Also does some reorganization/cleanup on the magic vars/delegated
variable generation portions of VariableManager to make the above
possible.
Fixes#12633
better error reporting on fetching errors
use scm if it exists over src
unified functions in requirements
simplified logic
added verbose to tests
cleanup code refs, unused options and dead code
moved get_opt to base class
fixes#11920fixes#12612fixes#10454
This is because we pass the whole dd command string into the shell
that's running on the contained environment rather than running it
directly from python via subprocess without a shell.
corrected output from default callback
added new tests for no_log loops
updated makefile test to check for both positive and negative occurrences of no_log
The earlier code behaved exactly as though this default had been set,
but it was actually handled as a(n unnecessary) special case inside the
connection plugin, rather than set as an explicit default.
If the default is overriden either in ansible.cfg or the environment,
the new code will continue to work (in fact, it won't know or care,
since it just uses the value set in the PlayContext).
This is submitted as a separate commit for easier review to address
backwards-compatibility concerns.
Using set_host_overrides() in the connection plugin to access the ssh
argument variables from the inventory didn't see group_vars/host_vars
settings, as noted earlier. Instead, we can set the correct values in
the PlayContext, which has access to all command-line options, task
settings, and variables.
The only downside of doing so is that the source of the settings is no
longer available in ssh.py, and therefore can't be logged. But the code
is simpler, and it actually works.
This change was suggested by @jimi-c in response to the FIXME in the
earlier commit.
Now we have the following ways to set additional arguments:
1. [ssh_connection]ssh_args in ansible.cfg: global setting, prepended to
every command line for ssh/scp/sftp. Overrides default ControlPersist
settings.
2. ansible_ssh_common_args inventory variable. Appended to every command
line for ssh/scp/sftp. Used in addition to ssh_args, if set above, or
the default settings.
3. ansible_{sftp,scp,ssh}_extra_args inventory variables. Appended to
every command line for the relevant binary only. Used in addition to
#1 and #2, if set above, or the default settings.
3. Using the --ssh-common-args or --{sftp,scp,ssh}-extra-args command
line options (which are overriden by #2 and #3 above).
This preserves backwards compatibility (for ssh_args in ansible.cfg),
but also permits global settings (e.g. ProxyCommand via _common_args) or
ssh-specific options (e.g. -R via ssh_extra_args).
Fixes#12576
<crab> jimi|ansible: do you think it should be possible to add both
foo:22 and foo:23 to the inventory?
<jimi|ansible> no
…so we don't want an invitation to FIXME.
CLI already provides a pager() method that feeds $PAGER on stdin, so we
just feed that the plaintext from the vault file. We can also eliminate
the redundant and now-unused shell_pager_command method in VaultEditor.
(Reminder: cannot use six here, module_utils get shipped to remote
machines that may not have six installed -- besides six doens't support
Python 2.4.)
Since c8f2483d, ini.py expects to always be passed in a pre-created list
of groups, and can no longer deal sensibly with an empty list; this just
makes that expectation clear.
This fixes a corner case where ini files live in a subdir
of the main inventory directory.
Reproducing the original error:
mkdir -p inventory/ini
cat > inventory/ini/hosts << EOF
[www]
www1
EOF
$ ansible -i inventory/ all -m ping
ERROR! 'all'
(or without the [www] group, it would complain about 'ungrouped')
Fixes another failing test.
(I don't want to do a global search/replace for 'basestring' because I
want to have unit tests covering each occurrence. When I run out of
existing failing tests, I'll try to write new ones.)
* Remove extraneous imports
* Fix some error handling
* Enable pipelining
* Disable su since it doesn't work
* Add error message when installed docker is not recent enough to
support this plugin
* Move nested functions to class level
* Make transport a class attribute
* Make exec_command, put_file and fetch_file more robust
Removed deletion of salt param from lookup file by 'password' lookup_filter.
Old behaviour leads to constant changed status when two tasks uses same lookup,
one with 'encrypt' parameter, and other without.
For example:
tasks:
- name: Create user
user:
password: "{{ lookup('password', inventory_dir + '/creds/user/pass' ncrypt=sha512_crypt) }}"
...
# Lookup file 'creds/user/pass' now contain password with salt
- name: Create htpasswd
htpasswd:
password: "{{ lookup('password', inventory_dir + '/creds/user/pass') }}"
...
# Salt gets deleted from lookup file 'creds/user/pass'
# Next run of "Create user" task will create it again and will have 'changed' status
* Disable su as it's not currently working 100% (and was disabled in v1).
* Move BUFSIZE out of the class to match other conenction plugins
* _connect shouldn't return self.
This is also peripheral to what _build_command needs, can be improved
and tested independently, and so makes more sense in a separate method.
This commit doesn't change any functionality (and I've verified that it
works with the various combinations: control_path set in ansible.cfg,
ssh_args adding or not adding ControlMaster/ControlPersist, etc.).
SSH pipelining can be a significant performance improvement, but it will
not work if sudoers is configured to requiretty. With this change, one
could have pipelining enabled in ansible.cfg, but use sudo to turn off
requiretty in a separate play (or task) where pipelining is disabled:
- hosts: foo
vars:
ansible_pipelining: no
tasks:
- lineinfile: dest=/etc/sudoers line='Defaults requiretty' state=absent
sudo_user: root
(Note that sudoers has a complicated syntax, so the above lineinfile
invocation may be too simplistic for production use; but the point is
that a separate play can do something to disable requiretty.)
Also get pipelining working for people who look to chroot as an example
for their own connection plugins
Note: In the latest v2 API, action handles become but chroot doesn't
reliably handle become. Maybe we need to add a has_become attribute
that the action can display an appropriate error.
* allow global no_log setting, no need to set at play or task level, but can be overriden by them
* allow turning off syslog only on task execution from target host (manage_syslog), overlaps with no_log functionality
* created log function for task modules to use, now we can remove all syslog references, will use systemd journal if present
* added debug flag to modules, so they can make it call new log function conditionally
* added debug logging in module's run_command
Due to the way we're now calculating delegate_to, if that value is based
on a loop variable ('item') we need to calculate all of the possible
delegated_to variables for that loop.
Fixes#12499
There doesn't appear to be anything that actually uses tmp_path in the
connection plugins so we don't need to pass that in to exec_command.
That change also means that we don't need to pass tmp_path around in
many places in the action plugins any more. there may be more cleanup
that can be done there as well (the action plugin's public run() method
takes tmp as a keyword arg but that may not be necessary).
As a sideeffect of this patch, some potential problems with chmod and
the patch, assemble, copy, and template modules has been fixed (those
modules called _remote_chmod() with the wrong order for their
parameters. Removing the tmp parameter fixed them.)
The process is already gone, so there's not going to be any new data
showing up on its stderr; we only want to make sure that we haven't
missed something that was already written. So polling once is enough.
This change is motivated by an ssh oddity: when ControlPersist is
enabled, the first (i.e. master) connection goes into the background; we
see EOF on its stdout and the process exits, but we never see EOF on its
stderr. So if we ran a command like this:
ANSIBLE_SSH_PIPELINING=1 ansible -T 30 -vvv somehost -u someuser -m command -a whoami
We would first do select([stdout,stderr], timeout) and read the command
module output, then select([stdout,stderr], timeout) again and read EOF
on stdout, then select([stderr], timeout) AGAIN (though the process has
exited), and select() would wait for the full timeout before returning
rfd=[], and then we would exit. The use of a very short timeout in the
code masked the underlying problem (that we don't see EOF on stderr).
It's always preferable to call select() with a long timeout so that the
process doesn't use any CPU until one of the events it's interested in
happens (and then select will return independent of elapsed time).
(A long timeout value means "if nothing happens, sleep for up to <x>";
omitting the timeout value means "if nothing happens, sleep forever";
specifying a zero timeout means "don't sleep at all", i.e. poll for
events and return immediately.)
This commit uses a long timeout, but explicitly detects the condition
where we've seen EOF on stdout and the process has exited, but we have
not seen EOF on stderr. If and only if that happens, it reruns select()
with a short timeout (in practice it could just exit at that point, but
I chose to be extra cautious). As a result, we end up calling select()
far less often, and use less CPU while waiting, but don't sleep for a
long time waiting for something that will never happen.
Note that we don't omit the timeout to select() altogether because if
we're waiting for an escalation prompt, we DO want to give up with an
error after some time. We also don't set exceptfds, because we're not
actually acting on any notifications of exceptional conditions.
On Python 2, shlex.split() raises if you pass it a unicode object with
non-ASCII characters in it. The Ansible codebase copes by explicitly
converting the string using to_bytes() before passing it to
shlex.split().
On Python 3, shlex.split() raises ('bytes' object has no attribute 'read')
if you pass a bytes object. Oops.
This commit introduces a new wrapper function, shlex_split, that
transparently performs the to_bytes/to_unicode conversions only on
Python 2.
Currently I've only converted one call site (the one that was causing a
unit test to fail on Python 3). If this approach is deemed suitable,
I'll convert them all.
Without this, we could execute «ssh -q ...» and call select(), which
would timeout after the default 10s, and only then send initial data.
(This is a relic of the earlier change where we always ran ssh with
-vvv, so the situation where it would sit quietly never happened in
practice; but this would have been the right thing to do even then.)
