* Add module redfish_config
Communicates with Out-Of-Band Controller through Redfish APIs
Sends a configuration update to the Controller
* Wrapped all instances of result['msg'] inside to_native()
* Added more entries to Description section
* Minor fixes for PEP8 compliance
* Update the root URI to match the DMTF specification
* Display valid Categories or Commands in case invalid value given
* Updated returned values and description
* Add default values to bios and mgr variables
* Fix iosxr cli_config module diff issue
* Modify iosxr plugin to support configuration
diff capability (get_diff()) within Ansible
to be in sync with iosxr_config module.
* Fix unit test case failure
* initial source of the elb_target_facts module, which gathers all
registered ELBv2 target groups for a given instance id
* updating
* initial dump of tests
* updating docs, adding AWSRetry decorators
* updating tests
* More brush up, some refactoring
* updating for sanity tests
* removing extra space
* updating elb_target_facts to use a new name for the return value, not return a fact, and use instance variables for the AWS connections. updating tests to go along with that
* updating classes to be 'new-style' classes
* Fix 'macro name' timeout
Added function to send macro to device using 'sendonly'.
* Filter 'macro' from normal commands
* Removed white space
* Undefined variable 'cmd'
* Fixed netapp_e_lun_mapping options for backwards compatibility.
Readd lun and target_type as deprecated options.
Note: lun and target_type were removed in patch #44666 since they were
no longer needed for the logic in the module. However, this cause will
cause existing playbooks utilizing these options to break.
* Add lun specification and target_type verification for netapp_e_lun_mapping
* Fix typos in docker_login reauthorize parameter
* Remove note about docker_login email address
Docker Hub no longer requires an email address.
* Remove check for email parameter with Docker Hub
This is no longer required, so login should not fail if it's not provided.
- Add support for installing specific variants of a port.
- Add support for using yaml lists with 'name' parameter, rather than comma-separated lists.
- Add to and clarify documentation and examples.
- Use Macports nomenclature:
- s/package/port/g
- Rename update_cache to sync_ports but keep update_cache as an alias. Remove undocumented update-cache alias.
- Remove undocumented 'pkg' alias for 'name'. Replace with 'port' alias and document it.
- Print stdout and stderr output if `port sync` fails.
- Print stderr output, rather than stdout, if `port install/uninstall/activate/deactivate` fail.
* Only handle cpu_shares, volume_driver, auto_remove as in _host_config().
* Don't compare log_options (resp restart_retries) if log_driver (resp restart_policy) is not specified.
* Warn that log_options (resp restart_retries) is ignored if log_driver (resp restart_policy) is not specified.
If values="somestring" is specified then this module normalizes it to
["somestring"]. This means that passing name="foo", values="",
state=exact results in the ldap entry having a single attribute called
foo="".
To delete all attributes "foo", regardless of their values, it is
necessary to pass name="foo", values=[], state="exact".
This patch adds a new `backend_config` parameter that allows to provide the
-backend-config parameter during the terraform init command.
The option allows to dynamically set the backend information, like the s3 bucket name
and statefile name.
* Clarify docs re mode's octal representation
I changed the language about how to use mode to make it more obvious
that using "01777" is not a typo, because the leading zero is not meant
to reflect the way that number might have been given on a command line.
See also: issues #5409#9196#11385#13115#18952#23491#23521
* Refactoring code to adhere to persistence connection.
* Update cnos_rollback.py
* Review comment of Qalthos incorporated
* Updating license for the refactored method
* Update cnos_rollback.py
* Removing the BSD License as suggested by Legal
* scaleway inventory: remove useless duplicate
* scaleway inventory: allows to connect using private ip
ansible_host was hardcoded and it was not possible to connect using
private addresses.
This allows to define multiple host variables, values are templates
which can use hosts details send by API. For example this config file
use private address and defines two variables:
plugin: scaleway
hostnames:
- hostname
variables:
ansible_host: private_ip
state: state
image: image.name
regions:
- ams1
inventory will looks like:
{
"_meta": {
"hostvars": {
"testhost": {
"ansible_host": "10.1.1.1",
"arch": "x86_64",
"commercial_type": "START1-M",
"hostname": "testhost",
"id": "af669464-0c74-4c89-8573-9fe763028448",
"image": "CentOS 7.4",
"organization": "2cc9a115-380d-4ac0-ba4b-8947eee71325",
"public_ipv4": "163.172.1.1",
"public_ipv6": "2001:bc8::1",
"state": "running",
"tags": [
"testtag"
]
}
}
},
[...]
}
* Add common and Swagger client utils for FTD modules
* Update FTD HTTP API plugin and add unit tests for it
* Add configuration layer handling object idempotency
* Add ftd_configuration module with unit tests
* Add ftd_file_download and ftd_file_upload modules with unit tests
* Validate operation data and parameters
* Fix ansible-doc, boilerplate and import errors
* Fix pip8 sanity errors
* Update object comparison to work recursively
* Add copyright
`items` is a *terrible* return key for ansible as Jinja
will often think it refers to the `items()` function.
Even though you can typically work around this with
`results['items']`, sometimes even that doesn't work:
```
- name: Resources should exist
assert:
that: item.status.phase == 'Active'
loop: "{{ k8s_namespaces['items'] }}"
```
```
fatal: [testhost]: FAILED! => {"msg": "Invalid data passed to 'loop', it
requires a list, got this instead: <built-in method items of dict object
at 0x109dc9c58>. Hint: If you passed a list/dict of just one element,
try adding wantlist=True to your lookup invocation or use q/query
instead of lookup."}
```
Change it now while we still can.
* add win_wait_for_process
* try working on additional filter options and fix derps
* improve process name matching: support arrays. support pre and post wait
* use CIM instead of WIM. requre exact contain process binary extension
* updates to metadata
* fix errors in waiting for process to start
* validate process min count for absent state. fix typo
* fix bug if only one processes is detected
* address GitHub comments
* Add new session parameter to win_psexec
* Indicate which version the session option was added in
* Added changelog fragment and minor edit on doc entry
- Fix comma separated list handling for package names
- Fix error message for unavailable/unknown package install attempt
- Fix pkg install result output generation
Signed-off-by: Adam Miller <admiller@redhat.com>
* Define netapp_e_mgmt_interface storage module.
The netapp_e_mgmt_interface module provides management configuration for
e-series storage array interface points including remote ssh access, NTP
and DNS services.
This patch also includes integration and unit tests.
* Fix netapp_e_mgmt_interface ssh option documentation and name/channel exclusivity.
Email alerts can be enabled for an E-Series system to provide
information to interested users by email when a warning or critical
level event occurs on the system. This module will allow a system owner
to configure whether or not system alerts are enabled, and who will
receive them.
* New module for NTAP E-Series iSCSI Interfaces
Define a new module for configuring NetApp E-Series iSCSI interfaces.
* Improve netapp_e_iscsi_interface integration tests
Restructured integration test to set all iscsi ports to disabled, then
defines the ports either statically or with dhcp, next updates the ports
with the other definition type (static <-> dhcp), and lastly disables
all ports. Each netapp_eseries_iscsi_interface call is verified with the
array.
* Define NetApp E-Series ASUP module
ASUP, or Auto-Support, is a mechanism that allows NetApp support
to receive information on the status of E-Series storage-systems
in order to proactively resolve issues for customers. This module
gives customers the ability to tune ASUP settings to their liking,
including disabling the feature entirely.
* Improved testing for netapp_e_asup module
Added coverage and validation to asup integration and unit testing
* Working through tests and fixing dumb mistakes
* Fix sanity issues and tests. All G
* Correct type test for azure_rm_networkinterface
* azure_rm_networkinterface correct type comparison
* Post rebase cleanup
* Remove erroneous reference to dns_servers
There are multiple settings that are defined at a global level for
E-Series systems, but don't necessarily fit with anything else. This
module is intended to provide a place to encapsulate those.
* Create copy of HostConfig object before adding it to results.
* Create general sanitize function in docker_common. Using it for all return values of docker_container.
* Make Python 2.6 compatible.
* Check if service is already masked
Newer versions of Systemd now report a 'LoadError' when the unit file
is masked. This causes the play to fail with an error stating that the
service is already masked.
Now the systemd module checks if the service is masked and doesn't
fail if it's masked and LoadError is reported.
Fixes issue #42384.
* Remove useless parens
* YUM4/DNF compatibility via yum action plugin
DNF does not natively support allow_downgrade as an option, instead
that is always the default (not configurable by the administrator)
so it had to be implemented
- Fixed group actions in check mode to report correct changed state
- Better error handling for depsolve and transaction errors in DNF
- Fixed group action idempotent transactions
- Add use_backend to yum module/action plugin
- Fix dnf handling of autoremove (didn't used to work nor had a
default value specified, now does work and matches default
behavior of yum)
- Enable installroot tests for yum4(dnf) integration testing, dnf
backend now supports that
- Switch from zip to bc for certain package install/remove test
cases in yum integration tests. The dnf depsolver downgrades
python when you uninstall zip which alters the test environment
and we have no control over that.
- Add changelog fragment
- Return a pkg_mgr fact if it was not previously set.
* Share the implementation of hashing for both vars_prompt and password_hash.
* vars_prompt with encrypt does not require passlib for the algorithms
supported by crypt.
* Additional checks ensure that there is always a result.
This works around issues in the crypt.crypt python function that returns
None for algorithms it does not know.
Some modules (like user module) interprets None as no password at all,
which is misleading.
* The password_hash filter supports all parameters of passlib.
This allows users to provide a rounds parameter, fixing #15326.
* password_hash is not restricted to the subset provided by crypt.crypt,
fixing one half of #17266.
* Updated documentation fixes other half of #17266.
* password_hash does not hard-code the salt-length, which fixes bcrypt
in connection with passlib.
bcrypt requires a salt with length 22, which fixes#25347
* Salts are only generated by ansible when using crypt.crypt.
Otherwise passlib generates them.
* Avoids deprecated functionality of passlib with newer library versions.
* When no rounds are specified for sha256/sha256_crypt and sha512/sha512_crypt
always uses the default values used by crypt, i.e. 5000 rounds.
Before when installed passlibs' defaults were used.
passlib changes its defaults with newer library versions, leading to non
idempotent behavior.
NOTE: This will lead to the recalculation of existing hashes generated
with passlib and without a rounds parameter.
Yet henceforth the hashes will remain the same.
No matter the installed passlib version.
Making these hashes idempotent.
Fixes#15326Fixes#17266Fixes#25347 except bcrypt still uses 2a, instead of the suggested 2b.
* random_salt is solely handled by encrypt.py.
There is no _random_salt function there anymore.
Also the test moved to test_encrypt.py.
* Uses pytest.skip when passlib is not available, instead of a silent return.
* More checks are executed when passlib is not available.
* Moves tests that require passlib into their own test-function.
* Uses the six library to reraise the exception.
* Fixes integration test.
When no rounds are provided the defaults of crypt are used.
In that case the rounds are not part of the resulting MCF output.
* including test case using environment variables as per issue #44163
* including missing environment variable in shared documentation fragement, related to issue #44163
* fixes parameters via environment variables, issue #44163
The AWS API and console docs are inconsistent about whether EC2 instances have IAM profiles or roles. Things which follow the API tend to use profile but the console uses “IAM Role”. This adds that term to the help text so it's searchable.
+label: docsite_pr
* Switch to LiteralPath instead of Path. Closes#44508
* add changelog fragment
* fix line endings and remove final empty line
* Minor text changes in changelog
