This fix corrects the module state returned by github_module.
Now,
* When the release already exists, state is "ok"
* When the release is created, state is "changed"
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
The code that depends on this is all in the action plugins so we should
leave it there until we either move that action plugin code over
(fixup_perms2) or we give action plugins the ability to register new
config.
* win_setup: Add Product ID and Product Key in facts
So this is actually a very nice way to get product key information from
systems collected centrally.
Especially with systems that have been upgraded from Windows 7 or
Windows 8 to Windows 10 may not have a valid Windows 10 product
license key printed anywhere, it was a digital license.
If you ever have to reinstall the system, you may recover the system
from the recovery partition, or the original media, but cannot upgrade
to Windows 10 for free. By collecting the product key, one can always
reinstall your free Windows upgrade.
My only question is, do we want this to be part of the default facts, as
it may be considered important information. Or should we make a special
**win_product_key_facts** ?
* Add ACPI product key support
* Add integration test
* Remove Get-ProductKey function, move inline
* Inventory caching
* Add inventory caching for virtualbox
* Don't populate cache for virtualbox with stdout, use a dict of inventory instead
* Fix error creating the cache dir if it doesn't exist
* Keep cache default False and set to True in VariableManager __init__
* Check all groups before determining if a host is ungrouped.
aws_ec2 is an inventory plugin intended to replace uses of the `contrib/inventory/ec2.py`
inventory script.
For advanced grouping, please use the `constructed` inventory plugin.
Add deps/requires for fact collectors
Fact collectors can now set a required_facts
class attribute that will be a set of the names
of fact collectors they require to be run first.
ie, if a collector needs to know the ansible_distribution,
it should set it's required_facts to include 'distribution'
required_facts = set(['distribution'])
If a collector requires another collector, it gets added
to the selected collector names.
We then topological sort the ordering of the collectors
so that deps work out (ie, 'distribution' will run before
'service_mgr')
required_facts were added to the collectors for:
- network (requires 'distribution', 'platform')
- hardware (requires 'platform')
- service_mgr (requires 'distribution', 'platform')
Fix name references for facts (need 'ansible_' prefix)
is service_mgr
Fixes#30753
Enforce that there can be only one --new-vault-id or
--new-vault-password-file and use this instead of
--encrypt-vault-id
* Add a config option for default vault encrypt id
* add documentation around commonly-used Facts for Conditionals
There are a few Facts that are often used for Conditionals, so
documenting them on the Conditionals page with their possible values.
* Edit
* win_setup: Add Product ID and Product Key in facts
So this is actually a very nice way to get product key information from
systems collected centrally.
Especially with systems that have been upgraded from Windows 7 or
Windows 8 to Windows 10 may not have a valid Windows 10 product
license key printed anywhere, it was a digital license.
If you ever have to reinstall the system, you may recover the system
from the recovery partition, or the original media, but cannot upgrade
to Windows 10 for free. By collecting the product key, one can always
reinstall your free Windows upgrade.
My only question is, do we want this to be part of the default facts, as
it may be considered important information. Or should we make a special
**win_product_key_facts** ?
* Add ACPI product key support
It is not possible to modify the load balancer configuration
for ECS Service.
As it is possible to detect this, it's nicer to fail gracefully
than return AWS's less meaningful failure message.
Fix PEP8 compliance
Otherwise, it fail with:
Traceback (most recent call last):
File \"/tmp/ansible_c1zmq3i9/ansible_module_openssl_certificate.py\", line 808, in <module>
main()
File \"/tmp/ansible_c1zmq3i9/ansible_module_openssl_certificate.py\", line 787, in main
certificate.generate(module)
File \"/tmp/ansible_c1zmq3i9/ansible_module_openssl_certificate.py\", line 692, in generate
certfile.write(str(crt))
TypeError: a bytes-like object is required, not 'str'
* Verify that acme-tiny is present
* Use run_command rather than subprocess for acme-tiny
Besides consistency with the rest of the code base, this also
add 2 bug fixes:
- ansible should no longer show "warning, junk after json" when using the module
- it also verify the return code of acme-tiny, and so fail when the
verification fail. The previous code didn't check rc, so it would continue
with a empty file
The accumulated collected_facts was being update
with new facts _after_ filtering them. So only
facts that pass the filter would ever be passed
to other fact collectors.
For 'filter=ansible_service_mgr', even though it requires
the platform and distribution facts and even collects them,
they would get filtered out and never passed to the other
collectors that need them (service_mgr for ex).
Fix is just to add the unfiltered facts to collected_facts.
Adds unit tests for fact filter and collected_facts.
Fixes#32286
The search string used to look for Clear Linux
was changed in 45a9f96774 to
be more specific, but was too specific. Now finding
a substring match for 'Clear Linux' in /usr/lib/os-release
is enough to consider a match.
Since the details of the full name in os-release varies
('Clear Linux Software for Intel Architecture',
'Clear Linux OS for Intel Architecture', etc) the
search string match was failing and would fall back to the
'first word in the release file' method resulting in
ansible_distribution='NAME="Clear'
Also add a meta fact indicating which search string
was matched.
Test case info from:
https://github.com/ansible/ansible/issues/31501#issuecomment-340861535Fixes#31501
Extract vault related bits of DataLoader._get_file_contents to DataLoader._decrypt_if_vault_data
When loading vault password files, detect if they are vault encrypted, and if so, try to decrypt with any already known vault secrets.
This implements the 'Allow vault password files to be vault encrypted' (#31002) feature card from
the 2.5.0 project at https://github.com/ansible/ansible/projects/9Fixes#31002
People expect to be able to upload files to s3 using standard
locations for files.
Providing an action plugin that effectively rewrites the `src`
key to the result of finding such a file is a great help.
Tests added, and IAM permissions corrected
* npm module compatible with npm5
Uses the `--long` flag in `npm list` to get the `missing` key back.
* npm: add integration tests
* npm: test the module with npm 4 as well
* Remove debug tasks, use variables
* Use tests instead of filters
* Adds xcambar as a maintainer of the npm module
influxdb_user module has user_name, user_password which may confuse with existing
login arg username and password. Added aliases prefixed ith login_ to
help distinguish.
- Adding Let's Encrypt production ACME directory URL
- Marking examples as one big example with several alternatives for the first step
- Adding another example which uses aliases for options, and uses DNS-01 challenges
This fixes get_vm method to use propertyCollector which
can efficiently find the virtual machine from given VMware
infrastructure using only name.
* VMware: Refactor vmware_guest module
* Add nested paths of datacenter
* Add tchernomax suggestions
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* win_iis_webbinding: Fix bug with ipaddress * returning multiple bindings
instead of only the ones defined as *. Address possible future issues around
hostheader * by just disallowing it. Resolves 25473. Added new test for
this case.
Removed all validation for https binding collisions due to difficulty in
validating all cases in which they could or could not collide. As a
result, also removed return values relating to certificate data.
Updated testing and docs appropriately
* win_iis_webbinding: added break to remove binding loops
* Add monitoring/grafana_datasource module
added ds type mysql and postgres + check of parameters
* Added option max_concurrent_shard_requests for es_version >= 5.6
current_size is returned from the API as string, while self.size
(the requested size) is an integer. This caused the comparison
to always be False, and a resize request to always be sent.
* Moved the encryption to its own action method.
* removed silly default value for encryption type.
* Code formatting issues from pull request ANSIBOT.
* changed version_added to "2.5"
because of new new options available
* changed version_added to "2.5"
because of new new options available
* changed version_added to "2.5"
because of new new options available
* compare arg+aliases between docs and argument_spec
* Add some special handling for the network modules provider options that also appear in the top level arg spec
* Fix error code for bigip_hostname
* Address merge conflicts due to changes in f5 modules
* Update validate-modules ignore based off a clean execution
* Address merge conflicts
* Address renamed module
* Address recent changes to modules
* Add ignore for ucs_ip_pool
* Update aci modules to get more reliable documentation comparison, but not mutating the module_utils aci_argument_spec
* Update ignore.txt after recent aci updates
* Add extra guard to ensure we handle provider special only for network modules
* Address additional changes to modules
* added cloudfont.py, modified cloudfront_facts.py class name and fixed a minor bug
* Improvements to cloudfront_distribution
* Reduce the scope of the cloudfront_distribution module
* Remove presigning
* Remove streaming distribution functionality
* Add full test suite for cloudfront distribution
* Meet Ansible AWS guidelines
* Make requested changes
Fix tests
Use built-in waiter
Update copyright
* Added check to prevent failed empty changesets from being left behind
* Fixing comments from PR 34933, prevent infinte loop and stricter exception catching
* Clarify which ping module to use
Ensure each of the ping modules link to each other
ping - Requires Python on remote-node
nxos_ping - Only on Cisco NXOS
ios_ping - Only on Cisco IOS
net_ping - For network devices
win_ping - only for Windows
* Add additional properties to storage domains
* add warn low space for additional storage properties
* Fixing comments
1. Fixing documentation
2. Use default None
3. Remove redundant if condition
4. remove added discard since it was already added
* Apply comments #2
Fix default value to None
Use percentages instead of GB
* Adds custom_data parameter to azure virtual machine resource
Invoke custom_data in an integration test: This invocation of
custom_data should not cause any side effects.
* Bugfix: String encoding now works in both python2 and 3
* Fix pep8 violations
* Use nginx to serve a text file created via custom_data and verify that
that custom_data is working
* fix up azure_rm_virtualmachine custom_data
* tweaks #25924
* simplify string encoding fun
* don't rely on external packages
There are changes that the merge config can fail, but the module
will still report success. This adds a blob of code to start
collecting those failures and bubbling up a module failure
accordingly.
* adding azure_rm_mysqldatabase
* updates to azure_rm_mysqldatabase
* updates to azure_rm_mysqldatabase
* updates to azure_rm_mysqldatabase
* updates to azure_rm_mysqldatabase
* updates to azure_rm_mysqldatabase
* updates to azure_rm_mysqldatabase
* Updated docs around force_update
* adding azure_rm_postgresqldatabase
* updates to azure_rm_postgresqldatabase
* updates to azure_rm_postgresqldatabase
* updates to azure_rm_postgresqldatabase
* updates to azure_rm_postgresqldatabase
* updates to azure_rm_postgresqldatabase
* updates to azure_rm_postgresqldatabase
* Updated docs around force_update
* describe_images is very slow if not filtered to owner accounts
*or* if the Owners parameter is passed (unless the Owners parameter
is `self`). Convert Owners parameters to `owner-id` and `owner-alias`
filters where possible. Tests with CLI show that `--owners self` is
fast, `--owners 123456789012` is slow (with or without owner-id filter).
* describe_image_attributes fails against accounts other than your
own. Launch permissions are useful information, but not critical.
* first dirty container instance
* added my name ;-)
* more updates
* more updates
* removed unnecessary stuff
* container instance updates
* several fixes
* undo changes in common
* removed unnecessary references, fixed delete
* added / updated parameters
* updated samples & comments
* updated docs, comments, samples and added registry credentials
* added ip address and port
* query existing container instance (but result not used yet)
* some major changes to the module
* more fixes
* added requirement for containerinstance module
* adding integration test
* fixes for pull request
* updated version
* updated version to 2.5
* updated version
* updated integration.cloud.azure.txt as requested by test framework
* removed due to merge reasons
* updated requirements-azure.txt
* undone azure-rm-common
* lf
* properly update test requirements
* first dirty container instance
* container instance updates
* several fixes
* review related updates
* review related fixes
* undo changes in common
* added / updated parameters
* query existing container instance (but result not used yet)
* updated version to 2.5
* updated version
* removed due to merge reasons
* updated requirements-azure.txt
* undone azure-rm-common
* properly update test requirements
* minor fix - sanity
* fix one issue after rebasing
* removed files accidentally added while rebasing
* removed checking for changes
* several fixes
* fixed sanity
* updates as requested by reviewers
* removed ci as it doesn't work
* reenabled ci
* renamed container instance, removed required: false
* removed default: null
* final updates according to the review
* one more fix
* first dirty container instance
* added my name ;-)
* more updates
* more updates
* removed unnecessary stuff
* container instance updates
* several fixes
* undo changes in common
* removed unnecessary references, fixed delete
* added / updated parameters
* updated samples & comments
* updated docs, comments, samples and added registry credentials
* added ip address and port
* query existing container instance (but result not used yet)
* some major changes to the module
* more fixes
* adding integration test
* fixes for pull request
* updated version
* updated version to 2.5
* updated version
* updated integration.cloud.azure.txt as requested by test framework
* removed due to merge reasons
* updated requirements-azure.txt
* undone azure-rm-common
* lf
* properly update test requirements
* review related updates
* first dirty container instance
* container instance updates
* several fixes
* review related fixes
* undo changes in common
* added / updated parameters
* query existing container instance (but result not used yet)
* updated version to 2.5
* updated version
* removed due to merge reasons
* updated requirements-azure.txt
* undone azure-rm-common
* properly update test requirements
* minor fix - sanity
* fix one issue after rebasing
* removed files accidentally added while rebasing
* removed checking for changes
* several fixes
* fixed sanity
* updates as requested by reviewers
* removed ci as it doesn't work
* reenabled ci
* renamed container instance, removed required: false
* removed default: null
* final updates according to the review
* one more fix
* changed location as default from resource group can't handle containers
* updates to container instance
* fixed mistakes during merge
* one more fix
* another mistake
* container instance fixes
* several fixes to container instance
* return value fix
* minor update
* just one api version right now
* fixed api version
* container instance does not suppurt api version
* removed unnecessary try blocks
* removed tags related things
* fixed pep8
* final fixes?
* final updates to the module
* more fixes
* Fix ec2_vpc_net tags
PR #33105 broke the tags returned by ec2_vpc_net - it was returning the raw boto3 list instead of a dict as expected.
* Add a test for tags
* `validate` or `ignore` values may be set by module, credential profile, or env. Module has highest precedence, followed by credential profile, then environment, and defaults to `validate` if not otherwise specified.
* fixes#33455
* IP address pool module and integration tests
* Examples corrected and imports moved to beginning of module.
* Revert ucsmsdk import lines to avoid import sanity test failures.
* Add comment around imports for ucsmsdk.
* Module DOCUMENTATION should match argspec
Large update of many modules so that DOCUMENTATION option name and
aliases match those defined in the argspec.
Issues identified by https://github.com/ansible/ansible/pull/34809
In addition to many typos and missing aliases, the following notable
changes were made:
* Create `module_docs_fragments/url.py` for `url_argument_spec`
* `dellos*_command` shouldn't have ever had `waitfor` (was incorrectly copied)
* `ce_aaa_server_host.py` `s/raduis_server_type/radius_server_type/g`
* `Junos_lldp` enable should be part of `state`.
Fixes # 34917
* Remove spaces from in between interface name
* Convert interface name to lower case as interface name
is case insensitive wrt configuring on remote device.
* Add VnicProfileMapping to register VM
Add vnic profile mappings to be supported in vm registration
* Add VnicProfileMapping to register template
Add vnic profile mappings to be supported in template registration
* Add reassign bad macs to register VM
Add reassign bad macs to be supported in vm registration.
* Add additional mappings params for VM registration
As part of the effort to support DR with oVirt
the "Register" operation is being added with a new mapping parameter
that describes the configuration of the registration.
The idea of supporting DR site to site in oVirt is to have 2 active
setups using storage replication between the primary setup and the
secondary setup.
Both setups will have active DCs, clusters, and hosts, although those
will not be identical.
The user can define a mapping which will be used to recover its setup.
Each mapping can be used to map any VM's attribute stored in the OVF
with its correlated entity.
For example, there could be a primary setup with a VM configured on cluster A.
We also keep an active secondary setup which only have cluster B.
Cluster B is compatible for that VM and in case of a DR scenario theoretically
the storage domain can be imported to the secondary setup and the use can
register the VM to cluster B.
In that case, we can automate the recovery process by defining a cluster mapping,
so once the entity will be registered its OVF will indicate it belongs to
cluster A but the mapping which will be sent will indicate that cluster B should
be valid for every thing that is configured on cluster A.
The engine should do the switch, and register the VM to cluster B in the secondary site.
Cluster mapping is just one example.
The following list describes the different mappings which were
introduced:
LUN mapping
Role mapping
Permissions mapping
Affinity group mapping
Affinity label mapping
Each mapping will be used for its specific OVF's data once the register operation
will take place in the engine.
* Add additional mappings params for Template registration
As part of the effort to support DR with oVirt
the "Register" operation is being added with a new mapping parameter
that describes the configuration of the registration.
The idea of supporting DR site to site in oVirt is to have 2 active
setups using storage replication between the primary setup and the
secondary setup.
Both setups will have active DCs, clusters, and hosts, although those
will not be identical.
The user can define a mapping which will be used to recover its setup.
Each mapping can be used to map any Template's attribute stored in the OVF
with its correlated entity.
For example, there could be a primary setup with a Template configured on cluster A.
We also keep an active secondary setup which only have cluster B.
Cluster B is compatible for that Template and in case of a DR scenario theoretically
the storage domain can be imported to the secondary setup and the use can
register the Template to cluster B.
In that case, we can automate the recovery process by defining a cluster mapping,
so once the entity will be registered its OVF will indicate it belongs to
cluster A but the mapping which will be sent will indicate that cluster B should
be valid for every thing that is configured on cluster A.
The engine should do the switch, and register the Template to cluster B in the
secondary site.
Cluster mapping is just one example.
The following list describes the different mappings which were
introduced:
Role mapping
Permissions mapping
Each mapping will be used for its specific OVF's data once the register operation
will take place in the engine.
* Add support for update OVF store
Add support for task of update OVF store in a storage domain.
* allow shells to have per host options, remote_tmp
added language to shell
removed module lang setting from general as plugins have it now
use get to avoid bad powershell plugin
more resilient tmp discovery, fall back to `pwd`
add shell to docs
fixed options for when frags are only options
added shell set ops in t_e and fixed option frags
normalize tmp dir usag4e
- pass tmpdir/tmp/temp options as env var to commands, making it default for tempfile
- adjusted ansiballz tmpdir
- default local tempfile usage to the configured local tmp
- set env temp in action
add options to powershell
shift temporary to internal envvar/params
ensure tempdir is set if we pass var
ensure basic and url use expected tempdir
ensure localhost uses local tmp
give /var/tmp priority, less perms issues
more consistent tempfile mgmt for ansiballz
made async_dir configurable
better action handling, allow for finally rm tmp
fixed tmp issue and no more tempdir in ballz
hostvarize world readable and admin users
always set shell tempdir
added comment to discourage use of exception/flow control
* Mostly revert expand_user as it's not quite working.
This was an additional feature anyhow.
Kept the use of pwd as a fallback but moved it to a second ssh
connection. This is not optimal but getting that to work in a single
ssh connection was part of the problem holding this up.
(cherry picked from commit 395b714120522f15e4c90a346f5e8e8d79213aca)
* fixed script and other action plugins
ensure tmpdir deletion
allow for connections that don't support new options (legacy, 3rd party)
fixed tests
When using the -c option, like "ansible-config -c ~/.ansible.cfg view"
with python 3, it fail with this error message:
ERROR! Unsupported configuration file extension for b'/home/misc/.ansible.cfg': .cfg
* port elb_classic_facts to boto3
update module to use AnsibleAWSModule
* Add RETURN docs for elb_classic_lb_facts
* Remove superfluous exception handling around connection
Fix exit_json call and RETURN docs
This fixes fact gathering of VMware guest machines with
older Linux Kernel versions. These older Kernels do not support /sys
filesystem which is used to gather virtualization related facts.
'dmidecode' is the safest option to find out virtualization related facts.
Fixes: #21573
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Cache tasks as they are queued instead of en masse
This also moves the task caching from the PlayIterator to the
StrategyBase class, where it makes more sense (and makes it easier
to not have to change the strategy class methods leading to an API
change).
Fixes#31673
* Cleaning up unit tests due to 502ca780
* Add validation for the next to last line of a module
* Fix last error code
* Reduce to a single conditional
* Fix conditionals
* Move the final warnings statement to main() in mysql_replication
oVirt modules support environment variables to be passed as
authentication details for connection. But ovirt_auth doesn't support
it. This patch add support for it.
Change cb1b705218 introduced the newline
parameter on network_cli plugin, but that was never introduced on cliconf.
This causes ios_user to break, since the newline value is never plumbed thru
to network_cli
* updates to azure_rm_sqlserver_facts
* updates to azure_rm_sqlserver_facts
* updates to azure_rm_sqlserver_facts
* updates to azure_rm_sqlserver_facts
* updates to azure_rm_sqlserver_facts
* updates to azure_rm_sqlserver_facts
* updates to azure_rm_sqlserver_facts
* updates to azure_rm_sqlserver_facts
* updates to azure_rm_sqlserver_facts
* updates to azure_rm_sqlserver_facts
Currently the ManageIQ API does not support azure_tenant_id but
this is in the process of being fixed. This commit changes
the recently-committed parameter to allow for the upcoming change.
* Fix persistent command timeout handling
We were using play context timeout on ansible-connect to set
the persistent command timeout handler. Thus, we were ignoring
the persistent_command_timeout setting.
Moreover, even by changing that on ansible-connection, were again
overriding it on cliconf send_command, since in a same process we can
just set a single alarm and cliconf send_command alarm setup is executed
after ansible-connection alarm setup.
* Remove alarm setting on cliconf send_command
The alarm is set regardless before it is executed by ansible-connection.
Setting an alarm again, overrides/disables the previous ones as a single
process can just have a single alarm set.
* Move the setting of persistent command timeout to network_cli
We do also use ansible-connection for connection local, so if a
user provides a timeout via provider that would be ignored if we
set the value on ansible-connection.
Moving that logic to network_cli plugin constructor makes both
connections to work.
* Remove debug statements
* Set the persistent command timeout on task_executor
We can't set the timeout on ansible-connection nor network_cli,
otherwise tasks using provider timeout won't work.
This patch is primarily a refactor to make the validate-modules arg-spec
no longer generate a traceback. It additionally includes removal of deprecated
code in the virtual server module.
The main patch is to remove the traceback generating code. There are
other small fixes that were made in addition to doing that.
* Removed re-def of cleanup_tokens.
* Changed parameter args to be keywords.
* Changed imports to include new module_util locations.
* Imports also include developing (sideband) module_util locations.
* Changed to using F5Client and plain AnsibleModule to prevent tracebacks caused by missing libraries.
* Removed init and update methods from most Parameter classes (optimization) as its now included in module_utils.
* Changed module and module param references to take into account the new self.module arg.
* Minor bug fixes made during this refactor.
The main purpose of this patch is to do the refactor that
supports replacing tracebacks with fail_json. Additionally, the
following was done.
* Removed re-def of cleanup_tokens.
* Changed parameter args to be keywords.
* Changed imports to include new module_util locations.
* Imports also include developing (sideband) module_util locations.
* Changed to using F5Client and plain AnsibleModule to prevent tracebacks caused by missing libraries.
* Removed init and update methods from most Parameter classes (optimization) as its now included in module_utils.
* Changed module and module param references to take into account the new self.module arg.
* Minor bug fixes made during this refactor.
Primarily, this patch contains refactors to remove tracebacks that
are generated when libraries are missing. There is also,
* Removed re-def of cleanup_tokens.
* Changed parameter args to be keywords.
* Changed imports to include new module_util locations.
* Imports also include developing (sideband) module_util locations.
* Changed to using F5Client and plain AnsibleModule to prevent tracebacks caused by missing libraries.
* Removed init and update methods from most Parameter classes (optimization) as its now included in module_utils.
* Changed module and module param references to take into account the new self.module arg. Minor bug fixes made during this refactor.
This patch was primarily an effort to reduce traceback errors for
work that sivel was doing. Part of (and in some cases in addition to)
that, the following was done.
* Removed re-def of cleanup_tokens.
* Changed parameter args to be keywords.
* Changed imports to include new module_util locations.
* Imports also include developing (sideband) module_util locations.
* Changed to using F5Client and plain AnsibleModule to prevent tracebacks caused by missing libraries.
* Removed init and update methods from most Parameter classes (optimization) as its now included in module_utils.
* Changed module and module param references to take into account the new self.module arg.
* Minor bug fixes made during this refactor.
This fix refactor vmware_host module to use PyVmomi.
Also, handle SSLVerifyFault exception to get hostsystem's certificate
thumbprint.
Fixes: #20819
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* aci_aep_to_domain: New module to bind AEP to domain
* Changes to bring in line with aci_domain
* Rename aep_domain to domain_dn, add types
* Fix pylint errors
The jira module uses ansible.module_utils.urls.fetch_url which will
attempt to get that value of the validate_certs parameter from the
module; if present it will honor it's value, otherwise it defaults
to True.
This patch adds that parameter to jira so that it can be specified
by the user and honored by ansible.module_utils.urls.fetch_url
Signed-off-by: Adam Miller <admiller@redhat.com>
* fix broken import
* ansible.module_utils.ec2.HAS_BOTO is already used
* wait_timeout parameter: use 'int' type
* wait is always True there
* doc: use formatting function
* Update validate-modules arg_spec introspection to be faster, by only mocking the imports we explicitly list
* The use of types.MethodType in redhat_subscription wasn't py3 compatible, use partial instead
* Remove argument_spec import hacks, make them errors, we can ignore them with ansible-test
* Enable the --arg-spec flag for validate-modules
* aci_domain_to_vlan_pool: Add domain to VLAN pool
A new ACI module to bind a domain to a VLAN pool.
This module still needs integration tests once it is formally review and
accepted.
* Add examples to documentation
* aci_domain_to_encap_pool: Add domain to encap pool
A new ACI module to bind a domain to an encap pool.
This module still needs integration tests once it is formally review and
accepted.
* Fix domain RN and attributes
* aci_domain: Manage phys, vmm, l2ext, l3ext and FC domain profiles
A new ACI module from the high priority list.
* Add RHEV VMM provider as Redhat
* PEP compliancy
* Make variables specific to domain
* Add examples
* aci_vlan_pool_encap_block: New module to manage VLAN encap blocks
This module is a simplified version of the aci_encap_pool_range module.
* PEP8 fixes (closer to the original)
* Add integration tests
* Mellanox OS name change: MLNXOS changed to ONYX
Signed-off-by: Samer Deeb <samerd@mellanox.com>
* Fix alphabetical order of modules metadata
Signed-off-by: Samer Deeb <samerd@mellanox.com>
Adding "-SyncWindow 0" flag to the Compare-Object call used to determine if the existing and proposed IP address lists are the same. This makes the array comparison mark changes in order as a difference.
Fix for bug #34651
* aci_vlan_pool: Module to manage VLAN pools
This is a simplified version of the aci_encap_pool module.
* Add integration tests, based on aci_encap_pool
* Add new module for managing ospf protocol on mlnxos devices
Signed-off-by: Samer Deeb <samerd@mellanox.com>
* Fix test name, and documentation.
Signed-off-by: Samer Deeb <samerd@mellanox.com>
This module is mostly written to make room for the option of not
setting the `value` parameter while `state=absent`. That choice being
a feature, since it allows both for the removal of individual records
as well as the removal of full record sets.
The opposite goes for the `record` parameter, which needs to be defined
at least by its default value for the module to be able to produce any
meaningful result. Hence making it explicit as part of required_if.
The MX record type is already plenty covered. In addition to the
priority parameter having a default value, the `ensure_dns_record`
method does its own parameter checking.
SRV records on the other hand do need additional parameter
checking. Primarily with the `delete_dns_records` method in mind.
Fixes#23957
* filesystem: list used tools
* filesystem: btrfs and reiserfs don't support resizing
* filesystem: list supported filesystems
use formatting functions and 'filesystem' instead of 'file system'
* filesystem: PEP8
* filesystem: remove useless calls to module.boolean
* filesystem: fail when the requested action isn't implemented
* filesystem: resizefs: list supported FS rather than unsupported
* filesystem: refactor
* filesystem: add integration tests
* filesystem: allow to use image file with 'dev' param
* filesystem: test resizefs (ext2/3/4 filesystems only)
* filesystem: Btrfs, handle older version than v0.20-rc1
* filesystem: use loop keyword (integration tests)
* filesystem: new test, check when another filesystem already exists
* filesystem: add myself as a maintainer
* filesystem: fix tests as filters
* WIP Refactor EOS code to use cliconf
* Fix connection.get where sendonly is True
* Fix pylint issue
* Remove return from send_config and various exec_commands
Also, removed a few try/except, which are anyways handled in
Connection.
This adds a new module called 'vmware_host_config_facts' which
gathers facts about advanced configuration informantion about ESXi host or all
ESXi hosts from given cluster.
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* converted win_updates to an action plugin for automatic reboots
* do not set final result when running under async
* Updated documentation around win_updates with async and become
_name attribute is used when providing generic error messages
(such as connection problems). As AnsibleAWSModule does not inherit
things from AnsibleModule by default, need to provide it.
* First pass at Terraform module
* Support output variables
* Support idempotent plan checks and external plan files
* Add check mode support
* Support custom statefile location & remove color-coding from shell output
* Docs
* Let missing statefile hard-fail
* Update to support present/planned/absent states
* PEP8
* Add docs & fix python 2.6 incompatibility
* PEP8
* PEP8
* Fix misleading cleanup/detach documentation
Current documentation is not concrete regarding desired
state of `detach` to make container be properly removed
with `cleanup`
Make `detach:false` be mentioned explicitly
* Tweak formatting
* eos - Support use_proxy argument
Running ansible with a proxy set in the environment causes the eos module to
attempt to connect to devices via the proxy.
To prevent this behaviour the only way is to unset the proxy out of the
environment, either by wrapping the ansible calls or doing it in a piece of code
executed before connect, such as a vars_module (though this is very hacky).
This change allows you to set `use_proxy: no` under the provider config.
The default value is set to True, which mirrors the behaviour seen today.
* nexos - Support use_proxy argument
Running ansible with a proxy set in the environment causes the nexos module to
attempt to connect to devices via the proxy.
To prevent this behaviour the only way is to unset the proxy out of the
environment, either by wrapping the ansible calls or doing it in a piece of code
executed before connect, such as a vars_module (though this is very hacky).
This change allows you to set `use_proxy: no` under the provider config.
The default value is set to True, which mirrors the behaviour seen today.
* adding azure_rm_postgresqlserver
* removed semicolon placed by mistake
* updates to azure_rm_postgresqlserver
* updates to azure_rm_postgresqlserver
* updates to azure_rm_postgresqlserver
* updates to azure_rm_postgresqlserver
* updates to azure_rm_postgresqlserver
* updates to azure_rm_postgresqlserver
* updates to azure_rm_postgresqlserver
* updates to azure_rm_postgresqlserver
* Updated dependencies
* Allow protection of certain keys during camel_to_snake
Create an `ignore_list` parameter that preserves the case
of the contents of certain dictionaries. Most valuable
for `tags` but other uses might arise.
* Port ec2_vpc_route_table to boto3
Update tests to reflect fixes in boto3.
* Add RETURN documentation to ec2_vpc_route_table
* Update DOCUMENTATION to be valid yaml
* Add check mode tests
* Provide a way to explicitly invoke the debugger with in the debug strategy
* Merge the debugger strategy into StrategyBase
* Fix some logic, pin to a single result
* Make redo also continue
* Make sure that if the debug closure doesn't need to process the result, that we still return it
* Fix failing tests for the strategy
* Clean up messages from debugger and exit code to match bin/ansible
* Move the FieldAttribute higher, to apply at different levels
* make debugger a string, expand logic
* Better host state rollbacks
* More explicit debugger prompt
* ENABLE_TASK_DEBUGGER should be boolean, and better docs
* No bare except, add pprint, alias h, vars to task_vars
* _validate_debugger can ignore non-string, that can be caught later
* Address issue if there were no previous tasks/state, and use the correct key
* Update docs for changes to the debugger
* Guard against a stat going negative through use of decrement
* Add a few notes about using the debugger on the free strategy
* Add changelog entry for task debugger
* Add a few versionadded indicators and a note about vars -> task_vars
* ios_logging: Handle IOS versions that dont put the word host in logging config
This change allows the ansible module to parse and match either variant
being present in running-config.
* ios_logging: enhance logging buffered to handle both size and level
This change allows ios_logging to ensure local (buffered) logging
is configured with both the correct buffer size and logging level,
when both are specified on the task.
* Add test for unexpected egress rule in default VPC
When passing rules_egress to ec2_group, the default
egress rule shouldn't be created (if `purge_rules_egress`)
is set. Test this.
* Respect egress rule defintions for default VPC groups
When passing rules_egress and purge_rules_egress, the
default egress rule should not be created
Fixes#34429
* Change AWS credential passing to be YAML anchors
Vastly simplify the AWS tasks by reducing the credentials to a YAML
block
This fix adds rpm.error exception which is raised when
API unable to get envra information from RPM package.
Also, adds integration test for local_envra method.
Fixes: #30074
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* wrap boto3 connection in try/except and handle exception, add traceback import
* params dont need to be mutually exclusive and support check mode
* add check to set nacl_ids to empty list instead of None for boto3 func
* standard exception handling using traceback
* update current RETURN documentation which is incorrect.
* update logic to check for and return ipv6 cidr instead of ipv4 cidr in a NACL
* ignore default and reserved rule numbers - greater than 32766
* was breaking on non-standard protocol numbers - AWS nacls now support full list -1 to 254
* update port range and icmp type/code handling
* add some more detail to returned nacl entries
* Update exception handling to account for BotoCoreError
Remove exception handling from the boto connection creation since it does nothing
* rules numbers from 32767 to 65535 are reserved for internal AWS use so we ignore here
* Add some integration tests for ec2_asg.
* Remove exception handling from ec2_asg boto3 connection since it is handled in boto3_conn().
* Update test failure assertions
* Use yaml anchor for credentials and remove unnecessary dependencies.
* Move AWS boto3 module credentials tests to separate target
* Remove filters from tests
* Add new module mlnxos_protocol for enabling disabling protocols on
MLNX-OS Mellanox network devices
Signed-off-by: Samer Deeb <samerd@mellanox.com>
* Fix Test Class name
* Fix IP routing protocol support
Signed-off-by: Samer Deeb <samerd@mellanox.com>
* Add missing support for check_mode, and Fix documentation
Signed-off-by: Samer Deeb <samerd@mellanox.com>
* remidate Windows debugging
Using $complex_args is not working (anymore?). We need to set $params directly.
* Fixing issue with win_iis_website parameter types
There are two types of attributes. "String" and "Configuration Attribute". We need to get the real "value" based on the type.
* Revert "remidate Windows debugging"
This reverts commit df75d3bb0d152b10c24187ce4c643b4733bae336.
* win_domain_user allow to update generic attributes
Signed-off-by: Marko Koehne <marko@mkoehne.de>
* win_domain_user.py fixed indentation
Signed-off-by: Marko Koehne <marko@mkoehne.de>
* win_domain_user.py attributes add version_added
Signed-off-by: Marko Koehne <marko@mkoehne.de>
* win_domain_user.p1 removed attributes from result
Signed-off-by: Marko Koehne <marko@mkoehne.de>
* moved run_change outside of if statement
* cs_network_offering: streamline docs a bit
* cs_network_offering: format traffic type as returned by API
* cs_network_offering: rename return to service_offering_id
* cs_network_offering: ensure absent tests don't require anyting else than name
* cs_network_offering: beautify the default_egress_policy param
* cs_network_offering: test enabling/disabling with existing syntax
* cs_network_offering: rename service_provider_list to service_providers
* cs_network_offering: allow update max_connections
* cs_network_offering: extend returns
* cs_network_offering: extend tests with max_connections
* cloudstack: rename cs_serviceoffer to cs_service_offering
* adjust references to old name
* cs_service_offering: fix limitcpuuse not handled
* minor docs fix
* update changelog
A bug in the parsing of single commands with commas
Token cleanup
Password argument now defaults to false
Addition of coding conventions from v3 conventions
This module can be used to add license offerings to a pool. This
is the second part required to license a remote device from a
BIG-IQ (the first being to create a pool with bigiq_regkey_pool)
* Don't use getattr in _get_parent_attribute to avoid recursion issues
Fixes#23609
* Move extend/prepend to field attribute
Also removes _get_attr* methods that were basically just calling
_get_parent_attribute because it needed to set those params.
Also modifies _get_parent_attribute() to pull those values from the
FieldAttributes instead of using the ones passed into the function.
* Better fixes for _get_parent_attribute
* Removes deprecated code from bigip_monitor_tcp
The deprecated code was moved into its own modules. We let it lay
here for a release, and now I'm removing it.
* Fixing upstreaming tests
This module can be used to create GTM servers (not to be confused with
GTM virtual servers) on a BIGIP. GTM servers are a component of the
datacenter, and GTM virtual servers are their members.
* basic.py: add mock to os.path.exists
* set_*_if_different: if check_mode enabled & file missing: set changed to True
Fixes#32676
Thanks to mscherer and Spredzy for the distributed triplet programming
session!
* Add integration test for missing attempts in until with failed/changed_when
* Extend tests to validate additional known behaviors of do-until loops
* Inject attempts into result earlier
The short-circuiting of include_role in TaskExecutor was using the _task object
in the result dictionary. This causes the playbook class to be serialized, which
is something we no longer do due to speed/size problems with nested objects.
Simply removing this should fix a lot of memory and speed problems with include_role.
This fix adds new module for managing various roles in
local ESXi server. Also, adds integration tests for this change.
Fixes: #27899
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
Code refactor to use f5 coding conventions. Removed deprecated
"enabled/disabled" params (this is now a state). Adds token cleanup
for cases where many api calls are made.
* Count ignored failed tasks and successful tasks with expected failure as failed tests.
* Make junit callback plugins changes backward compatible: add new task marker TOGGLE RESULT and new option fail_on_ignore
* Added a new module to fetch Avi Controller version and data
* Updated copyright notice.
* setting options to empty as all of it is coming from common args.
This refactors the bigip_virtual_server module to address several issues and
missing features. Additionally it adds tests and updates the coding standards
to the recent version used by f5. Finally, it removes deprecated items that
were announced in 2.4
* Use `AnsibleAWSModule`
* Update exception handling to use `fail_json_aws` and check
for `BotoCoreError` exceptions associated with bad connection
parameters.
* Remove connection creation exception handling as it does nothing.
* update DOCUMENTATION for network_cli and netconf
This updates the DOCUMENTATION string for both the netconf and
network_cli connection plugin.
* add additional options to the connection documentation
* update documentation based on review and feedback
* adds persistent connection options to documentation string
This fix adds support for Virtual Machine resource allocation
information. This information is related to limit and reserve CPU and Memory
of virtual machine.
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* mutually_exclusive add - ios_config parents works with lines by not src
* mutually_execlusive parents,src added to all other net modules
* tests for mutually_exclusive parents,src and whitespce removal
Currently the manageiq remote management module only supports
OpenShift, AWS and oVirt. This adds the ability to create VMware
providers by adding two additional parameters for configuring a
host VNC range.
The DigitalOcean API v2 supports creating a block storage volume from
a previously-saved snapshot using a snapshot_id string. This module now
likewise supports creating a block storage volume using a valid
snapshot_id string.
When creating a block storage volume from a snapshot_id using the
DigitalOcean API, the region and size_gigabytes parameters are ignored.
Therefore, these parameters are likewise ignored when using this module.
However, as of this commit, they are still required fields. It may be
necessary to find some way to eliminate these requirements if the
snapshot_id parameter is included.
The DigitalOcean API v2 allows for creating a block storage volume from
a previously-saved snapshot using the snapshot_id parameter. If this
parameter is used, the region and size_gigabytes parameters are
disregarded. In order to avoid confusion, when the snapshot_id parameter
is included when creating a block storage volume using this module, the
region and block_size fields are overridden and changed to null values.
This should make it clear that these values are NOT being used if a
snapshot_id is present.
This module will still fail as before if neither the region/block_size
or snapshot_id is not present when creating a block storage volume.
Documentation has been updated to reflect these changes.
* obscure type promotion issue in some versions of Powershell causes [int]::MaxValue to be promoted to [int64] when doing a COM property get or set. Since the "All" profiles value of 0x7FFFFFFF is [int]::MaxValue, it would trigger "Specified cast is not valid" when modifying a rule that's already set to All Profiles or trying to be.
* Fixed catch-all error handler to include exception detail
* Added test converage for this case
* Add Windows Domain facts for membership and server type
Adds additional facts to setup.ps1 for Windows hosts
* ansible_windows_domain_member - returns true if machine is domain
joined
* ansible_windows_domain_role - indicates role of machine in domain
Roles list is taken from
https://technet.microsoft.com/en-us/library/ee198796.aspx and will
return sensible values for non domain joined machines too.
* Use $win32_cs rather than Get-CimInstance Win32_ComputerSystem for consistency
* Begin rewrite of win_iis_webbinding
Add integration testing, check mode and idempotency
Add support for SNI
Fix replacing SSL cert on existing bindings
* finished up initial rewrite of win_iis_webbinding
* updated test to remove tests as filters
* updated win_iis_webbinding docs
* fix more doc/formatting issues win_iis_webbinding
* Removed string empty defaults for certs. Added a few new helpful
comments.
* Revert "Removed string empty defaults for certs. Added a few new helpful"
This reverts commit 48f35faea8d5294b34e1aa842a95c9352b90257f.
Remove examples from main section and make sure it is all in the examples. Should helpw ith the HTML breakage (it is too wide for most monitors).
tyop fixes too.
* Add module mlnxos_linkagg for configuring LAG and MLAG on Mellanox
switches
Signed-off-by: Samer Deeb <samerd@mellanox.com>
* Remove unnecessary method in unit-test
remove _execute_module and use execute_module from base class
* Add eos_interface module
* Implementation of eos_interface module
* Intergration test for eos_interface module
* Minor fix in eos_l3_interface module
* Minor fix in ios_interface integration test
* Fix CI issues
* Fix more CI issues
* Updated Avi Modules with following
1. Support to perform patch operation using the modules. The data update method is
selected using avi_api_update_method=patch and patch operation is determined by
avi_api_patch_op. The patch data is the normal params that are provided in the modules
2. Support for avi_credentials as single authentication dictionary for all API calls.
This is preferred way as opposed to previously all credentials details would pollute
the individual Ansible tasks. It also allows the module development to be enhanced
without breaking compatibility for new authentication schemes like SAML etc.
3. Support for sharing api_context between the module invocations. This is a
workaround to not do multiple logins to Avi Controller and be able to
re-use single login across multiple REST API calls.
4. Documentation update for new parameters and existing ones with Units data.
* Fixed the pylint and pep8 errors caused due to pycharm editor auto formatting
* update version parsing and move requirements to nso_* modules
prepare for introduction of nso_show module that has other version
requirements than the existing nso_* modules.
* Add nso_show module for retreiving config from Cisco NSO
New module that supports getting configuration and operational data
from Cisco NSO.
This fix adds user friendly message for 'type' argument.
The 'type' is a required param when performing 'create' or 'modify' operations
on network connection or device.
Fixes: #33680
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
Shell is implemented via the command module. There was a special case
in mod_args to do that. Make shell into an action plugin to handle that
instead.
Also move the special case for the command nanny into a command module
action plugin. This is more appropriate as we then do not have to send
a parameter that is only for the command module to every single module.
* vhba template and integration test
* SAN Connectivity Policies and integration test
* VSANs and integration tests
* WWNN/WWPN Pools and integration test
* WWNN/WWPN Pools and integration test
* option description spelled out (aliased to descr)
removed docs for list of dictionaries syntax
follow ACI indent style
state absent only requires dn name match (not full prop match)
* vhba template and integration test
* SAN Connectivity Policies and integration test
* VSANs and integration tests
* WWNN/WWPN Pools and integration test
* VSANs module and integration test
* removed docs for list of dictionaries syntax
follow ACI indent style
state absent only requires dn name match (not full prop match)
* vhba template and integration test
* SAN Connectivity Policies and integration test
* VSANs and integration tests
* WWNN/WWPN Pools and integration test
* vHBA templates and integration test
* option description spelled out (aliased to descr)
removed docs for list of dictionaries syntax
follow ACI indent style
state absent only requires dn name match (not full prop match)
* vhba template and integration test
* SAN Connectivity Policies and integration test
* VSANs and integration tests
* WWNN/WWPN Pools and integration test
* SAN Connectivity Policies only
* option description spelled out (aliased to descr)
removed docs for list of dictionaries syntax
follow ACI indent style
state absent only requires dn name match (not full prop match)
* disk can be mounted to vm
* add version added
* fix lint
* Fix some mirrors
* fix lint
* remove trailing space
* fix as review comment
* fix yaml
* fix
* fix
* Minor update to doc on unmounting disk from VM
* WIP adds network subnetting functions
* adds functions to convert between netmask and masklen
* adds functions to verify netmask and masklen
* adds function to dtermine network and subnet from address / mask pair
* network_common: add a function to get the first 48 bits in a IPv6 address.
ec2_group: only use network bits of a CIDR.
* Add tests for CIDRs with host bits set.
* ec2_group: add warning if CIDR isn't the networking address.
* Fix pep8.
* Improve wording.
* fix import for network utils
* Update tests to use pytest instead of unittest
* add test for to_ipv6_network()
* Fix PEP8
* Update task definitions for network_cli
* Add connection to debug messages
* Specify connection for prepare task
* pc won't be around for connection=network_cli
* Assorted Python 3 fixes
* Give default port if ansible_ssh_port missing
* delegate -> connection
* Extend error regex
Code refactoring of ipa_dnszone module
- use ipa_argument_spec
- use common documentation fragment
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Added module new win_disk_facts
* Corrected examples section
* Added integration tests
* Added some disk properties
* Removed whitspaces
* Extended docu
* Changed header
* Added partition, volume and physical disk output
* Removed MediaType property of phys. disk
* Added return values
Added virtual disk, volume and physical disk output
* Added docu for return values
* Removed whitespaces
* Improved and added values
- Added virtual disk return values
- Improved code
* Updated docu
* Removed whitespaces
* Removed check
* Improved code and docu
* Changed integration test
* Changed integration test
* Changed integration test
* Changed integration test
* corrected typo
* Added admin test because CIM is not available with user rights
* Changed unit prefix from decimal to binary
This fix check if DNS4 is None or not before proceeding with
other operations. Also, added unit test for this change.
Signed-off-by: Fedor Sumkin <qosys.net@gmail.com>
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
This fix adds 'port' as module parameter in VMware modules,
which allows user to specify vCenter or ESXi server port number for
admin connection.
Fixes: #34070
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Deprecate check_invalid_arguments
Check_invalid_arguments is a piece of functionality from the early days
of Ansible that should not be used. We'll remove it in Ansible 2.9.
Deprecating it for now.
* Add eos and fix tests to run multiple connections
* Update tests to report connection
* Add missing START messages
* Fix unspecified connection
* Python 3 updates
Exceptions don't have `.message` in Python 3
* Override `become` when using `connection=local`
* Slight restructuring to make eapi easier later on
* Move eapi toggle to prepare_eos
* Pull out connection on eapi tasks
* Fixing save so it still works. Adding changed as an option for save_when.
* Updating description to state that changed was added in 2.5.
* Fixing removal version for deprecated options.
* Add a lookup plugin for AWS account attributes
* PEP8
* Use config system instead of hard coding logic for environment variables
* simplify logic
* Return a flattened dict to make using easier
* Reformat return example
* Adds k8s.py
* Two module approach to support overlapping objects
* Clarify docs
* Clary state and force parameters
* Updates examples
* Add description and display_name
* Fix linting issues
* winrm: attempting to get kerb auth to work on MacOS
* moved to use pexpect if possible as it is simpler
* Made the pexpect event more lenient around different localisations
* Changed basic auth from NetworkCredential to Base64
* Added force_basic_auth parameter to win_get_url module
force_basic_auth provides user with option to control which mechanism to use
Updated win_get_url.py documentation section
* Add missing version_added in win_get_url.py
* minor update for documentation
Split the one monolithic test for basic.py into several files
* Split test_basic.py along categories.
This is preliminary to get a handle on things. Eventually we may want
to further split it so each file is only testing a single function.
* Cleanup unused imports from splitting test_basic.py
* Port atomic_move test to pytest.
Working on getting rid of need to maintain procenv
* Split a test of symbolic_mode_to_octal to follow unittest best practices
Each test should only invoke the function under test once
* Port test_argument_spec to pytest.
* Fix suboptions failure
Currently when we make up the return value, we take values based of the
parameters rather than the generated openssl_certificate itself.
This commits returns the actual certificate values making it all time
accurate.
https://docs.python.org/2/library/stdtypes.html#str.split
str.split([sep[, maxsplit]])
If sep is given, consecutive delimiters are not grouped together and are deemed
to delimit empty strings.
>>> "85563 ----------------C-- /var/lib/libvirt/images".split(' ')[0:2]
['85563', '']
>>> "85563 ----------------C-- /var/lib/libvirt/images".split()[0:2]
['85563', '----------------C--']
* Fixes a prompt doubling issue that impacted missing ios enable password prompts.
Due to get_prompt sending a '\n' the prompts became doubled and out-of-sync with what
was expected. This caused the enable command prompts to be missed.
Also added verification that on_become succeeded to reach enable prompt.
* Moved prompt doubling comment per shippable
This fix check for ESXi server instance before proceeding
with managing local user. Also, adds integration tests for
this change.
Fixes: #32465
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Add parent pid to persistent connection socket path hash
Fixes#33192
* Add parent pid in persistent connection socket path hash
to avoid using same socket path for multiple simultaneous
connection to same remote host.
* Ensure unique persistent socket path for each ansible-playbook run
* Fix CI failures
* Port ec2_vpc_net to boto3 and add support to expand existing VPCs
* Add s-hertel as an author for ec2_vpc_net
* Update ec2_vpc_net test for new error triggered by lack of credentials
Fix backwards compatibility
Document new return value
* Fix pep8 and return documentation
* Remove boto usage from boto3 modules
* Remove region checking
boto3_conn now takes care of region checking and handles NoRegionError
exceptions with a standard message
boto3_conn also takes care of other connection exceptions too.
* Document boto3 as a requirement for ec2_eni_facts
* Return id of ENI in addition to network_interface_id. To be compatible to ec2_eni.
* Added documentation for the return values of the ec2_eni_facts module
* Fix typo in docs for ec2_eni_facts
Provide Vault App role method to the lookup.
https://www.vaultproject.io/docs/auth/approle.html
Usage :
`{{ lookup('hashi_vault', 'secret=secret/hello:value auth_method=approle role_id=myroleid secret_id=mysecretid url=http://myvault:8200')}}`
You can skip `role_id` and `secret_id` if you set `VAULT_ROLE_ID` and `VAULT_SECRET_ID` environment variables.
* new package_facts module
Signed-off-by: Adam Miller <maxamillion@fedoraproject.org>
* remove package_facts pkg manager aliases, they are misleading
Signed-off-by: Adam Miller <maxamillion@fedoraproject.org>
* fix package_facts tests now that aliases are dropped
Signed-off-by: Adam Miller <maxamillion@fedoraproject.org>
* Initial commit for UcsConnection and ucs_macpool module.
Configures MAC address pools on UCS Manager.
* ansible-doc fixes
* PEP8 fixes
* pep8, pylint, and validate-modules fixes
* Correct indent issue introduced during pycodestyle cleanup
* Simplified module arugment setup.
Placed all code in main to avoid multiple calls and arg passing.
* module_utils/ucs changed to UCSModule which now handles login/logout directly
login_handle removed from module.params
doc updates on mac_list params and change to first_addr/last_addr for mac blocks
checking of all mac params
* Move module_utils to remote_management/ucs
Fix validate-modules issue with docs
* UCS MAC pool integration tests
Fixed issues with MAC pool descr and address range params
* Fixing aruba's inconsitent indenting.
* Adding config with different children indentation and unit test to confirm the different spacing does not matter.
* Fixing pylint check. Missed an r prefix.
* Added icinga2_host module
* Fix build error
* trailing spaces and other errors from ansible build process
* Formating
* docu errors
* last spacing; import module
* fix imports
* Removed request lib for ansible.module_utils.urls
* small whitespace fixes
* Remove typo
* Fix docu
* icinga2_hosts to icinga2_host in naming
* Update example
Fix Dewotine error when delete a none existing host
* Fixes docu problems
* White spaces
* small text improvements
* Remove force argument from module and docu
* Set author correct ( and hopefull the maintainer )
* Minor formatting changes
`os.environ['DO_API_TOKEN']` raised a `KeyError` preventing the check
for `os.environ['DO_API_KEY]` from being executed. Fix this by failing
only if the api token isn't set.
* When inserting a new rule in `insert_after_rule`, check if the old rule is
the last rule, to avoid a list index out of range error when attempting to
access the next rule.
* Add a test for inserting a new rule after the last rule.
* Bug Fixes to issues foubd during testing
* Removing blank line
* undefined-variable Undefined variable 'run_commands' and training new line
* Reverting and Modifying changes with both Unit test and Integrated test with Devices passing
Allow CamelCase version of snake_dict_to_camel_dict
(currently only dromedaryCase is supported)
Add reversible option to camel_dict_to_snake_dict
Add tests for both of these options
* Fix vyos on network_cli on python3
bytes do not have format() in Python3
* Push connection to tasks, with bonus connection=local test
* Run tests without explicit connection set
* Add/update START messages where appropriate
open(path) throws an error when called on a directory or UNIX socket,
and therefore a check to ensure that the path is absent will always
succeed when there is a directory or file located there.
This updates the check to use os.access(path, os.F_OK) instead, which
instead just checks that the path exists instead of trying to open it as
a file, and therefore properly handles directories and sockets.
This causes a slight semantic change in how permissions are handled.
The existing code will fail to work correctly if the user running the
module on the managed host has no read access to the path specified.
The new code will work correctly in that situation.
Both versions fail if the user can't traverse the parent directory.
I've also added a check to the try block to catch OSError. I've seen
this call fail with an OSError on rare occasion in the face of odd
extended permissions (usually MAC configuration) in cases where it
should technically return False. In such cases, the file is functionally
inaccessible to the user making the call, so it's essentially not there,
but it can't be created by them either. I've documented this, as well as
the fact that the bug this change fixes exists, and a rather nasty
inconsistency involving symbloic handling that I stumbled across while
testing this change.
Fixes: #20870
* vmware_host: add reconnect and add_or_reconnect states
Add "reconnect" and "add_or_reconnect" choices for "state".
* reconnect: reconnect an esxi to a vcenter (imply it is present).
* add_or_reconnect: do the same but add the esxi if absent.
Also:
* tag the cluster_name as required (because it is).
* tag esxi_username and esxi_password as not required because
they aren't when the esxi isn't added.
* vmware_host: add + prepare/document integration tests
vmware_host module
Add integration test for the add part of "add_or_reconnect" state.
Prepare and document integration tests for the reconnect part
of "add_or_reconnect" state and "reconnect" and "absent" states.
Currently we can't test those states as ReconnectHost_Task (for
"reconnect") and EnterMaintenanceMode_Task (for "absent") aren't
implemented yet in vcsim (from vmware/govmomi)
* Readded vital return parameters to the ec2_asg that have been spared for no obvious reason
* Fix typo in ec2_asg docs
* Fixing another typo in ec2_asg docs.
* Fixing save so it still works. Adding changed as an option for save_when.
* Updating unit tests.
* Updating description to state that changed was added in 2.5.
* Added new module: Azure RM SQL Servers
* fixed sanity issues
* enabled integration test
* disabling test as Microsoft.Sql namespace not available
* renamed servers -> server
* updates as requested in the review
* udpates to sql server
* renamed module
* replaced has_key by in
* flattened results
* final updates to sql server
* updates as requested in the review
* added more tests
* deleting unexisting instance up front
* more tests
* another round of test changes
* removed uneeded test
* Change cast_list_to_dict to more generic rekey_on_member
cast_list_to_dict was taking an arbitrary data format in and returning
an arbitrary data format out. Rework this to be a more generic function
which creates a dict of dicts based on a member of the dict.
Remove cast_dict_to_list since rekey_on_member handles the use cases we
know about and cast_dict_to_list suffers from the same problems as
cast_list_to_dict. If this is still needed we could think about filters
we could add to do this in a short jinja2 pipeline.
* Fix bare excepts (bare excepts even catch sys.exit())
Previously if a child's group vars section was defined before the
child group itself, an edge case would be hit where the state of the
pending declaration would process as var and therefore drop the
child pending declaration context. This would result in the group
vars defined for the parent group being out of scope for the child
group.
Example:
[web:children]
appnodes
proxies
[web:vars]
deployment_type=prod
[appnodes:vars]
foo_var=true
[appnodes]
appnodes[1:3].example.com
[proxies:vars]
bar_var=true
[proxies]
proxies[1:3].example.com
Previously the deployment_type variable would be out of scope for
both the appnodes and proxies groups. This patch fixes that.
Signed-off-by: Adam Miller <maxamillion@fedoraproject.org>
* allow multiple values per key in name fields in openssl_certificate
* check correct side of comparison
* trigger only on lists
* add subject parameter to openssl_csr
* fix key: value mapping not skipping None elements
* temporary fix for undefined "subject" field
* fix iteration over subject entries
* fix docs
* quote sample string
* allow csr with only subject defined
* fix integration test
* look up NIDs before comparing, add hidden _strict params
* deal with empty issuer/subject fields
* adapt integration tests
* also normalize output from pyopenssl
* fix issue with _sanitize_inputs
* don't convert empty lists
* workaround for pyopenssl limitations
* properly encode the input to the txt2nid function
* another to_bytes fix
* make subject, commonname and subjecAltName completely optional
* don't compare hashes of keys in openssl_csr integration tests
* add integration test for old API in openssl_csr
* compare keys directly in certificate and publickey integration tests
* fix typo
This fix adds following:
* Documentation update
* Add support for DHCP
* Refactor code to use PyVmomi class
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* firewalld: Implement zone operations
Zones are removed or added when no other operations are used in
conjunction with the keywords 'present' or 'absent'.
This leads to a logical and natural syntax of:
- firewalld:
zone: foo
state: present
for adding or removing zones.
Signed-off-by: Felix Kaechele <felix@kaechele.ca>
* firewalld: zone ops: addressed review concerns
- Added more documentation on the peculiarities of the zone operations
- Output meaningful error messages when trying to use zones incorrectly
Signed-off-by: Felix Kaechele <felix@kaechele.ca>
* ACI Encap Pool: Add new module to support VLAN, VXLAN, and VSAN Pools
* update logic for allocation_mode
* update docstring and tests
* Update filter_target since url method has been updated
This fix removes a deprecated Postgresql User role attribute
called 'CREATEUSER' and 'NOCREATEUSER'. Also, updated documentation
for deprecation.
Fixes: #24928
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
On Fedora Atomic Host, there is no yum or dnf, but the module ot use to
install package should be atomic_container. We verify that this is
a Fedora Atomic Host with rpm-ostree, not atomic since atomic
can be used on a regular non ostree distribution.
* Fix _clean_result for debug callback with 1 char var names
The check in _clean_results was removing any keys that happened
to be one of the chars in ('invocation') instead of the string
'invocation'. This was meant to be a tuple but there was no comma
so the for iterated the string instead of the tuple.
Introduced in 9dba580204fcc7d95d4ca2ea2ae4ce23fe28c2ed
Update unit test to catch this.
Fixes#33723
* Use .pop() to remove invocation from results dict
In base callback _clean_results, simplify the way the
'invocation' item is removed.
Add some more unit tests.
* Deprecate Entity, EntityCollection and use subspec in network modules
* As per proposal https://github.com/ansible/proposals/issues/76
deprecate use of Entity, EntityCollection, ComplexDict, ComplexList
and use subspec instead.
* Refactor ios modules
* Refactor eos modules
* Refactor vyos modules
* Refactor nxos modules
* Refactor iosxr modules
* Add support for key in suboptions handling
* Fix CI issues
* Refactor cloudscale API code
Move code common to all cloudscale cloud modules into a common base
class.
This is needed as a prepartion of the cloudscale_floating_ip module.
* cloudscale_floating_ip module
New cloud module to manage floating IPs on the cloudscale.ch IaaS
service.
* Update zabbix_host documentation (extend ipmi_-documentation, and update style to be consistent on the rest while we are at it)
* Remove ipmi_parameters being added to the API call when not required
* remove optional parameters from add_host, as well
Fix a bunch of things mentioned in the review.
Delete commented code from module. Add fix for vcsim not returning
uncommitted.
Add integration test.
Add changes suggested
* A first pass at moving libs to new dir structure
The network modules changed their module_utils dir structure.
This first patch establishes mod utils for F5 in this new structure.
Module use will be limited until things are more fleshed out
* Fixing upstream errors
* Fixing more issues
The command module docs were unclear. They talked about ignoring the user's environment which lead people to believe the user's environment variables were not used. In actual fact, the user's environment variables are used. They just are not expanded in the command.
* Bulk pep8 fixes - hand crafted
Fix by hand the remaining issues that autopep8 couldn't
* Next batch of hand crafted pep8 fixes
* Ignore W503
https://github.com/PyCQA/pycodestyle/pull/499
* Revert more of W503
* python3 support for letsencrypt module (fixes#30690)
* initialize result to a dict in some methods to prevent 'NoneType is not iterable' TypeError
* use dict.get() to retrieve values from info dict to prevent KeyError
* convert to/from text/bytes using _text methods for PY3 support
* Fail when attempting to modify unmodifiable target group parameters
As you can't modify Port, Protocol or VPC id for a target group, fail
when this happens rather than pretending to do it.
One could argue that the target group could be recreated rather than
failing, but this has massive knock on implications to other resources
that depend on the TG (all ASGs would need to be updated, the ELB
listener would need to be updated, etc)
* Use `.get()` instead of direct dictionary access
* Added modules to create, delete, and describe EC2 Placement Groups.
* Remove unnecessary print statement
* Update to use boto3.
* De-linting
* Remove facts from this PR
* Update to newer method of handling Boto3 connections and exceptions.
* Futzing around with imports and HAS_BOTO3
* Fix up exception imports.
* Remove redundant default.
* Handle DryRunOperation errors appropriately.
* Remove redundant BOTO3 check.
* Use shorter licence declaration.
* Remove redundant HAS_BOTO3 import.
* Add AWSRetry decorators to API calls.
* Add new 'strategy' parameter to allow for cluster and spread PGs.
`ansible-vault` is the only cli command which knows how to handle the
rekey options `--new-vault-id` and `--new-vault-password-file`. No
point in exposing those rekey options to any of the other ansible
commands.
On a practical level I think this matters most in ensuring that
`--help` doesn't produce any false/unhelpful output.
* fixes guess_os for netconf connections
This change fixes invalid calls to play_context when the network_os is
not set and the connection attempts to guess the network_os. The method
will now check the correct values for ssh key file and allow agent
instead of returning errors.
* fix up pep8 issues
* Zabbix 3.4 support fix.
As of 3.4 Zabbix version application does not have 'updateExisting'.
* added updateExisting in applications for old zabbix support.
* small codestylefix
This fix adds following:
* hosts as argument spec
* cluster_name as argument spec
* refactor to use Pyvmomi class
* API refactor and documentation
Fixes: #18980
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* add acr
* acr
* acr
* fix a minor error
* add tests and fixes as suggested
* use get_mgmt_svc_client to enable bi
* fixes as zim suggested
* code refinement
* get acr instance before update
* fix a bug
* remove Classic sku as it's going to deprecate
* pass sanity test
* fix sanity
* fixes based on comments
* fix broken namespace unregistered error
* fix a bug
* fix a bug
* fix
* add register namespace
* fixes tests
* remove pdb
* add ci azure test
* removed required: false
* renamed acr -> containerregistry
* fixed spelling mistake
* fixed idempotence
* fix for idempotence was wrong
* fixed a few issues
* different log when exception different than ResourceNotFound
* self.fail instead of log
* updated sample return value
* added login server in results
* fixed else
* fixed line too long
* cmp -> __ne__
* fixed trailing whitespace
* output.changed is false when instance updated
* fix for state change
* one more update
* update instance only when location or sku has changed
* fixed syntax error
* fixed acr test
* just removed unnecessary comment to trigger ci
* update return value shape
* flatten `state`
* change credential dictionary state
* add credentials to integration tests
* fixed: win_copy: typo "file file" (double "file")
Signed-off-by: Alexey Shumkin <Alex.Crezoff@gmail.com>
* Add quotes around filenames/directories
* Fix tests for new quotes
* Fix tests for new quotes
* One more ?
* Another one...
* Added module to describe EC2 Placement Groups.
* Update to newer way of handling Boto3 connections and exceptions.
* Futzing around with imports and HAS_BOTO3
* Fix up exception imports.
* Fix license block
* Correct task indenting in doc
* Added list-filtering example to docs
Without this additional code snippet `ansible-pull` will still accept
the `--vault-id` option. It just won't pass the option along when
invoking `ansible-pull`.
* - Netconf plugin addition for iosxr
- Utilities refactoring to support netconf and cliconf
- iosx_banner refactoring for netconf and cliconf
- Integration testcases changes to accomodate above changes
* Fix sanity failures, shippable errors and review comments
* fix pep8 issue
* changes run_command method to send specific command args
* - Review comment fixes
- iosxr_command changes to remove ComplexDict based command_spec
* - Move namespaces removal method from utils to netconf plugin
* Minor refactoring in utils and change in deprecation message
* rewrite build_xml logic and import changes for new utils dir structure
* - Review comment changes and minor changes to documentation
* * refactor common code and docs updates
In case of workflow delete action, the returned 404 status code
considered as invalid although it's a valid code for not found (deleted)
entity.
Removed verification of the status. Only success should be verified.
Fixes#33524
* Fix typo in net_logging/eos
* This seems to be required to use eos_user in this way
* Fix indentation in net_static_route/eos
* Rework interface check in eos_vrf
This should do the right thing.
This fix make error message easily understable which is provided
by vcenter or ESXi server.
Fixes: #24672
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Adds a tmsh command fallback
The bigip terminal plugin assumes that the remote shell is tmsh.
This is not always true. The remote shell may be bash sometimes.
This adds a different shell command in the case that bash is the
remote shell
* Fixing upstream errors
This fix adds functionality to configure vmware guest parameter called
'maxMkconnections'. Also, added integration test for this change.
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
This fix adds functionality to support memory_reservation and
memory_reservation_lock while managing Virtual Machine.
Fixes: #20407
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
This fix adds missing comma in different modules.
This removes implicit string concatenation in given list.
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
