* fixed docstring referencing old arguments
* changed out lxml for xml library to avoid import errors
* fixed issue when trying to confirm a commit will end up a NOOP
* fixed issue for passing replace argument to load_config method
* fixes exception thrown when sending commands to device
* fixes exception thrown when retrieving current resource instance
* fixes issue where netconf would be configured in some instances when state
was set to absent
* now returns the command string sent to the remote device
* fixes argument name to be netconf_port with alias to listens_on
Rather than just checking whether a package with the right
name is installed, use `local_nvra` to check whether the
version/release/arch differs too.
Remove `local_name` as it is a shortcut too far.
Fixes#3807Fixes#4529
ansible-doc -vvvv -l show this warning:
[WARNING]: While constructing a mapping from /home/misc/checkout/git/ansible/lib/ansible/modules/core/network/junos/junos_config.py,
line 88, column 5, found a duplicate dict key (required). Using last defined value only.
The eos_eapi module would not configure the port if the protocol wasn't
configured as reported in #4905. This changes the behavior to now allow
the port to be configured independently
fixes#4905
The AWS API requires that any termination policy list that includes
`Default` must end with Default. The attribute sorting caused any list
of attributes to be lexically sorted, so a list like
`["OldestLaunchConfiguration", "Default"]` would be changed to
`["Default", "OldestLaunchConfiguration"]` because default is earlier
alphabetically. This caused calls to fail with BotoServerError per #4069
This commit also adds proper tracebacks to all botoservererror fail_json
calls.
Closes#4069
* added Py2.4 and YAML Documentation fixes
* added no_log for password
* incorporated additional review comments
* remove type for options block
* fix type for pn_multiprotocol
CERN maintains its own fork of "Scientific Linux",
which identifies as "Scientific Linux CERN SLC".
This commit lets Ansible know that this is again
another variant of RHEL.
- Use range instead of xrange.
- Use python3-apt package for python 3.
- Eliminate unsupported for/else/raise usage.
- Use list on dict.items when modifying dict.
- Update requirements documentation.
Also made non-intrustive style fixes (adding blank lines).
Previously calculation of the number of instances that have been
terminated assumed all instances were in the first reservation returned
by AWS. If this is not the case the calculated number of instances
terminated never reaches the number of instances and the module always
times out. By unpacking the instances we get an accurate number and the
module correctly exits.
Currently instances with multiple ENI's can't be started or stopped
because sourceDestCheck is a per-interface attribute, but we use the
boto global access to it (which only works when there's a single ENI).
This patch handles multiple ENI's and applies the sourcedestcheck across
all interfaces the same way.
Fixes#3234
The session keyword is no longer needed or supported in the load_config()
method for eos. This fixes an issue in eos_template where the session
keyword was still being sent.
* remove redundant if submodules_updated
* speed up git by reducing remote commands
* run fetch only once
* run ls-remote less
* don't run ls-remote if one would run fetch anyhow
* remove unnecessary remote_branch check in clone
* kept if depth and version given
* fix fetch on old git versions
The daemonizing code here is taken from an ActiveState recipe, which
includes changing to / as a general best practice. While that is
normally true to allow for deleting the directory that the daemon
process started in, in this case it is not relevant as this is not
intended to be an actual long-running daemon.
Issue ansible/ansible#17466
* Added Solaris support to the mount module.
* Added checking so that if a non-standard fstab file is specified it will
still work in Solaris without breaking existing functionality.
* Added a check to avoid writing duplicate vfstab entries on Solaris
* Added "version_added" to new boot option
This means we will have to unarchive the complete archive if a single change is found.
Unfortunately we cannot fix this for `unzip`, the only hope is a pure-python reimplementation.
This fixes problems reported in the comments of #3810
os.getlogin() returns the user logged in on the controlling terminal. However
'crontab' only looks for the login name of the process' real user id which
pwd.getpwuid(os.getuid())[0] does provide.
While in most cases there is no difference, the former might fail under certain
circumstances (e.g. a lxc container connected by attachment without login),
throwing the error 'OSError: [Errno 25] Inappropriate ioctl for device'.
* 'before' and 'after' are now only applied to 'lines'
* remove update argument
* update doc strings
* add path argument when performing config difference
* removes update argument
* adds `config` option to replace argument
* moves session management into shared module
* cleans up doc strings
* `before` and `after` args now only apply to lines
If you apply `wait=yes` and use `instance_tags` as your filter for
stopping/starting EC2 instances, this stack trace happens:
```
An exception occurred during task execution. The full traceback is: │~
Traceback (most recent call last): │~
File "/tmp/ryansb/ansible_FwE8VR/ansible_module_ec2.py", line 1540, in <module> │~
main() │~
File "/tmp/ryansb/ansible_FwE8VR/ansible_module_ec2.py", line 1514, in main │~
(changed, instance_dict_array, new_instance_ids) = startstop_instances(module, ec2, instance_ids, state, instance_tags) │~
File "/tmp/ryansb/ansible_FwE8VR/ansible_module_ec2.py", line 1343, in startstop_instances │~
if len(matched_instances) < len(instance_ids): │~
TypeError: object of type 'NoneType' has no len() │~
│~
fatal: [localhost -> localhost]: FAILED! => {"changed": false, "failed": true, "invocation": {"module_name": "ec2"}, "module_stderr": "Traceb│~
ack (most recent call last):\n File \"/tmp/ryansb/ansible_FwE8VR/ansible_module_ec2.py\", line 1540, in <module>\n main()\n File \"/tmp/│~
ryansb/ansible_FwE8VR/ansible_module_ec2.py\", line 1514, in main\n (changed, instance_dict_array, new_instance_ids) = startstop_instances│~
(module, ec2, instance_ids, state, instance_tags)\n File \"/tmp/ryansb/ansible_FwE8VR/ansible_module_ec2.py\", line 1343, in startstop_insta│~
nces\n if len(matched_instances) < len(instance_ids):\nTypeError: object of type 'NoneType' has no len()\n", "module_stdout": "", "msg": "│~
MODULE FAILURE", "parsed": false}
```
That's because the `instance_ids` variable is None if not supplied
in the task. That means the instances that result from the instance_tags
query aren't going to be included in the wait loop. To fix this, a list
needs to be kept of instances with matching tags and that list needs to
be added to `instance_ids` before the wait loop.
* Ensure unicode characters in zip-compressed filenames work correctly
Another corner-case we are fixing hoping it doesn't break anything else.
This fixes:
- The correct encoding of unicode paths internally (so the filenames we scrape from the output and is returned by zipfile match)
- Disable LANG=C for the unzip command (because it breaks the unicode output, unlike on gtar)
* Fix for python3 and other suggestions from @abadger
Before this, all spot instance requests would fail because the code
_always_ called module.fail_json when the parameter was set (which it
always was, because the module parameter's default was set to 'stop').
As the comment said, this parameter doesn't make sense for spot
instances at all, so the error message was also misleading.
* fixes issue where configuration was not being loaded (#4704)
* fixes issue where defaults were not included when argument was set to True
tested on EOS 4.15.4F
When the configuration is compared and the results deserialized, the
dumps() function returns a string. This cohereces the return to a list
in case before and/or after needs to be applied
fixes 4707
* fixes save argument to be type bool
* now properly sets the changed returned flag based on diff
* updates docstring RETURNS to add backup_path
* removes unneeded state argument
tested on EOS 4.15.4F
Updates the junos_netconf module with changes to load the
NetworkModule instead of the get_module factory method. This
update is part of the 2.2 refactor of network modules
* adds src argument to load configuration from disk
* adds src_format to set the source file format
* adds update argument with choices merge or replace
* deprecates the replace argument in favor of update=replace
This provides support for passing additional positional parameters to async_wrapper.
Additional parameters will be used by the upcoming async support for Windows.
* Python3 fixes to copy, file, and stat so that the connection integration tests can be run
* Forgot to audit the helper functions as well.
* Fix dest to refledt b_dest (found by @mattclay)
* commands argument now accepts a dict arguments
* rpcs argument now accepts a dict argument
* waitfor has been renamed to wait_for with an alias to waitfor
* only show commands are allowd when check mode is specified
* config mode is no longer allowed in the command stack
* add argument match with valid values any, all
SELinux since 2012 use a configuration file to
convert boolean names from a old name to a new name,
for preserving backward compatibility.
However, this has to be done explicitely when using the python
bindings, and the module was not doing it.
Openshift ansible script use this construct to detect if
a boolean exist or not:
- name: Check for existence of virt_sandbox_use_nfs seboolean
command: getsebool virt_sandbox_use_nfs
register: virt_sandbox_use_nfs_output
failed_when: false
changed_when: false
- name: Set seboolean to allow nfs storage plugin access from containers(sandbox)
seboolean:
name: virt_sandbox_use_nfs
state: yes
persistent: yes
when: virt_sandbox_use_nfs_output.rc == 0
On a system where virt_sandbox_use_nfs do not exist, this work. But
on a system where virt_sandbox_use_nfs is a alias to virt_use_nfs (like
Fedora 24), this fail because the seboolean is not aware of the alias.
On python3, we want to use the surrogateescape error handler if
available for filesystem paths and the like. On python2, have to use
strict in these circumstances. Use the new error strategy for to_text,
to_bytes, and to_native that allows this.
In Ansible 2.x this module gives `changed = True` for all privileges
that are specified including a table with
priv: "database.table:GRANT"
Mysql returns escaped names in the format
`database`.`tables`:GRANT
However in PR #1358, which was intended to support dotted database names
(a crazy idea to begin with), the quotes for the table name were left
out, leading to `curr_priv != new_priv`.
This means that the idempotency comparison between new_priv and
curr_priv is always 'changed'.
This PR re-introduces quoting to the table part of the priv.
dict no longer have a iteritems method, it was replaced
by items. So we need to use six.
Traceback (most recent call last):
File \"/tmp/ansible_hjd7d65c/ansible_module_mysql_user.py\", line 587, in <module>
main()
File \"/tmp/ansible_hjd7d65c/ansible_module_mysql_user.py\", line 571, in main
changed = user_add(cursor, user, host, host_all, password, encrypted, priv, module.check_mode)
File \"/tmp/ansible_hjd7d65c/ansible_module_mysql_user.py\", line 239, in user_add
for db_table, priv in new_priv.iteritems():
AttributeError: 'dict' object has no attribute 'iteritems'
Using something like:
- name: Create ssh keys
user:
name: root
generate_ssh_key: yes
register: key
result into this traceback on F24
Traceback (most recent call last):
File \"/tmp/ansible_jm5d4vlh/ansible_module_user.py\", line 2170, in <module>
main()
File \"/tmp/ansible_jm5d4vlh/ansible_module_user.py\", line 2108, in main
(rc, out, err) = user.modify_user()
File \"/tmp/ansible_jm5d4vlh/ansible_module_user.py\", line 660, in modify_user
return self.modify_user_usermod()
File \"/tmp/ansible_jm5d4vlh/ansible_module_user.py\", line 417, in modify_user_usermod
has_append = self._check_usermod_append()
File \"/tmp/ansible_jm5d4vlh/ansible_module_user.py\", line 405, in _check_usermod_append
lines = helpout.split('\\n')
TypeError: a bytes-like object is required, not 'str'
Traceback (most recent call last):
File "/tmp/ansible_csqv781s/ansible_module_systemd.py", line 374, in <module>
main()
File "/tmp/ansible_csqv781s/ansible_module_systemd.py", line 263, in main
for line in out.split('\\n'): # systemd can have multiline values delimited with {}
* adds support for default facts subset
* adds support for config facts subset
* maintain legacy facts from ops_facts pre-2.2
Tested on Openswitch 0.4.0
* add src argument to provide path to config file
* add new choice to match used to ignore current running config
* add update argument with choices merge or check
* add backup argument to backup current running config to control host
* add save argument to save current running config to startup config
* add state argument to control state of config file
* deprecated force argument, use match=none instead
Note: this module only supports transport=cli
Tested on OpenSwitch 0.4.0
* commands argument now accepts a dict arguments
* waitfor has been renamed to wait_for with an alias to waitfor
* only show commands are allowed when check mode is specified
* config mode is no longer allowed in the command stack
* add argument match with valid values any, all
Tested on OpenSwitch 0.4.0
* add support for vrf configurations
* add support for configing the qos value for eapi
* add config argument to specify the device running-config
Tested on EOS 4.15.4F
IOS devices only support a single command output which is structured
text. This removes the ability to specify the command output format
when providing complex arguments to the commands
Due to a mixup of the group/role/user and policy names, policies with
the same name as the group/role/user they are attached to would never be
updated after creation. To fix that, we needed two changes to the logic
of policy comparison:
- Compare the new policy name to *all* matching policies, not just the
first in lexicographical order
- Compare the new policy name to the matching ones, not to the IAM
object the policy is attached to
We got an error while switching on existent local branch
because git module can not find branch in function get_branches
if we have color.branch=always in git config.
One of the usual issue is that run_command return bytes,
so we have to adapt the string to either be bytes too,
or convert to string.
This result into that kind of traceback:
Traceback (most recent call last):
File \"/tmp/ansible_ej32yu2w/ansible_module_git.py\", line 1009, in <module>
main()
File \"/tmp/ansible_ej32yu2w/ansible_module_git.py\", line 873, in main
git_version_used = git_version(git_path, module)
File \"/tmp/ansible_ej32yu2w/ansible_module_git.py\", line 788, in git_version
rematch = re.search('git version (.*)$', out)
File \"/usr/lib64/python3.5/re.py\", line 173, in search
return _compile(pattern, flags).search(string)
TypeError: cannot use a string pattern on a bytes-like object
Another issue is filter being a object instead of a list.
* key maps are now frozenset instead of dict objects
* FactsBase now includes utility functions for transforming json data structures
Tested on NXOS 7.3(0)D1(1)
* adds support for std network facts
* adds support for default facts subset
* adds support for config facts subset
* adds support for interface facts subset
* adds support for hardware facts subset
Tested on IOS-XR 6.0.0
* adds support for std network facts
* adds support for default facts subset
* adds support for config facts subset
* adds support for interface facts subset
* adds support for hardware facts subset
* maintains backwards capabilitity with 2.1 facts module
Tested on NXOS 7.3(0)D1(1)
* adds support for std network facts
* adds support for default facts subset
* adds support for config facts subset
* adds support for interface facts subset
* adds support for hardware facts subset
Tested on EOS 4.15.4F
* add src argument to provide path to config file
* add new choice to match used to ignore current running config
* add update argument with choices merge, replace or check
* add backup argument to backup current running config to control host
* add comment argument to provide comment to commit
* deprecated force argument, use match=none instead
Lineinfile deals heavily with Unic text files. Makes some sense to deal
with it all as byte strings. So there is a lot of work done here to
show that we're dealing with byte strings throughout.
The ssh_public_keys must be a list otherwise will give the error:
"argument ssh_public_keys is of type <type 'dict'> and we were unable to convert to list"
* Improve the correct handling of gtar and unzip options
Add the option --show-transformed-names when extra_opts is being used
Ignore bogus warnings related to empty filenames
Properly quote _and_ escape filenames for unzip command
Rewrite gtar options and provide run_command with array, not string
This fixes#2480 and #4109.
* Make check-mode work for zip-files
Check-mode was disabled for zip-files since gtar did not support it.
This change enables check-mode support for zip-files, but does skip the task when used with gtar.
(Best of both worlds)
Also remove unused compress_mode variable.
This replaces PR #4401, the changes overlap somewhat so I merged them
* commands argument now accepts a dict arguments
* waitfor has been renamed to wait_for with an alias to waitfor
* only show commands are allowd when check mode is specified
* config mode is no longer allowed in the command stack
* add argument match with valid values any, all
* commands argument now accepts a dict arguments[1]
* waitfor has been renamed to wait_for with an alias to waitfor
* only show commands are allowd when check mode is specified
* config mode is no longer allowed in the command stack
* add argument match with valid values any, all
[1] The commands argument will now accept a dict argument that can
specifiy the output format of the command. To specify a dict argument
use the form of { command: <str>, output: <str>, prompt: <str>,
response: <str> }.
* arguments for vyos_config for 2.2 are now complete
* adds loading config file from disk (src argument)
* removes unsupported rollback argument
* changes update_config to update with options merge or check
* changes backup_config to backup
* add state argument for state of configuration file
* adds backup argument to backup current configuration
* adds save argument to control if active config is saved to disk
* adds comment argument for setting commit comment
* adds match argument to control configuraiton match
Tested with VyOS 1.7
* Import module_utils at the top
* Fix python3 by marking literals combined with stdout/stderr as byte
literals
* Mark parameters as type=path where appropriate
* FreeBSD do not support --omit-header and --absolute-names
* The option for following symlink wth getfacl is different on FreeBSD
* ZFS on Freebsd use nfsv4 acls, who use a slightly different syntax
* FreeBSD do not have a --test flag, so always return 'True'
* FreeBSD do not have the --omit-headers options, so we have to filter by ourself
* Mark Freebsd as working for the acl module
* commands argument now accepts a dict arguments[1]
* waitfor has been renamed to wait_for with an alias to waitfor
* only show commands are allowd when check mode is specified
* config mode is no longer allowed in the command stack
* add argument match with valid values any, all
[1] The commands argument will now accept a dict argument that can
specifiy the output format of the command. To specify a dict argument
use the form of { command: <str>, output: <str>, prompt: <str>,
response: <str> }. Command and output are required arguments. Output
accepts valid values text and json.
* add src argument to provide path to config file
* add new choice to match used to ignore current running config
* add update argument with choices merge, replace or check
* add backup argument to backup current running config to control host
* add defaults argument to control collection of config with or without defaults
* add save argument to save current running config to startup config
* add state argument to control state of config file
* deprecated force argument, use match=none instead
The CommandRunner will not allow duplicate commands to be added to the
command stack. This fix will now catch the exception and continue if
a duplicate command is attempting to be added to the runner instance.
* commands argument now accepts a dict arguments[1]
* waitfor has been renamed to wait_for with an alias to waitfor
* only show commands are allowd when check mode is specified
* config mode is no longer allowed in the command stack
* add argument match with valid values any, all
[1] The commands argument will now accept a dict argument that can
specifiy the output format of the command. To specify a dict argument
use the form of { command: <str>, output: <str>, prompt: <str>,
response: <str> }. Command and output are required arguments. Output
accepts valid values text and json.
* add src argument to provide path to config file
* add new choice to match used to ignore current running config
* add update argument with choices merge or check
* add backup argument to backup current running config to control host
* add defaults argument to control collection of config with or without defaults
* add save argument to save current running config to startup config
* add state argument to control state of config file
* deprecated force argument, use match=none instead
* merge changes from ios shared module functions into ios_config.
* add src argument to provide path to config file
* add new choice to match used to ignore current running config
* add update argument with choices merge or check
* add backup argument to backup current running config to control host
* add defaults argument to control collection of config with or withoutdefaults
* add save argument to save current running config to startup config
* add state argument to control state of config file
* deprecated force argument, use match=none instead
* commands argument now accepts a dict arguments[1]
* waitfor has been renamed to wait_for with an alias to waitfor
* only show commands are allowd when check mode is specified
* config mode is no longer allowed in the command stack
* add argument match with valid values any, all
[1] The commands argument will now accept a dict argument that can
specifiy the output format of the command. To specify a dict argument
use the form of { command: <str>, output: <str>, prompt: <str>,
response: <str> }. Command and output are required arguments. Output
accepts valid values text and json.
Importing a (sign only) subkey with apt_key module always fails,
however the actual keyring gets created and contains the correct keys.
Apparently the all_keys function skips the subkeys, hence the problem.
Fixes#4365
* make HEAD parsing more robust
* Fail the module for any splitter errors
* fix combining depth and version on filepath urls by prepending file://
Addresses #907
* Made some changes to determine branch name more reliable (it may contain slashes now).
* Determination of branch name more reliable, as per comment on PR #907
- Removed required_if.
- Fixed doc strings.
- Removed debug output being appended to actions.
- Put import of basics at bottom to be consistent with other docker modules
- Added 'containers' alias to 'connected' param
- Put facts in ansible_facts.ansible_docker_network
* Git: Determine if remote URL is being changed
Ansible reported there were no changes when only the remote URL for a
repo was changed. This properly tracks and reports when the remote URL
for a repo changes.
Fixes#4006
* Fix handling of local repo paths
* Git: Use newer method for fetching remote URL
* Git: use ls-remote to fetch remote URL
Using ls-remote to fetch remote URL is supported in earlier versions
of Git compared to using remote command.
* Maintain previous behavior for older Git versions
Previously whether or not the remote URL changed was not factored
into command's changed status. Git versions prior to 1.7.5 lack the
functionality used for fetching a repo's remote URL so these versions
will update the remote URL without affecting the changed status.
