* Add Puppet skip_tags option
* Include changelog fragment
* Apply suggestions from code review
Co-authored-by: Felix Fontein <felix@fontein.de>
---------
Co-authored-by: Felix Fontein <felix@fontein.de>
* archive: Generate crc32 over 16MiB chunks
Running crc32 over the whole content of the compressed file potentially
requires a lot of RAM. The crc32 function in zlib allows for calculating
the checksum in chunks. This changes the code to calculate the checksum
over 16 MiB chunks instead. 16 MiB is the value also used by
shutil.copyfileobj().
* Update changelogs/fragments/6199-archive-generate-checksum-in-chunks.yml
Change the type of change to bugfix
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update changelogs/fragments/6199-archive-generate-checksum-in-chunks.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
---------
Co-authored-by: Felix Fontein <felix@fontein.de>
Factorize the current logic to determine whether use 'environments' as
D-Bus registration option (rather than 'environment') in an own
function, so it is easier to read it and maintain it.
With the small helper function in place, extend the logic to support
CentOS: it is in practice the same as the RHEL one, with an additional
check to support CentOS Stream 8 (which is a rolling release, and not
versioned).
When registering using D-Bus and using a version of subscription-manager
with an unimplemented 'force' option, then unregister manually the
system only if it is registered. 'subscription-manager unregister'
errors out when trying to unregister an already unregistered system.
* pipx: Document parameters supported with state=latest
* pipx: Support "include_injected" with states "upgrade" and "latest"
- Contrary to documentation, "include_injected" doesn't appear to have
worked with state=upgrade since it was introduced.
- Add support for include_injected with "latest", since "latest" is
specified as being install+upgrade.
* Add changelog fragment
* Update plugins/modules/pipx.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update changelog fragment
Co-authored-by: Felix Fontein <felix@fontein.de>
* pipx: Update to correct target release of community.general
---------
Co-authored-by: Felix Fontein <felix@fontein.de>
* Added call method to select proper response from xo server
* Added changelog fragment
* Removed excess blank lines
* Moved period in changelog fragment
* Made suggested changes
* Remove f-strings for Python 2.7 compatibility
Co-authored-by: Felix Fontein <felix@fontein.de>
---------
Co-authored-by: Linus Kirkwood <lkirkwood@allette.com.au>
Co-authored-by: Felix Fontein <felix@fontein.de>
* nmcli: fixed idempotency issue with 'may_fail4' when 'method' is 'disabled'
* added note to documentation
* updated changelog fragment
* Update changelog fragment.
---------
Co-authored-by: Felix Fontein <felix@fontein.de>
* add runner_fast_rate option
* unset default value for runner_fast_rate parameter
* add some commas
* Remove default in copy of argspec.
Co-authored-by: Sam Potekhin <eax24@ya.ru>
---------
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Sam Potekhin <eax24@ya.ru>
* pipx: Allow injected modules to add apps
Add support for pipx inject's "--include-apps" parameter.
* add changelog fragment
* fix pipx test ("install_apps", not "include_apps")
* fix pipx test -- add a second invocation for install_apps
* Update changelogs/fragments/6198-pipx-inject-install-apps.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/pipx.py
Co-authored-by: Felix Fontein <felix@fontein.de>
---------
Co-authored-by: Felix Fontein <felix@fontein.de>
* feat(ssh_config): proxyjump option
* feat(ssh_config: add proxyjump test
* CamelCase ProxyJump
* add changelog fragment
* Update plugins/modules/ssh_config.py
add version_added
Co-authored-by: Felix Fontein <felix@fontein.de>
* update task name to include new proxyjump option
* adding tests for proxyjump option
* fixing assert variable name
---------
Co-authored-by: Felix Fontein <felix@fontein.de>
We simply add a param to allow proxmox administrator to restore VM from
an archives. This new option will be useful to automate automatic
creation and restore of VM.
Co-authored-by: Julian Vanden Broeck <julian.vandenbroeck@dalibo.com>
* clean performs apt-get clean.
* dist_upgrade performs apt-get dist-upgrade.
* update_kernel performs update-kernel to upgrade kernel packages.
* update_cache, clean, dist_upgrade and update_kernel can be used with and without specified packages.
The module currently has a static 'required_if' statement for its
parameters that forces any of 'username' or 'activationkey' or 'token'
in case state=present; while this is generally a good idea, it can be
an extra requirements in some cases. In particular, if the system is
already registered, there is no need for credentials -- some of the
operations of the module, such as manipulating pools, can be done
perfectly without credentials.
Hence:
- change the static 'required_if' to require credentials only when
forcing the registration
- check for credentials manually when a registration is needed, i.e.
on an unregistered system; the fail message is the same as the one
shown by 'required_if'
Adapt the tests to this new situation:
- test_without_required_parameters now needs to mock an unregistered
system
- add a new version of test_without_required_parameters to test an
already registered system
- add a simple test case for only state=present usable on an already
registered system
- remove the credentials from a test case for pool attachment that
mocks an already registered system
subscription-manager on RHEL installs a symlink in /usr/bin to
console-helper (part of usermode), which triggers an interactive prompt
for root credentials when run as user. It seems that console-helper
does not handle well non-interactive contexts (e.g. without a TTY for
input), and thus it will hang waiting for input when run as user in an
Ansible task.
Since subscription-manager requires root already anyway (and it will
fail when explicitly run as user), then apply the same logic locally on
all the modules that interact with it: redhat_subscription,
rhsm_release, and rhsm_repository.
* Replace deprecated error with BadZipFile
* Use imported BadZipFile
Co-authored-by: Felix Fontein <felix@fontein.de>
* Add news fragment
* Update new fragment
Co-authored-by: Felix Fontein <felix@fontein.de>
---------
Co-authored-by: Felix Fontein <felix@fontein.de>
* Fix influxdb_user grants in check mode
When running in check mode, `influxdb_user` will return error when the user doesn't exist yet, instead of reporting `changed` state.
* Update changelogs/fragments/6111-influxdb_user-check-mode.yaml
Co-authored-by: Felix Fontein <felix@fontein.de>
---------
Co-authored-by: Felix Fontein <felix@fontein.de>
* Adding support for `-p` option to specify port(s) to scan
* Adding changelog fragment file
* Corrected appending options
* Edit to doc section
* Correction in documentation type
* Fixed `:` use in doc breaking yaml
* Update changelogs/fragments/6165-nmap-port.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/inventory/nmap.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/inventory/nmap.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Adding usage example
* Adding comment to example that was missed
* Breaking line up, was too long for sanity test 160 char limit
* Still too long since spaces are counted
* Changed type to string to work for a single entry as well as comma separated values
* Update changelogs/fragments/6165-nmap-port.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/inventory/nmap.py
Co-authored-by: Felix Fontein <felix@fontein.de>
---------
Co-authored-by: Felix Fontein <felix@fontein.de>
* openbsd_pkg: set TERM to 'dumb' in execute_command
Keeps pkg_add happy when someone running ansible is using a TERM that
the managed OpenBSD host does not know about.
Fixes#5738.
Selection of specific TERM from discussion at
https://marc.info/?l=openbsd-tech&m=167290482630534&w=2
* Add changelog fragment for openbsd_pkg TERM fix
* Update changelogs/fragments/6149-openbsd_pkg-term.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
---------
Co-authored-by: Felix Fontein <felix@fontein.de>
* Updating yarn.list to not fail when when warnings are emitted
* Adding changelog fragment
* Adding _process_yarn_error function
* - Adding back changes to the changelog fragment
- Fixing formatting
* Fix trailing whitespace
* Update plugins/modules/yarn.py
Co-authored-by: Felix Fontein <felix@fontein.de>
---------
Co-authored-by: Felix Fontein <felix@fontein.de>
subscription-manager currently does not have a way to get credentials
(username, password, activation keys, organization ID) in a secure way:
the existing command line parameters can be easily spotted when running
a process listing while 'subscription-manager register' runs.
There is a D-Bus service, which is used by e.g. cockpit and Anaconda to
interface with RHSM (at least for registration and common queries).
Try to perform the registration using D-Bus, in a way very similar to
the work done in convert2rhel [1] (with my help):
- try to do a simple signal test to check whether the system bus works;
inspired by the login in the dconf module
- pass most of the options as registration options; for the few that are
not part of the registration, execute 'subscription-manager' manually
- add quirks for differently working (or not) registration options for
the D-Bus Register*() methods depending on the version of RHEL
- 'subscription-manager register' is used only in case the signal test
is not working; silent fallback in case of D-Bus errors during the
registration is not done on purpose to avoid silent fallback to a less
secure registration
[1] https://github.com/oamg/convert2rhel/pull/540/
It may happen operator wants to get the built command instead of all the
parameters. This change injects a new entry in the dict output, showing
what command way actually launched.
This patch also takes the opportunity to add missing dots to some
documentation lines.
dconf: parse GVariant values to check for equality whenever possible
Direct string comparisons are an inaccurate way to compare two
GVariant representations. For example, 'foo' and "foo" (including the
quote marks, which are part of the representation) are equal GVariants
but if you just do a string compare (remember, including the quotes)
they'll be interpreted.
We therefore want to use the `gi.repository` Python library to parse
GVariant representations before comparing them whenever possible.
However, we don't want to assume that this library will always be
available or require it for Ansible to function, so we use a straight
string comparison as a fallback when the library isn't available. This
may result in some false positives, i.e., Ansible thinking a value is
changing when it actually isn't, but will not result in incorrect
values being written into `dconf`.
Co-authored-by: Jonathan Kamens <jik@jik5.kamens.us>
The fix ensures that no 'KeyError' is raised, when 'access_level' is not provided as module parameter or when 'access_level_on_creation' is false.
Signed-off-by: Christoph Fiehe <c.fiehe@eurodata.de>
Co-authored-by: Christoph Fiehe <c.fiehe@eurodata.de>
This fixes the following warning on FreeBSD:
[WARNING]: The "jail" connection plugin has an improperly configured
remote target value, forcing "inventory_hostname" templated value
instead of the string
* add persistent option for modprobe
* add suggested changes + fix broken test
* change modprobe module path in tests due to rebase
* change persistent option type from bool to str with choices
* fix unused import
* add example with persistent option
* fix some minor issues after review
- move regexps compiling to __init__
- move AnsibleModule to build_module function and use this function in tests instead of AnsibleModule
- fix terminlogy issue in documentation
* fix unused-import
* Add new project features to API
* add changelog fragment
* remove extra line from changelog
* Update changelog formatting
Co-authored-by: Felix Fontein <felix@fontein.de>
---------
Co-authored-by: Felix Fontein <felix@fontein.de>
* sefcontext: add path substitution support (#1193)
First commit for feedback, missing docs and tests.
* sefcontext: add documentation
* Add changelog fragment
* Documentation formatting
* Delete extra newline
* pep8 fixes
Fix indentation
* Add version_added to arg docs
* Add examples
* Don't delete non-matching path substitutions
* Add integration tests
* Delete only substitutions if such arg passed
Don't delete existing regular file context mappings if deletion of
a path substitution was requested with the presence of the
`equal` arg - delete only path substitutions in such case.
Path substitutions and regular mappings may overlap.
* Can only add args in minor releases
:(
* Cleanup before tests
* Fix deletion using substitution
Was comparing wrong var.
* Fix test checking wrong var
* Improve args documentation and examples
List the default values for selevel, seuser.
Add example for deleting path substitutions only.
* Add attributes documentation block
Not sure if should add become/delegate/async,
shouldn't those work just like that without any
specific code added for them?
* and fix indentation on attribute block
* Consistent indentation for attributes
Confusing, most plugins indent with 4 spaces.
But some use 2 like the rest of the code, so use 2.
* Add missing ref for attribute block
* Use correct c.g version in doc block
Co-authored-by: Felix Fontein <felix@fontein.de>
* Add full stop to changelog fragment
Co-authored-by: Felix Fontein <felix@fontein.de>
* Streamline documentation
Co-authored-by: Alexei Znamensky <103110+russoz@users.noreply.github.com>
* Support limiting deletion to setype
Deleting file context mappings may be limited by
passing setype or equal, if neither arg is passed
then delete either setype/equal mappings that match.
* Change arg name, diff mode output fix
Change arg name from equal to substitute.
Print target = subsitute in diff mode same way as
semanage does.
Also put back platform attribute, try to improve
clumsy language in the substitute arg docs.
* Delete even if arg setype not match existing
Test 5 indicates that deletion is supposed to not check that
the arg setype passed when deleting matches the setype
of the mapping to delete.
Delete any mapping that matches target, regardless of
setype arg value.
* Update arg name in tests
* Too eager replacing
Accidentally replaced seobject function names so fix them back
* 4564: Fix invalid setype in doc example
Change from httpd_git_rw_content_t which
does not exist to httpd_sys_rw_content_t
Fixes#4564
* Fix documentation attributes
Additional fragment
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update version_added in docs
Bumping minor to 6.4.0 since it didn't make 6.3.0.
* Add more description to the new arg docs
Try to improve discoverability of the new feature and make it easier to understand without deep SELinux understanding.
* Update platform to Linux in documentation
* Add equal as alias for the new argument
Improve discoverability of the new feature by adding an alias to the new module argument. The argument name "equal" will be easy to find for users who are not familiar with SELinux and who just try to match to the CLI tool `semanage`.
* And add alias argument properly
Previous commit missed actually adding the alias (added to docs only).
---------
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Alexei Znamensky <103110+russoz@users.noreply.github.com>
* cloudflare_dns: Fix setting SRV records with a root level entry
* cloudflare_dns: Remove the part which deletes the zone from the SRV record name
The cloudflare API accepts the record name + zone name to be sent. Removing that, will guarantee the module to be idempotent even though that line was added ~7 years ago for that specific reason: 7477fe5141
It seems the most logical explanition is that Cloudflare changed their API response somewhere over the last 7 years.
* cloudflare_dns: Update the changelog fragment
* stop passing loader/dataloader since it has been deprecated by ansible
Signed-off-by: Martin Schurz <Martin.Schurz@t-systems.com>
* add changelog fragment
Signed-off-by: Martin Schurz <Martin.Schurz@t-systems.com>
* explicitly pass None to keep compatibility to older Ansible versions
Signed-off-by: Martin Schurz <Martin.Schurz@t-systems.com>
* use try/except to keep things compatible
Signed-off-by: Martin Schurz <Martin.Schurz@t-systems.com>
* Update plugins/lookup/cartesian.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/lookup/flattened.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/lookup/flattened.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/lookup/cartesian.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update changelogs/fragments/6074-loader_in_listify.yml.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
---------
Signed-off-by: Martin Schurz <Martin.Schurz@t-systems.com>
Co-authored-by: Felix Fontein <felix@fontein.de>
