In VariableManager, we fetch the params specifically in the next step,
so including them in the prior step is unnecessary and could lead to things
being overridden in an improper order.
In Block, we should not be getting the params for the role as they are
included earlier via the VariableManager.
Fixes#14411
This patch adds the port argument as a valid parameter to the f5_spec.
This argument is supported in bigsuds version 1.0.4 and greater, so
this patch uses the __version__ variable of the bigsuds module to
determine when the port value should be honored by the module.
By default the `Shell` class disables ssh agents. The `junos_netconf`
module uses this class, but doesn't re-enable agents.
Here it's explicitly enabled again, so an ssh agent can be used to
connect to and configure Junos devices.
* Don't filter hosts remaining based on their failed state. Instead rely
on the PlayIterator to return None/ITERATING_COMPLETE when the host is
failed.
* In the free strategy, make sure we wait outside the host loop for all
pending results to be processed.
* Use the internal _set_failed_state() instead of manually setting things
when a failed child state is hit
Fixes#15623
In `lib/ansible/executor/play_iterator.py`, ansible sets a host's
`_gathered_facts` property to `True` without checking to see if there
are any tasks to be executed. In the event that the entire play is
skipped, `_gathered_facts` will be `True` even though the `setup`
module was never run.
This patch modifies the logic to only set `_gathered_facts` to `True`
when there are tasks to execute.
Closes#15744.
This changeset addresses the issue reported here:
ansible/ansible-modules-core#1765
The yum module (at least) includes its task results as strings, rather than
dicts, and the code this changeset replaces assumed that in that instance the
task was skipped. The updated behaviour assumes that the task has been
skipped only if:
* results exist, and
* all results are dicts that include a truthy skipped value
Issue #15633 observes that a meta: inventory_refresh task causes the playbook
to exit. An inventory refresh flushes all caches and rebuilds all host
objects, assigning new UUIDs to each. These new host UUIDs currently fail to
match those on host objects stored for restrictions in the inventory, causing
the playbook to exit for having no hosts to run further tasks against.
This changeset attempts to address this issue by storing host restrictions
by name, and comparing inventory host names against these names when applying
restrictions in get_hosts.
* better fix for arch version detection
fixes #15696
* be extra safe about tracebacks in facts.py
* add comments to explain the setup
* make allowempty more conservative, ignore file content
* wrap function call in try/except
* should never happen, but if it happens the bug should be distribtion=N/A and not a traceback
* When var name is the same as var content, try to template it before reporting that var is not defined.
Add asserts in test_var_blending to check this special corner case.
* Fix integration tests when using debug with list or dict.
It wasn't doing anything that a literal couldn't do and used
unicode_escape which only understands latin1 (The author of the code
seems to have thought it took an encoding argument but it looks like
that was silently ignored.)
This was reinitialized every time we forked before so we weren't sharing
the same Locks. It also was not accounting for modules which were
directly invoked by an action plugin instead of going through the
strategy plguins.
* add tests for centos6, rhel6 and rhel7
* gen_distribution_version_testcase with python2.6
* remove unused imports
* fix redhat/vmware/... parsing
* add centos7 test case
* Make ziploader's ansible and ansible.module_utils libraries into
namespace packages.
* Move __version__ and __author__ from ansible/__init__ to
ansible/release.py. This is because namespace packages only load one
__init__.py. If that is not the __init__.py with the author and
version info then those won't be available.
* In ziplaoder, move the version ito ANSIBLE_CONSTANTS.
* Change PluginLoader to properly construct the path to the plugins even
when namespace packages are present.
* split code as separate class
* split different distributions as individual functions
* keep program logic mostly identical (for now)
* increase readability, reduce complexity/indentation
* make future testing/refactoring easier
* step towards making distribution parsing independent of the Facts class
* add some changes to make facts.py python3 parsable
* Add shared functionality to return list of security group IDs from list of security group names - this functionality can be used by nearly all ec2 modules
* Improved doc string for get_ec2_security_group_ids_from_names function
* Clarify exception handling in EOS
Also modify to EOS to standardize modules. It makes vimdiff a lot less angry
* Move IOS exception handling into Cli
* Move IOS-XR exception handling into Cli
* Move JUNOS exception handling into Cli
* Move NXOS exception handling into Cli
And reorganize to make it match the other modules
* Move OpenSwitch exception handling into Cli
More speculative restructuring here
added warnings for invalid kwargs
sniff supported authtypes (for new pywinrm)
use default authtypes (for old pywinrm)
error on unsupported authtype
allow no username/password to be specified (kerb SSO)
tested w/ old and new pywinrm
hacky CLIXML parsing of stderr
* HTTPError can also function as a non-exceptional file-like return value (the same thing that urlopen() returns)
* HTTPError - adding response to info dictionnary
* HTTPError - adding response to info dictionnary
* HTTPError - adding body response to info dictionnary
* use list of possible directories directly instead of checking distribution info
* this could fail if someone has keys in one of the other directories, but there could also be custom ssh key directories, which
are not checked at all
* this is work towards separating Facts from Distribution in facts.py
Ensure that initial setup in creating the key directory for ansible
accelerate mode keys, and generation/storage of the key for a
particular host are completed in a multiprocess safe manner.
Creating directories/files and then assigning permissions and contents
to them means that paths may exist and satisfy the os.path.exists()
method in python for other processes before they are usable.
Use a combination of locking around operations with use of unique named
files and an OS file system move to ensure that the conditions of
checking whether a file or directory exists, where it is potentially
created by another thread, will only succeed when the file has both the
correct contents and permissions.
Fixes#13850
Previously we were first checking the fail/run state of the child
state for tasks/rescue/always portions of the block. Instead we are now
always recursively iterating over the child state and then evaluating
whether the child state is failed or complete before changing the failed/
run state within the current block.
Fixes#14324
This update will attempt to guess the file format based on the template
extension if the format argument isnt set. It will also set the commit
comment to the task name if the comment isnt' explicitly defined.
This adds a check to validate the arugment for config_format kwarg in
get_config. If the specified format is not a valid option, the shared
module will call fail_json
Netconf support is provided using the junos-eznc library and the shared
module depends on junos-eznc to be installed on the local Ansible host. This
commit also adds changes to the netcfg library to handle receiving messages
over netconf.
To use netconf, specify transport=netconf for junos module. Be sure that
netconf has been enabled on the remote device.
Which we're use on a case-by-case basis if we find people were actually
using comma-separated strings for list values outside of hosts. Support
for doing so is now deprecated and users should instead use the full
YAML syntax for lists of values.
Fixes#15291
* Don't rely on username to check for root privileges
The SSH username isn't a reliable way to check if we've got root privileges on
the remote system (think "toor" on FreeBSD). Because of this check, Ansible
previously tried to use the fallback solutions for granting file access (ACLs,
world-readable files) even on systems where it had root privileges when the
remote username didn't match the literal string "root".
Instead of running checks on the username, just try using `chmod` in any case
and fall back to the previous "non-root" solution when that fails.
* Fail if we are root and changing ownership failed
Since this code is security sensitive we document exactly the expected
permissions of the temporary files once this function has run. That way
if a flaw is found in one end-result we know more precisely what scenarios
are affected and which are not.
Instead of using the old OpenSwitch runconfig, we'll use
Mir's new ops.dc declarative config for the DC interaction
with OpenSwitch. This gives us the clearer separation between
ansible and the OpenSwitch, as well as the performance
improvement done inside the ops.dc module itself.
Squashed the original Mir's change into single commit.
Tested-by: Kei Nohguchi <kei@nohguchi.com>
* Move zipcache temp dir creation into the locked section otherwise it
races with other workers.
* Catch IOError and turn it into an AnsibleError. IOErrors can hang
multiprocessng.
Updated python module wrapper explode method to drop 'args' file next to module.
Both execute() and excommunicate() debug methods now pass the module args via file to enable debuggers that are picky about stdin.
Updated unit tests to use a context manager for masking/restoring default streams and argv.
If add_host is performed with hostname existing in inventory, but
not yet accessed and put in inventory cache, additional host with
same hostname and different uuid is created, causing patterns to
misbehave.
- search entity by path
- search vm based on folder
- search for a vm based on given id ( uuid/name/dns_name/ip/inventory_path)
- search for a cluster by name, in a given datacenter (optionally)
- search for objects of a given type in a folder
Note: instance uuid is unique to a VM
The first filter is regex_search which adds the ability to do a regex
search on a fact. The filter supports returning either all capture groups
or a set of capture groups (either by index or named).
Example usage of regex_search filter
debug: msg="{{ out.stdout[0] | regex_search('image version. (?P<test>\d+).(\d+)', '\\g<test>', '\\2' ) }}"
The second filter is regex_findall with adds the capability to do a
regex findall on a fact or variable and return all occurances of a pattern.
debug: msg="{{ out.stdout[0] | regex_findall('vlan (\d+)' }}"
The filter supports two addtional keyword arguments, ignorecase=[true, false]
and multiline=[true, false]
rm _del_ as it might leak memory
renamed to tmp file cleanup
added exception handling when traversing file list, even if one fails try rest
added cleanup to finally to ensure removal in most cases
- get_real_file will decrypt vault encrypted files and return a path to
a temporary file.
- cleanup_real_file will remove a temporary file created previously with
get_real_file
Ansible when there was a percentage that was calculated to be less than
1.0 would run all hosts as the value for a rolling update.
The error is due to the fact that Python will round a
float that is under 1.0 to 0, which will trigger the case of
0 hosts. The 0 host case tells ansible to run all hosts.
The fix will see if the percentage calculation after int
conversion is 0 and will else to 1 host.
This makes our recursive, ast.parse performance measures as fast as
pre-ziploader baseline.
Since this unittest isn't testing that the returned module data is
correct we don't need to worry about os.rename not having any module
data. Should devise a separate test for the module and caching code
Since 2.0 made all includes dynamic, it is now possible to create and
include a file in the course of executing a playbook. However, with the
introduction of implicit static includes this can cause problems if an
include is thought to be static but does not yet exist. For now, we're
handling missing implicit static includes as a potential dynamic include
but also adding a deprecation message to show includes like this will
need to be marked as `static: no` in the future.
Fixes#15342
Due to an apparent race condition while using pty's on a heavily loaded
system, rarely a request to create a temp directory returns an empty
string rather than the newly created path, causing an error. Disabling
forced pty's appears to resolve the issue, so this patch modifies the
mkdtemp remote call not use -tt as we're not escalating privileges and
thus no pty is required.
Fixes#13876
* Could only have one alias before. Subsequent aliases overrode the
previous ones. Now multiple aliases work.
* Fix BLACKLISTED_MODULES. Previously, modules were listed in the
generated documentation despite being blacklisted
* Deprecated modules form extras were showing the (E) tag and not the
(D) tag. Reversed that now (Probably not necessary to also show the
E tag).
* Sort the deprecated modules alphabetically in the Category docs as
well as the list of all modules
* Optimization: Previously rendered the modules to rst twice once in all
group and once in individual categories. Fixed to only render them
once.
* Add fireball to blacklist and remove async_status (as people need to
use that).
* Remove workaround for fixed bug.
The bug where PluginLoader required objects to directly inherit from
base_classes has been fixed. Remove workaround from this strategy
plugin Also switched to using super so that we don't have to modify
all of hte code anytime something like that happens.
* These should be to_uniocde because they're being sent to display()
* now you can specify a yaml invenotry file
* ansible_group_priority will now set this property on groups
* added example yaml inventory
* TODO: make group var merging depend on priority
groups, child/parent relationships should remain unchanged.
Some debuggers are easier to work with when we do everything in a single
process. This debug option caters to that at the expense of being
different from what Ansible will actually do to invoke a module.
When we document this we should be clear that this shouldn't be used for
general purpose debugging and that some modules may show strange
"errors" when used with this. Those won't be considered real bugs as
it's not how ansible really invokes the modules.
action plugins will now skip _fixup_perms for Powershell. We'll have to come up with another way to do this at some point, but it's not necessary yet since we don't support become on Windows. Also added NotImplementedError throws to chmod/chown/set_facl operations on Powershell (instead of returning '') in case anyone tries to use them in the future.
fixes#15312
* Run the module as a script from the wrapper instead of executing in the same process.
Fixes cornercases where the module could potentially be executed twice
if we import and then run the main() function without calling sys.exit()
somewhere.
Also fixes problem with concurrent.futures() hanging. Not sure
precisely how this is being triggered but it is related to invoking the
main() function outside of an if __name__ == '__main__' conditional.
* Fix for python-2.6
This reverts commit 1ffadbcc80.
Some modules seem to have path listed for things that are "commands" --
something that may be a path to a command or a bare command that should
be looked up in PATH. With this change, if they were formerly looked up
inPATH they are now being made into an absolute path in the cwd.
Reverting this until we can think more about whether to do this and
change those modules to not use path for those parameters.
* Ziploader proof of concept (jimi-c)
* Cleanups to proof of concept ziploader branch:
* python3 compatible base64 encoding
* zipfile compression (still need to enable toggling this off for
systems without zlib support in python)
* Allow non-wildcard imports (still need to make this recusrsive so that
we can have module_utils code that imports other module_utils code.)
* Better tracebacks: module filename is kept and module_utils directory
is kept so that tracebacks show the real filenames that the errors
appear in.
* Make sure we import modules that are used into the module_utils files that they are used in.
* Set ansible version in a more pythonic way for ziploader than we were doing in module replacer
* Make it possible to set the module compression as an inventory var
This may be necessary on systems where python has been compiled without
zlib compression.
* Refactoring of module_common code:
* module replacer only replaces values that make sense for that type of
file (example: don't attempt to replace python imports if we're in
a powershell module).
* Implement configurable shebang support for ziploader wrapper
* Implement client-side constants (for SELINUX_SPECIAL_FS and SYSLOG)
via environment variable.
* Remove strip_comments param as we're never going to use it (ruins line
numbering)
* Don't repeat ourselves about detecting REPLACER
* Add an easy way to debug
* Port test-module to the ziploader-aware modify_module()
* strip comments and blank lines from the wrapper so we send less over the wire.
* Comments cleanup
* Remember to output write the module line itself in powershell modules
* for line in lines strips the newlines so we have to add them back in
Before this patch, if config was ['/some/path'] then it would enter the
else block and config would be set to [].
The regression this patch fixes was introduced by 700db154.
this enhancement will cause the module to connect to the remote ios device
the first time a command wants to run instead of building a connection
immediately
this fixes a bug in nxos shared module to not immediately send a \n when
the connection is made. this commit also localizes the prompt handling
to the nxos module
The network config and template modules share a set of common functions that
have been pulled into the netcfg shared module. This is backwards compatible
with the current implemention in the modules.
now assures it is always a list of paths and not just assumes it
this avoids issues of parsing a 'string path' and picking up '/' as
a valid path for plugin loader
I was surprised to see complete file content in the (JSON) task output when
in diff-mode. Since we see the diff anyhow, there's no need to send everything
on screen.
`ansible_failed_task`:
Contains the task data, essentially a serialized view of the Task() object.
`ansible_failed_result`:
Contains the result of the task failure, which is identical in function
to registering the result. Doing so automatically like this saves the user
from having to register every result in a block and then trying to figure
out which result had the failure
Similar to the way try/except/finally work, these variables will not be
available in the `always` portion of a block unless there is a corresponding
`rescue` first.
Fixes#12341
Prompt search logic is now localized to the ios shared module instead
of using the common regexps in the shell module. This resolves a number
of problems with ios modules functioning properly
The changes to chown/chmod were broken on Mac (-R was being appended to the end of the command- OSX requires it before the file list).
A number of base action remote setup commands were also blindly proceeding without checking for success. Added error raises for unrecoverable failure cases.
Previously, split_args() was not taking print/block/comment depth into account
when splitting things, meaning that if there was a quote character inside an
un-quoted variable (ie. {{ foo | some_filter(' ') }}), it was incorrectly
splitting on the quotes instead of continuing to append to the previous param.
Fixes#13630
A few of the docs fragments have the available choices for some params
defined as "BOOLEANS". Because choices accepts a list, it treats
"BOOLEANS" as an iterable and then generates a list composed of each
letter.
Instead, define the available choices as a list of `['yes', 'no']`,
as is common in most other modules.
If we're not delegating then we change _connection into a local
connection midway through the file but we don't change
_play_context.connection (no need to alter that). When we later check
it in process_remote() we need to know the actual connection, not the
connection that we thought we were going to use at the start of run().
So we have to use _connection.transport in process_remote(). The rest
of the places could use either one (because we have not yet changed to
a local connection) but we go ahead and switch those to
_connection.transport as well to avoid confusion in the future.
Fixes https://github.com/ansible/ansible-modules-core/issues/3136
* Can be configured in the ansible.cfg for tasks/handlers individually
* If an included filename contains no vars or loops, it will be expanded
in-place as if it were marked as static
* class_only was a keyword arg of get() and all() that was mistakenly
passed on to Plugins. Be sure to strip it from the keyword args
before instantiating Plugins. (Reworked API probably should either
not instantiate Plugins or take the args for the Plugin as a separate
list and a dict.)
* Checking required base_classes was only done in get() and only if
class_only was False (ie: that Plugin was instantiated). This meant
that different plugins could be found depending on whether the call
was to .get() or to all() and whether it was for classes or instances.
Fixed so that required base_classes are always checked.
Modules shouldn't need to import boto.ec2.
The check was to test if profile_name was supported by boto.
Two years after the introduction of the support, we will now
assume that if people are passing `profile`, they are using
a version of boto that supports it (this requirement is
already documented in the aws documentation fragment)
Also remove even older version check for `validate_certs`
Fixes#1901
* Make role param resolution follow the role dependency chain, rather
than using all roles within the play
* Also move params to be merged in after role vars in general, to match
our variable precedence rules
* Changes to the way var lookup is done in role helper methods for
get_vars(), get_inherited_vars(), and get_role_params() to make the
above possible without trampling on previously merged vars
Fixes#14472Fixes#14475
On none-Linux systems `get_distribution()` returns `None`, which fails in `fetch_url`, because the return value of `get_distribution()` is not checked before calling `lower()` on the result.
This commit address a number of minor updates the nxos shared module
* connect() is now lazy loaded
* parse inner output messages when errored
* code syntax cleanup
* Make documentation examples into code blocks
* Make code to call the subsets more general.
* Made min subset always execute (cannot disable it).
* Use a passed in modules parameter rather than global modules. This is needed for ziploader
* Remove unneeded __init__()
* Remove uneeded multiple inheritance from a base class
* gather_facts is now a list type
This commit adds a new feature to allow implementations of shell to
specify the command prompt regexp to be used. It allows adds a new
kwarg at instantiation to kick the remote device with a carriage return.
By default the kickstart flag is true but can be disabled by passing
kickstart=False.
This commit address to issues in the eos shard module. The first one
is a bug fix for returning the running config when the transport is eapi.
The shared module will now return config text instead of an object. The
second is a optimization that delays when the eos module connects to the
remote devices. This provies a performance enhancement when using
ssh since the module doesn't default to connecting immediately
Just including the `ssl` key in the config for MySQLdb.connect, causes it to check for the existence of SSL support. This patch only adds the key if one of the ssl configuration options is included.
On some switches, starting an SSH connection and immediately calling
recv() will result in a connection timeout. The switch requires some
input on the channel before it provides any prompt.
As such, this patch sends an empty command immediately upon connection,
triggering the switch to send a prompt which the shell can then
interpret.
Signed-off-by: Devananda van der Veen <devananda.vdv@gmail.com>
* Unit tests exposed a problem where nested blocks did not correctly
hit rescue/always portions of parent blocks
* Cleaned up logic in PlayIterator
* Unfortunately fixing the above exposed a potential problem in the
block integration tests, where a failure in an "always" section may
always lead to a failed state and the termination of execution
beyond that point, so certain parts of the block integration test
were disabled.
This implements solution #1 in the proposal #14860.
It only shows the diff if the task induced a change, which means that if the changed_when control overrides the task, not diff will be produced.
See #14860 for a rationale and the use-case.
porting @dominis 's ansible-shell tool from 1.9 and integrating it into ansible
added verbosity control
made more resilitent to several errors
added highlight color, to configurable colors
more resilient on exception and interruptions
prompt coloring, goes red and changes to # when using become = true and root
become setting is now explicit and not a toggle
* fetch_url shouldn't both accept follow_redirects and support follow_redircts via module.params
* Default follow_redirects for open_url should be 'urllib2'
* Add redirect test for get_url
This commit adds the multiline flag to the regexp search and match test
plugin. It defaults to re.M = False for backwards compatibility. To use
the multiline feature add multiline=True to the test filter
{{ config | search('^hostname', multiline=True) }}
main_q is not used anywhere in the codebase.
It is created in TaskQueueManager._initialize_processes, bundled with rslt_q
into TaskQueueManger._workers, later unwrapped in StrategyBase but not used.
This queue is closed in TaskQueueManger._cleanup_processes.
Historically, it is passed as a init parameter into WorkerProcess,
introduced in 62d7956, but this behavior is changed in 120b9a7.
Signed-off-by: 夏恺(Xia Kai) <xiaket@gmail.com>
Update the profile task callback plugin to include a fix for duplicate named tasks. Added additional features to adjust the number of tasks output and the sort order.
For example:
$ ansible web --list-hosts | head -n1
hosts (7):
ERROR! Unexpected Exception: [Errno 32] Broken pipe
Traceback (most recent call last):
File "/home/lamby/git/private/lamby-ansible2/.venv/bin/ansible", line 114, in <module>
display.display("to see the full traceback, use -vvv")
File "/home/lamby/git/private/lamby-ansible2/.venv/local/lib/python2.7/site-packages/ansible/utils/display.py", line 133, in display
sys.stdout.flush()
IOError: [Errno 32] Broken pipe
Such a pipe target will close up shop early when its seen enough input,
causing ansible to print an ugly traceback.
Signed-off-by: Chris Lamb <chris@chris-lamb.co.uk>
This commit fixes two bugs in the openswitch shared module. The first
bug was a wrong argument type for the use_ssl argument. It was set
to int and should be bool. The second changes the default ports for http
(was 80, now 8091) and https (was 443, now 18091). This change aligns
the default port values with the OS
This commit changes the key the ops_template will search for in order
to backup the current configuration to local disk on the Ansible control
host. This change was made to make ops_template consistent with the
other network template modules.
Note that this will break if we deal with non-utf8 paths. Fixing this
way because converting everythig to byte strings instead is a very
invasive task so it should be done as a specific feature to provide
support for non-utf8 paths at some point in the future (if needed).
This is the same fix we applied to v1.9 in PR #14565, however it does not fix#14678 completely !
The dictionaries are not being merged as tey are on v1.9.
The use of realpath means when following symlinks the actual path is
used when loading these files in the VariableManager, which may not
line up with the host or group name specified.
Fixes#14545
The find_mount_point function does not resolve the mount point of paths with a soft-link correctly and returns the wrong mount-point.
I have mounted an NFS filesystem on /nfs-mount. This directory contains a directory called "directory". I also created a soft-link to this last directory: /soft-link-to-directory -> /nfs-mount/directory. I created the following task to copy a file into /soft-link-to-directory:
- name: copy file to nfs-mount
copy:
src: "file"
dest: "/soft-link-to-directory/file"
This throws an exception:
invalid selinux context: [Errno 95] Operation not supported
This is caused by the find_mount_point function to return '/' as the mount point for '/soft-link-to-directory/file'. This should have been /nfs-mount. Because the find_mount_point returns the wrong mount-point, the is_special_selinux_path function does not recognise the file is on an NFS mount and tries to set the default SELinux context (system_u:object_r:default_t:s0), which fails. The context should have been: system_u:object_r:nfs_t:s0
Full Ansible output:
TASK [copy file to nfs-mount] **************************************************
fatal: [hostname]: FAILED! => {"changed": false, "checksum": "f34b60930a5d6d689cf49a4c16bd7f9806be608c", "cur_context": ["system_u", "object_r", "nfs_t", "s0"], "failed": true, "gid": 24170, "group": "foundation", "input_was": ["system_u", "object_r", "default_t", "s0"], "mode": "0644", "msg": "invalid selinux context: [Errno 95] Operation not supported", "new_context": ["system_u", "object_r", "default_t", "s0"], "owner": "root", "path": "/soft-link-to-directory/.ansible_tmpWCT6Z4file", "secontext": "system_u:object_r:nfs_t:s0", "size": 37, "state": "file", "uid": 0}
- now workers passes queue to task_executor so it can send back events per item and on retry attempt
- updated result class to pass along events to strategy
- base strategy updated to forward new events to callback
- callbacks now remove 'items' on final result but process them directly when invoked per item
- new callback method to deal with retry attempt messages (also now obeys nolog)
- updated tests to match new signature of task_executor
fixes#14558fixes#14072
* Fixes bug where the task was not marked as failed if the number of
retries were exceeded (#14461)
* Reorganizing logic to be a bit cleaner, and so retrie messages are
shown before sleeping (which makes way more sense)
Fixes#14461Fixes#14580
Prior to 75b6f61, we strictly limited variables we re-injected. After that
patch however, we re-injected everything which causes problems under certain
circumstances. For now, we'll continue to filter out some properties of
PlayContext for re-injection.
Fixes#14352
This is related to #14559, but only the part for Ansible v2.0
This commit makes merging empty dicts, or equal dicts more efficient.
I noticed that while debugging merge_hash a lot of merges related to empty dictionaries and sometimes also identical dictionaries.
will display on certain verbosity levels, both playbook/file info
and non empty options with which it's running.
avoid errors when not using CLI classes
The setup module calls /bin/lsblk once for each device appearing in the /etc/mtab file. However, the same device appears there mutliple times when the system uses bind-mounts. As a result, /bin/lsblk is being called repeatedly to get the uuid of the same device.
On a system with many mounts, this leads to a TimeoutError in the get_mount_facts function of the setup module as described in #14551.
Fixes#14551
ansible_os_family on openSUSE Leap has the wrong value:
"ansible_os_family": "openSUSE Leap",
It should be:
"ansible_os_family": "Suse",
This change fixes that by adding the relevant key and ensuring that dict
lookups replace ' ' with '_' so the key does not contain a space.
This commit fixes a situation where connection errors would be caught
but no useful information display. The connection error is now caught
and emitted in a call to fail_json
This commit fixes a situation where connection errors would be caught
but no useful information display. The connection error is now caught
and emitted in a call to fail_json
This commit fixes a situation where connection errors would be caught
but no useful information display. The connection error is now caught
and emitted in a call to fail_json
This commit fixes a situation where connection errors would be caught
but no useful information display. The connection error is now caught
and emitted in a call to fail_json
This commit fixes a situation where connection errors would be caught
but no useful information display. The connection error is now caught
and emitted in a call to fail_json
- added new function for action plugins this avoids the very fragile checksum code that is shell dependant.
- ported copy module to it
- converted assemble to new stat function
- some corrections and ported temlpate
- updated old checksum function to use new stat one under the hood
- documented revamped remote checksum method
When working around "bad systems that insist on not allowing
updates in an atomic manner", we should not run previous exception
management code that tries to perform atomic move in case of
exception since the dirty non atomic move has already been
performed.
* Fix the way task_include fields were created and copied
* Have blocks get_dep_chain() look at task_include's blocks for proper
dep chain inheritance
* Fix the way task_include fields are copied to prevent a recursive
degradation
Fixes#14460
This adds a new action plugin iosxr_template that allows the
iosxr_template module to pass network device configurations through the
template engine. It also allows configurations to be backed up.
* Make sure dep chains are checked recursively for nested blocks
* Fixing iterator is_failed() check to make sure we're not in a
rescue block before returning True
* Use is_failed() to test whether a host should be added to the TQM
failed_hosts list
* Use is_failed() when compiling the list of hosts left to iterate
over in both the linear and free strategies
Fixes#14222
- moved to base cli class to handle centrally and duplicate less code
- now avoids duplication and reiteration of signal handler by reassigning it
- left note on how to do non-graceful in case we add in future
as I won't remember everything i did here and don't want to 'relearn' it.
- adhoc now terminates gracefully
- avoid race condition on terminations by ignoring errors if
worker might have been reaped between checking if active and termination call
- ansible-playbook now properly exits on sigint/term
- adhoc and playbook now give exceptions that we should not normally capture
and rely on top level finally to reap children
- handle systemexit breaks in workers
- added debug to see at which frame we exit
partial fix for #14346
* Raise an error if the action is using BYPASS_HOST_LOOP, to prevent
unexpected behavior from those actions
* Show a warning regarding tasks marked as run_once, as the free strategy
does not yet support that behavior
* Minor tweak to linear strategies run_once code to make sure we don't
raise an error if an action isn't found
* If the internal value is None, do not add the variable
* Make sure all aliases for a given variable name are set (if they're
not already set in the dictionary)
Fixes#14310
just 'cause people build bad systems that insist on not allowing
updates in an atomic manner and force us to do them in a very
unsafe way that has race conditions and can lead to many issues.
if using this option you should really be opening a bug report with
the system that only allows for this type of update.
and now i shower though i doubt i'll feel clean
* Fixed a bug in PlayIterator when ITERATING_ALWAYS, where the block
was advanced but the incorrect data structure elements were cleared
* Cleaned up the logic of is_failed() in PlayIterator
* Fixed a bug in the free strategy which had not been updated to use
the base strategy _execute_meta() method
* Stopped strategies from using is_failed() to determine if tasks should
still be fetched for a host
Fixes#14040
The net_config local action handles templating for network configuration
file. It will also allow network device configurations to be backed up
to the control host
Note: this plugin was originally named net_config but has been refactored to
net_template
now deprecation message appears with variable name in all spots where this occurs
debug's var= option is excluded as this is only place where bare variables shold actually
be accepted.
it was assumed it could only be a dict or string (it starts out as a list)
also a 2nd assumption that bare vars only would appear in one of the dict keys.
removed deprecation warnings from here as they should be signaled in the bare conversion itself.
Adds new local action ops_config for handling openswitch configurations using
either dc or cli based configurations. Implements the common net_config
local action.
Note this refactors the ops_config plugin to ops_template
Adds a new local action ios_config for working with cisco ios configuration
files. Implements the common net_confing local action
Note this plugin was refactored from ios_config to ios_template
Adds new local action for working with cisco nxos configurations. Implemements
the net_config local action.
Note this action plugin was refactored from nxos_config to nxos_template
Adds a new local action for eos_config module to handle templating configs
and backing up running configurations. Implements the local action
net_config
Note this action was refactored from eos_config to eos_template
This fixes a minor bug in the nxos config module to ensure that both the
cli and nxapi transport return the running config as a string and not
a list object.
The module docs and vault changes solve issues where tracebacks can
happen. The galaxy changes are mostly refactoring to be more pythonic
with a small chance that a unicode traceback could have occurred there
without the changes. The change in __init__.py when we actually call
the pager makes things more robust but could hide places where we had
bytes coming in already so I didn't want to change that without auditing
where the text was coming from.
Fixes#14178
This addresses two issues with the nxos shared module. The first issue is
argument precedence checking. The module should prefer explicit arguments
over arguments passed vi the provider. This is now fixed to honor that
precedence. The second issue is collecting output from nxapi and returning
the response. Prior to this change the entire json structure was returned.
Now just the output is returned to align it better with cli based output
The eos shared module should prefer to use explicit task arguments over
arguments provided through the provider. This fixes a problem where
that was not the case
So far, when a 'diff' dict is returned with module results, it is
checked for 'before' and 'after' texts, which are processed in
_get_diff() by python difflib. This generates the changes to display
when CLI users specify --diff.
However, some modules will generate changes that cannot easily be
expressed in a conventional diff. One example is the output of the
synchronize module, which presents changed files in a common log format
as in `rsync --itemize-changes`.
Add a check for a diff['prepared'] key, which can contain prepared diff text
from modules.
* In 2.0.0.x become was reversed for synchronize. It was happening on
the local machine instead of the remote machine. This restores the
ansible-1.9.x behaviour of doing become on the remote machine.
However, there's aspects of this that are hacky (no hackier than
ansible-1.9 but not using 2.0 features). The big problem is that it
does not understand any become method except sudo. I'm willing to use
a partial fix now because we don't want people to get used to the
reversed semantics in their playbooks.
* synchronize copying to the wrong host when inventory_hostname is
localhost
* Fix problem with unicode arguments (first seen as a bug on synchronize)
Fixes#14041Fixes#13825
Role definitions typically require params to be different from those
which are specified as FieldAttributes on the playbook classes used
for roles, however a certain subset should be allowed (typically those
used for connection stuff).
Fixes#14095
The dep chain for roles created during the compile step had bugs, in
which the dep chain was overwriten and the original tasks in the role
were not assigned a dep chain. This lead to problems in determining
whether roles had already run when in a "diamond" structure, and in
some cases roles were not correctly getting variables from parents.
Fixes#14046
by moving to en-bloc unicode conversion to act on scripts stdout
Both python-json and simplejson always return unicode strings when using
their loads() method on unicode strings. This is true at least since
2009. This makes checking each substring unnecessary, because we do not
need to recursively check the strings contained in the inventory dict
later one-by-one
This commit makes parsing of large dynamic inventory at least 2 seconds
faster.
cf: https://github.com/towolf/ansible-large-inventory-testcase
This prevents a bug where the existing cache outside of the class
is not cleared when creating a new Inventory object. This only really
affects people using the API directly right now, but wanted to fix it
to prevent weird errors from popping up.
Instead of bombing out of the strategy, we now properly mark hosts failed
so that the play iterator can handle block rescue/always properly.
Fixes#14024
When using a playbook-level include, we now catch any errors raised during
the conditional evaluation step and set a flag to indicate we need to pass
those conditionals on to the included play (most likely because they contain
inventory variables for evaluation).
Fixes#14003
This causes problems when fetching parent attributes, as the include
was being skipped because the parent block would fetch the attribute
from the parent play first.
Fixes#13872
this was taken out in an effort to default to the user's shell but creates issues as this is not known ahead of time
and its painful to set executable and shell_type for all servers, it should only be needed for those that restrict the user
to specific shells and when /bin/sh is not available. raw and command may still bypass this by explicitly passing None.
fixes#13882
still conditional
The provider argument accepts the set of device common arguments as a
dict object. Individual connection arguments can still be included and
take priority over the provider argument. This update includes additions
to the nxos doc fragment
New argument `provider` added to the ios shared module that provides
the ability to pass all of the common ios arguments as a dict. This commit
includes some minor bugfixes and refactoring of names. It also includes
udpates to the ios documentation fragment for the new argument
Adds a new argument `provider` to the eos shared module and updates the
eos doc fragment. This commit includes some additional minor fixes and
code refactors for naming conventions. The `provider` argument allows the
shared module arguments to be passed as a dict object instead of having
to pass each argument invididually.
This commit adds a new argument `provider` to the iosxr shared module that
allows common connection parameters to be passed as a dict object. The
constraints on the args still applies. This commit also updates the iosxr
doc fragment.
Adds new argument `provider` to the openswitch shared module. The provider
argument can pass all openswitch connection arguments as a dict object. This
update includes adding the provider argument to the openswitch doc fragment
This commit adds a new argument `provider` to the junos shared module. The
argument allows the set of common connection args to be passed to the
junos shared module. This commit also updates the junos doc fragment
This commit provides an argument to provide a path to the private key
file. This will allow paramiko to use the key file as opposed to only
username / password combinations for CLI connections.
Letting it pass would just cause an error later on (no such file found)
so it's better to catch it here and know that we have users dealing with
non-utf8 pathnames than to have to track it down from later on.
Note that the fix for display normalizing to unicode is correct but the
fix for pathnames is probably not. Changing pathnames to unicode type
means that we will handle utf8 pathnames fine but pathnames can be any
sequence of bytes that do not contain null. We do not handle sequences
of bytes that are not valid utf8 here. To do that we need to revamp the
handling of basedir and paths to transform to bytes instead of unicode.
Didn't want to do that in 2.0.x as it will potentially introduce other
bugs as we find all the places that we combine basedir with other path
elements. Since no one has raised that as an issue thus far so it's not
something we need to handle yet. But it's something to keep in mind for
the future.
To test utf8 handling, create a utf8 directory and run a playbook from
within there.
To test non-utf8 handling (currently doesn't work as stated above), create
a directory with non-utf8 chars an run a playbook from there. In bash,
create that directory like this: mkdir $'\377'
Fixes#13937
* Don't re-use the existing connection if the remote_addr field of
the play context has changed
* When overriding variables in PlayContext (from task/variables),
don't set the same attribute based on a different variable name
if we had already previously set it from another variable name
Fixes#13880
* Relocate the assignment of the host address to the remote_addr field
in the play context, which was only done when the connection was created
(it's now done after the post_validate() is called on the play context)
* Make the assignment of the play context to the connection an else, since
it's not required if the connection is not reused
This is because we pass arguments to non-newstyle modules via an
external file. If we pipeline, then the interpreter thinks it has to
run the arguments as the script instead of what is piped in via stdin.
keeps backwards compat by not removing the previouslly non grammer matching states
and introduces new ones so user can decide which one he wants
(or keep both and still be inconsistent to annoy those that care)
If this isnt updated, the _connection is reused, and thus has an outdated _play_context
This results in outdated `success_key` and `prompt` causing issues if sudo is run in a loop
Refer to the issue #13763 for more debugging and details
The nxapi module has been superseded by the nxos shared module and is not longer needed. This commit removes (deletes) nxapi from module_utils. All custom modules that have used nxapi should be using nxos instead.
This commit adds a new shared module that parses network device configuration
files. It is used to build modules that work with the various supported
network device operating systems
This commit adds a new shared module for working with network devices running
the Juniper Junos operating system. The commit includes a new document
fragment junos to be used when building modules. The junos shared module
currently only supports CLI
This commit adds a new shared module openswitch for building modules that
work with OpenSwitch. This shared module supports connectivity to
OpenSwitch devices over SSH, CLI or REST. It also adds an openswitch
documentation fragment for use in modules
This commit refactors the nxapi into a new shared module nxos that supports
connectivity over both ssh (cli) and nxapi. It supercedes the nxapi shared
module and removes it from module_utils. This commit also adds a
documentation fragement supporting the nxos shared module
This commit adds a new shared module for working with Cisco IOS XR devices over
CLI (SSH). It also provides a documentation fragement for the commmon arguments
provided by the iosxr module.
This update refactor the ios shared module to use the new shell shared
library instead of issh and cli. It also adds the ios documentation
fragment to be used when building ios based modules.
This adds a shared module for communicating with Arista EOS devices over
SSH (cli) or JSON-RPC (eapi). This modules replaces the eapi.py module
previously added to module_utils. This commit includes a documentation
fragment that describes the eos common arguments
pushed it to use the existing propmpt from display and moved the vars prompt code there also for uniformity
changed vars_prompt to check extra vars vs the empty play.vars to restore 1.9 behaviour
sipmlified the code as it didn't need to check for syntax again (tqm is made none prior based on that)
fixes#13770
Still is a warning as we don't want to repeat it multiple times nor additional callbacks to stop ansible execution.
hopefully we can avoid shipping w/o exceptions in the default/minimal callbacks...
Also added feature that now allows for 'preformated' strings passed to warning
This commit add a new shared module shell that is used to build connections
to network devices that operate in a CLI environment. This commit supercedes
the issh.py and cli.py commits and removes them from module_utils.
and without hosts and vars
Without this patch, the simplified syntax is triggered when a group
is defined like this:
"platforms": {
"children": [
"cloudstack"
]
}
Which results in a group 'platforms' with 1 host 'platforms'.
more details in https://github.com/ansible/ansible/issues/13655
Previously, the lookup plugin passes all its keyword arguments to
credstash's `getSecret`; while this works for passing the standard
parameters (version, region and table), this does not allow passing
a dictionary of key-value pairs as `getSecret`'s context parameter.
Instead, pop `version`, `region` and `table` from `kwargs`, supplying
the default value if they are not defined, and pass the rest of the `kwargs`
as the `context` parameter.
* Added additional methods to the iterator code to assess host failures
while also taking into account the block rescue/always states
* Fixed bugs in the free strategy, where results were not always being
processed after being collected
* Added some prettier printing to the state output from iterator
Fixes#13699
commit 24efa310b58c431b4d888a6315d1285da918f670
Author: James Cammarata <jimi@sngx.net>
Date: Tue Dec 29 11:23:52 2015 -0500
Adding an additional test for copy exclusion
Adds a negative test for the situation when an exclusion doesn't
exist in the target to be copied.
commit 643ba054877cf042177d65e6e2958178bdd2fe88
Merge: e6ee59f 66a8f7e
Author: James Cammarata <jimi@sngx.net>
Date: Tue Dec 29 10:59:18 2015 -0500
Merge branch 'speedup' of https://github.com/chrismeyersfsu/ansible into chrismeyersfsu-speedup
commit 66a8f7e873ca90f7848e47b04d9b62aed23a45df
Author: Chris Meyers <chris.meyers.fsu@gmail.com>
Date: Mon Dec 28 09:47:00 2015 -0500
better api and tests added
* _copy_results = deepcopy for better performance
* _copy_results_exclude to deepcopy but exclude certain fields. Pop
fields that do not need to be deep copied. Re-assign popped fields
after deep copy so we don't modify the original, to be copied, object.
* _copy_results_exclude unit tests
commit 93490960ff4e75f38a7cc6f6d49f10f949f1a7da
Author: Chris Meyers <chris.meyers.fsu@gmail.com>
Date: Fri Dec 25 23:17:26 2015 -0600
remove uneeded deepcopy fields
* Fix to error if validate_cert is True and python doesn't support it.
* Only globally disable certificate checking if really needed. Use
bigip verify parameter if available instead.
* Remove public disable certificate function to make it less likely
people will attempt to reuse that
* now module errors clearly state msg=MODULE FAILURE
* module's stdout and stderr go into module_stdout and module_stderr keys
which only appear during parsing failure
* invocation module_args are deleted from results provided by action
plugin as errors can keep us from overwriting and then disclosing info that
was meant to be kept hidden due to no_log
* fixed invocation module_args set by basic.py as it was creating different
keys as the invocation in action plugin base.
* results now merge
This plugin filters output for any task that is 'ok' or 'skipped'.
It works by subclassing the 'default' stdout callback plugin and
overriding certain functions. It will suppress display of the task
banner until there is a 'changed' or 'failed' result or an
unreachable host.
* Changed parse_addresses to throw exceptions instead of passing None
* Switched callers to trap and pass through the original values.
* Added very verbose notice
* Look at deprecating this and possibly validate at plugin instead
fixes#13608
Because the fail_state is potentially non-zero in these block sections,
the prior logic led to included tasks not being inserted at all.
Related issue: #13605
This was added in 1.9 and 2.0 tried to copy, but since it cannot
obey no_log restrictions I commented it out. I did not remove as
it is still very useful for module invocation debugging.
* Saving of the registered variable was occuring after the tests for
changed/failed_when.
* Each of the above fields and until were being post_validated too early,
so variables which were not defined at that time were causing task
failures.
Fixes#13591
Environments were not being templated individually, so a variable environment
value was causing the exception regarding dicts to be hit. Also, environments
as inherited were coming through with the tasks listed first, followed by the
parents, so they were being merged backwards. Reversing the list of environments
fixed this.
Also fixes a bug where we were passing an incorrect number of parameters to
_do_handler_run() when processing an include file in a handler task/block.
Fixes#13560
Otherwise, each relative include path is checked on its own, rather
than in relation to the (possibly relative) path of its parent, meaning
includes multiple level deep may fail to find the correct (or any) file.
Fixes#13472
The current ssh shared module forces only password based authentication. This
change will allow the ssh module to use keys if a password is not provided.
We were logging the command to be executed many times, which made debug
logs very hard to read. Now we do it only once.
Also makes the logged ssh command line cut-and-paste-able (the lack of
which has confused a number of people by now; the problem being that we
pass the command as a single argument to execve(), so it doesn't need an
extra level of quoting as it does when you try to run it by hand).
moved from the field attribute declaration and created a placeholder
which then is resolved in the field attribute class.
this is to avoid unwanted persistent of the defaults across objects which introduces
stealth bugs when multiple objects of the same kind are used in succession while
not overriding the default values.
OS X El Capitan moved the /etc/ssh_* files into /etc/ssh/. This fix
adds a distribution version check for Darwin to set the keydir
appropriately on El Capitan and later.
tasks were overriding commandline with their defaults, not with the
explicit setting, removed the setting of defaults from task init and
pushed down to play context at last possible moment.
fixes#13362
Ansible previously added hosts to the host list multiple times for commands
like `ansible -i 'localhost,' -c local -m ping 'localhost,localhost'
--list-hosts`.
8d5f36a fixed the obvious error, but still added the un-deduplicated list to a
cache, so all future invocations of get_hosts() would retrieve a
non-deduplicated list.
This caused problems down the line: For some reason, Ansible only ever
schedules "flush_handlers" tasks (instead of scheduling any actual tasks from
the playbook) for hosts that are contained in the host lists multiple times.
This probably happens because the host states are stored in a dictionary
indexed by the hostnames, so duplicate hostname would cause the state to be
overwritten by subsequent invocations of … something.
* sudo was not working, now it supports full become
* now default checkout dir works, not only when specifying
* paths for checkout dir get expanded
* fixed limit options for playbook
* added verbose and debug info
This should fix issues with fish shell users as && and || are
not valid syntax, fish uses actual 'and' and 'or' programs.
Also updated to allow for fish backticks pushed quotes to subshell,
fish seems to handle spaces w/o them.
Lastly, removed encompassing subshell () for fish compatibility.
fixes#13199
This patch fixes a bug in module_utils/ios.py where the the wrong shared
module arguments are being generated. This bug prevented the shared module
from operating correctly. This patch should be generally applied.
* Move self._tqm.load_callbacks() earlier to ensure that v2_on_playbook_start can fire
* Pass the playbook instance to v2_on_playbook_start
* Add a _file_name instance attribute to the playbook
At its most basic, this is nothing more than an array or hash lookup,
but when used in conjunction with map, it is very useful. For example,
while constructing an "ssh-keyscan …" command to update known_hosts on
all hosts in a group, one can get a list of IP addresses with:
groups['x']|map('extract', hostvars, 'ec2_ip_address')|list
This returns hostvars[a].ec2_ip_address, hostvars[b].ec2_ip_address, and
so on. You can even specify an array of keys for a recursive lookup, and
mix string and integer keys depending on what you're looking up:
['localhost']|map('extract', hostvars, ['vars','group_names',0])|first
== hostvars['localhost']['vars']['group_names'][0]
== 'ungrouped'
Includes documentation and tests.
The comment was taken literally from lib/plugins/strategy/linear.py and
makes no sense in free.py where we have no noop tasks.
Also update the debug messages.
This patch fixes an issue with the common args dict in the eapi shared
module. This patch is required for the eapi shared module to be properly
imported and is therefore should be applied to all instances.
This commit changes the way modules create an instance of AnsibleModule to
now use a common function, eapi_module. This function will now automatically
append the common argument spec to the module argument_spec. Module
arguments can override common module arguments
Pipelining is a *significant* performance benefit, because each task can
be completed with a single SSH connection (vs. one ssh connection at the
start to mkdir, plus one sftp and one ssh per task).
Pipelining is disabled by default in Ansible because it conflicts with
the use of sudo if 'Defaults requiretty' is set in /etc/sudoers (as it
is on Red Hat) and su (which always requires a tty).
We can (and already do) make sudo/su happy by using "ssh -t" to allocate
a tty, but then the python interpreter goes into interactive mode and is
unhappy with module source being written to its stdin, per the following
comment from connections/ssh.py:
# we can only use tty when we are not pipelining the modules.
# piping data into /usr/bin/python inside a tty automatically
# invokes the python interactive-mode but the modules are not
# compatible with the interactive-mode ("unexpected indent"
# mainly because of empty lines)
Instead of the (current) drastic solution of turning off pipelining when
we use a tty, we can instead use a tty but suppress the behaviour of the
Python interpreter to switch to interactive mode. The easiest way to do
this is to make its stdin *not* be a tty, e.g. with cat|python.
This works, but there's a problem: ssh will ignore -t if its input isn't
really a tty. So we could open a pseudo-tty and use that as ssh's stdin,
but if we then write Python source into it, it's all echoed back to us
(because we're a tty). So we have to use -tt to force tty allocation; in
that case, however, ssh puts the tty into "raw" mode (~ICANON), so there
is no good way for the process on the other end to detect EOF on stdin.
So if we do:
echo -e "print('hello world')\n"|ssh -tt someho.st "cat|python"
…it hangs forever, because cat keeps on reading input even after we've
closed our pipe into ssh's stdin. We can get around this by writing a
special __EOF__ marker after writing in_data, and doing this:
echo -e "print('hello world')\n__EOF__\n"|ssh -tt someho.st "sed -ne '/__EOF__/q' -e p|python"
This works fine, but in fact I use a clever python one-liner by mgedmin
to achieve the same effect without depending on sed (at the expense of a
much longer command line, alas; Python really isn't one-liner-friendly).
We also enable pipelining by default as a consequence.
since all the --ask pass options end up triggering the same code
and are functionally equivalent, ignore them when it comes to checking
privilege escalation conflicts. This allows using -K when --become-method=su
and so on.
The secret_key parameter especially can contain non-ascii characters and
will throw an error if such a string is passed as a byte str.
Potential fix for #13303
It is natural that an argument_spec with choises=BOOLEAN accepts
boolean literal (True, False) though the current implementation
allows only string or int.
* StandardError doesn't exist in python3
* because it is the root of builtin expections, we can't catch it
separate from the builtin exceptions
* It doesn't tell us anything about the error being thrown as it's too
generic
