* Add 2.0-2.3 facts api compat (ansible_facts(), get_all_facts())
These are intended to provide compatibilty for modules that
use 'ansible.module_utils.facts.ansible_facts' and
'ansible.module_utils.facts.get_all_facts' from 2.0-2.3 facts
API.
Fixes#25686
Some related changes/fixes needed to provide the compat api:
* rm ansible.constants import from module_utils.facts.compat
Just use a hard coded default for gather_subset/gather_timeout
instead of trying to load it from non existent config if the
module params dont include it.
* include 'external' collectors in compat ansible_facts()
* Add facter/ohai back to the valid collector classes
facter/ohai had gotten removed from the default_collectors
class used as the default list for all_collector_classes by
setup.py and compat.py
That made gather_subset['facter'] fail.
* Add aggregate parameter validation
aggregate parameter validation will support checking each individual dict
to resolve conditions for aliases, no_log, mutually_exclusive,
required, type check, values, required_together, required_one_of
and required_if conditions in argspec. It will also set default values.
eg:
tasks:
- name: Configure interface attribute with aggregate
net_interface:
aggregate:
- {name: ge-0/0/1, description: test-interface-1, duplex: full, state: present}
- {name: ge-0/0/2, description: test-interface-2, active: False}
register: response
purge: Yes
Usage:
```
from ansible.module_utils.network_common import AggregateCollection
transform = AggregateCollection(module)
param = transform(module.params.get('aggregate'))
```
Aggregate allows supports for `purge` parameter, it will instruct the module
to remove resources from remote device that hasn’t been explicitly
defined in aggregate. This is not supported by with_* iterators
Also, it improves performace as compared to with_* iterator for network device
that has seperate candidate and running datastore.
For with_* iteration the sequence of operartion is
load-config-1 (candidate db) -> commit (running db) -> load_config-2
(candidate db) -> commit (running db) ...
With aggregate the sequence of operation is
load-config-1 (candidate db) -> load-config-2 (candidate db) -> commit
(running db)
As commit is executed only once per task for aggregate it has
huge perfomance benefit for large configurations.
* Fix CI issues
* Fix review comments
* Add support for options validation for aliases, no_log,
mutually_exclusive, required, type check, value check,
required_together, required_one_of and required_if
conditions in sub-argspec.
* Add unit test for options in argspec.
* Reverted aggregate implementaion.
* Minor change
* Add multi-level argspec support
* Multi-level argspec support with module's top most
conditionals options.
* Fix unit test failure
* Add parent context in errors for sub options
* Resolve merge conflict
* Fix CI issue
* Make camel_to_snake work on capitalized plurals
`TargetGroupARNs` should become `target_group_arns`, not
`target_group_ar_ns`
Promote `camel_to_snake` to top layer function but prefix
it with an underscore.
Add tests for improved `_camel_to_snake` function.
Reduce use of `re.compile` as it makes no sense when the
compilation result is not reused.
* Remove unused LooseVersion check
* Fix PLURALs case for camel_to_snake
Also renamed EXPECTED_CAMELIZATION to EXPECTED_SNAKIFICATION
* ACI module_utils library for ACI modules
This PR includes:
- the ACI argument_spec
- an aci_login function
- an experimental aci_request function
- an aci_response function
- included the ACI team
* New prototype using ACIModule
This PR includes:
- A new ACIModule object with various useful methods
Fixes#13243
** Add --vault-id to name/identify multiple vault passwords
Use --vault-id to indicate id and path/type
--vault-id=prompt # prompt for default vault id password
--vault-id=myorg@prompt # prompt for a vault_id named 'myorg'
--vault-id=a_password_file # load ./a_password_file for default id
--vault-id=myorg@a_password_file # load file for 'myorg' vault id
vault_id's are created implicitly for existing --vault-password-file
and --ask-vault-pass options.
Vault ids are just for UX purposes and bookkeeping. Only the vault
payload and the password bytestring is needed to decrypt a
vault blob.
Replace passing password around everywhere with
a VaultSecrets object.
If we specify a vault_id, mention that in password prompts
Specifying multiple -vault-password-files will
now try each until one works
** Rev vault format in a backwards compatible way
The 1.2 vault format adds the vault_id to the header line
of the vault text. This is backwards compatible with older
versions of ansible. Old versions will just ignore it and
treat it as the default (and only) vault id.
Note: only 2.4+ supports multiple vault passwords, so while
earlier ansible versions can read the vault-1.2 format, it
does not make them magically support multiple vault passwords.
use 1.1 format for 'default' vault_id
Vaulted items that need to include a vault_id will be
written in 1.2 format.
If we set a new DEFAULT_VAULT_IDENTITY, then the default will
use version 1.2
vault will only use a vault_id if one is specified. So if none
is specified and C.DEFAULT_VAULT_IDENTITY is 'default'
we use the old format.
** Changes/refactors needed to implement multiple vault passwords
raise exceptions on decrypt fail, check vault id early
split out parsing the vault plaintext envelope (with the
sha/original plaintext) to _split_plaintext_envelope()
some cli fixups for specifying multiple paths in
the unfrack_paths optparse callback
fix py3 dict.keys() 'dict_keys object is not indexable' error
pluralize cli.options.vault_password_file -> vault_password_files
pluralize cli.options.new_vault_password_file -> new_vault_password_files
pluralize cli.options.vault_id -> cli.options.vault_ids
** Add a config option (vault_id_match) to force vault id matching.
With 'vault_id_match=True' and an ansible
vault that provides a vault_id, then decryption will require
that a matching vault_id is required. (via
--vault-id=my_vault_id@password_file, for ex).
In other words, if the config option is true, then only
the vault secrets with matching vault ids are candidates for
decrypting a vault. If option is false (the default), then
all of the provided vault secrets will be selected.
If a user doesn't want all vault secrets to be tried to
decrypt any vault content, they can enable this option.
Note: The vault id used for the match is not encrypted or
cryptographically signed. It is just a label/id/nickname used
for referencing a specific vault secret.
* Module argument_spec now accepts a callable for the type argument, which is passed through and called with the value when appropriate. On validation/conversion failure, the name of the callable (or its type as a fallback) is used in the error message.
* adds basic smoke tests for custom callable validator functionality
* Enable the pylint no-name-in-module check. Checks that identifiers in
imports actually exist. When we do this, we also have to ignore
_MovedItems used in our bundled six. This means pylint won't check
for bad imports below ansible.module_utils.six.moves but that's
something that pylint punts on with a system copy of six so this is
still an improvement.
* Remove automatic use of system six. The exec in the six code which
tried to use a system library if available destroyed pylint's ability
to check for imports of identifiers which did not exist (the
no-name-in-module check). That test is important enough that we
should sacrifice the bundling detection in favour of the test.
Distributions that want to unbundle six can replace the bundled six in
ansible/module_utils/six/__init__.py to unbundle. however, be aware
that six is tricky to unbundle. They may want to base their efforts
off the code we were using:
2fff690caa/lib/ansible/module_utils/six/__init__.py
* Update tests for new location of bundled six Several code-smell tests
whitelist the bundled six library. Update the path to the library so
that they work.
* Also check for basestring in modules as the enabled pylint tests will
also point out basestring usage for us.
* Nuage module and unit tests with requested changes
* Cleanup of imports
* Adding check on python version
* Adding import try and catch wrappers
* Cleanup of requirements and adding integration tests
* Using pypi package for simulator
* Cleanup of requirements and adding integration tests
* Adding aliases for integration tests
* Adding module to import sanity test skip list
* Revert "Adding module to import sanity test skip list"
This reverts commit eab23af8c5ca7c503af63c05610b5db66d31fae4.
* Adding check for importlib and cleanup of requirements
* Move tests to their own file
* Port to a pytest parametrized test so it's easier to define new tests
* Now that _symbolic_mode_to_octal is a classmethod, we don't have to
instantiate an AnsibleModule to test it.
* Add tests for #14994, having more than one operator per role and umask
chmod
* add unit test: nested dynamic includes
* nested dynamic includes: avoid AnsibleFileNotFound error
Error was:
Unable to retrieve file contents
Could not find or access 'include2.yml'
Before 8f758204cf, at the end of
'path_dwim_relative' method, the 'search' variable contained amongst
others paths:
'/tmp/roles/testrole/tasks/tasks/included.yml' and
'/tmp/roles/testrole/tasks/included.yml'.
The commit mentioned before removed the last one despite the method
docstrings specify 'with or without explicitly named dirname subdirs'.
* add integration test: nested includes
* Adding ciscowlc_command module and unit tests.
* Adding __init__.py for unit test.
* Fixing PEP8 W503.
* Renaming module from ciscowlc_command to aire_command.
* Renaming aire_command to aireos_command.
* Adding aruba_command module along with unit tests.
* Fixing PEP8 E303 too many blank lines.
* Adding default for timeout.
* Removing unused arguments. Moving default for timeout argument. Fixing cliconf to find hostname.
* Fixing PEP8 E302.
* Add unit tests for parted module
Test the current expected behavior of the module:
- mock parted() and get_device_info()
- Use some of the examples and test the 'script' passed to parted.
- mock check_parted_label() to return false, as if parted version is > 3.1
- assert get_device_info output is correct
Current implementation of the module runs parted several time while going
through all parameters (flags, name, ...). Between calls it uses get_device_info
to update the dictionary. Use check_mode for some of the tests to force module
to go through all the parameters even is dictionary is not updated.
* test_parted.py: add "name" param into expected results
since 78fff751ab, parse_partition_info
fetch the partition name. This commit adds 'name' key and value into
the expected results.
Consolidate the module_utils, constants, and config functions that
convert values into booleans into a single function in module_utils.
Port code to use the module_utils.validate.convert_bool.boolean function
isntead of mk_boolean.
* aci_rest: New module to access Cisco ACI
This PR includes:
- Relicense as GPLv3+
- Check-mode support
- Cosmetic changes to documentation
- Examples in YAML format
- Removal of incorrect requirements (for this module)
- Do not log passwords
- Implement native fetch_url instead of requests
- Use standard hostname, username and password parameters
- Add alias src for parameter config_file
- Add mutual exclusive content option for inline data (and show some inline examples)
- Add timeout parameter
- Add validate_certs parameter
- Handling ACI result output (identical for JSON as XML input)
- Parse/expose ACI error output to user
* Lower case method, add use_ssl, Use python dicts
This commit includes:
- Use lowercase method names
- Add `use_ssl` parameter (not the `protocol` parameter)
- Use a python dict for the request data (not a JSON string)
- Documentation improvements
* Ensure one of 'content' or 'src' is provided
* Fix issue with totalCount being a string in JSON
This fixes the problem with JSON output where totalCount is a string and
not an integer.
This fixesjedelman8/aci-ansible#7
* Improve code documentation
* Improve error handling and module response
* Small typo
* Improve documentation and examples
* Keep protocol parameter, but deprecate it
* Extrude aci functions from module_utils
* aci_rest: Add unit tests
* add first, last and next usable
* add usable ip filters
* add size usable, range usable and wildcard
* add ip prefix and netmask filter
* add network formatting and check if ip in subnet
* clean up order, add comments
* fix pep8
* update format by index
* clean up and updates from jmcgill298
