* nxos_vpc:Fix idempotency issues with multiple attributes
Several attributes were causing idempotency problems on various platforms:
- `auto_recovery`
- This command can be disabled on certain platforms and will nvgen as `no auto-recovery`
- When enabled it has an additional optional-keyword for changing the `reload-delay` timer value
- This was addressed by adding a new attribute `auto_recovery_reload_delay` to handle setting the timer value
- This new attribute is mutually exclusive with `auto_recovery`
- `/show run vpc/show run vpc all/`
- Changed the command that gets state to `all` so that it could differentiate between `auto-recovery` and `auto-recovery reload-delay`
- This change resulted in also changing some attribute handling withing `get_vpc`, since some attributes like `peer_gw` relied on presence of the config to determine state true or false. With `all` the config is always there so these attrs must specifically check for `'no '` in the string.
- `delay_restore`
- This command has two additional, optional keywords that exist on some platforms and not others.
- New attrs:
- `delay_restore_interface_vlan`
- `delay_restore_orphan_port`
- Modified the `sanity` test to include the new attributes and to fix the platform issues.
- Bugfix Pull Request
`modules/network/nxos/nxos_vpc.py`
- Validated `nxos_vpc` `sanity` test on these platforms, all are now 100% Pass: N35, N3K, N3K-F, N6K, N7K, N9K, N9K-F
- TBD: Future work is needed to add support for `peer_gw_exclude_gw` timers. This could be addressed in the same way as the `auto_recovery_reload_delay` changes included here.
* lint fix
* Add 'version_added' tags for new options
* nxos_snmp_user: platform fixes for get_snmp_user
snmp user output behavior varies quite a bit for the different nxos platforms and required several workarounds:
- N5K/N6k
- These platforms do not support structured output for `show snmp user`.
- The current code lands in an `except` clause when the output is not structured; so I added a new `get_non_structured_snmp_user` method to scrape the state from the regular cli output if it's present.
- N9K-F
- The `group` data in the JSON output is different for this platform; it has a different key (just `group` instead of `TABLE_groups` or `group_names`) and it is not indexed
- For a single group the value is a string, for multiple groups it's a list
- sanity
- N5K/N6K/N9K-F platforms will reject `no snmp user <name> <role>` when it's the last role defined for the user.
- workaround is to use `nxos_user` to remove the user
- Changes validated on:
- `N3K, N3K-F, N35, N6K, N7K, N9K, N9K-F`
- `6.0(2)A8`
- `7.0(3)I2, 7.0(3)I4, 7.0(3)I5, 7.0(3)I6, 7.0(3)I7`
- `7.3(2)D1`
- `7.3(3)N1, 7.3(4)N1`
- `8.3(2)`
- `9.2(2), 9.2(3)`
* fix lint warning
* Same api client can be used for other service as well
* Incorporated Review comments. Modified Category and Guest Fact modules which are also dependent on vmware_rest_client module util
* Adding Integration Tests for vmware_rest_client changes
* Changes to incroporate changes in vcsim testware
* Change to get vm name to attach the tag
* Alter tests to pass
* Change diff_against to make changed work again
* Add another diff_against
* Expose supports_sessions across all EOS connection types
* Change session warning to failure
* supports_sessions needs to be a method to survive the rpc boundary
* Alter tests to match
It is possible the EOS appliance doesn't have an IP address on the
management1 interface, instead just check we have found that interface.
Signed-off-by: Paul Belanger <pabelanger@redhat.com>
* sysctl will now return an error if the value is invalid
sysctl can fail to set a value even if it returns an exit status 0. More
details: https://bugzilla.redhat.com/show_bug.cgi?id=1264080. Because of
this in case of an invalid value or a read-only file system, sysctl
module would return OK, even though it didn't set anything. To be sure
that sysctl correctly applied the changes we also need to check the
output of stderr.
* Run sysctl with LANG=C
Because we are parsing sysctl stderr we need to make sure that errors
are persistent across different system language settings.
* Add changelog fragment for sysctl
- Created `sanity.yaml` to contain all of the tests previously kept in separate files
- Removed `cli` and `nxapi` test directories
- Tested on current supported platforms and versions: `N3K,N6K,N7K,N9K,N3K-F,N9K-F`
* remove deprecated get_md5 from stat
fixes#55309
* removed get_md5 from tests involving stat
* keep get_md5 but hide it
* rst it
* ammended comment
* ws
* added ignore for hidden md5
* Make ansible adhoc work with include_role
Fix logic condition so that include_role works
without
```
ERROR! 'async_val' is not a valid attribute for a IncludeRole
The error appears to be in 'None': line 0, column 0, but may
be elsewhere in the file depending on the exact syntax problem.
(could not open file to display line)
```
* Add include_role test for adhoc
* nxos_snmp_traps: fix 'group: all' for N35 platforms
- `group: all` attempts to enable traps for all features defined in the module's `feature_list`
- `N35` platforms do not support `snmp-server enable traps bfd`; so removing `bfd` from the `feature_list` for that platform
- Minor cleanup in `sanity.yaml` test file
* whitespace lint fix
* Fixes Netconf_config single parameter bug
Fixes 56022
fixed get_config to not require multiple parameters to just run a backup
* Add Integration test for netconf_config
Associated with #56022
tests backup through netconf only using one parameter.
* Added debug to the begin and end of file
* Fix formatting of save config. #56022
* removed blank line at end: #56022
* add vmware_evc_mode module
* alter result message for absent/absent
* Apply suggestions from code review
Co-Authored-By: CastawayEGR <36353334+CastawayEGR@users.noreply.github.com>
* add idempotency test
* change result dict to evc_mode_msg
* refactor to use pyvmomi class
* fix update to only process task on update
* minimize update code
* add single quotes around vars to match other code
* pass datacenter to cluster find
* add check_mode to disable test
This gives us a little more structure to our console logs, which make it
easier for machines / humans to parse. It will be helpful once the
ansible network team starts importing this data into elastic-recheck.
Signed-off-by: Paul Belanger <pabelanger@redhat.com>
This has been broken for some time, but only noticed recently. Because
vyos_command isn't supported on ansible_connection=local, update our
testing to account for that.
Signed-off-by: Paul Belanger <pabelanger@redhat.com>
Refactoring of the following roles to make use of the new
`prepare_vmware_tests` role.
- `vmware_resource_pool`
- `vmware_resource_pool_facts`
- `vmware_target_canonical_facts`
- `vmware_vcenter_settings`
- `vmware_vcenter_statistics`
- `vmware_vm_facts`
- `vmware_vm_host_drs_rule`
- `vmware_vm_vm_drs_rule`
- `vmware_vmkernel`
- `vmware_vmkernel_facts`
- `vmware_vspan_session`
- `vmware_vswitch`
- `vmware_vswitch_facts`
This patch depends on: https://github.com/ansible/ansible/pull/55719
Original PR: https://github.com/ansible/ansible/pull/54882
* Fix loading namespaced doc_fragments
The syntax for specifying a different fragment name was already
using '.' as a separator, so the code needed to be tweaked to
avoid choking on names like `testns.testcoll.fragname` and
`testns.testcoll.fragname.altvar`.
`get_plugin_class()` returns 'docfragment' for the fragment loader;
mangling `subdir` provides consistent alignment with the normal plugin
directory names and avoids needing special handling of plugin types
with 'module' in the name.
* Add changelog entry
Refactoring of the following roles to make use of the new
`prepare_vmware_tests` role.
- `vmware_drs_group`
- `vmware_drs_group_facts`
- `vmware_drs_rule_facts`
- `vmware_drs_portgroup`
- `vmware_drs_portgroup_facts`
- `vmware_dvs_portgroup_facts`
- `vmware_dvswitch`
- `vmware_dvswitch_pvlans`
This patch depends on: https://github.com/ansible/ansible/pull/55719
Original PR: https://github.com/ansible/ansible/pull/54882
Refactoring of the following roles to make use of the new
`prepare_vmware_tests` role.
- `vmware_inventory`
- `vmware_local_role_facts`
- `vmware_local_role_manager`
- `vmware_local_user_facts`
- `vmware_local_user_manager`
- `vmware_maintenancemode`
- `vmware_portgroup_facts`
- `vmware_resource_pool`
- `vmware_resource_pool_facts`
This patch depends on: https://github.com/ansible/ansible/pull/55719
Original PR: https://github.com/ansible/ansible/pull/54882
* `nxos_acl` may fail with `IndexError: list index out of range` while attempting to delete a non-existent ACL.
The failure occurs when the `acl` var is an empty list.
* nxos_acl: catch 501 'Structured output unsupported' when no ACLs present
With some older image versions, `show ip access-list | json` will raise a 501 error indicating `'Structured output unsupported'` when there are no access-lists configured. This change turns off the `check_rc` and then looks for the failure condition.
* Fix kwarg
* Fix lint issues
Refactoring of the following roles to make use of the new
`prepare_vmware_tests` role.
- `vmware_guest`
- `vmware_guest_boot_facts`
- `vmware_guest_custom_attribute_defs`
- `vmware_guest_customization_facts`
- `vmware_guest_disk_facts`
- `vmware_guest_facts`
- `vmware_guest_find`
- `vmware_guest_move`
- `vmware_guest_powerstate`
- `vmware_guest_snapshot`
- `vmware_guest_snapshot_facts`
- `vmware_guest_tools_wait`
This patch depends on: https://github.com/ansible/ansible/pull/55719
Original PR: https://github.com/ansible/ansible/pull/54882
* add multi-node manipulation, delete on xpath match only and count capability to win_xml
* fix pep8 and yamllint errors identified by ci tests
* fixed bugs when handling multiple elements, multiple attribute nodes and handling for attribute nodes when using xpaths that only select attributes like //@lang. Added more tests and tweaked documentation.
* fixed line-too-long error
* fixed trailing space errors
* trailing whitespace expunged
* bump version_added to 2.9 for new changes
* fix PSAvoidUsingPositionalParameters sanity check failure
* refix sanity check as it broke the msg return value
* Check variables are defined before using combine filter
* Add tests for the combine filter
* Remove dependencies that should already be installed
* relocate the function to recursively check for undefined vars
add another test
* changelog
This does not fix the tests themselves, only the syntax (converting from playbooks to roles).
The aix_devices test fails due to use of unsupported state values.
* Remove unnecessary delegate_to in tests.
* Remove incorrect delegate_to in tests.
* Remove unnecessary use of local_action in tests.
* Remove incorrect use of local_action in tests.
* Remove unnecessary use of local_action in tests.
* Remove incorrect use of local_action in tests.
* Remove unnecessary use of local_action in tests.
* Use delegate_to instead of local_action in tests.
* Use setup_remote_tmp_dir instead of TMPDIR.
The vmware test roles do a lot of similar operation to prepare
the environment. This role will be used to reduce the amount of
duplicated code.
The role can prepare an environment on a baremetal environment, this
in addition to vcsim.
Original PR: https://github.com/ansible/ansible/pull/54882
* nxos_ospf_vrf:sanity: ignore no default-metric idempotence tests when I7 images
This is a sanity test cleanup to handle a known image bug with (N9K) I7 images.
The I7 image rejects 'no default-metric' configs, so we're skipping the idempotence
tests that involve this bug.
Tested on N9K images: 9.2(2), 7.0(3)I7, 7.0(3)I2
* simplify check for I7
This is a sanity test cleanup to handle a known image bug with (N9K) I7 images.
The I7 image fails to enable some snmp trap link configs causing an idempotency failure in the sanity, so we're skipping the idempotence tests that involve this bug.
Tested on N9K images: 9.2(2), 7.0(3)I7.
* Start of migration to argparse
* various fixes and improvements
* Linting fixes
* Test fixes
* Fix vault_password_files
* Add PrependAction for argparse
* A bunch of additional tweak/fixes
* Fix ansible-config tests
* Fix man page generation
* linting fix
* More adhoc pattern fixes
* Add changelog fragment
* Add support for argcomplete
* Enable argcomplete global completion
* Rename PrependAction to PrependListAction to better describe what it does
* Add documentation for installing and configuring argcomplete
* Address rebase issues
* Fix display encoding for vault
* Fix line length
* Address rebase issues
* Handle rebase issues
* Use mutually exclusive group instead of handling manually
* Fix rebase issues
* Address rebase issue
* Update version added for argcomplete support
* -e must be given a value
* ci_complete
-Add: Test cases for ansible_parent_role_names and ansible_parent_role_paths
-Add: ansible_parent_role_names/paths variables for when a role is being included by another role.
Ensure inventory plugin loading rel to play
fixes#51033
* clarify paths
* now adding dirs funciton in loader
* better warnings
* each cli should handle adding dirs depending on context
* - initial commit for the modules and tests
* initial implementation based on ec2_asg
* docstring implemtation and further methods initial implementation
* refactoring and pylint changes
* further implementation and integration tests
* added examples and parameter documentation
* removed files that were essentially templates
* added waiter for delete and updated the tests
* removed unit test
* fixed pep8 failure
* fixed pep8 failure
* fixed pep8 password field issue
* fixed pep8 password field issue
* fixed syntax issues
* fixed pep8 defaults
* password property documentation was breaking yaml
* fixed pep8 defaults
* fixed lack of defaults for wait parameter
* added default to boolean parameter
* pep8 fix
* fixed author entry
* adding type to wait parameter
* adding type to wait parameter
* fixed linting issues
* updated description and removed default from docs
* added metaclass
changed default for boolean
* changed declared defaults
* - fixe the delete function
- solved the yaml syntax issue
* added missing defaults for timeout, retry and removed the one for endpointtype as it should be None, becasue parameter is Required anyway
* fixed RETURN documentation issue
* trying to fix the import placement error
* trying to fix the doc error for missing params
* pep8 issues
* added endpoint aliases
* - added documentation
* pep8
* changed to unsupported tag
* changed no_log fact to yes in the integration tests
* added suggested changes to the integration tests
* - making severname use resource_prefix as well as a more generic domain
- removing test fact
* General test improvements.
* Adjust tests to older docker-py versions.
* docker_swarm_server_info: work around problems with older docker-py versions
* Bump minimal docker-py version for options network_filters and disk_usage.
* More general test improvements.
* Correct usage of docker_image.
* Put files into output directory.
* Speed up test.
* Remove old check.
* Add test for generating a CSR with everything, and testing idempotency.
* Proper SAN normalization before comparison.
* Fix check in cryptography backend.
* Convert SANs to text. Update comments.
* Add changelog.
* Warn when log_options values are not strings.
* Add changelog.
* Improve message.
* Improve formatting and formulation of other messages.
* Add test for warning.
* Trying double escaping.
* AWS: add ec2_transit_gateway_info module
* move info module test to main module and ensure unique description for parallel tests
* add type designators to module options in documentation
* assign results and return instead of exit. Add elements directive available with ansible 2.8
* assign results and return instead of exit
* get() method superfluous for module.params
* correct return type in documentation for ASN and format the sample for Tag correctly
* added random uid to test description - removing unstable alias
* change random uuid to resource_prefix to improve source of object identification in testing
* postgresql_idx: improve doc
* postgresql_idx: improve doc, removed unuseless rows from code
* postgresql_idx: misc doc fix
* postgresql_idx: moved common params where they were
* postgresql_idx: moved common params where they were 2
