* Fixed Retrieving All IPv4 Addresses on L3 Interfaces
The ios_facts module retrieving the interface subnet, would only get the primary IPv4 address on the interface and would not capture all the secondary IPs (ones that I would be set by "ip address x.x.x.x x.x.x.x secondary").
This was tested and confirmed to work on a Cisco 6500 with IOS 15.1(2)SY6.
* Fixed whitespace and if statement issues for sanity.
* Fixed spacing because sanity.
* Add 2.0-2.3 facts api compat (ansible_facts(), get_all_facts())
These are intended to provide compatibilty for modules that
use 'ansible.module_utils.facts.ansible_facts' and
'ansible.module_utils.facts.get_all_facts' from 2.0-2.3 facts
API.
Fixes#25686
Some related changes/fixes needed to provide the compat api:
* rm ansible.constants import from module_utils.facts.compat
Just use a hard coded default for gather_subset/gather_timeout
instead of trying to load it from non existent config if the
module params dont include it.
* include 'external' collectors in compat ansible_facts()
* Add facter/ohai back to the valid collector classes
facter/ohai had gotten removed from the default_collectors
class used as the default list for all_collector_classes by
setup.py and compat.py
That made gather_subset['facter'] fail.
* Add aggregate parameter validation
aggregate parameter validation will support checking each individual dict
to resolve conditions for aliases, no_log, mutually_exclusive,
required, type check, values, required_together, required_one_of
and required_if conditions in argspec. It will also set default values.
eg:
tasks:
- name: Configure interface attribute with aggregate
net_interface:
aggregate:
- {name: ge-0/0/1, description: test-interface-1, duplex: full, state: present}
- {name: ge-0/0/2, description: test-interface-2, active: False}
register: response
purge: Yes
Usage:
```
from ansible.module_utils.network_common import AggregateCollection
transform = AggregateCollection(module)
param = transform(module.params.get('aggregate'))
```
Aggregate allows supports for `purge` parameter, it will instruct the module
to remove resources from remote device that hasn’t been explicitly
defined in aggregate. This is not supported by with_* iterators
Also, it improves performace as compared to with_* iterator for network device
that has seperate candidate and running datastore.
For with_* iteration the sequence of operartion is
load-config-1 (candidate db) -> commit (running db) -> load_config-2
(candidate db) -> commit (running db) ...
With aggregate the sequence of operation is
load-config-1 (candidate db) -> load-config-2 (candidate db) -> commit
(running db)
As commit is executed only once per task for aggregate it has
huge perfomance benefit for large configurations.
* Fix CI issues
* Fix review comments
* Add support for options validation for aliases, no_log,
mutually_exclusive, required, type check, value check,
required_together, required_one_of and required_if
conditions in sub-argspec.
* Add unit test for options in argspec.
* Reverted aggregate implementaion.
* Minor change
* Add multi-level argspec support
* Multi-level argspec support with module's top most
conditionals options.
* Fix unit test failure
* Add parent context in errors for sub options
* Resolve merge conflict
* Fix CI issue
* Make camel_to_snake work on capitalized plurals
`TargetGroupARNs` should become `target_group_arns`, not
`target_group_ar_ns`
Promote `camel_to_snake` to top layer function but prefix
it with an underscore.
Add tests for improved `_camel_to_snake` function.
Reduce use of `re.compile` as it makes no sense when the
compilation result is not reused.
* Remove unused LooseVersion check
* Fix PLURALs case for camel_to_snake
Also renamed EXPECTED_CAMELIZATION to EXPECTED_SNAKIFICATION
* iosxr implemetation for net_interface
* iosxr_interface implementation
* Add integration test
* iosxr_interface integration test
* net_interface intergration test for iosxr
* update boilerplate
* Added priority attribute for pool members (bigip_pool_member module)
* Line break missing
* Change from 'priority' to 'priority_group'
* Update bigip_pool_member.py
* Update bigip_pool_member.py
Currently socket path is send from `ansible-connection` (running as background
process) over stdout. This can conflict with debug logs that are also send on
stdout resulting in incorrect socket path received by the main process.
To avoid this add a socket path delimiter string which is recevied by
main process and socket path is retrieved based on delimiter string.
This implementation will change in future when ansible-connection
framework is made more robust.
* Add new notification module: BearyChat integration
BearyChat (https://bearychat.com) is a Slack alternative service.
* Remove implicit args and change position of module.fail
* Update the metadata of bearychat module
* Add tests for group in a VPC
* Improve ec2_group output and documentation
Update ec2_group to provide full security group information
Add RETURN documentation to match
* Fix ec2_group creation within a VPC
Ensure VPC ID gets passed when creating security group
* Add test for auto creating SG
* Fix ec2_group auto group creation
* Add backoff to describe_security_groups
Getting LimitExceeded from describe_security_groups is definitely
possible (source: me) so add backoff to increase likelihood of
success.
To ensure that all `describe_security_group` calls are backed off,
remove implicit ones that use `ec2.SecurityGroup`. From there,
the decision to remove the `ec2` boto3 resource and rely on the client
alone makes good sense.
* Tidy up auto created security group
Add resource_prefix to auto created security group and delete
it in the `always` section.
Use YAML argument form for all module parameters
* win_service: added support for paused services
* change pausable service for local computers
* more fixes for older hosts
* sigh
* skip pause tests for Server 2008 as it relies on the service
* Add reference to VNET resource group
When creating a new virtual machine, added new parameter to allow creation of VM in a resource group using virtual network from another resource group
* Fixed white space errors
Was getting compialtion errors with code and just went around and cleaned up extra white spaces and such.
* Re-fixed more white space issues
* Fixed Version Number for new parameter
* specified exceptions
Use clouderror instead of exceptions for finidng virtual network
* Simplified code lines
created a local variable to either use the VNET resource group or the VM resource group and then used whichever was available as a parameter
* fixed syntax issue with newline
...hopefully
* removed superfluous default/required from docs
* fix vm_size default
Archive.py allows you to pass a glob path of files to archive.
This allows end users to glob a dir, and exlude a list of dirs
from the archive which are not necessary.
* initial commit for win_group_member module
* fix variable name change for split_adspath
* correct ordering of examples/return data to match documentation verbiage
* change tests setup/teardown to use new group rather than an inbult group
* New Module: Manage Avi Networks AlertScriptConfig (network/avi/avi_alertscriptconfig)
* updated example to not include python import as it fails sanity test
* ACI module_utils library for ACI modules
This PR includes:
- the ACI argument_spec
- an aci_login function
- an experimental aci_request function
- an aci_response function
- included the ACI team
* New prototype using ACIModule
This PR includes:
- A new ACIModule object with various useful methods
Made the following changes:
* Removed wildcard imports
* Replaced long form of GPL header with short form
* Removed get_exception usage
* Added from __future__ boilerplate
* Adjust division operator to // where necessary
For the following files:
* web_infrastructure modules
* system modules
* linode, lxc, lxd, atomic, cloudscale, dimensiondata, ovh, packet,
profitbricks, pubnub, smartos, softlayer, univention modules
* compat dirs (disabled as its used intentionally)
Absolute path trailing slash handling in absolute directories
find_needle() isn't passing a trailing slash through verbatim. Since
copy uses that to determine if it should copy a directory or just the
files inside of it, we have to detect that and restore it after calling
find_needle()
Fixes#27439
* add_hosts.py: Fix add_host does not recognise 'host' alias
* add_hosts.py: add note in documentation that 'hosts' alias of name parameter is only available on >=2.4
Fixes#13243
** Add --vault-id to name/identify multiple vault passwords
Use --vault-id to indicate id and path/type
--vault-id=prompt # prompt for default vault id password
--vault-id=myorg@prompt # prompt for a vault_id named 'myorg'
--vault-id=a_password_file # load ./a_password_file for default id
--vault-id=myorg@a_password_file # load file for 'myorg' vault id
vault_id's are created implicitly for existing --vault-password-file
and --ask-vault-pass options.
Vault ids are just for UX purposes and bookkeeping. Only the vault
payload and the password bytestring is needed to decrypt a
vault blob.
Replace passing password around everywhere with
a VaultSecrets object.
If we specify a vault_id, mention that in password prompts
Specifying multiple -vault-password-files will
now try each until one works
** Rev vault format in a backwards compatible way
The 1.2 vault format adds the vault_id to the header line
of the vault text. This is backwards compatible with older
versions of ansible. Old versions will just ignore it and
treat it as the default (and only) vault id.
Note: only 2.4+ supports multiple vault passwords, so while
earlier ansible versions can read the vault-1.2 format, it
does not make them magically support multiple vault passwords.
use 1.1 format for 'default' vault_id
Vaulted items that need to include a vault_id will be
written in 1.2 format.
If we set a new DEFAULT_VAULT_IDENTITY, then the default will
use version 1.2
vault will only use a vault_id if one is specified. So if none
is specified and C.DEFAULT_VAULT_IDENTITY is 'default'
we use the old format.
** Changes/refactors needed to implement multiple vault passwords
raise exceptions on decrypt fail, check vault id early
split out parsing the vault plaintext envelope (with the
sha/original plaintext) to _split_plaintext_envelope()
some cli fixups for specifying multiple paths in
the unfrack_paths optparse callback
fix py3 dict.keys() 'dict_keys object is not indexable' error
pluralize cli.options.vault_password_file -> vault_password_files
pluralize cli.options.new_vault_password_file -> new_vault_password_files
pluralize cli.options.vault_id -> cli.options.vault_ids
** Add a config option (vault_id_match) to force vault id matching.
With 'vault_id_match=True' and an ansible
vault that provides a vault_id, then decryption will require
that a matching vault_id is required. (via
--vault-id=my_vault_id@password_file, for ex).
In other words, if the config option is true, then only
the vault secrets with matching vault ids are candidates for
decrypting a vault. If option is false (the default), then
all of the provided vault secrets will be selected.
If a user doesn't want all vault secrets to be tried to
decrypt any vault content, they can enable this option.
Note: The vault id used for the match is not encrypted or
cryptographically signed. It is just a label/id/nickname used
for referencing a specific vault secret.
* Fix fetch configuration in junos_command
Fixes#26358 Add support to fetch configuration
from device in `xml`, `text`, `json`, `set` display
format.
* Add error message if set display is not supported
* Throw error in case of warning for show commands
* AWS key management service fix; statement may not have a principal, and if there is only one AWS principal it will not be a list as expected. Fixes 25786.
* remove len(), only catch exception in function for json.dumps() failure
* use a defined variable and make formatting python 2.6 compatible
* Revert "Update conventions in azure modules"
This reverts commit 30a688d8d3.
* Revert "Allow specific __future__ imports in modules"
This reverts commit 3a2670e0fd.
* Revert "Fix wildcard import in galaxy/token.py"
This reverts commit 6456891053.
* Revert "Fix one name in module error due to rewritten VariableManager"
This reverts commit 87a192fe66.
* Revert "Disable pylint check for names existing in modules for test data"
This reverts commit 6ac683ca19.
* Revert "Allow ini plugin to load file using other encoding than utf8."
This reverts commit 6a57ad34c0.
- New option for ini plugins: encoding
- Add a new option encoding to _get_file_contents
- Use replace option in test/runner/lib/util.py when calling decode on stdout/err
output when diff have non-utf8 sequences
