* redfish_command: documentation language and formatting
Update the documentation block with more English language
more consistent with other modules and finish each description
with a full stop.
* redfish_command: do not end short desc in full stop
* redfish_command: remove more "the" on documentation
Remove "The" from beginning of descriptions.
* redfish_command: start documentation description with capital case
* redfish_config: update documentation language and format
Add full stops at end of descriptions, small updates to language,
ensure descriptions start with a capital case letter.
* redfish_config: documentation consistency
Use "username" for description similarly to redfish_command.
* redfish_info: documentation formatting and language
Update documentation block for consistency with other modules
with full stop at end of descriptions and small language updates.
* idrac_redfish_command: documentation formatting and language
Update documentation block for consistency with other modules
with full stop at end of descriptions and small language updates.
* idrac_redfish_command: more doc consistency fixes
Call it iDRAC everywhere and not sometimes OOB controller.
* idrac_redfish_command: documentation formatting and language
Update documentation block for consistency with other modules
with full stop at end of descriptions and small language updates.
* idrac_redfish_info: documentation formatting and language
Update documentation block for consistency with other modules
with full stop at end of descriptions and small language updates.
* ilo_redfish_config: documentation formatting and language
Update documentation block for consistency with other modules
with full stop at end of descriptions and small language updates.
* ilo_redfish_info: documentation formatting and language
Update documentation block for consistency with other modules
with full stop at end of descriptions and small language updates.
* idrac_redfish_info: documentation language
Call it "HTTP request" and not "URL request".
* idrac_redfish_command: documentation language fix
Call it "HTTP request" and not "URL request".
* idrac_redfish_config: documentation language fix
Call it "HTTP request" and not "URL request".
* redfish_command: documentation language fix
Call it "HTTP request" and not "URL request".
* redfish_config: documentation language fix
Call it "HTTP request" and not "URL request".
* redfish_info: documentation language fix
Call it "HTTP request" and not "URL request".
* redfish_command: documentation language fix
Boot device should be two words.
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Remove support for the DLV record as the registry was decomissioned
The DLV registry was decomissioned in 2017 (https://www.isc.org/blogs/dlv/) so it's high time we remove support for DLV records.
* Remove DLV deprecation.
Co-authored-by: Felix Fontein <felix@fontein.de>
* Multiple modules using ModuleHelper
Replaced raising exception with calling method do_raise() in MH.
Removed the importing of the exception class.
* added changelog fragment
* Add RHEL 9.0 and FreeBSD 13.1 to CI.
* RHEL 9 has no pyOpenSSL apparently.
* Adjust URL for EPEL.
* Fix cargo install on FreeBSD 13.1.
* Add Ubuntu 22.04 and Fedora 36 to CI.
* Fix logic.
* filesystem: do not die output line does not contain ':'
* Skip django_manage tests on RHEL 9 as well.
* homectl tests don't work with RHEL 9.0.
* Improve error handling, improve fatresize output handling.
* Skip Fedora 36.
* Skip filesystem vfat tests on Ubuntu 22.04.
There, resizing fails with a bug:
Bug: Assertion (disk != NULL) at ../../libparted/disk.c:1620 in function ped_disk_get_partition_by_sector() failed.
* 'trusty' is 14.04. Adding 22.04 to skip list.
* Skip jail tests for FreeBSD 13.1.
* Add config for postgres on Ubuntu 22.04.
* Make CentOS 6 happy.
* Adjust postgres version.
* Try installing EPEL a bit differently.
* Skip ufw and iso_extract tests on RHEL 9.
* Skip odbc tests on RHEL 9.
* Skip RHEL 9.0 for snap tests.
* Add changelog fragment for filesystem code changes.
* Update lenovoxcc module for compatibility due to redfish spec changes the virtualMedia resource location from Managers to Systems
* Add changelogs fragment for PR 4682
* Update changelogs/fragments/4682-compatibility-virtualmedia-resource-location.yaml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Tami YY3 Pan <panyy3@lenovo.com>
Co-authored-by: Felix Fontein <felix@fontein.de>
* gitlab_hook: use empty string for non-existent attr in gitlab API response;
* gitlab_hook: use None for non-existent attr in gitlab API response;
* gitlab_hook: use None for non-existent attr in gitlab API response - add changelog fragment;
* gitlab_hook: update changelog fragment for #4668
* Update changelogs/fragments/4668-gitlab_hook-use-None-for-non-existent-attr.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* Remove unsupported and unnecessary --no-emoji option
`--no-emoji` causes errors in Yarn 2+ and should be unnecessary in Yarn 1.x; Yarn 1.x should only use emoji on supported interactive terminals.
* Add changelog fragment
* Update changelogs/fragments/4662-yarn-emoji.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update changelogs/fragments/4662-yarn-emoji.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Set firstrun to avoid use before definition
At the moment if zypper updates itself the parse_zypper_xml function
calls itself with packages not None, but in check_mode zypper still
needs to update itself -> rc = 103 and firstrun is undefined
* Add changelog frament
* Update changelogs/fragments/4651-zypper-checkmode-fix.yaml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Georg Vogt <georg.vogt@tngtech.com>
Co-authored-by: Felix Fontein <felix@fontein.de>
* ModuleHelper: added a do_raise() method to MH base class
* added changelog fragment
* Update changelogs/fragments/4660-mh-added-do-raise.yaml
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/module_utils/mh/base.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* using do_raise in CmdMixin
* simplified do_raise()
Co-authored-by: Felix Fontein <felix@fontein.de>
* rax_files_objects: refactoring
- simplifications
- use of comprehensions
- better use of exceptions
- improvements on the documentation blob
- src and dest mutually exclusive in module definition
* added changelog fragment
* Update plugins/modules/cloud/rackspace/rax_files_objects.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* rollback of mutually_exclusive
Co-authored-by: Felix Fontein <felix@fontein.de>
* Get first found configuration file
There are three valid places to get the configuration.
https://developer.1password.com/docs/cli/about-biometric-unlock#remove-old-account-information
* Use common config class
* Add changelog fragment
* Explicitly use new style classes for Python 2.7 compatibility
This shouldn’t matter for lookups, but does matter for module_utils
and modules since Python 2.7 is still supported on the managed node.
* Update changelogs/fragments/4065-onepassword-config.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* ModuleHelper module util: delegates unknown attributes to AnsibleModule
* added changelog fragment
* delegate only a few selected attrs
* Update plugins/module_utils/mh/base.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update changelogs/fragments/4600-mh-delegate.yaml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* change list.copy() with list[:] for py2 compat in terraform module
* add changelog fragment
* Update changelogs/fragments/4621-terraform-py2-compat.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Inserted not supported in patch on some hardware
Signed-off-by: Adam Robinson <adarobin@umich.edu>
* return error for ilo4 options with no defaults
* Update changelog
Co-authored-by: Felix Fontein <felix@fontein.de>
* make virtual_media_insert_via_patch backwards compatible
Co-authored-by: Felix Fontein <felix@fontein.de>
* remove ilo 4 specific properties check
* return ExtendedInfo as a string if no Message
* only worry about Inserted and WriteProtected
* update changelog
* fix for PEP8
* fix up comments
* fix VirtualMediaEject for iLO4 as well
* update changlog
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Add docs for ansible-core 2.13 use
local testing shows fine, adding here as example for other filters/tests
* Update plugins/filter/random_mac.py
* Improve docs.
* Remove wrong 'positional'.
Co-authored-by: Felix Fontein <felix@fontein.de>
* Add 'activate' parameter for alternatives
Allow alternatives to be installed without being set as the current
selection.
* add changelog fragment
* Apply suggestions from code review
Co-authored-by: Felix Fontein <felix@fontein.de>
* rename 'activate' -> 'selected'
* rework 'selected' parameter -> 'state'
* handle unsetting of currently selected alternative
* add integration tests for 'state' parameter
* fix linting issues
* fix for Python 2.7 compatibility
* Remove alternatives file.
Co-authored-by: Felix Fontein <felix@fontein.de>
* Parse lxc key from api data for lxc containers
When configuring containers in the `/etc/pve/lxc/` file, the API
adds a 'lxc' key that caused the plugin to crash as it tried to
split a list on ','.
This commit introduces logic to convert the list of lists in the
returned data to a dict as with the other keys.
```
'lxc': [['lxc.apparmor.profile', 'unconfined'],
['lxc.cgroup.devices.allow', 'a']]
```
becomes
```
"proxmox_lxc": {
"apparmor.profile": "unconfined",
"cap.drop": "",
"cgroup.devices.allow": "a"
}
```
* Add changelog fragment
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Philippe Pepos Petitclerc <peposp@gmail.com>
Co-authored-by: Felix Fontein <felix@fontein.de>
* initial commit, passing unit tests
* passing one very silly integration test
* multiple changes:
- updated copyright year
- cmd_runner
- added fmt_optval
- created specific exceptions
- fixed bug in context class where values from module params were not
being used for resolving cmd arguments
- changed order of class declaration for readability purpose
- tests
- minor improvements in integration test code
- removed some extraneous code in msimple.yml
- minor improvements in unit tests
- added few missing cases to unit test
* multiple changes
cmd_runner.py
- renamed InvalidParameterName to MissingArgumentFormat
- improved exception parameters
- added repr and str to all exceptions
- added unpacking decorator for fmt functions
- CmdRunner
- improved parameter validation
- _CmdRunnerContext
- Context runs must now pass named arguments
- Simplified passing of additional arguments to module.run_command()
- Provided multiple context variables with info about the run
Integration tests
- rename msimple.py to cmd_echo.py for clarity
- added more test cases
* cmd_runner: env update can be passed to runner
* adding runner context info to output
* added comment on OrderedDict
* wrong variable
* refactored all fmt functions into static methods of a class
Imports should be simpler now, only one object fmt, with attr access to all callables
* added unit tests for CmdRunner
* fixed sanity checks
* fixed mock imports
* added more unit tests for CmdRunner
* terminology consistency
* multiple adjustments:
- remove extraneous imports
- renamed some variables
- added wrapper around arg formatters to handle individual arg ignore_none behaviour
* removed old code commented out in test
* multiple changes:
- ensure fmt functions return list of strings
- renamed fmt parameter from `option` to `args`
- renamed fmt.mapped to fmt.as_map
- simplified fmt.as_map
- added tests for fmt.as_fixed
* more improvements in formats
* fixed sanity
* args_order can be a string (to be split())
and improved integration test
* simplified integration test
* removed overkill str() on values - run_command does that for us
* as_list makes more sense than as_str in that context
* added changelog fragment
* Update plugins/module_utils/cmd_runner.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* adjusted __repr__ output for the exceptions
* added superclass object to classes
* added additional comment on the testcase sample/example
* suggestion from PR
Co-authored-by: Felix Fontein <felix@fontein.de>
* Allow restoring of snapshots
* Fix formatting
* Add documentation for new feature
* Revert unrelated reformatting
* Add documentation for snapshot change
* Remove redundant multiple call to status API
* Remove unneccesary indent
* Add documentation for timeout fix
* Update changelog fragment to reflect real changes
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update changelog fragment to reflect real changes
Co-authored-by: Felix Fontein <felix@fontein.de>
* Add Tests for Snapshot rollback
* Update tests/unit/plugins/modules/cloud/misc/test_proxmox_snap.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update changelogs/fragments/4377-allow-proxmox-snapshot-restoring.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/cloud/misc/proxmox_snap.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* nmcli: Deprecate default hairpin mode
Deprecate the default hairpin mode for a bridge.
Plain nmcli/bridge tools defaults to no, but for some reason ansible
defaults to yes.
We deprecate the default value so we can switch to default 'no' in
ansible 6.0.0
* Code review fixes
Co-authored-by: Felix Fontein <felix@fontein.de>
* Fix comments
* Update changelogs/fragments/4320-nmcli-hairpin.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update changelogs/fragments/4320-nmcli-hairpin.yml
Co-authored-by: Alexei Znamensky <103110+russoz@users.noreply.github.com>
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Alexei Znamensky <103110+russoz@users.noreply.github.com>
* Implement contructable support for opennebula inventory plugin: keyed_groups, compose, groups
* Fixed templating mock issues in unit tests, corrected some linting errors
* trying to make the linter happy
* Now trying to make python2.7 happy
* Added changelog fragment
* changelog fragment needs pluralization
* Update changelogs/fragments/4524-update-opennebula-inventory-plugin-to-match-documentation.yaml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* pacman: Fix removing locally installed packages
Without this, using `absent` state for a locally installed package (for example from AUR, or from a package that was dropped from repositories) would return that package is already removed, despite remaining installed
* Undo unwanted whitespace removal
* Add changelog fragment
* Update changelogs/fragments/4464-pacman-fix-local-remove.yaml
Co-authored-by: Felix Fontein <felix@fontein.de>
* Add test.
Co-authored-by: Felix Fontein <felix@fontein.de>
If `all=True` is not set then by default only 20 records will be
returned when calling `list()`. Use `all=True` so that all records
will be returned.
For the `list()` use where do not desire to retrieve all entries then
use`all=False` to show explicityly that we don't want to get all of
the entries.
Fixes: #3729Fixes: #4460
* Adds optional `-upgrade` flag to terraform init.
This allows Terraform to install provider dependencies into an existing project when the provider constraints change.
* fix transposed documentation keys
* Add integration tests for terraform init
* Revert to validate_certs: yes for general public testing
* skip integration tests on irrelevant platforms
* skip legacy Python versions from CI tests
* add changelog fragment
* Update plugins/modules/cloud/misc/terraform.py
Adds version_added metadata to the new module option.
Co-authored-by: Felix Fontein <felix@fontein.de>
* Change terraform_arch constant to Ansible fact mapping
* correct var typo, clarify task purpose
* Squashed some logic bugs, added override for local Terraform
If `existing_terraform_path` is provided, the playbook will not download Terraform or check its version.
I also tested this on a local system with Terraform installed, and squashed some bugs related to using of an
existing binary.
* revert to previous test behavior for TF install
* readability cleanup
* Update plugins/modules/cloud/misc/terraform.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Only get monitor if it is not null api response
* Add changelog fragment
* Update changelogs/fragments/4459-only-get-monitor-if-it-is-not-null-api-response.yaml
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/net_tools/dnsmadeeasy.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: drevai <revai.dominik@gravityrd.com>
Co-authored-by: Felix Fontein <felix@fontein.de>
* add support for datadog monitors of type event-v2
See https://docs.datadoghq.com/events/guides/migrating_to_new_events_features/
* add changelog fragement for PR
* typos
* add link to PR
* minor_fetaure, not bugfix
* add to description when we added event-v2 type
* Update changelogs/fragments/4457-support-datadog-monitors-type event-v2.yaml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Add error handling to check correct SDK version installed
* Fix CI errors
* Added changelog fragment
* Changed exeption type
* Update changelogs fragment
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* fixed issue with specified package versions
zypper.py was doing nothing on state=present, when ALL requestet/checked packages had a specific version stated. This was caused by get_installed_state() being called with an empty package list, which in this case returns information about all ALL installed packages. This lead to an exessive filter list prerun_state, essentially removing all packages that are installed in ANY version on the target system from the request list.
* Create 4421-zypper_package_version_handling_fix
added changelog fragment for https://github.com/ansible-collections/community.general/pull/4421
* Delete 4421-zypper_package_version_handling_fix
* Create 4421-zypper_package_version_handling_fix.yml
* added templating to the url, user, and password
* added changelog fragment
* typo in description for url, and password
* clarify in the changelog what can you change
* update documentation and added an example
* missing quote from examples
* Apply suggestions from code review
Changed to I for option names
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/inventory/proxmox.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* fix: missing `validate_certs` parameters for `open_url` calls
As stated in the documentation, the `validate_certs` parameter can be
used to verify (or not) the TLS certificates. But, for some modules (at
least for the `keycloak_authentication` module), this parameter is not
used with the `open_url` function.
* add changelog fragment
* Update changelogs/fragments/4382-keycloak-add-missing-validate_certs-parameters.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Laurent Meunier <lme@atolcd.com>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Proxmox inventory plugin - Fix tags parsing
* In some cases the Proxmox API returns a tags string that consists in
a single space. The Proxmox inventory plugin parsed that into a
single, empty tag. Stripping the initial string then checking
whether it actually contains something fixes that.
* Do not call `_to_safe` on the concatenation of a known safe string
and a string that was already made safe.
* Changelog fragment for Proxmox inventory plugin tags fix
* Proxmox inventory plugin - Include link to PR in fragment
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* feat: sudoers module supports runas parameter with default of root
* fix: sudoers tests now pass
* chore: add changelog fragment for 4380
* fix: runas feature now a non-breaking change wh no def with no default
* fix: no trailing space in sudoers.py
* Update plugins/modules/system/sudoers.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* plugins/inventory/lxd.py: fix listing of containers without os / release
In some cases, a container might be present, that was initialized empty, therefore lacking meta information about the os or the release.
Test if the data entry is None to avoid calling lower on it.
* Update plugins/inventory/lxd.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/inventory/lxd.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Create 4351-inventory-lxd-handling_metadata_wo_os_and_release.yml
* fix yaml readability of changelog fragment
* Update changelogs/fragments/4351-inventory-lxd-handling_metadata_wo_os_and_release.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Malte Kuhn <mkuhn@maxcluster.de>
* Proxmox inventory plugin - Fix string to dict conversion (#4348)
* Re-use the (defined but unused) `plaintext_configs` variable to list
configuration entries that should be ignored by the string to
dictionary conversion code. At this point, it only contains the
`description` string.
* Convert to a dictionary if the all substrings obtained by splitting
off the initial value with commas contain a `=` character
* Limit substring splitting to a single split, so that a substring
containing `a=b=c` will generate an `a` entry with value `b=c`.
* Added changelog fragment for PR #4349
* Fix changelog fragment for #4349
* Proxmox inventory plugin - Initial implementation of filters
* This is an attempt at implementing something that would satisfy
issue #3553
* A rather massive code rewrite was needed as adding the host to the
inventory, setting its variables and adding it to various groups
used to be done as soon as the information became available. This is
not possible when it is not known whether the host should be added
to the inventory before all data has been gathered.
* The code for both LXC containers and Qemu VMs was refactored into a
single loop.
* Helper functions to generate group and fact names were added.
* Proxmox inventory plugin - Warnings for filter errors
* When an error occurs while compositing a filter's value and strict
mode is disabled, display a warning.
* Proxmox inventory plugin - Fixed pool groups building
* Hosts that were excluded by the host filters were still being added
to pool groups, causing errors.
* Proxmox inventory plugin - Refactoring
* Split off the VM/container handling code from the
`_populate()` method
* Split off pool group attribution from the `_populate()` method
* Proxmox inventory filters - Changelog fragment
* proxmox inventory - Simplify _can_add_host() method
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* ldap_entry - Recursive deletion
* Recursive deletion can be enabled with the `recursive` option. It is
disabled by default.
* When enabled, deletion is attempted by sending a single delete
request with the Subtree Delete control. If that request fails with
the `NOT_ALLOWED_ON_NONLEAF` error, try deleting the whole branch in
reverse order using individual delete requests.
* ldap_entry recursive deletion - Changelog fragment
* ldap_entry - Refactored to avoid lint message
* Update changelogs/fragments/4355-ldap-recursive-delete.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* ldap_entry - Add version_added to the recursive flag
Co-authored-by: Felix Fontein <felix@fontein.de>
* ldap_entry - Moved member assignment to a more suitable location
Co-authored-by: Felix Fontein <felix@fontein.de>
* Implement change detection for update_cache=true. Add cache_updated return value.
* ...
* Make sure pacman --sync --list is called only as often as necessary.
* Fix linode inventory filtering
There was a regression introduced in the addition of caching. The
`_consume_options` method was added and provided the `config_data`
dictionary. This `pop`s every entry, resulting in an empty `config_data`
dict, which was then reused and expected to be populated.
After reviewing, `_consume_data` doesn't need to be called. Also, once
the ``_read_config_data` method has been called, we no longer need the
config_data dict, and can instead use the `get_option` method throughout.
Once those were removed, the filtering function seemed a bit odd, since
we were no longer using the file. I used that opportunity to move the
filter calls into the populate function directly.
* Remove tests that target removed methods
This removes tests that targeted some custom methods on configuration
file handling. These are no longer necessary since they are now handled
by the BaseInventoryPlugin `_read_config_data` method.
* Add changelog entry for linode inventory bugfix
* Revert filters back to their own method
This moves filters back into their own method, but now uses the
get_option calls to pull filter configuration items.
* jira: Use fields in comment to merge in additional data
* changlog fragment added
* Update changelogs/fragments/4304-jira-fields-in-comment.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* updated fields documentation
* Update plugins/modules/web_infrastructure/jira.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Add tls parameter to redis module
* Rename changelog fragment to match PR
* Apply suggestions from code review
Co-authored-by: Felix Fontein <felix@fontein.de>
* Port redis module to redis auth module util
* Update changelogs/fragments/4207-add-redis-tls-support.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/database/misc/redis.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Undo reuse of redis auth doc fragment
* Use doc fragment.
Co-authored-by: Julian Faude <julian.faude@zweiacht.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* npm - add '--production` support to 'npm ci' flag
* add changelog fragement for 4299
* Add backticks
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* pacman: add support for remove_nosave
New parameter: remove_nosave
When enabled, will pass --nosave to pacman when removing packages.
--nosave cannot be used with --print-format and thus it couldn't be
passed via extra_args. See #4315
The code adds the option right before the actual removal of the pkgs.
(This is based on an initial diff from MorphBonehunter)
* changelog
* Update plugins/modules/packaging/os/pacman.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* wording
* ssss
* remove_package: simplify {force,extra,nosave}_args
Co-authored-by: Felix Fontein <felix@fontein.de>
* pacman: don't always return changed w/ update_cache
This used to be the behavior before the recent refactoring. [1]
Allows the following to return changed only when packages were upgraded:
- pacman:
update_cache: yes
upgrade: yes
And the following to return changed only when the foo package wasn't at
the latest version:
- pacman:
name: foo
state: latest
update_cache: yes
[1] https://github.com/ansible-collections/community.general/pull/3907
* Update changelogs/fragments/4318-pacman-restore-old-changed-behavior.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Remove nmcli modify dependency on type parameter
* Add fragment
* Add newline for lint
* Fixed linting for tests
* Fix fragment
* Move aliases to ip_conn_type function
* Remove connection_map
* Updated fragment
* Fixed fragment
Co-authored-by: Trey West <--local>
* s/group/groups/
Pacman accepts --group but the actual option name is --groups.
Allows use of other binaries with the same CLI interface as pacman (yay)
* changelog
* Apply suggestions from code review
Co-authored-by: Felix Fontein <felix@fontein.de>
* Add note regarding pacman compat + --print-format
* Update plugins/modules/packaging/os/pacman.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Fix error when checking if VM exists.
* Add changelog entry.
* Reword changelog entry.
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* pacman: re-adding support for URL based pkgs
* Update plugins/modules/packaging/os/pacman.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/packaging/os/pacman.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* cmd=cmd in every call to self.fail()
* pacman: integration test for mixed pkg sources
* Add more tests + fix minor bug with URL packages
Version checking for URL packages is left to pacman, so add a check
after the dry run to see if it would actually install anything.
* remove double templating
Co-authored-by: Felix Fontein <felix@fontein.de>
* zypper: support automatic removal of orphaned dependencies
* zypper: support automatic removal of orphaned dependencies
- Add support for --clean-deps option during package removal, which
will clean up packages that were only installed as dependencies
of the package being removed.
* Update changelogs/fragments/4192-zypper-add-clean-deps.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/packaging/os/zypper.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/packaging/os/zypper.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* fix sparse file creation on Alpine linux
* re-enable tests for Alpine
* remove `conv=sparse` flag (rely only on `seek=fullsize` & `count=0`)
* doc: add a reference to busybox's dd
* doc: remove restrictions for OpenBSD, Solaris & AIX (should work as
for Alpine linux now)
* add a changelog fragment
* fix typo
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* keycloak: fix creating a user federation w/ idempotent id
Creating a user federation while specifying an id (that doesn't exist
yet) will fail with a 404. This commits fix this behavior.
* keycloak: fix user federation mapper duplication
This commit fixes a bug where mappers are duplicated instead of
configured when creating a user federation.
When creating a user federation, some mappers are autogenerated by
keycloak. This commit lets the keycloak_user_federation module recompute
mappers final values after the user federation is created so that the
module can try to merge them by their name.
* add missing fragment for pr #4212
* passwordstore: Add configurable locking
Passwordstore cannot be accessed safely in parallel, which causes
various issues:
- When accessing the same path, multiple different secrets are
returned when the secret didn't exist (missing=create).
- When accessing the same _or different_ paths, multiple pinentry
dialogs will be spawned by gpg-agent sequentially, having to enter
the password for the same gpg key multiple times in a row.
- Due to issues in gpg dependencies, accessing gpg-agent in parallel
is not reliable, causing plays to fail (this can be fixed by adding
`auto-expand-secmem` to _~/.gnupg/gpg-agent.conf_ though).
These problems have been described in various github issues in the past,
e.g., ansible/ansible#23816 and ansible/ansible#27277.
This cannot be worked around in playbooks by users in a non-error-prone
way.
It is addressed by adding new configuration options:
- lock:
- readwrite: Lock all operations
- write: Only lock write operations (default)
- none: Disable locking
- locktimeout: Time to wait for getting a lock (s/m/h suffix)
(defaults to 15m)
These options can also be set in ansible.cfg, e.g.:
[passwordstore_lookup]
lock=readwrite
locktimeout=30s
Also, add a note about modifying gpg-agent.conf.
* Tidy up locking config
There is no reason why lock configuration should be part of self.paramvals.
Now locking and its configuration happen all in one place.
* Change timeout description wording to the suggested value.
* Rearrange plugin setup, apply PR feedback
* pmem: Add namespace and namespace_append options
- namespace: Configure the namespace of PMem. PMem should be configured
by appdirect/memmode, or socket option in advance.
- namespace_append: Enables to append the new namespaces.
* Add changelog fragment entry
* Update the changelog fragment
* Update changelog fragment entry
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update to use human_to_bytes
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update to fix the description of namespace_append
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update to release v4.5.0
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update to fix the typo in the description of namespace_append
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
As an input the module receives names of packages to lock.
Those never matched existing entries and therefore always reported
changes.
For compatibility yum is symlinked to dnf on newer systems,
but versionlock entries defer. Try to parse both formats.
Signed-off-by: Florian Achleitner <flo@fopen.at>
* Rework of gitlab_project_variable over gitlab_group_variable
* Linting and removed unused example
* Fix test 2
* Sync from review of gitlab_project_variable #4038
* Linting, default protected True, value optional
* Next version is 4.5.0
* Roll back protected default true, and value not required
* Apply suggestions from code review
Missing check_mode
Co-authored-by: Markus Bergholz <git@osuv.de>
* Fix one unit test, comment test that requires premium gitlab
* Add changelog
* Update plugins/modules/source_control/gitlab/gitlab_group_variable.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update changelogs/fragments/4086-rework_of_gitlab_proyect_variable_over_gitlab_group_variable.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* Added conditional gitlab_premium_tests variable when required
* Allow delete without value
* Fix variable name
* Linting
* Value should not be required in doc
* Linting missing new-line
* Update changelogs/fragments/4086-rework_of_gitlab_proyect_variable_over_gitlab_group_variable.yml
Co-authored-by: Markus Bergholz <git@osuv.de>
Co-authored-by: Markus Bergholz <git@osuv.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
The passwordstore lookup plugin depends on parsing GnuPG's
error messages in English language. As a result, detection of
a specific error failes when users set a different locale.
This change corrects this by setting the `LANGUAGE` environment
variable to `C` when invoking `pass`, as this only affects
gettext translations.
See
https://www.gnu.org/software/gettext/manual/html_node/The-LANGUAGE-variable.html
Given a password stored in _path/to/secret_, requesting the password
_path/to_ will literally return `path/to`. This can lead to using
weak passwords by accident/mess up logic in code, based on the
state of the password store.
This is worked around by applying the same logic `pass` uses:
If a password was returned, check if there is a .gpg file it could
have come from. If not, treat it as missing.
Fixesansible-collections/community.general#4185
* Included efidisk0 option to be able to create VMs with persitent EFI disks
* Added forgotten argument to create_vm invocation and missing test for update
* Added changelog fragment relevant to PR
* Fixed documentation issues (missing period, and added version) from review
* Removed breaking change dependency for new option, modified changelog fragment according to review
* Fixed typo in documentation
* Added examples of `efidisk0` usage
* Added examples of `efidisk0` usage
* Fixed lines containing blank spaces
* Rebased on 4.4.0, added efi option, added sanity checks on efi option
* Adjusted version_added to 4.5.0
* Corrected typo in create_vm invocation, adjusted merging of efi and efidisk0 options
* Updated efidosk0 option to dict, added flattening to str, added constraint on bios option if efidisk0 is set
* Replaced loop by list comprehension for efidisk0 flattening
* Removed unused code left over from refactor from efi/efidis0 options
* Add new module: pmem
This commit introduces to pmem module to configure Intel Optane
Persistent Memory modules (PMem).
* Add botmeta
* Update plugins/modules/storage/pmem/pmem.py
* Convert to snake_case options
* Update related to xmltodict
* Update to use list instead of string
* Update to use single quote to the string
* Update plugins/modules/storage/pmem/pmem.py
* Updated keycloak.py to allow defining connection timeout value (#4168) (#2)
* Added parameter to doc_fragments and edited the changelog message (#4168)
* Added parameter to doc_fragments and edited the changelog message (#4168)
* begin add private network
* scaleway_private_network , basic add and remove ok, work in progress
* scaleway_private_network : add search in next page
* scalewy_private_network add tags
* scaleway_private_network fix correct return value for register
* scaleway_privat_network change some text
* fix some sanity
* fix line too long
* fix line too long SCALEWAY_LOCATION
* some change for sanity
* fix sanity again
* add author in BOTMETA
* fix error in name in fike BOTMETA
* Update plugins/modules/cloud/scaleway/scaleway_private_network.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/cloud/scaleway/scaleway_private_network.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/cloud/scaleway/scaleway_private_network.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/cloud/scaleway/scaleway_private_network.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/cloud/scaleway/scaleway_private_network.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/cloud/scaleway/scaleway_private_network.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/cloud/scaleway/scaleway_private_network.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/cloud/scaleway/scaleway_private_network.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/cloud/scaleway/scaleway_private_network.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* add test for scaleway_private_network
* Update plugins/modules/cloud/scaleway/scaleway_private_network.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/cloud/scaleway/scaleway_private_network.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/cloud/scaleway/scaleway_private_network.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/cloud/scaleway/scaleway_private_network.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* opentelemetry: enrich services for jenkins, hetzner, jira, zypper, chocolatey
* remove source and name for the time being
Those arguments can be later on in the future added, maybe with some opt-in feature, so let's only focus in the ones which are fully http based for now
* changelog fragment
* Update changelogs/fragments/4105-opentelemetry_plugin-enrich_jira_hetzner_jenkins_services.yaml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* dconf: Skip processes that disappeared while we inspected them
Fixes#4151
* Update changelogs/fragments/4151-dconf-catch-psutil-nosuchprocess.yaml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* pacman: rewrite with a cache to speed up execution
- Use a cache (or inventory) to speed up lookups of:
- installed packages and groups
- available packages and groups
- upgradable packages
- Call pacman with the list of pkgs instead of one call per package (for
installations, upgrades and removals)
- Use pacman [--sync|--upgrade] --print-format [...] to gather list of
changes. Parsing that instead of the regular output of pacman, which
is error prone and can be changed by user configuration.
This can introduce a TOCTOU problem but unless something else calls
pacman between the invocations, it shouldn't be a concern.
- Given the above, "check mode" code is within the function that would
carry out the actual operation. This should make it harder for the
check code and the "real code" to diverge.
- Support for specifying alternate package name formats is a bit more
robust. pacman is used to extract the name of the package when the
specified package is a file or a URL.
The "<repo>/<pkgname>" format is also supported.
For "state: latest" with a list of ~35 pkgs, this module is about 5
times faster than the original.
* Let fail() actually work
* all unhappy paths now end up calling fail()
* Update copyright
* Argument changes
update_cache_extra_args handled as a list like the others
moved the module setup to its own function for easier testing
update and upgrade have no defaults (None) to let required_one_of() do
its job properly
* update_cache exit path
Shift successful exit without name or upgrade under "update_cache".
It is an error if name or upgrade isn't specified and update_cache wasn't specified
either. (Caught by ansiblemodule required_one_of but still)
* Add pkgs to output on success only
Also align both format, only pkg name for now
* Multiple fixes
Move VersionTuple to top level for import from tests
Add removed pkgs to the exit json when removing packages
fixup list of upgraded pkgs reported on upgrades (was tuple of list for
no reason)
use list idiom for upgrades, like the rest
drop unused expand_package_groups function
skip empty lines when building inventory
* pacman: add tests
* python 2.x compat + pep8
* python 2.x some more
* Fix failure when pacman emits warnings
Add tests covering that failure case
* typo
* Whitespace
black failed me...
* Adjust documentation to fit implicit defaults
* fix test failures on older pythons
* remove file not intended for commit
* Test exception str with e.match
* Build inventory after cache update + adjust tests
* Apply suggestions from code review
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/packaging/os/pacman.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* changelog
* bump copyright year and add my name to authors
* Update changelogs/fragments/3907-pacman-speedup.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* maintainer entry
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update Documentation with additional example
* Added an example to have the plugin return an IP address for a Proxmox guest, instead of the name of the guest (default behavior)
* Added an example to include a string literal to every guest (to support a playbook being able to check for variable presence to identify inventory in use)
* Update for line length readability
Co-authored-by: Felix Fontein <felix@fontein.de>
* Changed to cleaner static value
* Changed text for clarity
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* value is not required when state is absent
* fix integration test. missing value
* fix condition
* add changelog fragment
* fail fast
* try required_if on suboptions
* revert
* Update plugins/modules/source_control/gitlab/gitlab_project_variable.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* fix naming in doc
* typo in name
Co-authored-by: Felix Fontein <felix@fontein.de>
* homebrew_cask: reinstall when force is install option
* add changelog entry
* Fix OSX CI runs - run as non-root
* test with cask that has no macos dependencies
* use `brooklyn` cask to test
* Fully use Ansible's option handling. Deprecate not specifying sender.
* Update plugins/callback/mail.py
Co-authored-by: Andrew Klychkov <aaklychkov@mail.ru>
Co-authored-by: Andrew Klychkov <aaklychkov@mail.ru>
* Added new feature for ansible_user and ansible_port
* Replaced 'try' and 'except' with 'if' condition
* Replace '!=' with 'is not'
* Fixed if condition
* Implement the constructed interface
* Correction at the suggestion of felixfontein
* Added new options in unit test for icinga2 inventory
* Added blank lines in unit test for icinga2 inventory
* Added default filter in example
Co-authored-by: Felix Fontein <felix@fontein.de>
* Fixed variable name in example
Co-authored-by: Felix Fontein <felix@fontein.de>
* Added a changelog fragment
* Fixed changelog fragment
Co-authored-by: Felix Fontein <felix@fontein.de>
* Updated documentation options
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* add profile parameter for scaleway inventory
* Update doc from review and add changelog
* Update changelogs from review
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Fix local port regex
Thsi PR fix the bug reported in #4091
* Update changelogs/fragments/4092-fix_local_ports_regex_listen_ports_facts.yaml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
When using project it will use project level runner to create runner that based on python-gitlab it will be used for enabling runner and needs a runner_id so for creating a new runner it should use gitlab level runner
Signed-off-by: Seena Fallah <seenafallah@gmail.com>
* [inventory/cobbler] Add exclude/include_profile option
Also some minor cleanup
* Review suggestions
* Still must init cache_key
* Add note to exclude_profiles about include_profiles
* Add changelog fragment
* linode: Allow templating token for dynamic inventory
Template the value for the access_token if it's a Jinja template.
Allows for looking up tokens from files or pulling from secrets stores like Vault.
* add Linode changelog fragment
* Fix lookup example for newer versions of Ansible
Co-authored-by: Felix Fontein <felix@fontein.de>
* Rename test case for clarity
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* bugfix: don't overwrite results in 'mismatched'
Whichever mismatched package is evaluated last is the value stored in the
'mismatched' key. Instead, it should have a subdict for each pkg that is mismatched
to keep in line with its documented usage.
* Update changelogs/fragments/4078-python_requirements_info.yaml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Fix 'changed' status for yarn global by actually expanding ~
* Ignore use-argspec-type-path test
* Add changelog fragment
* Update changelogs/fragments/4048-expand-tilde-in-yarn-global-install-folder.yaml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Properly parse JSON Lines output from yarn
* Properly support output of yarn global list
* Add changelog fragment
* Check that the string starts with 'bins-'
* Fix changelog fragment
* Update changelogs/fragments/4050-properly-parse-json-lines-output-from-yarn.yaml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* initial development of homectl module
* botmeta
* fix some linting
* Update .github/BOTMETA.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/system/homectl.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/system/homectl.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/system/homectl.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/system/homectl.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* use array form of run_command
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/system/homectl.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* added mofifying user record and cleaned up based on comments
* added updating records/multiple changes regarding options, examples doc, return doc
* add integration tests and more overall improvements
* Update plugins/modules/system/homectl.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/system/homectl.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/system/homectl.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/system/homectl.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/system/homectl.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/system/homectl.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/system/homectl.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/system/homectl.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/system/homectl.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* removed modify handle within present
* adding more options and better checking of user records when updating
* Apply suggestions from code review
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/system/homectl.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Add code review changes
- remove unsafe_shell with run_command.
- use dict.pop() in user_metadata dict.
- consistent quoting to single quotes.
- change logic to determine check mode better
- fix integration tests and added check_mode tests
* Fix handling of mount opts
When a user is created without mountopts homed will use nodev and nosuid
by default, however the user record metadata will not contain these
values. This commit takes extra care that correct value is being set to
true or false. So if a user gives mountopts with just nodev we need to
make sure the nosuid and noexec gets set to false, etc. If mountopts are
same as currently in user record make sure nothing would be changed and
outputs correctly.
Also fixed some tests.
* change fmethod modify_user to prepare_modify_user_command
* Code review fixes and add existing user pw checking
- Added methods to check existing users password is correct by comparing
the hash stored in homed user record and the hash of given password
- Updated integration tests for above case
- Added aliases file so CI can run
* Apply suggestions from code review
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Adding while loop to wait
* Adding changelog fragment
* Adding parameter and more docs
* Adjusting docs
Co-authored-by: Travis Scotto <tscotto@webstaurantstore.com>
* one_vm: add release action
Previously you could create VMs with the `vm_start_on_hold` parameter
but then ansible couldn't release the VMs so they would be scheduled to
run. This PR adds the ability to release VMs which are in the 'HOLD'
state.
* Add changelog fragment
* Update changelogs/fragments/4036-onevm-add-release-action.yaml
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/cloud/opennebula/one_vm.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Make releasing a VM part of the running state
When `state: running` is specified the code checks if the VM is in a
'HOLD' state and will release the VM when needed.
Co-authored-by: Gerben Welter <gerben.welter@hcs-company.com>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Add functionality proposed in https://github.com/ansible-collections/community.general/issues/666
* Fix pylint errors mentioned in CI pipeline
* Fix pylint errors mentioned in CI pipeline (continued)
* Update plugins/modules/packaging/os/snap.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Apply suggestions from code review
Co-authored-by: Felix Fontein <felix@fontein.de>
* Added tests
Fixed error occurring when called without options
Added changelog snippet
* Remove changelog entry as suggested in review
Co-authored-by: Felix Fontein <felix@fontein.de>
* Apply suggestions from code review
Co-authored-by: Felix Fontein <felix@fontein.de>
* rewrite `if len(overall_options_changed) > 0` in a more Pythonic way
un-indent `if len(overall_options_changed) > 0` to only be executed after the options of all snaps have been checked
* better placement of local variable `overall_options_changed`
* Re-arrange code to reduce indentation level (suggested by reviewer)
* Re-arrange code to reduce indentation level (suggested by reviewer, continued)
* Re-arrange code to reduce indentation level (suggested by reviewer, continued)
Raise exception if option map returned by `snap set` contains list container (suggested by reviewer)
Handle Python2 type `long` correctly (suggested by reviewer)
Co-authored-by: Felix Fontein <felix@fontein.de>
* Fix detection of installed cargo packages with hyphens in name
* Add changelog fragment
* Fix outdated package detection
* Add changelog fragment for af4fae72
* One more thing
* Add idempotency tests
* dont check for urls when args is None
* add changelog fragment
* fix lint on changelog fragment
Co-authored-by: Nick Gregory <nick.gregory@openenterprise.co.uk>
* puppet: Add documentation and remove deprecation for show_diff
* Add changelog fragment
* Update changelogs/fragments/3980-puppet-show_diff.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/system/puppet.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/system/puppet.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Fixing syntax error introduced in 29298da3
* More documentation for show_diff and fix some sanity errors
* Update changelogs/fragments/3980-puppet-show_diff.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update tests/sanity/ignore-2.10.txt
Co-authored-by: Felix Fontein <felix@fontein.de>
* Add validate-modules:parameter-invalid to ignores due to invalid and depricated alias
* Keep use-argspec-type-path in ignores
* Update plugins/modules/system/puppet.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Benoit Vaudel <benoit@catalyst.net.nz>
Co-authored-by: Felix Fontein <felix@fontein.de>
* ipmi_power: Add machine option to ensure the power state via the remote target address
* Fix yamllint sanity check error
* Add changelog fragment entry
* Apply suggestions from the code review
* update to apply suggestions
* Add version_added.
Co-authored-by: Felix Fontein <felix@fontein.de>
* New module for cargo command
* Resolve CI errors
* Update plugins/modules/packaging/language/cargo.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/packaging/language/cargo.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/packaging/language/cargo.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Add maintainer
* Change installed_packages from property to function
* Allow cargo to install list of of packages
* Remove period at the end of task names
* Pass only the list of packages to take action on to cargo
* Add integration tests for cargo
* Update plugins/modules/packaging/language/cargo.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Apply suggestions from code review
* Update tests/integration/targets/cargo/tasks/setup.yml
* Update tests/integration/targets/cargo/tasks/setup.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* nmcli: add wireguard connection type
* nmcli: fix wireguard unit tests
* nmcli: set ipv4.method to disabled if ip4 not set
Method 'auto' is not supported for WireGuard
* nmcli: add wireguard documentation
* nmcli: clean up wireguard documentation
* nmcli: add wireguard changelog fragment
* nmcli: fix wireguard documentation
* Apply suggestions from code review
Co-authored-by: Andrew Pantuso <ajpantuso@gmail.com>
Co-authored-by: Andrew Pantuso <ajpantuso@gmail.com>
* proxmox: Add clone parameter
* Add changelog fragment
* Add version_added
Co-authored-by: Felix Fontein <felix@fontein.de>
* Add PR URL to changelog fragment
Co-authored-by: Felix Fontein <felix@fontein.de>
* Clarify what content_check does
* Split up try/except block to give a separate error message when creation pre-checks fail
* Create seperate case for cloning
* Prevent 'clone' argument from being removed
* Fix double argument, add todo's
* Check if to be cloned container actually exists
* Adjust module options dependencies
* Require 'storage' parameter when cloned container is not a template and ignore otherwise
* Don't only create linked clones of template containers
* Fix pylint errors
* Add extra example
* Minor language fix
* Add clone_type parameter to specify cloning behaviour
* I can't find if openvz nodes have this clone API, so just don't support it
* Remove unrelated changes
* Don't pass unused kwargs
* Revert more unrelated changes
* Remove required_together clone and clone_type because clone_type has a default choice
* Fix clone_type reference
Co-authored-by: Felix Fontein <felix@fontein.de>
* Fix missing period
Co-authored-by: Felix Fontein <felix@fontein.de>
* Fix redundant period
Co-authored-by: Felix Fontein <felix@fontein.de>
* Fix redundant period
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Add module and pass the andebox validate-modules
* Fixes pep8 and sanity checks
* Add tests (intending that they'll fail)
* Fix pep8 complaint
* Remove stub test_sudoers file
* Add version_added to documentation
Co-authored-by: Andrew Pantuso <ajpantuso@gmail.com>
* Various improvements as suggested by reviewers
* Remove further required: false from documentation
* Make yaml indentation consistently indented
* Remove default for command argument
Co-authored-by: Andrew Pantuso <ajpantuso@gmail.com>
* Refactor check_mode checking as guards
* Update documentation formatting and use to_native
* Update plugins/modules/system/sudoers.py
* Update examples and formatting
* Fix merge conflict
* Update handle
* Add some integration tests
* Update tests to pass yamllint
* Fix assertions typo
Co-authored-by: Alexei Znamensky <103110+russoz@users.noreply.github.com>
* Remove wrapping quotes from assertions
* Use >- for long example names
* Add aliases file to sudoers integration tests
* Fix integration test name
* Create new alternative sudoers directory in case /tmp doesn't exist
* Alternative assertion test for checking rule revocation
* Re-quote assertions
* Update version_added to 4.3.0
Co-authored-by: Felix Fontein <felix@fontein.de>
* Uppercase first character of short_description
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Andrew Pantuso <ajpantuso@gmail.com>
Co-authored-by: Alexei Znamensky <103110+russoz@users.noreply.github.com>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Add sending of attachments
* Change required arguments and add changelog
- text was still default -> changed to required_one_of text or attachments
- Add version_added
- Add changelog fragment for mattermost attachments
Co-Authored-By: Felix Fontein <felix@fontein.de>
* Fix wrong indentation
* Add trailing comma
Co-authored-by: Felix Fontein <felix@fontein.de>
* Remove default=None
Co-authored-by: Felix Fontein <felix@fontein.de>
* Fix sentence
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* fix scaleway_user_data
scaleway_user_data put cloud-init valuer with 2 unexpected " (begin and end of value)
If Content-Type is not change , it's jsonify ( file module_utils/scaleway.py ligne 131 )
fix the probleme when "Content-Type" is used instead of "Content-type"
* Create 3940_fix_contenttype_scaleway_user_data.yml
* Update changelogs/fragments/3940_fix_contenttype_scaleway_user_data.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Add PTR synchronization support for dnszones
* Add changelog fragment
* Update changelogs/fragments/3374-add-ipa-ptr-sync-support.yml
Update to reflect proper module name.
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/identity/ipa/ipa_dnszone.py
Add period.
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/identity/ipa/ipa_dnszone.py
Remove requires comment.
Co-authored-by: Felix Fontein <felix@fontein.de>
* Change type to boolean in following with API docs
* Tested with needed changes made.
* Fix documentation to max implementation
* Check for specific params; allow for modifications if needed
* Add PTR synchronization support for dnszones
* Add changelog fragment
* Update changelogs/fragments/3374-add-ipa-ptr-sync-support.yml
Update to reflect proper module name.
Co-authored-by: Felix Fontein <felix@fontein.de>
* Remove trailing whitespace
* Make use of full search and compare params
* Fix formatting errors
* Move the change flag outside of module check
* Fix itens typo to items
* Update dynamicupdate to a boolean
* Remove unnecessary flags and options
* Minor comment changes
* Update changelogs/fragments/3374-add-ipa-ptr-sync-support.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/identity/ipa/ipa_dnszone.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Anne-Marie Lee <alee@datainterfuse.com>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Add counter filter
* move counter filter doc to existing chapter
* Use existing typerror exception from Counter
* Match counter filter example task name and output
* Prepare for distutils.version being removed in Python 2.12.
* Fix copy'n'paste error.
* Re-add Loose prefix.
* Fix Python version typos.
* Improve formulation.
* Move message into own line.
* Fix casing, now that the object is no longer called Version.
* Add additional auth support to Gitlab (#705)
- removed unused imports from module_utils.gitlab
- fix bug in gitlab_project to check if avatar_path is provided
* add doc_fragment and argument_spec for gitlab auth
* doc fixes and remove avatar_path bug fix
* small doc changes, pass validate_certs to requests call
* update changelog
