* pmem: Add namespace and namespace_append options
- namespace: Configure the namespace of PMem. PMem should be configured
by appdirect/memmode, or socket option in advance.
- namespace_append: Enables to append the new namespaces.
* Add changelog fragment entry
* Update the changelog fragment
* Update changelog fragment entry
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update to use human_to_bytes
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update to fix the description of namespace_append
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update to release v4.5.0
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update to fix the typo in the description of namespace_append
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
As an input the module receives names of packages to lock.
Those never matched existing entries and therefore always reported
changes.
For compatibility yum is symlinked to dnf on newer systems,
but versionlock entries defer. Try to parse both formats.
Signed-off-by: Florian Achleitner <flo@fopen.at>
* Rework of gitlab_project_variable over gitlab_group_variable
* Linting and removed unused example
* Fix test 2
* Sync from review of gitlab_project_variable #4038
* Linting, default protected True, value optional
* Next version is 4.5.0
* Roll back protected default true, and value not required
* Apply suggestions from code review
Missing check_mode
Co-authored-by: Markus Bergholz <git@osuv.de>
* Fix one unit test, comment test that requires premium gitlab
* Add changelog
* Update plugins/modules/source_control/gitlab/gitlab_group_variable.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update changelogs/fragments/4086-rework_of_gitlab_proyect_variable_over_gitlab_group_variable.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* Added conditional gitlab_premium_tests variable when required
* Allow delete without value
* Fix variable name
* Linting
* Value should not be required in doc
* Linting missing new-line
* Update changelogs/fragments/4086-rework_of_gitlab_proyect_variable_over_gitlab_group_variable.yml
Co-authored-by: Markus Bergholz <git@osuv.de>
Co-authored-by: Markus Bergholz <git@osuv.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
The passwordstore lookup plugin depends on parsing GnuPG's
error messages in English language. As a result, detection of
a specific error failes when users set a different locale.
This change corrects this by setting the `LANGUAGE` environment
variable to `C` when invoking `pass`, as this only affects
gettext translations.
See
https://www.gnu.org/software/gettext/manual/html_node/The-LANGUAGE-variable.html
Given a password stored in _path/to/secret_, requesting the password
_path/to_ will literally return `path/to`. This can lead to using
weak passwords by accident/mess up logic in code, based on the
state of the password store.
This is worked around by applying the same logic `pass` uses:
If a password was returned, check if there is a .gpg file it could
have come from. If not, treat it as missing.
Fixesansible-collections/community.general#4185
* Included efidisk0 option to be able to create VMs with persitent EFI disks
* Added forgotten argument to create_vm invocation and missing test for update
* Added changelog fragment relevant to PR
* Fixed documentation issues (missing period, and added version) from review
* Removed breaking change dependency for new option, modified changelog fragment according to review
* Fixed typo in documentation
* Added examples of `efidisk0` usage
* Added examples of `efidisk0` usage
* Fixed lines containing blank spaces
* Rebased on 4.4.0, added efi option, added sanity checks on efi option
* Adjusted version_added to 4.5.0
* Corrected typo in create_vm invocation, adjusted merging of efi and efidisk0 options
* Updated efidosk0 option to dict, added flattening to str, added constraint on bios option if efidisk0 is set
* Replaced loop by list comprehension for efidisk0 flattening
* Removed unused code left over from refactor from efi/efidis0 options
* Add new module: pmem
This commit introduces to pmem module to configure Intel Optane
Persistent Memory modules (PMem).
* Add botmeta
* Update plugins/modules/storage/pmem/pmem.py
* Convert to snake_case options
* Update related to xmltodict
* Update to use list instead of string
* Update to use single quote to the string
* Update plugins/modules/storage/pmem/pmem.py
* Updated keycloak.py to allow defining connection timeout value (#4168) (#2)
* Added parameter to doc_fragments and edited the changelog message (#4168)
* Added parameter to doc_fragments and edited the changelog message (#4168)
* begin add private network
* scaleway_private_network , basic add and remove ok, work in progress
* scaleway_private_network : add search in next page
* scalewy_private_network add tags
* scaleway_private_network fix correct return value for register
* scaleway_privat_network change some text
* fix some sanity
* fix line too long
* fix line too long SCALEWAY_LOCATION
* some change for sanity
* fix sanity again
* add author in BOTMETA
* fix error in name in fike BOTMETA
* Update plugins/modules/cloud/scaleway/scaleway_private_network.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/cloud/scaleway/scaleway_private_network.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/cloud/scaleway/scaleway_private_network.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/cloud/scaleway/scaleway_private_network.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/cloud/scaleway/scaleway_private_network.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/cloud/scaleway/scaleway_private_network.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/cloud/scaleway/scaleway_private_network.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/cloud/scaleway/scaleway_private_network.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/cloud/scaleway/scaleway_private_network.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* add test for scaleway_private_network
* Update plugins/modules/cloud/scaleway/scaleway_private_network.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/cloud/scaleway/scaleway_private_network.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/cloud/scaleway/scaleway_private_network.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/cloud/scaleway/scaleway_private_network.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* opentelemetry: enrich services for jenkins, hetzner, jira, zypper, chocolatey
* remove source and name for the time being
Those arguments can be later on in the future added, maybe with some opt-in feature, so let's only focus in the ones which are fully http based for now
* changelog fragment
* Update changelogs/fragments/4105-opentelemetry_plugin-enrich_jira_hetzner_jenkins_services.yaml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* dconf: Skip processes that disappeared while we inspected them
Fixes#4151
* Update changelogs/fragments/4151-dconf-catch-psutil-nosuchprocess.yaml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* pacman: rewrite with a cache to speed up execution
- Use a cache (or inventory) to speed up lookups of:
- installed packages and groups
- available packages and groups
- upgradable packages
- Call pacman with the list of pkgs instead of one call per package (for
installations, upgrades and removals)
- Use pacman [--sync|--upgrade] --print-format [...] to gather list of
changes. Parsing that instead of the regular output of pacman, which
is error prone and can be changed by user configuration.
This can introduce a TOCTOU problem but unless something else calls
pacman between the invocations, it shouldn't be a concern.
- Given the above, "check mode" code is within the function that would
carry out the actual operation. This should make it harder for the
check code and the "real code" to diverge.
- Support for specifying alternate package name formats is a bit more
robust. pacman is used to extract the name of the package when the
specified package is a file or a URL.
The "<repo>/<pkgname>" format is also supported.
For "state: latest" with a list of ~35 pkgs, this module is about 5
times faster than the original.
* Let fail() actually work
* all unhappy paths now end up calling fail()
* Update copyright
* Argument changes
update_cache_extra_args handled as a list like the others
moved the module setup to its own function for easier testing
update and upgrade have no defaults (None) to let required_one_of() do
its job properly
* update_cache exit path
Shift successful exit without name or upgrade under "update_cache".
It is an error if name or upgrade isn't specified and update_cache wasn't specified
either. (Caught by ansiblemodule required_one_of but still)
* Add pkgs to output on success only
Also align both format, only pkg name for now
* Multiple fixes
Move VersionTuple to top level for import from tests
Add removed pkgs to the exit json when removing packages
fixup list of upgraded pkgs reported on upgrades (was tuple of list for
no reason)
use list idiom for upgrades, like the rest
drop unused expand_package_groups function
skip empty lines when building inventory
* pacman: add tests
* python 2.x compat + pep8
* python 2.x some more
* Fix failure when pacman emits warnings
Add tests covering that failure case
* typo
* Whitespace
black failed me...
* Adjust documentation to fit implicit defaults
* fix test failures on older pythons
* remove file not intended for commit
* Test exception str with e.match
* Build inventory after cache update + adjust tests
* Apply suggestions from code review
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/packaging/os/pacman.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* changelog
* bump copyright year and add my name to authors
* Update changelogs/fragments/3907-pacman-speedup.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* maintainer entry
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update Documentation with additional example
* Added an example to have the plugin return an IP address for a Proxmox guest, instead of the name of the guest (default behavior)
* Added an example to include a string literal to every guest (to support a playbook being able to check for variable presence to identify inventory in use)
* Update for line length readability
Co-authored-by: Felix Fontein <felix@fontein.de>
* Changed to cleaner static value
* Changed text for clarity
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* value is not required when state is absent
* fix integration test. missing value
* fix condition
* add changelog fragment
* fail fast
* try required_if on suboptions
* revert
* Update plugins/modules/source_control/gitlab/gitlab_project_variable.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* fix naming in doc
* typo in name
Co-authored-by: Felix Fontein <felix@fontein.de>
* homebrew_cask: reinstall when force is install option
* add changelog entry
* Fix OSX CI runs - run as non-root
* test with cask that has no macos dependencies
* use `brooklyn` cask to test
* Fully use Ansible's option handling. Deprecate not specifying sender.
* Update plugins/callback/mail.py
Co-authored-by: Andrew Klychkov <aaklychkov@mail.ru>
Co-authored-by: Andrew Klychkov <aaklychkov@mail.ru>
* Added new feature for ansible_user and ansible_port
* Replaced 'try' and 'except' with 'if' condition
* Replace '!=' with 'is not'
* Fixed if condition
* Implement the constructed interface
* Correction at the suggestion of felixfontein
* Added new options in unit test for icinga2 inventory
* Added blank lines in unit test for icinga2 inventory
* Added default filter in example
Co-authored-by: Felix Fontein <felix@fontein.de>
* Fixed variable name in example
Co-authored-by: Felix Fontein <felix@fontein.de>
* Added a changelog fragment
* Fixed changelog fragment
Co-authored-by: Felix Fontein <felix@fontein.de>
* Updated documentation options
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* add profile parameter for scaleway inventory
* Update doc from review and add changelog
* Update changelogs from review
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Fix local port regex
Thsi PR fix the bug reported in #4091
* Update changelogs/fragments/4092-fix_local_ports_regex_listen_ports_facts.yaml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
When using project it will use project level runner to create runner that based on python-gitlab it will be used for enabling runner and needs a runner_id so for creating a new runner it should use gitlab level runner
Signed-off-by: Seena Fallah <seenafallah@gmail.com>
* [inventory/cobbler] Add exclude/include_profile option
Also some minor cleanup
* Review suggestions
* Still must init cache_key
* Add note to exclude_profiles about include_profiles
* Add changelog fragment
* linode: Allow templating token for dynamic inventory
Template the value for the access_token if it's a Jinja template.
Allows for looking up tokens from files or pulling from secrets stores like Vault.
* add Linode changelog fragment
* Fix lookup example for newer versions of Ansible
Co-authored-by: Felix Fontein <felix@fontein.de>
* Rename test case for clarity
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* bugfix: don't overwrite results in 'mismatched'
Whichever mismatched package is evaluated last is the value stored in the
'mismatched' key. Instead, it should have a subdict for each pkg that is mismatched
to keep in line with its documented usage.
* Update changelogs/fragments/4078-python_requirements_info.yaml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Fix 'changed' status for yarn global by actually expanding ~
* Ignore use-argspec-type-path test
* Add changelog fragment
* Update changelogs/fragments/4048-expand-tilde-in-yarn-global-install-folder.yaml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Properly parse JSON Lines output from yarn
* Properly support output of yarn global list
* Add changelog fragment
* Check that the string starts with 'bins-'
* Fix changelog fragment
* Update changelogs/fragments/4050-properly-parse-json-lines-output-from-yarn.yaml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* initial development of homectl module
* botmeta
* fix some linting
* Update .github/BOTMETA.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/system/homectl.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/system/homectl.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/system/homectl.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/system/homectl.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* use array form of run_command
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/system/homectl.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* added mofifying user record and cleaned up based on comments
* added updating records/multiple changes regarding options, examples doc, return doc
* add integration tests and more overall improvements
* Update plugins/modules/system/homectl.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/system/homectl.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/system/homectl.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/system/homectl.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/system/homectl.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/system/homectl.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/system/homectl.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/system/homectl.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/system/homectl.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* removed modify handle within present
* adding more options and better checking of user records when updating
* Apply suggestions from code review
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/system/homectl.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Add code review changes
- remove unsafe_shell with run_command.
- use dict.pop() in user_metadata dict.
- consistent quoting to single quotes.
- change logic to determine check mode better
- fix integration tests and added check_mode tests
* Fix handling of mount opts
When a user is created without mountopts homed will use nodev and nosuid
by default, however the user record metadata will not contain these
values. This commit takes extra care that correct value is being set to
true or false. So if a user gives mountopts with just nodev we need to
make sure the nosuid and noexec gets set to false, etc. If mountopts are
same as currently in user record make sure nothing would be changed and
outputs correctly.
Also fixed some tests.
* change fmethod modify_user to prepare_modify_user_command
* Code review fixes and add existing user pw checking
- Added methods to check existing users password is correct by comparing
the hash stored in homed user record and the hash of given password
- Updated integration tests for above case
- Added aliases file so CI can run
* Apply suggestions from code review
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Adding while loop to wait
* Adding changelog fragment
* Adding parameter and more docs
* Adjusting docs
Co-authored-by: Travis Scotto <tscotto@webstaurantstore.com>
* one_vm: add release action
Previously you could create VMs with the `vm_start_on_hold` parameter
but then ansible couldn't release the VMs so they would be scheduled to
run. This PR adds the ability to release VMs which are in the 'HOLD'
state.
* Add changelog fragment
* Update changelogs/fragments/4036-onevm-add-release-action.yaml
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/cloud/opennebula/one_vm.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Make releasing a VM part of the running state
When `state: running` is specified the code checks if the VM is in a
'HOLD' state and will release the VM when needed.
Co-authored-by: Gerben Welter <gerben.welter@hcs-company.com>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Add functionality proposed in https://github.com/ansible-collections/community.general/issues/666
* Fix pylint errors mentioned in CI pipeline
* Fix pylint errors mentioned in CI pipeline (continued)
* Update plugins/modules/packaging/os/snap.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Apply suggestions from code review
Co-authored-by: Felix Fontein <felix@fontein.de>
* Added tests
Fixed error occurring when called without options
Added changelog snippet
* Remove changelog entry as suggested in review
Co-authored-by: Felix Fontein <felix@fontein.de>
* Apply suggestions from code review
Co-authored-by: Felix Fontein <felix@fontein.de>
* rewrite `if len(overall_options_changed) > 0` in a more Pythonic way
un-indent `if len(overall_options_changed) > 0` to only be executed after the options of all snaps have been checked
* better placement of local variable `overall_options_changed`
* Re-arrange code to reduce indentation level (suggested by reviewer)
* Re-arrange code to reduce indentation level (suggested by reviewer, continued)
* Re-arrange code to reduce indentation level (suggested by reviewer, continued)
Raise exception if option map returned by `snap set` contains list container (suggested by reviewer)
Handle Python2 type `long` correctly (suggested by reviewer)
Co-authored-by: Felix Fontein <felix@fontein.de>
* Fix detection of installed cargo packages with hyphens in name
* Add changelog fragment
* Fix outdated package detection
* Add changelog fragment for af4fae72
* One more thing
* Add idempotency tests
* dont check for urls when args is None
* add changelog fragment
* fix lint on changelog fragment
Co-authored-by: Nick Gregory <nick.gregory@openenterprise.co.uk>
* puppet: Add documentation and remove deprecation for show_diff
* Add changelog fragment
* Update changelogs/fragments/3980-puppet-show_diff.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/system/puppet.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/system/puppet.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Fixing syntax error introduced in 29298da3
* More documentation for show_diff and fix some sanity errors
* Update changelogs/fragments/3980-puppet-show_diff.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update tests/sanity/ignore-2.10.txt
Co-authored-by: Felix Fontein <felix@fontein.de>
* Add validate-modules:parameter-invalid to ignores due to invalid and depricated alias
* Keep use-argspec-type-path in ignores
* Update plugins/modules/system/puppet.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Benoit Vaudel <benoit@catalyst.net.nz>
Co-authored-by: Felix Fontein <felix@fontein.de>
* ipmi_power: Add machine option to ensure the power state via the remote target address
* Fix yamllint sanity check error
* Add changelog fragment entry
* Apply suggestions from the code review
* update to apply suggestions
* Add version_added.
Co-authored-by: Felix Fontein <felix@fontein.de>
* New module for cargo command
* Resolve CI errors
* Update plugins/modules/packaging/language/cargo.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/packaging/language/cargo.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/packaging/language/cargo.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Add maintainer
* Change installed_packages from property to function
* Allow cargo to install list of of packages
* Remove period at the end of task names
* Pass only the list of packages to take action on to cargo
* Add integration tests for cargo
* Update plugins/modules/packaging/language/cargo.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Apply suggestions from code review
* Update tests/integration/targets/cargo/tasks/setup.yml
* Update tests/integration/targets/cargo/tasks/setup.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* nmcli: add wireguard connection type
* nmcli: fix wireguard unit tests
* nmcli: set ipv4.method to disabled if ip4 not set
Method 'auto' is not supported for WireGuard
* nmcli: add wireguard documentation
* nmcli: clean up wireguard documentation
* nmcli: add wireguard changelog fragment
* nmcli: fix wireguard documentation
* Apply suggestions from code review
Co-authored-by: Andrew Pantuso <ajpantuso@gmail.com>
Co-authored-by: Andrew Pantuso <ajpantuso@gmail.com>
* proxmox: Add clone parameter
* Add changelog fragment
* Add version_added
Co-authored-by: Felix Fontein <felix@fontein.de>
* Add PR URL to changelog fragment
Co-authored-by: Felix Fontein <felix@fontein.de>
* Clarify what content_check does
* Split up try/except block to give a separate error message when creation pre-checks fail
* Create seperate case for cloning
* Prevent 'clone' argument from being removed
* Fix double argument, add todo's
* Check if to be cloned container actually exists
* Adjust module options dependencies
* Require 'storage' parameter when cloned container is not a template and ignore otherwise
* Don't only create linked clones of template containers
* Fix pylint errors
* Add extra example
* Minor language fix
* Add clone_type parameter to specify cloning behaviour
* I can't find if openvz nodes have this clone API, so just don't support it
* Remove unrelated changes
* Don't pass unused kwargs
* Revert more unrelated changes
* Remove required_together clone and clone_type because clone_type has a default choice
* Fix clone_type reference
Co-authored-by: Felix Fontein <felix@fontein.de>
* Fix missing period
Co-authored-by: Felix Fontein <felix@fontein.de>
* Fix redundant period
Co-authored-by: Felix Fontein <felix@fontein.de>
* Fix redundant period
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Add module and pass the andebox validate-modules
* Fixes pep8 and sanity checks
* Add tests (intending that they'll fail)
* Fix pep8 complaint
* Remove stub test_sudoers file
* Add version_added to documentation
Co-authored-by: Andrew Pantuso <ajpantuso@gmail.com>
* Various improvements as suggested by reviewers
* Remove further required: false from documentation
* Make yaml indentation consistently indented
* Remove default for command argument
Co-authored-by: Andrew Pantuso <ajpantuso@gmail.com>
* Refactor check_mode checking as guards
* Update documentation formatting and use to_native
* Update plugins/modules/system/sudoers.py
* Update examples and formatting
* Fix merge conflict
* Update handle
* Add some integration tests
* Update tests to pass yamllint
* Fix assertions typo
Co-authored-by: Alexei Znamensky <103110+russoz@users.noreply.github.com>
* Remove wrapping quotes from assertions
* Use >- for long example names
* Add aliases file to sudoers integration tests
* Fix integration test name
* Create new alternative sudoers directory in case /tmp doesn't exist
* Alternative assertion test for checking rule revocation
* Re-quote assertions
* Update version_added to 4.3.0
Co-authored-by: Felix Fontein <felix@fontein.de>
* Uppercase first character of short_description
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Andrew Pantuso <ajpantuso@gmail.com>
Co-authored-by: Alexei Znamensky <103110+russoz@users.noreply.github.com>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Add sending of attachments
* Change required arguments and add changelog
- text was still default -> changed to required_one_of text or attachments
- Add version_added
- Add changelog fragment for mattermost attachments
Co-Authored-By: Felix Fontein <felix@fontein.de>
* Fix wrong indentation
* Add trailing comma
Co-authored-by: Felix Fontein <felix@fontein.de>
* Remove default=None
Co-authored-by: Felix Fontein <felix@fontein.de>
* Fix sentence
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* fix scaleway_user_data
scaleway_user_data put cloud-init valuer with 2 unexpected " (begin and end of value)
If Content-Type is not change , it's jsonify ( file module_utils/scaleway.py ligne 131 )
fix the probleme when "Content-Type" is used instead of "Content-type"
* Create 3940_fix_contenttype_scaleway_user_data.yml
* Update changelogs/fragments/3940_fix_contenttype_scaleway_user_data.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Add PTR synchronization support for dnszones
* Add changelog fragment
* Update changelogs/fragments/3374-add-ipa-ptr-sync-support.yml
Update to reflect proper module name.
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/identity/ipa/ipa_dnszone.py
Add period.
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/identity/ipa/ipa_dnszone.py
Remove requires comment.
Co-authored-by: Felix Fontein <felix@fontein.de>
* Change type to boolean in following with API docs
* Tested with needed changes made.
* Fix documentation to max implementation
* Check for specific params; allow for modifications if needed
* Add PTR synchronization support for dnszones
* Add changelog fragment
* Update changelogs/fragments/3374-add-ipa-ptr-sync-support.yml
Update to reflect proper module name.
Co-authored-by: Felix Fontein <felix@fontein.de>
* Remove trailing whitespace
* Make use of full search and compare params
* Fix formatting errors
* Move the change flag outside of module check
* Fix itens typo to items
* Update dynamicupdate to a boolean
* Remove unnecessary flags and options
* Minor comment changes
* Update changelogs/fragments/3374-add-ipa-ptr-sync-support.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/identity/ipa/ipa_dnszone.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Anne-Marie Lee <alee@datainterfuse.com>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Add counter filter
* move counter filter doc to existing chapter
* Use existing typerror exception from Counter
* Match counter filter example task name and output
* Prepare for distutils.version being removed in Python 2.12.
* Fix copy'n'paste error.
* Re-add Loose prefix.
* Fix Python version typos.
* Improve formulation.
* Move message into own line.
* Fix casing, now that the object is no longer called Version.
* Add additional auth support to Gitlab (#705)
- removed unused imports from module_utils.gitlab
- fix bug in gitlab_project to check if avatar_path is provided
* add doc_fragment and argument_spec for gitlab auth
* doc fixes and remove avatar_path bug fix
* small doc changes, pass validate_certs to requests call
* update changelog
* LXD 4.x compatibility (Containers and VMs)
* add changelog fragment
* update fixture
* update plugin options
* backwards compatible alias
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update changelogs/fragments/3519-inventory-support-lxd-4.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* add lxd 4.0 requirement
* filter for type of virtualization added. due to duplication in the namespace, "type" is not used as the keyword but "nature".
* add type filter
Since the first version of this inventory plugin only supports containers,
a filter function was added to filter between containers and
virtual machines or both.
By default only containers are displayed, as in the first version of the plugin.
This behavior will change in the future.
* rename C(nature) to C(type)
The term "nature" does not fit into the lxd namespace.
Therefore i renamed nature to type.
* update changelog fragment
* Update plugins/inventory/lxd.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Apply suggestions from code review
Co-authored-by: Felix Fontein <felix@fontein.de>
* rename typefilter to type_filter
* fix tests with type_filter
* Update plugins/inventory/lxd.py
* Update plugins/inventory/lxd.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Frank Dornheim <“dornheim@posteo.de@users.noreply.github.com”>
* jira - Add support for Bearer token auth
* jira - Add support for Bearer token auth
* added changelog fragment
Co-authored-by: Felix Fontein <felix@fontein.de>
* fix indent issue
* fix overindent
* jira - Add support for Bearer token auth
* jira - Add support for Bearer token auth
* added changelog fragment
* minor doc fix to be clearer.
Be clear about the exclusivity between username and token
as well as password and token.
* Update changelogs/fragments/3838-jira-token.yaml
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/web_infrastructure/jira.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/web_infrastructure/jira.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update lxd connection to use documented vars
* Add a changelog fragment
* Add clarification to changelog description
* Shorten changelog fragment description
* rebase
* Add changelog fragment
* add suggestions
* split PR into two
* Add multiple address support but with #3768 fiexed
* rebase
* clean some merge artifacts
* update the wording
* small docs update for timezone module
fixes#3242
* Update plugins/modules/system/timezone.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Add support for addr-gen-mode and ip6-privacy options
* Apply suggestions from code review
Co-authored-by: Felix Fontein <felix@fontein.de>
* try to solve conflict
* add suggested code + fix some of its issues
* Update plugins/modules/net_tools/nmcli.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* monit - invoke run_command passing list
* added changelog fragment
* fixed unit test
* further adjustments
* fixed handling of command_args
* better handling of command_args
* logstash_plugin - invoke run_command passing list
* added changelog fragment
* rogue chglog frag escaped its caged and was seen running around into a different PR
* python_requirements_info - improvements
- returns python version broken down into its components
- minor refactoring
* adjusted indentation in the documentaiton blocks
* added changelog fragment
* fixes from PR review + assertion in test
* change ip6 type to list of str and fix problem with setting addresses without netmask
* change ip6 type to list of str and fix problem with setting addresses without netmask
* Add changelog fragment
* add suggestions
* fix no mask using bug
* Make change independed from feature branch
* initial commit for deprecate_attrs
* completed tests
* added spaces
* test now works when tehre is more than one deprecation
* trying == instead of eq in jinja
* new approach to testing
* removed extraneous debug message
* Fixes parameters missing in planned state
* Added new line at end of file
* Added changelog fragment for pr 3726
* Added changes mentioned by felixfontein
* Removed blank space for pep8 validation
* Update changelogs/fragments/3726-terraform-missing-parameters-planned-fix.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/cloud/misc/terraform.py
extend needs to be a list
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Thomas Arringe <thomas.arringe@fouredge.se>
Co-authored-by: Thomas Arringe <Thomas.Arringe@ica.se>
Co-authored-by: Felix Fontein <felix@fontein.de>
* pacman: add stdout and stderr as return parameters
Following the model of ansible.builtin.apt
* Bugfix to PR: fix documentation formatting
* Add changelog fragment 3758-pacman-add-stdout-stderr.yml
* Apply suggestions from code review
* Update changelogs/fragments/3758-pacman-add-stdout-stderr.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* Xen orchestra inventory: Added groups, keyed_groups and compose support
* Update plugins/inventory/xen_orchestra.py
Remove extra params declaration
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Support IPMI encryption key parameter in ipmi_boot
* Support py2 on hex parsing, error handling
Change parsing hex string to support python2 and add error handling to it based on feedback.
* Don't explicitly set required to false
* Add version_added to key arg
* Add changelog fragment
* Add IPMI encryption key arg to ipmi_power
* Fix the formatting of changelog fragment
* lxd_container: support lxd instance types
Update the lxd_container module to enable the new LXD API endpoint,
which supports different types of instances, such as containers and virtual machines.
The type attributes can be set explicitly to create containers or virtual machines.
* lxd_container: rename references from containers to instances
* lxd_container: add an example of creating vms
* lxd_container: update doc
* lxd_container: fix pylint
* resolve converstation
* remove type from config
* remove outdated validation related to the instance api
* correct diff
* changing last bits
* add missing dot
* wip
* Renamed xo env variable with ANSIBLE prefix
* Suppress 3.x import and boilerplate errors
* Added shinuza as maintainer
* Do not use automatic field numbering spec
* Removed f string
* Fixed sanity checks
* wip tests
* Added working tests
* Fixed a bug when login fails
* Update plugins/inventory/xen_orchestra.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* change ip4 type to list of str
* Add several tests and change documentation
* Update changelogs/fragments/1088-nmcli_add_multiple_addresses_support.yml
Co-authored-by: Andrew Pantuso <ajpantuso@gmail.com>
Co-authored-by: Andrew Pantuso <ajpantuso@gmail.com>
* Add GetHostInterfaces command to redfish_info
Adding a GetHostInterfaces command to redfish_info in order to report the
following:
- Properties about the HostInterface(s) like Status, InterfaceEnabled, etc
- ManagerEthernetInterface (info on BMC -> host NIC)
- HostEthernetInterfaces (list of NICs for host -> BMC connectivity)
fixes#3692
* add fragment
* fixup for linter
* redfish_utils.py cleanup
- Remove unneeded Properties list from get_nic_inventory()
- Remove bogus key variable from get_hostinterfaces()
- Add additional Properties to collect from HostInterface objects
* fixup for stray deletion
* Enable counter_enabled.py to support serial mode
Enable counter_enabled.py to support batch playbook executions using the serial tag in plays. Currently, the host counter gets reset at the beginning of every task. However, during batch executions we want it to keep track of the previous batch executions and print the host counter based on the previous runs. This proposal keeps track of how many servers have been updated in previous batches and starts the host counter at that tracked value.
```
- hosts: allthethings
gather_facts: no
serial:
- 3
- 15%
- 20%
- 35%
- 55%
- 90%
- 100%
tasks:
- name: Ping Hello!
ping:
data: "Hello!!!!"
```
* Reset task counter on play start
Reset task counter on play start for batch mode playbook executions.
* Add changelog fragment
* change changelog fragment after feedback
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* redfish_config: Add support to configure Redfish Host Interface
Adding another Manager command to redfish_config in order to set Redfish
Host Interface properties.
Fixes#3631
* add fragment
* fixup for fragment filename
* Update plugins/modules/remote_management/redfish/redfish_config.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Add support for specifying HostInterface resource ID
* Apply suggestions from code review
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/remote_management/redfish/redfish_config.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update changelogs/fragments/3632-add-redfish-host-interface-config-support.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Fix exception in xattr module when existing extended attribute's value contains non-printable characters and the base64-encoded string contains a '=' sign
* Added changelog fragment for #3675
* Apply suggestions from code review
Co-authored-by: Felix Fontein <felix@fontein.de>
* Add test which allows to query whether an action is available.
* Add documentation.
* Fix FreeBSD / macOS compatibility.
* Rename an_action -> a_module.
* Forgot one place.
* Fixed - TypeError: unexpected keyword argument
- File proxmox_group_info.py creates the error "TypeError:
get_group() got an unexpected keyword argument \'group\'\r\n'" if a
group parameter is used.
Issue is an argument naming conflict. After changing the argument
name to 'groupid', as used in method ProxmoxGroupInfoAnsible::get_group,
testing a Proxmox group name is working now.
* Changelog fragment added for #3649
changelog fragment for TypeError: unexpected keyword argument #3649
* Update changelogs/fragments/3649-proxmox_group_info_TypeError.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
While porting this module to make use of `pyone` I have overlooked one
attribute. Luckily the error only occurs when trying to rename an image
to a name that has already been taken.
Instead of telling the user which image ID already uses that name, the
module failed with the following error (along with a huge backtrace):
AttributeError: 'IMAGESub' object has no attribute 'id'
With this commit the error message is much more obvous again.
* add the possibility to restart all supervisorctl programs and groups
Signed-off-by: Thomas Sjögren <konstruktoid@users.noreply.github.com>
* Update changelogs/fragments/3551-supervisor-all.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* add info about "all" in the name parameter description
Signed-off-by: Thomas Sjögren <konstruktoid@users.noreply.github.com>
* Update plugins/modules/web_infrastructure/supervisorctl.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* provide more fitting description for runner timeout
* Update plugins/modules/source_control/gitlab/gitlab_runner.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Tim Herren <tim.herren@gmx.ch>
Co-authored-by: Felix Fontein <felix@fontein.de>
* KeycloakClientDiffBugs - Introduce test that passes.
* KeycloakClientDiffBugs - Add test to show that checking of redirect_uri's fails.
* KeycloakClientDiffBugs - (Fix1) Update so that checking of `redirectUris` no longer shows a change.
* KeycloakClientDiffBugs - Add test to show that checking of attributes's fails (sorting issue)
* KeycloakClientDiffBugs - (Fix2) Update so that checking of `attributes` no longer shows a change.
* KeycloakClientDiffBugs - Add test to show that checking of protocol_mappers's fail
* KeycloakClientDiffBugs - (Fix3) Update so that checking of `protocol_mappers` no longer shows a change when there is none.
* Introduce code fragment.
* Update the changelog to be based on the PR instead of the issue.
* Fix the readme
* Fix yaml indentation.
* Fix pep8
* Update changelogs/fragments/3610-fix-keycloak-client-diff-bugs-when-sorting.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update changelogs/fragments/3610-fix-keycloak-client-diff-bugs-when-sorting.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/identity/keycloak/keycloak_client.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Remove need for .copy() after making normalise_cr not mutate the dict.
Co-authored-by: Pierre Dumuid <pierre@knowyourdata.com.au>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Allow for the pacman repository check to be skipped when it's not needed
* Adding a changelog fragment
* Undo the variable rename because the lint doesn't like it
* Update changelogs/fragments/3606-pacman-speed-up-check-if-package-is-installed.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Elie Moreau <emoreau@atlassian.com>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update gitlab_project_members.py
The actual search method doesn't accept path with namespace for project_name. If you have many project with same name, this module gitlab_project_members can't work.
* Update gitlab_project_members.py
* Update gitlab_project_members.py
* Update gitlab_project_members.py
* Create 3602-fix-gitlab_project_members-improve-search-method
* Rename 3602-fix-gitlab_project_members-improve-search-method to 3602-fix-gitlab_project_members-improve-search-method.yml
* Add initialize_with_readme option to gitlab_project. Update integration/unit tests.
* Fix pep8
* Revert unit tests
* Update plugins/modules/source_control/gitlab/gitlab_project.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/source_control/gitlab/gitlab_project.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/source_control/gitlab/gitlab_project.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Move initialize_with_readme to proper spot to only add if project does not exist.
* Update plugins/modules/source_control/gitlab/gitlab_project.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* pipx - fixed bug in state=inject
* added changelog fragment
* copy/paste error in the integration test
* replaced injected package with simpler one
* testing force_lang = None
* disable UTF-8 emojis in pipx output
* better way to achieve the same outcome
* Adjsuted the changelog fragment
* added module mssql_script
* Add changelog fragment
* fixed fragment file (yamllint)
* added me as maintainer
* minor cleanup. (PR comments)
* adjusted for PR comments
- changed key for query results depending on output
- removed "empty" string defaults
* convert unserializable values to string
* python 2 support
* Apply suggestions from code review
Co-authored-by: Felix Fontein <felix@fontein.de>
* updates to docs
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* dnf_versionlock: new module
* dnf_versionlock: fix style in doc
* dnf_versionlock: use check_rc in run_command
* dnf_versionlock: fix style and typos in doc
* Consistent Modules - Rename updated_?? to desired_?? in all the keycloak modules.
* Consistent Modules - Rename the comments, and add whitespace so that all the modules are a lot more consistent between each other.
* Consistent Modules - Remove final elif where a final else doesn't exist.
This is to address the inconsistency between the other modules.
Whilst I can see it being more descriptive, there should be a final "else:" to cater if the values is neither 'absent' or 'present'.
* Consistent Modules - Use dict() instead of {} like most of the other keycloak modules.
* Consistent Modules - Update keycloak authentication so that the if ordering is consistent for no-item.
* Consistent Modules - Move the 'Filter and map' process to always occur before getting an existing item.
* Consistent Modules - Be consistent with how to initialse before_?? and set it to dict() if it is None.
* Consistent Modules - Add module.exit_?? in the locations as per the other modules.
* Consistent Modules - Represent result['diff'] using dict(before=.., after=...) as per all the other modules.
* Consistent Modules - Add / Move location of when result['end_state'] is getting defined.
* Consistent modules - Add result['changed'] = False where we do nothing and exit because item exists.
* Consistent Modules - Set the value result['changed'] to True earlier so it shows up when in checking mode only.
* Consistent Modules - test for equality with a dict to assert there was no realm in the first place as per the other modules.
* Consistent Modules - Address the spelling.
* Consistent Modules - keycloak_group - Remove result['group'] as result['end_state'] is the consistent value used in the other modules.
* Consistent Modules - Order the lines in the section, Do nothing and exit consistently.
* Consistent Modules - Add result['end_state'] and still add deprecated `flow` return value.
* Consistent Modules - Add missing return documentation for `msg`.
* Consistent Modules - Tweak whitespace in the RETURN variable.
* Consistent Modules - Add result['group'] in addition to deprecated result['group'] response.
* Consistent Modules - Add return property, 'contains' to address test errors.
* Consistent Modules - Rename updated_?? to desired_?? in new modules since initial PR.
* Consistent Modules - Rename the comments, and add whitespace so that all the (recently added) modules are a lot more consistent between each other.
* Consistent Modules - Make indentation consistent within the response document.
* Consistent Modules - Use B(DEPRECATED) in a seperate line in the description.
* Consistent Modules - Add a lot of full stops to sentences.
* Consistent Modules - Use C(...) and I(...) formatting methods.
* Consistent Modules - Use "on success" everywhere for end_state response documentation.
* Consistent Modules - Update the documents for RETURN.proposed, RETURN.existing, RETURN.end_state to be the same.
* Consistent Modules - Add fragment.
* Remove period after short_description.
* Update changelog fragment.
* Consistent Modules - PRFeedback - Remove `module.exit_json(**result)` within the `Delete` section of the if statement.
There's a exit_json(..) immediately after.
* Consistent Modules - PRFeedback - Use `if not x_repr` instead of `if x_repr == dict()`.
* keycloak_authentication - Add a sample of the output.
* Replace `dict()` with `{}` for all the keycloak modules.
* Add the requested deprecated notices
* Update changelogs/fragments/3280-keycloak-module-cleanup-and-consistency.yml
Co-authored-by: Pierre Dumuid <pierre@knowyourdata.com.au>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Added redis_incr module
Added redis_incr module and unit tests for the module.
Added suggested changes to increment_float, increment_int stuff
* rebased to main, version fix and unit test fix
* Renamed module,added check_mode and fixed retun value
* Update .github/BOTMETA.yml
* check_mode fix and version bump
* fix for lower Redis versions
* Update plugins/modules/database/misc/redis_data_incr.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Fix exception in pkgin module when all packages are already installed.
* Update plugins/modules/packaging/os/pkgin.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Add changelog fragment for #3583
Co-authored-by: Felix Fontein <felix@fontein.de>
* pkgng: package reinstallations count as changed
`upgrade_packages()` only looked for the string
"Number of packages to be upgraded", but the
`pkg upgrade` command also reports "Number of packages to be
reinstalled". Reinstallation occurs when package metadata other
than version changes (e.g. build options, single architecture to `*`
architecture). In any other respect, though, a required
reinstallation is the same as an upgrade.
* pkgng: check_mode should count queued actions
Writing tests caught a bug in PR #3393, which enabled
installing more than one package per `pkg` execution.
In converting the module's install/upgrade code to a
queue structure, check_mode got broken because the count
of actions performed was only updated in the `if not check_mode`
block that invokes `pkg`. This two-line change counts
the number of actions in the queue when check mode is
enabled.
* pkgng: add basic integration tests
Test installing a package
Test installing a package into a jail
* pkgng: test with zsh not bash package
Had been using bash package, because it's not
likely to disappear from the package repository
any time soon. Turns out that bash is already
installed on the Ansible community.general
FreeBSD CI VM image, which makes the test fail.
Zsh probably isn't going away any time soon,
either, and likely won't be installed on the
CI image.
* pkgng: remove redundant test for docker container
These tests should be skip/docker, but the test
playbook also redundantly checked whether it was
running in a docker container.
Checking whether `ansible_facts.distribution` is
`FreeBSD` is really sufficient to be sure whether
the test is running in an environment that supports
the `pkgng` module.
* pkgng: add state=absent test
Also renumber `jail=...` test to make diffs less
noisy when adding more non-jailed tests.
* pkgng: add state=latest idemptency test
Add test between state=present and
state=absent that ensures state=latest runs
successfully on an already up-to-date package
with changed=false.
* pkgng: add state=latest test
Including small filesize out-of-date package from
FreeBSD 11 package repository, because FreeBSD 11 is
currently EOL. This test might fail at some point in the
future if the pkg utility in a FreeBSD version > 14
makes breaking changes that prevents it from installing
older package formats.
If that occurs, the fix is to replace
`files/freebsd-release-manifests-20210413__FreeBSD_11.pkg`
with the version of freebsd-release-manifests from the oldest
non-breaking release of FreeBSD, and update the
references to it in tasks/main.yml accordingly.
* pkgng: use hand-generated test package
Instead of relying on a broken-ish installation
of an older package from FreeBSD 11, hand-generate
a package named `zsh` with no contents and a version
number of `0`. It can be installed on any architecture
and any revision of FreeBSD sucessfully, and it will
always be eligible for upgrade.
* pkgng: CI seems to dislike plus-signs in filenames
* pkgng: refactor renaming test package manifests
refactored to make intent of adding '+' sign clearer
* pkgng: refactor upgraded pattern matching
Implement russoz's suggestion to put all
variants in the pattern.
* pkgng: add cached=yes test
Changed idempotency test, because this covers both.
* pkgng: test pkg works on any FreeBSD version
Removing `ansible_distribution_version`, because the
test out-of-date zsh package should install on any
FreeBSD version.
* pkgng: move FreeBSD tasks to imported file
Refactoring tests for more reuse and easier
readability.
* pkgng: refactor tests for task reuse
Several tests need to install an out-of-date package
to test whether upgrades occur successfully, so this
commit refactors out the generation of the test package.
Also, factor out things like the name and path of the
test package so that is more maintainable should the
target test package (currently `zsh`) ever need to
change.
* pkgng: test install multiple packages
Multiple packages should install with a single
invocation of the `pkg` utility.
* pkgng: handle space- and comma-separated lists
The module expects a list of strings in the `name` parameter,
but long-standing documentation showed space- and comma-delimited
lists as a valid way of telling the module to act on multiple
packages. Passing these lists through to the `pkg` command can
have unexpected side-effects of upgrading packages when
`state=present` rather than `state=latest` and could result
in the module reporting the wrong number of packages for each
action performed.
* pkgng: test state=latest for mixed install/upgrade
Test that a list of packages given, one not installed
and one installed but out-of-date are handled correctly.
* pkgng: use YAML lists for multiple packages
I had been following the documentation examples, and
specifiying multiple packages on one line. The right way
to do it is with YAML list syntax.
* pkgng: add test for autoremove=yes
Install package with known dependencies, then
remove it and ask autoremove to run.
* pkgng: test autoremove=yes only on FreeBSD > 12
The CI test runner on FreeBSD 12.0 times out when
downloading large packages.
* pkgng: test jail creation logging less verbose
`ezjail-admin` had been spewing every filename copied
into the jail onto stderr, making the `ansible-test -v`
logs hard to scroll through. Changed it so that ezjail
output only shows up in the ansible task logs if
`ansible_verbosity > 1` (`-vv...`). Full `ezjail-admin`
output is always logged to `/tmp/ezjail.log`.
* pkgng: pass tests when package dependencies change
Tests that install packages with dependencies were failing
when those dependencies were not already installed, because
the count of installed packages was greater than the count
of requested to be installed packages. This change checks
for a count of installed packages that is greater than or
equal to the count of requested to be installed packages.
Example:
- Test installs packages `zsh` and `fish`
- `fish` has a dependency on `pcre2`
- `pkg` reports `Number of packages to be installed: 3`
* pkgng: test annotation for single package
Add/modify/remove annotation for a single package
* pkgng: fix annotation operations
Annotation has been broken at least since the migration to
collections. There are some breaking typos and function argument
omissions in the code with nothing in `git blame` but "Initial commit".
New integration tests uncovered this breakage. Works now.
* pkgng: test multiple annotations
Test multiple annotations specified both in new (YAML list)
syntax and old (comma-delimited) syntax.
Rename some annotation test tags from the single-annotation
tests to make sure that single and multiple annotation tests
don't collide.
* pkgng: test invalid annotate strings
Ensure that some likely to occur, invalid strings
given to the annotate module parameter 1. fail,
2. do not cause an exception, and 3. do not create
any actual annotations on packages.
* pkgng: fix check_mode for annotate
Actions specified in the `annotate` parameter would
always be performed, even if `check_mode=yes`.
This commit fixes `check_mode` for the annotation
functions and adds integration tests to ensure that
check mode is honored in the future.
* pkgng: call module.run_command with list
Instead of calling `run_command` with a formatted
string, call it with a list to maintain safer argument
separation.
Also, introduce a wrapper for `run_command`, `run_pkgng`,
which manages the process environment and some common
command line switches, based upon the module parameters.
Introduced in this commit, also pass annotation values
to `pkg annotate` via stdin, which is safer with long
values than putting them in argv.
* pkgng: update documentation to match annotate type
Missed updating the documentation to match the change
of the annotate parameter from comma-separated string
to list of strings.
* pkgng: fix syntax for Python 2
Seems *args, **kwargs have to be the last
two arguments in Python 2 syntax. CI sanity
tests were failing.
* pkgng: oops, pkgsite should be from closure
I put `pkgsite` as a keyword argument to `run_pkgng()',
which wasn't correct at all and resulted it in capturing
the second positional argument given by any caller.
`pkgsite` should have been `p["pkgsite"]`, coming from the
closure environment of `main()`.
* pkgng: Fix changelog fragment quote formatting
Co-authored-by: Felix Fontein <felix@fontein.de>
* pkgng: add test prepare task
Make sure test environment does not contain the
test package.
* pkgng: make integration test package more flexible
Make integration test package building template-based,
so more flexible if in the future the name of the test package,
currently `zsh`, must change.
* pkgng: convert generator to list for 2.9
Ansible 2.9 can't count items from a generator,
so convert `select` filter output via `list`
before passing to `count`.
* pkgng: Ansible 2.9 has no "false" Jinja2 test
Apparently Ansible 2.9 doesn't have the "false" test
in Jinja2 contexts. Switching to use `rejectattr(...)`
instead of `selectattr(..., "false")`.
* pkgng: test pkgsite parameter
* pkgng: add tests for chroot and rootdir params
Refactor install tasks into an include file so they
can be reused and tested with various parameters.
* pkgng: clean up test package creation
Make pkg json manifest more readable. Create package using
FreeBSD's `pkg create` instead of manually using tar. This
change also simplifies the manifest to a single file for
the integration test role.
* pkgng: fix#3428; install from local file
Fixes a bug in which the module reported failure
when installing from a local (to the target host)
file path.
Fixes#3428
* pkgng: changelog fragment formatting issue
* pkgng: check for all test package extensions
pkg recently changed file extensions, so for the
tests to work on multiple recent versions of FreeBSD,
we must check for `pkg create` output with varying
filename.
* Revert "pkgng: fix#3428; install from local file"
As the module has invoked pkg with the `-g` flag for
at least 7 years, I'm not sure when it was possible
to install packages from files on the target host
filesystem, because pkg rejects file paths when
the `--glob` flag is enabled.
I considered doing a rework of the pkg invocation
to enable good support for installing from local
files, but it looks like more of a job than for this PR.
This reverts commit 5f94eac41f.
* pkgng: Add minor_changes fragment for #3526
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Redfish: Do not set the boot source override mode if not provided by the user
Signed-off-by: Mike Raineri <michael.raineri@dell.com>
* Corrected changelog file extension
Signed-off-by: Mike Raineri <michael.raineri@dell.com>
* Update changelogs/fragments/3509-redfish_utils-SetOneTimeBoot-mode-fix.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* nmcli: Fix ipv6.dns not being recongnized as list
There was a missing comma on the previous line.
* nmcli: Add changelog fragment for #3563
* nmcli: Update changelogs/fragments/3563-nmcli-ipv6_dns.yaml
Make the fix description more descriptive
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
* nmcli: Remove ipv4.route-metric from list-typed properties
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
* nmcli: Update fragment 3563 with ipv4.route-metric bug
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
* Redfish: perform manager network interface configuration even if property is missing
Signed-off-by: Mike Raineri <michael.raineri@dell.com>
* Update changelogs/fragments/3404-redfish_utils-skip-manager-network-check.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* [callback][elastic] enrich span with http attributes
* [callback][opentelemetry] fix linting
* [callback][opentelemetry] fix UTs
* [opentelemetry][changelog] add fragment for the service map feature
* Update plugins/callback/opentelemetry.py
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
* [opentelemetry][callback] remove comments
* [opentelemetry][callback] fix UTs
* [opentelemetry][callback] return the value
otherwise a None value returns ParseResultBytes when using urlparse(None)
* [opentelemetry][callback] fix wrong parameter order
* [opentelemetry][callback] support for no interpolated URLs
* [opentelemetry][callback] support for URLs without interpolation in the hostname
* [opentelemetry][callback] fix linting
* Update changelogs/fragments/3558-callback_opentelemetry-enrich_service_map.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
Co-authored-by: Felix Fontein <felix@fontein.de>
* ipa: add append parameter to modify_if_diff
* ipa_group: add state: append
* ipa_group: rework append to an option instead of another state
* ipa_group: append default=no
* ipa_group: add change fragment for new append option
* ipa_group: restore descriptions for group and user
* ipa_group: re-add missed quotation mark
* ipa_group: set default for append in
argument_spec
* ipa_group: add .yml ext to fragement file
* ipa_group: corrections to append description
* ipa_group: refine change fragement text
Co-authored-by: Felix Fontein <felix@fontein.de>
* ipa_group: use correct macros in option descriptions
Co-authored-by: Felix Fontein <felix@fontein.de>
* ipa_group: include append in user and group descriptions
* ipa_group: add version_added
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Add names to tasks in oneview module examples
* Fix task name in github_webhook module example
* Fix trailing whitespace
* Add changelog fragment
* Remove changelog fragment
* Integration Tests for Options added, includes 'proxycommand'
* New option 'forwardagent' added to integration tests
* Missing double quotes added to 'forwardagent' values to enforce handling as string
* New option 'forwardagent' added
* yamllint error resolved
* 'forwardagent' type changed from str to choices (yes/no)
* Changelog added
* correct typo
Co-authored-by: Felix Fontein <felix@fontein.de>
* version info added to new option
Co-authored-by: Felix Fontein <felix@fontein.de>
* fix(ssh_config): option name to snake_case, type str to bool
* fix(ssh_config): convert bool true/false to str yes/no
* fix(ssh_config): rename option to 'forward_agent' in integration test
* fix(ssh_config): args key 'forwardagent' renamed to 'forward_agent'
* fix(ssh_config): 'else' replaced with 'if' statement to cover case when value is 'None'
* increase version_added to 4.0.0
Co-authored-by: Felix Fontein <felix@fontein.de>
* simplify if statement for True/False to yes/no mapping
Co-authored-by: Felix Fontein <felix@fontein.de>
* update comment to better describe functionality
Co-authored-by: Felix Fontein <felix@fontein.de>
* fix(ssh_config): avoid overwrite of existing option in case of None value
* test(ssh_config): case added to verify no changes on existing option if not given in playbook
Co-authored-by: Felix Fontein <felix@fontein.de>
* macports: add stdout and stderr to status (#3499)
* Add changelog fragment
* Update changelogs/fragments/3500-macports-add-stdout-and-stderr-to-status.yaml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Aoife Finch <aoife@finch.ink>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Add elastic callback plugin
* Capture task failures
* Catch errors and add UTs
* Skip 3.5< python versions and install dependency
* fix lint
* Fix linting
* Fix linting
* Add botmeta
* Apply suggestions from code review
Co-authored-by: Felix Fontein <felix@fontein.de>
* It's not required
* As suggested in the code review OrderedDict has been added to the Python stdlib since version 2.7
* Update plugins/callback/elastic.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* pkgng: join package list into one command
Change the pkgng module so all packages being
installed (or upgraded) are acted on in one
command (per action). This will make installs
and upgrades a bit faster, because pkg will be
invoked fewer times per module run. More important,
module actions will be more atomic, making it less
likely that some packages are acted on because they
appear earlier in the argument list.
This change also improves the status reporting of
packages acted on, specifying the number of packages
for each action (install or upgrade).
* pkgng: make upgrade check lazily evaluated
Make upgrade_available an inner function so that the
if statement that checks whether installed packages
are up-to-date only runs the upgrade check on packages
that are already installed. This gets lazily evaluated
because of boolean operator short-circuiting:
https://docs.python.org/3.8/library/stdtypes.html#boolean-operations-and-or-not
Previously, the module would always check for upgrades,
even for not-installed packages, when running with
`state=latest`.
* pkgng: add changelog fragment
* pkgng: Apply changelog suggestions from code review
Co-authored-by: Felix Fontein <felix@fontein.de>
* pkgng: resolve pep8 style issue
Remove inline function. It's purpose would be confusing for
future maintainers, and someone refactoring it to a variable,
with good intentions, would introduce a performance regression.
Including the `query_update()` call in the if expression makes
the intent more legible and still ensures lazy evaluation of the
function call if the first `and` is `False`.
* pkgng: Fix changelog fragment syntax issue
Need to escape quotes so YAML doesn't eat them
Co-authored-by: Felix Fontein <felix@fontein.de>
* pkgng: Improve output message English grammar
Make word "package" plural only if reporting on more than one package
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* If repo option points to .repo file, download for later parsing
* Parse downloaded .repo file content (ini format)
* Validate downloaded file, map values to repodata, workaround to ignore old .repo related code
* Integration Test adjusted to install python package 'requests' first
* Revert "Integration Test adjusted to install python package 'requests' first"
This reverts commit 0d18352c2238d098831ba6d59b66e731fa8f0cd9.
Not allowed to introduce new dependencies at this point, module_utils usage required
* Remove python 'requests' dependency, using 'fetch_url' and 'to_text' from 'ansible.module_utils' instead
* Prefer alias (name) if given instead repo (url)
* If gpgkey was given in .repo file ensure key get automatically imported
* ConfigParser Import made Python2 compatible
* New .repo code moved below existing run-time parameters checks to keep previous logic
* Obsolete workaround removed
* two pylint/pep8 errors fixed
* name added to autorefresh assert
* Missing assert for 'Delete test repo' added
* name added to priority option assert
* name added to check repo is updated by url assert
* name added to check repo is updated by name assert
* name added to check add a repo by releasever assert
* name added to check remove added repo assert
* name added to check add a repo by basearch assert
* name added to check remove added repo #2 assert
* Bugfix to avoid 'KeyError' Exception in if statements
* Refactoring of configparser related code, usage of module_utils, py2 compatibility
* Removal of some leftover from earlier testing
* Integration tests for add/remove repositories by url to .repo file added
* Additional name added to list of test repos that has to be removed
* Test added to verify cleanup of local .repo file after removal via zypper
* Changelog fragment related to PR #3474 added
* yamllint error resolved
* Refactoring to reduce indentation and removal of else statements
* Integration tests added for loading .repo file from local path
* Test .repo file added
* Dependency to setup_remote_tmp_dir added
* New entry added to 'remove repositories added during test'
* Support for .repo file from local path
* Changelog: Ref to https://github.com/ansible-collections/community.general/issues/3466 added
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* [ufw] Insert or delete biased when deletion enabled - as for append or delete.
* [ufw] Insert or delete biased when deletion enabled - as for append or delete.
* [ufw] Insert or delete biased when deletion enabled - as for append or delete.
* [ufw] Insert or delete biased when deletion enabled - as for append or delete.
* [ufw] Insert or delete biased when deletion enabled - as for append or delete.
* [ufw] Insert or delete biased when deletion enabled - as for append or delete.
* [ufw] Insert or delete biased when deletion enabled - as for append or delete.
* [ufw] Insert or delete biased when deletion enabled - as for append or delete.
* [opentelemetry][callback] add option to support enabling plugin in the CI only
* [opentelemetry][callback] add changelog fragment
* Apply suggestions from code review
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
* [opentelemetry][callback] use enable_from_environment
* Apply suggestions from code review
Co-authored-by: Felix Fontein <felix@fontein.de>
* [opentelemetry] ensure the value is true otherwise the plugin is not enabled
* [opentelemetry][changelog] update entry with the new option
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
Co-authored-by: Felix Fontein <felix@fontein.de>
* pipx - new module
* using python instead of python3
* removed ensure_path as it is unused
* ensuring we are running the same python as Ansible
* changed the last solution to adding a pipx_path parameter to the module, with a sensible default
* added docs for the new parameter
* changed param name to executable, and customized it for Darwin
* use executable if passed, otherwise use python -m pipx
* minor update
* added examples
* Update plugins/modules/packaging/language/pipx.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/packaging/language/pipx.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/packaging/language/pipx.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* tests names 324 -> 3.24.0
* ensure tox is uninstalled by the beginning of the test
* Renamed option+suggestions from PR
* improved idempotency
* fixed sanity
* fixed test
Co-authored-by: Felix Fontein <felix@fontein.de>
* Fix: gitlab_deploy_key idempotency
The module was not retrieving all the deploy keys leading to non
idempotency on projects with multiple deploy keys.
SEE: https://python-gitlab.readthedocs.io/en/stable/api-usage.html#pagination
* Update changelogs/fragments/3473-gitlab_deploy_key-fix_idempotency.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Jonathan Piron <jonathanpiron@gmail.com>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Started creating Unit tests for Proxmox Tasks module
* Tried really hard to get the mock to work
* unit tests for the module
* Fixed symslink and permissions
* Suggested changes and more unit tests
* Fixed isFalse
* Apply suggestions from code review
* Update plugins/modules/cloud/misc/proxmox_tasks_info.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* OrderedDict has been added to the Python stdlib since version 2.7
* Docs: cosmetic change in the python lib
* See https://github.com/ansible/ansible/issues/75726
* Add changelog fragment
* Apply suggestions from code review
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Copy the permissions along with file for jboss module
Issue: The deployment file is copied with file content only. The file
permission is set to 440 and belongs to root user. When the
JBossI(Wildfly) server is running under non root account, it can't read
the deployment file.
With is fix, the correct permission can be set from previous task for JBoss
server to pickup the deployment file.
* Update changelogs/fragments/3426-copy-permissions-along-with-file-for-jboss-module.yml
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
* Updated nmcli.py
Amended the routing-rules4 values as list. By this we could add the entries for "routing_rules4" in the form of a list .
* Update nmcli.py
Fixed typo in line #1701
* 3395-nmcli-needs-type.yml
routing_rules4 module argument is currently accepting only string elements. In order to accept multiple values, amended the type of routing_rules4 as list.
* nmcli: amended the routing-rules4 key values as list
routing_rules4 module argument is currently accepting only string elements. In the case of adding multiple entries to routing_rules4, we need to accept values as list.
* Added 3401-nmcli-needs-type.yml
routing_rules4 module argument is currently accepting only string elements. In the case of adding multiple entries to routing_rules4, we need to accept values as lists
* Amended type to 'minor_changes'
Amended type to 'minor_changes' from 'bug_fixes'
* routing_rules4 to a list of element str
nmcli.py - routing_rules4 to a list of element str
* Update changelogs/fragments/3401-nmcli-needs-type.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* nmcli: allow routing-rules4 key values as list
* nmcli: amended the routing-rules4 key values as list
* nmcli: amended the routing-rules4 key values as list
* nmcli: amended the routing-rules4 key values as list
* test_nmcli: amended whitespaces
* Update 3401-nmcli-needs-type.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* Added OpenNebula inventory plugin
Signed-off-by: Kristián Feldsam <feldsam@gmail.com>
* Apply suggestions from code review
Co-authored-by: Andrew Klychkov <aaklychkov@mail.ru>
* Apply suggestions from code review
Co-authored-by: Felix Fontein <felix@fontein.de>
* Removed matching inventory yaml files ending with "one"
Too general word
* Apply suggestions from code review
Co-authored-by: Felix Fontein <felix@fontein.de>
* Apply suggestions from code review
Co-authored-by: Alexei Znamensky <103110+russoz@users.noreply.github.com>
Signed-off-by: Kristian Feldsam <feldsam@gmail.com>
* Added BOTMETA
Signed-off-by: Kristian Feldsam <feldsam@gmail.com>
* Moved import
Signed-off-by: Kristian Feldsam <feldsam@gmail.com>
* Fix indentation problem
Signed-off-by: Kristian Feldsam <feldsam@gmail.com>
* Added group_by_labels, refactored so can be unit tested
Signed-off-by: Kristian Feldsam <feldsam@gmail.com>
* Added unit tests
Signed-off-by: Kristian Feldsam <feldsam@gmail.com>
* Removed blank line
Signed-off-by: Kristian Feldsam <feldsam@gmail.com>
* Apply suggestions from code review
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Andrew Klychkov <aaklychkov@mail.ru>
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Alexei Znamensky <103110+russoz@users.noreply.github.com>
* enable deprecate message for ignore_volatile_options
* fix E128
* add frament 3429
* remove default value and modify the resulting checks
spelling fixes
bump version for deprecated messge
* fix spelling and depricated version
Co-authored-by: Frank Dornheim <“dornheim@posteo.de@users.noreply.github.com”>
* chore: add deprecation warning
* chore: add deprecation message, version and collection
* chore: add changelog fragment
* docs: add deprecation info
* fix: max line length and whitespace
* fix continuation line under-indented
* Update changelogs/fragments/3451-gitlab-group-member-deprecate-name-and-path.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/source_control/gitlab/gitlab_group_members.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* fix: return correct group id
match only full_path or name
* chore: add changelog fragment
* fix: indentation multiple of four
* refactor: use two loops
* fix: typo of group id
* fix: changelog fragment
* Fix diff mode when updating authentication flow with keycloak_authentication module
* Update documentation of create_or_update_executions function (return tuple instead of dict)
* Fix: Update requirement when new exex created
* Add changelog fragment
* Update changelogs/fragments/3330-bugfix-keycloak-authentication-flow-requirements-not-set-correctly.yml.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update changelogs/fragments/3330-bugfix-keycloak-authentication-flow-requirements-not-set-correctly.yml.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* Edit requirement of sublow
Co-authored-by: Felix Fontein <felix@fontein.de>
* Adding capability to specify ehlo hostname
* Fixing default for ehlohost
the CI did not like "None" as default in the documentation,
judging from the rest of the definitions omitting that seems to be right
* Update plugins/modules/notification/mail.py
Proper spelling in documentation
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
* Adding Changelog Fragment
* Update changelogs/fragments/3425-mail_add_configurable_ehlo_hostname.yml
Proper phrasing in changelog
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
* integration-test for ehlohost parameter
* proper description, increased async-time
changed body of ehlohost-mail to reflect ehlohost
increased async from 30 to 45 as CI failed because
smtp was already down.
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
* do not ignore volatile - fix#2466
* remove unnecessary checks
* fix ansible-tests sanity
* fix access to the option: ignore_volatile_options
* add fragment
* fix quotation marks error
* fix review findings
* fix sanity error
* fix description - in yaml examples use true not True
comment out the deprecate message
* remove "default=True" at ignore_volatile_options
fix spelling
* fix sanity error that ignore_volatile_options have no default value
* undo changes. add defaut value and remove keyword at dict.get()
* fix sanity error
* small spelling fixes
* change text for fragment
* Fix description sentence.
Co-authored-by: Frank Dornheim <“dornheim@posteo.de@users.noreply.github.com”>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Added redis_set module
Added redis_set module and unit tests for the new module.
Applied suggested changes and removed redis_del in favor of state
option.
Also added redis utility class that handles connection.
* Typos, added version and BOTMETA
* Fixed import error checking
* Fixed Unit tests
* Docfix and return consistency
* Added Check Mode
* Update plugins/modules/database/misc/redis_data.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* kernel_blacklist - revamped the module
* file default and setting "lines" when file does not exist
* added changelog fragment
* added change in arg_spec to the documentation block
* Update plugins/modules/system/kernel_blacklist.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/system/kernel_blacklist.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/system/kernel_blacklist.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* fixed: initialize self.pattern before self.var.is_blacklisted
* File writing recoded
* added try/finally for the file
* multiple changes:
- fixed case when last line of the existing file has no newline char
- added integration tests
* PR: integration test now using remote_tmp_dir
Co-authored-by: Felix Fontein <felix@fontein.de>
If package installation has an error after the package is install (e.g.
when running tags), then there will be output on stderr and the fallback
regex will match; however, since pkg_add exited non-zero, changed is
never added as a key to the dictionary. As a result the code at the end
of main that checks if anything has changed raises a KeyError.
* pythonific!! no camel cases, bitte
* simplified iface attributes parsing
* some improvements, passing tests
* simplified set_interface_option()
* further simplifications
* remove unreachable stmt
* pythonified a file open
* added changelog fragment
* adjustment per PR
* PR: fixed the auto- case
* PR: added testcase and chglog frag for the misleading change report
* extra line removed
* integration is not destructive
* Adding "Id" to the add user function
Some implementations of Redfish (e.g. the one in Cisco's CIMC) seem to require the id of the new user for account creation.
I'm not that firm with Python but lines 982 and 983 should fix it.
* changed indention
* created changelog fragment
* Update changelogs/fragments/3343-redfish_utils-addUser-userId.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update change type
* supplemented the description of the ID parameter
* Update plugins/modules/remote_management/redfish/redfish_command.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Add opentelemetry callback plugin
* Apply suggestions from code review
Co-authored-by: Felix Fontein <felix@fontein.de>
* Formatting (text), booleans and renamed env variables
* This should be done in a future release
* Remove insecure in favour of the OTEL env variable. Add descriptions
* Use OpenTelemetrySource
* Move generate_distributed_traces
* Move update_span_data and set_span_attribute
* Move finish_task
* Move start_task
* Refactor to support UTs
* Add first UT
* Fix codestyle
* opentelemetry callback entry in the botmeta
* Fix linting
* Fix signature
* Mock methods
* Use MagicMock
* Mock the methods
* UT for transform_to_boolean_or_default
* Fix linting
* Set test data
* Mock _time_ns
* Exclude tests for python <= 3.6
* Remove obsoleted setup task type configuration
* Remove unused docs
* Apply suggestions from code review
Co-authored-by: Felix Fontein <felix@fontein.de>
* Fix docs
* unrequired logic that was originally took from https://github.com/ansible/ansible/blob/devel/lib/ansible/plugins/callback/junit.py\#L226
* Use raise_from for the required dependencies
* Fix linting
* Add requirements for the UTs
* add missing dependency for the opentelemetry plugin in the UTs
* Add ANSIBLE_ prefix for the ansible specific options
* Add more context in the docs and remove duplicated docs
* As suggested in the code review
* Verify if the OTEL env variables for the endpoint were set
* Fix docs typo
* Fix linting
* Revert "Fix linting"
This reverts commit 3a54c827c5472553a6baf5598bc76a0f63f020c1.
* Revert "Verify if the OTEL env variables for the endpoint were set"
This reverts commit cab9d8648899c28c0345745690c4ec7a41f7e680.
* Remove console_output as suggested
* Apply suggestions from code review
Co-authored-by: flowerysong <junk+github@flowerysong.com>
* Delegate the definition of OTEL_EXPORTER_OTLP_INSECURE to the user
* Move definitions above, close to the class that uses them
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: flowerysong <junk+github@flowerysong.com>
* Added token parameter for AccessTokenAuthorizer
Parameters username and password are not required anymore because of
this.
* Added changelog fragments
* Apply suggestions from code review
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
* token authorizer is prioritized
token authorizer is prioritized when token parameter is set
* Apply suggestions from code review
Co-authored-by: Felix Fontein <felix@fontein.de>
* domain optional if token not provided
* Updated examples
- `base_url` is required everywhere
- examples for user, name + domain authorization included
- token authorization included
* Update 3327-tss-token-authorization.yml
* Apply suggestions from code review
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Initial commit
* Adding changelog fragment
* Further refactoring
* Fixing bad copy/paste and adding task for psutil >= 5.7.0 install
* Inverting psutil installation order to reduce duplication
* Optimizing regex compilation
* Adds few more gitlab group options
* Update plugins/modules/source_control/gitlab/gitlab_group.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Removes default for new string options
* Removes default from argument_spec
* Adds changelog fragment
* Update plugins/modules/source_control/gitlab/gitlab_group.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/source_control/gitlab/gitlab_group.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/source_control/gitlab/gitlab_group.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Maik Schueller <maik.schueller@sap.com>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Added redis_data_info module
Added:
- redis_data_info module and suggested 'exists' return flag.
- module_utils for redis with a base class that handles database connections.
- inhereited unit tests and added some new ones for the exit flag
* Docfix and sanity
* typo
* Suggested doc changes and ssl option
* TLS and validate_certs fix
* Set support_check_mode for info plugin
* Docfix and import errors
* Redis versioning Fix
* version bump and append fixes
* django_manage - fix fixures
* docs formatting adjustments
* param apps also in need of splitting
* oops, the splitted version was not being properly added to the command args
* added changelog fragment
* check for None
* moving to shlex.split()
* Update changelogs/fragments/3334-django_manage-split-params.yaml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Some vendors surround header etag with quotes, which need to be cleaned before sending a patch
* Minor change fragment
* Add etag strip quote option
* Rebase
* Cleanup fragment
* Apply suggestions from code review
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/remote_management/redfish/redfish_command.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Description update
* Update plugins/modules/remote_management/redfish/redfish_config.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Kyle Williams <kyle.williams@thetradedesk.com>
Co-authored-by: Felix Fontein <felix@fontein.de>
* - fix to issue 3041
- add func to work with user lists
- add func to set members to the ones give
* Added version_added to new parameter
* fixed elements in definition of gitlab_users nad wrong import in gitlab_users
* linter issues fixed
* added list elelements to argument_spec
* More whitspeaces for the linter
* Update plugins/modules/source_control/gitlab/gitlab_group_members.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* adapted changelog
* removed bugfix (other PR), changes due to review
* changed input handling according to review
* Fixed test findings
* Added list of dict to allow for specifying user/access_level tuples
* corrected doc section
* fixed parameter definitions
* removed strange additional import
* Update changelogs/fragments/3041-gitlab_x_members_fix_and_enhancement.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/source_control/gitlab/gitlab_group_members.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/source_control/gitlab/gitlab_project_members.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/source_control/gitlab/gitlab_group_members.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/source_control/gitlab/gitlab_group_members.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* fixed required if
* Update plugins/modules/source_control/gitlab/gitlab_group_members.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Added suggestions from PR
* fixed identation problem
* Update plugins/modules/source_control/gitlab/gitlab_group_members.py
Co-authored-by: Zainab Alsaffar <za5775@rit.edu>
* Update plugins/modules/source_control/gitlab/gitlab_group_members.py
Co-authored-by: Zainab Alsaffar <za5775@rit.edu>
* Update plugins/modules/source_control/gitlab/gitlab_group_members.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/source_control/gitlab/gitlab_group_members.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Recommended changes from discussionst
* Fixed issues from automatic tests
* added missing metaclass due to test finding
* added integration tests
* Update plugins/modules/source_control/gitlab/gitlab_group_members.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/source_control/gitlab/gitlab_group_members.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/source_control/gitlab/gitlab_group_members.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/source_control/gitlab/gitlab_group_members.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/source_control/gitlab/gitlab_group_members.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/source_control/gitlab/gitlab_group_members.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/source_control/gitlab/gitlab_group_members.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* fixed optimization for only one user
* Reverted gitlab_project_members to original version - changes will be done in a separate branch
* added examples for new functionality
* - fixed changelog after reverting gitlab_project_memebers
- fully reverted gitlab_project_members
* Fixed error handling: when single users are not updateable in bulk mode the exception should not stop the code flow but document the problem in the result.
* Better error handling
* on error give username, not gitlab numeric userid
* Fixed broken check_mode
* Update plugins/modules/source_control/gitlab/gitlab_group_members.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Change from review
Co-authored-by: Max Bidlingmaier <Max-Florian.Bidlingmaier@sap.com>
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Zainab Alsaffar <za5775@rit.edu>
* zfs.py: treated received properties as local and added diff mode support
If you use "zfs set" to explicitly set ZFS properties, they are marked as from source "local". If ZFS properties are implicitly set by using "zfs send" and "zfs receive", for example as part of a template based installation, they are marked as from source "received". But as there is no technical difference between both types of them, the “received” ZFS properties should also be considered “local”. Otherwise Ansible would detect changes, which aren’t actual changes. Therefore I changed line 202/207 to reflect this.
For us it’s quite important, that Ansible modules support the diff mode in order to qualify changes. Therefore I added some code lines to address this.
* added changelog fragment for PR #502
* fixed typos in changelog fragment for PR #502
* minor changes in changelog fragment for PR #502
* added link to pull request in changelog fragment for PR #502
* extended the diff data structure to always include the name of the zfs filesystem
* added code to also maintain the diff data structure after a change
* reverted back some code lines for better code readability
* added an extra dict in the diff data structure to hold the zfs properties
* udm_dns_record: Fix handling of PTR records (#3244)
Before, it was not possible to manage PTR records in Univention DNS,
due to broken zone lookups and improper used parameters of the object.
This patch fixes the PTR handling, allowing both v4 and v6 entries.
* udm_dns_record: [doc] add changelog fragment
* udm_dns_record: [fix] validation errors
* udm_dns_record: import ipaddress module conditionally (#3244)
* udm_dns_record: fix sanity check error, improve doc (#3244)
* udm_dns_record: Improve changes to meet community standards (#3244)
* snap - improved error handling
* added changelog fragment
* removed experiments left overs
* rolled back the smaller list of params for commands other than install
