* Refactoring of cnos_interface module like what followed by other vendors
* To remove cnos-interface from E326 validation ignore list
* Effect of default parameters impacted UT
* Revert "allow caller to deal with timeout (#49449)"
This reverts commit 63279823a7.
Flawed on many levels
* Adds poor API to a public function
* Papers over the fact that the public function is doing something bad
by catching exceptions it cannot handle in the first place
* Papers over the real cause of the issue which is a bug in the timeout
decorator
* Doesn't reraise properly
* Catches the wrong exception
Fixes#49824Fixes#49817
* Make the timeout decorator properly raise an exception outside of the function's scope
signal handlers which raise exceptions will never work well because the
exception can be raised anywhere in the called code. This leads to
exception race conditions where the exceptions could end up being
hanlded by unintended pieces of the called code.
The timeout decorator was using just that idiom. It was especially bad
because the decorator syntactically occurs outside of the called code
but because of the signal handler, the exception was being raised inside
of the called code.
This change uses a thread instead of a signal to manage the timeout in
parallel to the execution of the decorated function. Since raising of
the exception happens inside of the decorator, now, instead of inside of
a signal handler, the timeout exception is raised from outside of the
called code as expected which makes reasoning about where exceptions are
to be expected intuitive again.
Fixes#43884
* Add a common case test.
Adding an integration test driven from our unittests. Most of the time
we'll timeout in run_command which is running things in a subprocess.
Create a test for that specific case in case anything funky comes up
between threading and execve.
* Don't use OSError-based TimeoutError as a base class
Unlike most standard exceptions, OSError has a specific parameter list
with specific meanings. Instead follow the example of other stdlib
functions, concurrent.futures and multiprocessing and define a separate
TimeoutException.
* Add comment and docstring to point out that this is not hte Python3 TimeoutError
* Fix example in ini.py
* Fix unittest in test_ini.py to pass CI as latest ansible returns list in
different order. To prevent such issues in future results are sorted
* PEP8 E501 styling improvements
Co-Authored-By: Sergii Golovatiuk <sgolovat@redhat.com>
* Allow tags to be templated from a variable. Fixes#49825
* Restore _load_tags to ensure we do csv tag splitting
* Add tests for csv tags and templated tags
* evaluate_tags doesn't need to accept strings, because _load_tags handles this
Since the 'platform.dist()' and 'platform.linux_distribution()'
methods will be removed from future versions of python, this
provides an alternative to replace ansibles use of those
methods.
lib/ansible/module_utils/distro.py is a copy of
https://github.com/nir0s/distro/blob/master/distro.py
This module is originally from https://github.com/nir0s/distro
and is license under the Apache License, Version 2.0.
* In some cases, it appears that Exception should have been used instead
as there's no need to catch sys.exit KeyboardInterrupt and similar.
* In a few cases, it appears that BaseException is used because
a library we depend on calls sys.exit() contrary to good coding
design. Comment those so that we know that those have been audited
and found to be correct and change to use (Exception, SystemExit)
instead.
This work enables to add sit tunnel via nmcli module
Signed-off-by: Susant Sahani susant@redhat.com
SUMMARY
ISSUE TYPE
Feature Pull Request
COMPONENT NAME
nmcli
ANSIBLE VERSION
2.8
ADDITIONAL INFORMATION
- nmcli:
state: present
type: sit
conn_name: sit_test1
autoconnect: yes
ip_tunnel_dev: enp0s8
ip_tunnel_local: 192.168.1.2
ip_tunnel_remote: 192.168.1.5
- Require username and password for unregistering and avoid "cannot marshal None unless allow_none is enabled" error when using an activation key and no channels specified.
- Update test fixtures and add changelog
Co-authored-by: WhyIsThisOpen <WhyIsThisOpen@users.noreply.github.com>
* Pluribus Networks pn access list ip module with unit test cases
* Changes according to ansibot standards in unit test modules
* Remove unwanted variables
* Removed unwanted super call
* set ansible_os_family from name variable in os-release for clearlinux system
Signed-off-by: Josue David Hernandez Gutierrez <josue.d.hernandez.gutierrez@intel.com>
* Add os_family for clear linux and clear linux mixes
Signed-off-by: Josue David Hernandez Gutierrez <josue.d.hernandez.gutierrez@intel.com>
* Consolidate handler tracking
- Remove unused code. ci_complete
- unit test fixes. ci_complete
- Restore previous behavior of matching a single handler
- when notifying a host for a handler, return True if it was added, False otherwise, to reduce copied logic
- rename funcitons for clarity. ci_complete
- Remove handler logic for static includes which was disabled previously
* Simplify permission changing code for rabbitmq_user module
* Add check for multiple permission dicts for same host to rabbitmq_user module
* Add docstring for _get_permission method of rabbitmq_user
* Fix method that compares vhost permissions in rabbitmq_user
* Add tests for rabbitmq_user module
* Add helper function for simulating collections.Counter functionality
* Fix for changes in clearlinux
clearlinux is now providing /etc/os-release file and ansible is identifying as NA
then this change allow ansible to find it
Signed-off-by: Josue David Hernandez Gutierrez <josue.d.hernandez.gutierrez@intel.com>
* Add changelog fragment for clearlinux changes
Signed-off-by: Josue David Hernandez Gutierrez <josue.d.hernandez.gutierrez@intel.com>
* Add error message for k=v and YAML in a single task
Find the correct line, column, and position for k=v errors since they are different than the position reported initially.
Document bug in quoting syntax check.
* Change tense or error message
Since the error still exists, switch to present tense rather than past tense.
* Remove double spaces after periods in error messages.
http://www.slate.com/articles/technology/technology/2011/01/space_invaders.html
* Add changelog fragment
* Add tests for new error message
* Fix tests
* Add clarifying comments to unit test
* VMware: Fix module usages in module_utils
* Skip test for Python 2.6 as SSL context is not available in Python 2.6
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* add redshift_cross_region_snapshots module, unit tests.
* fix errors
* use ec2_argument_spec as the basis for the argument spec. fixed
metadata_version
* follow best practices by naming example tasks.
* code review changes
* fix linting errors
* Update version added
* add new options for na_ontap_aggregate
* add gpl line
* remove dup option
* Put files in wrong directory
* change unit test to match the request from PR 48941
* Changed for review comments
* pep8
* templar: ensure that exceptions are handled
* Fix AttributeError: object has no attribute 'message'
'message' attribute is deprecated since Python 2.6 and not available
with Python 3.
Simple reproducer:
- hosts: localhost
vars:
not_json: "{{ 'test str' | from_json }}"
tasks:
- command: "echo {{ not_json }}"
* test for openstack inventory constructed functionality
this adds unit tests for the compose, groups, and keyed_var features
of the openstack inventory plugin
* fix constructed functionality in openstack inventory plugin
The compose, groups, and keyed_groups functionality of the openstack
inventory plugin was broken:
- the plugin was not passing the correct variables to the
Constructable methods for compose and groups
- the plugin was simply never calling the appropriate method for
implementing keyed_groups
This commit fixes both issues.
* Initial Commit
* Initial Commit
* Initial Commit
* Fixing syntax errors
* After running sanity tests, fixed pylint and pep8 errors
* After running sanity tests, fixed pylint and pep8 errors
* Fixing more syntax issues
* Fixing more syntax issues
* Adding username to doc block
* PR candidate
* PR candidate
* fixed pep8 and docs issues
* fixed 2.6 function issues
* fixed 2.6 function issues part duex
* Initial commit for security profile group module
* Adding better playbook example to module
* Adding another commit to test shippable tests
* Fixing shippable errors, pep8 in unit test file and doc block problem in main module
* Fixing documentation module error
* Fixing pep8 line too long in unit test
* Fixing utility function with nested dictionaries
* Fixing utility function with pep8 issue
* Adding change to allow for multiple list of dictionaries to be submitted via a single playbook
* Fixing review changes
* Adding @ in author names per @Gundalow's request per Ansible's guidelines
* Initial Commit
* Initial Commit
* Initial Commit
* Fixing syntax errors
* After running sanity tests, fixed pylint and pep8 errors
* After running sanity tests, fixed pylint and pep8 errors
* Fixing more syntax issues
* Fixing more syntax issues
* Adding username to doc block
* PR candidate
* PR candidate
* fixed pep8 and docs issues
* fixed 2.6 function issues
* fixed 2.6 function issues part duex
* Initial commit for security profile group module
* Adding better playbook example to module
* Initial commit for FMG DNS security profile
* Fixing pep8 line too long in unit test
* Removing excess modules and unit tests
* Fixing trailing white space for dns module
* Fixing utility function with nested dictionaries
* Fixing utility function with pep8 issue
* Adding change to allow for multiple list of dictionaries to be submitted via a single playbook
* Fixing review changes
* Adding @ in author names per @Gundalow's request per Ansible's guidelines
* Needs unit test fix -- the "delete" calls a GET command and another function to get policy ID of a firewall policy before deleting it. Nested functions like this, where a GET occurs to determine a new call, breaks the unitTestGen output. Need to figure out what's going on, and adjust the generator.
* PR Candidate
* PR Candidate (fixes)
* Reverting
* Fixing Edits.
* Fixing Authors - Fixing Requested Changes
* Initial Commit
* Initial Commit
* Initial Commit
* Fixing syntax errors
* After running sanity tests, fixed pylint and pep8 errors
* After running sanity tests, fixed pylint and pep8 errors
* Fixing more syntax issues
* Fixing more syntax issues
* Adding username to doc block
* PR candidate
* PR candidate
* fixed pep8 and docs issues
* fixed 2.6 function issues
* fixed 2.6 function issues part duex
* Initial commit for security profile group module
* Adding better playbook example to module
* Adding another commit to test shippable tests
* Fixing shippable errors, pep8 in unit test file and doc block problem in main module
* Fixing documentation module error
* Fixing pep8 line too long in unit test
* Fixing utility function with nested dictionaries
* Fixing utility function with pep8 issue
* Adding change to allow for multiple list of dictionaries to be submitted via a single playbook
* Initial commit for FMG Security Profile Web Application Firewall
* adding extra line at bottom for pep8 conditions
* Adding descriptions to documentation
* Fixing more pep8 issues
* New commit for new PR
* Removing todo in documentation
* Changing module name in documentation to match actual module name
* Fixing yaml syntax for long choices list
* Fixing yaml syntax for long choices list
* Fixing review changes
* Adding @ in author names per @Gundalow's request per Ansible's guidelines
* Initial Commit
* Initial Commit
* Initial Commit
* Fixing syntax errors
* After running sanity tests, fixed pylint and pep8 errors
* After running sanity tests, fixed pylint and pep8 errors
* Fixing more syntax issues
* Fixing more syntax issues
* Adding username to doc block
* PR candidate
* PR candidate
* fixed pep8 and docs issues
* fixed 2.6 function issues
* fixed 2.6 function issues part duex
* Initial commit for security profile group module
* Adding better playbook example to module
* Adding another commit to test shippable tests
* Fixing shippable errors, pep8 in unit test file and doc block problem in main module
* Fixing documentation module error
* Fixing pep8 line too long in unit test
* Fixing utility function with nested dictionaries
* Fixing utility function with pep8 issue
* Adding change to allow for multiple list of dictionaries to be submitted via a single playbook
* Initial commit for FMG Security Profile Web Application Firewall
* adding extra line at bottom for pep8 conditions
* Adding descriptions to documentation
* Fixing more pep8 issues
* New commit for new PR
* Removing todo in documentation
* Changing module name in documentation to match actual module name
* Fixing yaml syntax for long choices list
* Fixing yaml syntax for long choices list
* Initial commit for fmgr web filter security profile
* Fixing pep8 syntax issues
* Fixing documentation yaml syntax errors with choices on new lines
* Fixing documentation yaml syntax errors, removing Todo comments
* Fixing choices additional tab
* Fixing choices on multiple lines
* Fixing choices on multiple lines
* Adding yaml block scalar for multiline choices
* Changing YAML syntax for multiline to YAML sequence for choices
* Fixing all sanity test errors
* Fixing review changes
* Adding @ in author names per @Gundalow's request per Ansible's guidelines
* Initial Commit
* Initial Commit
* Initial Commit
* Fixing syntax errors
* After running sanity tests, fixed pylint and pep8 errors
* After running sanity tests, fixed pylint and pep8 errors
* Fixing more syntax issues
* Fixing more syntax issues
* Adding username to doc block
* PR candidate
* PR candidate
* fixed pep8 and docs issues
* fixed 2.6 function issues
* fixed 2.6 function issues part duex
* Initial commit for security profile group module
* Adding better playbook example to module
* Adding another commit to test shippable tests
* Fixing shippable errors, pep8 in unit test file and doc block problem in main module
* Fixing documentation module error
* Fixing pep8 line too long in unit test
* Fixing utility function with nested dictionaries
* Fixing utility function with pep8 issue
* Adding change to allow for multiple list of dictionaries to be submitted via a single playbook
* Initial commit for FMG Security Profile Web Application Firewall
* adding extra line at bottom for pep8 conditions
* Adding descriptions to documentation
* Fixing more pep8 issues
* New commit for new PR
* Removing todo in documentation
* Changing module name in documentation to match actual module name
* Fixing yaml syntax for long choices list
* Fixing yaml syntax for long choices list
* Initial commit for fmgr web filter security profile
* Initial commit for SSL and SSH security profiles in FMG
* Fixing pep8 syntax issues
* Adding better playbook example
* Fixing review changes
* Adding @ in author names per @Gundalow's request per Ansible's guidelines
* FTD modules: bug fixes and upsert functionality
* Fix sanity checks
* Fix unit tests for Python 2.6
* Log status code for login/logout
* Use string formatting in logging
This will allow tests to be carried out condtionally if necessary
using regexp include and/or exclude filters
Reorganize imports into alphabetical order for easier insertion
* win_update: Add post search category matching to support product matching
* win_updates: Return categories of each update
* win_updates: Documentation fix-up
* win_updates: Adjusted documentation to reflect regex vs sub-string match of post-cat strings
* win_updates: Sped up post-category checking
* win_updates: Updated documentation to suggest querying post-category strings
* win_updates: Simplified saving and checking post-categories
* fixed some issues and added filtered categories to return value
* win_updates: Moved all category matching to occur after initial search
* win_updates: Adjustments to satisfy PowerShell lint checks
* win_updates: Dropped category validation from action plugin
* win_updates: Documentation updates
* win_updates: Fixed plugin unit tests
* yum also parse obsolete package output
This is a rebase of the patch originally proposed in
https://github.com/ansible/ansible/pull/40001 by machacekondra
Fixes#39978
Signed-off-by: Adam Miller <admiller@redhat.com>
* properly parse the obsoletes, provide a new output entry, add changelog
Signed-off-by: Adam Miller <admiller@redhat.com>
* make pep8 happy
Signed-off-by: Adam Miller <admiller@redhat.com>
* remove q debugging output
Signed-off-by: Adam Miller <admiller@redhat.com>
* More generic comparison code from docker_container to docker_common.
* More flexibility if a is None and method is allow_to_present.
Note that this odes not affect docker_container, as there a is never None.
* Update docker_secret and docker_config: simplify labels comparison.
* Added unit tests.
* Use proper subsequence test for allow_more_present for lists.
Note that this does not affect existing code in docker_container, since lists
don't use allow_more_present. Using allow_more_present will only be possible
in Ansible 2.8.
* pep8
This reverts commit c649d0ea32.
The change results in deadlock in network_cli while it is
waiting to check the return value of recv_ready() which
was added in this commit to improve performance
* Fix prompt mismatch issue for ios
Fixes#40884#44463
* If the command prompt is matched check if data is
still pending to be read from buffer.
* This fix adds a new timer `buffer_read_timeout`
which will be trigerred after command prompt
is matched and data is attempted to be read from channel.
If not data is present of channel the timer will expire
and response we be returned to calling function.
* Fix unit test failure
* Update to make buffer timeout float
* Update doc and fix review comment
* Fix CI issues
* Update doc
* Fix review comments
* Fix review comments
* Adding iam_password_policy module
* fixing various issues -- error handling, bugs
* fixing various issues based on tests
* renaming dummy var
* fixing type reference in documentation
* adding int tests and other updates
* removing typo
* fixing auth for int tests
* removing int tests for now
* readding integration tests w/ unsupported designation
* removing conflicting group
* Update aliases
* Fix unused variable
* Add support for IOS vlan parsing filter.
Example usage below:
{% set parsed_vlans = vlans | vlan_parser %}
switchport trunk allowed vlan {{ parsed_vlans[0] }}
{% for i in range (1, parsed_vlans | count) %}
switchport trunk allowed vlan add {{ parsed_vlans[i] }}
* Update test_network.py
Add import statement for filter
* Fixed PEP8 issues relating to comments
* Fix PEP8 issues related to blank lines
* Removed magic numbers for line lengths. This should generalize support
to other IOS-like NOS that use similar methods for listing vlans. The
default arguments for line lengths will still be specific to Cisco IOS.
The unit tests for line length are still specific to Cisco IOS.
* Move ansible.compat.tests to test/units/compat/.
* Fix unit test references to ansible.compat.tests.
* Move builtins compat to separate file.
* Fix classification of test/units/compat/ dir.
* Separate networking tools that may be used by modules outside of networking so changes to networking-only utilities don't trigger AWS integration tests
* Add unit tests for moved network utils
* Add comment to prevent imports from being mistakenly removed
* Move to_bits as well
* allow jinja2 unique filter compat
* detect if unique is provided, fallback with warning
* handle j2 specific params
* now all filters using unique must pass environment
* added env to tests
also normalized on how we normally import and use exceptoins
* Unify login behavior between 1Password lookup plugins and module
- Use the same names for all credential aspects
- Only require the minimal amount of information for each
- Add more examples
* Change parameter terms
- use terms in line with 1Password documentation.
- update examples
- update tests
* Improve error messages in lookup plugin
* Unify onepassword_facts with lookup plugins
- use same methods and logic for signing in or reusing existing session
- unify terms with lookup plugins
* Change rc test for determing login
An rc other than 1 can be returned when a current login session does not exist.
* Create AnsibleModuleError class
ansible.errors is not available to modules, so create an AnsibleModuleError class within the module
Do not user os.path.expanduser since this is already done by virtue of the type being "path" in the argument spec.
* Add note about risk with fact caching sensitive data
* Add note on op version that was used for testing
* Ensure that the src file contents is converted to unicode in diff info. Fixes#45717
* Fix up and cleanup
* The diff functionality in the callback plugins should have the
to_text() calls removed since we're now doing it in ActionBase
* catching of UnicodeError and warnings in the callback diff
functionality from 61d01f549f haven't been
needed since we switched to to_text so remove them.
* Add a note to ActionBase's diff function giving an example of when the
diff function will be inaccurate and how to fix it
* Fix callback get_diff() tests
I believe the unittests of callback's get_diff() were wrong. They were
sending in a list where strings were expected. Because previous code
was transforming the lists into strings via their repr, the previous
tests did not fail but they would have formatted the test cases output
in an odd way if we had looked at it.
* Try to intuit proper plugins to send to ansible-connection
* Move sub-plugins to init so that vars will be populated in executor
* Fix connection unit tests
* Fix CNOS unit test log usage.
* Use temp dir for Galaxy unit tests.
* Write to temp files in interfaces_file unit test.
* Fix log placement in netapp_e_ldap unit test.
* Link to the Galaxy platforms list from the meta file template
Fixes https://github.com/ansible/galaxy/issues/52.
* make ansible/ansible text match mazer text on platforms
* Return correct version on installed VyOS
Previously existing regexp will shows only "VyOS" without numeric output of router version.
For example: from "Version: VyOS 1.1.6" only VyOS will be written in ansible_net_version variable
For more informative output numeric value should be returned as well
* Fixed unittests
* To change all CLIs present in the code to latest CNOS CLI. One bug of executing with Lenovo Jakku switch is also getting fixed.
* To change the file names as the commands have changed from display to show
* To change to new CLI in test_cnos_comand.py as well
On all supported Pythons, the io.BytesIO is always a stream
implementation using an in-memory bytes buffer. Makes code slightly more
forward compatible by reducing use of the six module.
* Add check in network_cli to handle all prompts
* Add check_all flag to mandatory handle all the command prompt
in prompts list. By default if any one prompt is handled
remaining prompts are ignored.
* Fix cli_command multiple prompt issue
* If multiple prompt and answers are given as input network_cli
handles only the first prompt that matched by default
* If a command execution results in muliple prompt the fix
add support to set a boolean option C(check_all) to indicate
network_cli to wait till all the prompts and answers are processed.
* Update cli_command
* Update api doc
* Fix unit test failure
* Fix CI failure
* Update network_cli
* Fix review comment
* Fix iosxr cli_config module diff issue
* Modify iosxr plugin to support configuration
diff capability (get_diff()) within Ansible
to be in sync with iosxr_config module.
* Fix unit test case failure
* Add common and Swagger client utils for FTD modules
* Update FTD HTTP API plugin and add unit tests for it
* Add configuration layer handling object idempotency
* Add ftd_configuration module with unit tests
* Add ftd_file_download and ftd_file_upload modules with unit tests
* Validate operation data and parameters
* Fix ansible-doc, boilerplate and import errors
* Fix pip8 sanity errors
* Update object comparison to work recursively
* Add copyright
* Define netapp_e_mgmt_interface storage module.
The netapp_e_mgmt_interface module provides management configuration for
e-series storage array interface points including remote ssh access, NTP
and DNS services.
This patch also includes integration and unit tests.
* Fix netapp_e_mgmt_interface ssh option documentation and name/channel exclusivity.
Email alerts can be enabled for an E-Series system to provide
information to interested users by email when a warning or critical
level event occurs on the system. This module will allow a system owner
to configure whether or not system alerts are enabled, and who will
receive them.
* New module for NTAP E-Series iSCSI Interfaces
Define a new module for configuring NetApp E-Series iSCSI interfaces.
* Improve netapp_e_iscsi_interface integration tests
Restructured integration test to set all iscsi ports to disabled, then
defines the ports either statically or with dhcp, next updates the ports
with the other definition type (static <-> dhcp), and lastly disables
all ports. Each netapp_eseries_iscsi_interface call is verified with the
array.
* Define NetApp E-Series ASUP module
ASUP, or Auto-Support, is a mechanism that allows NetApp support
to receive information on the status of E-Series storage-systems
in order to proactively resolve issues for customers. This module
gives customers the ability to tune ASUP settings to their liking,
including disabling the feature entirely.
* Improved testing for netapp_e_asup module
Added coverage and validation to asup integration and unit testing
There are multiple settings that are defined at a global level for
E-Series systems, but don't necessarily fit with anything else. This
module is intended to provide a place to encapsulate those.
* Share the implementation of hashing for both vars_prompt and password_hash.
* vars_prompt with encrypt does not require passlib for the algorithms
supported by crypt.
* Additional checks ensure that there is always a result.
This works around issues in the crypt.crypt python function that returns
None for algorithms it does not know.
Some modules (like user module) interprets None as no password at all,
which is misleading.
* The password_hash filter supports all parameters of passlib.
This allows users to provide a rounds parameter, fixing #15326.
* password_hash is not restricted to the subset provided by crypt.crypt,
fixing one half of #17266.
* Updated documentation fixes other half of #17266.
* password_hash does not hard-code the salt-length, which fixes bcrypt
in connection with passlib.
bcrypt requires a salt with length 22, which fixes#25347
* Salts are only generated by ansible when using crypt.crypt.
Otherwise passlib generates them.
* Avoids deprecated functionality of passlib with newer library versions.
* When no rounds are specified for sha256/sha256_crypt and sha512/sha512_crypt
always uses the default values used by crypt, i.e. 5000 rounds.
Before when installed passlibs' defaults were used.
passlib changes its defaults with newer library versions, leading to non
idempotent behavior.
NOTE: This will lead to the recalculation of existing hashes generated
with passlib and without a rounds parameter.
Yet henceforth the hashes will remain the same.
No matter the installed passlib version.
Making these hashes idempotent.
Fixes#15326Fixes#17266Fixes#25347 except bcrypt still uses 2a, instead of the suggested 2b.
* random_salt is solely handled by encrypt.py.
There is no _random_salt function there anymore.
Also the test moved to test_encrypt.py.
* Uses pytest.skip when passlib is not available, instead of a silent return.
* More checks are executed when passlib is not available.
* Moves tests that require passlib into their own test-function.
* Uses the six library to reraise the exception.
* Fixes integration test.
When no rounds are provided the defaults of crypt are used.
In that case the rounds are not part of the resulting MCF output.
* Resolve issues in NetApp E-Series Host module
The E-Series host module had some bugs relating to the update/creation
of host definitions when iSCSI initiators when included in the
configuration. This patch resolves this and other minor issues with
correctly detecting updates.
There were also several minor issues found that were causing issues with
truly idepotent updates/changes to the host definition.
This patch also provides some unit tests and integration tests to help
catch future issues in these areas.
fixes#28272
* Improve NetApp E-Series Host module testing
The NetApp E-Series Host module integration test lacked feature test
verification to verify the changes made to the storage array.
The NetApp E-Series rest api was used to verify host create, update, and
remove changes made to the NetApp E-Series storage arrays.
* issue:43021 add support for onyx version 3.6.6000
Signed-off-by: Samer Deeb <samerd@mellanox.com>
* issue:43021 add support for onyx version 3.6.6000
Signed-off-by: Samer Deeb <samerd@mellanox.com>
when using only an activation key without any channels.
As already suggested by mattclay in
https://github.com/ansible/ansible/pull/25079
and also patch unit test for rhn_register and
add test case for activationkey only
Portions of the f5-sdk were removed as well as the netaddr library
and were replaced with libraries that are part of ansible. Additionally,
deprecated code has been removed.
* Don't use copy.deepcopy in high workload areas, use deepishcopy. ci_complete
* Add tests
* Add changelog fragment
* rename to naive_deepcopy and add extra docs
* Rename to module_response_deepcopy and move to vars/clean
* Refactor yum and dnf, add feature parity
Signed-off-by: Adam Miller <admiller@redhat.com>
* remove unnecessary module_utils, move the classes into the module code
Signed-off-by: Adam Miller <admiller@redhat.com>
* remove yum -> yum4, out of scope
Signed-off-by: Adam Miller <admiller@redhat.com>
* use ABCMeta
Signed-off-by: Adam Miller <admiller@redhat.com>
* re-arrange run() caller vs callee
Signed-off-by: Adam Miller <admiller@redhat.com>
* make sanity checks happy
Signed-off-by: Adam Miller <admiller@redhat.com>
* fix yum unit tests
Signed-off-by: Adam Miller <admiller@redhat.com>
* remove unecessary debug statements, fix typo
Signed-off-by: Adam Miller <admiller@redhat.com>
* fix licensing and attribution in yumdnf module_util
Signed-off-by: Adam Miller <admiller@redhat.com>
* include fix from PR 40737
original commit 5cbda9658a
original Author: Strahinja Kustudic <kustodian@gmail.com>
yum will fail on 'No space left on device', fixes#32791 (#40737)
During the installing of packages if yum runs out of free disk space,
some post install scripts could fail (like e.g. when the kernel
package generates initramfs), but yum would still exit with a status
0. This is bad, especially for the kernel package, because it makes
it unable to boot. Because the yum module is usually used for
automation, which means the users cannot read every message yum
prints, it's better that the yum module fails if it detects that
there is no free space on the disk.
Signed-off-by: Adam Miller <admiller@redhat.com>
* Revert "fix licensing and attribution in yumdnf module_util"
This reverts commit 59e11de5a2a6efa17ac3f0076bb162348c02e1bd.
* move fetch_rpm_from_url out of yumdnf module_util
Signed-off-by: Adam Miller <admiller@redhat.com>
* fix the move of fetch_rpm_from_url
Signed-off-by: Adam Miller <admiller@redhat.com>
- support config operations for EXOS-based platforms
- add regex to detect command failure responses
- add exos action plugin for "backup" operation
- add unit tests for exos_command (currently 94% coverage of
exos_config.py)
NOTE:
1. use os.open() with os.O_CREAT|os.O_EXCL to check existence
and create a lock file if not exists, it's an atomic operation
2. the fastest process will create the lock file and others will
wait until the lock file is removed
3. after the writer finished writing to the password file, all the reading
operations use built-in open so processes can read the file parallel
* Remove use of simplejson throughout code base. Fixes#42761
* Address failing tests
* Remove simplejson from contrib and other outlying files
* Add changelog fragment for simplejson removal
Add exos_facts module. Known limitations at this time include:
- Interface MTU is not reported.
- Only primary interface IP is reported.
Add basic unit tests for the exos_facts module.
An EXOS CLI prompt can be prefixed with '! ' (shutting down), '* '
(running configuration does not match saved configuration), and
can include various status tokens within parentheses after these
prefixes. Update prompt regex to accept valid CLI prompts.
