Ansible when there was a percentage that was calculated to be less than
1.0 would run all hosts as the value for a rolling update.
The error is due to the fact that Python will round a
float that is under 1.0 to 0, which will trigger the case of
0 hosts. The 0 host case tells ansible to run all hosts.
The fix will see if the percentage calculation after int
conversion is 0 and will else to 1 host.
This makes our recursive, ast.parse performance measures as fast as
pre-ziploader baseline.
Since this unittest isn't testing that the returned module data is
correct we don't need to worry about os.rename not having any module
data. Should devise a separate test for the module and caching code
Since 2.0 made all includes dynamic, it is now possible to create and
include a file in the course of executing a playbook. However, with the
introduction of implicit static includes this can cause problems if an
include is thought to be static but does not yet exist. For now, we're
handling missing implicit static includes as a potential dynamic include
but also adding a deprecation message to show includes like this will
need to be marked as `static: no` in the future.
Fixes#15342
Due to an apparent race condition while using pty's on a heavily loaded
system, rarely a request to create a temp directory returns an empty
string rather than the newly created path, causing an error. Disabling
forced pty's appears to resolve the issue, so this patch modifies the
mkdtemp remote call not use -tt as we're not escalating privileges and
thus no pty is required.
Fixes#13876
* Could only have one alias before. Subsequent aliases overrode the
previous ones. Now multiple aliases work.
* Fix BLACKLISTED_MODULES. Previously, modules were listed in the
generated documentation despite being blacklisted
* Deprecated modules form extras were showing the (E) tag and not the
(D) tag. Reversed that now (Probably not necessary to also show the
E tag).
* Sort the deprecated modules alphabetically in the Category docs as
well as the list of all modules
* Optimization: Previously rendered the modules to rst twice once in all
group and once in individual categories. Fixed to only render them
once.
* Add fireball to blacklist and remove async_status (as people need to
use that).
* Remove workaround for fixed bug.
The bug where PluginLoader required objects to directly inherit from
base_classes has been fixed. Remove workaround from this strategy
plugin Also switched to using super so that we don't have to modify
all of hte code anytime something like that happens.
* These should be to_uniocde because they're being sent to display()
* now you can specify a yaml invenotry file
* ansible_group_priority will now set this property on groups
* added example yaml inventory
* TODO: make group var merging depend on priority
groups, child/parent relationships should remain unchanged.
Some debuggers are easier to work with when we do everything in a single
process. This debug option caters to that at the expense of being
different from what Ansible will actually do to invoke a module.
When we document this we should be clear that this shouldn't be used for
general purpose debugging and that some modules may show strange
"errors" when used with this. Those won't be considered real bugs as
it's not how ansible really invokes the modules.
action plugins will now skip _fixup_perms for Powershell. We'll have to come up with another way to do this at some point, but it's not necessary yet since we don't support become on Windows. Also added NotImplementedError throws to chmod/chown/set_facl operations on Powershell (instead of returning '') in case anyone tries to use them in the future.
fixes#15312
* Run the module as a script from the wrapper instead of executing in the same process.
Fixes cornercases where the module could potentially be executed twice
if we import and then run the main() function without calling sys.exit()
somewhere.
Also fixes problem with concurrent.futures() hanging. Not sure
precisely how this is being triggered but it is related to invoking the
main() function outside of an if __name__ == '__main__' conditional.
* Fix for python-2.6
This reverts commit 1ffadbcc80.
Some modules seem to have path listed for things that are "commands" --
something that may be a path to a command or a bare command that should
be looked up in PATH. With this change, if they were formerly looked up
inPATH they are now being made into an absolute path in the cwd.
Reverting this until we can think more about whether to do this and
change those modules to not use path for those parameters.
* Ziploader proof of concept (jimi-c)
* Cleanups to proof of concept ziploader branch:
* python3 compatible base64 encoding
* zipfile compression (still need to enable toggling this off for
systems without zlib support in python)
* Allow non-wildcard imports (still need to make this recusrsive so that
we can have module_utils code that imports other module_utils code.)
* Better tracebacks: module filename is kept and module_utils directory
is kept so that tracebacks show the real filenames that the errors
appear in.
* Make sure we import modules that are used into the module_utils files that they are used in.
* Set ansible version in a more pythonic way for ziploader than we were doing in module replacer
* Make it possible to set the module compression as an inventory var
This may be necessary on systems where python has been compiled without
zlib compression.
* Refactoring of module_common code:
* module replacer only replaces values that make sense for that type of
file (example: don't attempt to replace python imports if we're in
a powershell module).
* Implement configurable shebang support for ziploader wrapper
* Implement client-side constants (for SELINUX_SPECIAL_FS and SYSLOG)
via environment variable.
* Remove strip_comments param as we're never going to use it (ruins line
numbering)
* Don't repeat ourselves about detecting REPLACER
* Add an easy way to debug
* Port test-module to the ziploader-aware modify_module()
* strip comments and blank lines from the wrapper so we send less over the wire.
* Comments cleanup
* Remember to output write the module line itself in powershell modules
* for line in lines strips the newlines so we have to add them back in
Before this patch, if config was ['/some/path'] then it would enter the
else block and config would be set to [].
The regression this patch fixes was introduced by 700db154.
this enhancement will cause the module to connect to the remote ios device
the first time a command wants to run instead of building a connection
immediately
this fixes a bug in nxos shared module to not immediately send a \n when
the connection is made. this commit also localizes the prompt handling
to the nxos module
The network config and template modules share a set of common functions that
have been pulled into the netcfg shared module. This is backwards compatible
with the current implemention in the modules.
now assures it is always a list of paths and not just assumes it
this avoids issues of parsing a 'string path' and picking up '/' as
a valid path for plugin loader
I was surprised to see complete file content in the (JSON) task output when
in diff-mode. Since we see the diff anyhow, there's no need to send everything
on screen.
`ansible_failed_task`:
Contains the task data, essentially a serialized view of the Task() object.
`ansible_failed_result`:
Contains the result of the task failure, which is identical in function
to registering the result. Doing so automatically like this saves the user
from having to register every result in a block and then trying to figure
out which result had the failure
Similar to the way try/except/finally work, these variables will not be
available in the `always` portion of a block unless there is a corresponding
`rescue` first.
Fixes#12341
Prompt search logic is now localized to the ios shared module instead
of using the common regexps in the shell module. This resolves a number
of problems with ios modules functioning properly
The changes to chown/chmod were broken on Mac (-R was being appended to the end of the command- OSX requires it before the file list).
A number of base action remote setup commands were also blindly proceeding without checking for success. Added error raises for unrecoverable failure cases.
Previously, split_args() was not taking print/block/comment depth into account
when splitting things, meaning that if there was a quote character inside an
un-quoted variable (ie. {{ foo | some_filter(' ') }}), it was incorrectly
splitting on the quotes instead of continuing to append to the previous param.
Fixes#13630
A few of the docs fragments have the available choices for some params
defined as "BOOLEANS". Because choices accepts a list, it treats
"BOOLEANS" as an iterable and then generates a list composed of each
letter.
Instead, define the available choices as a list of `['yes', 'no']`,
as is common in most other modules.
If we're not delegating then we change _connection into a local
connection midway through the file but we don't change
_play_context.connection (no need to alter that). When we later check
it in process_remote() we need to know the actual connection, not the
connection that we thought we were going to use at the start of run().
So we have to use _connection.transport in process_remote(). The rest
of the places could use either one (because we have not yet changed to
a local connection) but we go ahead and switch those to
_connection.transport as well to avoid confusion in the future.
Fixes https://github.com/ansible/ansible-modules-core/issues/3136
* Can be configured in the ansible.cfg for tasks/handlers individually
* If an included filename contains no vars or loops, it will be expanded
in-place as if it were marked as static
* class_only was a keyword arg of get() and all() that was mistakenly
passed on to Plugins. Be sure to strip it from the keyword args
before instantiating Plugins. (Reworked API probably should either
not instantiate Plugins or take the args for the Plugin as a separate
list and a dict.)
* Checking required base_classes was only done in get() and only if
class_only was False (ie: that Plugin was instantiated). This meant
that different plugins could be found depending on whether the call
was to .get() or to all() and whether it was for classes or instances.
Fixed so that required base_classes are always checked.
Modules shouldn't need to import boto.ec2.
The check was to test if profile_name was supported by boto.
Two years after the introduction of the support, we will now
assume that if people are passing `profile`, they are using
a version of boto that supports it (this requirement is
already documented in the aws documentation fragment)
Also remove even older version check for `validate_certs`
Fixes#1901
* Make role param resolution follow the role dependency chain, rather
than using all roles within the play
* Also move params to be merged in after role vars in general, to match
our variable precedence rules
* Changes to the way var lookup is done in role helper methods for
get_vars(), get_inherited_vars(), and get_role_params() to make the
above possible without trampling on previously merged vars
Fixes#14472Fixes#14475
On none-Linux systems `get_distribution()` returns `None`, which fails in `fetch_url`, because the return value of `get_distribution()` is not checked before calling `lower()` on the result.
This commit address a number of minor updates the nxos shared module
* connect() is now lazy loaded
* parse inner output messages when errored
* code syntax cleanup
* Make documentation examples into code blocks
* Make code to call the subsets more general.
* Made min subset always execute (cannot disable it).
* Use a passed in modules parameter rather than global modules. This is needed for ziploader
* Remove unneeded __init__()
* Remove uneeded multiple inheritance from a base class
* gather_facts is now a list type
This commit adds a new feature to allow implementations of shell to
specify the command prompt regexp to be used. It allows adds a new
kwarg at instantiation to kick the remote device with a carriage return.
By default the kickstart flag is true but can be disabled by passing
kickstart=False.
This commit address to issues in the eos shard module. The first one
is a bug fix for returning the running config when the transport is eapi.
The shared module will now return config text instead of an object. The
second is a optimization that delays when the eos module connects to the
remote devices. This provies a performance enhancement when using
ssh since the module doesn't default to connecting immediately
Just including the `ssl` key in the config for MySQLdb.connect, causes it to check for the existence of SSL support. This patch only adds the key if one of the ssl configuration options is included.
On some switches, starting an SSH connection and immediately calling
recv() will result in a connection timeout. The switch requires some
input on the channel before it provides any prompt.
As such, this patch sends an empty command immediately upon connection,
triggering the switch to send a prompt which the shell can then
interpret.
Signed-off-by: Devananda van der Veen <devananda.vdv@gmail.com>
* Unit tests exposed a problem where nested blocks did not correctly
hit rescue/always portions of parent blocks
* Cleaned up logic in PlayIterator
* Unfortunately fixing the above exposed a potential problem in the
block integration tests, where a failure in an "always" section may
always lead to a failed state and the termination of execution
beyond that point, so certain parts of the block integration test
were disabled.
This implements solution #1 in the proposal #14860.
It only shows the diff if the task induced a change, which means that if the changed_when control overrides the task, not diff will be produced.
See #14860 for a rationale and the use-case.
porting @dominis 's ansible-shell tool from 1.9 and integrating it into ansible
added verbosity control
made more resilitent to several errors
added highlight color, to configurable colors
more resilient on exception and interruptions
prompt coloring, goes red and changes to # when using become = true and root
become setting is now explicit and not a toggle
* fetch_url shouldn't both accept follow_redirects and support follow_redircts via module.params
* Default follow_redirects for open_url should be 'urllib2'
* Add redirect test for get_url
This commit adds the multiline flag to the regexp search and match test
plugin. It defaults to re.M = False for backwards compatibility. To use
the multiline feature add multiline=True to the test filter
{{ config | search('^hostname', multiline=True) }}
main_q is not used anywhere in the codebase.
It is created in TaskQueueManager._initialize_processes, bundled with rslt_q
into TaskQueueManger._workers, later unwrapped in StrategyBase but not used.
This queue is closed in TaskQueueManger._cleanup_processes.
Historically, it is passed as a init parameter into WorkerProcess,
introduced in 62d7956, but this behavior is changed in 120b9a7.
Signed-off-by: 夏恺(Xia Kai) <xiaket@gmail.com>
Update the profile task callback plugin to include a fix for duplicate named tasks. Added additional features to adjust the number of tasks output and the sort order.
For example:
$ ansible web --list-hosts | head -n1
hosts (7):
ERROR! Unexpected Exception: [Errno 32] Broken pipe
Traceback (most recent call last):
File "/home/lamby/git/private/lamby-ansible2/.venv/bin/ansible", line 114, in <module>
display.display("to see the full traceback, use -vvv")
File "/home/lamby/git/private/lamby-ansible2/.venv/local/lib/python2.7/site-packages/ansible/utils/display.py", line 133, in display
sys.stdout.flush()
IOError: [Errno 32] Broken pipe
Such a pipe target will close up shop early when its seen enough input,
causing ansible to print an ugly traceback.
Signed-off-by: Chris Lamb <chris@chris-lamb.co.uk>
This commit fixes two bugs in the openswitch shared module. The first
bug was a wrong argument type for the use_ssl argument. It was set
to int and should be bool. The second changes the default ports for http
(was 80, now 8091) and https (was 443, now 18091). This change aligns
the default port values with the OS
This commit changes the key the ops_template will search for in order
to backup the current configuration to local disk on the Ansible control
host. This change was made to make ops_template consistent with the
other network template modules.
Note that this will break if we deal with non-utf8 paths. Fixing this
way because converting everythig to byte strings instead is a very
invasive task so it should be done as a specific feature to provide
support for non-utf8 paths at some point in the future (if needed).
This is the same fix we applied to v1.9 in PR #14565, however it does not fix#14678 completely !
The dictionaries are not being merged as tey are on v1.9.
The use of realpath means when following symlinks the actual path is
used when loading these files in the VariableManager, which may not
line up with the host or group name specified.
Fixes#14545
The find_mount_point function does not resolve the mount point of paths with a soft-link correctly and returns the wrong mount-point.
I have mounted an NFS filesystem on /nfs-mount. This directory contains a directory called "directory". I also created a soft-link to this last directory: /soft-link-to-directory -> /nfs-mount/directory. I created the following task to copy a file into /soft-link-to-directory:
- name: copy file to nfs-mount
copy:
src: "file"
dest: "/soft-link-to-directory/file"
This throws an exception:
invalid selinux context: [Errno 95] Operation not supported
This is caused by the find_mount_point function to return '/' as the mount point for '/soft-link-to-directory/file'. This should have been /nfs-mount. Because the find_mount_point returns the wrong mount-point, the is_special_selinux_path function does not recognise the file is on an NFS mount and tries to set the default SELinux context (system_u:object_r:default_t:s0), which fails. The context should have been: system_u:object_r:nfs_t:s0
Full Ansible output:
TASK [copy file to nfs-mount] **************************************************
fatal: [hostname]: FAILED! => {"changed": false, "checksum": "f34b60930a5d6d689cf49a4c16bd7f9806be608c", "cur_context": ["system_u", "object_r", "nfs_t", "s0"], "failed": true, "gid": 24170, "group": "foundation", "input_was": ["system_u", "object_r", "default_t", "s0"], "mode": "0644", "msg": "invalid selinux context: [Errno 95] Operation not supported", "new_context": ["system_u", "object_r", "default_t", "s0"], "owner": "root", "path": "/soft-link-to-directory/.ansible_tmpWCT6Z4file", "secontext": "system_u:object_r:nfs_t:s0", "size": 37, "state": "file", "uid": 0}
- now workers passes queue to task_executor so it can send back events per item and on retry attempt
- updated result class to pass along events to strategy
- base strategy updated to forward new events to callback
- callbacks now remove 'items' on final result but process them directly when invoked per item
- new callback method to deal with retry attempt messages (also now obeys nolog)
- updated tests to match new signature of task_executor
fixes#14558fixes#14072
* Fixes bug where the task was not marked as failed if the number of
retries were exceeded (#14461)
* Reorganizing logic to be a bit cleaner, and so retrie messages are
shown before sleeping (which makes way more sense)
Fixes#14461Fixes#14580
Prior to 75b6f61, we strictly limited variables we re-injected. After that
patch however, we re-injected everything which causes problems under certain
circumstances. For now, we'll continue to filter out some properties of
PlayContext for re-injection.
Fixes#14352
This is related to #14559, but only the part for Ansible v2.0
This commit makes merging empty dicts, or equal dicts more efficient.
I noticed that while debugging merge_hash a lot of merges related to empty dictionaries and sometimes also identical dictionaries.
will display on certain verbosity levels, both playbook/file info
and non empty options with which it's running.
avoid errors when not using CLI classes
The setup module calls /bin/lsblk once for each device appearing in the /etc/mtab file. However, the same device appears there mutliple times when the system uses bind-mounts. As a result, /bin/lsblk is being called repeatedly to get the uuid of the same device.
On a system with many mounts, this leads to a TimeoutError in the get_mount_facts function of the setup module as described in #14551.
Fixes#14551
ansible_os_family on openSUSE Leap has the wrong value:
"ansible_os_family": "openSUSE Leap",
It should be:
"ansible_os_family": "Suse",
This change fixes that by adding the relevant key and ensuring that dict
lookups replace ' ' with '_' so the key does not contain a space.
This commit fixes a situation where connection errors would be caught
but no useful information display. The connection error is now caught
and emitted in a call to fail_json
This commit fixes a situation where connection errors would be caught
but no useful information display. The connection error is now caught
and emitted in a call to fail_json
This commit fixes a situation where connection errors would be caught
but no useful information display. The connection error is now caught
and emitted in a call to fail_json
This commit fixes a situation where connection errors would be caught
but no useful information display. The connection error is now caught
and emitted in a call to fail_json
This commit fixes a situation where connection errors would be caught
but no useful information display. The connection error is now caught
and emitted in a call to fail_json
- added new function for action plugins this avoids the very fragile checksum code that is shell dependant.
- ported copy module to it
- converted assemble to new stat function
- some corrections and ported temlpate
- updated old checksum function to use new stat one under the hood
- documented revamped remote checksum method
When working around "bad systems that insist on not allowing
updates in an atomic manner", we should not run previous exception
management code that tries to perform atomic move in case of
exception since the dirty non atomic move has already been
performed.
* Fix the way task_include fields were created and copied
* Have blocks get_dep_chain() look at task_include's blocks for proper
dep chain inheritance
* Fix the way task_include fields are copied to prevent a recursive
degradation
Fixes#14460
This adds a new action plugin iosxr_template that allows the
iosxr_template module to pass network device configurations through the
template engine. It also allows configurations to be backed up.
* Make sure dep chains are checked recursively for nested blocks
* Fixing iterator is_failed() check to make sure we're not in a
rescue block before returning True
* Use is_failed() to test whether a host should be added to the TQM
failed_hosts list
* Use is_failed() when compiling the list of hosts left to iterate
over in both the linear and free strategies
Fixes#14222
- moved to base cli class to handle centrally and duplicate less code
- now avoids duplication and reiteration of signal handler by reassigning it
- left note on how to do non-graceful in case we add in future
as I won't remember everything i did here and don't want to 'relearn' it.
- adhoc now terminates gracefully
- avoid race condition on terminations by ignoring errors if
worker might have been reaped between checking if active and termination call
- ansible-playbook now properly exits on sigint/term
- adhoc and playbook now give exceptions that we should not normally capture
and rely on top level finally to reap children
- handle systemexit breaks in workers
- added debug to see at which frame we exit
partial fix for #14346
* Raise an error if the action is using BYPASS_HOST_LOOP, to prevent
unexpected behavior from those actions
* Show a warning regarding tasks marked as run_once, as the free strategy
does not yet support that behavior
* Minor tweak to linear strategies run_once code to make sure we don't
raise an error if an action isn't found
* If the internal value is None, do not add the variable
* Make sure all aliases for a given variable name are set (if they're
not already set in the dictionary)
Fixes#14310
just 'cause people build bad systems that insist on not allowing
updates in an atomic manner and force us to do them in a very
unsafe way that has race conditions and can lead to many issues.
if using this option you should really be opening a bug report with
the system that only allows for this type of update.
and now i shower though i doubt i'll feel clean
* Fixed a bug in PlayIterator when ITERATING_ALWAYS, where the block
was advanced but the incorrect data structure elements were cleared
* Cleaned up the logic of is_failed() in PlayIterator
* Fixed a bug in the free strategy which had not been updated to use
the base strategy _execute_meta() method
* Stopped strategies from using is_failed() to determine if tasks should
still be fetched for a host
Fixes#14040
The net_config local action handles templating for network configuration
file. It will also allow network device configurations to be backed up
to the control host
Note: this plugin was originally named net_config but has been refactored to
net_template
