* zfs.py: treated received properties as local and added diff mode support
If you use "zfs set" to explicitly set ZFS properties, they are marked as from source "local". If ZFS properties are implicitly set by using "zfs send" and "zfs receive", for example as part of a template based installation, they are marked as from source "received". But as there is no technical difference between both types of them, the “received” ZFS properties should also be considered “local”. Otherwise Ansible would detect changes, which aren’t actual changes. Therefore I changed line 202/207 to reflect this.
For us it’s quite important, that Ansible modules support the diff mode in order to qualify changes. Therefore I added some code lines to address this.
* added changelog fragment for PR #502
* fixed typos in changelog fragment for PR #502
* minor changes in changelog fragment for PR #502
* added link to pull request in changelog fragment for PR #502
* extended the diff data structure to always include the name of the zfs filesystem
* added code to also maintain the diff data structure after a change
* reverted back some code lines for better code readability
* added an extra dict in the diff data structure to hold the zfs properties
* udm_dns_record: Fix handling of PTR records (#3244)
Before, it was not possible to manage PTR records in Univention DNS,
due to broken zone lookups and improper used parameters of the object.
This patch fixes the PTR handling, allowing both v4 and v6 entries.
* udm_dns_record: [doc] add changelog fragment
* udm_dns_record: [fix] validation errors
* udm_dns_record: import ipaddress module conditionally (#3244)
* udm_dns_record: fix sanity check error, improve doc (#3244)
* udm_dns_record: Improve changes to meet community standards (#3244)
* snap - improved error handling
* added changelog fragment
* removed experiments left overs
* rolled back the smaller list of params for commands other than install
* Fixed incorrect VMID: cloning to an existing VM
During a cloning operation, if the destination VM already exists the VMID returned is not correct.
The VMID returned should be that of the destination VM and not that of the source VM (consistent with line 1230).
A playbook that relies on the returned VMID, for example, to perform other operations on the destination VM, will not work properly if it is unexpectedly interrupted.
* Add files via upload
* moved 3266-vmid-existing-target-clone.yml to changelogs/fragments/
replaced line separator CRLF -> LF
* storing vmid list in variable to avoid multiple API calls
* Linode Inventory can use full IP data from APIv4
- The Linode dynamic inventory module does not currently distinguish
between private and public IP addresses even though the Linode APIv4
contains this information. This change keeps the current behavior as
the default and adds an option to set `ip_style: api`. When set, this
option allows administrators to differentiate between private, public,
slaac, local_link, and pool network addresses providing a more nuanced
and granular view of the remote host's network information.
Signed-off-by: Kellin <kellin@retromud.org>
* Review - amend changelog details
- Adds a link back to this pull request
- Uses markdown styles for easier to read publishing in the changelogs
- Amends the wording style to match the existing changelog styles
Co-authored-by: Felix Fontein <felix@fontein.de>
* Add scope to example invocation
- Adds the `community.general` scope to invocation example
Co-authored-by: Felix Fontein <felix@fontein.de>
* Convert lamda to list comprehension
- Change the ip type filter from a lambda to a list comprehension
Co-authored-by: Felix Fontein <felix@fontein.de>
* Add punctuation to description sentence
- Adds a period to the end of the description sentence
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
If `api_token` is not set and config file exists, it will try to fetch
the value from the activated profile and fallback on default.
This should not break existing workflows.
* Add option for retry_servfail
cf. https://dnspython.readthedocs.io/en/latest/resolver-class.html#dns.resolver.Resolver.retry_servfail
Setting this option to `True` allows for the possibility of the lookup plugin to retry and thereby recover from potentially transient lookup failures, which would otherwise cause the task or play to bail with an unrecoverable exception.
* Create 3247-retry_servfail-for-dig
* documentation for `retry_servfail` option
* Rename 3247-retry_servfail-for-dig to 3247-retry_servfail-for-dig.yaml
* fix whitespace
* Update plugins/lookup/dig.py
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
* Update plugins/lookup/dig.py
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
* rm try/except block
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
* nmcli: Disallow Wi-Fi options not supported by nmcli
By querying nmcli directly
* Added changelog fragment
* Added tests
* Simplify `get_available_options()`
* Update changelogs/fragments/3141-disallow-options-unsupported-by-nmcli.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* Remove redundant `802-11-wireless` settings from test show outputs
* Update `mocked_wireless_create(mocker)`
* Update plugins/modules/net_tools/nmcli.py
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
* Address comment re. creating function & use nmcli naming conventions
I.E. `setting`.`property` = `value`
```
nmcli> help set
set [<setting>.<prop> <value>] :: set property value
This command sets property value.
Example: nmcli> set con.id My connection
```
* Added `ignore_unsupported_suboptions` option & improved `wifi(_sec)` doc
* Corrected pep8 issues
```
ERROR: Found 2 pep8 issue(s) which need to be resolved:
ERROR: plugins/modules/net_tools/nmcli.py:342:161: E501: line too long
(236 > 160 characters)
ERROR: plugins/modules/net_tools/nmcli.py:359:161: E501: line too long
(237 > 160 characters)
```
* Fixed remaining sanity check issues and added even more docs
* No need to split Note
* Update plugins/modules/net_tools/nmcli.py
3.5.0 has already been released.
Co-authored-by: Felix Fontein <felix@fontein.de>
* Followed uniformity guideline for format macros from Ansible's dev guide
* Addressed comment
https://github.com/ansible-collections/community.general/pull/3141#discussion_r689098383
* Documentation cleanup continuation
* Replace `NM_SETTING_*`s having a description with their numeric value
* Splitting up long paragraphs.
Also removed `wifi`.`seen-bssids` as it "`is only meant for reading`"
* Addressed remaining comments and clarified `wake-on-lan` note
* Update plugins/modules/net_tools/nmcli.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/net_tools/nmcli.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/net_tools/nmcli.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/net_tools/nmcli.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Finishing addressing documentation comments.
* Update plugins/modules/net_tools/nmcli.py
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
* Update plugins/modules/net_tools/nmcli.py
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
* Update nmcli.py
* Added wifi-related `list` type options to `settings_type` method
* Moved `edit_commands` `execution` logic into its own method
* Move `unsupported_property` deletion into `main` function
* Missing `.items()`
* Resolved missing proper `nmcli conn edit` arguments
* Resolve pylint issue `dangerous-default-value`
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
Co-authored-by: David Hummel <dhummel@Fingerling>
* redfish_info: Include Status property for GetChassisThermals
Include Status property for Thermal objects when querying Thermal properties
via GetChassisThermals command.
FIXES#3232
* fixup for rename of fragments file
* Update changelogs/fragments/3233-include-thermal-sensor-status-via-redfish_info.yaml
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
* Added fix for bug report in issue #3192
* Added changelog fragment
* Typo fix
* Added Importerror to exception - as req by linters
* Moved the conditional import statement to try/except block
* module_helper - implemented classmethod to start the module plus minor change
* rolled back the __changed__() method
* added changelog fragment
* Update plugins/module_utils/mh/base.py
Co-authored-by: Sviatoslav Sydorenko <wk.cvs.github@sydorenko.org.ua>
* no capt Piccards allowed in the base class
* removed extra piccards
Co-authored-by: Sviatoslav Sydorenko <wk.cvs.github@sydorenko.org.ua>
- Fix a typo in the Linode inventory plugin unit tests
- Fix some style issues in descriptions where punctuation was missing
Signed-off-by: Kellin <kellin@retromud.org>
* slack - minor refactoring and pythonifying
* added changelog fragment
* Update changelogs/fragments/3205-slack-minor-refactor.yaml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* refactor to vdo
* adjusted if condition
* added changelog fragment
* Update plugins/modules/system/vdo.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* adjustements per the PR
* more occurrences of bool compared with yes or no
* Update changelogs/fragments/3191-vdo-refactor.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Add ipv4 example to linode inventory
* Update plugins/inventory/linode.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* ini_file - prepare for fixing #273
- restructure tests
- fix error message call: fail_json() takes 1 positional argument but 2 were given
* ini_file - multiple values for one option (#273)
- add module option 'exclusive' (boolean) for the abbility to add
single option=value entries without overwriting existing options
with the same name but different values
- add abbility to define multiple options with the same name but
different values
* ini_file - add more tests for ini_file
* ini_file - fix sanity tests
* apply suggested changes:
- rename 03-regressions.yml to 03-encoding.yml
- fix typos
- fix documentation
* apply suggested changes:
- test errors also for result is failed
* apply suggested changes:
- make state=absent also work with module option exclusive
- add more tests for state=absent and module option exclusive
* fix sanity test:
- 02-values.yml:251:9: hyphens: too many spaces after hyphen
* apply proposed changes
* apply proposed changes from review
- adjust version_added to 3.6.0
- small syntax change in changelog fragment
* Initial Commit
* Comparing with tar file checksums rather than tar header checksums
* Added changelog fragment
* Revert "Comparing with tar file checksums rather than tar header checksums"
This reverts commit bed4b17107.
* Restricting idempotency tests by format
* Applying review suggestions
* zypper: support transactional-updates
- Check if transactional updates are in use by checking for the
existence of /var/lib/misc/transactional-update.state
- Prefix zypper-commands with /sbin/transactional-update --continue --drop-if-no-change --quiet run
if this is the case
fixesansible-collections/community.general#3159
* re-add get_bin_path for executables
* fix typo
* Support older version of psutil (RHEL7 and RHEL6)
The psutil python module is a true mess, they changed the API twice. The function arguments, as well as the objects that are returned.
The documentation does not make it clear which version supports what so the safest implementation is this waterfall approach.
A better approach would be to inspect the returned information, rather than trust a version, but that would not be any more efficient.
In the end it is better to have something that at least works out-of-the-box on all platforms than something that requires custom updates to system packages before it works as expected. Especially for something as basic as `pids`.
* A little bit more concise
* Apply suggestions from code review
* Add changelog fragment.
Co-authored-by: Felix Fontein <felix@fontein.de>
When a package name contains special characters (e.g. "g++"), they are
interpreted as part of the regexp.
This can lead to a crash with an error in the python re module, for
instance with "g++":
sre_constants.error: multiple repeat
Fix this by escaping the package name.
Co-authored-by: Baptiste Jonglez <git@bitsofnetworks.org>
* nmcli: use `stdin` for setting private `wifi_sec` options
I.E.:
* `802-11-wireless-security.leap-password`
* `802-11-wireless-security.psk`
* `802-11-wireless-security.wep-key0`
* `802-11-wireless-security.wep-key1`
* `802-11-wireless-security.wep-key2`
* `802-11-wireless-security.wep-key3`
* Changelog fragement formatting.
* Update changelogs/fragments/3160-pass-wifi-secrets-via-stdin-to-nmcli-module.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* Make `wifi_sec_secret_options()` into a constant
* Minor cleanup
`'set ' + key + ' ' + value`
=>
`'set %s %s' % (key, value)`
* Change `casing`
* Change `WIFI_SEC_SECRET_OPTIONS` from `list` to `tuple`
* Update `edit_connection()` to not reset `edit_commands`
It will just re`set` them if `edit_connection()` is called more than
once.
* Do not call `edit_connection()` if `connection_update(*)` fails
* Fixed `pep8` issue `E713` in tests
`test for membership should be 'not in'`
* Simplify `create_connection()`/`modify_connection()` logic
* `WIFI_SEC_SECRET_OPTIONS`=>`SECRET_OPTIONS`, options are prefixed
* Moved `if key in self.SECRET_OPTIONS` into `if value is not None` check
We don't need to do anything is the value is None
Co-authored-by: Felix Fontein <felix@fontein.de>
* Fixed `wifi_sec` option changes are not detected
Also updated `docs` URL and formatting to match that of the `wifi`
option
* Removed extraneous `appends` to `cmd` in `connection_update`
These really should have only been added to `connection_options` whose
return values get `extended` onto `cmd`
* pkgin: display stdout and stderr in case the error occurs
* Update changelogs/fragments/pkgin-output-after-error.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Updated the plugin to reflect breaking changes introduced in the underlying SDK v1.0.0 update.
* Added Changelog fragment
* Updates based on feedback/review
* Added newline to pass CI
* Added whitepace for linter
* Update changelogs/fragments/3139-tss-lookup-plugin-update-to-make-compatible-with-sdk-v1.yml
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
* For #3134
Expose BootOverrideMode parameter to redfish_command to allow setting by user during run.
* Fix trailing whitespace
* Add changelog fragment to contribution.
* Update changelogs/fragments/3135-add-redfish_command-bootoverridemode.yaml
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/remote_management/redfish/redfish_command.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/remote_management/redfish/redfish_command.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/remote_management/redfish/redfish_command.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/remote_management/redfish/redfish_command.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update changelogs/fragments/3135-add-redfish_command-bootoverridemode.yaml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* added utf-8 markers to all .py files in plugins/filter
* added utf-8 markers to all .py files in plugins/inventory
* added utf-8 markers to all .py files in plugins/lookup
* added utf-8 markers to all .py files in plugins/{action,cache,callback}
* added utf-8 markers to all .py files in plugins/connection
* added utf-8 markers to all .py files in plugins/doc_fragments
* report power state of host
* Modify sample information
* add changelog fragment
* apply feedback from github community
* apply feedback
Co-authored-by: Yvan E. Watchman <git@yvanwatchman.eu>
* multiple improvements
* added changelog fragment
* comment and name in int test files
* added notes to the documentation
* removed the extraneous changelog frag
* Update plugins/modules/web_infrastructure/apache2_module.py
* adjusted doc text for sanity check
* Update plugins/modules/web_infrastructure/apache2_module.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* removed extraneous dependency in integration test
Co-authored-by: Felix Fontein <felix@fontein.de>
* initial commit
* multiple changes:
- added a proper process_command_output()
- adjusted the output_params fields (and removed other *_params fields)
* added RETURN documentation, plus few adjustments
* fixed sanity tests
* updated BOTMETA.yml
* further adjustments
* integration tests - first commit
* removed unused files from integration test
* added role installation tests
* removed extraneous cmd line option
* added requirement-file installation tests
* adjusted documentation and output variable names
* fixed integration test
* Update plugins/modules/packaging/language/ansible_galaxy_install.py
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
* Update plugins/modules/packaging/language/ansible_galaxy_install.py
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
* Update plugins/modules/packaging/language/ansible_galaxy_install.py
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
* Update plugins/modules/packaging/language/ansible_galaxy_install.py
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
* Update plugins/modules/packaging/language/ansible_galaxy_install.py
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
* Update plugins/modules/packaging/language/ansible_galaxy_install.py
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
* Update plugins/modules/packaging/language/ansible_galaxy_install.py
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
* Update plugins/modules/packaging/language/ansible_galaxy_install.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update tests/integration/targets/ansible_galaxy_install/aliases
Co-authored-by: Felix Fontein <felix@fontein.de>
* Per comments in the PR:
- fixed missing paths case
- fixed install parsing (regexp) for ansible-galaxy collection install in v2.10
* changed the collection installed in test to something unlikely to come embedded in Ansible itself
* fixed logic for Ansible 2.9
* kill trailing whitespace
* changed default language from C.UTF-8 to en_US.UTF-8
* updated c.g version
* skipping test in python 2.6, as ansible-galaxy no longer supports it in devel
* Multiple changes:
- improved docs on ansible 2.9 and python 2.6
- removed method __changed__() - unnecessary since tracking changes in the ansible29_change var
- renamed methods __run29__() and __run210plus__() to __setup29__() and __setup210plus__(), respectively
- ansible 2.9 warning for requirements_file only when type is "both"
* sanity fix
* further adjustments
* removed extraneous doc
* changed method to determine remote ansible version
* do not allow type=both in Ansible 2.9
* Update plugins/modules/packaging/language/ansible_galaxy_install.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/packaging/language/ansible_galaxy_install.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* changed method names per PR
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
Co-authored-by: Felix Fontein <felix@fontein.de>
* minor refactoring in gunicorn module
* added changelog fragment
* reworked the gunicorn bin path part of the code, per PR
* Update changelogs/fragments/3092-gunicorn-refactor.yaml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* import certificate+key bundle from pkcs12
* fix typo/syntax
* fix variable name
* fix passwords order and improve error handling
* add changelog fragment
* enter keystore pass only once if keystore already exists, and twice at creation
* nomalize tests
- Replace `command` tasks by dedicated (community.crypto) modules.
- Add spaces around jinja2 variable names.
- Call modules by their FQCNs.
* Add tests to check keystore has a private key
fix tests for RedHat/CentOS < 8 (run openssl command as an alternative to
`openssl_pkcs12` module)
* Clone sucess should return new vm id, not id from cloned vm.
* add changelog fragment
* Update changelogs/fragments/3034-promox-kvm-return-new-id.yaml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Yvan E. Watchman <git@yvanwatchman.eu>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Deprecate get state in favour of the xfconf_info module
* added changelog fragment
* added comments in ignore files
* Update changelogs/fragments/3049-xfconf-deprecate-get.yaml
bummer, forgot that
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/system/xfconf.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/system/xfconf.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Initial commit
* Fixing units and path joins
* Ensuring paths are consistently ordered
* Adding changelog fragment
* Using os.path.join to ensure trailing slashes are present
* optimizing use of root in add_targets
* Applying initial review suggestions
* Don't know why this works but it does.
Plugin was crashing on this line on Python 3.9.2 deployed on qemu image with debian bullseye. It doesn't crash anymore.
* Create 3052_proxmox_inventory_plugin.yml
* Update changelogs/fragments/3052_proxmox_inventory_plugin.yml
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
Co-authored-by: Ajpantuso <ajpantuso@gmail.com>
* Added module for creating protected branches
* Applied some changes due to comments and added a test that currently fails
* Changing no_access to nobody due to comment on PR
* Changing the description to clarify it a bit more
* Added working tests for module 'gitlab_protected_branch'
* Fixing lint issues
* Added doc that minimum of v2.3.0 is needed to work correctly
* Fixed the requirements notation
* Check the version of the module
* Hopefully fixed the tests by skipping it when lower version of 2.3.0 is installed
* Fix lint issues
* Applying changes due to comments in PR
* Remove commented code
* Removing the trailing dot ...
Co-authored-by: jenkins-x-bot <jenkins-x@googlegroups.com>
Co-authored-by: Werner Dijkerman <iam@werner-dijkerman.nl>
* added feature flag to control whether CmdMixin adds rc, out and err to the result of the module
* added changelog fragment
* changed from a global flag to parameters in run_command
* updated changelog
* fixed brainless copy-paste of yours truly
* extend support for FreeBSD
* Check if FS exists with `fstyp` if `blkid` fails to find FS signature
(fix a potential data loss)
* Add support for FreeBSD special devices (character devices).
* Add support for FreeBSD native fstype (UFS).
* Update DOCUMENTATION accordingly.
* add/update integration tests
* Add tests for `fstype=ufs` on FreeBSD.
* Run `remove_fs` tests (`state=absent`) on FreeBSD.
* Run `overwrite_another_fs` tests on FreeBSD.
* add a changelog fragment
* fix indentation
* restrict new tests to regular files
* fix typo
* fix searching of providersize (block count)
* add '-y' option to growfs command
* remove references to versions older than the collection itself
* bump version adding new feats to 3.4.0
* reformat *collection* and *version added* for better DOCUMENTATION parsing
* skip tests for FreeBSD < 12.2
* run tests for FreeBSD >= 12.2
* re-enable tests for FreeBSD < 12.2 and give it a try with group1
* util-linux not available on FreeBSD < 12.2
* Add authentication_flow_binding_overrides option to the keycloak_client module
* Add changelog fragment
* Update changelogs/fragments/2949-add_authentication-flow-binding_keycloak-client.yml
Co-authored-by: Amin Vakil <info@aminvakil.com>
* Update plugins/modules/identity/keycloak/keycloak_client.py
Co-authored-by: Amin Vakil <info@aminvakil.com>
* Update plugins/modules/identity/keycloak/keycloak_client.py
Co-authored-by: Amin Vakil <info@aminvakil.com>
* Add unit test authentication_flow_binding_overrides feature on keycloak_client module
Co-authored-by: Amin Vakil <info@aminvakil.com>
* Remove necessities on password or token.
* Upper case letter -> Lower case letter
Co-authored-by: Amin Vakil <info@aminvakil.com>
* Documentation update.
* C -> I
Co-authored-by: Amin Vakil <info@aminvakil.com>
* fixed param order
* added changelog fragment
* rebased and uncommented tests per PR
* added /snap link in RH
* typo in tests
* Update tests/integration/targets/snap/tasks/default.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
