This makes our recursive, ast.parse performance measures as fast as
pre-ziploader baseline.
Since this unittest isn't testing that the returned module data is
correct we don't need to worry about os.rename not having any module
data. Should devise a separate test for the module and caching code
* Ziploader proof of concept (jimi-c)
* Cleanups to proof of concept ziploader branch:
* python3 compatible base64 encoding
* zipfile compression (still need to enable toggling this off for
systems without zlib support in python)
* Allow non-wildcard imports (still need to make this recusrsive so that
we can have module_utils code that imports other module_utils code.)
* Better tracebacks: module filename is kept and module_utils directory
is kept so that tracebacks show the real filenames that the errors
appear in.
* Make sure we import modules that are used into the module_utils files that they are used in.
* Set ansible version in a more pythonic way for ziploader than we were doing in module replacer
* Make it possible to set the module compression as an inventory var
This may be necessary on systems where python has been compiled without
zlib compression.
* Refactoring of module_common code:
* module replacer only replaces values that make sense for that type of
file (example: don't attempt to replace python imports if we're in
a powershell module).
* Implement configurable shebang support for ziploader wrapper
* Implement client-side constants (for SELINUX_SPECIAL_FS and SYSLOG)
via environment variable.
* Remove strip_comments param as we're never going to use it (ruins line
numbering)
* Don't repeat ourselves about detecting REPLACER
* Add an easy way to debug
* Port test-module to the ziploader-aware modify_module()
* strip comments and blank lines from the wrapper so we send less over the wire.
* Comments cleanup
* Remember to output write the module line itself in powershell modules
* for line in lines strips the newlines so we have to add them back in
* Can be configured in the ansible.cfg for tasks/handlers individually
* If an included filename contains no vars or loops, it will be expanded
in-place as if it were marked as static
porting @dominis 's ansible-shell tool from 1.9 and integrating it into ansible
added verbosity control
made more resilitent to several errors
added highlight color, to configurable colors
more resilient on exception and interruptions
prompt coloring, goes red and changes to # when using become = true and root
become setting is now explicit and not a toggle
Pipelining is a *significant* performance benefit, because each task can
be completed with a single SSH connection (vs. one ssh connection at the
start to mkdir, plus one sftp and one ssh per task).
Pipelining is disabled by default in Ansible because it conflicts with
the use of sudo if 'Defaults requiretty' is set in /etc/sudoers (as it
is on Red Hat) and su (which always requires a tty).
We can (and already do) make sudo/su happy by using "ssh -t" to allocate
a tty, but then the python interpreter goes into interactive mode and is
unhappy with module source being written to its stdin, per the following
comment from connections/ssh.py:
# we can only use tty when we are not pipelining the modules.
# piping data into /usr/bin/python inside a tty automatically
# invokes the python interactive-mode but the modules are not
# compatible with the interactive-mode ("unexpected indent"
# mainly because of empty lines)
Instead of the (current) drastic solution of turning off pipelining when
we use a tty, we can instead use a tty but suppress the behaviour of the
Python interpreter to switch to interactive mode. The easiest way to do
this is to make its stdin *not* be a tty, e.g. with cat|python.
This works, but there's a problem: ssh will ignore -t if its input isn't
really a tty. So we could open a pseudo-tty and use that as ssh's stdin,
but if we then write Python source into it, it's all echoed back to us
(because we're a tty). So we have to use -tt to force tty allocation; in
that case, however, ssh puts the tty into "raw" mode (~ICANON), so there
is no good way for the process on the other end to detect EOF on stdin.
So if we do:
echo -e "print('hello world')\n"|ssh -tt someho.st "cat|python"
…it hangs forever, because cat keeps on reading input even after we've
closed our pipe into ssh's stdin. We can get around this by writing a
special __EOF__ marker after writing in_data, and doing this:
echo -e "print('hello world')\n__EOF__\n"|ssh -tt someho.st "sed -ne '/__EOF__/q' -e p|python"
This works fine, but in fact I use a clever python one-liner by mgedmin
to achieve the same effect without depending on sed (at the expense of a
much longer command line, alas; Python really isn't one-liner-friendly).
We also enable pipelining by default as a consequence.
The code isn't sophisticated enough to understand lists and dicts yet.
This mirrors how 1.9.x handled non-string items so its not a regression.
One portion of a fix for #12976
also remove condition to bypass setting user if user matches current user
this enables forcing user when set to the same user as current user and ignoring .ssh/config
while keeping .ssh/config with current user if nothing is specified.
The earlier code behaved exactly as though this default had been set,
but it was actually handled as a(n unnecessary) special case inside the
connection plugin, rather than set as an explicit default.
If the default is overriden either in ansible.cfg or the environment,
the new code will continue to work (in fact, it won't know or care,
since it just uses the value set in the PlayContext).
This is submitted as a separate commit for easier review to address
backwards-compatibility concerns.
* allow global no_log setting, no need to set at play or task level, but can be overriden by them
* allow turning off syslog only on task execution from target host (manage_syslog), overlaps with no_log functionality
* created log function for task modules to use, now we can remove all syslog references, will use systemd journal if present
* added debug flag to modules, so they can make it call new log function conditionally
* added debug logging in module's run_command
The event loop (even after it was brought into one place in _run in the
previous commit) was hard to follow. The states and transitions weren't
clear or documented, and the privilege escalation code was non-blocking
while the rest was blocking.
Now we have a state machine with four states: awaiting_prompt,
awaiting_escalation, ready_to_send (initial data), and awaiting_exit.
The actions in each state and the transitions between then are clearly
documented.
The check_incorrect_password() method no longer checks for empty strings
(since they will always match), and check_become_success() uses equality
rather than a substring match to avoid thinking an echoed command is an
indication of successful escalation. Also adds a check_missing_password
connection method to detect the error from sudo -n/doas -n.
This change is similar to https://github.com/ansible/ansible/pull/10465
It extends the logic there to also support none types. Right now if you have
a '!!null' in yaml, and that var gets passed around, it will get converted to
a string.
eg. defaults/main.yml
```
ENABLE_AWESOME_FEATURE: !!null # Yaml Null
OTHER_CONFIG:
secret1: "so_secret"
secret2: "even_more_secret"
CONFIG:
hostname: "some_hostname"
features:
awesame_feature: "{{ ENABLE_AWESOME_FEATURE}}"
secrets: "{{ OTHER_CONFIG }}"
```
If you output `CONFIG` to json or yaml, the feature flag would get represented in the output
as a string instead of as a null, but secrets would get represented as a dictionary. This is
a mis-match in behaviour where some "types" are retained and others are not. This change
should fix the issue.
I also updated the template test to test for this and made the changes to v2.
Added a changelog entry specifically for the change from empty string to null as the default.
Made the null representation configurable.
It still defaults to the python NoneType but can be overriden to be an emptystring by updating
the DEFAULT_NULL_REPRESENTATION config.
* enable batch mode (configurable with a config option, on by default)
for sftp transfers, so we can catch errors more easily
* general cleanup in the local connection plugin and fetch action plugin
Fixes#11612
This PR adds the option to retry failed ssh executions, if the failure
is caused by ssh itself, not the remote command. This can be helpful if
there are transient network issues. Retries are only implemented in the
openssh connection plugin and are disabled by default. Retries are
enabled by setting ssh_connection > retries to an integer greater
than 0.
Running a long series of playbooks, or a short playbook against a large
cluster may result in transient ssh failures, some examples logged
[here](https://trello.com/c/1yh6csEQ/13-ssh-errors).
Ansible should be able to retry an ssh connection in order to survive
transient failures.
Ansible marks a host as failed the first time it fails to contact it.
The --force-handlers command line argument was not correctly running
handlers on hosts which had tasks that later failed. This corrects that,
and also allows you to specify force_handlers in ansible.cfg or in a
play.
- become constants inherit existing sudo/su ones
- become command line options, marked sudo/su as deprecated and moved sudo/su passwords to runas group
- changed method signatures as privlege escalation is collapsed to become
- added tests for su and become, diabled su for lack of support in local.py
- updated playbook,play and task objects to become
- added become to runner
- added whoami test for become/sudo/su
- added home override dir for plugins
- removed useless method from ask pass
- forced become pass to always be string also uses to_bytes
- fixed fakerunner for tests
- corrected reference in synchronize action plugin
- added pfexec (needs testing)
- removed unused sudo/su in runner init
- removed deprecated info
- updated pe tests to allow to run under sudo and not need root
- normalized become options into a funciton to avoid duplication and inconsistencies
- pushed suppored list to connection classs property
- updated all connection plugins to latest 'become' pe
- includes fixes from feedback (including typos)
- added draft docs
- stub of become_exe, leaving for future v2 fixes
Adds new settings for managing retry files:
* retry_files_enabled, defaults to True
* retry_files_save_path, defaults to ~/.ansible-retry
This change was adapted from PR #5515.
