* Proxmox inventory plugin - Fix string to dict conversion (#4348)
* Re-use the (defined but unused) `plaintext_configs` variable to list
configuration entries that should be ignored by the string to
dictionary conversion code. At this point, it only contains the
`description` string.
* Convert to a dictionary if the all substrings obtained by splitting
off the initial value with commas contain a `=` character
* Limit substring splitting to a single split, so that a substring
containing `a=b=c` will generate an `a` entry with value `b=c`.
* Added changelog fragment for PR #4349
* Fix changelog fragment for #4349
(cherry picked from commit 3eec63421a)
Co-authored-by: Emmanuel Benoît <tseeker@nocternity.net>
* Proxmox inventory plugin - Initial implementation of filters
* This is an attempt at implementing something that would satisfy
issue #3553
* A rather massive code rewrite was needed as adding the host to the
inventory, setting its variables and adding it to various groups
used to be done as soon as the information became available. This is
not possible when it is not known whether the host should be added
to the inventory before all data has been gathered.
* The code for both LXC containers and Qemu VMs was refactored into a
single loop.
* Helper functions to generate group and fact names were added.
* Proxmox inventory plugin - Warnings for filter errors
* When an error occurs while compositing a filter's value and strict
mode is disabled, display a warning.
* Proxmox inventory plugin - Fixed pool groups building
* Hosts that were excluded by the host filters were still being added
to pool groups, causing errors.
* Proxmox inventory plugin - Refactoring
* Split off the VM/container handling code from the
`_populate()` method
* Split off pool group attribution from the `_populate()` method
* Proxmox inventory filters - Changelog fragment
* proxmox inventory - Simplify _can_add_host() method
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
(cherry picked from commit 761171b532)
Co-authored-by: Emmanuel Benoît <tseeker@nocternity.net>
* ldap_entry - Recursive deletion
* Recursive deletion can be enabled with the `recursive` option. It is
disabled by default.
* When enabled, deletion is attempted by sending a single delete
request with the Subtree Delete control. If that request fails with
the `NOT_ALLOWED_ON_NONLEAF` error, try deleting the whole branch in
reverse order using individual delete requests.
* ldap_entry recursive deletion - Changelog fragment
* ldap_entry - Refactored to avoid lint message
* Update changelogs/fragments/4355-ldap-recursive-delete.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* ldap_entry - Add version_added to the recursive flag
Co-authored-by: Felix Fontein <felix@fontein.de>
* ldap_entry - Moved member assignment to a more suitable location
Co-authored-by: Felix Fontein <felix@fontein.de>
(cherry picked from commit 0b71d123d2)
Co-authored-by: Emmanuel Benoît <tseeker@nocternity.net>
* Implement change detection for update_cache=true. Add cache_updated return value.
* ...
* Make sure pacman --sync --list is called only as often as necessary.
(cherry picked from commit cf4d68ac50)
Co-authored-by: Felix Fontein <felix@fontein.de>
* Fix linode inventory filtering
There was a regression introduced in the addition of caching. The
`_consume_options` method was added and provided the `config_data`
dictionary. This `pop`s every entry, resulting in an empty `config_data`
dict, which was then reused and expected to be populated.
After reviewing, `_consume_data` doesn't need to be called. Also, once
the ``_read_config_data` method has been called, we no longer need the
config_data dict, and can instead use the `get_option` method throughout.
Once those were removed, the filtering function seemed a bit odd, since
we were no longer using the file. I used that opportunity to move the
filter calls into the populate function directly.
* Remove tests that target removed methods
This removes tests that targeted some custom methods on configuration
file handling. These are no longer necessary since they are now handled
by the BaseInventoryPlugin `_read_config_data` method.
* Add changelog entry for linode inventory bugfix
* Revert filters back to their own method
This moves filters back into their own method, but now uses the
get_option calls to pull filter configuration items.
(cherry picked from commit 386bb4bdd5)
Co-authored-by: steven jacobs <stjacobs@fastmail.fm>
* jira: Use fields in comment to merge in additional data
* changlog fragment added
* Update changelogs/fragments/4304-jira-fields-in-comment.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* updated fields documentation
* Update plugins/modules/web_infrastructure/jira.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
(cherry picked from commit 4fbba96841)
Co-authored-by: Boosai <51994151+Boosai@users.noreply.github.com>
* Add tls parameter to redis module
* Rename changelog fragment to match PR
* Apply suggestions from code review
Co-authored-by: Felix Fontein <felix@fontein.de>
* Port redis module to redis auth module util
* Update changelogs/fragments/4207-add-redis-tls-support.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/database/misc/redis.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Undo reuse of redis auth doc fragment
* Use doc fragment.
Co-authored-by: Julian Faude <julian.faude@zweiacht.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
(cherry picked from commit 9a74ace1e4)
Co-authored-by: jcharlytown <github@julianfau.de>
* npm - add '--production` support to 'npm ci' flag
* add changelog fragement for 4299
* Add backticks
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
(cherry picked from commit 43af053d73)
Co-authored-by: Daniel Miller <watermelonpizza@melonstudios.net>
* pacman: add support for remove_nosave
New parameter: remove_nosave
When enabled, will pass --nosave to pacman when removing packages.
--nosave cannot be used with --print-format and thus it couldn't be
passed via extra_args. See #4315
The code adds the option right before the actual removal of the pkgs.
(This is based on an initial diff from MorphBonehunter)
* changelog
* Update plugins/modules/packaging/os/pacman.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* wording
* ssss
* remove_package: simplify {force,extra,nosave}_args
Co-authored-by: Felix Fontein <felix@fontein.de>
(cherry picked from commit c698ecd201)
Co-authored-by: Jean Raby <jean@raby.sh>
* pacman: don't always return changed w/ update_cache
This used to be the behavior before the recent refactoring. [1]
Allows the following to return changed only when packages were upgraded:
- pacman:
update_cache: yes
upgrade: yes
And the following to return changed only when the foo package wasn't at
the latest version:
- pacman:
name: foo
state: latest
update_cache: yes
[1] https://github.com/ansible-collections/community.general/pull/3907
* Update changelogs/fragments/4318-pacman-restore-old-changed-behavior.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
(cherry picked from commit cc8151f209)
Co-authored-by: Evangelos Foutras <evangelos@foutrelis.com>
* Remove nmcli modify dependency on type parameter
* Add fragment
* Add newline for lint
* Fixed linting for tests
* Fix fragment
* Move aliases to ip_conn_type function
* Remove connection_map
* Updated fragment
* Fixed fragment
Co-authored-by: Trey West <--local>
(cherry picked from commit 1ca7894d30)
Co-authored-by: Trey West <treywest45th@gmail.com>
* s/group/groups/
Pacman accepts --group but the actual option name is --groups.
Allows use of other binaries with the same CLI interface as pacman (yay)
* changelog
* Apply suggestions from code review
Co-authored-by: Felix Fontein <felix@fontein.de>
* Add note regarding pacman compat + --print-format
* Update plugins/modules/packaging/os/pacman.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
(cherry picked from commit d4e92fc720)
Co-authored-by: Jean Raby <jean@raby.sh>
* Fix error when checking if VM exists.
* Add changelog entry.
* Reword changelog entry.
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
(cherry picked from commit 36ddb9b8e5)
Co-authored-by: Markus Reiter <me@reitermark.us>
* pipx: added options editable and pip_args
* added changelog fragment
* added version markers on new options
(cherry picked from commit f988eb5726)
Co-authored-by: Alexei Znamensky <103110+russoz@users.noreply.github.com>
* pacman: re-adding support for URL based pkgs
* Update plugins/modules/packaging/os/pacman.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/packaging/os/pacman.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* cmd=cmd in every call to self.fail()
* pacman: integration test for mixed pkg sources
* Add more tests + fix minor bug with URL packages
Version checking for URL packages is left to pacman, so add a check
after the dry run to see if it would actually install anything.
* remove double templating
Co-authored-by: Felix Fontein <felix@fontein.de>
(cherry picked from commit a9db4742fc)
Co-authored-by: Jean Raby <jean@raby.sh>
* zypper: support automatic removal of orphaned dependencies
* zypper: support automatic removal of orphaned dependencies
- Add support for --clean-deps option during package removal, which
will clean up packages that were only installed as dependencies
of the package being removed.
* Update changelogs/fragments/4192-zypper-add-clean-deps.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/packaging/os/zypper.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/packaging/os/zypper.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
(cherry picked from commit 9a34e97702)
Co-authored-by: Jeff Mahoney <jeffm@jeffm.io>
* fix sparse file creation on Alpine linux
* re-enable tests for Alpine
* remove `conv=sparse` flag (rely only on `seek=fullsize` & `count=0`)
* doc: add a reference to busybox's dd
* doc: remove restrictions for OpenBSD, Solaris & AIX (should work as
for Alpine linux now)
* add a changelog fragment
* fix typo
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
(cherry picked from commit 0da8cb2e02)
Co-authored-by: quidame <quidame@poivron.org>
* s/sys-upgrade/sysupgrade/
* changelog fragment
* yamllint
* more fragment tweaks
(cherry picked from commit b9f62bb4ef)
Co-authored-by: Jean Raby <jean@raby.sh>
* keycloak: fix creating a user federation w/ idempotent id
Creating a user federation while specifying an id (that doesn't exist
yet) will fail with a 404. This commits fix this behavior.
* keycloak: fix user federation mapper duplication
This commit fixes a bug where mappers are duplicated instead of
configured when creating a user federation.
When creating a user federation, some mappers are autogenerated by
keycloak. This commit lets the keycloak_user_federation module recompute
mappers final values after the user federation is created so that the
module can try to merge them by their name.
* add missing fragment for pr #4212
(cherry picked from commit c1485b885d)
Co-authored-by: Jules Lamur <jlamur@users.noreply.github.com>
* passwordstore: Add configurable locking
Passwordstore cannot be accessed safely in parallel, which causes
various issues:
- When accessing the same path, multiple different secrets are
returned when the secret didn't exist (missing=create).
- When accessing the same _or different_ paths, multiple pinentry
dialogs will be spawned by gpg-agent sequentially, having to enter
the password for the same gpg key multiple times in a row.
- Due to issues in gpg dependencies, accessing gpg-agent in parallel
is not reliable, causing plays to fail (this can be fixed by adding
`auto-expand-secmem` to _~/.gnupg/gpg-agent.conf_ though).
These problems have been described in various github issues in the past,
e.g., ansible/ansible#23816 and ansible/ansible#27277.
This cannot be worked around in playbooks by users in a non-error-prone
way.
It is addressed by adding new configuration options:
- lock:
- readwrite: Lock all operations
- write: Only lock write operations (default)
- none: Disable locking
- locktimeout: Time to wait for getting a lock (s/m/h suffix)
(defaults to 15m)
These options can also be set in ansible.cfg, e.g.:
[passwordstore_lookup]
lock=readwrite
locktimeout=30s
Also, add a note about modifying gpg-agent.conf.
* Tidy up locking config
There is no reason why lock configuration should be part of self.paramvals.
Now locking and its configuration happen all in one place.
* Change timeout description wording to the suggested value.
* Rearrange plugin setup, apply PR feedback
(cherry picked from commit 2416b81aa4)
Co-authored-by: grembo <freebsd@grem.de>
* pmem: Add namespace and namespace_append options
- namespace: Configure the namespace of PMem. PMem should be configured
by appdirect/memmode, or socket option in advance.
- namespace_append: Enables to append the new namespaces.
* Add changelog fragment entry
* Update the changelog fragment
* Update changelog fragment entry
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update to use human_to_bytes
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update to fix the description of namespace_append
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update to release v4.5.0
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update to fix the typo in the description of namespace_append
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
(cherry picked from commit 5841935e37)
Co-authored-by: mizumm <26898888+mizumm@users.noreply.github.com>
* yum_versionlock: Fix entry matching (#4183)
As an input the module receives names of packages to lock.
Those never matched existing entries and therefore always reported
changes.
For compatibility yum is symlinked to dnf on newer systems,
but versionlock entries defer. Try to parse both formats.
Signed-off-by: Florian Achleitner <flo@fopen.at>
(cherry picked from commit f5ec73735f)
* Empty commit to trigger CI.
Co-authored-by: fachleitner <flo@fopen.at>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Rework of gitlab_project_variable over gitlab_group_variable
* Linting and removed unused example
* Fix test 2
* Sync from review of gitlab_project_variable #4038
* Linting, default protected True, value optional
* Next version is 4.5.0
* Roll back protected default true, and value not required
* Apply suggestions from code review
Missing check_mode
Co-authored-by: Markus Bergholz <git@osuv.de>
* Fix one unit test, comment test that requires premium gitlab
* Add changelog
* Update plugins/modules/source_control/gitlab/gitlab_group_variable.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update changelogs/fragments/4086-rework_of_gitlab_proyect_variable_over_gitlab_group_variable.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* Added conditional gitlab_premium_tests variable when required
* Allow delete without value
* Fix variable name
* Linting
* Value should not be required in doc
* Linting missing new-line
* Update changelogs/fragments/4086-rework_of_gitlab_proyect_variable_over_gitlab_group_variable.yml
Co-authored-by: Markus Bergholz <git@osuv.de>
Co-authored-by: Markus Bergholz <git@osuv.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
(cherry picked from commit 44f9bf545d)
Co-authored-by: Sebastian Guarino <sebastian.guarino@gmail.com>
The passwordstore lookup plugin depends on parsing GnuPG's
error messages in English language. As a result, detection of
a specific error failes when users set a different locale.
This change corrects this by setting the `LANGUAGE` environment
variable to `C` when invoking `pass`, as this only affects
gettext translations.
See
https://www.gnu.org/software/gettext/manual/html_node/The-LANGUAGE-variable.html
(cherry picked from commit 77a0c139c9)
Co-authored-by: grembo <freebsd@grem.de>
Given a password stored in _path/to/secret_, requesting the password
_path/to_ will literally return `path/to`. This can lead to using
weak passwords by accident/mess up logic in code, based on the
state of the password store.
This is worked around by applying the same logic `pass` uses:
If a password was returned, check if there is a .gpg file it could
have come from. If not, treat it as missing.
Fixesansible-collections/community.general#4185
(cherry picked from commit da49c0968d)
Co-authored-by: grembo <freebsd@grem.de>
* Included efidisk0 option to be able to create VMs with persitent EFI disks
* Added forgotten argument to create_vm invocation and missing test for update
* Added changelog fragment relevant to PR
* Fixed documentation issues (missing period, and added version) from review
* Removed breaking change dependency for new option, modified changelog fragment according to review
* Fixed typo in documentation
* Added examples of `efidisk0` usage
* Added examples of `efidisk0` usage
* Fixed lines containing blank spaces
* Rebased on 4.4.0, added efi option, added sanity checks on efi option
* Adjusted version_added to 4.5.0
* Corrected typo in create_vm invocation, adjusted merging of efi and efidisk0 options
* Updated efidosk0 option to dict, added flattening to str, added constraint on bios option if efidisk0 is set
* Replaced loop by list comprehension for efidisk0 flattening
* Removed unused code left over from refactor from efi/efidis0 options
(cherry picked from commit 988cc82a89)
Co-authored-by: thuttinpasseron <87776406+thuttinpasseron@users.noreply.github.com>
* Add new module: pmem
This commit introduces to pmem module to configure Intel Optane
Persistent Memory modules (PMem).
* Add botmeta
* Update plugins/modules/storage/pmem/pmem.py
* Convert to snake_case options
* Update related to xmltodict
* Update to use list instead of string
* Update to use single quote to the string
* Update plugins/modules/storage/pmem/pmem.py
(cherry picked from commit 7f793c83f1)
Co-authored-by: mizumm <26898888+mizumm@users.noreply.github.com>
* Updated keycloak.py to allow defining connection timeout value (#4168) (#2)
* Added parameter to doc_fragments and edited the changelog message (#4168)
* Added parameter to doc_fragments and edited the changelog message (#4168)
(cherry picked from commit 2498591695)
Co-authored-by: Nikolas Laskaris <laskarisn@gmail.com>
* begin add private network
* scaleway_private_network , basic add and remove ok, work in progress
* scaleway_private_network : add search in next page
* scalewy_private_network add tags
* scaleway_private_network fix correct return value for register
* scaleway_privat_network change some text
* fix some sanity
* fix line too long
* fix line too long SCALEWAY_LOCATION
* some change for sanity
* fix sanity again
* add author in BOTMETA
* fix error in name in fike BOTMETA
* Update plugins/modules/cloud/scaleway/scaleway_private_network.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/cloud/scaleway/scaleway_private_network.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/cloud/scaleway/scaleway_private_network.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/cloud/scaleway/scaleway_private_network.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/cloud/scaleway/scaleway_private_network.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/cloud/scaleway/scaleway_private_network.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/cloud/scaleway/scaleway_private_network.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/cloud/scaleway/scaleway_private_network.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/cloud/scaleway/scaleway_private_network.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* add test for scaleway_private_network
* Update plugins/modules/cloud/scaleway/scaleway_private_network.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/cloud/scaleway/scaleway_private_network.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/cloud/scaleway/scaleway_private_network.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/cloud/scaleway/scaleway_private_network.py
Co-authored-by: Felix Fontein <felix@fontein.de>
(cherry picked from commit 54b29208a2)
Co-authored-by: pastral <52627592+pastral@users.noreply.github.com>
* opentelemetry: enrich services for jenkins, hetzner, jira, zypper, chocolatey
* remove source and name for the time being
Those arguments can be later on in the future added, maybe with some opt-in feature, so let's only focus in the ones which are fully http based for now
* changelog fragment
* Update changelogs/fragments/4105-opentelemetry_plugin-enrich_jira_hetzner_jenkins_services.yaml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
(cherry picked from commit aa554c2887)
Co-authored-by: Victor Martinez <victormartinezrubio@gmail.com>
* Updated storage format documentation to point to PVE docs to show possible values
* Fixed trailing space
(cherry picked from commit 14b8cd9c64)
Co-authored-by: thuttinpasseron <87776406+thuttinpasseron@users.noreply.github.com>
* dconf: Skip processes that disappeared while we inspected them
Fixes#4151
* Update changelogs/fragments/4151-dconf-catch-psutil-nosuchprocess.yaml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
(cherry picked from commit 9567c99c9f)
Co-authored-by: Pavol Babinčák <scroolik@gmail.com>
* pacman: rewrite with a cache to speed up execution
- Use a cache (or inventory) to speed up lookups of:
- installed packages and groups
- available packages and groups
- upgradable packages
- Call pacman with the list of pkgs instead of one call per package (for
installations, upgrades and removals)
- Use pacman [--sync|--upgrade] --print-format [...] to gather list of
changes. Parsing that instead of the regular output of pacman, which
is error prone and can be changed by user configuration.
This can introduce a TOCTOU problem but unless something else calls
pacman between the invocations, it shouldn't be a concern.
- Given the above, "check mode" code is within the function that would
carry out the actual operation. This should make it harder for the
check code and the "real code" to diverge.
- Support for specifying alternate package name formats is a bit more
robust. pacman is used to extract the name of the package when the
specified package is a file or a URL.
The "<repo>/<pkgname>" format is also supported.
For "state: latest" with a list of ~35 pkgs, this module is about 5
times faster than the original.
* Let fail() actually work
* all unhappy paths now end up calling fail()
* Update copyright
* Argument changes
update_cache_extra_args handled as a list like the others
moved the module setup to its own function for easier testing
update and upgrade have no defaults (None) to let required_one_of() do
its job properly
* update_cache exit path
Shift successful exit without name or upgrade under "update_cache".
It is an error if name or upgrade isn't specified and update_cache wasn't specified
either. (Caught by ansiblemodule required_one_of but still)
* Add pkgs to output on success only
Also align both format, only pkg name for now
* Multiple fixes
Move VersionTuple to top level for import from tests
Add removed pkgs to the exit json when removing packages
fixup list of upgraded pkgs reported on upgrades (was tuple of list for
no reason)
use list idiom for upgrades, like the rest
drop unused expand_package_groups function
skip empty lines when building inventory
* pacman: add tests
* python 2.x compat + pep8
* python 2.x some more
* Fix failure when pacman emits warnings
Add tests covering that failure case
* typo
* Whitespace
black failed me...
* Adjust documentation to fit implicit defaults
* fix test failures on older pythons
* remove file not intended for commit
* Test exception str with e.match
* Build inventory after cache update + adjust tests
* Apply suggestions from code review
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/packaging/os/pacman.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* changelog
* bump copyright year and add my name to authors
* Update changelogs/fragments/3907-pacman-speedup.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* maintainer entry
Co-authored-by: Felix Fontein <felix@fontein.de>
(cherry picked from commit 1580f3c2b4)
Co-authored-by: Jean Raby <jean@raby.sh>
