* Combine systemd units/unit-files output for service_facts
Fixes#47118
Previously we were only taking the output of `systemd units` which
would leave out information about the service units that were
disabled, static, masked, etc. Now we're aggregating the results so
that anything not active/inactive/dead at least is pulled as fact
data with it's state provided.
Signed-off-by: Adam Miller <admiller@redhat.com>
* provide state and status information about services
Fixes#45730
Signed-off-by: Adam Miller <admiller@redhat.com>
* docker_image: add network parameter
Add a network parameter to the docker_image module to specify the
network to use for RUN commands.
Called it network instead of network_mode as the latter seems like a
legacy of when there were just a few default options to choose from,
while now the name of an arbitrary network can be specified.
Fixes#21433
* Format description
* Update docker_image option_minimal_versions
* Ensure network_mode param optional
conn_limit type is set to 'int'. This will allow module to compare conn_limit with record value without type casting.
Fixes: #38118
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Add session tracing support for network_cli, netconf and httapi connection
* Add `persistent_log_messages` configuration option to log device inteaction
in log file for network_cli, netconf and httapi connection
type
* Log jsonrpc request and response in log file is configuration option
is enabled
* Update docs to talk about warning shown when persistent_log_messages is on
* Fix Issue #39598
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Fix unit test for onyx_config
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Add comments for save running config
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Enhance onyx_config bug fix
Signed-off-by: Anas Badaha <anasb@mellanox.com>
* Fix result['changed'] = True comment
Signed-off-by: Anas Badaha <anasb@mellanox.com>
Without this modprobe always reports changed when modprobe-ing a builtin module.
With this, if a kernel module is a builtin, the modprobe module will:
- succeed (without incorrectly reporting changed) if ``state`` is ``present``;
- fail if ``state`` is ``absent``
The failure will have whatever error message modprobe returns when
attempting to remove a builtin module. For example:
``modprobe: ERROR: Module nfs is builtin.``
* MSC: Various bugfixes and features enhancements
This PR includes:
- Lookups of roles, labels and domains
- Auto-create new labels
- Improvements to comparing complex datastructures
- Force removal of sites
- Support non top-level queries
- Document internal functions
- Add parameter types to modules
- Fix documentation examples
- Improvements to idempotency wrt. returning changed
- Support site locations
- Update permission list
- Various improvements to integration tests
* Fix Ci issues
* Handle 'latest' version when installing module for first time
Otherwise, a fresh install of a plugin with 'version: latest' gets installed without its dependencies, rendering the plugin effectively useless.
* Add changelog
* Refactor integration test for lvg module to introduce grow/reduce test
* List correctly current PV in lvg module: fix lvg reduce
Previous behaviour was to only take into account PV passed in 'pvs'
argument. This lead to reduce not working as expecting:
* with state=present and list of wanted pvs, lvg found only the pvs to
add or already present and ignored the pv to remove (obviously absent
from the list of given PV)
* with state=absent and a pv to remove, lvg found that the remaining pvs
list is empty (ignoring possible other PV in the vg) and decides to
remove the vg entirely (as supposely no PV are left anymore to store
lvm metadata)
* Add changelog fragment
* Update `Unknown error` to specific error message
outputs the Exception received rather than just 'Unknown error'
fixes: issue/49713
* Update `Unknown error` to specific error message
improves the error message
When the security group the rule belongs to does not exist and
the state is absent, the module is not properly exited, leading
to a playbook execution failure.
Fixes issue #50057
* added new module to manage deploy keys for BitBucket repositories
* Modified module to pass CI tests
* Updated bitbucket_deploy_key module
* updated message returned when there is an existing deploy key
* bumped version_added to 2.8
* fixed issues reported by ansible-test
Mostly typo/grammar fixes. "Zabbix Server" was changed to just "Zabbix", as it could be slightly confusing - some people might interpret this referencing the server process, although API matters. "capital-case" was changed, as it usually is one of "capital" or "upper-case".
+label: docsite_pr
* Update vmware_deploy_ovf.py
Provided more detailed example using additional, often used parameters
Co-Authored-By: mhoffmann1 <marcin.hoffmann@intel.com>
* Replace variable values in example task
Co-Authored-By: mhoffmann1 <marcin.hoffmann@intel.com>
* Revert "Fix incorrect examples with random filter (#50137)"
This reverts commit 9a7dbd5213.
The correction is incomplete and also based on a 'fix' that was supposed to have been reverted already
* Revert "Added `+1` to the `end` in `random` filter so that it was inclusive (#27215)"
This reverts commit ea2b89c7ae.
reverted fix as agreed at the time, but missed by maintainers.
* Refactoring of cnos_interface module like what followed by other vendors
* To remove cnos-interface from E326 validation ignore list
* Effect of default parameters impacted UT
* Connections can queue messages to be returned from ansible-connection
* Provide fallback for invalid display level
* Strip display from plugins
* Route messages through helper method to try to avoid improper appends
verify_file was improperly always returning true if pyvimomi and requests libs were correct
moved library checking to parse, avoid unneded errors unless the file is actually meant for
this plugin
* rabbitmq_binding: Fix using empty routing key
If the routing key is an empty string we need to use the special props
value ~ in the URL. Otherwise the last part of the URL will be empty,
which will instead be equivalent to the "list all bindings" API call
which always returns 200 OK (as long as the exchange and queue exists).
* rabbitmq_binding: Move routing_key test outside format
Test the routing_key value and set the props value outside the format
call. We leave the original routing_key untouched since its original
value is later needed in create().
* Added organization in the scm_credential get
* Fallback looking for cred in project org
* Tests project with multi org credential
* Fixed CI issue
* Added changelog fragment
* Fix mandatory statement error for junos modules
Fixes#40267
* Add error regex in junos terminal plugin to error out
in case of commit fails
* If commit fails add logic to discard changes before existing
else next task will result in error
* Add integration test
* Minor update
* Revert "allow caller to deal with timeout (#49449)"
This reverts commit 63279823a7.
Flawed on many levels
* Adds poor API to a public function
* Papers over the fact that the public function is doing something bad
by catching exceptions it cannot handle in the first place
* Papers over the real cause of the issue which is a bug in the timeout
decorator
* Doesn't reraise properly
* Catches the wrong exception
Fixes#49824Fixes#49817
* Make the timeout decorator properly raise an exception outside of the function's scope
signal handlers which raise exceptions will never work well because the
exception can be raised anywhere in the called code. This leads to
exception race conditions where the exceptions could end up being
hanlded by unintended pieces of the called code.
The timeout decorator was using just that idiom. It was especially bad
because the decorator syntactically occurs outside of the called code
but because of the signal handler, the exception was being raised inside
of the called code.
This change uses a thread instead of a signal to manage the timeout in
parallel to the execution of the decorated function. Since raising of
the exception happens inside of the decorator, now, instead of inside of
a signal handler, the timeout exception is raised from outside of the
called code as expected which makes reasoning about where exceptions are
to be expected intuitive again.
Fixes#43884
* Add a common case test.
Adding an integration test driven from our unittests. Most of the time
we'll timeout in run_command which is running things in a subprocess.
Create a test for that specific case in case anything funky comes up
between threading and execve.
* Don't use OSError-based TimeoutError as a base class
Unlike most standard exceptions, OSError has a specific parameter list
with specific meanings. Instead follow the example of other stdlib
functions, concurrent.futures and multiprocessing and define a separate
TimeoutException.
* Add comment and docstring to point out that this is not hte Python3 TimeoutError
* Warn of standard behavior of 'default' key store
The default key store typically results in the key being stored as user. In instances where we're trying to install a cert to enable SSL binding in IIS, this will result in an unbind-able cert, as the IIS APPPOOL identity will not be able to read the private key, and presents a very cryptic error of 'A specified logon session does not exist'.
+label: docsite_pr
* fix trailing whitespace
* Use C(user) reference
* specify what's required for successful iis import
- store_location's default value is currently 'LocalMachine' but if this changes it could result in the documentation being inaccurate
- key_exportable is not required for a successful IIS import
* remove stray =
dang cat
Co-Authored-By: tdietrich513 <tom.dietrich@gmail.com>
* Fix example in ini.py
* Fix unittest in test_ini.py to pass CI as latest ansible returns list in
different order. To prevent such issues in future results are sorted
* PEP8 E501 styling improvements
Co-Authored-By: Sergii Golovatiuk <sgolovat@redhat.com>
Trying to use the apt module on a freshly install 16.04 Ubuntu VM with
"ansible -m apt -a 'name=* state=latest' all" fail with this backtrace:
Traceback (most recent call last):
File \"/tmp/ansible_2inxygge/ansible_module_apt.py\", line 1055, in <module>
main()
File \"/tmp/ansible_2inxygge/ansible_module_apt.py\", line 998, in main
upgrade(module, 'yes', force_yes, p['default_release'], use_apt_get, dpkg_options)
File \"/tmp/ansible_2inxygge/ansible_module_apt.py\", line 759, in upgrade
apt_cmd_path = m.get_bin_path(apt_cmd, required=True)
File \"/tmp/ansible_2inxygge/ansible_modlib.zip/ansible/module_utils/basic.py\", line 2182, in get_bin_path
File \"/usr/lib/python3.5/posixpath.py\", line 89, in join
genericpath._check_arg_types('join', a, *p)
File \"/usr/lib/python3.5/genericpath.py\", line 143, in _check_arg_types
(funcname, s.__class__.__name__)) from None
TypeError: join() argument must be str or bytes, not 'NoneType'
It seems that since aptitude is not installed on Xenial, so APTITUDE_CMD is None
and we later hit the bug in the upgrade function since it assume APTITUDE_CMD
is set.
* Improve the output when processing files
* Update docs/bin/plugin_formatter.py
Co-Authored-By: dagwieers <dag@wieers.com>
* Show progress indicator.
* Don't pp.pformat() huge structures when they aren't used anyway.
This saves ~10 seconds on my machine.
* Only show ASCII spinner if stdout is a TTY.
* Fix: E722 do not use bare 'except'
* Add GetManagerNicInventory command for Manager category, and tweak redfish_utils' get_nic_inventory to accommodate manager nic interfaces
* Remove get_manager_nic_inventory, since it is unnecessary while using get_manager in get_nic_inventory
* Rework get_nic_inventory() to take a resource_type as a string, which will be just the category parameter from redfish_facts, making it clearer
* remove extraneous blank line to conform with pep8
* Add GetManagerNicInventory example task to EXAMPLES docstring
* Add cryptography backend for openssl_privatekey.
* Adding ECC support.
No support for X25519 and X449, since they don't support serialization.
* Improve finterprint calculation to work with Python 3.
* Add fingerprint check.
* Fix typo.
* Use separate curve option for elliptic curves, and use type 'ECC'.
* Using curve names as defined in IANA registry.
* Bump minimal supported cryptography version. Older versions might work as well, but I couldn't test them.
* Improve documentation.
Fixes#48171Fixes#33742
Add force_host and issu options support in junos_package module
* Add force_host option to ignore warnings while installing package
* Add issu option to enable issu feature from Ansible
* PSRP: Add support for reconnection retries
This adds support for reconnection retries to overcome sudden Connection
Refused or other recoverable states. (Either because WinRM is (re)started,
or firewall changes make it briefly unavailable)
* Fixes from review comments
* Change test suite to fit expected behaviour
This reverts some changes from ansible/ansible@723daf3
If a line is found in the file, exactly or via regexp matching, it must
not be added again.
insertafter/insertbefore options are used only when a line is to be
inserted, to specify where it must be added.
* Implement the change in behaviour mentioned in the previous commit
* Fix comment to reflect what the code does
* Set the correct return message.
In these cases, the lines are added, not replaced.
* Add a changelog
* Allow tags to be templated from a variable. Fixes#49825
* Restore _load_tags to ensure we do csv tag splitting
* Add tests for csv tags and templated tags
* evaluate_tags doesn't need to accept strings, because _load_tags handles this
* Port bundled distro to use optparse instead of argparse (py2.6)
* Use an absolute import to satisfy the current import testing harness
* Port from subprocess.check_output to subprocess.Popen.communicate() (py2.6)
* Add license location
The changes have been proposed upstream here:
https://github.com/nir0s/distro/pull/232
Upstream is contemplating a branch where everyone wanting python-2.6
support can collaborate without it becoming part of the regularly
supported releases.
Since the 'platform.dist()' and 'platform.linux_distribution()'
methods will be removed from future versions of python, this
provides an alternative to replace ansibles use of those
methods.
lib/ansible/module_utils/distro.py is a copy of
https://github.com/nir0s/distro/blob/master/distro.py
This module is originally from https://github.com/nir0s/distro
and is license under the Apache License, Version 2.0.
* New module - postgresql_idx
* New module postgresql_idx: added returns block
* New module postgresql_idx: fixed documentation, typos and added idxname to fail_json
* In some cases, it appears that Exception should have been used instead
as there's no need to catch sys.exit KeyboardInterrupt and similar.
* In a few cases, it appears that BaseException is used because
a library we depend on calls sys.exit() contrary to good coding
design. Comment those so that we know that those have been audited
and found to be correct and change to use (Exception, SystemExit)
instead.
