* add a couple conditionals to make sure updating can be done with vmid only
* add changelog to PR
* replace conditional with any
* any takes list
* fix next conditional
* Update changelogs/fragments/5206-proxmox-conditional-vmid.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* capitalize VM and remove conditional for name requirement upon creation
* Fix URL destroyed by GitHub.
Co-authored-by: Alexei Znamensky <103110+russoz@users.noreply.github.com>
Co-authored-by: Yvan E. Watchman <git@yvanwatchman.eu>
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Alexei Znamensky <103110+russoz@users.noreply.github.com>
* homebrew: add Linux brew path to defaults
* changelogs: add 5241 fragment
* homebrew_tap: add Linux brew path to defaults
* changelogs: update 5241 entry
* homebrew_tap: format path separator in desc
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* WDC Redfish support for setting the power mode.
* Apply suggestions from code review
Co-authored-by: Felix Fontein <felix@fontein.de>
* Add change fragment.
* Add extension to changelog fragment.
Co-authored-by: Felix Fontein <felix@fontein.de>
* The EnvironmentError is now handled in the splid_pid_name function.
The error also had a wrong indentation. See previous setup with correct setup: 6a7811f696/plugins/modules/system/listen_ports_facts.py
* Add changelog fragment
* Sanity Check failed before
* Update changelogs/fragments/5202-bugfix-environmentError-wrong-indentation.yaml
Co-authored-by: Paul-Kehnel <paul.kehnel@ocean.ibm.com>
Co-authored-by: Felix Fontein <felix@fontein.de>
* nmcli: avoid changed status for most cases with VPN connections
Follow-up https://github.com/ansible-collections/community.general/pull/4746
* `nmcli connection show` includes vpn.service-type but not vpn-type.
Switching to vpn.service-type removes unneeded diffs while keeping
the same functionality, as vpn-type is an alias of vpn.service-type
per nm-settings-nmcli(1).
NetworkManager also adds `org.freedesktop.NetworkManager.` prefix for
known VPN types [1]. The logic is non-trivial so I didn't implement it
in this commit. If a user specifies `service-type: l2tp`, changed will
be always be True:
- "vpn.service-type": "org.freedesktop.NetworkManager.l2tp"
+ "vpn.service-type": "l2tp"
* The vpn.data field from `nmcli connection show` is sorted by keys and
there are spaces around equal signs. I added codes for parsing such
data.
Tests are also updated to match outputs of nmcli commands.
[1] https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/blob/1.38.4/src/libnm-core-impl/nm-vpn-plugin-info.c#L619
* Add changelog
* Some suggested changes
* Make space stripping more flexible - works for cases without equal
signs.
* Keep vpn.data in a test case with no spaces
* nmcli: allow any string for vpn service-type
Using `local: true` users can enforce to work only with local policy
modifications. i.e.
# Without `local`, no new modification is added when port already exists
$ sudo ansible -m seport -a 'ports=22 state=present setype=ssh_port_t proto=tcp' localhost
localhost | SUCCESS => {
"changed": false,
"ports": [
"22"
],
"proto": "tcp",
"setype": "ssh_port_t",
"state": "present"
}
$ sudo semanage port -l -C
# With `local`, a port is always added/changed in local modification list
$ sudo ansible -m seport -a 'ports=22 state=present setype=ssh_port_t proto=tcp local=true' localhost
localhost | CHANGED => {
"changed": true,
"ports": [
"22"
],
"proto": "tcp",
"setype": "ssh_port_t",
"state": "present"
}
$ sudo semanage port -l -C
SELinux Port Type Proto Port Number
ssh_port_t tcp 22
# With `local`, seport removes the port only from local modifications
$ sudo ansible -m seport -a 'ports=22 state=absent setype=ssh_port_t proto=tcp local=true' localhost
localhost | CHANGED => {
"changed": true,
"ports": [
"22"
],
"proto": "tcp",
"setype": "ssh_port_t",
"state": "absent"
}
$ sudo semanage port -l -C
# Even though the port is still defined in system policy, the module
# result is success as there's no port local modification
$ sudo ansible -m seport -a 'ports=22 state=absent setype=ssh_port_t proto=tcp local=true' localhost
localhost | SUCCESS => {
"changed": false,
"ports": [
"22"
],
"proto": "tcp",
"setype": "ssh_port_t",
"state": "absent"
}
# But it fails without `local` as it tries to remove port defined in
# system policy
$ sudo ansible -m seport -a 'ports=22 state=absent setype=ssh_port_t proto=tcp' localhost
An exception occurred during task execution. To see the full traceback, use -vvv. The error was: ValueError: Port tcp/22 is defined in policy, cannot be deleted
localhost | FAILED! => {
"changed": false,
"msg": "ValueError: Port tcp/22 is defined in policy, cannot be deleted\n"
}
Signed-off-by: Petr Lautrbach <plautrba@redhat.com>
Signed-off-by: Petr Lautrbach <plautrba@redhat.com>
* Update redfish module for compatibility with VirtualMedia resource location from Manager to Systems
* Add changelogs fragments for PR 5124
* Update some issue according to the suggestions
* update changelogs fragment to list new features in the minor_changes catagory
Co-authored-by: Tami YY3 Pan <panyy3@lenovo.com>
* Adjust booleans in system modules.
* Fix some IP addresses
Co-authored-by: Sandra McCann <samccann@redhat.com>
Co-authored-by: Sandra McCann <samccann@redhat.com>
* feat: Add crc32 filter
Compute CRC32 checksum of a string and return its hex representation. Can be
use to create short checksums.
Signed-off-by: Julien Riou <julien@riou.xyz>
* Update license lines
* Improve string check of a crc32 value
Signed-off-by: Julien Riou <julien@riou.xyz>
Signed-off-by: Julien Riou <julien@riou.xyz>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Fix nsupdate when updating NS record
* Changelog fragment
* Update changelogs/fragments/5112-fix-nsupdate-ns-entry.yaml
Co-authored-by: Felix Fontein <felix@fontein.de>
* Switch to fallback to AUTHORITY instead of using with NS type.
* Update plugins/modules/net_tools/nsupdate.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/net_tools/nsupdate.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: jonathan lung <lungj@heresjono.com>
Co-authored-by: Felix Fontein <felix@fontein.de>
* pipx: add state latest
* add changelog fragment
* Update plugins/modules/packaging/language/pipx.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Add sanity test (currently fails).
* doc_fragments can also be non-GPLv3+.
* Replace 'Author:' by 'Copyright:' in some specific cases.
* Avoid matching string for license checkers.
* Reformulate not to throw license detection off.
* Add PSF copyright notice for plugins/module_utils/_mount.py.
* Add generic copyright notices.
* Update changelog fragment.
* WDC Redfish support for chassis indicator LED toggling.
* Added changelog fragment.
* Apply suggestions from code review
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Move licenses to LICENSES/, run add-license.py, add LICENSES/MIT.txt.
* Replace 'Copyright:' with 'Copyright'
sed -i 's|Copyright:\(.*\)|Copyright\1|' $(rg -l 'Copyright:')
Co-authored-by: Maxwell G <gotmax@e.email>
* xfconf: add command output to results
* add changelog fragment
* add docs for return value cmd
* Update plugins/modules/system/xfconf.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Fix: Add user agent header to allow request through CDN/WAF with bot protection
* upate doc-fragment
* move http_agent variable assignment
* set http_agent param for all Keycloak API Requests
* Update plugins/doc_fragments/keycloak.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update changelogs/fragments/5023-http-agent-param-keycloak.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* fix formatting
* Update plugins/doc_fragments/keycloak.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Slack: Add support for (some) groups
Some of the older private channels in the workspace I'm working in have channel ID's starting with `G0` and `GF` and this resulted to false positive `channel_not_found` errors.
I've added these prefixes to the list to maintain as much backwards compatibility as possible.
Ideally the auto-prefix of the channel name with `#` is dropped entirely, given the Channel ID's have become more dominant in the Slack API over the past years.
* Add changelog fragment for slack channel prefix fix
* Update changelogs/fragments/5019-slack-support-more-groups.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Initial Rework of netstat and ss to include additional information.
State, foreign address, process.
* Fixed sanity tests. Python 2 compatible code. pylint errors resolved.
* Sanity tests. ss_parse fix minor error I created before.
* Rename variable for clarity
* Python2 rsplit takes no keyword argument. -> remove keyword argument
* Generic improvments for split_pid_name. Added changelog
* Sanity Test (no type hints for python2.7)
* add include_non_listening param. Add param to test. Add documentation. Only return state and foreign_address when include_non_listening
* Update changelogs/fragments/4953-listen-ports-facts-extend-output.yaml
Co-authored-by: Felix Fontein <felix@fontein.de>
* Add info to changelog fragment. Clarify documentation.
* The case where we have multiple entries in pids for udp eg: users:(("rpcbind",pid=733,fd=5),("systemd",pid=1,fd=30)) is not in the tests. So roll back to previous approach where this is covered. Fix wrong if condition for include_non_listening.
* Rewrite documentation and formatting.
* Last small documentation adjustments.
* Update parameters to match description.
* added test cases to check if include_non_listening is set to no by default. And test if ports and foreign_address exists if set to yes
* undo rename from address to local_address -> breaking change
* Replace choice with bool, as it is the correct fit here
* nestat distinguishes between tcp6 and tcp output should always be tcp
* Minor adjustments in the docs (no -> false, is set to yes -> true)
Co-authored-by: Paul-Kehnel <paul.kehnel@ocean.ibm.com>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Pacman: Add support for setting install reason
* Improved description
* Fix documentation
* Add changelog fragment
* Use source for installation
* Get all reasons at once
* Removed default for reason
* Added version info to documentation
* Fix NameError
* Moved determination of reason to _build_inventory
* Fix duplication and sanity errors
* adjust tests for changed inventory
* Documentation: remove empty default for reason
* mention packages with changed reason in exit params/info
* Added integration tests for reason and reason_for
Inspired by the integration tests for url packages
* Correct indentation
* Fix indentation
* Also sort changed packages in normal mode
* Also sort result in unit test
* Apply suggestions from code review
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Fix returnall for gopass
Gopass was always given the --password flag, despite there being no need for this.
* Add changelog fragment
Co-authored-by: Sylvia van Os <sylvia.van.os@politie.nl>
* gconftool2: deprecate state get
* added changelog fragment
* Update plugins/modules/system/gconftool2.py
* Update plugins/modules/system/gconftool2.py
* Expose unredirected_headers to module
In some cases, when the initial request returns a redirect and we want
to follow it to get the artifact, we might not want to include certain
headers in the redirection request. Specially headers like
Authorization and Cookies.
Or perhaps the redirect server returns a 400 because it included some
unexpected headers.
Fetch url already supports this feature, but it was being shadowed by
maven_artifact. In here we just expose it.
* Fix Linting errors
* Applied Comments
- Specified version added
- Changed description of unredirected_headers
* Check for ansible version
If it's 2.11 or older, we ignore unredirected_headers, otherwise we use
it, as fetch_url has them
* Applied comments
- Removed duplicated code in the call of fetch_url. Used kwargs instead
- Added check if unredirected_params is not empty and the fetch_url
function does not support it
- Changed function that checks for ansible version
- Removed unused import
* Remove 2.11 breaking change
Made default only for ansible-core version 2.12 and above, but for keep
it empty for ansible-core version 2.11 and below.
Also include the following changes:
- change doc to use C() on the function description
- changed doc to use ansible-core instead of Ansible
* Changes in description for readability
* Add changelog fragment
* Change description changelog fragment
* Fix keyring_info when using keyring library
This line used to always clobber the passphrase retrieved via the `keyring` library, making it useless on everything except gnome-keyring. After this change, it'll only use the alternate method if the default one didn't work.
* delete whitespace
* add changelog fragment
* Update changelogs/fragments/4964-fix-keyring-info.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Strip downloading... of unseen URLs
* Added changelog fragment
* Added integration tests for reason and reason_for
Inspired by the integration tests for url packages
* Revert "Added integration tests for reason and reason_for"
This reverts commit f60d92f0d7.
Accidentally commited to the wrong branch.
* add int parse handling
* Revert "add int parse handling"
This reverts commit db2aac4254.
* fix: vmid check if state is absent
* add changelogs fragments
* Update changelogs/fragments/4945-fix-get_vm-int-parse-handling.yaml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Fix path detection for gopass
As per fc8c9a2286/docs/features.md (initializing-a-password-store), gopass defaults to ~/.local/share/gopass/stores/root for its password store root location.
However, the user can also override this, and this will be stored in the gopass config file (ed7451678c/docs/config.md (configuration-options)).
This patch ensures that the config setting in gopass is respected, falling back to the default gopass path. pass' behaviour remains unchanged.
* Formatting improvements
Co-authored-by: Felix Fontein <felix@fontein.de>
* Add changelog fragment
* Formatting improvement
Co-authored-by: Alexei Znamensky <103110+russoz@users.noreply.github.com>
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Alexei Znamensky <103110+russoz@users.noreply.github.com>
* WDC Redfish Info / Command modules for Western Digital Ultrastar Data102 storage enclosures.
Initial commands include:
* FWActivate
* UpdateAndActivate
* SimpleUpdateStatus
* delete unnecessary __init__.py modules
* PR Feedback
Notes list not guaranteed to be sorted
Use EXAMPLES tos how specifying ioms/basuri
Import missing_required_lib
* Apply suggestions from code review
Suggestions that could be auto-committed.
Co-authored-by: Felix Fontein <felix@fontein.de>
* Remove DNSCacheBypass
It is now the caller's responsibility to deal with stale IP addresses.
* Remove dnspython dependency.
Fix bug that this uncovered.
* Apply suggestions from code review
Co-authored-by: Felix Fontein <felix@fontein.de>
* PR Feedback
* Documentation, simple update status output format, unit tests.
Add docs showing how to use SimpleUpdateStatus
Change the format of SimpleUpateStatus format, put the results in a sub-object.
Fix unit tests whose asserts weren't actually running.
* PR Feedback
register: result on the 2nd example
* Final adjustments for merging for 5.4.0
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update proxmox.py
* Forgot a debug print.
* pep
* Check if int, old school way.
* pep, once again.
* Create 4910-fix-for-agent-enabled.yml
* Must check the first listentry for enabled=1
* Update changelogs/fragments/4910-fix-for-agent-enabled.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* added password prompt support for machinectl
* include review comments
This includes the review comments as well as changelog fragment. This also gives more information about the polkit rule.
* fix yaml doc with leftover bracket
* include review comments 2
* move regex compile to global scope
this is especially useful for the `enable_from_environment` option, as
this allows to set a default for the whole project, instead of relying
on everyone setting the environment variable
* Use syntax that works in both Python 2 and 3 when iterating through a
dict that's going to be mutated during iteration
* Fixes `dictionary changed size during iteration` error
* Fixes#4932
* fixes lxd connection plugin issue #4886
remote_addr value was set to literal string 'inventory_hostname' instead
of the value for inventory_hostname variable. solution found in PR
ansible/ansible#77894
* changelog fragment - bugfix - lxd connection plugin
* correct changelog fragment
* Update changelogs/fragments/4886-fix-lxd-inventory-hostname.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* replace _host instance variable with calls to get 'remote_addr' option
suggested by felixfontein
Co-authored-by: Felix Fontein <felix@fontein.de>
* Do not ignore tld option in DSV lookup plugin
* add changelog fragment
* Update changelogs/fragments/4911-dsv-honor-tld-option.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Fix GetChassisPower when multiple chassis are present
When multiple chassis are present, and one or more of those chassis do _not_
report power information, the GetChassisPower command will fail. To address
that, only report a failure if _all_ of the Chassis objects lack power
power reporting functionality.
Fixes#4901
* Update changelogs/fragments/4901-fix-redfish-chassispower.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Add GetManagerInventory command to redfish_info
Adding GetManagerInventory command to redfish_info, similar to
GetSystemInventory to report Manager specific information like:
- FirmwareVersion
- Model
- ManagerType
Fixes#4899
* Update changelogs/fragments/4899-add-GetManagerInventory-for-redfish_info.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Use visudo to validate sudoers rules before use
* Replace use of subprocess.Popen with module.run_command
* Switch out apt for package
* Check file mode when verifying file to determine whether something needs to change
* Only install sudo package for debian and redhat environments (when testing)
* Attempt to install sudo on FreeBSD too
* Try just installing sudo for non-darwin machines
* Don't validate file ownership
* Attempt to install sudo on all platforms
* Revert "Attempt to install sudo on all platforms"
This reverts commit b9562a8916.
* Remove file permissions changes from this PR
* Add changelog fragment for 4794 sudoers validation
* Add option to control when sudoers validation is used
* Update changelog fragment
Co-authored-by: Felix Fontein <felix@fontein.de>
* Add version_added to validation property
Co-authored-by: Felix Fontein <felix@fontein.de>
* Also validate failed sudoers validation error message
Co-authored-by: Felix Fontein <felix@fontein.de>
* Make visudo not executable instead of trying to delete it
* Update edge case validation
* Write invalid sudoers file to alternative path to avoid breaking sudo
* Don't try to remove or otherwise modify visudo on Darwin
* Update plugins/modules/system/sudoers.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Remove trailing extra empty line to appease sanity checker
Co-authored-by: Felix Fontein <felix@fontein.de>
* Add PSF-license.txt for plugins/module_utils/_mount.py.
* Move other licenses to licenses/.
* Revert "Move other licenses to licenses/."
This reverts commit eab4209889.
* passwordstore: Make compatible with shims, add backend config
This allows using the passwordstore plugin with scripts that wrap other
password managers. Also adds an explicit configuration (`backend` in
`ini` and `passwordstore_backend` in `vars`) to set the backend to `pass`
(the default) or `gopass`, which allows using gopass as the backend
without the need of a wrapper script. Please be aware that gopass
support is currently limited, but will work for basic operations.
Includes integrations tests.
Resolves#4766
* Apply suggestions from code review
* Add scw_compute_private_network
* fix argument required and BOTMETA
* little fix in commentary/doc
* test with link for ansible-doc check
* remove unwanted file
* fix entry missing in meta/runtime.yml
* scaleway_compute_private_network add some check in test and some fic in doc
* a=add missing del os.environ
* fix whitespace
* test_scaleway_compute_private_network : fix test
* test_scaleway_compute_private_network : fix pep8
* scaleway_compute_private_network
add . in description
* scaleway_compute_private_network: fix var name
* [scaleway_compute_private_network] add name for the example's task
* Update plugins/modules/cloud/scaleway/scaleway_compute_private_network.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/cloud/scaleway/scaleway_compute_private_network.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* cmd_runner: add __call__ method to invoke context
* change xfconf to use the callable form
* add changelog fragment
* Update changelogs/fragments/4791-cmd-runner-callable.yaml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Only pass subcommands when they are specified as module arguments.
* When 'subcommands' is specified, 'link' must be given for every subcommand.
* Extend subcommand tests.
The 'unsubscribe' command of 'subscription-manager' was deprecated
already in subscription-manager 1.11.3, shipped with RHEL 5.11.
As it was removed in subscription-manager 1.29.x, unsubscribing from
pools was thus broken.
The simple fix is to call the proper command, 'remove'.
* alternatives: Fix bug with priority default
If neigther the priority nor the subcommands where specified the module decided to update the priority with the default value anyway. This resulted in bug #4803 and #4804
* Add changelog fragment.
* Distinguish None from 0.
* Address review comments.
* Update plugins/modules/system/alternatives.py
Co-authored-by: Pilou <pierre-louis@libregerbil.fr>
* Remove unrelated issues from changelog.
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Pilou <pierre-louis@libregerbil.fr>
* Ensure sudoers config files are created with 0440 permissions to appease visudo validation
* Remove change not required by the bugfix
* Add changelog fragment for 4814 sudoers file permissions
* Update changelogs/fragments/4814-sudoers-file-permissions.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* Have less oct casting
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Added conditional to only collect qmpstatus on qemu VMs
* Processed feedback, added changelog
* Initial change to unit tests
* Made Sanity tests happy again
* Missed a function call, removed superfluous function
* Derp, no need to mock get_vm_status anymore
* Added detail checks whether hosts are mapped to the paused/prelaunch groups
* Fix sanity check
* Processed feedback
* Processed feedback - noqa
* add support to create L2TP and PPTP VPN connection
* Update plugins/modules/net_tools/nmcli.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/net_tools/nmcli.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/net_tools/nmcli.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/net_tools/nmcli.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/net_tools/nmcli.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/net_tools/nmcli.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/net_tools/nmcli.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/net_tools/nmcli.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* apply changes pointed on tests and review
- add changelog fragment
- change example code to use jinja2 in place of shell command
* removes trailing whitespace
* Update plugins/modules/net_tools/nmcli.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/net_tools/nmcli.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* removes linux command from examples
* remove unnecessary brakets
Co-authored-by: Felix Fontein <felix@fontein.de>
* remove unnecessary brakets
Co-authored-by: Felix Fontein <felix@fontein.de>
* simplify psk encoding on example
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/net_tools/nmcli.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/net_tools/nmcli.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* add unit tests
- test unchenged l2tp and pptp vpn connections
- test create l2tp and pptp vpn connections
- fix is_connection_changed to remove default ifname attribuition
* improve tests on vpn.data param
- fix _compare_conn_params to handle vpn.data as lists
* removes block and set_fact from example
Co-authored-by: Felix Fontein <felix@fontein.de>
* makes line shortter to better reading
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/net_tools/nmcli.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* xfconf: changed implementation to use cmd_runner
* added module_utils/xfconf.py
* xfconf_info: using cmd_runner
* added module_utils to BOTMETA.yml
* added changelog fragment
* use cmd_runner_fmt instead of deprecated form
* Add slaves parameter for module alternatives.
* alternatives: Improve documentation abous slaves parameter
* alternatives: Apply suggestions from code review
Co-authored-by: Felix Fontein <felix@fontein.de>
* alternatives: Add schangelog for slaves parameter
* alernatives: Add integration tests
* alternatives: Improv tests
* alternatives: Update tests/integration/targets/alternatives/tasks/slaves.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* alternatives: Rework logic to support updating priority and subcommands
* alternatives: Use more inclusive naming
* alternatives: Fix linter warnings
* alternatives: Dont fail if link is absent
* alternatives: Update changelog fragment
* alternatives: Add tests for prio change and removing
* alternatives: Apply suggestions from code review
Co-authored-by: Felix Fontein <felix@fontein.de>
* alternatives: Add `state=auto`to reset mode to auto
* alternatives: Fix linter warnings
* alternatives: Fix documentation.
* alternatives: Combine multiple messages.
* alternatives: Set command env for all commands.
* alternatives: Do not update subcommands if parameter is omited
* alternatives: Fix a bug with python 2.7 var scoping
* alternatives: Improce diff before generation
* alternatives: Fix linter warnings
* alternatives: Fix test names
* alternatives: Simplify subcommands handling and improve diffs
* aliases: Only test for subcommand changes if subcommands parameter is set.
* Update plugins/modules/system/alternatives.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Apply suggestions from code review
Co-authored-by: Felix Fontein <felix@fontein.de>
* added new statuses for qemu
* added document fragment
* lint fixes
* replaced f strings with %
* move the qmpstatus for qemu to a dedicated group
* added documentation to explain the new addition
* update changelog fragment to reflect the change correctly
* update changelog fragment to reflect the change correctly
* Apply suggestions from code review
Co-authored-by: Felix Fontein <felix@fontein.de>
* added a switch to get the qemu extended status
* Apply suggestions from code review
Co-authored-by: Felix Fontein <felix@fontein.de>
* groups created when qemu_extended_statuses is true and added tests to make sure they are there
* added test to make sure the groups are not present when qemu_extended_statuses is false
* Apply suggestions from code review
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* nmcli: use capital case "DNS" in documentation
In documentation sometimes DNS was written in (incorrect) lower
case "dns" and sometimes in (correct) capital case "DNS". Use the
right capital case spelling in all parameter descriptions.
* nmcli: documentation language
Co-authored-by: Felix Fontein <felix@fontein.de>
* nmcli: documentation language
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* redfish_command: documentation language and formatting
Update the documentation block with more English language
more consistent with other modules and finish each description
with a full stop.
* redfish_command: do not end short desc in full stop
* redfish_command: remove more "the" on documentation
Remove "The" from beginning of descriptions.
* redfish_command: start documentation description with capital case
* redfish_config: update documentation language and format
Add full stops at end of descriptions, small updates to language,
ensure descriptions start with a capital case letter.
* redfish_config: documentation consistency
Use "username" for description similarly to redfish_command.
* redfish_info: documentation formatting and language
Update documentation block for consistency with other modules
with full stop at end of descriptions and small language updates.
* idrac_redfish_command: documentation formatting and language
Update documentation block for consistency with other modules
with full stop at end of descriptions and small language updates.
* idrac_redfish_command: more doc consistency fixes
Call it iDRAC everywhere and not sometimes OOB controller.
* idrac_redfish_command: documentation formatting and language
Update documentation block for consistency with other modules
with full stop at end of descriptions and small language updates.
* idrac_redfish_info: documentation formatting and language
Update documentation block for consistency with other modules
with full stop at end of descriptions and small language updates.
* ilo_redfish_config: documentation formatting and language
Update documentation block for consistency with other modules
with full stop at end of descriptions and small language updates.
* ilo_redfish_info: documentation formatting and language
Update documentation block for consistency with other modules
with full stop at end of descriptions and small language updates.
* idrac_redfish_info: documentation language
Call it "HTTP request" and not "URL request".
* idrac_redfish_command: documentation language fix
Call it "HTTP request" and not "URL request".
* idrac_redfish_config: documentation language fix
Call it "HTTP request" and not "URL request".
* redfish_command: documentation language fix
Call it "HTTP request" and not "URL request".
* redfish_config: documentation language fix
Call it "HTTP request" and not "URL request".
* redfish_info: documentation language fix
Call it "HTTP request" and not "URL request".
* redfish_command: documentation language fix
Boot device should be two words.
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Remove support for the DLV record as the registry was decomissioned
The DLV registry was decomissioned in 2017 (https://www.isc.org/blogs/dlv/) so it's high time we remove support for DLV records.
* Remove DLV deprecation.
Co-authored-by: Felix Fontein <felix@fontein.de>
* Multiple modules using ModuleHelper
Replaced raising exception with calling method do_raise() in MH.
Removed the importing of the exception class.
* added changelog fragment
* Add RHEL 9.0 and FreeBSD 13.1 to CI.
* RHEL 9 has no pyOpenSSL apparently.
* Adjust URL for EPEL.
* Fix cargo install on FreeBSD 13.1.
* Add Ubuntu 22.04 and Fedora 36 to CI.
* Fix logic.
* filesystem: do not die output line does not contain ':'
* Skip django_manage tests on RHEL 9 as well.
* homectl tests don't work with RHEL 9.0.
* Improve error handling, improve fatresize output handling.
* Skip Fedora 36.
* Skip filesystem vfat tests on Ubuntu 22.04.
There, resizing fails with a bug:
Bug: Assertion (disk != NULL) at ../../libparted/disk.c:1620 in function ped_disk_get_partition_by_sector() failed.
* 'trusty' is 14.04. Adding 22.04 to skip list.
* Skip jail tests for FreeBSD 13.1.
* Add config for postgres on Ubuntu 22.04.
* Make CentOS 6 happy.
* Adjust postgres version.
* Try installing EPEL a bit differently.
* Skip ufw and iso_extract tests on RHEL 9.
* Skip odbc tests on RHEL 9.
* Skip RHEL 9.0 for snap tests.
* Add changelog fragment for filesystem code changes.
* Update lenovoxcc module for compatibility due to redfish spec changes the virtualMedia resource location from Managers to Systems
* Add changelogs fragment for PR 4682
* Update changelogs/fragments/4682-compatibility-virtualmedia-resource-location.yaml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Tami YY3 Pan <panyy3@lenovo.com>
Co-authored-by: Felix Fontein <felix@fontein.de>
* gitlab_hook: use empty string for non-existent attr in gitlab API response;
* gitlab_hook: use None for non-existent attr in gitlab API response;
* gitlab_hook: use None for non-existent attr in gitlab API response - add changelog fragment;
* gitlab_hook: update changelog fragment for #4668
* Update changelogs/fragments/4668-gitlab_hook-use-None-for-non-existent-attr.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* Remove unsupported and unnecessary --no-emoji option
`--no-emoji` causes errors in Yarn 2+ and should be unnecessary in Yarn 1.x; Yarn 1.x should only use emoji on supported interactive terminals.
* Add changelog fragment
* Update changelogs/fragments/4662-yarn-emoji.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update changelogs/fragments/4662-yarn-emoji.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Set firstrun to avoid use before definition
At the moment if zypper updates itself the parse_zypper_xml function
calls itself with packages not None, but in check_mode zypper still
needs to update itself -> rc = 103 and firstrun is undefined
* Add changelog frament
* Update changelogs/fragments/4651-zypper-checkmode-fix.yaml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Georg Vogt <georg.vogt@tngtech.com>
Co-authored-by: Felix Fontein <felix@fontein.de>
* ModuleHelper: added a do_raise() method to MH base class
* added changelog fragment
* Update changelogs/fragments/4660-mh-added-do-raise.yaml
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/module_utils/mh/base.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* using do_raise in CmdMixin
* simplified do_raise()
Co-authored-by: Felix Fontein <felix@fontein.de>
* rax_files_objects: refactoring
- simplifications
- use of comprehensions
- better use of exceptions
- improvements on the documentation blob
- src and dest mutually exclusive in module definition
* added changelog fragment
* Update plugins/modules/cloud/rackspace/rax_files_objects.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* rollback of mutually_exclusive
Co-authored-by: Felix Fontein <felix@fontein.de>
* Get first found configuration file
There are three valid places to get the configuration.
https://developer.1password.com/docs/cli/about-biometric-unlock#remove-old-account-information
* Use common config class
* Add changelog fragment
* Explicitly use new style classes for Python 2.7 compatibility
This shouldn’t matter for lookups, but does matter for module_utils
and modules since Python 2.7 is still supported on the managed node.
* Update changelogs/fragments/4065-onepassword-config.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* ModuleHelper module util: delegates unknown attributes to AnsibleModule
* added changelog fragment
* delegate only a few selected attrs
* Update plugins/module_utils/mh/base.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update changelogs/fragments/4600-mh-delegate.yaml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* change list.copy() with list[:] for py2 compat in terraform module
* add changelog fragment
* Update changelogs/fragments/4621-terraform-py2-compat.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Inserted not supported in patch on some hardware
Signed-off-by: Adam Robinson <adarobin@umich.edu>
* return error for ilo4 options with no defaults
* Update changelog
Co-authored-by: Felix Fontein <felix@fontein.de>
* make virtual_media_insert_via_patch backwards compatible
Co-authored-by: Felix Fontein <felix@fontein.de>
* remove ilo 4 specific properties check
* return ExtendedInfo as a string if no Message
* only worry about Inserted and WriteProtected
* update changelog
* fix for PEP8
* fix up comments
* fix VirtualMediaEject for iLO4 as well
* update changlog
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Add docs for ansible-core 2.13 use
local testing shows fine, adding here as example for other filters/tests
* Update plugins/filter/random_mac.py
* Improve docs.
* Remove wrong 'positional'.
Co-authored-by: Felix Fontein <felix@fontein.de>
* Add 'activate' parameter for alternatives
Allow alternatives to be installed without being set as the current
selection.
* add changelog fragment
* Apply suggestions from code review
Co-authored-by: Felix Fontein <felix@fontein.de>
* rename 'activate' -> 'selected'
* rework 'selected' parameter -> 'state'
* handle unsetting of currently selected alternative
* add integration tests for 'state' parameter
* fix linting issues
* fix for Python 2.7 compatibility
* Remove alternatives file.
Co-authored-by: Felix Fontein <felix@fontein.de>
* Parse lxc key from api data for lxc containers
When configuring containers in the `/etc/pve/lxc/` file, the API
adds a 'lxc' key that caused the plugin to crash as it tried to
split a list on ','.
This commit introduces logic to convert the list of lists in the
returned data to a dict as with the other keys.
```
'lxc': [['lxc.apparmor.profile', 'unconfined'],
['lxc.cgroup.devices.allow', 'a']]
```
becomes
```
"proxmox_lxc": {
"apparmor.profile": "unconfined",
"cap.drop": "",
"cgroup.devices.allow": "a"
}
```
* Add changelog fragment
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Philippe Pepos Petitclerc <peposp@gmail.com>
Co-authored-by: Felix Fontein <felix@fontein.de>
* initial commit, passing unit tests
* passing one very silly integration test
* multiple changes:
- updated copyright year
- cmd_runner
- added fmt_optval
- created specific exceptions
- fixed bug in context class where values from module params were not
being used for resolving cmd arguments
- changed order of class declaration for readability purpose
- tests
- minor improvements in integration test code
- removed some extraneous code in msimple.yml
- minor improvements in unit tests
- added few missing cases to unit test
* multiple changes
cmd_runner.py
- renamed InvalidParameterName to MissingArgumentFormat
- improved exception parameters
- added repr and str to all exceptions
- added unpacking decorator for fmt functions
- CmdRunner
- improved parameter validation
- _CmdRunnerContext
- Context runs must now pass named arguments
- Simplified passing of additional arguments to module.run_command()
- Provided multiple context variables with info about the run
Integration tests
- rename msimple.py to cmd_echo.py for clarity
- added more test cases
* cmd_runner: env update can be passed to runner
* adding runner context info to output
* added comment on OrderedDict
* wrong variable
* refactored all fmt functions into static methods of a class
Imports should be simpler now, only one object fmt, with attr access to all callables
* added unit tests for CmdRunner
* fixed sanity checks
* fixed mock imports
* added more unit tests for CmdRunner
* terminology consistency
* multiple adjustments:
- remove extraneous imports
- renamed some variables
- added wrapper around arg formatters to handle individual arg ignore_none behaviour
* removed old code commented out in test
* multiple changes:
- ensure fmt functions return list of strings
- renamed fmt parameter from `option` to `args`
- renamed fmt.mapped to fmt.as_map
- simplified fmt.as_map
- added tests for fmt.as_fixed
* more improvements in formats
* fixed sanity
* args_order can be a string (to be split())
and improved integration test
* simplified integration test
* removed overkill str() on values - run_command does that for us
* as_list makes more sense than as_str in that context
* added changelog fragment
* Update plugins/module_utils/cmd_runner.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* adjusted __repr__ output for the exceptions
* added superclass object to classes
* added additional comment on the testcase sample/example
* suggestion from PR
Co-authored-by: Felix Fontein <felix@fontein.de>
* Allow restoring of snapshots
* Fix formatting
* Add documentation for new feature
* Revert unrelated reformatting
* Add documentation for snapshot change
* Remove redundant multiple call to status API
* Remove unneccesary indent
* Add documentation for timeout fix
* Update changelog fragment to reflect real changes
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update changelog fragment to reflect real changes
Co-authored-by: Felix Fontein <felix@fontein.de>
* Add Tests for Snapshot rollback
* Update tests/unit/plugins/modules/cloud/misc/test_proxmox_snap.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update changelogs/fragments/4377-allow-proxmox-snapshot-restoring.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/cloud/misc/proxmox_snap.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* nmcli: Deprecate default hairpin mode
Deprecate the default hairpin mode for a bridge.
Plain nmcli/bridge tools defaults to no, but for some reason ansible
defaults to yes.
We deprecate the default value so we can switch to default 'no' in
ansible 6.0.0
* Code review fixes
Co-authored-by: Felix Fontein <felix@fontein.de>
* Fix comments
* Update changelogs/fragments/4320-nmcli-hairpin.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update changelogs/fragments/4320-nmcli-hairpin.yml
Co-authored-by: Alexei Znamensky <103110+russoz@users.noreply.github.com>
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Alexei Znamensky <103110+russoz@users.noreply.github.com>
* Implement contructable support for opennebula inventory plugin: keyed_groups, compose, groups
* Fixed templating mock issues in unit tests, corrected some linting errors
* trying to make the linter happy
* Now trying to make python2.7 happy
* Added changelog fragment
* changelog fragment needs pluralization
* Update changelogs/fragments/4524-update-opennebula-inventory-plugin-to-match-documentation.yaml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* pacman: Fix removing locally installed packages
Without this, using `absent` state for a locally installed package (for example from AUR, or from a package that was dropped from repositories) would return that package is already removed, despite remaining installed
* Undo unwanted whitespace removal
* Add changelog fragment
* Update changelogs/fragments/4464-pacman-fix-local-remove.yaml
Co-authored-by: Felix Fontein <felix@fontein.de>
* Add test.
Co-authored-by: Felix Fontein <felix@fontein.de>
If `all=True` is not set then by default only 20 records will be
returned when calling `list()`. Use `all=True` so that all records
will be returned.
For the `list()` use where do not desire to retrieve all entries then
use`all=False` to show explicityly that we don't want to get all of
the entries.
Fixes: #3729Fixes: #4460
* Adds optional `-upgrade` flag to terraform init.
This allows Terraform to install provider dependencies into an existing project when the provider constraints change.
* fix transposed documentation keys
* Add integration tests for terraform init
* Revert to validate_certs: yes for general public testing
* skip integration tests on irrelevant platforms
* skip legacy Python versions from CI tests
* add changelog fragment
* Update plugins/modules/cloud/misc/terraform.py
Adds version_added metadata to the new module option.
Co-authored-by: Felix Fontein <felix@fontein.de>
* Change terraform_arch constant to Ansible fact mapping
* correct var typo, clarify task purpose
* Squashed some logic bugs, added override for local Terraform
If `existing_terraform_path` is provided, the playbook will not download Terraform or check its version.
I also tested this on a local system with Terraform installed, and squashed some bugs related to using of an
existing binary.
* revert to previous test behavior for TF install
* readability cleanup
* Update plugins/modules/cloud/misc/terraform.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Only get monitor if it is not null api response
* Add changelog fragment
* Update changelogs/fragments/4459-only-get-monitor-if-it-is-not-null-api-response.yaml
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/net_tools/dnsmadeeasy.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: drevai <revai.dominik@gravityrd.com>
Co-authored-by: Felix Fontein <felix@fontein.de>
* add support for datadog monitors of type event-v2
See https://docs.datadoghq.com/events/guides/migrating_to_new_events_features/
* add changelog fragement for PR
* typos
* add link to PR
* minor_fetaure, not bugfix
* add to description when we added event-v2 type
* Update changelogs/fragments/4457-support-datadog-monitors-type event-v2.yaml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Add error handling to check correct SDK version installed
* Fix CI errors
* Added changelog fragment
* Changed exeption type
* Update changelogs fragment
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* fixed issue with specified package versions
zypper.py was doing nothing on state=present, when ALL requestet/checked packages had a specific version stated. This was caused by get_installed_state() being called with an empty package list, which in this case returns information about all ALL installed packages. This lead to an exessive filter list prerun_state, essentially removing all packages that are installed in ANY version on the target system from the request list.
* Create 4421-zypper_package_version_handling_fix
added changelog fragment for https://github.com/ansible-collections/community.general/pull/4421
* Delete 4421-zypper_package_version_handling_fix
* Create 4421-zypper_package_version_handling_fix.yml
* added templating to the url, user, and password
* added changelog fragment
* typo in description for url, and password
* clarify in the changelog what can you change
* update documentation and added an example
* missing quote from examples
* Apply suggestions from code review
Changed to I for option names
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/inventory/proxmox.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* fix: missing `validate_certs` parameters for `open_url` calls
As stated in the documentation, the `validate_certs` parameter can be
used to verify (or not) the TLS certificates. But, for some modules (at
least for the `keycloak_authentication` module), this parameter is not
used with the `open_url` function.
* add changelog fragment
* Update changelogs/fragments/4382-keycloak-add-missing-validate_certs-parameters.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Laurent Meunier <lme@atolcd.com>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Proxmox inventory plugin - Fix tags parsing
* In some cases the Proxmox API returns a tags string that consists in
a single space. The Proxmox inventory plugin parsed that into a
single, empty tag. Stripping the initial string then checking
whether it actually contains something fixes that.
* Do not call `_to_safe` on the concatenation of a known safe string
and a string that was already made safe.
* Changelog fragment for Proxmox inventory plugin tags fix
* Proxmox inventory plugin - Include link to PR in fragment
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* feat: sudoers module supports runas parameter with default of root
* fix: sudoers tests now pass
* chore: add changelog fragment for 4380
* fix: runas feature now a non-breaking change wh no def with no default
* fix: no trailing space in sudoers.py
* Update plugins/modules/system/sudoers.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* plugins/inventory/lxd.py: fix listing of containers without os / release
In some cases, a container might be present, that was initialized empty, therefore lacking meta information about the os or the release.
Test if the data entry is None to avoid calling lower on it.
* Update plugins/inventory/lxd.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/inventory/lxd.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Create 4351-inventory-lxd-handling_metadata_wo_os_and_release.yml
* fix yaml readability of changelog fragment
* Update changelogs/fragments/4351-inventory-lxd-handling_metadata_wo_os_and_release.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Malte Kuhn <mkuhn@maxcluster.de>
* Proxmox inventory plugin - Fix string to dict conversion (#4348)
* Re-use the (defined but unused) `plaintext_configs` variable to list
configuration entries that should be ignored by the string to
dictionary conversion code. At this point, it only contains the
`description` string.
* Convert to a dictionary if the all substrings obtained by splitting
off the initial value with commas contain a `=` character
* Limit substring splitting to a single split, so that a substring
containing `a=b=c` will generate an `a` entry with value `b=c`.
* Added changelog fragment for PR #4349
* Fix changelog fragment for #4349
* Proxmox inventory plugin - Initial implementation of filters
* This is an attempt at implementing something that would satisfy
issue #3553
* A rather massive code rewrite was needed as adding the host to the
inventory, setting its variables and adding it to various groups
used to be done as soon as the information became available. This is
not possible when it is not known whether the host should be added
to the inventory before all data has been gathered.
* The code for both LXC containers and Qemu VMs was refactored into a
single loop.
* Helper functions to generate group and fact names were added.
* Proxmox inventory plugin - Warnings for filter errors
* When an error occurs while compositing a filter's value and strict
mode is disabled, display a warning.
* Proxmox inventory plugin - Fixed pool groups building
* Hosts that were excluded by the host filters were still being added
to pool groups, causing errors.
* Proxmox inventory plugin - Refactoring
* Split off the VM/container handling code from the
`_populate()` method
* Split off pool group attribution from the `_populate()` method
* Proxmox inventory filters - Changelog fragment
* proxmox inventory - Simplify _can_add_host() method
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* ldap_entry - Recursive deletion
* Recursive deletion can be enabled with the `recursive` option. It is
disabled by default.
* When enabled, deletion is attempted by sending a single delete
request with the Subtree Delete control. If that request fails with
the `NOT_ALLOWED_ON_NONLEAF` error, try deleting the whole branch in
reverse order using individual delete requests.
* ldap_entry recursive deletion - Changelog fragment
* ldap_entry - Refactored to avoid lint message
* Update changelogs/fragments/4355-ldap-recursive-delete.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* ldap_entry - Add version_added to the recursive flag
Co-authored-by: Felix Fontein <felix@fontein.de>
* ldap_entry - Moved member assignment to a more suitable location
Co-authored-by: Felix Fontein <felix@fontein.de>
* Implement change detection for update_cache=true. Add cache_updated return value.
* ...
* Make sure pacman --sync --list is called only as often as necessary.
* Fix linode inventory filtering
There was a regression introduced in the addition of caching. The
`_consume_options` method was added and provided the `config_data`
dictionary. This `pop`s every entry, resulting in an empty `config_data`
dict, which was then reused and expected to be populated.
After reviewing, `_consume_data` doesn't need to be called. Also, once
the ``_read_config_data` method has been called, we no longer need the
config_data dict, and can instead use the `get_option` method throughout.
Once those were removed, the filtering function seemed a bit odd, since
we were no longer using the file. I used that opportunity to move the
filter calls into the populate function directly.
* Remove tests that target removed methods
This removes tests that targeted some custom methods on configuration
file handling. These are no longer necessary since they are now handled
by the BaseInventoryPlugin `_read_config_data` method.
* Add changelog entry for linode inventory bugfix
* Revert filters back to their own method
This moves filters back into their own method, but now uses the
get_option calls to pull filter configuration items.
* jira: Use fields in comment to merge in additional data
* changlog fragment added
* Update changelogs/fragments/4304-jira-fields-in-comment.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* updated fields documentation
* Update plugins/modules/web_infrastructure/jira.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Add tls parameter to redis module
* Rename changelog fragment to match PR
* Apply suggestions from code review
Co-authored-by: Felix Fontein <felix@fontein.de>
* Port redis module to redis auth module util
* Update changelogs/fragments/4207-add-redis-tls-support.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/database/misc/redis.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Undo reuse of redis auth doc fragment
* Use doc fragment.
Co-authored-by: Julian Faude <julian.faude@zweiacht.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* npm - add '--production` support to 'npm ci' flag
* add changelog fragement for 4299
* Add backticks
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* pacman: add support for remove_nosave
New parameter: remove_nosave
When enabled, will pass --nosave to pacman when removing packages.
--nosave cannot be used with --print-format and thus it couldn't be
passed via extra_args. See #4315
The code adds the option right before the actual removal of the pkgs.
(This is based on an initial diff from MorphBonehunter)
* changelog
* Update plugins/modules/packaging/os/pacman.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* wording
* ssss
* remove_package: simplify {force,extra,nosave}_args
Co-authored-by: Felix Fontein <felix@fontein.de>
* pacman: don't always return changed w/ update_cache
This used to be the behavior before the recent refactoring. [1]
Allows the following to return changed only when packages were upgraded:
- pacman:
update_cache: yes
upgrade: yes
And the following to return changed only when the foo package wasn't at
the latest version:
- pacman:
name: foo
state: latest
update_cache: yes
[1] https://github.com/ansible-collections/community.general/pull/3907
* Update changelogs/fragments/4318-pacman-restore-old-changed-behavior.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Remove nmcli modify dependency on type parameter
* Add fragment
* Add newline for lint
* Fixed linting for tests
* Fix fragment
* Move aliases to ip_conn_type function
* Remove connection_map
* Updated fragment
* Fixed fragment
Co-authored-by: Trey West <--local>
* s/group/groups/
Pacman accepts --group but the actual option name is --groups.
Allows use of other binaries with the same CLI interface as pacman (yay)
* changelog
* Apply suggestions from code review
Co-authored-by: Felix Fontein <felix@fontein.de>
* Add note regarding pacman compat + --print-format
* Update plugins/modules/packaging/os/pacman.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Fix error when checking if VM exists.
* Add changelog entry.
* Reword changelog entry.
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* pacman: re-adding support for URL based pkgs
* Update plugins/modules/packaging/os/pacman.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/packaging/os/pacman.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* cmd=cmd in every call to self.fail()
* pacman: integration test for mixed pkg sources
* Add more tests + fix minor bug with URL packages
Version checking for URL packages is left to pacman, so add a check
after the dry run to see if it would actually install anything.
* remove double templating
Co-authored-by: Felix Fontein <felix@fontein.de>
* zypper: support automatic removal of orphaned dependencies
* zypper: support automatic removal of orphaned dependencies
- Add support for --clean-deps option during package removal, which
will clean up packages that were only installed as dependencies
of the package being removed.
* Update changelogs/fragments/4192-zypper-add-clean-deps.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/packaging/os/zypper.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/packaging/os/zypper.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* fix sparse file creation on Alpine linux
* re-enable tests for Alpine
* remove `conv=sparse` flag (rely only on `seek=fullsize` & `count=0`)
* doc: add a reference to busybox's dd
* doc: remove restrictions for OpenBSD, Solaris & AIX (should work as
for Alpine linux now)
* add a changelog fragment
* fix typo
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* keycloak: fix creating a user federation w/ idempotent id
Creating a user federation while specifying an id (that doesn't exist
yet) will fail with a 404. This commits fix this behavior.
* keycloak: fix user federation mapper duplication
This commit fixes a bug where mappers are duplicated instead of
configured when creating a user federation.
When creating a user federation, some mappers are autogenerated by
keycloak. This commit lets the keycloak_user_federation module recompute
mappers final values after the user federation is created so that the
module can try to merge them by their name.
* add missing fragment for pr #4212
* passwordstore: Add configurable locking
Passwordstore cannot be accessed safely in parallel, which causes
various issues:
- When accessing the same path, multiple different secrets are
returned when the secret didn't exist (missing=create).
- When accessing the same _or different_ paths, multiple pinentry
dialogs will be spawned by gpg-agent sequentially, having to enter
the password for the same gpg key multiple times in a row.
- Due to issues in gpg dependencies, accessing gpg-agent in parallel
is not reliable, causing plays to fail (this can be fixed by adding
`auto-expand-secmem` to _~/.gnupg/gpg-agent.conf_ though).
These problems have been described in various github issues in the past,
e.g., ansible/ansible#23816 and ansible/ansible#27277.
This cannot be worked around in playbooks by users in a non-error-prone
way.
It is addressed by adding new configuration options:
- lock:
- readwrite: Lock all operations
- write: Only lock write operations (default)
- none: Disable locking
- locktimeout: Time to wait for getting a lock (s/m/h suffix)
(defaults to 15m)
These options can also be set in ansible.cfg, e.g.:
[passwordstore_lookup]
lock=readwrite
locktimeout=30s
Also, add a note about modifying gpg-agent.conf.
* Tidy up locking config
There is no reason why lock configuration should be part of self.paramvals.
Now locking and its configuration happen all in one place.
* Change timeout description wording to the suggested value.
* Rearrange plugin setup, apply PR feedback
