gather_timeout
instead of trying to load it from non existent config if the
module params dont include it.
* include 'external' collectors in compat ansible_facts()
* Add facter/ohai back to the valid collector classes
facter/ohai had gotten removed from the default_collectors
class used as the default list for all_collector_classes by
setup.py and compat.py
That made gather_subset['facter'] fail.
* Add aggregate parameter validation
aggregate parameter validation will support checking each individual dict
to resolve conditions for aliases, no_log, mutually_exclusive,
required, type check, values, required_together, required_one_of
and required_if conditions in argspec. It will also set default values.
eg:
tasks:
- name: Configure interface attribute with aggregate
net_interface:
aggregate:
- {name: ge-0/0/1, description: test-interface-1, duplex: full, state: present}
- {name: ge-0/0/2, description: test-interface-2, active: False}
register: response
purge: Yes
Usage:
```
from ansible.module_utils.network_common import AggregateCollection
transform = AggregateCollection(module)
param = transform(module.params.get('aggregate'))
```
Aggregate allows supports for `purge` parameter, it will instruct the module
to remove resources from remote device that hasn’t been explicitly
defined in aggregate. This is not supported by with_* iterators
Also, it improves performace as compared to with_* iterator for network device
that has seperate candidate and running datastore.
For with_* iteration the sequence of operartion is
load-config-1 (candidate db) -> commit (running db) -> load_config-2
(candidate db) -> commit (running db) ...
With aggregate the sequence of operation is
load-config-1 (candidate db) -> load-config-2 (candidate db) -> commit
(running db)
As commit is executed only once per task for aggregate it has
huge perfomance benefit for large configurations.
* Fix CI issues
* Fix review comments
* Add support for options validation for aliases, no_log,
mutually_exclusive, required, type check, value check,
required_together, required_one_of and required_if
conditions in sub-argspec.
* Add unit test for options in argspec.
* Reverted aggregate implementaion.
* Minor change
* Add multi-level argspec support
* Multi-level argspec support with module's top most
conditionals options.
* Fix unit test failure
* Add parent context in errors for sub options
* Resolve merge conflict
* Fix CI issue
* Make camel_to_snake work on capitalized plurals
`TargetGroupARNs` should become `target_group_arns`, not
`target_group_ar_ns`
Promote `camel_to_snake` to top layer function but prefix
it with an underscore.
Add tests for improved `_camel_to_snake` function.
Reduce use of `re.compile` as it makes no sense when the
compilation result is not reused.
* Remove unused LooseVersion check
* Fix PLURALs case for camel_to_snake
Also renamed EXPECTED_CAMELIZATION to EXPECTED_SNAKIFICATION
* ACI module_utils library for ACI modules
This PR includes:
- the ACI argument_spec
- an aci_login function
- an experimental aci_request function
- an aci_response function
- included the ACI team
* New prototype using ACIModule
This PR includes:
- A new ACIModule object with various useful methods
Fixes#13243
** Add --vault-id to name/identify multiple vault passwords
Use --vault-id to indicate id and path/type
--vault-id=prompt # prompt for default vault id password
--vault-id=myorg@prompt # prompt for a vault_id named 'myorg'
--vault-id=a_password_file # load ./a_password_file for default id
--vault-id=myorg@a_password_file # load file for 'myorg' vault id
vault_id's are created implicitly for existing --vault-password-file
and --ask-vault-pass options.
Vault ids are just for UX purposes and bookkeeping. Only the vault
payload and the password bytestring is needed to decrypt a
vault blob.
Replace passing password around everywhere with
a VaultSecrets object.
If we specify a vault_id, mention that in password prompts
Specifying multiple -vault-password-files will
now try each until one works
** Rev vault format in a backwards compatible way
The 1.2 vault format adds the vault_id to the header line
of the vault text. This is backwards compatible with older
versions of ansible. Old versions will just ignore it and
treat it as the default (and only) vault id.
Note: only 2.4+ supports multiple vault passwords, so while
earlier ansible versions can read the vault-1.2 format, it
does not make them magically support multiple vault passwords.
use 1.1 format for 'default' vault_id
Vaulted items that need to include a vault_id will be
written in 1.2 format.
If we set a new DEFAULT_VAULT_IDENTITY, then the default will
use version 1.2
vault will only use a vault_id if one is specified. So if none
is specified and C.DEFAULT_VAULT_IDENTITY is 'default'
we use the old format.
** Changes/refactors needed to implement multiple vault passwords
raise exceptions on decrypt fail, check vault id early
split out parsing the vault plaintext envelope (with the
sha/original plaintext) to _split_plaintext_envelope()
some cli fixups for specifying multiple paths in
the unfrack_paths optparse callback
fix py3 dict.keys() 'dict_keys object is not indexable' error
pluralize cli.options.vault_password_file -> vault_password_files
pluralize cli.options.new_vault_password_file -> new_vault_password_files
pluralize cli.options.vault_id -> cli.options.vault_ids
** Add a config option (vault_id_match) to force vault id matching.
With 'vault_id_match=True' and an ansible
vault that provides a vault_id, then decryption will require
that a matching vault_id is required. (via
--vault-id=my_vault_id@password_file, for ex).
In other words, if the config option is true, then only
the vault secrets with matching vault ids are candidates for
decrypting a vault. If option is false (the default), then
all of the provided vault secrets will be selected.
If a user doesn't want all vault secrets to be tried to
decrypt any vault content, they can enable this option.
Note: The vault id used for the match is not encrypted or
cryptographically signed. It is just a label/id/nickname used
for referencing a specific vault secret.
* Module argument_spec now accepts a callable for the type argument, which is passed through and called with the value when appropriate. On validation/conversion failure, the name of the callable (or its type as a fallback) is used in the error message.
* adds basic smoke tests for custom callable validator functionality
* Enable the pylint no-name-in-module check. Checks that identifiers in
imports actually exist. When we do this, we also have to ignore
_MovedItems used in our bundled six. This means pylint won't check
for bad imports below ansible.module_utils.six.moves but that's
something that pylint punts on with a system copy of six so this is
still an improvement.
* Remove automatic use of system six. The exec in the six code which
tried to use a system library if available destroyed pylint's ability
to check for imports of identifiers which did not exist (the
no-name-in-module check). That test is important enough that we
should sacrifice the bundling detection in favour of the test.
Distributions that want to unbundle six can replace the bundled six in
ansible/module_utils/six/__init__.py to unbundle. however, be aware
that six is tricky to unbundle. They may want to base their efforts
off the code we were using:
2fff690caa/lib/ansible/module_utils/six/__init__.py
* Update tests for new location of bundled six Several code-smell tests
whitelist the bundled six library. Update the path to the library so
that they work.
* Also check for basestring in modules as the enabled pylint tests will
also point out basestring usage for us.
* Nuage module and unit tests with requested changes
* Cleanup of imports
* Adding check on python version
* Adding import try and catch wrappers
* Cleanup of requirements and adding integration tests
* Using pypi package for simulator
* Cleanup of requirements and adding integration tests
* Adding aliases for integration tests
* Adding module to import sanity test skip list
* Revert "Adding module to import sanity test skip list"
This reverts commit eab23af8c5ca7c503af63c05610b5db66d31fae4.
* Adding check for importlib and cleanup of requirements
* Move tests to their own file
* Port to a pytest parametrized test so it's easier to define new tests
* Now that _symbolic_mode_to_octal is a classmethod, we don't have to
instantiate an AnsibleModule to test it.
* Add tests for #14994, having more than one operator per role and umask
chmod
* add unit test: nested dynamic includes
* nested dynamic includes: avoid AnsibleFileNotFound error
Error was:
Unable to retrieve file contents
Could not find or access 'include2.yml'
Before 8f758204cf, at the end of
'path_dwim_relative' method, the 'search' variable contained amongst
others paths:
'/tmp/roles/testrole/tasks/tasks/included.yml' and
'/tmp/roles/testrole/tasks/included.yml'.
The commit mentioned before removed the last one despite the method
docstrings specify 'with or without explicitly named dirname subdirs'.
* add integration test: nested includes
* Adding ciscowlc_command module and unit tests.
* Adding __init__.py for unit test.
* Fixing PEP8 W503.
* Renaming module from ciscowlc_command to aire_command.
* Renaming aire_command to aireos_command.
* Adding aruba_command module along with unit tests.
* Fixing PEP8 E303 too many blank lines.
* Adding default for timeout.
* Removing unused arguments. Moving default for timeout argument. Fixing cliconf to find hostname.
* Fixing PEP8 E302.
* Add unit tests for parted module
Test the current expected behavior of the module:
- mock parted() and get_device_info()
- Use some of the examples and test the 'script' passed to parted.
- mock check_parted_label() to return false, as if parted version is > 3.1
- assert get_device_info output is correct
Current implementation of the module runs parted several time while going
through all parameters (flags, name, ...). Between calls it uses get_device_info
to update the dictionary. Use check_mode for some of the tests to force module
to go through all the parameters even is dictionary is not updated.
* test_parted.py: add "name" param into expected results
since 78fff751ab, parse_partition_info
fetch the partition name. This commit adds 'name' key and value into
the expected results.
Consolidate the module_utils, constants, and config functions that
convert values into booleans into a single function in module_utils.
Port code to use the module_utils.validate.convert_bool.boolean function
isntead of mk_boolean.
* aci_rest: New module to access Cisco ACI
This PR includes:
- Relicense as GPLv3+
- Check-mode support
- Cosmetic changes to documentation
- Examples in YAML format
- Removal of incorrect requirements (for this module)
- Do not log passwords
- Implement native fetch_url instead of requests
- Use standard hostname, username and password parameters
- Add alias src for parameter config_file
- Add mutual exclusive content option for inline data (and show some inline examples)
- Add timeout parameter
- Add validate_certs parameter
- Handling ACI result output (identical for JSON as XML input)
- Parse/expose ACI error output to user
* Lower case method, add use_ssl, Use python dicts
This commit includes:
- Use lowercase method names
- Add `use_ssl` parameter (not the `protocol` parameter)
- Use a python dict for the request data (not a JSON string)
- Documentation improvements
* Ensure one of 'content' or 'src' is provided
* Fix issue with totalCount being a string in JSON
This fixes the problem with JSON output where totalCount is a string and
not an integer.
This fixesjedelman8/aci-ansible#7
* Improve code documentation
* Improve error handling and module response
* Small typo
* Improve documentation and examples
* Keep protocol parameter, but deprecate it
* Extrude aci functions from module_utils
* aci_rest: Add unit tests
* add first, last and next usable
* add usable ip filters
* add size usable, range usable and wildcard
* add ip prefix and netmask filter
* add network formatting and check if ip in subnet
* clean up order, add comments
* fix pep8
* update format by index
* clean up and updates from jmcgill298
* adds more intelligent save logic and diff to network config modules
* adds sha1 property to NetworkConfig
* adds new argument save_when to argument_spec
* adds new argument diff_against to argument_spec
* adds new argument intended_config to argument_spec
* renames config argument to running_config with alias to config
* deprecates the use of the save argument
* before and after now work with src argument
* misc module clean
Modules updated
* nxos_config
* ios_config
* eos_config
Most notably this makes the save mechanism more intelligent for config
modules for devices that need to copy the ephemeral config to
non-volatile storage.
The diff_against argument allows the playbook task to control what the
device's running-config is diff'ed against. By default it will return
the diff of the startup-config.
* removes ios_config from pep8/legacy_files.txt
* extends the ignore lines argument to the module
* clean up CI errors
* add missing list brackets
* fixes typo
* fixes unit test cases
* remove last line break when returning config contents
* encode config string to bytes before hashing
* fix typo
* addresses feedback in PR
* update unit test cases
It was in lib/ansible/modules/system/setup.py since it
was the only thing using it, but move it back to module_utils
and add a ansible_collector.get_ansible_collector() to build
a facts collector just like the one used by setup.py
mv test_setup.py -> test_ansible_collector.py
All the code it was testing is now in ansible_collector
rm code to create 'ansible_facts' subkey from namespace
Just leave it up to the caller to do, and just return a
flat dictionary from AnsibleFactCollector.collect()
* junos_linkagg implementation and junos modules refactor
* junos_linkagg implementation
* junos_linkagg integration test
* net_linkagg integration test for junos
* decouple `load_config` and `commit` operations,
to allow single commit (in case on confirm commit) and
to perform batch commit (multiple `load_config` followed by single
`commit`)
* Other related refactor
* Fix CI issues
* Fix unit test failure
The iApp service module worked fine previously, but this patch
adds enhancements to it to include more fields that can be
specified when creating iapp services.
restored 'rc' inspection but only when failed is not specified
removed redundant changed from basic.py as task_executor already adds
removed redundant filters, they are tests
added aliases to tests removed from filters
fixed test to new rc handling
* Fix ansible-doc traceback when a plugin doesn't parse correctly
* Change extract_metadata ivocation to take either an ast or source
code. When given source code, it can find file offsets for the start
and end of dict. When given the ast, it is quicker as it doesn't have
to reparse the source. Requires changing the call to the function to
use a keyword arg.
* Fix reading of metadata to find the last occurrence of
ANSIBLE_METADATA instead of the first.
* Add some more unittests to get closer to complete coverage
* Unittests for extracting metadata from plugins
* Port plugin_docs to use the generic extract_metadata function
* Make the helper functions seek_end_of{string,dict} private
So I thought I fixed it before, but there's still one location where
the `rc` value is influential to decide whether a task failed or not.
We already established in #24867 that it is up to the module to decide
what the return code actually means, not the task executor. We modified
the existing modules to move that logic into the module (eg. for
command, shell, etc.)
This relates to the integration tests of win_robocopy, where different
return codes have different meanings:
- 0 -- No files copied.
- 1 -- Files copied successfully! (changed)
- 2 -- Some Extra files or directories were detected. No files were copied. (warning)
- 3 -- (2+1) Some files were copied. Additional files were present. (changed)
- 4 -- Some mismatched files or directories were detected. Housekeeping might be required! (changed + warning)
- 5 -- (4+1) Some files were copied. Some files were mismatched. (changed + warning)
- 6 -- (4+2) Additional files and mismatched files exist. No files were copied. (warning)
- 7 -- (4+1+2) Files were copied, a file mismatch was present, and additional files were present. (changed + warning)
- 8 -- Some files or directories could not be copied! (changed + failed)
- 9 - 15 -- Fatal error. Check log message! (failed)
- 16 -- Serious Error! No files were copied! Do you have permissions to access $src and $dest? (failed)
This also fixes#24652
* Extend tests to have multiple device representations
* Move filepath munging to nxos_module
* Device needs to be kwarg so we can leave it off
* Update other nxos tests
* Update tests that fell through
Make pyca/cryptography the preferred backend for cryptographic needs (mainly vault) falling back to pycrypto
pyca/cryptography is already implicitly a dependency in many cases
through paramiko (2.0+) as well as the new openssl_publickey module,
which requires pyOpenSSL 16.0+. Additionally, pyca/cryptography is
an optional dep for better performance with vault already.
This commit leverages cryptography's padding, constant time comparisons,
and CBC/CTR modes to reduce the amount of code ansible needs to
maintain.
* Handle wrong password given for VaultAES format
* Do not display deprecation warning for cryptography on python-2.6
* Namespace all of the pycrypto imports and always import them
Makes unittests better and the code less likely to get stupid mistakes
(like using HMAC from cryptogrpahy when the one from pycrypto is needed)
* Add back in atfork since we need pycrypto to reinitialize its RNG just in case we're being used with old paramiko
* contrib/inventory/gce: Remove spurious require on pycrypto
(cherry picked from commit 9e16b9db275263b3ea8d1b124966fdebfc9ab271)
* Add cryptography to ec2_win_password module requirements
* Fix python3 bug which would pass text strings to a function which
requires byte strings.
* Attempt to add pycrypto version to setup deps
* Change hacking README for dual pycrypto/cryptography
* update dependencies for various CI scripts
* additional CI dockerfile/script updates
* add paramiko to the windows and sanity requirement set
This is needed because ansible lists it as a requirement. Previously
the missing dep wasn't enforced, but cryptography imports pkg_resources
so you can't ignore a requirement any more
* Add integration test cases for old vault and for wrong passwords
* helper script for manual testing of pycrypto/cryptography
* Skip the pycrypto tests so that users without it installed can still run the unittests
* Run unittests for vault with both cryptography and pycrypto backend
* adds new common functions for declarative intent modules
* adds Entity and EntityCollection
* adds dict_diff and dict_combine
* update for CI PEP8 compliance
* more CI PEP8 fixes
* more PEP8 CI clean up
* refactors the lambda assignments into top level classes
this is to be in compliant the PEP8 CI sanity checks
* one last pep8 ci fix
* Add nxos_nxapi tests
* Simple changes to nxos_nxapi
* Move validation to check_args
* Don't mark protocol change unless change is requested
* Add different regex to handle HTTP{,S} ports on a different version of nxos
finished normalizing of path handling
removed overloaded '-p' from init_paths option, it is for role_paths
removed expand_tilde and get_opt methods as both were redundant, adjusted rest of code
updated tests to match
* Add vyos_user implementation module
Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>
* Integration test for vyos_user
Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>
* Make state absent work
Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>
* Unit test for vyos_user
Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>
* Standardize user names
Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>
* Modify integration test with idempotent case
Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>
* Add role as alias to level
Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>
* Start of ansible config project
moved configuration definitions to external yaml file vs hardcoded
* updated constants to be a data strcutures that are looped over and also return origin of setting
changed to manager/data scheme for base classes
new cli ansible-config to view/manage ansible configuration settings
* prints green for default/unchanged and yellow for those that have been overriden
* added list action to show all configurable settings and their associated ini and env var names
* allows specifying config file to see what result would look like
* TBD update, edit and view options
removed test for functions that have been removed
env_Vars are now list of dicts
allows for version_added and deprecation in future
added a couple of descriptions for future doc autogeneration
ensure test does not fail if delete_me exists
normalized 'path expansion'
added yaml config to setup packaging
removed unused imports
better encoding handling
updated as per feedback
* pep8
* Add more mount point statvfs info including sizes
Based on https://github.com/ansible/ansible/pull/12073
facts.utils.get_mount_size() now returns a dict of most
of the posix statvfs data, including block_size and inode
counts.
Update the facts.hardware classes that use get_mount_size() to
use the new info by mount_info.update(mount_statvfs_inof) to merge.
* add back unit tests for LinuxHardware mount/fs facts
* add test cases for facts.utils.get_mount_size
* Support NetBSD 7.1+ style ifconfig -a output
network facts on NetBSD after 7.1 cvs would fail
because of format changes in 'ifconfig -a' output.
update code to support new and old format.
add unit tests for both based on
examples from Bruce V Chiarelli.
* wrap use of interfaces.keys() in list() for py3 compat
* sort interface ids for stability
* Fix ansible_cmdline initrd fact for UEFI
UEFI cmdline paths use \ path sep which would
get munged by cmdline fact collection.
* Make CmdLineFactCollector easier to test
extract the parsing of the /proc/cmdline content to
_parse_proc_cmdline()
add a wrapper method for get_file_content _get_proc_cmdline()
Add unit tests of _parse_proc_cmdline based on examples
from issue #23647Fixes#23647
* netscaler_service initial implementation
* Changes as requested by reviewers
* Skip some tests if under python2.6 and importing requests library
* Change option "operation" to "state"
* Remove print statements from netscaler module utils
* Catch all exceptions during login
* Fix fail message
* Add common option save_config
When operating on arbitrary return data from modules, it is possible to
hit the recursion limit when cleaning out no_log values from the data.
To fix this, we have to switch from recursion to iteration.
Unittest for remove_values recursion limit
Fixes#24560
* Ultra basic api-gateway module based of lambda.py
* Ultra basic deployment added to api-gateway module
* ApiGateway module Allow creation of APIs, more documentation and better return value
* ApiGateway module incorporate review feedback
* ApiGateway module flake8 cleanup
* APIGateway module - more review fixes.
* slightly better messages in api_gateway module
* AWS api_gateway module - try to improve messages in case of exceptions
* rename api_gateway module to aws_api_gateway as discussed in PR 20230
* aws_api_gateway - Allow delivery of swagger either as text or dictionary.
* aws_api_gateway module - introduce 'unit' tests, improve imports using them and small fixes
* aws_api_gateway module - move path expand_user to avoid early typecheck
* aws_api_gateway - version means version of metadata not module - fix to 1.0
* aws_api_gateway module - Rely on module_utils.ec2 for imports & path type for expanduser / cleanups
* aws_api_gateway module - heavy cleanup and refactor of code + cloud retry functionality.
* api_gateway_module - failing test case for handling more than one deployment in succession and API deletion
* add TooManyRequestsException to AWSRetry exception list - makes API deployment work.
* api_gateway_module - Fixes for various review comments + errors from various linters
* api_gateway_module - Fixes for more review comments + linter error
* api_gateway_module - Major refactor into sensible functions - create_response becomes configure_response
* api_gateway_module - should be working under python3; remove test exclusion
* api_gateway_module - finish off remaining review fixes - use ansible defaults and fix mutually exclusive
* api_gateway_module - attempt to improve handling of botocore errors in python3
* api_gateway_module - implement state=absent / API deletion
Facts Refresh (2.4 roadmap)
This commit implements most of the 2.4 roadmap 'Facts Refresh'
- move facts.py to facts/__init__.py
- move facts Distribution() to its own class
- add a facts/utils.py
- move get_file_content and get_uname_version to facts/utils.py
- move Facts() class from facts/__init__ to facts/facts.py
- mv get_file_lines to facts/utils.py
- mv Ohai()/Facter() class to facts/ohai.py and facter.py
- Start moving fact Hardware() classes to facts/hardware/*.py
- mv HPUX() hardware class to facts/hardware/hpux.py
- move SunOSHardware() fact class to facts/hardware/sunos.py
- move OpenBSDHardware() class to facts/hardware/openbsd.py
- mv FreeBsdHardware() and DragonFlyHardware() to facts/hardware/
- mv NetBSDHardware() to facts/hardware/netbsd.py
- mv Darwin() hardware class to facts/hardware/darwin.py
- pep8/etc cleanups on facts/hardware/*.py
- Mv network facts classes to facts/network/*.py
- mv Virtual fact classes to facts/virtual
- mv Hardware.get_sysctl to facts/sysctl.py:get_sysctl
- Also mv get_uname_version from facts/utils.py -> distribution.py
since distribution.py is the only thing using it.
- add collector.py with new BaseFactCollector
- add a subclass for AnsibleFactCollector
- hook up dict key munging FactNamespaces
- add some test cases for testing the names of facts
- mv timeout stuff to facts.timeout
- rm ansible_facts()/get_all_facts() etc
- Instead of calling facts.ansible_facts(), fact collection
api used by setup.py is now to create an AnsibleFactCollector()
and call it's collect method.
- replace Facts.get_user_facts with UserFactCollector
- add a 'systems' facts package, mv UserFactCollector there
- mv get_dns_facts to DnsFactCollector
- mv get_env_facts to EnvFactCollector
- include the timeout length in exception message
- modules and module_utils that use AnsibleFactCollector
can now theoretically set the 'valid_subsets'
May be useful for network facts module that currently have
to reimplement a good chunk of facts.py to get gather_subsets
to work.
- get_local_facts -> system/LocalFactCollector
- get_date_time -> system/date_time.py
- get_fips_facts -> system/fips.py
- get_caps_facts() -> system/caps.py
- get_apparmor_facts -> system/apparmor.py
- get_selinux_facts -> system/selinux.py
- get_lsb_facts -> system/lsb.py
- get_service_mgr_facts -> system/service_mgr.py
- Facts.is_systemd_managed -> system/service_mgr.py
- get_pkg_mgr_facts -> system/pkg_mgr.py
- Facts()._get_mount_size_facts() -> facts.utils.get_mount_size()
- add unit test for EnvFactCollector
- add a test case for minimal gather_subsets
- add test case for collect_ids
- Make gather_subset match existing behavior or '!all'
If 'gather_subset' is provided as '!all', the existing behavior
(in 2.2/2.3) is that means 'dont collect any facts except those
from the Facts() class'. So 'skip everything except
'apparmor', 'caps', 'date_time', 'env', 'fips', 'local', 'lsb',
'pkg_mgr', 'python', 'selinux', 'service_mgr', 'user', 'platform', etc.
The new facts setup was making '!all' mean no facts at all, since
it can add/exclude at a finer granularity. Since that makes more
sense for the ansible collector, and the set of minimal facts to
collect is really more up to setup.py to decide we do just that.
So if setup.py needs to always collect some gather_subset, even
on !all, setup.py needs to have the that subset added to the
list it passes as minimal_gather_subset.
This should fix some intg tests that assume '!all' means that
some facts are still collected (user info and env for example).
If we want to make setup.py collect a more minimal set, we can do that.
- force facts_dicts.keys() to a list so py3 works
- split fact collector tests to test_collectors.py
- convert Facter(Facts) -> other/facter.py:FacterFactCollector
- add FactCollector.collect_with_namespace()
regular .collect() will return a dict with the key names
using the base names ('ip_address', 'service_mgr' etc)
.collect_with_namespace() will return a dict where the key names
have been transformed with the collectors namespace, if there is
one. For most, this means a namespace that adds 'ansible_' to the
start of the key name.
For 'FacterFactCollector', the namespace transforms the key to
'facter_*'.
- add test cases for collect_with_namespace
- move all the concrete 'which facts does setup.py' stuff to setup.py
The caller of AnsibleFactCollector.from_gather_subset() needs to
pass in the list of collector classes now.
- update system/setup.py to import all of the fact classes and pass
in that list.
- split the Distribution fact class up a bit
extracted the 'distro release' file handling (ie, linux
boxes with /etc/release, /etc/os-release etc) into its
own class.
- extract get_cmdline_facts -> cmdline.py
- extract get_public_ssh_host_keys -> system/ssh_pub_keys.py
- extract get_platform_facts -> system/platform.py
platform.py may be a good candidate for further splitting.
- rm test for plain Facts() base class
- let the base class for Collector unit tests provide collected_facts
some Collectors and/or their migrated Facts() subsclasses need
to look at facts collected by other modules ('ansible_architecture'
the main one...).
Collector.collect() has the collected_facts arg for this, so add
a class variable to BaseFactsTest so we can specify it.
- mv Ohai to other/ohai.py and convert to Collector
- update hardware/*.py to return facts (no side effects)
- mv AnsibleFactCollector to setup.py
- extra collector class gathering to module method in
facts/__init__.py (collector_classes_from_gather_subset)
- add a CollectorMetaDataCollector collector used to provide
the 'gather_setup' fact
- add unit test module for 'setup' module
(test/units/modules/system/setup.py)
- Collector init now doesnt need a module, but collect does
An instance of a FactCollector() isnt tied to a AnsibleModule
instance, but the collect() method can be, so optionally pass
in module to FactCollector.collect() (everywhere)
- add a default_collectors for list of default collectors
import and use it from setup.py module
eventually, would like to replace this with a plugin loader
style class finder/loader
- unit tests for module_utils/facts/__init__.py
- add unit tests for ohai facts collector
- remove self.facts side effect on populate() in hardware/sunos.py
- convert OpenBSDHardware() to rm side effects on self.facts
- try to rm some self.facts side effects in Network()
plumb in collected_facts from populate() where it is needed.
stop passing collected_facts into Network() [via cached_facts=,
where it eventually becomes self.facts]
- nothing provides Fact() cached_facts arg now, rm it
Facts() should be internal only implementation so nothing
should be using it.
Of course, now someone will.
- add a Collector.name attr to build a map of name->_fact_ids
To properly exclude a gather_subset spec like '!hardware', we
need to know that 'hardware' also means 'devices', 'dmi', etc.
Before, '!hardware' would remove the 'hardware' collector name
but not 'devices'. Since both would end up in id_collector_map,
we would still end up with the HardwareCollector in the collector
list. End result being that '!hardware' wouldn't stop hardware
from being collected.
So we need to be able to build that map, so add the Collector.name
attribute that is the primary name (like 'hardware') and let
Collector._fact_ids be the other fact ids that a collector is
responsible for.
Construct the aliases_map of Collector.name -> set of _fact_ids
in fact/__init__.py get_collector_names, and use it when we are
populating the exclude set.
- refactor of distribution.py
make the big OS_FAMILY literal a little easier to read
Also keys can now be any string instead of python literals
99% sure the test for 'KDE Neon' was wrong
I don't see how/where it should or could get 'Neon' instead
of 'KDE Neon' as provided in os-release NAME=
Use 'distribution' string for key to OS_MAP
ie, we dont need to make it a valid python label anymore so dont.
move _has_dist_file to module as _file_exists
easier to mock without mucking with os.path
mv platform.system() calls to within get_distribution_facts() instead
of Distribution() init.
- remove _json compat module
The code in here was to support:
-a 'json' python module that was not the standard one included
with python since 2.6.
- potentially fallback to simplejson if 'json' was not available.
'json' is available for all supported python versions now so
no longer needed.
- mv get_collector_names -> facts.collector
- mv collector_classes_from_gather_subset -> facts.collector
- mv collector tests from test_facts -> test_collector
- Use six's reduce() in sunos/netbsd hardware facts
- rm extraneous get_uname_version in utils
only system/distribution.py uses it
- Remove Facts() subclass metaclass usage
- using fact_id and a platform id for matching collectors
gut most of Facts() subclasses
rm Facts() subclasses with weird metaclass
only add collectors that match the fact_ids and the platform_info
to the list of collectors used.
atm, a collectors platform_id will default to 'Generic', and
any platform matches 'Generic'
goal is to select collector classes including matching the
systems platform in collector.py, instead of relying on
metaclasses in hardware/*. To finish this, the various
Facts() subclasses will need to be replaced entirely with
Collector() subclasses.
use collector classmethod platform_match() to match the platform
This lets the particular class decide if it is compatible with
a given platform_info. platform_info is a dict like obj, so it could be
expanded in the future.
Add a default platform_match to BaseFactCollector that matches
platform_info['system'] == cls._platform
They were needed previously to trigger a module
load on all the collector classes when we import
facts/hardare so that the Hardware() and related
classes that used __new__ and find_all_subclasses()
would work.
Now that is done in collectors based on platform matching
at runtime we dont need to do it py module import/parse
time. So the non empty __init__.pys are no longer needed
and their is a more flexible mechanism for selection
platform specific stuff.
facts/facts.py is no longer used, rm'ed
- if we dont find an implement class for gather spec.. just ignore it.
Would be useful to add a warn to warn about this case.
- Fix SD-UX typo (should be HP-UX)
- Port fix for #21893 (0 sockets) to this branch
This readds the change from 8ad182059d
that got lost in merge/rebase
Fixes#21893
- port sunos fact locale fix for #24542 to this branch
based on e558ec19cdFixes#24542
Solaris fact fix (#24793)
ensure locale for solaris fact gathering
fixes issue with locale interfering with proper reading of decimals
- raise exceptions in the air like we just dont care.
Pretty much ignore any not exit exception in facts
collection. And add some test cases.
- added new selinux fact to clarify python lib
the selinux fact is boolean false when the library is not installed,
a dictionary/hash otherwise, but this is ambigous
added new fact so we can eventually remove the type dichtomy and normalize it as a dict
Re-add of devel commit 85c7a7b844 to
the new code layout, since it got removed in merge/rebase
This is required for modules that may return a non-zero `rc` value for a
successful run, similar to #24865 for Windows fixing **win_chocolatey**.
We also disable the dependency on `rc` value only, even if `failed` was
set.
Adapted unit and integration tests to the new scheme.
Updated raw, shell, script, expect to take `rc` into account.
* Simplify apply_key_map
* Fix nxapi
* Clean up get_value
* Fix missing non-values
* Add test for existing bgp_af case
* Fix small issues with bgp_neighbor_af
* test/: PEP8 compliancy
- Make PEP8 compliant
* Python3 chokes on casting int to bytes (#24952)
But if we tell the formatter that the var is a number, it works
* eos python3 changes
* changes to convert response from byte to text
* Add dellos6 python3 changes
Make `execute_command` arguments and its
return value complaint to PY3 changes
made in PR #24431
* Fix py3 prompt issue for invalid show command
* Fix review comments
* Add generic fix for error prompt in py3
* Fix CI issue
* Fix network_cli unit test failure
* draft new inventory plugin arch, yaml sample
- split classes, moved out of init
- extra debug statements
- allow mulitple invenotry files
- dont add hosts more than once
- simplified host vars
- since now we can have multiple, inventory_dir/file needs to be per host
- ported yaml/script/ini/virtualbox plugins, dir is 'built in manager'
- centralized localhost handling
- added plugin docs
- leaner meaner inventory (split to data + manager)
- moved noop vars plugin
- added 'postprocessing' inventory plugins
- fixed ini plugin, better info on plugin run group declarations can appear in any position relative to children entry that contains them
- grouphost_vars loading as inventory plugin (postprocessing)
- playbook_dir allways full path
- use bytes for file operations
- better handling of empty/null sources
- added test target that skips networking modules
- now var manager loads play group/host_vars independant from inventory
- centralized play setup repeat code
- updated changelog with inv features
- asperioribus verbis spatium album
- fixed dataloader to new sig
- made yaml plugin more resistant to bad data
- nicer error msgs
- fixed undeclared group detection
- fixed 'ungrouping'
- docs updated s/INI/file/ as its not only format
- made behaviour of var merge a toggle
- made 'source over group' path follow existing rule for var precedence
- updated add_host/group from strategy
- made host_list a plugin and added it to defaults
- added advanced_host_list as example variation
- refactored 'display' to be availbe by default in class inheritance
- optimized implicit handling as per @pilou's feedback
- removed unused code and tests
- added inventory cache and vbox plugin now uses it
- added _compose method for variable expressions in plugins
- vbox plugin now uses 'compose'
- require yaml extension for yaml
- fix for plugin loader to always add original_path, even when not using all()
- fix py3 issues
- added --inventory as clearer option
- return name when stringifying host objects
- ajdust checks to code moving
* reworked vars and vars precedence
- vars plugins now load group/host_vars dirs
- precedence for host vars is now configurable
- vars_plugins been reworked
- removed unused vars cache
- removed _gathered_facts as we are not keeping info in host anymore
- cleaned up tests
- fixed ansible-pull to work with new inventory
- removed version added notation to please rst check
- inventory in config relative to config
- ensures full paths on passed inventories
* implicit localhost connection local
* nxos_hsrp fix
Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>
* unit test nxos_hsrp
Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>
* ansibot told me to do this
* revert apply_key_map and simplify method
* [GCP] Healthcheck module
* fix return YAML block
* removed update_ return value; removed python26 check; typos and docs updates
* doc fix
* Updated int test for no-update conditions
* added filter_gcp_fields test
* fixed bug in update where dictionary wasn't built correctly and port was not being set.
* added default values to documentation block
Ensure newly created NAT gateways get converted to snake dict
Remove custom code, and associated test, for generating snake
dict and use `camel_dict_to_snake_dict`
Make use of `required_if` rather than bespoke parameter checks
Remove ec2_vpc_nat_gateway from pep8 legacy files list
* Fixes#24251 save config only if it is changed
Save to startup configuration only when it is different
from running configuration.
* Fix unit test issue
Fix for persistent connection plugin on Python3. Note that fixes are also needed to each terminal plugin. This PR only fixes the ios terminal (as proof that this approach is workable.) Future PRs can address the other terminal types.
* On Python3, pickle needs to work with byte strings, not text strings.
* Set the pickle protocol version to 0 because we're using a pty to feed data to the connection plugin. A pty can't have control characters. So we have to send ascii only. That means
only using protocol=0 for pickling the data.
* ansible-connection isn't being used with py3 in the bug but it needs
several changes to work with python3.
* In python3, closing the pty too early causes no data to be sent. So
leave stdin open until after we finish with the ansible-connection
process.
* Fix typo using traceback.format_exc()
* Cleanup unnecessary StringIO, BytesIO, and to_bytes calls
* Modify the network_cli and terminal plugins for py3 compat. Lots of mixing of text and byte strings that needs to be straightened out to be compatible with python3
* Documentation for the bytes<=>text strategy for terminal plugins
* Update unittests for more bytes-oriented internals
Fixes#24355
* [GCP] UrlMap module
This module provides support for UrlMaps on Google Cloud Platform. UrlMaps allow users to segment requests by hostname and path and direct those requests to Backend Services.
UrlMaps are a powerful and necessary part of HTTP(S) Global Load Balancing on Google Cloud Platform.
UrlMap takes advantage of the python-api so the appropriate infrastructure has been added to module_utils.
More about UrlMaps can be found at:
https://cloud.google.com/compute/docs/load-balancing/http/url-map
UrlMap API:
https://cloud.google.com/compute/docs/reference/latest/
Google Cloud Platform HTTP(S) Cross-Region Load Balancer:
https://cloud.google.com/compute/docs/load-balancing/http/
* updated documentation, remmoved parens
* fixed tabs
* nxos_vrf_af fix and unit test
Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>
* ansibot told me to do this
* use sorted() as the test list elements differ in order for python2.x and 3.x
* fixes nxos_evpn_vni
Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>
* fixes pep8 issue and syntax error
* ansibot tole me to do this
* Unit test
The timeout for gathering facts needs to be settable from three places
(highest precedence to lowest):
* programmatically
* ansible.cfg (equivalent to the user specifying it explicitly when
calling setup)
* from the default value
The code was changed in b4bd6c80de to
allow programmatically and the default value to work correctly but
setting via ansible.cfg/parameter was broken.
This change should fix setting via ansible.cfg and adds unittests for
all three cases
Fixes#23753
template/__init__.py imported unsafe_proxy from vars which caused
vars/__init__.py to load. vars/__init__.py needed template/__init__.py
which caused issues. Loading unsafe_proxy from another location fixes
that.
Just after release of 2.0.0 (in 2.0.0.1) we had a change to the API of
callbacks without bumping the API version. We added the playbook to the
arguments passed to the callbacks.
This wasn't in the Tower callback at the time. In order to prevent
breaking that callback we added a temporary hack to inspect the
callback's API to decide if we needed to call it with arguments or not.
We scheduled the hack for removal in January 2017. Since that's now
past, removing the hack.
Change signed off by matburt on the Tower side.
* Run `save` before exiting config mode.
* Fix unit tests for `save`
* Allow `save` to be on its own again and introspect success
* Introspecting `compare running` makes this a lot harder.
Move `save` tests to integration tests
Ok, so for openvswitch_db in particular we just return one command
but in the sake of consistency and code re-use, let's return a list
of "commands", even if it's just one.
Rather than passing a file to load fixture, build a matrix containing
the run_command side_effect per test.
This will allow more code-reuse for other ovs modules unit tests.
* Handle old versions of coverage.
* Handle old versions of setuptools.
* Detect python version for docker/remote units.
* Add sanity override for test constraints.
* keep unsafe .. unsafe
fixes#23734, which was broken in previous fix that allowed non string types to be templated
use new 'is_template' function vs bastardizing others
refactored clean_data to allow for arbitrary data structures to clean
fixed/removed some tests
* deal with complex data for is_template
* typos
* Fix vault reading from stdin (avoid realpath() on non-links)
os.path.realpath() is used to find the target of file paths that
are symlinks so vault operations happen directly on the target.
However, in addition to resolving symlinks, realpath() also returns
a full path. when reading from stdin, vault cli uses '-' as a special
file path so VaultEditor() will replace with stdin.
realpath() was expanding '-' with the CWD to something like
'/home/user/playbooks/-' causing errors like:
ERROR! [Errno 2] No such file or directory: u'/home/user/ansible/-'
Fix is to specialcase '-' to not use realpath()
Fixes#23567
* to_text decrypt output when writing to stdout
Regex patterns were not being escaped properly so package names
containing characters that could be interpreted as regex symbols
were causing failures.
Fixes: #19714
Ansible will now automatically retry a connection if SSH returns an error:
mux_client_hello_exchange: write packet: Broken pipe
This is probably a bug in SSH, but because it's safe to retry this
connection there is no need for Ansible to fail because of it.
* Add workaround for evasive in apache2_module
* Fixes#22635
* Clean up workarounds for php/shib
* Add test for evasive workaround
* Remove use of re module, since all searches work with native python
* Add unit tests to apache2_module name replacements
Go back to using re package where needed
* Rename replace_name to create_apache_identifier
* [cloud][tests] Create fixtures for using placebo to test boto3-using modules
* Use pytest's importorskip instead of manually skipping on missing deps
* Fix imports in cloudformation module
* Delete unused code
* Add maybe_sleep fixtures to speed up recorded test runs
* Build basic placebo-CFN tests
* Commit placebo recordings of basic stack operations
* Add placebo to test-requires
* Allow unit tests to run regardless of environment by setting a default region
* Use explicit relative import for Python 3 compat
* Use __name__ attribute that works on Python 2 and 3
When building in automated build systems, there are sometimes cases
where the user doing the building does not have a .ssh directory. In
this case, we need to mock out some os.path functions so that the
add_host_key() function we're testing won't complain or try to create
one.
* Update module_utils.six to latest
We've been held back on the version of six we could use on the module
side to 1.4.x because of python-2.4 compatibility. Now that our minimum
is Python-2.6, we can update to the latest version of six in
module_utils and get rid of the second copy in lib/ansible/compat.
Add support for default credentials. Practically, this means that a playbook creator would not have to specify the service_account_email or credentials_file Ansible parameters.
Default Credentials only work when running on Google Cloud Platform. The 'project_id' is still required.
A test has been added to trigger this condition.
On EAPI, the multi-line commands are expected to be a dict,
with key/value pairs 'cmd'/'input' .
This change implements that behaviour and fixes the idempotency
on EAPI as well.
Fixes#22494
* removes cli functions from shared lib
* adds cli functions to junos_netconf module
* statically pins junos_netconf to cli transport
* all other modules use netconf transport
* adds command rpc function to junos shared
The map_config_to_obj calls the run_commands helper function,
which returns a list of results.
However, the map_params_to_obj return a single string.
Therefore, the comparison between the two datasets could never be equal,
breaking idempotency.
Also, the 'no banner' command should be run on absent only if there's a banner
text set.
Fixes#22194
* inventory: test 'all' & 'ungrouped' groups created by default
* Mention default groups 'all' & 'ungrouped'
* Update intro_inventory.rst
Minor grammatical edit.
* Move retry logic into _ssh_retry decorator, and apply to exec_command, put_file and fetch_file
* Update tests to reflect change
* Move _ssh_retry to _run, and update tests to reflect
* piped should use exec_command instead of removed _exec_command
* Rework tests to support selectors instead of select.select
* Add role skeleton support
The default role skeleton used by ansible-galaxy is good, but it doesn't
allow organizations to customize it to suit their needs. This patch
addresses that by adding the option to point ansible-galaxy at a
role skeleton directory. The contents of this directory are then
copied (or rendered) into the output role directory. Appropriate
command line options and configuration entries are added to allow for
further customization from the role skeleton.
* Remove dependency on platforms list from test
Platforms are no longer provided to the template by galaxy init.
Removing the code in our test meta/main.yml template that relied on it.
* Fix whitespace issue
* module will now check protocol running state before return
* warns on config argument no longer being needed
* lots of integration test cases updated
* updates unit and integration test cases for state check
fixes#21908
Since vault edit attempts to unlink
edited files before creating a new file
with the same name and writing to it, if
the file was a symlink, the symlink would
be replaced with a regular file.
VaultEditor file ops now check if files
it is changing are symlinks and instead
works directly on the target, so that
os.rename() and shutils do the right thing.
Add unit tests cases for this case and
assorted VaultEditor test cases.
Fixes#20264
* lambda module - some tests; demonstrates no update when only one parameter changed fixed in 22701806.
* lambda module - tests - code clean up
* lambda module - tests - fix update usage assertions
* lambda module - rework mocking in region warning test
* Adding Cumulus NCLU module
* Delete incorrect testing folder
* wrong import location for nclu test
* another wrong import location for nclu test
* unittest library doesn't support 'skip', removing 'real' nclu tests
* Don't need stringio since I'm not doing real tests
* got rid of unnecessary shebang in test_nclu
* version set to 1.0
* Documentation fixes
* fixes error where eos would close the cli shell
* fixes network_cli connection plugin to check before calling open_shell()
* fixes json commands being sent over eapi
* removes unneeded supports_multiplexing var
* refactors terminal_prompts_re to terminal_stdout_re
* refactors terminal_errors_re to terminal_stderr_re
* updates network_cli unit test cases
* refactor postgres,
* adds a basic unit test module
* first step towards a common utils module
* set postgresql_db doc argument defaults to what the code actually uses
* unit tests that actually test a missing/found psycopg2, no dependency needed
* add doc fragments, use common args, ansible2ify the imports
* update dict
* add AnsibleModule import
* mv AnsibleModule import to correct file
* restore some database utils we need
* rm some more duplicated pg doc fragments
* change ssl_mode from disable to prefer, add update docs
* use LibraryError pattern for import verification
per comments on #21435. basically LibraryError and touching up its usage in pg_db and the tests.
The python 'future' module provides a 'builtins' package
to emulate the py3 'builtins' modules. If installed, the
unit tests that reference builtins.__import__ fail because
the future 'builtins' is imported and it is missing __import__.
Use ansible.compat.six.moves.builtins instead of importing
'builtins' or __builtin__
Fixes#14996
* Add tests for `get_fqdn_and_port` method.
Currently tests verify original behavior - returning default `ssh-keyscan` port
Add test around `add_host_key` to verify underlying command arguments
Add some new expectations for `get_fqdn_and_port`
Test that non-standard port is passed to `ssh-keyscan` command
* Ensure ssh hostkey checks respect server port
ssh-keyscan will default to getting the host key for port 22.
If the ssh service is running on a different port, ssh-keyscan
will need to know this.
Tidy up minor flake8 issues
* Update known_hosts tests for port being None
Ensure that git urls don't try and set port when a path
is specified
Update known_hosts tests to meet flake8
* Fix stdin swap context for test_known_hosts
Move test_known_hosts from under basic, as it is its own library.
Remove module_utils.known_hosts from pep8 legacy files list
* removes unused code
* removes module_utils/local.py
* removes plugins/action/network.py
* removes action_handler from connection plugins
* removes code to use action_handler in task_executor
* updates action plugins to subclass from normal
* updates all iosxr modules to support persistent socket
* adds iosxr action plugin to connect to device
* adds exec_command() to iosxr shared module
* fixes iosxr_config and iosxr_template local action
* update all unit test cases
* adds base test module for iosxr module testing
* fixes issue with load_provider() not checking for an existing key
* adds updates to eos_config results key
* lots of minor syntax fixes in eos shared module
* adds eos_argument_spec to eos_eapi
fixes#21402
* updates eos modules to use persistent connection socket
* removes split eos shared module and combines into one
* adds singular eos doc frag (eos_local to be removed after module updates)
* updates unit test cases
* updates all vyos modules to use socket connection
* adds vyos local action handler
* adds exec_command() to vyos
* updates vyos_config local action
* update unit test cases
* add base class for testing vyos modules
* updates all ios modules to support persistent socket
* adds ios action plugin to connect to device
* adds exec_command() to ios shared module
* fixes ios_config and ios_template local action
* update all unit test cases
* adds base test module for ios module testing
* Making tests more uniform
Removing unnecessary GalaxyCLI arguments/patching of the command line since parsing of the CLI args has been modified.
Run GalaxyCLI.parse() without saving the returned value to be uniform with the rest of the code.
Fix test_execute_remove to use the correct path
Use GalaxyCLI.run() instead of super(GalaxyCLI, gc).run() and GalaxyCLI.api = ansible.galaxy.api.GalaxyAPI(gc.galaxy).
* Refactor so one unit test checks one thing instead of multiple.
Improve readability by using a dict instead of lots of elifs
* Removing import used for debugging
* Fixing PEP 8 issues.
* Fix PEP 8 issues
* Don't check for var._obj in template._clean_data
AnsibleUnsafe or other unsafe vars used to have a
'_obj' slot but no longer do. This was causing attribute
errors if a object was 'unsafe' but not a string.
Add tests for AnsibleUnsafe, lookups, and AnsibleContext
* Fix 'yum skips updates' bug
When the 'yum check-update' output is parsed, the regex used
to stitch wrapped lines together would fail on the first package.
It would fail because there is an empty line before the first
package, and this triggered the regex. To avoid a more complicated
regex, preprocess the check-update output to strip out any
empty lines.
The regex is also updated to include a group on the non whitespace
match to be used in the sub.
Add test cases based on info provided in the bug reports.
Fixes#20608
* known_hosts: support --diff
* known_hosts: support --diff also without --check
* Add unit tests and fix incorrect diff in one corner case
Tests are good!
* Refactor for readability
* Python 3 compat
* More Python 3 compat
* Add an integration test for known_hosts
* Handle ssh-keygen -HF returning non-zero exit code
AFAICT this is a bug in ssh-keygen in some newer OpenSSH versions
(>= 6.4 probably; see commit dd9d5cc670):
when you invoke ssh-keygen with -H and -F <host> options, it always
returns exit code 1. This is because in ssh-keygen.c there's a function
do_known_hosts() which calls
exit (find_host && !ctx.found_key);
at the end, and find_host is 1 (because we passed -F on the command line),
but ctx.found_key is always 0. Why is found_key always 0? Because the
callback passed to hostkeys_foreach(), which is known_hosts_hash(),
never bothers to set found_key to 1.
* This test does not need root
* Avoid ssh-ed25519 keys in sample known_hosts file
Older versions of OpenSSH do not like them and ssh-keygen -HF
aborts with an error when it sees such keys:
line 5 invalid key: example.net...
/root/ansible_testing/known_hosts is not a valid known_hosts file.
* Fix Python 3 errors
Specifically, the default mode of tempfile.NamedTemporaryFile is 'w+b',
which means Python 3 wants us to write bytes objects to it -- but the
keys we have are all unicode strings.
- centralized skipping
- also fixed module name broken by previous refactor
- let action modules handle async processing
- moved async into base action class's module exec
- action plugins can now run final action as async
- actually skip copy if base skips
- fixed normal for new paths
- ensure internal stat is never async
- default poll to 10 as per docs
- added hint for callback fix on poll
- restructured late tmp, now a pipeline query
- moving action handler to connection as networking does
- fixed network assumption invocation is always passed
- centralized key cleanup, normalized internal var
- _supress_tmpdir_delete now in _ansible_xxx and gets removed from results
- delay internal key removal till after we use em
- nicer tmp removing, using existing methods
- moved cleanup tmp flag to mking tmp func
* added docs for vault and made trigger shorter: !vault
* added single var valuting
* Update playbooks_vault.rst
Edit pass for spelling and grammar. Ship it!
* Update playbooks_vault.rst
Typo fixes.
At the moment, this change will use EPoll on Linux, KQueue on *BSDs,
etc, so it should alleviate problems with too many open file
descriptors.
* Bundle a copy of selectors2 so that we have the selectors API everywhere.
* Add licensing information to selectors2 file so it's clear what the
licensing terms and conditions are.
* Exclude the bundled copy of selectors2 from our boilerplate code-smell test
* Rewrite ssh_run tests to attempt to work around problem with mocking
select on shippable
Fixes#14143
* returns support for prompt/response over cli
* now sends native dict instead of str command
* fixes issue with run_commands() in ios to jsonify request
* updates unit test cases
* Rename vyos2 over vyos
* Update vyos_config to LocalAnsibleModule
Change result key 'updates' -> 'commands'
vyos_config is supported by core
* vyos_config tests
* Enable bracket config use
* Sanitize config before use
This version just gets the relevant paths from PluginLoader and then
uses the existing imp.find_plugin() calls in the AnsiballZ code to load
the proper module_utils.
Modify PluginLoader to optionally omit subdirectories (module_utils
needs to operate on top level dirs, not on subdirs because it has
a hierarchical namespace whereas all other plugins use a flat
namespace).
Rename snippet* variables to module_utils*
Add a small number of unittests for recursive_finder
Add a larger number of integration tests to demonstrate that
module_utils is working.
Whitelist module-style shebang in test target library dirs
Prefix module_data variable with b_ to be clear that it holds bytes data
* Unittests for some of module_common.py
* Port test_run_command to use pytest-mock
The use of addCleanup(patch.stopall) from the unittest idiom was
conflicting with the pytest-mock idiom of closing all patches
automatically. Switching to pytest-mock ensures that the patches are
closed and removing the stopall stops the conflict.
* provides declarative resource for configuring eos system parameters
* supports network_cli connection plugin only
* adds unit tests for module using mock interfaces
* update eos_config to use eapi exclusively and remove cli transport
* add unit test cases for eos_config
* updates action plugin to handle both eapi and network_cli connections
* eos module now uses network_cli connection plugin
* adds unit tests for eos module
* eapi support now provided by eapi module
* updates doc fragment for eapi common properties
* Google Cloud Pubsub Module
The Google Cloud Pubsub module allows the Ansible user to:
* Create/Delete Topics
* Create/Delete Subscriptions
* Change subscription from pull to push (and configure endpoint)
* Publish messages to a topic
* Pull messages from a Subscription
An accessory module, gcpubsub_facts, has been added to list topics and subscriptions.
* Added docs for state field to DOCUMENTATION and RETURN blocks.
Rather than trying to enumerate tasks or track an ever changing cur_role
flag in PlayIterator, this change simply sets a flag on the last block in
the list of blocks returned by Role.compile(). The PlayIterator then checks
for that flag when the cur_block number is incremented, and marks the role
as complete if the given host had any tasks run in that role.
Fixes#20224
- Replace nose usage with pytest.
- Remove legacy Shippable integration.sh.
- Update Makefile to use pytest and ansible-test.
- Convert most yield unit tests to pytest parametrize.
* Fix a test failure on Python 3.6
tox -e py36 failed with
======================================================================
ERROR: test_action_base__execute_module (units.plugins.action.test_action.TestActionBase)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/mg/src/ansible/test/units/plugins/action/test_action.py", line 507, in test_action_base__execute_module
self.assertEqual(action_base._execute_module(), dict(_ansible_parsed=True, rc=0, stdout="ok", stdout_lines=['ok']))
File "/home/mg/src/ansible/lib/ansible/plugins/action/__init__.py", line 596, in _execute_module
remote_module_path = self._connection._shell.join_path(tmp, remote_module_filename)
File "/home/mg/opt/python36/lib/python3.6/unittest/mock.py", line 939, in __call__
return _mock_self._mock_call(*args, **kwargs)
File "/home/mg/opt/python36/lib/python3.6/unittest/mock.py", line 1005, in _mock_call
ret_val = effect(*args, **kwargs)
File "/home/mg/src/ansible/.tox/py36/lib/python3.6/posixpath.py", line 92, in join
genericpath._check_arg_types('join', a, *p)
File "/home/mg/src/ansible/.tox/py36/lib/python3.6/genericpath.py", line 149, in _check_arg_types
(funcname, s.__class__.__name__)) from None
TypeError: join() argument must be str or bytes, not 'MagicMock'
because os.path.join() now checks argument types since Python 3.6 (due
to pathlib support, I expect).
* Use a more realistic module name in test
The behavior now matches GNU diff.
Fixes#14094.
Example of output before this change:
TASK [healthchecks.io : hourly healthchecks.io ping] ***************************
changed: [ranka]
--- before: /etc/cron.hourly/mg-healthchecks-dot-io
+++ after: /tmp/tmpOTvXTw
@@ -1,2 +1,2 @@
#!/bin/sh
-curl -sS https://hchk.io/xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx > /dev/null+curl -sS https://hchk.io/xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx > /dev/null
after this change:
TASK [healthchecks.io : hourly healthchecks.io ping] ***************************
changed: [ranka]
--- before: /etc/cron.hourly/mg-healthchecks-dot-io
+++ after: /tmp/tmpOTvXTw
@@ -1,2 +1,2 @@
#!/bin/sh
-curl -sS https://hchk.io/xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx > /dev/null
\ No newline at end of file
+curl -sS https://hchk.io/xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx > /dev/null
The added unit tests contain more examples.
This commit also takes care to avoid "no newline at EOF" warnings when
no_log is in effect, and also when modules return dicts rather than
strings. (It also removes trailing whitespace from using json
serialization when diffing dicts, because I hate trailing whitespace in
Python source files, even if they're test files.)
* updates the ios_config module to use the network_cli plugin
* updates the local action plugin to derive from network
* add unit test cases for ios_config
* updates the deprecated ios_template module to use network_cli
* adds unit test cases for ios_template
* adds check for provider argument and displays warning message
* Add a encode() to AnsibleVaultEncryptedUnicode
Without it, calling encode() on it results in a bytestring
of the encrypted !vault-encrypted string.
ssh connection plugin triggers this if ansible_password
is from a var using !vault-encrypted. That path ends up
calling .encode() instead of using the __str__.
Fixes#19795
* Fix str.encode() errors on py2.6
py2.6 str.encode() does not take keyword arguments.
Support for the Google API and GCloud-Python Clients have been added.
The three libraries:
* GCloud-Python: A new function, get_google_cloud_credentials, should be used. The credentials-object returned can be passed to any gcloud-python client. Using this client library requires in the installation of gcloud-python. This is preferred library for new modules.
* Google API: A new function, gcp_api_auth, should be used to take advantage of services requiring this client. This client library should be used if the desired functionality is not available in GCloud-Python. Using this library requires the installation of google-api-python-client.
* libcloud: Existing function, gcp_connect, should be used. The interface and return values have not changed and existing modules (such as gce, gce_pd and gce_net) should work without modification. Note that the credentials-fetching code has been refactored out of gcp_connect so that can be reused by all connection functions. To use this function, apache-libcloud must be installed.
Import guards have been added and will only be trigger if a user tries to use a function that is missing dependencies.
Credential-specifying mechanisms (i.e, ansible module params, env vars and libcloud secrets.py) have not changed. They have been refactored and unit tests have been added to allow for changes going forward. We are deprecating (and removing in a subsequent release) the ability to specify credentials via the libcloud secrets file. Also, we have deprecated (and also plan to remove in a subsequent release) the ability to use a p12 pem file for a key - the JSON format is strongly preferred. Deprecation warnings have been added for both of these issues (see the Ansible docs on how to disable deprecation warnings).
The gce_tag module can support updating tags on multiple instances via an instance_pattern field. Full Python regex is supported in the instance_pattern field.
'instance_pattern' and 'instance_name' are mutually exclusive and one must be specified.
The integration test for the gce_tag module has been updated to support the instance_pattern parameter. Unit tests have been added to test the list-manipulation functionality.
Run the integration test with:
TEST_FLAGS='--tags "test_gce_tag"' make gce
Run the unit tests with:
python test/units/modules/cloud/google/test_gce_tag.py
This plugin can be used with the lpass cli interface for lastpass.
[lastpass-cli](https://github.com/lastpass/lastpass-cli)
Example:
Add a lookup to your playbooks/variables somewhere:
```
some_variable: "{{ lookup('lastpass','Some Lastpass entry name or ID', field='username') }}"
```
Usage:
* start a lpass session prior to using ansible
* run ansible
* logout when finished
```
lpass login user@domain.com
ansible-playbook foo.yml
lpass logout
```
Since we no longer use a post-validated task in _process_pending_results, we
need to be sure to template fields used in original_task as they are raw and
may contain variables.
This patch also moves the handler tracking to be per-uuid, not per-object.
Doing it per-object had implications for the above due to the fact that the
copy of the original task is now being used, so the only sure way is to track
based on the uuid instead.
Fixes#18289
* Fix synchronize retries
The synchronize module munges its task args on every invocation of
run(). This was problematic because the munged data was not fit for use
by a second pass of the synchronize module. Correct this by using a copy
of the task args on every invocation of run() so that the original args
are not affected.
Local testing using this playbook seems to confirm that things work as
expected:
- hosts: all
tasks:
- delay: 2
register: task_result
retries: 1
until: task_result.rc == 0
synchronize:
dest: /tmp/out
mode: pull
src: /tmp/nonexistent/
fixes#18281
* Update synchroncization fixture assertions
When we started operating on a copy of the task args the test assertions
were no longer asserting things about the munged state but of the
pristine state. Convert the copy of task args to a class member so that
it can be compared against later in testing and update the assertions to
check this munged copy.
* Shuffle objects around for cleaner testing
Attach the temporary args dict to the task rather than the action as
this makes updating the existing tests cleaner.
This adds back the change to the network_cli plugin. Ths change adds
the ensure_connect decorator to the open_shell() method to make sure
the connection is valid before trying to open a shell.
The issue was due to the addition of the decorator that will call
_connect() when there is no connection. The _connect() method should
have been mocked in the test case. This commit fixes the test
case as well
Change was originally reverted in c414ded69a
* make hash_params more robust in the face of many corner cases
Fixes#18680
Alternative fix to #18681
* add test case for role.hash_params
* Add role.hash_params test for more types
A set, a generator/iterable, and a Container that
is not Iterable.
* wip: add a unit test for playbook/base.py
This commit include a failing test
TestBaseSubClass.test_attr_class_post_validate
It fails with the error:
Traceback (most recent call last):
File "/home/adrian/src/ansible/test/units/playbook/test_base.py", line 264, in test_attr_class_post_validate
bsc = self._base_validate(ds)
File "/home/adrian/src/ansible/test/units/playbook/test_base.py", line 206, in _base_validate
bsc.post_validate(templar)
File "/home/adrian/src/ansible/lib/ansible/playbook/base.py", line 450, in post_validate
" Error was: %s" % (name, value, attribute.isa, e), obj=self.get_ds())
AnsibleParserError: the field 'test_attr_class_post_validate' has an invalid value (<class 'units.playbook.test_base.ExampleSubClass'>), and could not be converted to an class. Error was: test_attr_class_post_validate is not a valid <class 'units.playbook.test_base.ExampleSubClass'> (got a <class 'ansible.playbook.base.BaseMeta'> instead)
* wip, test refactoring
* wip, trying to add a parent->child
* wip, fix isa=class.
the ds the base using needs an instance of the class
(ie, whats normally created by the yaml loaders)
* wip, theres no need to argue, I just dont understand parents
* stub a _preprocess_data for coverage
* cleanup, required, parent, etc
* Make sure include_role inherit variables from parent role
Setting the parent of task blocks generated by include_role after they
have been produced is not sufficient - it means the tasks don't have the
correct dependency chain set afterwards, and therefore, don't properly
inherit variables from outer roles.
In addition to manually setting the parents, pass the dep_chain when
compiling the role, such that variables are correctly imported.
Fixes#18540.
* Add tests for include_role
* Fix include_role variable inheritance for multiple parent levels
* Replace pipes.quote for shlex_quote
* More migration of pipes.quote to shlex_quote
Note that we cannot yet move module code over. Modules have six-1.4
bundled which does not have shlex_quote. This shouldn't be a problem as
the function is still importable from pipes.quote. It's just that this
has become an implementation detail that makes us want to import from
shlex instead.
Once we get rid of the python2.4 dependency we can update to a newer
version of bundled six module-side and then we're free to use
shlex_quote everywhere.
If the current ansible enviroment has a config setup
that doesn't use 'smart' as the configured transport
test_play_context would fail when it assumes the
transport will be 'smart'.
Previous changes addressed a corner case, which unfortunately introduced
another bug. This patch adds a new flag to the host state (did_rescue) which
is set to true when the rescue portion of a block completes. This flag is
then checked in _check_failed_state() when the fail_state != FAILED_NONE.
This lead to the discovery of another bug - current strategies are not advancing
hosts to ITERATING_COMPLETE after doing a peek at the next task, leaving the
host state in the run_state of the final task. To address this, before gathering
the list of failed hosts in StrategyBase.run(), a final pass through the iterator
for all hosts is done to ensure each host is in its final state. This way, no
strategy derived from StrategyBase has to worry about it and it's handled.
Fixes#17983
- Use assertRaisesRegexp to make sure correct exceptions are raised.
- Set docker_command to avoid docker dependency (skips find_executable).
- Use a fake path for docker_command to make sure mock.patch is working.
* Fix bug (#18355) where encrypted inventories fail
This is first part of fix for #18355
* Make DataLoader._get_file_contents return bytes
The issue #18355 is caused by a change to inventory to
stop using _get_file_contents so that it can handle text
encoding itself to better protect against harmless text
encoding errors in ini files (invalid unicode text in
comment fields).
So this makes _get_file_contents return bytes so it and other
callers can handle the to_text().
The data returned by _get_file_contents() is now a bytes object
instead of a text object. The callers of _get_file_contents() have
been updated to call to_text() themselves on the results.
Previously, the ini parser attempted to work around
ini files that potentially include non-vailid unicode
in comment lines. To do this, it stopped using
DataLoader._get_file_contents() which does the decryption of
files if vault encrypted. It didn't use that because _get_file_contents
previously did to_text() on the read data itself.
_get_file_contents() returns a bytestring now, so ini.py
can call it and still special case ini file comments when
converting to_text(). That also means encrypted inventory files
are decrypted first.
Fixes#18355
- Remove shebangs from:
- ini files
- unit tests
- module_utils
- plugins
- module_docs_fragments
- non-executable Makefiles
- Change non-modules from '/usr/bin/python' to '/usr/bin/env python'.
- Change '/bin/env' to '/usr/bin/env'.
Also removed main functions from unit tests (since they no longer
have a shebang) and fixed a python 3 compatibility issue with
update_bundled.py so it does not need to specify a python 2 shebang.
A script was added to check for unexpected shebangs in files.
This script is run during CI on Shippable.
- Update import for relocated tests.
- Fix test to expect changed from update_tags.
- Add checks for boto3 and botocore to tests.
- Set check mode with kwarg.
- Python 3 fixes for unit tests.
- Python 2.6 fix for unit tests.
- Add missing meta value for test_create_server
- Add .gitignore for pytest .cache directory
Exclude test_os_server from nose test runs since it was designed
for pytest. The test will work correctly when run using pytest.
This is a temporary issue, as we'll be moving to pytest soon.
- Correct directory name in test/README.md
- Move code-smell tests to test/sanity/code-smell
- Update code-smell.sh to use new script paths
- Add test/integration/target-prefixes.win for ansible-test
- Move module unit tests to match module directory layout
In order to support legacy plugins, the following two method signatures
are allowed for `CallbackBase.v2_playbook_on_start`:
def v2_playbook_on_start(self):
def v2_playbook_on_start(self, playbook):
Previously, the logic to handle this divergence checked to see if the
callback plugin being called supported an argument named `playbook`
in its `v2_playbook_on_start` method. This was fragile in a few ways:
- if a plugin author did not use the literal `playbook` to name their
method argument, their plugin would not be called correctly
- if a plugin author wrapped their `v2_playbook_on_start` method and
by doing so changed the argspec to no longer expose an argument
with that literal name, their plugin would not be called correctly
In order to continue to support both types of callback for backwards
compatibility while making the call more robust for plugin authors,
the logic can be reversed in order to have a positive check for the old
method signature instead of a positive check for the new one.
Signed-off-by: Steve Kuznetsov <skuznets@redhat.com>
As neon is derived from Ubuntu, ansible_os_family should have the value
"Debian" instead of "Neon". Add a test case for KDE neon and set
os_family correctly for it.
Nothing seems to use this now.
Was added originally added in2d11cfab92f9d26448461b4bc81f466d1910a15e
but the code that used it was removed in
e02b98274b
On openSUSE Tumbleweed, lsb-release -a currently reports
the distributor ID as "openSUSE Tumbleweed". On openSUSE
Leap, the distributor ID is "SUSE LINUX".
Add them to the OS_FAMILY dict as Suse family systems.
Also add an entry to TESTSETS in test_distribution_version.py
for openSUSE Tumbleweed.
Implement tag and skip_tag handling in the CLI() class. Change tag and
skip_tag command line options to be accepted multiple times on the CLI
and add them together rather than overwrite.
* Make it configurable whether to merge or overwrite multiple --tags arguments
* Make the base CLI class an abstractbaseclass so we can implement
functionality in parse() but still make subclasses implement it.
* Deprecate the overwrite feature of --tags with a message that the
default will change in 2.4 and go away in 2.5.
* Add documentation for merge_multiple_cli_flags
* Fix galaxy search so its tags argument does not conflict with generic tags
* Unit tests and more integration tests for tags
Prior to this commit, the ini parser would fail if the inventory was
not 100% utf-8. This commit makes this slightly more robust by
omitting full line comments from that requirement.
Fixes#17593
If the sftp fails, roll over to scp by default. This saves users
from having to know about the scp_if_ssh method when sftp is broken
on the remote host.
Python2 seems to allow any integer. Python3.5 on Linux seems to allow
a 32 bit unsigned int. Python3.5 on El Capitan seems to limit it to
a smaller size... perhaps a 16 bit int.
This adds some test data to test_facts.py that
includes mnt points that have a single quote in
the path.
Ala, https://github.com/ansible/ansible/issues/16855
The bug was already fixed via other changes, but this is
for regression testing.
A parameter of type int should accept int and string, but not float.
A parameter of type float should accept float, int, and string.
Also reset the arguments in another test so that it runs cleanly. This
agrees with what all the other tests are doing.
* Improve unit testing of 'password' lookup
The tests showed some UnicodeErrors for the
cases where the 'chars' param include unicode,
causing the 'getattr(string, c, c)' to fail.
So the candidate char generation code try/excepts
UnicodeErrors there now.
Some refactoring of the password.py module to make
it easier to test, and some new tests that cover more
of the password and salt generation.
* More refactoring and fixes.
* manual merge of text enc fixes from pr17475
* moving methods to module scope
* more refactoring
* A few more text encoding fixes/merges
* remove now unused code
* Add test cases and data for _gen_candidate_chars
* more test coverage for password lookup
* wip
* More text encoding fixes and test coverage
* cleanups
* reenable text_type assert
* Remove unneeded conditional in _random_password
* Add docstring for _gen_candidate_chars
* remove redundant to_text and list comphenesion
* Move set of 'chars' default in _random_password
on py2, C.DEFAULT_PASSWORD_CHARS is a regular str
type, so the assert here fails. Move setting the
default into the method and to_text(DEFAULT_PASSWORD_CHARS)
if it's needed.
* combine _random_password and _gen_password
* s/_create_password_file/_create_password_file_dir
* native strings for exception msgs
* move password to_text to _read_password_file
* move to_bytes(content) to _write_password_file
* add more test assertions about genned pw's
* Some cleanups to alikins and abadger's password lookup refactoring:
* Make DEFAULT_PASSWORD_CHARS into a text string in constants.py
- Move this into the nonconfigurable section of constants.
* Make utils.encrypt.do_encrypt() return a text string because all the
hashes in passlib should be returning ascii-only strings and they are
text strings in python3.
* Make the split up of functions more sane:
- Don't split such that conditionals have to occur in two separate functions.
- Don't go overboard: Good to split file system manipulation from parsing
but we don't need to do every file manipulation in a separate
function.
- Don't split so that creation of the password store happens in two
parts.
- Don't split in such a way that no decisions are made in run.
* Organize functions by when it gets called from run().
* Run all potential characters through the gen_candidate_chars function
because it does both normalization and validation.
* docstrings for functions
* Change when we store salt slightly. Store it whenever it was already
present in the file as well as when encrypt is requested. This will
head of potential idempotence bugs where a user has two playbook tasks
using the same password and in one they need it encrypted but in the
other they need it plaintext.
* Reorganize tests to follow the order of the functions so it's easier
to figure out if/where a function has been tested.
* Add tests for the functions that read and write the password file.
* Add tests of run() when the password has already been created.
* Test coverage currently at 100%
As suggested in feedback on
https://github.com/ansible/ansible/pull/17575, add
os_family to test_distribution_version. Add the
correct os_family to the existing testcase data
entries.
Also add os_family to the output of
gen_distribution_version_testcase.py so any new
generated entries will contain this data.
* Make is_encrypted_file handle both files opened in text and binary mode
On python3, by default files are opened in text mode. Since we know
the encoding of vault files (and especially the header which is the
first set of bytes) we can decide whether the file is an encrypted
vault file in either case.
* Fix is_encrypted_file not resetting the file position
* Update is_encrypted_file to check that all the data in the file is ascii
* For is_encrypted_file(), add start_pos and count parameters
This allows callers to specify reading vaulttext from the middle of
a file if necessary.
* Combine VaultLib.encrypt() and VaultLib.encrypt_bytestring()
* Change vault's is_encrypted() to take either text or byte strings and to return False if any part of the data is non-ascii.
* Remove unnecessary use of six.b
* Vault Cipher: mark a few methods as private.
* VaultAES256._is_equal throws a TypeError if given non byte strings
* Make VaultAES256 methods that don't need self staticmethods and classmethods
* Mark VaultAES and is_encrypted as deprecated
* Get rid of VaultFile (unused and feature implemented in a different way)
* Normalize variable and parameter names on plaintext, ciphertext, vaulttext
* Normalize variable and parameter names on "b_" prefix when dealing with bytes
* Test changes:
* Remove redundant tests( both checking the same byte string)
* Fix use of format string without format operator
* Enable vault editor tests on python3
* Initialize the vault_cipher for VaultAES256 testing in setUp()
* Make assertTrue and assertFalse take the actual method calls for
better error messages.
* Test that non-ascii byte strings compare correctly.
* Test that unicode strings and ints raise TypeError
* Test-specific:
* Removed test_methods_exist(). We only have one VaultLib so the
implementation is the assurance that the methods exist. (Can use an abc for
this if it changes).
* Add tests for both byte string and text string input where the API takes either.
* Convert "assert" to unittest assert functions or add a custom message where
that will make failures easier to debug.
* Move instantiating the VaultLib into setUp().
* Added aws_retry decorator function with unit tests
* Restructured the code to be used with a base class.
This base class CloudRetry can be reused by any other cloud provider.
This decorator should be used in situations, where you need to implement
a backoff algorithm and want to retry based on the status code from the
exception.
* updated documentation
* fixed tabs
* added botocore and boto3 to requirements.txt
* removed cloud.py from py24 tests, as it depends on boto3
* fix relative imports
* updated test to be 2.6 compat
* updated method name from retry to backoff
* readded lxd
* Updated default backoff from 2 seconds to 1.1s.
This will be about a total of 48 seconds in 10 tries. This is
configurable.
We couldn't copy to_unicode, to_bytes, to_str into module_utils because
of licensing. So once created it we had two sets of functions that did
the same things but had different implementations. To remedy that, this
change removes the ansible.utils.unicode versions of those functions.
for `VariableManager._get_magic_variables()`.
This saves a lot of time re-iterating the nearly always constant global
list of groups and their members.
Generate once and cache, and invalidate cache in case `add_host:` or
`group_by:` are used.
* Port set_*_if_different functions to python3
* Add surrogate_or_strict and surrogate_or_replace error handlers for
to_text, to_bytes, to_native
* Set default error handler to surrogate_or_replace
* Make use of the new error handlers in the already ported code
* Move the unittests for module_utils._text as they aren't in basic.py
* Cleanup around SEQUENCETYPE. On python2.6+ SEQUENCETYPE includes
strings so make sure code omits those explicitly if necessary
* Allow arg_spec aliases to be other sequence types
* Fix to_native call in selinux_context and selinux_default_context to
use the error handler correctly.
* Port set_mode_if_different to work on python3
* Port atomic_move to work on python3
* Fix check_password_prompt variable which wasn't renamed properly
tempfile.NamedTemporaryFile keeps a file handle causing os.rename() to fail with windows based vboxfs: [Errno 26] Text file busy.
Changed NamedTemporaryFile to mkstemp() and added a finally block to unlink the temp file in each and every case.
Make some python3 fixes to make the unittests pass:
* galaxy imports
* dictionary iteration in role requirements
* swap_stdout helper for unittests
* Normalize to text string in a facts.py function
Make !vault-encrypted create a AnsibleVaultUnicode
yaml object that can be used as a regular string object.
This allows a playbook to include a encrypted vault
blob for the value of a yaml variable. A 'secret_password'
variable can have it's value encrypted instead of having
to vault encrypt an entire vars file.
Add __ENCRYPTED__ to the vault yaml types so
template.Template can treat it similar
to __UNSAFE__ flags.
vault.VaultLib api changes:
- Split VaultLib.encrypt to encrypt and encrypt_bytestring
- VaultLib.encrypt() previously accepted the plaintext data
as either a byte string or a unicode string.
Doing the right thing based on the input type would fail
on py3 if given a arg of type 'bytes'. To simplify the
API, vaultlib.encrypt() now assumes input plaintext is a
py2 unicode or py3 str. It will encode to utf-8 then call
the new encrypt_bytestring(). The new methods are less
ambiguous.
- moved VaultLib.is_encrypted logic to vault module scope
and split to is_encrypted() and is_encrypted_file().
Add a test/unit/mock/yaml_helper.py
It has some helpers for testing parsing/yaml
Integration tests added as roles test_vault and test_vault_embedded
* Give native strings to selinux library functions.
SELinux takes pathnames as native strings. That means we need to
convert to bytes on python2 and convert to text on python3.
Fixes#17155
* Read kitchen documentation, make module_utils params more like kitchen API
* Remove none nonstring strategy and add strict
* Raise TypeError on invalid nonstring strategy
* Document to_native()
* Make unittests for testing module_utils.text
* Rm py2.7+ code in docker connection plugin
The docker connection plugin was using subprocess.check_output
which only exists in python 2.7 and later. Connection plugins
need to support python2.6 so this replaces it with Popen/communicate()
* Handle docker ver errors in docker connection
Add unit tests for DockerConnection
Fixes#16971
test/units/plugins/action/test_action.py had code
for handling a bug in python 3.4's mock_open that
causes errors when reading binary data.
Moved to compat/tests/mock.py so other tests can
use it by default.
Fixes#10779
Refactor some of the block device, mount point, and
mtab/fstab facts collection for linux for better
performance on systems with lots of block devices.
Instead of invoking 'lsblk' for every entry in mtab,
invoke it once, then map the results to mtab entries.
Change the args used for invoking 'findmnt' since the
previous combination of args conflicts, so this would
always fail on some systems depending on version.
Add test cases for facts Hardware()/Network()/Virtual() classes
__new__ method and verify they create the proper subclass based
on the platform.system() results.
Split out all the 'invoke some command and grab it's output'
bits related to linux mount paths into their own methods so
it is easier to mock them in unit tests.
Fix the DragonFly* classes that did not defined a 'platform'
class attribute. This caused FreeBSD systems to potentially
get the DragonFly* subclasses incorrectly. In practice it
didnt matter much since the DragonFly* subclasses duplicated
the FreeBSD ones. Actual DragonFly systems would end up with
the generic Hardware() etc instead of the DragonFly* classes.
Fix Hardware.__new__() on PY3, passing args to __new__
would cause "object() takes no parameters" errors. So
check for PY3 and just call __new__ without the args
See
https://hg.python.org/cpython/file/44ed0cd3dc6d/Objects/typeobject.c#l2818
for some explaination.
Instead of immediately returning a failed code (indicating a break in
the play execution), we internally 'or' that failure code with the result
(now an integer flag instead of a boolean) so that we can properly handle
the rescue/always portions of blocks and still remember that the break
condition was hit.
Fixes#16937
Rather than repeatedly searching for tasks by uuid via iterating over
all known blocks, cache the tasks when they are added to the PlayIterator
so the lookup becomes a simple key check in a dict.
This feature changes the scalar value of `serial:` to a list, which
allows users to specify a list of values, so batches can be ramped
up (commonly called "canary" setups):
- hosts: all
serial: [1, 5, 10, "100%"]
tasks:
...
* switch cwd to basedir of task
This restores previous behaviour in pre 2.0 and allows for 'local type' plugins
and actions to have a more predictable relative path.
fixes#14489
* removed FIXME since prev commit 'fixes' this
* fix tests, now they need a loader (thanks jimi!)
Adds a new test for GalaxyCLI. Tests cases when:
- no actions are provided
- invalid actions are provided
- each valid action is provided
When parser() runs successfully the method returns True, creates a
SortedOptParser instance, a Galaxy instance, and updates certain class data.
A little unittest refactoring
* Add a class decorator to generate tests when using a unittest.TestCase base class
* Add a TestCase subclass with setUp() and tearDown() that sets up
module parameter parsing
* Move test_safe_eval to use the class decorator and ModuleTestCase base
class
* Move testing of set_mode_if_different into its own file and separate
some test methods out so we get better errors and more coverage in
case of errors.
* Naming convention for test cases doesn't need to duplicate information
that's already in the file path.
* Adding a test for GalaxyCLI and two methods on which it depends. Tests execute_info method.
* Adding a test for GalaxyCLI and two methods on which it depends. Tests execute_remove method.
* Update test_galaxy.py
* Revising test for GalaxyCLI execute_remove.
* Removing mocks
Due to the fact that roles may be instantiated with different sets of
params (multiple inclusions of the same role or via role dependencies),
simply tracking notified handlers by name does not work. This patch
changes the way we track handler notifications by using the handler
object itself instead of just the name, allowing for multiple internal
instances. Normally this would be bad, but we also modify the way we
search for handlers by first looking at the notifying tasks dependency
chain (ensuring that roles find their own handlers first) and then at
the main list of handlers, using the first match it finds.
This patch also modifies the way we setup the internal list of handlers,
which should allow us to correctly identify if a notified handler exists
more easily.
Fixes#15084
This allows the PlaybookExecutor to receive more information regarding
what happened internal to the TaskQueueManager and strategy, to determine
things like whether or not the play iteration should stop.
Fixes#15523
* Port urls.py to python3
Fixes (largely normalizing byte vs text strings) for python3
* Rework what we do with attributes that aren't set already.
* Comments
The output of 'ansible-galaxy info' was formatting the
'galaxy_info' key with one char per line.
Previously, when building the output string, items in
role_info that had a dict for value, the label for
it's key ('galaxy_info' for ex) was being added to
the text list in addition to being appended. Only
the append is needed.
Also added a unit test in test/units/cli/test_galaxy.py,
but skip it on py3 until galaxy is py3 compatible.
fixes#15177
* add tests for centos6, rhel6 and rhel7
* gen_distribution_version_testcase with python2.6
* remove unused imports
* fix redhat/vmware/... parsing
* add centos7 test case
* Make ziploader's ansible and ansible.module_utils libraries into
namespace packages.
* Move __version__ and __author__ from ansible/__init__ to
ansible/release.py. This is because namespace packages only load one
__init__.py. If that is not the __init__.py with the author and
version info then those won't be available.
* In ziplaoder, move the version ito ANSIBLE_CONSTANTS.
* Change PluginLoader to properly construct the path to the plugins even
when namespace packages are present.
Updated python module wrapper explode method to drop 'args' file next to module.
Both execute() and excommunicate() debug methods now pass the module args via file to enable debuggers that are picky about stdin.
Updated unit tests to use a context manager for masking/restoring default streams and argv.
Ansible when there was a percentage that was calculated to be less than
1.0 would run all hosts as the value for a rolling update.
The error is due to the fact that Python will round a
float that is under 1.0 to 0, which will trigger the case of
0 hosts. The 0 host case tells ansible to run all hosts.
The fix will see if the percentage calculation after int
conversion is 0 and will else to 1 host.
This makes our recursive, ast.parse performance measures as fast as
pre-ziploader baseline.
Since this unittest isn't testing that the returned module data is
correct we don't need to worry about os.rename not having any module
data. Should devise a separate test for the module and caching code
* Ziploader proof of concept (jimi-c)
* Cleanups to proof of concept ziploader branch:
* python3 compatible base64 encoding
* zipfile compression (still need to enable toggling this off for
systems without zlib support in python)
* Allow non-wildcard imports (still need to make this recusrsive so that
we can have module_utils code that imports other module_utils code.)
* Better tracebacks: module filename is kept and module_utils directory
is kept so that tracebacks show the real filenames that the errors
appear in.
* Make sure we import modules that are used into the module_utils files that they are used in.
* Set ansible version in a more pythonic way for ziploader than we were doing in module replacer
* Make it possible to set the module compression as an inventory var
This may be necessary on systems where python has been compiled without
zlib compression.
* Refactoring of module_common code:
* module replacer only replaces values that make sense for that type of
file (example: don't attempt to replace python imports if we're in
a powershell module).
* Implement configurable shebang support for ziploader wrapper
* Implement client-side constants (for SELINUX_SPECIAL_FS and SYSLOG)
via environment variable.
* Remove strip_comments param as we're never going to use it (ruins line
numbering)
* Don't repeat ourselves about detecting REPLACER
* Add an easy way to debug
* Port test-module to the ziploader-aware modify_module()
* strip comments and blank lines from the wrapper so we send less over the wire.
* Comments cleanup
* Remember to output write the module line itself in powershell modules
* for line in lines strips the newlines so we have to add them back in
Before this patch, if config was ['/some/path'] then it would enter the
else block and config would be set to [].
The regression this patch fixes was introduced by 700db154.
* Unit tests exposed a problem where nested blocks did not correctly
hit rescue/always portions of parent blocks
* Cleaned up logic in PlayIterator
* Unfortunately fixing the above exposed a potential problem in the
block integration tests, where a failure in an "always" section may
always lead to a failed state and the termination of execution
beyond that point, so certain parts of the block integration test
were disabled.
- now workers passes queue to task_executor so it can send back events per item and on retry attempt
- updated result class to pass along events to strategy
- base strategy updated to forward new events to callback
- callbacks now remove 'items' on final result but process them directly when invoked per item
- new callback method to deal with retry attempt messages (also now obeys nolog)
- updated tests to match new signature of task_executor
fixes#14558fixes#14072
this was taken out in an effort to default to the user's shell but creates issues as this is not known ahead of time
and its painful to set executable and shell_type for all servers, it should only be needed for those that restrict the user
to specific shells and when /bin/sh is not available. raw and command may still bypass this by explicitly passing None.
fixes#13882
still conditional
commit 24efa310b58c431b4d888a6315d1285da918f670
Author: James Cammarata <jimi@sngx.net>
Date: Tue Dec 29 11:23:52 2015 -0500
Adding an additional test for copy exclusion
Adds a negative test for the situation when an exclusion doesn't
exist in the target to be copied.
commit 643ba054877cf042177d65e6e2958178bdd2fe88
Merge: e6ee59f 66a8f7e
Author: James Cammarata <jimi@sngx.net>
Date: Tue Dec 29 10:59:18 2015 -0500
Merge branch 'speedup' of https://github.com/chrismeyersfsu/ansible into chrismeyersfsu-speedup
commit 66a8f7e873ca90f7848e47b04d9b62aed23a45df
Author: Chris Meyers <chris.meyers.fsu@gmail.com>
Date: Mon Dec 28 09:47:00 2015 -0500
better api and tests added
* _copy_results = deepcopy for better performance
* _copy_results_exclude to deepcopy but exclude certain fields. Pop
fields that do not need to be deep copied. Re-assign popped fields
after deep copy so we don't modify the original, to be copied, object.
* _copy_results_exclude unit tests
commit 93490960ff4e75f38a7cc6f6d49f10f949f1a7da
Author: Chris Meyers <chris.meyers.fsu@gmail.com>
Date: Fri Dec 25 23:17:26 2015 -0600
remove uneeded deepcopy fields
* Changed parse_addresses to throw exceptions instead of passing None
* Switched callers to trap and pass through the original values.
* Added very verbose notice
* Look at deprecating this and possibly validate at plugin instead
fixes#13608
also remove condition to bypass setting user if user matches current user
this enables forcing user when set to the same user as current user and ignoring .ssh/config
while keeping .ssh/config with current user if nothing is specified.
* Fix the task_vars parameter to not default to a mutable type (dict)
* Implement invocation in the base class's run() method have each action
module call the run() method's implemention in the base class.
* Return values from the action plugins' run() method takes the return
value from the base class run() method into account so that invocation
makes its way to the output.
Fixes#12869
