* zfs.py: treated received properties as local and added diff mode support
If you use "zfs set" to explicitly set ZFS properties, they are marked as from source "local". If ZFS properties are implicitly set by using "zfs send" and "zfs receive", for example as part of a template based installation, they are marked as from source "received". But as there is no technical difference between both types of them, the “received” ZFS properties should also be considered “local”. Otherwise Ansible would detect changes, which aren’t actual changes. Therefore I changed line 202/207 to reflect this.
For us it’s quite important, that Ansible modules support the diff mode in order to qualify changes. Therefore I added some code lines to address this.
* added changelog fragment for PR #502
* fixed typos in changelog fragment for PR #502
* minor changes in changelog fragment for PR #502
* added link to pull request in changelog fragment for PR #502
* extended the diff data structure to always include the name of the zfs filesystem
* added code to also maintain the diff data structure after a change
* reverted back some code lines for better code readability
* added an extra dict in the diff data structure to hold the zfs properties
(cherry picked from commit baa721ac22)
Co-authored-by: froebela <32922546+froebela@users.noreply.github.com>
* udm_dns_record: Fix handling of PTR records (#3244)
Before, it was not possible to manage PTR records in Univention DNS,
due to broken zone lookups and improper used parameters of the object.
This patch fixes the PTR handling, allowing both v4 and v6 entries.
* udm_dns_record: [doc] add changelog fragment
* udm_dns_record: [fix] validation errors
* udm_dns_record: import ipaddress module conditionally (#3244)
* udm_dns_record: fix sanity check error, improve doc (#3244)
* udm_dns_record: Improve changes to meet community standards (#3244)
(cherry picked from commit d9dcdcbbe4)
Co-authored-by: Sebastian Damm <SipSeb@users.noreply.github.com>
* snap - improved error handling
* added changelog fragment
* removed experiments left overs
* rolled back the smaller list of params for commands other than install
(cherry picked from commit a91eb6ae4f)
Co-authored-by: Alexei Znamensky <103110+russoz@users.noreply.github.com>
* Fixed incorrect VMID: cloning to an existing VM
During a cloning operation, if the destination VM already exists the VMID returned is not correct.
The VMID returned should be that of the destination VM and not that of the source VM (consistent with line 1230).
A playbook that relies on the returned VMID, for example, to perform other operations on the destination VM, will not work properly if it is unexpectedly interrupted.
* Add files via upload
* moved 3266-vmid-existing-target-clone.yml to changelogs/fragments/
replaced line separator CRLF -> LF
* storing vmid list in variable to avoid multiple API calls
(cherry picked from commit 4e2d4e3c68)
Co-authored-by: Atlas974 <43972908+Atlas974@users.noreply.github.com>
* Linode Inventory can use full IP data from APIv4
- The Linode dynamic inventory module does not currently distinguish
between private and public IP addresses even though the Linode APIv4
contains this information. This change keeps the current behavior as
the default and adds an option to set `ip_style: api`. When set, this
option allows administrators to differentiate between private, public,
slaac, local_link, and pool network addresses providing a more nuanced
and granular view of the remote host's network information.
Signed-off-by: Kellin <kellin@retromud.org>
* Review - amend changelog details
- Adds a link back to this pull request
- Uses markdown styles for easier to read publishing in the changelogs
- Amends the wording style to match the existing changelog styles
Co-authored-by: Felix Fontein <felix@fontein.de>
* Add scope to example invocation
- Adds the `community.general` scope to invocation example
Co-authored-by: Felix Fontein <felix@fontein.de>
* Convert lamda to list comprehension
- Change the ip type filter from a lambda to a list comprehension
Co-authored-by: Felix Fontein <felix@fontein.de>
* Add punctuation to description sentence
- Adds a period to the end of the description sentence
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
(cherry picked from commit e77adff0b7)
Co-authored-by: Kellin <kellin@retromud.org>
If `api_token` is not set and config file exists, it will try to fetch
the value from the activated profile and fallback on default.
This should not break existing workflows.
(cherry picked from commit cc458f7c37)
Co-authored-by: Nicolas Karolak <nikaro@users.noreply.github.com>
* Add option for retry_servfail
cf. https://dnspython.readthedocs.io/en/latest/resolver-class.html#dns.resolver.Resolver.retry_servfail
Setting this option to `True` allows for the possibility of the lookup plugin to retry and thereby recover from potentially transient lookup failures, which would otherwise cause the task or play to bail with an unrecoverable exception.
* Create 3247-retry_servfail-for-dig
* documentation for `retry_servfail` option
* Rename 3247-retry_servfail-for-dig to 3247-retry_servfail-for-dig.yaml
* fix whitespace
* Update plugins/lookup/dig.py
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
* Update plugins/lookup/dig.py
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
* rm try/except block
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
(cherry picked from commit 23e7ef0255)
Co-authored-by: Matt 'Archer' Vaughn <nethershaw@gmail.com>
* nmcli: Disallow Wi-Fi options not supported by nmcli
By querying nmcli directly
* Added changelog fragment
* Added tests
* Simplify `get_available_options()`
* Update changelogs/fragments/3141-disallow-options-unsupported-by-nmcli.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* Remove redundant `802-11-wireless` settings from test show outputs
* Update `mocked_wireless_create(mocker)`
* Update plugins/modules/net_tools/nmcli.py
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
* Address comment re. creating function & use nmcli naming conventions
I.E. `setting`.`property` = `value`
```
nmcli> help set
set [<setting>.<prop> <value>] :: set property value
This command sets property value.
Example: nmcli> set con.id My connection
```
* Added `ignore_unsupported_suboptions` option & improved `wifi(_sec)` doc
* Corrected pep8 issues
```
ERROR: Found 2 pep8 issue(s) which need to be resolved:
ERROR: plugins/modules/net_tools/nmcli.py:342:161: E501: line too long
(236 > 160 characters)
ERROR: plugins/modules/net_tools/nmcli.py:359:161: E501: line too long
(237 > 160 characters)
```
* Fixed remaining sanity check issues and added even more docs
* No need to split Note
* Update plugins/modules/net_tools/nmcli.py
3.5.0 has already been released.
Co-authored-by: Felix Fontein <felix@fontein.de>
* Followed uniformity guideline for format macros from Ansible's dev guide
* Addressed comment
https://github.com/ansible-collections/community.general/pull/3141#discussion_r689098383
* Documentation cleanup continuation
* Replace `NM_SETTING_*`s having a description with their numeric value
* Splitting up long paragraphs.
Also removed `wifi`.`seen-bssids` as it "`is only meant for reading`"
* Addressed remaining comments and clarified `wake-on-lan` note
* Update plugins/modules/net_tools/nmcli.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/net_tools/nmcli.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/net_tools/nmcli.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/net_tools/nmcli.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Finishing addressing documentation comments.
* Update plugins/modules/net_tools/nmcli.py
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
* Update plugins/modules/net_tools/nmcli.py
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
* Update nmcli.py
* Added wifi-related `list` type options to `settings_type` method
* Moved `edit_commands` `execution` logic into its own method
* Move `unsupported_property` deletion into `main` function
* Missing `.items()`
* Resolved missing proper `nmcli conn edit` arguments
* Resolve pylint issue `dangerous-default-value`
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
Co-authored-by: David Hummel <dhummel@Fingerling>
(cherry picked from commit 8a62b79ef2)
Co-authored-by: David Hummel <6109326+hummeltech@users.noreply.github.com>
Use DomainPasswordGrantAuthorizer if parameter `domain` is used.
(cherry picked from commit bcccf4e388)
Co-authored-by: Martin Vician <vician@users.noreply.github.com>
* redfish_info: Include Status property for GetChassisThermals
Include Status property for Thermal objects when querying Thermal properties
via GetChassisThermals command.
FIXES#3232
* fixup for rename of fragments file
* Update changelogs/fragments/3233-include-thermal-sensor-status-via-redfish_info.yaml
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
(cherry picked from commit c7fccb2c01)
Co-authored-by: Jacob <jyundt@gmail.com>
* Added fix for bug report in issue #3192
* Added changelog fragment
* Typo fix
* Added Importerror to exception - as req by linters
* Moved the conditional import statement to try/except block
(cherry picked from commit 6ac410b3f6)
Co-authored-by: Ricky White <ricky@whitelionmedia.com>
* module_helper - implemented classmethod to start the module plus minor change
* rolled back the __changed__() method
* added changelog fragment
* Update plugins/module_utils/mh/base.py
Co-authored-by: Sviatoslav Sydorenko <wk.cvs.github@sydorenko.org.ua>
* no capt Piccards allowed in the base class
* removed extra piccards
Co-authored-by: Sviatoslav Sydorenko <wk.cvs.github@sydorenko.org.ua>
(cherry picked from commit 41101e55a0)
Co-authored-by: Alexei Znamensky <103110+russoz@users.noreply.github.com>
- Fix a typo in the Linode inventory plugin unit tests
- Fix some style issues in descriptions where punctuation was missing
Signed-off-by: Kellin <kellin@retromud.org>
(cherry picked from commit fccae19177)
Co-authored-by: Kellin <kellin@retromud.org>
* refactor to vdo
* adjusted if condition
* added changelog fragment
* Update plugins/modules/system/vdo.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* adjustements per the PR
* more occurrences of bool compared with yes or no
* Update changelogs/fragments/3191-vdo-refactor.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
(cherry picked from commit 16945d3847)
Co-authored-by: Alexei Znamensky <103110+russoz@users.noreply.github.com>
* Add ipv4 example to linode inventory
* Update plugins/inventory/linode.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
(cherry picked from commit 432c891487)
Co-authored-by: Paul Hauner <paul@paulhauner.com>
* ini_file - prepare for fixing #273
- restructure tests
- fix error message call: fail_json() takes 1 positional argument but 2 were given
* ini_file - multiple values for one option (#273)
- add module option 'exclusive' (boolean) for the abbility to add
single option=value entries without overwriting existing options
with the same name but different values
- add abbility to define multiple options with the same name but
different values
* ini_file - add more tests for ini_file
* ini_file - fix sanity tests
* apply suggested changes:
- rename 03-regressions.yml to 03-encoding.yml
- fix typos
- fix documentation
* apply suggested changes:
- test errors also for result is failed
* apply suggested changes:
- make state=absent also work with module option exclusive
- add more tests for state=absent and module option exclusive
* fix sanity test:
- 02-values.yml:251:9: hyphens: too many spaces after hyphen
* apply proposed changes
* apply proposed changes from review
- adjust version_added to 3.6.0
- small syntax change in changelog fragment
(cherry picked from commit 25267b8094)
Co-authored-by: Daniel Ziegenberg <daniel@ziegenberg.at>
* Fix new devel sanity errors. (#3194)
(cherry picked from commit 1fec1d0c81)
* Add two more.
* Fix PR #.
Co-authored-by: Felix Fontein <felix@fontein.de>
* zypper: support transactional-updates
- Check if transactional updates are in use by checking for the
existence of /var/lib/misc/transactional-update.state
- Prefix zypper-commands with /sbin/transactional-update --continue --drop-if-no-change --quiet run
if this is the case
fixesansible-collections/community.general#3159
* re-add get_bin_path for executables
* fix typo
(cherry picked from commit 6033ce695b)
Co-authored-by: Sebastian <sebix@sebix.at>
* Support older version of psutil (RHEL7 and RHEL6)
The psutil python module is a true mess, they changed the API twice. The function arguments, as well as the objects that are returned.
The documentation does not make it clear which version supports what so the safest implementation is this waterfall approach.
A better approach would be to inspect the returned information, rather than trust a version, but that would not be any more efficient.
In the end it is better to have something that at least works out-of-the-box on all platforms than something that requires custom updates to system packages before it works as expected. Especially for something as basic as `pids`.
* A little bit more concise
* Apply suggestions from code review
* Add changelog fragment.
Co-authored-by: Felix Fontein <felix@fontein.de>
(cherry picked from commit b5d6457611)
Co-authored-by: Dag Wieers <dag@wieers.com>
When a package name contains special characters (e.g. "g++"), they are
interpreted as part of the regexp.
This can lead to a crash with an error in the python re module, for
instance with "g++":
sre_constants.error: multiple repeat
Fix this by escaping the package name.
Co-authored-by: Baptiste Jonglez <git@bitsofnetworks.org>
(cherry picked from commit 56b5be0630)
Co-authored-by: zorun <github@bitsofnetworks.org>
* fix empty-value vs. no-value inconsistency
* rename changelog fragment
* tests: omit value where there should be no value
* add integration tests
(cherry picked from commit 2831bc45f5)
Co-authored-by: quidame <quidame@poivron.org>
* nmcli: use `stdin` for setting private `wifi_sec` options
I.E.:
* `802-11-wireless-security.leap-password`
* `802-11-wireless-security.psk`
* `802-11-wireless-security.wep-key0`
* `802-11-wireless-security.wep-key1`
* `802-11-wireless-security.wep-key2`
* `802-11-wireless-security.wep-key3`
* Changelog fragement formatting.
* Update changelogs/fragments/3160-pass-wifi-secrets-via-stdin-to-nmcli-module.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* Make `wifi_sec_secret_options()` into a constant
* Minor cleanup
`'set ' + key + ' ' + value`
=>
`'set %s %s' % (key, value)`
* Change `casing`
* Change `WIFI_SEC_SECRET_OPTIONS` from `list` to `tuple`
* Update `edit_connection()` to not reset `edit_commands`
It will just re`set` them if `edit_connection()` is called more than
once.
* Do not call `edit_connection()` if `connection_update(*)` fails
* Fixed `pep8` issue `E713` in tests
`test for membership should be 'not in'`
* Simplify `create_connection()`/`modify_connection()` logic
* `WIFI_SEC_SECRET_OPTIONS`=>`SECRET_OPTIONS`, options are prefixed
* Moved `if key in self.SECRET_OPTIONS` into `if value is not None` check
We don't need to do anything is the value is None
Co-authored-by: Felix Fontein <felix@fontein.de>
(cherry picked from commit 7f96b7df60)
Co-authored-by: David Hummel <6109326+hummeltech@users.noreply.github.com>
* added the utf-8 marker
* fixed the utf-8 marker where it was missde before
(cherry picked from commit 771e9de010)
Co-authored-by: Alexei Znamensky <103110+russoz@users.noreply.github.com>
* Fixed `wifi_sec` option changes are not detected
Also updated `docs` URL and formatting to match that of the `wifi`
option
* Removed extraneous `appends` to `cmd` in `connection_update`
These really should have only been added to `connection_options` whose
return values get `extended` onto `cmd`
(cherry picked from commit 6bfa6e40f4)
Co-authored-by: David Hummel <6109326+hummeltech@users.noreply.github.com>
* pkgin: display stdout and stderr in case the error occurs
* Update changelogs/fragments/pkgin-output-after-error.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
(cherry picked from commit ff586f1105)
Co-authored-by: Bartosz <8199062+bartoszkosiorek@users.noreply.github.com>
* Updated the plugin to reflect breaking changes introduced in the underlying SDK v1.0.0 update.
* Added Changelog fragment
* Updates based on feedback/review
* Added newline to pass CI
* Added whitepace for linter
* Update changelogs/fragments/3139-tss-lookup-plugin-update-to-make-compatible-with-sdk-v1.yml
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
(cherry picked from commit a73720c103)
Co-authored-by: Ricky White <rickywhite@outlook.com>
* For #3134
Expose BootOverrideMode parameter to redfish_command to allow setting by user during run.
* Fix trailing whitespace
* Add changelog fragment to contribution.
* Update changelogs/fragments/3135-add-redfish_command-bootoverridemode.yaml
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/remote_management/redfish/redfish_command.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/remote_management/redfish/redfish_command.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/remote_management/redfish/redfish_command.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/remote_management/redfish/redfish_command.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update changelogs/fragments/3135-add-redfish_command-bootoverridemode.yaml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
(cherry picked from commit 75688cb632)
Co-authored-by: Scott Seekamp <sylgeist@users.noreply.github.com>
* added utf-8 markers to all .py files in plugins/{action,cache,callback}
* added utf-8 markers to all .py files in plugins/connection
* added utf-8 markers to all .py files in plugins/doc_fragments
(cherry picked from commit 73c27d6a0e)
Co-authored-by: Alexei Znamensky <103110+russoz@users.noreply.github.com>
* added utf-8 markers to all .py files in plugins/filter
* added utf-8 markers to all .py files in plugins/inventory
* added utf-8 markers to all .py files in plugins/lookup
(cherry picked from commit 047b7ada3c)
Co-authored-by: Alexei Znamensky <103110+russoz@users.noreply.github.com>
* report power state of host
* Modify sample information
* add changelog fragment
* apply feedback from github community
* apply feedback
Co-authored-by: Yvan E. Watchman <git@yvanwatchman.eu>
(cherry picked from commit 9ccce82113)
Co-authored-by: Yvan Watchman <ik@yvanwatchman.eu>
* multiple improvements
* added changelog fragment
* comment and name in int test files
* added notes to the documentation
* removed the extraneous changelog frag
* Update plugins/modules/web_infrastructure/apache2_module.py
* adjusted doc text for sanity check
* Update plugins/modules/web_infrastructure/apache2_module.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* removed extraneous dependency in integration test
Co-authored-by: Felix Fontein <felix@fontein.de>
(cherry picked from commit d9533c44aa)
Co-authored-by: Alexei Znamensky <103110+russoz@users.noreply.github.com>
* initial commit
* multiple changes:
- added a proper process_command_output()
- adjusted the output_params fields (and removed other *_params fields)
* added RETURN documentation, plus few adjustments
* fixed sanity tests
* updated BOTMETA.yml
* further adjustments
* integration tests - first commit
* removed unused files from integration test
* added role installation tests
* removed extraneous cmd line option
* added requirement-file installation tests
* adjusted documentation and output variable names
* fixed integration test
* Update plugins/modules/packaging/language/ansible_galaxy_install.py
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
* Update plugins/modules/packaging/language/ansible_galaxy_install.py
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
* Update plugins/modules/packaging/language/ansible_galaxy_install.py
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
* Update plugins/modules/packaging/language/ansible_galaxy_install.py
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
* Update plugins/modules/packaging/language/ansible_galaxy_install.py
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
* Update plugins/modules/packaging/language/ansible_galaxy_install.py
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
* Update plugins/modules/packaging/language/ansible_galaxy_install.py
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
* Update plugins/modules/packaging/language/ansible_galaxy_install.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update tests/integration/targets/ansible_galaxy_install/aliases
Co-authored-by: Felix Fontein <felix@fontein.de>
* Per comments in the PR:
- fixed missing paths case
- fixed install parsing (regexp) for ansible-galaxy collection install in v2.10
* changed the collection installed in test to something unlikely to come embedded in Ansible itself
* fixed logic for Ansible 2.9
* kill trailing whitespace
* changed default language from C.UTF-8 to en_US.UTF-8
* updated c.g version
* skipping test in python 2.6, as ansible-galaxy no longer supports it in devel
* Multiple changes:
- improved docs on ansible 2.9 and python 2.6
- removed method __changed__() - unnecessary since tracking changes in the ansible29_change var
- renamed methods __run29__() and __run210plus__() to __setup29__() and __setup210plus__(), respectively
- ansible 2.9 warning for requirements_file only when type is "both"
* sanity fix
* further adjustments
* removed extraneous doc
* changed method to determine remote ansible version
* do not allow type=both in Ansible 2.9
* Update plugins/modules/packaging/language/ansible_galaxy_install.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/packaging/language/ansible_galaxy_install.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* changed method names per PR
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
Co-authored-by: Felix Fontein <felix@fontein.de>
(cherry picked from commit 2935b011ed)
Co-authored-by: Alexei Znamensky <103110+russoz@users.noreply.github.com>
* minor refactoring in gunicorn module
* added changelog fragment
* reworked the gunicorn bin path part of the code, per PR
* Update changelogs/fragments/3092-gunicorn-refactor.yaml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
(cherry picked from commit 549dfaae64)
Co-authored-by: Alexei Znamensky <103110+russoz@users.noreply.github.com>
* django_manage - using list instead of string in run_command()
* added changelog fragment
(cherry picked from commit 0b70b3baff)
Co-authored-by: Alexei Znamensky <103110+russoz@users.noreply.github.com>
* import certificate+key bundle from pkcs12
* fix typo/syntax
* fix variable name
* fix passwords order and improve error handling
* add changelog fragment
* enter keystore pass only once if keystore already exists, and twice at creation
* nomalize tests
- Replace `command` tasks by dedicated (community.crypto) modules.
- Add spaces around jinja2 variable names.
- Call modules by their FQCNs.
* Add tests to check keystore has a private key
fix tests for RedHat/CentOS < 8 (run openssl command as an alternative to
`openssl_pkcs12` module)
(cherry picked from commit 21d5668c97)
Co-authored-by: quidame <quidame@poivron.org>
* Clone sucess should return new vm id, not id from cloned vm.
* add changelog fragment
* Update changelogs/fragments/3034-promox-kvm-return-new-id.yaml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Yvan E. Watchman <git@yvanwatchman.eu>
Co-authored-by: Felix Fontein <felix@fontein.de>
(cherry picked from commit ac03881002)
Co-authored-by: Yvan Watchman <ik@yvanwatchman.eu>
* Initial commit
* Fixing units and path joins
* Ensuring paths are consistently ordered
* Adding changelog fragment
* Using os.path.join to ensure trailing slashes are present
* optimizing use of root in add_targets
* Applying initial review suggestions
(cherry picked from commit 31189e9645)
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
* Fix
* fixed linter stuff
* typo in section name of changlog fragment
Co-authored-by: Max Bidlingmaier <Max-Florian.Bidlingmaier@sap.com>
(cherry picked from commit d057b2e3b2)
Co-authored-by: Max Bidlingmaier <maks@konsolan.de>
* Don't know why this works but it does.
Plugin was crashing on this line on Python 3.9.2 deployed on qemu image with debian bullseye. It doesn't crash anymore.
* Create 3052_proxmox_inventory_plugin.yml
* Update changelogs/fragments/3052_proxmox_inventory_plugin.yml
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
(cherry picked from commit 99c28313e4)
Co-authored-by: The Right Honourable Reverend <samueljsmith@gmail.com>
* Added module for creating protected branches
* Applied some changes due to comments and added a test that currently fails
* Changing no_access to nobody due to comment on PR
* Changing the description to clarify it a bit more
* Added working tests for module 'gitlab_protected_branch'
* Fixing lint issues
* Added doc that minimum of v2.3.0 is needed to work correctly
* Fixed the requirements notation
* Check the version of the module
* Hopefully fixed the tests by skipping it when lower version of 2.3.0 is installed
* Fix lint issues
* Applying changes due to comments in PR
* Remove commented code
* Removing the trailing dot ...
Co-authored-by: jenkins-x-bot <jenkins-x@googlegroups.com>
Co-authored-by: Werner Dijkerman <iam@werner-dijkerman.nl>
(cherry picked from commit 7734430f23)
Co-authored-by: Werner Dijkerman <werner@dj-wasabi.nl>
* https://github.com/ansible-collections/community.general/issues/3005
Bypass the boot device argument check when the command is: DisableBootOverride
as it isn't needed to perform this operation.
* Add changelog fragment
(cherry picked from commit ea822c7bdd)
Co-authored-by: Scott Seekamp <sylgeist@users.noreply.github.com>
* fixed pamd single line issue
* added changelog fragment
* supported case for 0 lines, improved test
(cherry picked from commit a3a40f6de3)
Co-authored-by: Alexei Znamensky <103110+russoz@users.noreply.github.com>
* added feature flag to control whether CmdMixin adds rc, out and err to the result of the module
* added changelog fragment
* changed from a global flag to parameters in run_command
* updated changelog
* fixed brainless copy-paste of yours truly
(cherry picked from commit c5cbe2943b)
Co-authored-by: Alexei Znamensky <103110+russoz@users.noreply.github.com>
* extend support for FreeBSD
* Check if FS exists with `fstyp` if `blkid` fails to find FS signature
(fix a potential data loss)
* Add support for FreeBSD special devices (character devices).
* Add support for FreeBSD native fstype (UFS).
* Update DOCUMENTATION accordingly.
* add/update integration tests
* Add tests for `fstype=ufs` on FreeBSD.
* Run `remove_fs` tests (`state=absent`) on FreeBSD.
* Run `overwrite_another_fs` tests on FreeBSD.
* add a changelog fragment
* fix indentation
* restrict new tests to regular files
* fix typo
* fix searching of providersize (block count)
* add '-y' option to growfs command
* remove references to versions older than the collection itself
* bump version adding new feats to 3.4.0
* reformat *collection* and *version added* for better DOCUMENTATION parsing
* skip tests for FreeBSD < 12.2
* run tests for FreeBSD >= 12.2
* re-enable tests for FreeBSD < 12.2 and give it a try with group1
* util-linux not available on FreeBSD < 12.2
(cherry picked from commit 9023d4dba1)
Co-authored-by: quidame <quidame@poivron.org>
* replaced use of expanduser() with value from HOME var
* fixed sanity check
* added changelog fragment
(cherry picked from commit 1990f79d8a)
Co-authored-by: Alexei Znamensky <103110+russoz@users.noreply.github.com>
* Remove necessities on password or token.
* Upper case letter -> Lower case letter
Co-authored-by: Amin Vakil <info@aminvakil.com>
* Documentation update.
* C -> I
Co-authored-by: Amin Vakil <info@aminvakil.com>
(cherry picked from commit d97a9b5961)
Co-authored-by: Tong He <68936428+unnecessary-username@users.noreply.github.com>
* Add authentication_flow_binding_overrides option to the keycloak_client module
* Add changelog fragment
* Update changelogs/fragments/2949-add_authentication-flow-binding_keycloak-client.yml
Co-authored-by: Amin Vakil <info@aminvakil.com>
* Update plugins/modules/identity/keycloak/keycloak_client.py
Co-authored-by: Amin Vakil <info@aminvakil.com>
* Update plugins/modules/identity/keycloak/keycloak_client.py
Co-authored-by: Amin Vakil <info@aminvakil.com>
* Add unit test authentication_flow_binding_overrides feature on keycloak_client module
Co-authored-by: Amin Vakil <info@aminvakil.com>
(cherry picked from commit 1b80a9c587)
Co-authored-by: Gaetan2907 <48204380+Gaetan2907@users.noreply.github.com>
* pacman: fix returned code when ignorepkg has been defined
* add changelog
* make ignored check preciser
(cherry picked from commit c0740ca398)
Co-authored-by: Amin Vakil <info@aminvakil.com>
* lvol: support check_mode on thinpool
* add changelog
* Add %s when needed
* correct changelog sentence
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
(cherry picked from commit b2b4877532)
Co-authored-by: Amin Vakil <info@aminvakil.com>
* fixed param order
* added changelog fragment
* rebased and uncommented tests per PR
* added /snap link in RH
* typo in tests
* Update tests/integration/targets/snap/tasks/default.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
(cherry picked from commit 9b02230477)
Co-authored-by: Alexei Znamensky <103110+russoz@users.noreply.github.com>
correctly handle cases where a dependency does not have a `version` property because it is either missing or invalid
(cherry picked from commit a0915036f9)
Co-authored-by: Shahar Mor <shaharmor1@gmail.com>
* Try some snap fixes.
* Fix logic.
* Try to run tests privileged.
* Prevent failure on rc != 0.
* Fix formatting.
* Revert "Try to run tests privileged."
This reverts commit 77ca91f502.
* Try to run tests on RHEL instead.
* Make sure that snapd is running.
* Add changelog fragment.
* str -> to_native.
* Make sure that installed binary is actually found.
* Add check mode tests.
* Mention #2835 in changelog fragment.
(cherry picked from commit c63dc624b7)
Co-authored-by: Felix Fontein <felix@fontein.de>
* Fix bug when 2 identical executions in same auth flow
* Add changelog fragment
* Fix unit tests
* Update changelogs/fragments/2904-fix-bug-when-2-identical-executions-in-same-auth-flow.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
(cherry picked from commit 0e829e6a23)
Co-authored-by: Gaetan2907 <48204380+Gaetan2907@users.noreply.github.com>
* uncoupled updates_url from plugin download urls
added new parameters: versioned_plugins_url, latest_plugins_url
* parameters updates_url, latest_plugins_url and versioned_plugins_url changed type to list of strings to implement fallback URLs usage
added type conversion if they are string (backward compatibility)
* removed type conversion this is handled by ansible validation
fix: dont fail if first url fails
* added fallback: if installation from plugin manager fails, try downloading the plugin manually
* fixed test failures
* PEP8 indent fix
* changelog fragment
* added debug outputs for new url fallback behavior
* added version_added in description for latest_plugins_url
Co-authored-by: Felix Fontein <felix@fontein.de>
* added version_added in description for versioned_plugins_url
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update changelogs/fragments/1334-jenkins-plugin-fallback-urls.yaml
Co-authored-by: Felix Fontein <felix@fontein.de>
* improve backwards-compatibility
add optional arg to allow custom update-center.json targets
* pep8 fixes
* fix inconsistency in argument documentation
* Apply suggestions from code review
Co-authored-by: Amin Vakil <info@aminvakil.com>
* add unit tests
* fix pep8
* Apply suggestions from code review
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Amin Vakil <info@aminvakil.com>
(cherry picked from commit 9c7b539ef6)
Co-authored-by: NivKeidan <51288016+NivKeidan@users.noreply.github.com>
* [nmcli] add connection.slave-type for teamed devices
* [nmcli] add fragment with changes for #2827
* [nmcli] add tests for network team
* [nmcli] fix testing
Co-authored-by: Oriol MULA VALLS <oriol.mula@lxp.lu>
(cherry picked from commit 2d1527a564)
Co-authored-by: omula <joriol.mula@gmail.com>
* pacman: Descriptive state documentation
* Update plugins/modules/packaging/os/pacman.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Martin Rys <martin@rys.pw>
Co-authored-by: Felix Fontein <felix@fontein.de>
(cherry picked from commit debb15efbe)
Co-authored-by: Martin <spleefer90@gmail.com>
* Check idempotency on yum_versionlock
* Lock packages wildcard
* fix formatting
Co-authored-by: Felix Fontein <felix@fontein.de>
* Fix formatting in asserts
* little closer but not still there
* Import fnmatch
* Change check_mode logic
* Add check_mode for add
* Add changelog
Co-authored-by: Felix Fontein <felix@fontein.de>
(cherry picked from commit 0a9cf38118)
Co-authored-by: Amin Vakil <info@aminvakil.com>
* Add ability to create project under a user
* Add changelog
* Add username option
* Update changelogs/fragments/2824-gitlab_project-project-under-user.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* Make group and username mutually exclusive
Co-authored-by: Felix Fontein <felix@fontein.de>
(cherry picked from commit c7cf6f2eb7)
Co-authored-by: Stef Graces <stef.graces@nubera.eu>
* fix keystore type; update unit tests
* add changelog fragment
* document new param 'keystore_type'
* add keystore_type support (backward compatible)
* check JKS format with magic bytes
* update integration tests
* revert first changes in unit tests
* update changelog fragment
* fix magic bytes for python2/python3
* fix integration tests (irrelevant check_mode)
* fix unit test (keystore removed before failure => changed=true)
* fix typo
* fix spelling
* shorten a branch
* mock is_jks_or_pkcs12
* fix function path in unit tests
* Apply suggestions from code review (spelling)
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
* rename a method (module + unit tests)
* move ArgumentSpec class content to main()
* refactor create() to not loose existing keystore in case of error
* update unit tests
* add integration test (error handling)
* fix keystore backup cleanup
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
(cherry picked from commit 199ead85d0)
Co-authored-by: quidame <quidame@poivron.org>
* Add ability to create project under a user
* Add changelog
* Change minor_changes in changelog
As suggested in this comment https://github.com/ansible-collections/community.general/pull/2824#discussion_r653411741
* Fix user's namespace
* Delete changelog
* Add changelog
* Fix changelog
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Amin Vakil <info@aminvakil.com>
* Change user_group_id to namespace_group_id
Co-authored-by: Felix Fontein <felix@fontein.de>
* Change to namespace_id
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Amin Vakil <info@aminvakil.com>
(cherry picked from commit 2fb0877577)
Co-authored-by: Stef Graces <stef.graces@nubera.eu>
* added check_destroy
This is based on the work done in PR 398. Authors from that PR:
Co-authored-by: effaamponsah <kamponsah.amponsah@gmail.com>
Co-authored-by: m-yosefpor
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Andrew Klychkov <aaklychkov@mail.ru>
* added changelog fragment
* Update plugins/modules/cloud/misc/terraform.py
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
* Update changelogs/fragments/2874-terraform-check-destroy.yml
Co-authored-by: Amin Vakil <info@aminvakil.com>
Co-authored-by: effaamponsah <kamponsah.amponsah@gmail.com>
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Andrew Klychkov <aaklychkov@mail.ru>
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
Co-authored-by: Amin Vakil <info@aminvakil.com>
(cherry picked from commit 9dd91f949a)
Co-authored-by: Alexei Znamensky <103110+russoz@users.noreply.github.com>
* Initial Commit
* Adding changelog fragment
* Ensured params are present during verbose output and enhanced check_mode
* Making specific to builtins
* Removing unneccessary external call
* Acutal bugfix
(cherry picked from commit d180390dbc)
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
* Redis: slave -> replica
* Fallback for old Redis versions in CI.
(cherry picked from commit 2d1f5408d3)
Co-authored-by: Felix Fontein <felix@fontein.de>
* Initial Commit
* Further refinement
* Fixing archive name distortion for single file zips
* Applying initial review suggestions
* Updating path value for single target
* Adding test case for single target zip archiving
* Fixing integration for RHEL/FreeBSD on ansible 2.x
* Fixing integration second attempt
* Adding changelog fragment
* Updating changelog fragment
(cherry picked from commit 24dabda95b)
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
* Allow keycloak_group.py to take token as parameter for the authentification
Refactor get_token to pass module.params + Documentation
Fix unit test and add new one for token as param
Fix identation
Update plugins/modules/identity/keycloak/keycloak_client.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Update plugins/modules/identity/keycloak/keycloak_clienttemplate.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Allow keycloak_group.py to take token as parameter for the authentification
Refactor get_token to pass module.params + Documentation
* Update plugins/module_utils/identity/keycloak/keycloak.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Check if base_url is None before to check format
Update plugins/module_utils/identity/keycloak/keycloak.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Update plugins/modules/identity/keycloak/keycloak_client.py
Co-authored-by: Amin Vakil <info@aminvakil.com>
Update plugins/modules/identity/keycloak/keycloak_clienttemplate.py
Co-authored-by: Amin Vakil <info@aminvakil.com>
Switch to modern syntax for the documentation (e.g. community.general.keycloak_client)
Update keycloak_client.py
Update keycloak_clienttemplate.py
Add keycloak_authentication module to manage authentication
Minor fixex
Fix indent
* Update plugins/modules/identity/keycloak/keycloak_authentication.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Update plugins/modules/identity/keycloak/keycloak_authentication.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Update plugins/modules/identity/keycloak/keycloak_authentication.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Update plugins/modules/identity/keycloak/keycloak_authentication.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Update plugins/modules/identity/keycloak/keycloak_authentication.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Removing variable ANSIBLE_METADATA from beginning of file
Minor fix
Refactoring create_or_update_executions :add change_execution_priority function
Refactoring create_or_update_executions :add create_execution function
Refactoring create_or_update_executions: add create_subflow
Refactoring create_or_update_executions: add update_authentication_executions function
Minor fix
* Using FQCN for the examples
Minor fix
Update plugins/module_utils/identity/keycloak/keycloak.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Update plugins/module_utils/identity/keycloak/keycloak.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Update plugins/module_utils/identity/keycloak/keycloak.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Update plugins/module_utils/identity/keycloak/keycloak.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Update plugins/module_utils/identity/keycloak/keycloak.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Update plugins/module_utils/identity/keycloak/keycloak.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/identity/keycloak/keycloak_authentication.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Update plugins/modules/identity/keycloak/keycloak_authentication.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Refactoring: rename isDictEquals into is_dict_equals
Refactoring: rename variable as authentication_flow
Refactoring: rename variable as new_name
Refactoring: rename variable as flow_list
Refactoring: rename variable as new_flow
Refactoring: changing construction of dict newAuthenticationRepresentation and renaming as new_auth_repr
Minor fix
* Refactoring: rename variables with correct Python syntax (auth_repr, exec_repr)
Move create_or_update_executions function from keycloak.py to keycloak_authentication.py
Minor fix
Remove mock_create_or_update_executions not needed anymore
Fix unit test
Update plugins/module_utils/identity/keycloak/keycloak.py
is_dict_equals function return True if value1 empty
Update plugins/module_utils/identity/keycloak/keycloak.py
Co-authored-by: Alexei Znamensky <103110+russoz@users.noreply.github.com>
Rename is_dict_equal as is_struct_included and rename params as struct1 and struct2
Rename variables according to Python naming conventions
Refactoring: add find_exec_in_executions function in keycloak_authentication to remove code duplication
typo
Add blank line
Add required parameter, either creds or token
Typo
try/except only surround for loop containing struct2[key]
Add sub-options to meta_args
assigment of result['changed'] after if-elif-else block
Fix CI error: parameter-type-not-in-doc
Fix unit test: none value excluded from comparison
Minor fix
Simplify is_struct_included function
Replace 'type(..) is' by isinstance(..)
Remove redundant required=True and redundant parenthesis
Add check_mode, check if value is None (None value added by argument spec checker)
Apply suggestions from code review
Update plugins/modules/identity/keycloak/keycloak_authentication.py
* Update plugins/modules/identity/keycloak/keycloak_authentication.py
* Add index paramter to configure the priority order of the execution
* Minor fix: authenticationConfig dict instead of str
Co-authored-by: Felix Fontein <felix@fontein.de>
(cherry picked from commit 24c5d4320f)
Co-authored-by: Gaetan2907 <48204380+Gaetan2907@users.noreply.github.com>
* Support stop a running Jenkins build. Meanwhile enrich document content and test cases.
* Fix the inconsistencies regarding the function name.
* Submit the changelog and fix a PEP8 issue.
* Remedy whitespace related PEP8 issues.
* Implement the idempotent test case for the stop build function.
* Make sure it returns proper changed status when we stop a build repeatedly.
* Fix incorrect usages on comparison with True or False and incorrect usages on validating the changed status.
* In this mocking situation, adjust the mock return value and test case to perform unit testing.
* Implement JenkinsMockIdempotent() to mock return value in idempotent test cases.
* Fix issues reported by CI.
* Refactor the code to avoid CI exception and remove get_build_status() from mock function as they should not be there.
* Update plugins/modules/web_infrastructure/jenkins_build.py
Co-authored-by: Felix Fontein <felix@fontein.de>
(cherry picked from commit 860b2b89a3)
Co-authored-by: Tong He <68936428+unnecessary-username@users.noreply.github.com>
* gem_module: Add bindir option
This option allows to specify directory to install executables, e.g.
`/home/user/bin` or `/home/user/.local/bin`. This comes especially handy
when used with user_install option as the default path of executables is
not in PATH.
* Update changelogs/fragments/gem_module_add_bindir_option.yml
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
* gem_module: Integration tests for bindir option
* gem_module: Update Integration tests for bindir option
* gem_module: Update Integration tests for bindir option
Make sure gist is not installed system-wide prior the tests
* Revert "gem_module: Update Integration tests for bindir option"
This reverts commit 04eec6db27.
* Do not check "install_gem_result is changed" for ansible develop on openSUSE
* Revert "Do not check "install_gem_result is changed" for ansible develop on openSUSE"
This reverts commit 48ecb27889.
* gem_module: Use --norc to avoid surprises
Run install and uninstall actions with `--norc`. This way ansible has
more control over the way gems are installed.
* Revert "gem_module: Use --norc to avoid surprises"
This reverts commit 66f40bcfe6.
* gem_module: bindir - Ignore openSUSE Leap
* Update plugins/modules/packaging/language/gem.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* gem_module: Use --norc to avoid surprises
Run install and uninstall actions with `--norc` when supported (rubygems >= 2.5.2).
This way ansible has more control over the way gems are installed.
* Try distutils.version instead of packaging
* ver is an list, not string
* ver is not list either but tuple
* Update changelogs/fragments/gem_module_add_bindir_option.yml
Co-authored-by: Alexei Znamensky <103110+russoz@users.noreply.github.com>
* ver can be None (when can this happen?)
* gem: Add norc option
* Apply suggestions from code review
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/packaging/language/gem.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Use tuples to compare versions
* Apply suggestions from code review
Co-authored-by: Amin Vakil <info@aminvakil.com>
* Update plugins/modules/packaging/language/gem.py
Co-authored-by: Amin Vakil <info@aminvakil.com>
* lost norc option check is back
* Move handling norc option to separate function
* cosmetic
* fix for the previos commit
* Apply suggestions from code review
Co-authored-by: Felix Fontein <felix@fontein.de>
* Cache result of get_rubygems_version
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Alexei Znamensky <103110+russoz@users.noreply.github.com>
Co-authored-by: Amin Vakil <info@aminvakil.com>
(cherry picked from commit ce35d88094)
Co-authored-by: Stanislav German-Evtushenko <ginermail@gmail.com>
ZFS-backed block devices may contain just the bare device name and
not have extra options like `,size=foo`, `,format=qcow2` etc. This
breaks an assumption in existing regex (which expects a comma).
Support such device strings and add a couple of testcases to validate.
(cherry picked from commit db713bd0f5)
Co-authored-by: Anup Chenthamarakshan <anupcshan@users.noreply.github.com>
* npm - fix updating version specific modules
if a version specific module is used, the comparison will be used with the version and not only by name
* Update plugins/modules/packaging/language/npm.py
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
* Update changelogs/fragments/2830-npm-version-update.yml
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
* Update changelogs/fragments/2830-npm-version-update.yml
Co-authored-by: Amin Vakil <info@aminvakil.com>
* Update changelogs/fragments/2830-npm-version-update.yml
Co-authored-by: Amin Vakil <info@aminvakil.com>
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
Co-authored-by: Amin Vakil <info@aminvakil.com>
(cherry picked from commit 1ed4394c5e)
Co-authored-by: Shahar Mor <shaharmor1@gmail.com>
* fix sudorule_add_allow_command_group
fix sudorule_add_allow_command_group is not working on freeIPA 4.8.7 at least, sudorule_add_allow_command should be used instead with item sudocmdgroup
* Added changelog fragment
(cherry picked from commit ee23c26150)
Co-authored-by: TizeN85 <tenou.sylvain@outlook.com>
* reviving flatpack PR
* added changelog fragment
* adjusted integration tests per PR
* adjusted examples to use the full name of the module
* Use new local artifacts.
* Re-add StrictVersion import.
* Try to clean up PR.
* ...
* Use original name in installed/not installed list.
* More fixes.
* Work around flatpak bug.
* Fix bug I introduced.
Co-authored-by: Felix Fontein <felix@fontein.de>
(cherry picked from commit 3997d5fcc8)
Co-authored-by: Alexei Znamensky <103110+russoz@users.noreply.github.com>
pamd module does not handle or modify authselect profiles
which are basically template files for authselect. The autheselect
generates pam.d files from these profiles.
Fixes: #1954
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
(cherry picked from commit 4a47d121aa)
Co-authored-by: Abhijeet Kasurde <akasurde@redhat.com>
* Add server_prefix and server_port as supported arguments for the redhat_subscription module.
* Adjust the argument sequence in the test case to be consistent with the original code in line 364 in redhat_subscription.py and add the changelog fragment.
* Grammatical changes such as adding full stops and using 'an HTTP' instead of 'a HTTP'.
* Commit the suggested changelog update.
Co-authored-by: Amin Vakil <info@aminvakil.com>
* Fix typo.
Co-authored-by: Amin Vakil <info@aminvakil.com>
Co-authored-by: Amin Vakil <info@aminvakil.com>
(cherry picked from commit 2f2f384b4e)
Co-authored-by: Tong He <68936428+unnecessary-username@users.noreply.github.com>
* Add domain to onepassword lookup
* Add changelog
* Add default to domain documentation
* Improve format
* Fix sanity issue
* Add option type to documentation
Co-authored-by: Felix Fontein <felix@fontein.de>
* Add domain to init
Co-authored-by: Felix Fontein <felix@fontein.de>
(cherry picked from commit dab5d941e6)
Co-authored-by: Amin Vakil <info@aminvakil.com>
* Similar version restrictions than flatpak_remote tests.
* ...
* Try to work around missing dependencies.
* Revert "Try to work around missing dependencies."
This reverts commit 66a4e38566.
* Add changelog.
* App8 -> App2; make sure that there are two apps App1 and App2.
* Fix forgotten variabe.
* Remove test notices.
* Seems like flatpak no longer supports file:// URLs.
The tests would need to be rewritten to offer the URL via http:// instead.
* Try local HTTP server for URL tests.
* ...
* Lint, add status check.
* Add boilerplate.
* Add 'ps aux'.
* Surrender to -f.
* Work around apparent flatpak bug.
* Fix YAML.
* Improve condition.
* Make sure test reruns behave better.
(cherry picked from commit bb37b67166)
Co-authored-by: Felix Fontein <felix@fontein.de>
* zypper_repository: Check idempotency on adding repo with releasever
* Name required when adding non-repo files.
* Initial try to fix releasever
* Replace re.sub with .replace
* name releaseverrepo releaseverrepo
* Change to ansible_distribution_version for removing repo
* improve asserts format
* add changelog
* Fix changelog formatting
Co-authored-by: Felix Fontein <felix@fontein.de>
* improve command used for retrieving releasever variable
Co-authored-by: Felix Fontein <felix@fontein.de>
* add basearch replace
* Add basearch to changelog fragment
* Check for releasever and basearch only when they are there
Co-authored-by: Felix Fontein <felix@fontein.de>
(cherry picked from commit 94a53adff1)
Co-authored-by: Amin Vakil <info@aminvakil.com>
* ModuleHelper - also uses LC_ALL to force language (#2731)
* also uses LC_ALL to force language
* adjusted test_xfconf and test_cpanm
* added changelog fragment
* Update changelogs/fragments/2731-mh-cmd-locale.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* adjusted chglog frag per PR
Co-authored-by: Felix Fontein <felix@fontein.de>
(cherry picked from commit 6a41fba2f8)
* snap revamp hasn't been backported yet.
Co-authored-by: Alexei Znamensky <103110+russoz@users.noreply.github.com>
Co-authored-by: Felix Fontein <felix@fontein.de>
* fix call to async_status (-> action plugin)
* add changelog fragment
* Apply suggestions from code review
Co-authored-by: Felix Fontein <felix@fontein.de>
* rename a local variable for readability
Co-authored-by: Felix Fontein <felix@fontein.de>
(cherry picked from commit 463c576a67)
Co-authored-by: quidame <quidame@poivron.org>
* fix: include portal and port for logged on check
* refactor: remove extra space
* fix: allow None portal and port on target_loggedon test
* add auto_portal_startup argument
* fix: change param name for automatic_portal
* add changelog fragment
* refactor: Update changelogs/fragments/2684-open_iscsi-single-target-multiple-portal-overrides.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* add version added info to auto_portal_startup arg
* add example for auto_portal_startup
* fix: remove alias for auto_portal form arg_spec as well
* refactor: elaborate in fragment changelogs
Elaborate change
Co-authored-by: Amin Vakil <info@aminvakil.com>
* open_iscsi: elaborate changelog fragment
* Update plugins/modules/system/open_iscsi.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Amin Vakil <info@aminvakil.com>
(cherry picked from commit 9d8bea9d36)
Co-authored-by: The Binary <binary4bytes@gmail.com>
* Wire token param into consul_api #2124
* Update changelogs/fragments/2124-consul_kv-pass-token.yml
Co-authored-by: Alexei Znamensky <103110+russoz@users.noreply.github.com>
* #2124 renamed release fragment to match pr, removed parse_params.
* putting look back in, do some linting #2124
* try more linting
* linting
* try overwriting defaults in parse_params with get_option vals, instead of removing that function completely.
* Revert "back to start, from 2nd approach: allow keyword arguments via parse_params for compatibility."
This reverts commit 748be8e366.
* Revert " linting"
This reverts commit 1d57374c3e.
* Revert " try more linting"
This reverts commit 91c8d06e6a.
* Revert "putting look back in, do some linting #2124"
This reverts commit 87eeec7180.
* Revert " #2124 renamed release fragment to match pr, removed parse_params."
This reverts commit d2869b2f22.
* Revert "Update changelogs/fragments/2124-consul_kv-pass-token.yml"
This reverts commit c50b1cf9d4.
* Revert "Wire token param into consul_api #2124"
This reverts commit b60b6433a8.
* minimal chnages for this PR relative to current upstream.
* superfluous newline in changlog fragment.
Co-authored-by: Alexei Znamensky <103110+russoz@users.noreply.github.com>
(cherry picked from commit 0e6d70697c)
Co-authored-by: fkuep <flo.kuepper@gmail.com>
* Reduce stormssh searches based on host
Due to the stormssh searches in the whole config values, we need to reduce the search results based on the full matching of the hosts
* Removed whitespaces in the blank line
* Added changelog fragment and tests for the fix.
* Added newline at the end of the changelog fragment
* Added newline at the end of the tests
* Fixed bug with name in tests
* Changed assertion for the existing host
* Update changelogs/fragments/2568-ssh_config-reduce-stormssh-searches-based-on-host.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* Adjusted tests
* New line at the end of the tests
Co-authored-by: Anton Nikolaev <anikolaev@apple.com>
Co-authored-by: Felix Fontein <felix@fontein.de>
(cherry picked from commit 1a4af9bfc3)
Co-authored-by: Anton Nikolaev <drenout@gmail.com>
* fix: ensure workspace is reset to current value
* chore: linter
* chore: changelog
(cherry picked from commit c49a384a65)
Co-authored-by: christophemorio <49184206+christophemorio@users.noreply.github.com>
* add module pacman_key
* add symlink and fix documentation for pacman_key
* documentation fix for pacman_key
* improve logic around user input
* Update plugins/modules/packaging/os/pacman_key.py
Co-authored-by: Andrew Klychkov <aaklychkov@mail.ru>
* Update plugins/modules/packaging/os/pacman_key.py
Co-authored-by: Andrew Klychkov <aaklychkov@mail.ru>
* Update plugins/modules/packaging/os/pacman_key.py
Co-authored-by: Andrew Klychkov <aaklychkov@mail.ru>
* Update plugins/modules/packaging/os/pacman_key.py
Co-authored-by: Andrew Klychkov <aaklychkov@mail.ru>
* Update plugins/modules/packaging/os/pacman_key.py
Co-authored-by: Andrew Klychkov <aaklychkov@mail.ru>
* Update plugins/modules/packaging/os/pacman_key.py
Co-authored-by: Andrew Klychkov <aaklychkov@mail.ru>
* Update plugins/modules/packaging/os/pacman_key.py
Co-authored-by: Andrew Klychkov <aaklychkov@mail.ru>
* Update plugins/modules/packaging/os/pacman_key.py
Co-authored-by: Andrew Klychkov <aaklychkov@mail.ru>
* Update plugins/modules/packaging/os/pacman_key.py
Co-authored-by: Andrew Klychkov <aaklychkov@mail.ru>
* Update plugins/modules/packaging/os/pacman_key.py
Co-authored-by: Andrew Klychkov <aaklychkov@mail.ru>
* Improve parameter checking
required_one_of=[] is neat.
Co-authored-by: Alexei Znamensky
* Revert "Improve parameter checking"
This reverts commit 044b0cbc85.
* Simplify a bunch of code.
* fix typos pointed out by yan12125
* replaced manual checks with required-if invocation
* added default keyring to documentation
* some initial tests
* updated metadata
* refactored to make sanity tests pass
* refactor to make sanity tests pass ... part deux
* refactor: simplify run_command invocations
* test: cover check-mode and some normal operation
* docs: fix grammatical errors
* rip out fingerprint code
a full length (40 characters) key ID is equivalent to the fingerprint.
* refactor tests, add a couple more
* test: added testcase for method: data
* Update plugins/modules/packaging/os/pacman_key.py
Co-authored-by: Alexei Znamensky <103110+russoz@users.noreply.github.com>
* docs: correct yaml boolean type
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Andrew Klychkov <aaklychkov@mail.ru>
Co-authored-by: Alexei Znamensky <103110+russoz@users.noreply.github.com>
Co-authored-by: Felix Fontein <felix@fontein.de>
(cherry picked from commit 5ddf0041ec)
Co-authored-by: George Rawlinson <george@rawlinson.net.nz>
* keycloak_realm.py: Mark 'reset_password_allowed' as no_log=False
This value is not sensitive but Ansible will complain about it otherwise
* fixup! keycloak_realm.py: Mark 'reset_password_allowed' as no_log=False
* Apply all suggestions from code review
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
(cherry picked from commit fe5717c1aa)
Co-authored-by: Benjamin Schubert <contact@benschubert.me>
* keycloak_realm.py: Fix the `ssl_required` parameter according to the API
The `ssl_required` parameter is a string and must be one of 'all',
'external' or 'none'. Passing a bool will make the server return a 500.
* fixup! keycloak_realm.py: Fix the `ssl_required` parameter according to the API
* Update changelogs/fragments/keycloak_realm_ssl_required.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
(cherry picked from commit efbda2389d)
Co-authored-by: Benjamin Schubert <contact@benschubert.me>
* nmcli: new arguments to ignore automatic dns servers and gateways
Closes#1087
* Add changelog fragment
* Address review comments
(cherry picked from commit 1ad85849af)
Co-authored-by: Chih-Hsuan Yen <yan12125@gmail.com>
