The new module will allow users to control LXC containers from ansible.
The module was built for use in LXC >= 1.0 or greater and implements most
of what can be done using the various lxc clients with regards to running
containers. This first module is geared only at managing lxc containers.
The module provides:
build containers
destroy containers
archive containers
info from a single container
start / stop / restart containers
run commands within containers
add/modify lxc config for a container
supports backends including LVM
Some packages attempt to prompt the user for certain settings during
installation. Thus, this parameter sets the environment variable
$BATCH to 'yes', which forces package installation scripts to accept
default values for these interactive prompts. This should work for all
prompts that have a default value and aren't implemented through a
custom script (as this variable is built into the ports/package system).
FIXME: Package install should fail if it prompts and batch isn't set;
currently, the install hangs indefinitely.
TODO: Allow user to specify the answers to certain prompts.
I (github.com/mwpher) have NOT tested this with any packages besides
bsdstats. It's a small improvement, but not a complete answer to all
the complexities of package installation.
The function normalizes checks for UTF-8, but the same issue exists for
other locales as well. This fix adds normalization for EUC-JP, a Japanese
locale.
In case of release repositories or other special cases you might not
need the autorefreshing of the repos. This patch adds a configure
option instead of hard enabling this.
Signed-off-by: Justin Lecher <jlec@gentoo.org>
Currently, either you apply the change in the configuration
of firewalld ( without permanent=True ), or you apply it live.
I most of the time want to do the 2 at the same time, ie open the
port ( so I can use the service ) and make sure it stay open on reboot.
The definition was leaking into ansible.module_utils.basic and causing
type checking to fail when running module as script. Not entirely clear
why this should be the case.
RedHat-based OSes have a version of update-alternatives which comes from
the chkconfig package and does not support the --query parameter. Work
around that.
* The policy is shown in `status verbose`, so all the check mode stuff should keep working.
* `--dry-run` works as expected.
* No idea whether it's legal as an argument to `interface`
re.match in has_changed function never worked properly, because match
requires searched sequence to be present exactly at a start of processed
string, which is not the case here.
All the actions by the mysql_replication plugin can be done by connecting to the NULL database. There is no need to connect to the 'mysql' db, since there are permissions problems when connecting to remote hosts, e.g. when you want to query "SHOW MASTER STATUS" on a remote host.
module.exit_json() does not like when the "changed" variable contains a
match object:
TypeError: <_sre.SRE_Match object at 0x81e2ae58> is not JSON serializable
Running the module with the argument "upgrade=yes" invokes an upgrade of
all installed packages.
While here clean up some comments.
Functionality requested by @qbit.
* Do not use the fstab parameter on openbsd for mounting
OpenBSD's mount command doesn't allow selecting which fstab file to use.
So if we're operating on the live filesystem (mount or remount) return
an error if the user specified an fstab file.
Fixes#5591
* Fix the logic inversion (thanks to @landryb)
The `service` module starts services that are not running when
`action=restarted` or `action=reloaded`, which is especially convenient
for initial deployments because it eliminates an extraneous operation
for when the service starts for the first time. This commit adjusts the
behavior of the `systemd` module to match.
Sets the SSH option `IdentitiesOnly=yes` in the SSH wrapper when a
`key_file` is provided to the git module. This option ensures that
the provided key is used. Otherwise, the system's ssh-agent could
provide undesired identities when connecting.
From ssh_config(5):
> Specifies that ssh(1) should only use the authentication identity and
> certificate files explicitly configured in the ssh_config files or
> passed on the ssh(1) command-line, even if ssh-agent(1) or a
> PKCS11Provider offers more identities. The argument to this keyword
> must be “yes” or “no”. This option is intended for situations where
> ssh-agent offers many different identities. The default is “no”.
* Change example syntax on nxos_feature module
* Change example syntax on nxos_hsrp module
* Change example syntax on nxos_igmp module
* Change example syntax on nxos_interface module
* Change example syntax on nxos_interface_ospf module
* Change example syntax on nxos_ip_interface module
* Change example syntax on nxos_ping module
* Change example syntax on nxos_switchport module
* Change example syntax on nxos_vlan module
* Change example syntax on nxos_vrf module
* Change example syntax on nxos_vrf_interface module
* Change example syntax on nxos_vrrp module
* Change example syntax on meta module
* Change example syntax on set_fact module
* Change example syntax on win_copy module
* Change example syntax on win_file module
* Change example syntax on win_get_url module
Remove escaping of \ characeter in Windows paths since it's no longer required for single quoted or unquoted values when using multi-line YAML syntax.
* Change example syntax on win_lineinfile module
* Change example syntax on win_msi module
* Change example syntax on win_stat module
* Remove nxos_bgp example from nxos_igmp module
* Mark examples as regexp to avoid syntax error
* Cleanup win_copy.py examples
* Cleanup win_file.py examples
* Remove quotes in win_get_url.py examples
* Cleanup quotes and languare in win_lineinfile.py
* Cleanup examples in win_group.py
* Cleanup examples in win_service.py
* Don't use : in documentation because it breaks the YAML syntax check
* Cleanup win_copy.py examples
* Cleanup win_copy.py examples
* Minor change to fix test failure
* Use single quotes
* Update documentation for vyos_command
Add information on new environment variable added in #18546.
Add note on command that should not be run via Ansible.
* White space changes
Two spaces after period.
If 'src_format' is not mentioned in playbook
and config is in text format a list object is
passed to 'guess_format' function instead
of string, hence TypeError execption is seen.
Fix is to pass string object instead of list.
When using a file:// or ftp:// URL the normal provisions that a non-200 status code means error have been disabled.
But the common error status -1 from fetch_url is not properly returning an error message.
This fix ensures that if the status code returns -1, we return a proper error message.
This fixes#3563
* win_msi - Dont list choices twise
http://docs.ansible.com/ansible/win_msi_module.html shows
Choices:
True
True
False
False
As the yes/no are expanded to true/false by the docs generation
* Update win_msi.py
* allow mount to try remount
falls back to unmount/mount
* fixed fstab handling and switched to ismount
custom function deals with bind mounts unlike built in
* un ** args
* last ** args
This updates the pull request template to provide more context about why specific things may be needed. This helps to make it feel like it is being asked for to help the team rather than arbitrary questions that don't seem applicable, such as command output for a docs change.
Allow some operations on missing services
Better sysv handling
Rearranged error reporting
fixed load error catching and order logic
also minor doc/comment updates
added warnings
- Adds the 'link' file_type for finding symbolic or hard links
- Use `os.lstat` instead of `os.stat` to prevent the following
of links when statting the file.
* Change example syntax on os_auth module
* Change example syntax on os_client_config module
* Change example syntax on os_image_facts module
* Change example syntax on os_networks_facts module
* Change example syntax on os_nova_flavor module
* Change example syntax on os_object module
* Change example syntax on os_server module
* Change example syntax on os_subnet_facts module
* Change example syntax on rax_files module
* Change example syntax on rax_files_objects module
* Change example syntax on mysql_db module
* Change example syntax on file module
* Change example syntax on uri module
* Change example syntax on cl_bond module
* Change example syntax on cl_bridge module
* Change example syntax on cl_img_install module
* Change example syntax on cl_interface module
* Change example syntax on cl_license module
* Change example syntax on cl_ports module
* Remove trailing colon
I broke backwards compat with the addition to define when a password
should be updated. It was requiring that a password value be passed when
deleting a user, which seems silly.
This moves the argument logic out of the argument spec and into when it
would be needed, when state is present.
* Change example syntax on supervisorctl module
* Change example syntax or _ec2_ami_search module
* Change example syntax on cloudformation module
* Change example syntax on ec2 module
* Change example syntax on ec2_facts module
* Change example syntax on ec2_eip module
* Change example syntax on rds module
* Change example syntax on route53 module
* Change example syntax on s3 module
* Change example syntax on digital_ocean module
* Change example syntax on docker_service module
* Change example syntax on cloudformation module
* Change example syntax on gc_storage module
* Change example syntax on gce module
* Change example syntax on gce_mig module
* Change example syntax on _glance_image module
* Change example syntax on _keystone_user module
* Change example syntax on _nova_keypair module
* Change example syntax on _quantum_floating module
* Change example syntax on _quantum_floating_ip_associate module
* Change example syntax on _quantum_network module
* Change example syntax on _quantum_router module
* Change example syntax on _quantum_router_gateway module
* Change example syntax on _quantum_router_interface module
* Change example syntax on _quantum_subnet module
* SQUASH _quantum_subnet
* Add missing quotes
* Change example syntax on authorized_key module
* Change example syntax on cron module
* Change example syntax on group module
* Change example syntax on hostname module
* Change example syntax on seboolean module
* Change example syntax on selinux module
* Change example syntax on service module
* Change example syntax on sysctl module
* Change example syntax on systemd module
* Change example syntax on user module
* Change example syntax on debug module
* Change example syntax on fail module
* Change example syntax on include module
* Change example syntax on include_role module
* Change example syntax on include_vars module
* Change example syntax on pause module
* Change example syntax on wait_for module
* Change example syntax on apache2_module module
* > Change example syntax on django_manage module
* Change example syntax on htpasswd module
The new create option with the default value 'no' changes the
behavior from the previous Ansible releases. Change the default to
'yes' to create missing ini files by default.
Fixes: #5488
Moving the "check if min_size/max_size/desired_capacity..." code to execute BEFORE the desired_capacity code is used in the following operation:
num_new_inst_needed = desired_capacity - len(new_instances)
Otherwise the following exception occurs when desired_capacity is not specified and you're replacing instances:
num_new_inst_needed = desired_capacity - len(new_instances)
TypeError: unsupported operand type(s) for -: 'NoneType' and 'int'
Stack Trace:
An exception occurred during task execution. The full traceback is:
Traceback (most recent call last):
File "/var/lib/awx/.ansible/tmp/ansible-tmp-1478229985.74-62334493713074/ec2_asg", line 3044, in <module>
main()
File "/var/lib/awx/.ansible/tmp/ansible-tmp-1478229985.74-62334493713074/ec2_asg", line 3038, in main
replace_changed, asg_properties=replace(connection, module)
File "/var/lib/awx/.ansible/tmp/ansible-tmp-1478229985.74-62334493713074/ec2_asg", line 2778, in replace
num_new_inst_needed = desired_capacity - len(new_instances)
TypeError: unsupported operand type(s) for -: 'NoneType' and 'int'
fatal: [localhost]: FAILED! => {"changed": false, "failed": true, "invocation": {"module_name": "ec2_asg"}, "module_stderr": "Traceback (most recent call last):\n File \"/var/lib/awx/.ansible/tmp/ansible-tmp-1478229985.74-62334493713074/ec2_asg\", line 3044, in <module>\n main()\n File \"/var/lib/awx/.ansible/tmp/ansible-tmp-1478229985.74-62334493713074/ec2_asg\", line 3038, in main\n replace_changed, asg_properties=replace(connection, module)\n File \"/var/lib/awx/.ansible/tmp/ansible-tmp-1478229985.74-62334493713074/ec2_asg\", line 2778, in replace\n num_new_inst_needed = desired_capacity - len(new_instances)\nTypeError: unsupported operand type(s) for -: 'NoneType' and 'int'\n", "module_stdout": "", "msg": "MODULE FAILURE", "parsed": false}
to retry, use: --limit @
In cases where a CFN stack could not complete (due to lack of
permissions or similar) but also failed to roll back, the gathering of
stack resources would fail because successfully deleted items in the
rollback would no longer have a `PhysicalResourceId` property.
This PR fixes that by soft-failing when there's no physical ID
associated to a resource.
The Instance UUID(refered to as PersistenceUUID in the API) is a the ID
vcenter uses to idenify VMs.
My use case for this is that I configure Zabbix using ansible and its
vmware module relies on using these to identify VMs.
* Expose internal_network in os_floating_ip
Shade project has finally exposed this argument so now this module
matches old quantum_floatingip module's capabilities.
Use "nat_destination" term instead of "internal_network" to match shade
terminology.
* Add (private|internal)_network aliases to os_floating_ip
* Fix typo in os_floating_ip
stdout lines are now available when certain exceptions occur
(Ref ansible/ansible#18241)
Also noticed that to_lines was essentially handled in
lib/ansible/plugins/action/__init__.py -- only difference was
it didn't handle a list. to_lines() could be removed across
network modules now, but this commit is only for ios_command.
Also adds disconnect() to ios_command that was added
to ios_config in #5247
After installing a package from the ports collection on a
fresh FreeBSD 11.0, Ansible was unable to enable it, failing with
"unable to get current rcvar value". Debugging showed that sysrc
didn't see the variable from /usr/local/etc/rc.d/myservice, but
adding the value was working.
So we will just fallback to the default value if we can't find it.
There is a desire to not have this module always result in a change if a
password argument is supplied. The OpenStack API does not return a
password back when we get a user, so we've been assuming that if a
password argument was supplied, we should attempt to change the password
(even if nothing else is changing), and that results in a "changed"
state. Now we will only send along a password change attempt if the user
wants one (the default to match history).
Fixes#5217
this fix will now handle loading a multiline banner on ios based
devices without hanging. It separates the processing of banners
from the remainder of the config
link #5318
The module will error if it tries to use a cli command that is not available
on a given platform. This fix will address that problem. If the cli
command is not available, then the command is silently discarded and the
facts that the command output is based on is not returned. Any failed
commands are provided in the module return under the failed_commands
key. This fix also updates the Examples docstring to make it consistent
with other ios_* modules
fixes#5444fixes#5372
Allow installation of PPA repositories on non-Ubuntu Debian derived
distribution targets (e.g. neon, Mint, Debian itself) by removing the
specific check for UbuntuDistribution before allowing PPA: format
sources. This fixes the addition of PPA repositories under KDE neon (as
the codenames match the base Ubuntu distribution).
To make the functionality also useful under Mint and Debian which have
different codenames to their Ubuntu upstream / downstream releases, add
a 'codename' option to override the default used in the PPA source
entry.
* Add 'on the remote server' to `file` parameter description
* Add example showing how to use the `file` parameter, with specific
language about the file's location being on the 'remote server'
This fixes the behavior that the dest is directory,
when we set the "force: no" argument.
To be join the dest and the src's basename,
before checking the "force" argument.
* apt: If the cache object fails to lost due to a corrupt file, try to update the cache until it is fixed.
* Append -q to the update parameters
* Remove unused variable
* Use a string that doesn't rely on internationalization
* Use py24 exception style
* Use get_exception
Fixes#2951
