* update version parsing and move requirements to nso_* modules
prepare for introduction of nso_show module that has other version
requirements than the existing nso_* modules.
* Add nso_show module for retreiving config from Cisco NSO
New module that supports getting configuration and operational data
from Cisco NSO.
Shell is implemented via the command module. There was a special case
in mod_args to do that. Make shell into an action plugin to handle that
instead.
Also move the special case for the command nanny into a command module
action plugin. This is more appropriate as we then do not have to send
a parameter that is only for the command module to every single module.
* WIP adds network subnetting functions
* adds functions to convert between netmask and masklen
* adds functions to verify netmask and masklen
* adds function to dtermine network and subnet from address / mask pair
* network_common: add a function to get the first 48 bits in a IPv6 address.
ec2_group: only use network bits of a CIDR.
* Add tests for CIDRs with host bits set.
* ec2_group: add warning if CIDR isn't the networking address.
* Fix pep8.
* Improve wording.
* fix import for network utils
* Update tests to use pytest instead of unittest
* add test for to_ipv6_network()
* Fix PEP8
This fix check if DNS4 is None or not before proceeding with
other operations. Also, added unit test for this change.
Signed-off-by: Fedor Sumkin <qosys.net@gmail.com>
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
Split the one monolithic test for basic.py into several files
* Split test_basic.py along categories.
This is preliminary to get a handle on things. Eventually we may want
to further split it so each file is only testing a single function.
* Cleanup unused imports from splitting test_basic.py
* Port atomic_move test to pytest.
Working on getting rid of need to maintain procenv
* Split a test of symbolic_mode_to_octal to follow unittest best practices
Each test should only invoke the function under test once
* Port test_argument_spec to pytest.
* Fix suboptions failure
* Fixing aruba's inconsitent indenting.
* Adding config with different children indentation and unit test to confirm the different spacing does not matter.
* Fixing pylint check. Missed an r prefix.
* When inserting a new rule in `insert_after_rule`, check if the old rule is
the last rule, to avoid a list index out of range error when attempting to
access the next rule.
* Add a test for inserting a new rule after the last rule.
Allow CamelCase version of snake_dict_to_camel_dict
(currently only dromedaryCase is supported)
Add reversible option to camel_dict_to_snake_dict
Add tests for both of these options
* TestPlaybookCLI: '--flush-cache' were ignored
Check that using '--flush-cache' does something
* check that '_flush_cache' does something
There isn't any fact by default: the assertion was true even if
'cli._flush_cache()' isn't called.
* Fixing save so it still works. Adding changed as an option for save_when.
* Updating unit tests.
* Updating description to state that changed was added in 2.5.
* Change cast_list_to_dict to more generic rekey_on_member
cast_list_to_dict was taking an arbitrary data format in and returning
an arbitrary data format out. Rework this to be a more generic function
which creates a dict of dicts based on a member of the dict.
Remove cast_dict_to_list since rekey_on_member handles the use cases we
know about and cast_dict_to_list suffers from the same problems as
cast_list_to_dict. If this is still needed we could think about filters
we could add to do this in a short jinja2 pipeline.
* Fix bare excepts (bare excepts even catch sys.exit())
* Fix _clean_result for debug callback with 1 char var names
The check in _clean_results was removing any keys that happened
to be one of the chars in ('invocation') instead of the string
'invocation'. This was meant to be a tuple but there was no comma
so the for iterated the string instead of the tuple.
Introduced in 9dba580204fcc7d95d4ca2ea2ae4ce23fe28c2ed
Update unit test to catch this.
Fixes#33723
* Use .pop() to remove invocation from results dict
In base callback _clean_results, simplify the way the
'invocation' item is removed.
Add some more unit tests.
* Deprecate Entity, EntityCollection and use subspec in network modules
* As per proposal https://github.com/ansible/proposals/issues/76
deprecate use of Entity, EntityCollection, ComplexDict, ComplexList
and use subspec instead.
* Refactor ios modules
* Refactor eos modules
* Refactor vyos modules
* Refactor nxos modules
* Refactor iosxr modules
* Add support for key in suboptions handling
* Fix CI issues
* - Netconf plugin addition for iosxr
- Utilities refactoring to support netconf and cliconf
- iosx_banner refactoring for netconf and cliconf
- Integration testcases changes to accomodate above changes
* Fix sanity failures, shippable errors and review comments
* fix pep8 issue
* changes run_command method to send specific command args
* - Review comment fixes
- iosxr_command changes to remove ComplexDict based command_spec
* - Move namespaces removal method from utils to netconf plugin
* Minor refactoring in utils and change in deprecation message
* rewrite build_xml logic and import changes for new utils dir structure
* - Review comment changes and minor changes to documentation
* * refactor common code and docs updates
In case of workflow delete action, the returned 404 status code
considered as invalid although it's a valid code for not found (deleted)
entity.
Removed verification of the status. Only success should be verified.
Fixes#33524
* Porting tests to pytest
* Achievement Get: No longer need mock/generator.py
* Now done via pytest's parametrization
* Port safe_eval to pytest
* Port text tests to pytest
* Port test_set_mode_if_different to pytest
* Change conftest AnsibleModule fixtures to be more flexible
* Move the AnsibleModules fixtures to module_utils/conftest.py for sharing
* Testing the argspec code requires:
* injecting both the argspec and the arguments.
* Patching the arguments into sys.stdin at a different level
* More porting to obsolete mock/procenv.py
* Port run_command to pytest
* Port known_hosts tests to pytest
* Port safe_eval to pytest
* Port test_distribution_version.py to pytest
* Port test_log to pytest
* Port test__log_invocation to pytest
* Remove unneeded import of procenv in test_postgresql
* Port test_pip to pytest style
* As part of this, create a pytest ansiblemodule fixture in
modules/conftest.py. This is slightly different than the
approach taken in module_utils because here we need to override the
AnsibleModule that the modules will inherit from instead of one that
we're instantiating ourselves.
* Fixup usage of parametrization in test_deprecate_warn
* Check that the pip module failed in our test
* Refactor common network shared and platform specific code into package (part-1)
As per proposal #76 refactor common network shared and platform specific
code into sub-package.
https://github.com/ansible/proposals/issues/76
* ansible.module_utils.network.common - command shared functions
* ansible.module_utils.network.{{ platform }} - where platform is platform specific shared functions
* Fix review comments
* Fix review comments
* Refactors bigip_node
Includes a number of fixes and enhancements in addition to refactoring
the code to be inline with f5 standards
* Fixes upstream errors
* Adds bigip_policy_rule module
This module is the second component of managing LTM policies on
BIG-IP. This module lets you manage the rules of a policy
* Fixing upstream errors
* Correcting YAML errors
* Fixes and features for bigip_provision
Adds support for dedicated modules. Fixes bug in minimum name.
Adds wrappers around checking for up-ness so that they will contribute
to the watch loop
* Fixes upstream errors
* Added . and / to rule args regexp
Things like pam_echo.so file=/etc/foo.txt weren't being matched and
causing incorrect change counts. Adding / and . fixed that.
Fixes#33351
* pamd: test argument with value
Relates #33351
* Adding module enos_config and its UT files
* Removing trailing line
* Removing trailing lines
* Editing enos_module.py to fix build errors
* Removing blank lines in end
* Updating enos_config.py based on review comments
* Adding one more blank line
* Removing training white space
* Removing test_enos_config_force method from UT
* Updating documentation
* Comments by John, Remove version_added: "2.5"
* Add netscaler_nitro_request module
* Make changes as requested.
* Fix whitepsace in EXAMPLES block.
* Set module changed status according to operation performed.
* Added support to Datacenter resources in HPE OneView
* Adjusting comments in oneview_datacenter_facts
* Adding no_log on the documentation
* Using Pytest to Oneview DatacenterFactsModule tests
* Warn on tests used as filters
* Update docs, add aliases for tests that fit more gramatically with test syntax
* Fix rst formatting
* Add successful filter, alias of success
* Remove renamed_deprecation, it was overkill
* Make directory alias for is_dir
* Update tests to use proper jinja test syntax
* Update additional documentation, living outside of YAML files, to reflect proper jinja test syntax
* Add conversion script, porting guide updates, and changelog updates
* Update newly added uses of tests as filters
* No underscore variable
* Convert recent tests as filter changes to win_stat
* Fix some changes related to rebasing a few integration tests
* Make tests_as_filters_warning explicitly accept the name of the test, instead of inferring the name
* Add test for tests_as_filters_warning
* Update tests as filters in newly added/modified tests
* Address recent changes to several integration tests
* Address recent changes in cs_vpc
* add type manipulation
* update for py3
* add tests for list to dict
* Add dict to list tests
* Update tests to search for regex in response
* pep8 clean up
* update Exception for py3
* update test to be py2/3 compat
* update for py26 compat
* potential fix for py3 and py26
* potential fix for py3 and py26 take2
* add new line to kick off shippable
* remove cache file created
* fix filter name
* add space for shipable
* Fix junos integration test fixes as per connection refactor (#33050)
Refactor netconf connection plugin to work with netconf plugin
* Fix junos integration test fixes as per connection refactor (#33050)
Refactor netconf connection plugin to work with netconf plugin
Fix CI failure
Fix unit test failure
Fix review comments
* Adding aliases for field attributes and renaming async attribute
As of Python 3.7, the use of async raises an error, whereas before the use
of the reserved word was ignored. This adds an alias field for field attrs
so that both async and async_val (interally) work. This allows us to be
backwards-compatible with 3rd party plugins that may still reference Task.async,
but for the core engine to work on Py3.7+.
* Remove files fixed for 'async' usage from the python 3.7 skip list
* Allow the user to circumvent adding -tt on ssh commands to help aid in
debugging ssh related problems.
* Move config to the plugin
* Set version_added
* Change yaml section to "connection"
* Fix ssh unit tests
* jsonify inventory
* smarter import, dont pass kwargs where not needed
* added datetime
* Eventual plan for json utilities to migrate to common/json_utils when we split
basic.py no need to move jsonify to another file now as we'll do that later.
* json_dict_bytes_to_unicode and json_dict_unicode_to_bytes will also
change names and move to common/text.py at that time (not to json).
Their purpose is to recursively change the elements of a container
(dict, list, set, tuple) into text or bytes, not to json encode or
decode (they could be a generic precursor to that but are not limited
to that.)
* Reimplement the private _SetEncoder which changes sets and datetimes
into objects that are json serializable into a private function
instead. Functions are more flexible, less overhead, and simpler than
an object.
* Remove code that handled simplejson-1.5.x and earlier. Raise an error
if that's the case instead.
* We require python-2.6 or better which has the json module builtin to
the stdlib. So this is only an issue if the stdlib json has been
overridden by a third party module and the simplejson on the system
is 1.5.x or less. (1.5 was released on 2007-01-18)
* Add new filter to parse xml output for network use cases
Fixes#31026
* Add parse_xml filter
* Add documentation for parse_xml filter
* Edited for clarity.
* Fix review comment and add unit tests
* Fix unit test CI failure
* Fix CI issues
* Fix unit test failures
* Fix review comments
* More copy edits.
* Adding RPC attribute arguments to `junos_rpc` network module.
* Specifying module argument version.
* Fixing DOCUMENTATION block.
* First attempt at new test fixture.
* Updated RPC_CLI_MAP.
* Use `result` instead of `reply`.
This module can be used to manage guests on a vCMP provisioned BIG-IP.
vCMP is a hardware-only feature, therefore this module cannot be used
on the VE editions of BIG-IP.
* move set_module_args to units.modules.utils
* unit tests: reuse set_module_args
* unit tests: mock exit/fail_json in module.utils.ModuleTestCase
* unit tests: use module.utils.ModuleTestCase
* unit tests: fix 'import shadowed by loop variable'
* included inventory and callback in new config
allow inventory to be configurable
updated connection options settings
also updated winrm to work with new configs
removed now obsolete set_host_overrides
added notes for future bcoca, current one is just punting, it's future's problem
updated docs per feedback
added remove group/host methods to inv data
moved fact cache from data to constructed
cleaner/better options
fix when vars are added
extended ignore list to config dicts
updated paramiko connection docs
removed options from base that paramiko already handles
left the look option as it is used by other plugin types
resolve delegation
updated cache doc options
fixed test_script
better fragment merge for options
fixed proxy command
restore ini for proxy
normalized options
moved pipelining to class
updates for host_key_checking
restructured mixins
* fix typo
* Fix vault --ask-vault-pass with no tty
2.4.0 added a check for isatty() that would skip setting up interactive
vault password prompts if not running on a tty.
But... getpass.getpass() will fallback to reading from stdin if
it gets that far without a tty. Since 2.4.0 skipped the interactive
prompts / getpass.getpass() in that case, it would never get a chance
to fall back to stdin.
So if 'echo $VAULT_PASSWORD| ansible-playbook --ask-vault-pass site.yml'
was ran without a tty (ie, from a jenkins job or via the vagrant
ansible provisioner) the 2.4 behavior was different than 2.3. 2.4
would never read the password from stdin, resulting in a vault password
error like:
ERROR! Attempting to decrypt but no vault secrets found
Fix is just to always call the interactive password prompts based
on getpass.getpass() on --ask-vault-pass or --vault-id @prompt and
let getpass sort it out.
* up test_prompt_no_tty to expect prompt with no tty
We do call the PromptSecret class if there is no tty, but
we are back to expecting it to read from stdin in that case.
* Fix logic for when to auto-prompt vault pass
If --ask-vault-pass is used, then pretty much always
prompt.
If it is not used, then prompt if there are no other
vault ids provided and 'auto_prompt==True'.
Fixes vagrant bug https://github.com/hashicorp/vagrant/issues/9033Fixes#30993
* Adding git_command module and its UT file
* Changing Author Name and removing 2 blank lines
* Removing blank lines
* Adding enos_config and its UT files
* Removing config module as I am allowed to have only module per PR
* Work on Ganesh's Review comments
* John Review Comments on enos_command.py
* Review comments of John
* Add mtu option nxos_interface feature idea
Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>
* Add unit test for mtu feature
Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>
* Better handling of malformed vault data envelope
If an embedded vaulted variable ('!vault' in yaml)
had an invalid format, it would eventually cause
an error for seemingly unrelated reasons.
"Invalid" meaning not valid hexlify (extra chars,
non-hex chars, etc).
For ex, if a host_vars file had invalid vault format
variables, on py2, it would cause an error like:
'ansible.vars.hostvars.HostVars object' has no
attribute u'broken.example.com'
Depending on where the invalid vault is, it could
also cause "VARIABLE IS NOT DEFINED!". The behavior
can also change if ansible-playbook is py2 or py3.
Root cause is errors from binascii.unhexlify() not
being handled consistently.
Fix is to add a AnsibleVaultFormatError exception and
raise it on any unhexlify() errors and to handle it
properly elsewhere.
Add a _unhexlify() that try/excepts around a binascii.unhexlify()
and raises an AnsibleVaultFormatError on invalid vault data.
This is so the same exception type is always raised for this
case. Previous it was different between py2 and py3.
binascii.unhexlify() raises a binascii.Error if the hexlified
blobs in a vault data blob are invalid.
On py2, binascii.Error is a subclass of Exception.
On py3, binascii.Error is a subclass of TypeError
When decrypting content of vault encrypted variables,
if a binascii.Error is raised it propagates up to
playbook.base.Base.post_validate(). post_validate()
handles exceptions for TypeErrors but not for
base Exception subclasses (like py2 binascii.Error).
* Add a display.warning on vault format errors
* Unit tests for _unhexlify, parse_vaulttext*
* Add intg test cases for invalid vault formats
Fixes#28038
* implements jsonrpc message passing for ansible-connection
* implements more generic mechanism for persistent connections
* starts persistent connection in task_executor if enabled and supported
* supports using network_cli as top level connection plugin
* enhances logging for persistent connection to stdout
* Update action plugins
* Fix Python3 RPC
* Fix Junos bytes<-->str issues
* supports using netconf as top level connection plugin
* Error message when running netconf on an unsupported platform
* Update tests
* Fix `authorize: yes` for `connection: local`
* Handle potentially JSON data in terminal
* Add clarifying detail if possible on ConnectionError
* Squashing all commits to one as suggested by John
* Adding Unit test method for the module enos_facts.py
* Pep8 and Ylint issues addressed
* Trying again to remove blank line. Some scripts are required for this.
* Bug Fixing for interfaces
* Editing for over indenting issue
* E203 whitespace before ','
* Update enos.py
Added warnings argument as to check_args method
* Update enos_facts.py
Added warnings to check_args method
* When getting the stack events we need to consider the case where we don't have ClientRequestToken fixes#32396
* Adding tests for the case when the ClientRequestToken is not present in the stack creation.
* Renaming the stack that the test for Client Request Token requires so it won't cause collisions with the basic test.
* Ensure include_role unit tests check something
This is not the case: get_tasks_vars doesn't yield
* Fix include_role unit tests
Since e609618274, include_role are not
static anymore.
* Add some tests for iptables
* Fix remove bug (calls 2 times check to remove a chain)
* Add me as maintainer
* Fix PEP8
* Doc: Give more information on issue #18988
* Fix#18988 and test it
* Fix doc (thanks Pillou)
* enable PEP8 check for iptables
This patch addresses a number of issues, large and small, that were
identified by users in the downstream repo.
* formatting of some code
* specific option combinations leading to errors
* missing includes for unit tests
* ios_logging: Fix typo in documentation
* ios_logging: Fix traceback when setting buffered destination without size
When the size parameter is not configured while configuring the buffered
destination, a traceback occurs due to the fact that validate_size expects the
parameter to be an int. Explicitely converting value to int makes the
check work for every case.
* ios_logging: Update size parameter documentation
Update the documentation of the size paramter to reflect the current behaviour
of setting a default of 4096 for the buffered dest.
* ios_logging: Add unit test
Add unit test for ios_logging testing the behaviour clarified in the previous
commits.
* ios_logging: Fix python 2.6 compliance
This module's purpose is to specifically manage the ssl keys. It
is essentially the key component of the bigip_ssl_certificate module.
The modules were separated and the key portion deprecated from
bigip_ssl_certificate in favor of this module.
* - Adds iosxr_netconf module to configure netcong service on Cisco
IOS-XR devices
* - Adds Integration test for module
- Handles diff return from load_config
* - Adds unit test for iosxr_netconf module
* Start using ClientRequestTokens in event lists
* Include request token in all reqs that support it (basically all but check mode/changeset)
* Update placebo recordings
* Add comments for CRQ popping
Module allows you to wait for a bigip device to be
"ready" for configuration. This module will wait for things like
the device coming online as well as the REST API and MCPD being
ready.
If all of the above is not online and ready, then no configuration
will be able to be made.
* better cleanup on task results display
callbacks get 'clean' copy of result objects
moved cleanup into result object itself
removed now redundant callback cleanup
moved no_log tests
* moved import as per feedback
In this refactor we moved to the most recent coding standards for
both F5 and Ansible. Many bugs were fixed and some features were
also added (such as ipv6 support).
New conventions for ansible warrant fixes to accomodate those
in bigip_partition.
This patch also includes an import fix that can raise an error when
Ansible unit tests run
This adds a new type of vault-password script (a 'client') that takes advantage of and enhances the
multiple vault password support.
If a vault password script basename ends with the name '-client', consider it a vault password script client.
A vault password script 'client' just means that the script will take a '--vault-id' command line arg.
The previous vault password script (as invoked by --vault-password-file pointing to an executable) takes
no args and returns the password on stdout. But it doesnt know anything about --vault-id or multiple vault
passwords.
The new 'protocol' of the vault password script takes a cli arg ('--vault-id') so that it can lookup that specific
vault-id and return it's password.
Since existing vault password scripts don't know the new 'protocol', a way to distinguish password scripts
that do understand the protocol was needed. The convention now is to consider password scripts that are
named like 'something-client.py' (and executable) to be vault password client scripts.
The new client scripts get invoked with the '--vault-id' they were requested for. An example:
ansible-playbook --vault-id my_vault_id@contrib/vault/vault-keyring-client.py some_playbook.yml
That will cause the 'contrib/vault/vault-keyring-client.py' script to be invoked as:
contrib/vault/vault-keyring-client.py --vault-id my_vault_id
The previous vault-keyring.py password script was extended to become vault-keyring-client.py. It uses
the python 'keyring' module to request secrets from various backends. The plain 'vault-keyring.py' script
would determine which key id and keyring name to use based on values that had to be set in ansible.cfg.
So it was also limited to one keyring name.
The new vault-keyring-client.py will request the secret for the vault id provided via the '--vault-id' option.
The script can be used without config and can be used for multiple keyring ids (and keyrings).
On success, a vault password client script will print the password to stdout and exit with a return code of 0.
If the 'client' script can't find a secret for the --vault-id, the script will exit with return code of 2 and print an error to stderr.
* documentation was not inline with other Ansible modules
* Python 3 specific imports were missing
* monitor_type is no longer required when creating a new pool; it is now the default.
* A new monitor_type choice of "single" was added for a more intuitive way to specify "a single monitor". It uses "and_list" underneath, but provides additional checks to ensure that you are specifying only a single monitor.
* host and port arguments have been deprecated for now. Please use bigip_pool_member instead.
* 'partition' field was missing from documentation.
* A note that "python 2.7 or greater is required" has been added for those who were not aware that this applies for ALL F5 modules.
* Unit tests were fixed to support the above module
* Adding a cli transport option for the bigip_command module.
* Fixing keyerror when using other f5 modules. Adding version_added for new option in bigip_command.
* Removing local connection check because the F5 tasks can be delegated to any host that has the libraries for REST.
* Using the network_common load_provider.
* Adding unit test to cover cli transport and updating previous unit test to ensure cli was not called.
* Fix rollback in junos_config
Fixes#30778
* Call `load_configuration` with rollback id in case
the id is given as input
* Pass rollback id to `get_diff()` to fetch diff from device
* Fix unit test
- old functionality is still available direct lookup use, the following are equivalent
with_nested: [[1,2,3], ['a','b','c']]
loop: "{{lookup('nested', [1,2,3], ['a','b','c'])}}"
- avoid squashing with 'loop:'
- fixed test to use new intenal attributes
- removed most of 'lookup docs' as these now reside in the plugins
* Make ansible_selinux facts a consistent type
Rather than returning a bool if the Python library is missing, return a dict with one key containing a message explaining there is no way to tell the status of SELinux on the system becasue the Python library is not present.
* Fix unit test
The /etc/os-release based distro detection doesn't
seem to work for Ubuntu 10.04 (no /etc/os-release?).
So it was testing the next case which was /etc/lsb-release to
see if it is 'Mandriva'. Since the check for existence of
(/etc/lsb-release, Mandrive) was the first non-empty dist
file match, 'ansible_distribution' was being set to 'Mandriva'
expecting to be corrected by the data from the dist file content.
But since the dist file parsing for Mandriva didn't match for
Ubuntu 10.04 /etc/lsb-release _and_ there is no Debian specific
lsb-release check, 'ansible_distribution' stayed at 'Mandriva'
and the dist file checking loop keeps going and eventually off
the end of the list before finding a better match.
Adding a debian/ubuntu specific check for /etc/lsb-release after
the debian os-release sets the info correctly and stops further
checking of dist files.
Fixes#30693
* Added support to retrieving LIG resources in HPE OneView
* Fixing copyright header according to review
* Swapping out config for full credentials in parameter for documentation
* Added support to retrieving Enclosures in HPE OneView
- Added unit tests
* Updated version_added to 2.5
* Changing return type of enclosure_script to string
* Fixing copyright header according to review
* Replaced config for credentials in parameters for documentation
* Fix fact failures cause by ordering of collectors
Some fact collectors need info collected by other facts.
(for ex, service_mgr needs to know 'ansible_system').
This info is passed to the Collector.collect method via
the 'collected_facts' info.
But, the order the fact collectors were running in is
not a set order, so collectors like service_mgr could
run before the PlatformFactCollect ('ansible_system', etc),
so the 'ansible_system' fact would not exist yet.
Depending on the collector and the deps, this can result
in incorrect behavior and wrong or missing facts.
To make the ordering of the collectors more consistent
and predictable, the code that builds that list is now
driven by the order of collectors in default_collectors.py,
and the rest of the code tries to preserve it.
* Flip the loops when building collector names
iterate over the ordered default_collectors list
selecting them for the final list in order instead
of driving it from the unordered collector_names set.
This lets the list returned by select_collector_classes
to stay in the same order as default_collectors.collectors
For collectors that have implicit deps on other fact collectors,
the default collectors can be ordered to include those early.
* default_collectors.py now uses a handful of sub lists of
collectors that can be ordered in default_collectors.collectors.
fixes#30753fixes#30623
* Use vault_id when encrypted via vault-edit
On the encryption stage of
'ansible-vault edit --vault-id=someid@passfile somefile',
the vault id was not being passed to encrypt() so the files were
always saved with the default vault id in the 1.1 version format.
When trying to edit that file a second time, also with a --vault-id,
the file would be decrypted with the secret associated with the
provided vault-id, but since the encrypted file had no vault id
in the envelope there would be no match for 'default' secrets.
(Only the --vault-id was included in the potential matches, so
the vault id actually used to decrypt was not).
If that list was empty, there would be an IndexError when trying
to encrypted the changed file. This would result in the displayed
error:
ERROR! Unexpected Exception, this is probably a bug: list index out of range
Fix is two parts:
1) use the vault id when encrypting from edit
2) when matching the secret to use for encrypting after edit,
include the vault id that was used for decryption and not just
the vault id (or lack of vault id) from the envelope.
add unit tests for #30575 and intg tests for 'ansible-vault edit'
Fixes#30575
* Fix 'distribution' fact for ArchLinux
Allow empty wasn't breaking out of the process_dist_files
loop, so a empty /etc/arch-release would continue searching
and eventually try /etc/os-release. The os-release parsing
works, but the distro name there is 'Arch Linux' which does
not match the 2.3 behavior of 'Archlinux'
Add a OS_RELEASE_ALIAS map for the cases where we need to get
the distro name from os-release but use an alias.
We can't include 'Archlinux' in SEARCH_STRING because a name match on its keys
but without a match on the content causes a fallback to using the first
whitespace seperated item from the file content as the name.
For os-release, that is in form 'NAME=Arch Linux'
With os-release returning the right name, this also supports the
case where there is no /etc/arch-release, but there is a /etc/os-release
Fixes#30600
* pep8 and comment cleanup
* Fix pkg_mgr fact on OpenBSD
Add a OpenBSDPkgMgrFactCollector that hardcodes pkg_mgr
to 'openbsd_pkg'. The ansible collector will choose the
OpenBSD collector if the system is OpenBSD and the 'Generic'
one otherwise.
This removes PkgMgrFactCollectors depenency on the
'system' fact being in collected_facts, which also
avoids ordering issues (if the pkg mgr fact is collected
before the system fact...)
Fixes#30623
* Fix nxos provider transport warning issue
* Add default value of transport arg in provider spec
* Remove default value if transport arg in top level spec
This ensure deprecation warning is seen only in case transport
is given as a top level arg in task
* Refactor nxos modules to reference transport value from provider
spec
* Fix unit test
* Remove transport arg assignment in nxos action plugin
* As assigning transport value is handled in provider spec
top level task arg assignment is no longer required
* Add Routing Engine Facts
- Map routing engine output information to routing_engines facts dict.
- Add fact 'has_2RE', which is a quick way to determine how many REs
the chassis has.
* Fix a typo
* Fix more typos
* Add slot number to routing_engine dict
* Add facts about the installed chassis modules
* Fix typo
* Fixed another typo
* Fix Path
* Change path again.
* More Typos
* Add some deubgging
* Add additional information for hardware components.
- Return information about the Routing Engines.
- Return a fact to easily determine if the device
has two routing engines.
- Return information about the hardware modules.
* Addressed pep8 stardard failures.
* Add unit test fixtures.
* Rename fixture.
* Fix unit test failures.
- Rename the fixture file to what the unit test expects.
- Strip out junos namespace attributes.
Rename file to match what the unit test expects.
* Scrubbed the routing engine serial numbers.
* Add unit test facts for new tests.
- Add unit test for ansible_net_routing_engines fact
- Add unit test for ansible_net_modules fact
- Add unit test for ansible_net_has_2RE
* Fixed spacing.
* Don't ask for password confirm on 'ansible-vault edit'
This is to match the 2.3 behavior on:
ansible-vault edit encrypted_file.yml
Previously, the above command would consider that a 'new password'
scenario and prompt accordingly, ie:
$ ansible-vault edit encrypted_file.yml
New Password:
Confirm New Password:
The bug was cause by 'create_new_password' being used for
'edit' action. This also causes the previous implicit 'auto prompt'
to get triggered and prompt the user.
Fix is to make auto prompt explicit in the calling code to handle
the 'edit' case where we want to auto prompt but we do not want
to request a password confirm.
Fixes#30491
Unittests are sometimes run without network connectivity in build
systems. Make that work correctly by mocking out _get_url_data with the
expected return value.
