rhsm_repository: add an initial unit test (#6758)
So far there are no tests for the rhsm_repository module, which makes it
difficult to do even basic changes. Hence, add an initial version of
unit tests, heavily based on the approach of the redhat_subscription
unit tests.
(cherry picked from commit 08fa05f05f)
Co-authored-by: Pino Toscano <ptoscano@redhat.com>
Make sure that plugins/module_utils/deps.py is cleaned up before every test (#6459)
Make sure that plugins/module_utils/deps.py is cleaned up before every test.
ci_complete
(cherry picked from commit 24efe6b9db)
Co-authored-by: Felix Fontein <felix@fontein.de>
dnsimple_info: remove extraneous importorskip from test (#6439)
* dnsimple_info: remove extraneous importorskip from test
* remove yet another extraneous importorskip from test
(cherry picked from commit 6e913a3b28)
Co-authored-by: Alexei Znamensky <103110+russoz@users.noreply.github.com>
nmcli: Add macvlan connection type support (#6312)
* add nmcli macvlan type
* changelog
* improve docs
* macvlan params
* fix linter and improve module params
* improve_docs
* raise error if type macvlan and macvlan options not set
(cherry picked from commit 29a7d24d75)
Co-authored-by: Sergey Putko <mail@psvlan.com>
nmcli: add runner_fast_rate option (#6148)
* add runner_fast_rate option
* unset default value for runner_fast_rate parameter
* add some commas
* Remove default in copy of argspec.
Co-authored-by: Sam Potekhin <eax24@ya.ru>
---------
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Sam Potekhin <eax24@ya.ru>
(cherry picked from commit d4f272ba52)
Co-authored-by: Alex Groshev <38885591+haddystuff@users.noreply.github.com>
Add Gitlab group runners support (#3935)
(cherry picked from commit f3be0076af)
Co-authored-by: Léo GATELLIER <26511053+lgatellier@users.noreply.github.com>
redhat_subscription: require credentials only when needed (#5664)
The module currently has a static 'required_if' statement for its
parameters that forces any of 'username' or 'activationkey' or 'token'
in case state=present; while this is generally a good idea, it can be
an extra requirements in some cases. In particular, if the system is
already registered, there is no need for credentials -- some of the
operations of the module, such as manipulating pools, can be done
perfectly without credentials.
Hence:
- change the static 'required_if' to require credentials only when
forcing the registration
- check for credentials manually when a registration is needed, i.e.
on an unregistered system; the fail message is the same as the one
shown by 'required_if'
Adapt the tests to this new situation:
- test_without_required_parameters now needs to mock an unregistered
system
- add a new version of test_without_required_parameters to test an
already registered system
- add a simple test case for only state=present usable on an already
registered system
- remove the credentials from a test case for pool attachment that
mocks an already registered system
(cherry picked from commit bbd68e26a2)
Co-authored-by: Pino Toscano <ptoscano@redhat.com>
rhsm modules: cleanly fail when not run as root (#6211)
subscription-manager on RHEL installs a symlink in /usr/bin to
console-helper (part of usermode), which triggers an interactive prompt
for root credentials when run as user. It seems that console-helper
does not handle well non-interactive contexts (e.g. without a TTY for
input), and thus it will hang waiting for input when run as user in an
Ansible task.
Since subscription-manager requires root already anyway (and it will
fail when explicitly run as user), then apply the same logic locally on
all the modules that interact with it: redhat_subscription,
rhsm_release, and rhsm_repository.
(cherry picked from commit 9f67cbbe36)
Co-authored-by: Pino Toscano <ptoscano@redhat.com>
redhat_subscription: use D-Bus for registration if possible (#6122)
subscription-manager currently does not have a way to get credentials
(username, password, activation keys, organization ID) in a secure way:
the existing command line parameters can be easily spotted when running
a process listing while 'subscription-manager register' runs.
There is a D-Bus service, which is used by e.g. cockpit and Anaconda to
interface with RHSM (at least for registration and common queries).
Try to perform the registration using D-Bus, in a way very similar to
the work done in convert2rhel [1] (with my help):
- try to do a simple signal test to check whether the system bus works;
inspired by the login in the dconf module
- pass most of the options as registration options; for the few that are
not part of the registration, execute 'subscription-manager' manually
- add quirks for differently working (or not) registration options for
the D-Bus Register*() methods depending on the version of RHEL
- 'subscription-manager register' is used only in case the signal test
is not working; silent fallback in case of D-Bus errors during the
registration is not done on purpose to avoid silent fallback to a less
secure registration
[1] https://github.com/oamg/convert2rhel/pull/540/
(cherry picked from commit e939cd07ef)
Co-authored-by: Pino Toscano <ptoscano@redhat.com>
dconf: Check for changes properly despite style of quotes used by user (#6049)
dconf: parse GVariant values to check for equality whenever possible
Direct string comparisons are an inaccurate way to compare two
GVariant representations. For example, 'foo' and "foo" (including the
quote marks, which are part of the representation) are equal GVariants
but if you just do a string compare (remember, including the quotes)
they'll be interpreted.
We therefore want to use the `gi.repository` Python library to parse
GVariant representations before comparing them whenever possible.
However, we don't want to assume that this library will always be
available or require it for Ansible to function, so we use a straight
string comparison as a fallback when the library isn't available. This
may result in some false positives, i.e., Ansible thinking a value is
changing when it actually isn't, but will not result in incorrect
values being written into `dconf`.
Co-authored-by: Jonathan Kamens <jik@jik5.kamens.us>
(cherry picked from commit 627371e2d8)
Co-authored-by: Jonathan Kamens <jik@kamens.us>
nmcli: fixed inability to change mtu on vlan connection (#6104)
* tests updated
Co-authored-by: Sam Potekhin <heaveaxy@gmail.com>
(cherry picked from commit 2dee3464dd)
Co-authored-by: Sam Potekhin <24751685+heaveaxy@users.noreply.github.com>
add persistent option for modprobe (#5424)
* add persistent option for modprobe
* add suggested changes + fix broken test
* change modprobe module path in tests due to rebase
* change persistent option type from bool to str with choices
* fix unused import
* add example with persistent option
* fix some minor issues after review
- move regexps compiling to __init__
- move AnsibleModule to build_module function and use this function in tests instead of AnsibleModule
- fix terminlogy issue in documentation
* fix unused-import
(cherry picked from commit 29f5033737)
Co-authored-by: Alex Groshev <38885591+haddystuff@users.noreply.github.com>
Remove unnecessary test imports (#5978)
Remove unnecessary test imports.
(cherry picked from commit 9f87989e7f)
Co-authored-by: Felix Fontein <felix@fontein.de>
OpenNebula/one_vm implement the one.vm.updateconf API call (#5812)
* opennebula: Add template manipulation helpers
* one_vm: Use 'updateconf' API call to modify running VMs
* one_vm: Emulate 'updateconf' API call for newly created VMs
* opennebula/one_vm: Satisfy linter checks
* opennebula/one_vm: Apply suggestions from code review
Co-authored-by: Alexei Znamensky <103110+russoz@users.noreply.github.com>
* opennebula/one_vm: Drop 'extend' function, use 'dict_merge' instead
* Add changelog fragment
* one_vm: Refactor 'parse_updateconf' function
* opennebula/one_vm: Apply suggestions from code review
Co-authored-by: Felix Fontein <felix@fontein.de>
* one_vm: Allow for using updateconf in all scenarios
---------
Co-authored-by: Alexei Znamensky <103110+russoz@users.noreply.github.com>
Co-authored-by: Felix Fontein <felix@fontein.de>
(cherry picked from commit 8818a6f242)
Co-authored-by: Michal Opala <mopala@opennebula.io>
Remote management modules for OCAPI-based devices. (#5754)
* Remote management modules for OCAPI-based devices.
Open Composable API (OCAPI) is a REST-based API designed for data center composability. For more information, see https://www.opencompute.org/documents/open-composable-api-for-ocp-2019-06-24-pdf
This PR introduces ocapi_command and ocapi_info modules. These are based on the existing redfish_command and redfish_info modules and follow similar patterns. This initial implementation includes support for the folowing operations:
- Indicator LED toggling
- Power state toggling
- Enclosure reset (reboot)
- Firmware upload
- Firmware update
- Firmware activate
- Job deletion
- Job status
These modules have been tested against Western Digital OpenFlex(tm) Data24 storage enclosures. API reference is at https://documents.westerndigital.com/content/dam/doc-library/en_us/assets/public/western-digital/product/platforms/openflex/reference-architecture-open-composable-api.pdf
* Fix licensing issue for ocapi_utils.py
* PR Feedback
* Apply suggestions from code review
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/module_utils/ocapi_utils.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/ocapi_info.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Apply suggestions from code review
Co-authored-by: Felix Fontein <felix@fontein.de>
* PR Feedback
Use six module for urlparse
* Apply suggestions from code review
Documentation fixes.
Co-authored-by: Felix Fontein <felix@fontein.de>
* Fix sanity test line too long error.
Co-authored-by: Felix Fontein <felix@fontein.de>
(cherry picked from commit 59a9d34250)
Co-authored-by: Mike Moerk <michael.moerk@wdc.com>
redhat_subscription: Add support for Red Hat API token (#5725)
Add support for Red Hat API token
fix mixed up
fix version
(cherry picked from commit 4dc897d559)
Co-authored-by: Eric C Chong <ecchong@gmail.com>
puppet: refactored to use CmdRunner (#5612)
* puppet: refactored to use CmdRunner
* add changelog fragment
* add more tests
(cherry picked from commit f95e0d775d)
Co-authored-by: Alexei Znamensky <103110+russoz@users.noreply.github.com>
redhat_subscription: add `server_proxy_scheme` parameter (#5662)
Add the `server_proxy_scheme` parameter to configure the scheme used for
the proxy server. This completes the configuration parameters for the
proxy server.
(cherry picked from commit 471f523f53)
Co-authored-by: Pino Toscano <ptoscano@redhat.com>
Stop passing all the "rhsm_", and "server_" module arguments to
"Rhsm.register()", and thus as arguments for
"subscription-manager register":
- right before calling "Rhsm.register()", "Rhsm.configure()" is called
to configure subscription-manager with all the "rhsm_", and "server_"
arguments; hence, they are already configured
- the passed argument to "--serverurl" is partially wrong:
"Rhsm.register()" passes only the hostname, whereas the other bits
(port and prefix) are supported too; this "works" because port and
prefix were already configured previously, and the lax parsing that
subscription-manager does allows for missing bits
- the parsing done by subscription-manager for "--baseurl" strips out
the URL scheme and always uses https: this means that specifying
"rhsm_baseurl: http://server" as module parameter will be taken as
"https://server" by subscription-manager; since "rhsm_baseurl" is
already configured by "Rhsm.configure()", this issue is gone
(cherry picked from commit 101c957631)
Co-authored-by: Pino Toscano <ptoscano@redhat.com>
* gconftool2: refactored to use ModuleHelper + CmdRunner
* add changelog fragment
* removed old code commented out
(cherry picked from commit 6c7e9116e1)
Co-authored-by: Alexei Znamensky <103110+russoz@users.noreply.github.com>
* Fix the logical flaw when deleting a build in the jenkins_build module.
* Fix the logical flaw when deleting a Jenkins build in the jenkins_build module.
* Adding changelogs.
* Update tests/unit/plugins/modules/test_jenkins_build.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Attempt to mock the exception classes.
* Remedy the CI issues when mocking the exception classes.
* Assuming a way to mock the get_build_status function.
* Near to the feasible approach.
* Calls the correct class when unit testing.
* Fix sending wrong arguments when unit testing.
* Directly assign the argument value in the unit testing.
* Fix errors calling different classes.
Co-authored-by: Felix Fontein <felix@fontein.de>
(cherry picked from commit 7610501c66)
Co-authored-by: Tong He <68936428+unnecessary-username@users.noreply.github.com>
* Bump version to 6.0.0.
* sender option is now required.
* Default of want_proxmox_nodes_ansible_host changed from true to false.
* username is now an alias of user, and no longer of workspace.
* Remove deprecated return values in favor of end_state.
* Remove debug option.
* Change default of ignore_volatile_options from true to false.
* gitlab_group must now always contain the full path.
* Change default of norc from false to ture.
* Remove deprecated property.
* Add PR URL.
* Adjust bitbucket unit tests.
* Adjust module_helper integration test.
* Adds transport_mode configuration for Infiniband devices
Adds transport_mode configuration for Infiniband based ipoib devices,
which is one of:
- datagram (default)
- connected
* Remove trailing whitespace
* Add changelog fragment
* Update changelogs/fragments/5361-nmcli-add-infiniband-transport-mode.yaml
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/net_tools/nmcli.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/net_tools/nmcli.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Remove default for transport_mode
* Add test for changing Infiniband transport_mode
* remove blank line at end of file
Co-authored-by: Thomas Gebert <thomas.gebert@atos.net>
Co-authored-by: Felix Fontein <felix@fontein.de>
* WDC Redfish support for setting the power mode.
* Apply suggestions from code review
Co-authored-by: Felix Fontein <felix@fontein.de>
* Add change fragment.
* Add extension to changelog fragment.
Co-authored-by: Felix Fontein <felix@fontein.de>
* nmcli: avoid changed status for most cases with VPN connections
Follow-up https://github.com/ansible-collections/community.general/pull/4746
* `nmcli connection show` includes vpn.service-type but not vpn-type.
Switching to vpn.service-type removes unneeded diffs while keeping
the same functionality, as vpn-type is an alias of vpn.service-type
per nm-settings-nmcli(1).
NetworkManager also adds `org.freedesktop.NetworkManager.` prefix for
known VPN types [1]. The logic is non-trivial so I didn't implement it
in this commit. If a user specifies `service-type: l2tp`, changed will
be always be True:
- "vpn.service-type": "org.freedesktop.NetworkManager.l2tp"
+ "vpn.service-type": "l2tp"
* The vpn.data field from `nmcli connection show` is sorted by keys and
there are spaces around equal signs. I added codes for parsing such
data.
Tests are also updated to match outputs of nmcli commands.
[1] https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/blob/1.38.4/src/libnm-core-impl/nm-vpn-plugin-info.c#L619
* Add changelog
* Some suggested changes
* Make space stripping more flexible - works for cases without equal
signs.
* Keep vpn.data in a test case with no spaces
* nmcli: allow any string for vpn service-type
* Add sanity test (currently fails).
* doc_fragments can also be non-GPLv3+.
* Replace 'Author:' by 'Copyright:' in some specific cases.
* Avoid matching string for license checkers.
* Reformulate not to throw license detection off.
* Add PSF copyright notice for plugins/module_utils/_mount.py.
* Add generic copyright notices.
* Update changelog fragment.
* WDC Redfish support for chassis indicator LED toggling.
* Added changelog fragment.
* Apply suggestions from code review
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Move licenses to LICENSES/, run add-license.py, add LICENSES/MIT.txt.
* Replace 'Copyright:' with 'Copyright'
sed -i 's|Copyright:\(.*\)|Copyright\1|' $(rg -l 'Copyright:')
Co-authored-by: Maxwell G <gotmax@e.email>
* xfconf: add command output to results
* add changelog fragment
* add docs for return value cmd
* Update plugins/modules/system/xfconf.py
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Pacman: Add support for setting install reason
* Improved description
* Fix documentation
* Add changelog fragment
* Use source for installation
* Get all reasons at once
* Removed default for reason
* Added version info to documentation
* Fix NameError
* Moved determination of reason to _build_inventory
* Fix duplication and sanity errors
* adjust tests for changed inventory
* Documentation: remove empty default for reason
* mention packages with changed reason in exit params/info
* Added integration tests for reason and reason_for
Inspired by the integration tests for url packages
* Correct indentation
* Fix indentation
* Also sort changed packages in normal mode
* Also sort result in unit test
* Apply suggestions from code review
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
