- pass the arguments to run_command() directly as list, rather than
joining the arguments to string, which run_command() will need to
split again
- disable the expansions of variables, as there are none
Adapt the unit test to the different way run_command() is called,
factorizing the kwargs for run_command() so there is less repetition.
There should be no behaviour changes.
The two RegistrationBase & Rhsm classes were copied from the ones in the
shared module_utils.redhat module; that said:
- the versions here got improvements over the years
- the RegistrationBase in module_utils.redhat is used only by the RHN
modules, which are deprecated and slated for removal
Hence, the classes here can be kept and simplified a bit:
- fold the non-dummy content of RegistrationBase into Rhsm: there is no
more need for the separate RegistrationBase base class
- drop the init arguments "username", "password", and "token": the
instance variables of them are not used anywhere, as the needed
credentials (together with other variables) are passed to the
register() method
- create the Rhsm object later in main(), after the AnsibleModule
creation and the uid check: this avoids the creation of Rhsm with a
null module variable, changing it later
There should be no behaviour change.
This module contains bits that are either unused (the Rhsm* classes), or
used only by deprecated modules (the RegistrationBase class).
Considering that the bits here have not seen updates in years, it is
unlikely that anyone is actually using them as "library".
Hence, deprecate the whole module altogether:
- the Rhsm* classes, as not used by anything, are slated for removal in
9.0.0
- the RegistrationBase class is slated for removal in 10.0.0, together
with its only user (i.e. the rhn_register module)
The "pool" option is slower to use, and the regexp may expand to broader
results than wanted. Because of that, deprecate it in favour of the
"pool_ids" options (which is much better), slating it for removal in
community.general 10.0.0.
The "autosubscribe" alias for the "auto_attach" option has been
deprecated for many years, although only in the documentation.
Officially mark it as deprecated also in the module parameters spec,
slating it for removal in 9.0.0.
* MH mh/mixins/deps.py: prevent deprecation warning when no deps are specified
* rollback empty "patch" on license markers to prevent test error
* disable test in ansible 2.12
* add changelog frag
* add span event attributes (task name and host name)
* add fragment
* refactor: use set_attributes
* Add same span attributes to the event
* chore: change description in the fragment
* as mentioned in the code review
* use flag to disable the attributes in logs
there are some vendors that might not require those attributes since those details are shown in the UI when accessing the spans, i.e.: jaeger
* Update plugins/callback/opentelemetry.py
Co-authored-by: Felix Fontein <felix@fontein.de>
---------
Co-authored-by: Felix Fontein <felix@fontein.de>
* [WIP] snap: aware of channel in installed snaps
* parse snap list output and assert whether channel matches
* undo test
* fail rightfully when install with different channel does not work
* transparetent refresh
* rollback comment in integration test
* rollback comment in integration test
* add changelog frag
* Update plugins/modules/snap.py
Co-authored-by: Felix Fontein <felix@fontein.de>
---------
Co-authored-by: Felix Fontein <felix@fontein.de>
The Bitwarden CLI requires a `login` followed by an `unlock` operation.
The later will display a message regarding setting (and exporting) the
`$BW_SESSION` env. var. When using the `bitwarden` lookup plugin, having
the env. var. set and available (exported) to Ansible is critical.
Without it, the plugin will simply return the error:
`Bitwarden Vault locked. Run 'bw unlock'.`
Make this clearer in the requirement documentation.
Signed-off-by: Chris Evich <cevich@redhat.com>
* New Proxmox VE modules to handle pools and their membership
* Fix pep8 linting errors
* Fix pep8 and compatibility errors
* Add required fields in the documentation
* Typo fix
* Fix pylint errors
* Fix the last one error
* Address review comments
* Fix linting error
* Add integration tests playbook
* Add assert for the diff mode
* Address review comments
* Fix typo in the word
* Fail for non-empty pool even in check_mode
* proxmox: support param `timezone` when creating container
* add changelog fragments for #6510
* Apply suggestions from code review
Co-authored-by: Felix Fontein <felix@fontein.de>
* Improved param description
* Use major.minor version comparison for options
---------
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Sergei Antipov <s.antipov@mulesoft.com>
* proxmox_kvm: added support for tmpstate
adds hash of options for a TPM state disk, which is required for Windows 11 installations
* updated wrong version in docs
* bump version 7.1.0 -> 7.1.1
* fixed parameter name typo
* updated to pass sanity; assumed version_added to be next major (7.2.0)
* replaced 'tpmstate' with 'tpmstate0'; added suboptions to kvm_args
* fixed line too long
* use get() instead of pop() to preserve verbose invocation.module_args
* update comment to include tpmstate0
* added changelog fragment
* Revert "bump version 7.1.0 -> 7.1.1"
This reverts commit 772ed98dba.
* Include PR link in changelog fragment
Co-authored-by: Felix Fontein <felix@fontein.de>
* Corrected version_added
Co-authored-by: Felix Fontein <felix@fontein.de>
* corrected semantic markup for option name
Co-authored-by: Felix Fontein <felix@fontein.de>
* set suboptions of tpmstate0 to required
* set default for tpmstate0.version (2.0)
* fixed typo
Co-authored-by: Felix Fontein <felix@fontein.de>
* wrapped default version string in quotes
Co-authored-by: Felix Fontein <felix@fontein.de>
* Improve changelog formatting.
---------
Co-authored-by: Felix Fontein <felix@fontein.de>
* Expose timeout param to stopped state
Forcefully stop virtual machine using timeout param for proxmox vm
shutdown api call.
* Add changelog fragment
* Typo fix in timeout param description
* Update changelogs/fragments/6570-handle-shutdown-timeout.yaml
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/proxmox_kvm.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Revert back exception message
---------
Co-authored-by: Felix Fontein <felix@fontein.de>
* ini_file: Don't creates new file instead of following symlink
This is a bug fix that address a situation where `community.general.ini_file`
was destroying symlinks instead of updating of updating their targets.
Closes: #6470
* ini_file: add the follow parameter
If `poth` points on a symlink and `follow` is true, the `ini_file` plugin
will preserve the symlink and modify the target file.
* adjust the documentation of the new key
- yes/no -> true/false.
- new key will be introduced in 7.1.0.
- clean up the `state=link` part.
* vardict: easy hadling of module variables
* fix copyright year
* initial tests passing
* small adjustments
* add tests
* add to BOTMETA
* remove unused import pytest
* Update plugins/module_utils/vardict.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* minor refactor and documentation
* minor adjustments
* rename VarDict.var() to VarDict._var()
- plus add more docs
* fix method name in tests
---------
Co-authored-by: Felix Fontein <felix@fontein.de>
* plugins/inventory/cobbler: Add option to use system name for inventory hostname (#6492)
* plugins/inventory/cobbler: Add warning for systems with empty profiles
* disable sign-in check for macOS 12+
* move is_version_greater func outside class Mas
* fix formatting
* remove trailing whitespace
* make use of LooseVersion to compare versions
* update requirement description
Co-authored-by: Felix Fontein <felix@fontein.de>
* update requirement description link
Co-authored-by: Felix Fontein <felix@fontein.de>
* update constant of macOS version
Co-authored-by: Felix Fontein <felix@fontein.de>
* use updated constant
Co-authored-by: Felix Fontein <felix@fontein.de>
* update getting macOS version
Co-authored-by: Felix Fontein <felix@fontein.de>
* add changelog fragment
---------
Co-authored-by: Felix Fontein <felix@fontein.de>
* opkg: remove useless default value for force
* add changelog frag
* Update changelogs/fragments/6513-opkg-default-force.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* add to force param description
* typo
---------
Co-authored-by: Felix Fontein <felix@fontein.de>
* Don't require api_password when api_token_id is used in proxmox_tasks_info
* Add changelog fragment
* Fix casing.
---------
Co-authored-by: Felix Fontein <felix@fontein.de>
* added handling of zypper exitcode 102: ZYPPER_EXIT_INF_REBOOT_NEEDED - Returned after a successful installation of a patch which requires reboot of computer.
The exitcode 102 will be treated exactly like 0 by the module internally now, and the changed status will be reported correctly. However, since I preserve the rc 102 in the retvals to allow the playbook to react to the requested reboot, the task must still include a "failed_when: zypper_cmd.rc not in [0, 102]" to not fail in this case.
* removed trailing whitespaces
* added changelogs fragment
* Fix typo.
Co-authored-by: Alex <alexgubin@gmx.de>
* Add URL.
---------
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Alex <alexgubin@gmx.de>
They are useful only with RHN, which Red Hat discontinued many years
ago, and with Spacewalk 5, which is EOL for more than 3 years;
while they could be potentially used with Uyuni / SUSE Manager (fork of
Spacewalk 5), we have not heard about anyone using it in those setups.
Hence, deprecate these two modules, with their removal planned for
10.0.0 in case there are no reports about being still useful, and
potentially noone that steps up to maintain them.
* nmcli: added new module option 'slave_type' to allow create non-ethernet slave connections
* argument specs updated
* documentation updated
* examples updated
* added warning message when using type='bridge-slave'
* remove trailing whitespace
* Added warnings about rewrite 'slave-type' property when using type one of 'bond-slave', 'bridge-slave', 'team-slave'.
Added module fails when user sets contradicting values of 'slave-type' for types 'bond-slave', 'bridge-slave', 'team-slave'.
Returned back checking for types that can be a slave to assign 'master' and 'slave-type' properties.
* Extending list of slave-conn-types
* Update plugins/modules/nmcli.py
Version updated
Co-authored-by: Alexei Znamensky <103110+russoz@users.noreply.github.com>
* Update plugins/modules/nmcli.py
Updated documentation for `slave_type`
Co-authored-by: Alexei Znamensky <103110+russoz@users.noreply.github.com>
* Updated argspec's 'required_by' for 'master' property.
* Fixed mistake in property naming in module argspec.
* changelog fragment and module docs updated
* Validation of 'master', 'slave_type' options improved. (rebased)
* Validation of 'master' and 'slave_type' separated to special method.
* Wrote 6 tests for slave_type option behaviour
* Removed erroneously added property 'hairpin'
* Update version_added for 'slave_type'
Co-authored-by: Alexei Znamensky <103110+russoz@users.noreply.github.com>
* Update changelogs/fragments/473-nmcli-slave-type-implemented.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/nmcli.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Let master be without slave_type
---------
Co-authored-by: Alexei Znamensky <103110+russoz@users.noreply.github.com>
Co-authored-by: Felix Fontein <felix@fontein.de>
* dconf - Try to find a Python interpreter that has gi.repository.GLib
If we're invoked in a Python interpreter that doesn't have access to
`gi.repository.GLib`, try to find one that does and respawn the task
in that interpreter.
* ChangeLog fragment for #6491
* Update changelogs/fragments/6491-dconf-respawn.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* Simplify import code
* Get rid of ModuleNotFoundError
---------
Co-authored-by: Felix Fontein <felix@fontein.de>
* feat: Allow non-returning SQL statements
- The current implementation fails out when certain statements or
batches do not have resultsets - this limits the usefulness of the
module
- Instead, it is known that statements without resultsets return then
OperationalError exception with text "Statement not executed or
executed statement has no resultset". We will utilize these facts to
accept these statements
- The implementation also assumes that users will always use best-
practices for the script syntax; that is, "GO" will always be
capitalized but this is not strictly required -- update to allow "GO"
to be any mixed-case
Signed-off-by: Lesley Kimmel <lesley.j.kimmel@gmail.com>
* feat: Add changelog fragment for change
- Add changelog fragment for PR 6192
Signed-off-by: Lesley Kimmel <lesley.j.kimmel@gmail.com>
* feat: Improve batching
- Previous batching had shortcomings like making strict assumptions
about the format of the incoming script and did not handle Windows-
based scripts (e.g. \r characters). It also did not handle cases where
there were trailing or leading whitespace characters round the 'GO'
- Added a special case for removing the Byte Order Mark (BOM) character
that may come as part of a script when slurped from some hosts.
Signed-off-by: Lesley Kimmel <lesley.j.kimmel@gmail.com>
* feat: Use str.splitlines()
- Use of this method is cleaner
Signed-off-by: Lesley Kimmel <lesley.j.kimmel@gmail.com>
* Update changelogs/fragments/6192-allow-empty-resultsets.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* fix: Update transcribing errors
- Replace local namespace with project namespace
- Remove 'return' statement from the module.fail_json call
Signed-off-by: Lesley Kimmel <lesley.j.kimmel@gmail.com>
---------
Signed-off-by: Lesley Kimmel <lesley.j.kimmel@gmail.com>
Co-authored-by: Lesley Kimmel <lesleyk@vmware.com>
Co-authored-by: Felix Fontein <felix@fontein.de>
This fix ensures that in case of a project quota, the corresponding project gets initialized, if required.
Signed-off-by: Christoph Fiehe <c.fiehe@eurodata.de>
Co-authored-by: Christoph Fiehe <c.fiehe@eurodata.de>
* gconftool2: fix change output
* add changelog frag
* gconftool2: improve visibility on the output
* fix obtaining updated value after `set`
* use issue URL in the changelog fragment
* fix further issues
* fix return value docs + changelog frag
* Update plugins/modules/gconftool2.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* fix return value doc
---------
Co-authored-by: Felix Fontein <felix@fontein.de>
Using ``withbdeps: false`` was causing the underlying emerge command to
fail due to not passing an argument to the ``--with-bdeps`` flag. Fix
by updating the logic for generating the emerge command arguments to
ensure that ``withbdeps: false`` results in a passing an ``n`` argument
with the ``--with-bdeps`` emerge flag.
* office_365_connector_card: Remove references to dev.outlook.com
Remove references to the deprecated dev.outlook.com and update them to the relevant learn.microsoft.com links.
Closed#6262
* Fix PEP 8 line length issue
* Apply suggestions from PR review
* Update plugins/modules/office_365_connector_card.py
Co-authored-by: Felix Fontein <felix@fontein.de>
---------
Co-authored-by: Felix Fontein <felix@fontein.de>
* Add keycloak_authz_authorization scope module
This module allows managing Keycloak client authorization scopes. The client has
to have authorization enable for this to work.
* botmeta: make mattock maintainer of keycloak_authz_authorization_scope
* botmeta: add mattock to team_keycloak
* keycloak_authz_authorization_scope: documentation and code layout fixes
* keycloak_authz_authorization_scope: do not fail on names with whitespace
* keycloak_authz_authorization_scope: use url quote method
Co-authored-by: Felix Fontein <felix@fontein.de>
* keycloak_authz_authorization_scope: style fixes to documentation
* keycloak_authz_authorization_scope: do not claim check/diff mode support
* keycloak_authz_authorization_scope: fix documentation
* keycloak_authz_authorization_scope: support check_mode and diff_mode
* keycloak_authz_authorization_scope: use more common terminology
Most keycloak modules use before_<object_type> and desired_<object_type> to
designate current and desired states of objects. Do the same for authorization
scopes.
* keycloak_authz_authorization_scope: fixes to check_mode and docs
---------
Co-authored-by: Felix Fontein <felix@fontein.de>
* udm_dns_record: minor refactor
* remove unused import
* improve ptr_record zone validation
* add changelog frag
* undo zone validation change as it breaks for IPv6 addresses
* keycloak: Improve API error message
* keycloak: Fix API error message
They key 'provider' is undefined.
* keycloak: Allow the creation of 'form-flow' authentication sub flows
To create something like keycloak's built-in registration flow,
we need to create a subflow with the type 'form-flow'.
* Add changelog fragment 6318
* Update changelogs/fragments/6318-add-form-flow.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/keycloak_authentication.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/keycloak_authentication.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* keycloak_authentication: Don't compare subFlowType
It is only useful for creation.
* Update changelogs/fragments/6318-add-form-flow.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
---------
Co-authored-by: Felix Fontein <felix@fontein.de>
* pipx and pipx_info: Document that modules require pipx 0.16.2.1 or above
Since their introduction, these modules rely on 'pipx list --json' to
return machine-readable output about installed pipx applications. That
functionality was introduced in 0.16.2, along with a critical bug fix
(invalid json) in 0.16.2.1.
* pipx: fix state=latest with install_deps=true
"pipx upgrade" stopped supporting the "--include-deps" option
("install_deps" in the ansible module) in pipx 0.15
(https://pypa.github.io/pipx/changelog/#01500).
The lack of support causes the pipx module to fail if attempting to use
state=latest with install_deps, since the parameter is passed to both
pipx install (fine) and pipx upgrade (fails).
* Add changelog fragment
* Initial implementation for new modules btrfs_subvolume and btrfs_info
* Improve/flesh out documentation. Add ability to target filesystem by uuid, label or device. Update tests to test targeting filesystem by each supported parameter and when only mountpoint.
* Updates for btrfs modules. Add missing copyright notices. Switch options to contains in return documentation. Update btrfs_subvolume to always use closest parent mount.
* Add maintainers for btrfs module(s) and remove unused class member cause lint failure.
* Add changelog fragment. Attempt to only run against the VMs as part of CI.
* Updates per code review. Remove changelog fragment. Switch use of map to list comprehension. Add trailing comma to last item in multi-line dicts. Clean up documentation with complete senstences for descriptions and correct/consistent use of macros.
* Improved error handling in btrfs_subvolume module: add custom exception type, favor exceptions over immediate call to fail_json and add single top level return for failure scenarios. Normalize name and snapshot_source parameters early in module execution and remove unecessary duplicate normalization throughout processing.
* Add azp/posix/3 to aliases per feedback
* Clean up automatic mounting. Prevent automount when check_mode=True. Immediately fail if a mount is identified as required and automount=True. Identify the minimal subset of subvolumes that need to be mounted instead of just finding a single common root.
* Skip btrfs_subvolume integration tests if btrfs-progs isn't successfully installed.
* Bump version_added for btrfs modules to 6.6.0. Ensure consistent trailing punctuation for module descriptions and document check_mode behavior as attribute description rather than a module level note.
* Remove unused imports from btrfs_subvolume module.
* Fix import.
* Docs improvements.
---------
Co-authored-by: Felix Fontein <felix@fontein.de>
* icinga2_host: make use of templates, append vars instead of replacing all vars array.
* Initialize `template` variable. Add changelog fragment.
* Update changelogs/fragments/6286-icinga2_host-template-and-template-vars.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
---------
Co-authored-by: Felix Fontein <felix@fontein.de>
* Redfish iDRAC: Added job_id to response for CreateBiosConfigJob
Signed-off-by: Mike Raineri <michael.raineri@dell.com>
* YAML fix to changelog fragment
Signed-off-by: Mike Raineri <michael.raineri@dell.com>
---------
Signed-off-by: Mike Raineri <michael.raineri@dell.com>
* dig: Support multiple domains in a single lookup (#6334)
The docs for this plugin indicated that multiple domains could be
specified at once, but the code did not support multiple domains.
* Address review feedback.
* one_vm: fix syntax error when creating VMs with a more complex template
with more complex templates that make use of quoted strings the new
"render" method fails to produce a template that is accepted by
OpenNebula. ==> escape double quotes in strings to make OpenNebula
happy again.
I also tested whether newlines need to be escaped, looks like they are
fine as they are.
Fixes#6225
* module_utils/opennebula: skip empty values in render
* add nmcli macvlan type
* changelog
* improve docs
* macvlan params
* fix linter and improve module params
* improve_docs
* raise error if type macvlan and macvlan options not set
It turns out that the 'environments' that the D-Bus Register*() APIs
accept are the IDs of the environments, and not the user-facing names of
the environments (which is what the module has been accepting so far).
Since there is no easy way to do the mapping manually, for now use again
the subscription-manager CLI for registering when environments are
specified.
* remote state file exists check
In the official CLI implementation of Terraform, if the state file does not exist, a new one will be created, and there is no need to check that the state file already exists and with an error if file not exists.
```bash
# Test command
terraform apply -state test.tfstate. # if state file not exists ,terraform will create a new one
terraform destroy -state test1.tfstate ### Terraform will not throw any error, the command will succeed execute, only report no resource has destroy
```
* Update terraform.py
add 1 blank line to function end
* Create 6296-LanceNero-Terraform_statefile_check
remove file exists check (https://github.com/ansible-collections/community.general/pull/6296)
* resolve if case issue
* Add blank line
* Update 6296-LanceNero-Terraform_statefile_check
* Update changelogs/fragments/6296-LanceNero-Terraform_statefile_check
Co-authored-by: Alexei Znamensky <103110+russoz@users.noreply.github.com>
* update code style
Co-authored-by: Alexei Znamensky <103110+russoz@users.noreply.github.com>
* Update suffix to correct CI issue
* Update Code Style
* Update bug-fix to feature release
---------
Co-authored-by: Alexei Znamensky <103110+russoz@users.noreply.github.com>
* dconf: Correctly handle setting a key that has no value in DB
We need to check if the value in the database is None before we try to
parse it, because the GVariant parser won't accept None as an input
value. By definition if the value is None, i.e., there's no value in
the database, than any value the user is trying to set is a change, so
just indicate that it's a change without trying to compare the None to
whatever the user specified as the value.x
* dconf: Give a more useful error when writing a key fails
if writing a key fails, then include in the error that is returned the
exact key and value aguments that were given to the dconf command, to
assist in diagnosing failures caused by providing the key or value in
the wrong format.x
* dconf: Convert boolean values into the format that dconf expects
Even though we warn users to be careful to specify GVariant strings
for values, a common error is to be trying to specify a boolean string
which ends up getting converted into a boolean by the YAML parser or
Ansible. Then it gets converted to "True" or "False", the string
representations of Python booleans, which are not valid GVariants.
Rather than just failing with an obscure error when this happens,
let's be more user-friendly and detect when the user has specified a
boolean and convert it into the correct GVariant forms, "true" or
"false", so it just works. There's no good reason to be more pedantic
than that.
* Add Puppet skip_tags option
* Include changelog fragment
* Apply suggestions from code review
Co-authored-by: Felix Fontein <felix@fontein.de>
---------
Co-authored-by: Felix Fontein <felix@fontein.de>
* archive: Generate crc32 over 16MiB chunks
Running crc32 over the whole content of the compressed file potentially
requires a lot of RAM. The crc32 function in zlib allows for calculating
the checksum in chunks. This changes the code to calculate the checksum
over 16 MiB chunks instead. 16 MiB is the value also used by
shutil.copyfileobj().
* Update changelogs/fragments/6199-archive-generate-checksum-in-chunks.yml
Change the type of change to bugfix
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update changelogs/fragments/6199-archive-generate-checksum-in-chunks.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
---------
Co-authored-by: Felix Fontein <felix@fontein.de>
Factorize the current logic to determine whether use 'environments' as
D-Bus registration option (rather than 'environment') in an own
function, so it is easier to read it and maintain it.
With the small helper function in place, extend the logic to support
CentOS: it is in practice the same as the RHEL one, with an additional
check to support CentOS Stream 8 (which is a rolling release, and not
versioned).
When registering using D-Bus and using a version of subscription-manager
with an unimplemented 'force' option, then unregister manually the
system only if it is registered. 'subscription-manager unregister'
errors out when trying to unregister an already unregistered system.
* pipx: Document parameters supported with state=latest
* pipx: Support "include_injected" with states "upgrade" and "latest"
- Contrary to documentation, "include_injected" doesn't appear to have
worked with state=upgrade since it was introduced.
- Add support for include_injected with "latest", since "latest" is
specified as being install+upgrade.
* Add changelog fragment
* Update plugins/modules/pipx.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update changelog fragment
Co-authored-by: Felix Fontein <felix@fontein.de>
* pipx: Update to correct target release of community.general
---------
Co-authored-by: Felix Fontein <felix@fontein.de>
* Add module to manipulate KDE config files using kwriteconfig
* Fix license issues
* Apply suggestions from code review
Co-authored-by: Felix Fontein <felix@fontein.de>
* Add smeso as kdeconfig.py maintainer
* Fix attributes fragment name
* Fix test
* Do not use shutil.chown
It isn't available on old Python versions
* Apply suggestions from code review
Co-authored-by: Felix Fontein <felix@fontein.de>
---------
Co-authored-by: Felix Fontein <felix@fontein.de>
* Added call method to select proper response from xo server
* Added changelog fragment
* Removed excess blank lines
* Moved period in changelog fragment
* Made suggested changes
* Remove f-strings for Python 2.7 compatibility
Co-authored-by: Felix Fontein <felix@fontein.de>
---------
Co-authored-by: Linus Kirkwood <lkirkwood@allette.com.au>
Co-authored-by: Felix Fontein <felix@fontein.de>
* nmcli: fixed idempotency issue with 'may_fail4' when 'method' is 'disabled'
* added note to documentation
* updated changelog fragment
* Update changelog fragment.
---------
Co-authored-by: Felix Fontein <felix@fontein.de>
* add runner_fast_rate option
* unset default value for runner_fast_rate parameter
* add some commas
* Remove default in copy of argspec.
Co-authored-by: Sam Potekhin <eax24@ya.ru>
---------
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Sam Potekhin <eax24@ya.ru>
* pipx: Allow injected modules to add apps
Add support for pipx inject's "--include-apps" parameter.
* add changelog fragment
* fix pipx test ("install_apps", not "include_apps")
* fix pipx test -- add a second invocation for install_apps
* Update changelogs/fragments/6198-pipx-inject-install-apps.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/pipx.py
Co-authored-by: Felix Fontein <felix@fontein.de>
---------
Co-authored-by: Felix Fontein <felix@fontein.de>
* feat(ssh_config): proxyjump option
* feat(ssh_config: add proxyjump test
* CamelCase ProxyJump
* add changelog fragment
* Update plugins/modules/ssh_config.py
add version_added
Co-authored-by: Felix Fontein <felix@fontein.de>
* update task name to include new proxyjump option
* adding tests for proxyjump option
* fixing assert variable name
---------
Co-authored-by: Felix Fontein <felix@fontein.de>
We simply add a param to allow proxmox administrator to restore VM from
an archives. This new option will be useful to automate automatic
creation and restore of VM.
Co-authored-by: Julian Vanden Broeck <julian.vandenbroeck@dalibo.com>
* clean performs apt-get clean.
* dist_upgrade performs apt-get dist-upgrade.
* update_kernel performs update-kernel to upgrade kernel packages.
* update_cache, clean, dist_upgrade and update_kernel can be used with and without specified packages.
The module currently has a static 'required_if' statement for its
parameters that forces any of 'username' or 'activationkey' or 'token'
in case state=present; while this is generally a good idea, it can be
an extra requirements in some cases. In particular, if the system is
already registered, there is no need for credentials -- some of the
operations of the module, such as manipulating pools, can be done
perfectly without credentials.
Hence:
- change the static 'required_if' to require credentials only when
forcing the registration
- check for credentials manually when a registration is needed, i.e.
on an unregistered system; the fail message is the same as the one
shown by 'required_if'
Adapt the tests to this new situation:
- test_without_required_parameters now needs to mock an unregistered
system
- add a new version of test_without_required_parameters to test an
already registered system
- add a simple test case for only state=present usable on an already
registered system
- remove the credentials from a test case for pool attachment that
mocks an already registered system
subscription-manager on RHEL installs a symlink in /usr/bin to
console-helper (part of usermode), which triggers an interactive prompt
for root credentials when run as user. It seems that console-helper
does not handle well non-interactive contexts (e.g. without a TTY for
input), and thus it will hang waiting for input when run as user in an
Ansible task.
Since subscription-manager requires root already anyway (and it will
fail when explicitly run as user), then apply the same logic locally on
all the modules that interact with it: redhat_subscription,
rhsm_release, and rhsm_repository.
* Replace deprecated error with BadZipFile
* Use imported BadZipFile
Co-authored-by: Felix Fontein <felix@fontein.de>
* Add news fragment
* Update new fragment
Co-authored-by: Felix Fontein <felix@fontein.de>
---------
Co-authored-by: Felix Fontein <felix@fontein.de>
* Fix influxdb_user grants in check mode
When running in check mode, `influxdb_user` will return error when the user doesn't exist yet, instead of reporting `changed` state.
* Update changelogs/fragments/6111-influxdb_user-check-mode.yaml
Co-authored-by: Felix Fontein <felix@fontein.de>
---------
Co-authored-by: Felix Fontein <felix@fontein.de>
* Adding support for `-p` option to specify port(s) to scan
* Adding changelog fragment file
* Corrected appending options
* Edit to doc section
* Correction in documentation type
* Fixed `:` use in doc breaking yaml
* Update changelogs/fragments/6165-nmap-port.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/inventory/nmap.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/inventory/nmap.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Adding usage example
* Adding comment to example that was missed
* Breaking line up, was too long for sanity test 160 char limit
* Still too long since spaces are counted
* Changed type to string to work for a single entry as well as comma separated values
* Update changelogs/fragments/6165-nmap-port.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/inventory/nmap.py
Co-authored-by: Felix Fontein <felix@fontein.de>
---------
Co-authored-by: Felix Fontein <felix@fontein.de>
* openbsd_pkg: set TERM to 'dumb' in execute_command
Keeps pkg_add happy when someone running ansible is using a TERM that
the managed OpenBSD host does not know about.
Fixes#5738.
Selection of specific TERM from discussion at
https://marc.info/?l=openbsd-tech&m=167290482630534&w=2
* Add changelog fragment for openbsd_pkg TERM fix
* Update changelogs/fragments/6149-openbsd_pkg-term.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
---------
Co-authored-by: Felix Fontein <felix@fontein.de>
* Updating yarn.list to not fail when when warnings are emitted
* Adding changelog fragment
* Adding _process_yarn_error function
* - Adding back changes to the changelog fragment
- Fixing formatting
* Fix trailing whitespace
* Update plugins/modules/yarn.py
Co-authored-by: Felix Fontein <felix@fontein.de>
---------
Co-authored-by: Felix Fontein <felix@fontein.de>
subscription-manager currently does not have a way to get credentials
(username, password, activation keys, organization ID) in a secure way:
the existing command line parameters can be easily spotted when running
a process listing while 'subscription-manager register' runs.
There is a D-Bus service, which is used by e.g. cockpit and Anaconda to
interface with RHSM (at least for registration and common queries).
Try to perform the registration using D-Bus, in a way very similar to
the work done in convert2rhel [1] (with my help):
- try to do a simple signal test to check whether the system bus works;
inspired by the login in the dconf module
- pass most of the options as registration options; for the few that are
not part of the registration, execute 'subscription-manager' manually
- add quirks for differently working (or not) registration options for
the D-Bus Register*() methods depending on the version of RHEL
- 'subscription-manager register' is used only in case the signal test
is not working; silent fallback in case of D-Bus errors during the
registration is not done on purpose to avoid silent fallback to a less
secure registration
[1] https://github.com/oamg/convert2rhel/pull/540/
It may happen operator wants to get the built command instead of all the
parameters. This change injects a new entry in the dict output, showing
what command way actually launched.
This patch also takes the opportunity to add missing dots to some
documentation lines.
This change reorder the parameters so that we get the mandatory one at
the top, then alphabetically order the other bellow.
It also adds the returned values.
dconf: parse GVariant values to check for equality whenever possible
Direct string comparisons are an inaccurate way to compare two
GVariant representations. For example, 'foo' and "foo" (including the
quote marks, which are part of the representation) are equal GVariants
but if you just do a string compare (remember, including the quotes)
they'll be interpreted.
We therefore want to use the `gi.repository` Python library to parse
GVariant representations before comparing them whenever possible.
However, we don't want to assume that this library will always be
available or require it for Ansible to function, so we use a straight
string comparison as a fallback when the library isn't available. This
may result in some false positives, i.e., Ansible thinking a value is
changing when it actually isn't, but will not result in incorrect
values being written into `dconf`.
Co-authored-by: Jonathan Kamens <jik@jik5.kamens.us>
The fix ensures that no 'KeyError' is raised, when 'access_level' is not provided as module parameter or when 'access_level_on_creation' is false.
Signed-off-by: Christoph Fiehe <c.fiehe@eurodata.de>
Co-authored-by: Christoph Fiehe <c.fiehe@eurodata.de>
This fixes the following warning on FreeBSD:
[WARNING]: The "jail" connection plugin has an improperly configured
remote target value, forcing "inventory_hostname" templated value
instead of the string
* add persistent option for modprobe
* add suggested changes + fix broken test
* change modprobe module path in tests due to rebase
* change persistent option type from bool to str with choices
* fix unused import
* add example with persistent option
* fix some minor issues after review
- move regexps compiling to __init__
- move AnsibleModule to build_module function and use this function in tests instead of AnsibleModule
- fix terminlogy issue in documentation
* fix unused-import
* Add new project features to API
* add changelog fragment
* remove extra line from changelog
* Update changelog formatting
Co-authored-by: Felix Fontein <felix@fontein.de>
---------
Co-authored-by: Felix Fontein <felix@fontein.de>
* sefcontext: add path substitution support (#1193)
First commit for feedback, missing docs and tests.
* sefcontext: add documentation
* Add changelog fragment
* Documentation formatting
* Delete extra newline
* pep8 fixes
Fix indentation
* Add version_added to arg docs
* Add examples
* Don't delete non-matching path substitutions
* Add integration tests
* Delete only substitutions if such arg passed
Don't delete existing regular file context mappings if deletion of
a path substitution was requested with the presence of the
`equal` arg - delete only path substitutions in such case.
Path substitutions and regular mappings may overlap.
* Can only add args in minor releases
:(
* Cleanup before tests
* Fix deletion using substitution
Was comparing wrong var.
* Fix test checking wrong var
* Improve args documentation and examples
List the default values for selevel, seuser.
Add example for deleting path substitutions only.
* Add attributes documentation block
Not sure if should add become/delegate/async,
shouldn't those work just like that without any
specific code added for them?
* and fix indentation on attribute block
* Consistent indentation for attributes
Confusing, most plugins indent with 4 spaces.
But some use 2 like the rest of the code, so use 2.
* Add missing ref for attribute block
* Use correct c.g version in doc block
Co-authored-by: Felix Fontein <felix@fontein.de>
* Add full stop to changelog fragment
Co-authored-by: Felix Fontein <felix@fontein.de>
* Streamline documentation
Co-authored-by: Alexei Znamensky <103110+russoz@users.noreply.github.com>
* Support limiting deletion to setype
Deleting file context mappings may be limited by
passing setype or equal, if neither arg is passed
then delete either setype/equal mappings that match.
* Change arg name, diff mode output fix
Change arg name from equal to substitute.
Print target = subsitute in diff mode same way as
semanage does.
Also put back platform attribute, try to improve
clumsy language in the substitute arg docs.
* Delete even if arg setype not match existing
Test 5 indicates that deletion is supposed to not check that
the arg setype passed when deleting matches the setype
of the mapping to delete.
Delete any mapping that matches target, regardless of
setype arg value.
* Update arg name in tests
* Too eager replacing
Accidentally replaced seobject function names so fix them back
* 4564: Fix invalid setype in doc example
Change from httpd_git_rw_content_t which
does not exist to httpd_sys_rw_content_t
Fixes#4564
* Fix documentation attributes
Additional fragment
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update version_added in docs
Bumping minor to 6.4.0 since it didn't make 6.3.0.
* Add more description to the new arg docs
Try to improve discoverability of the new feature and make it easier to understand without deep SELinux understanding.
* Update platform to Linux in documentation
* Add equal as alias for the new argument
Improve discoverability of the new feature by adding an alias to the new module argument. The argument name "equal" will be easy to find for users who are not familiar with SELinux and who just try to match to the CLI tool `semanage`.
* And add alias argument properly
Previous commit missed actually adding the alias (added to docs only).
---------
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Alexei Znamensky <103110+russoz@users.noreply.github.com>
* cloudflare_dns: Fix setting SRV records with a root level entry
* cloudflare_dns: Remove the part which deletes the zone from the SRV record name
The cloudflare API accepts the record name + zone name to be sent. Removing that, will guarantee the module to be idempotent even though that line was added ~7 years ago for that specific reason: 7477fe5141
It seems the most logical explanition is that Cloudflare changed their API response somewhere over the last 7 years.
* cloudflare_dns: Update the changelog fragment
* stop passing loader/dataloader since it has been deprecated by ansible
Signed-off-by: Martin Schurz <Martin.Schurz@t-systems.com>
* add changelog fragment
Signed-off-by: Martin Schurz <Martin.Schurz@t-systems.com>
* explicitly pass None to keep compatibility to older Ansible versions
Signed-off-by: Martin Schurz <Martin.Schurz@t-systems.com>
* use try/except to keep things compatible
Signed-off-by: Martin Schurz <Martin.Schurz@t-systems.com>
* Update plugins/lookup/cartesian.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/lookup/flattened.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/lookup/flattened.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/lookup/cartesian.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update changelogs/fragments/6074-loader_in_listify.yml.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
---------
Signed-off-by: Martin Schurz <Martin.Schurz@t-systems.com>
Co-authored-by: Felix Fontein <felix@fontein.de>
* feat(module/keycloak_group): add support for ...
... handling subgroups
* added changelog fragment and fixing sanity ...
... test issues
* more sanity fixes
* fix missing version and review issues
* added missing licence header
* fix docu
* fix line beeing too long
* replaced suboptimal string type prefixing ...
... with better subdict based approach
* fix sanity issues
* more sanity fixing
* fixed more review issues
* fix argument list too long
* why is it failing? something wrong with the docu?
* is it this line then?
* undid group attribute removing, it does not ...
... belong into this PR
* fix version_added for parents parameter
---------
Co-authored-by: Mirko Wilhelmi <Mirko.Wilhelmi@sma.de>
* github_webhook: Don't include secret in the config if it's absent
* Add changelogs
* Fix indentation
* Apply suggestion to simplify the check
Co-authored-by: Felix Fontein <felix@fontein.de>
---------
Co-authored-by: dima1206 <32818228+dima1206@users.noreply.github.com>
Co-authored-by: Felix Fontein <felix@fontein.de>
When setting allow permissions for particular users or groups
there will be circumstances when that user is not known to the
host system.
In that case the output of `zfs allow <pool/dataset>`
looks similar to this:
$ sudo zfs allow tank/test
---- Permissions on tank/test ---------------------------------------
Local+Descendent permissions:
user (unknown: 1002) hold
user zfsuser receive
The fix in this commit removes ' (unknown: '+')' from the output
leaving only the uid/gid.
This allows the current parser to continue even if the uid/gid
is not known.
This situation occurs most often when moving a zpool from one system
to another that may not have the same users/groups. Simply adding
permissions to a user/group and then deleting the user/group
from the system will cause this situation to occur.
* nmcli: Treat order as significant when comparing address lists
Don't sort the old and new values for ipv4.addresses and
ipv6.addresses before comparing them, because order matters in these
parameters: the first address specified is the default source address
for outbound connections.
* Changelog fragment for #6048
* Update changelogs/fragments/6048-nmcli-addres-order.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
---------
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update osx_defaults documentation examples
* Include stderr in errors from osx_defaults
* Add Changelog Fragment
* Update changelogs/fragments/6011-osx-defaults-errors.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* Change format of examples
* Update plugins/modules/osx_defaults.py
Co-authored-by: Felix Fontein <felix@fontein.de>
---------
Co-authored-by: Felix Fontein <felix@fontein.de>
* feat(modules/keycloak_user_federation): mapper ...
... provider type should have a default value
* add changelog fragment
---------
Co-authored-by: Mirko Wilhelmi <Mirko.Wilhelmi@sma.de>
* fix(zypper): Added condition to check for transactional-update binary to support microos
closes#5615
* style(changelog): Made zypper-change uppercase
Co-authored-by: Felix Fontein <felix@fontein.de>
* fix(zypper): Removed check for /var/lib/misc/transactional-update.state
* feat(zypper): Aligned transactional-update checks with zypper's
* refactor(zypper): Removed dependency to psutil and made use of parsing /proc/mount
* refactor(zypper): Removed need for regex, plus small refactoring
---------
Co-authored-by: André Dörscheln <ad@itesign.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* nmcli: Convert current value of wifi.wake-on-wlan before comparing
The new value of wifi.wake-on-wlan is specified as an integer, but in
the nmcli output it's specified as a hex string followed by a textual
description of it. Therefore, to determine properly whether it's being
changed we need to pull the hex string out of the current value,
convert it into an integer, and finally convert the integer back to a
string so that we can compare it to the new specified value. Without
this change, whenever wifi.wake-on-wlan is specified in the module
arguments the module will think the value is being changed even when
it isn't.
* nmcli: Handle wifi options correctly when connection type not specified
When an nmcli task does not specify the connection type and the module
ask nmcli for it, the module needs to convert nmcli's
`802-11-wireless` to `wifi`, the term for this connection type used by
the module.
* nmcli: Correctly detect values changed to the integer 0
If the user specifies a value of 0 (without quotes) in a task, we
should interpret that as an actual value, not empty, when comparing
the new value to the old one. Otherwise we incorrectly conclude that
there was no change.
* Changelog fragment for #5431
* Add plugin parser functionality to JC Filter Plugin
The parse function was added in jc v1.18.0 which allows plugin parsers to be used. This change will try the new API if available, else fallback to the old API so there is no change in behavior.
* remove whitespace from blank line
* Add changelog fragment for JC plugin parser support
* add .yml extension to file name
* Formatting
* add period at end
* Add attributes to more modules.
* Adjust indentation.
Co-authored-by: Kristian Heljas <11139388+kristianheljas@users.noreply.github.com>
---------
Co-authored-by: Kristian Heljas <11139388+kristianheljas@users.noreply.github.com>
* Add attributes to more modules.
* Apply suggestions from code review.
Co-authored-by: Kristian Heljas <11139388+kristianheljas@users.noreply.github.com>
---------
Co-authored-by: Kristian Heljas <11139388+kristianheljas@users.noreply.github.com>
* Set the user-agent for API requests to DNSimple
* Update user agent format
* Add changelog fragment
* Update changelogs/fragments/5927-set-user-agent-dnsimple.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
---------
Co-authored-by: Felix Fontein <felix@fontein.de>
* Yarn module: fix state=latest not working with global=true
* fix whitespace
* add changelog fragment
* add integration test cases
* add only tests for this PR (install+upgrade)
* fix assuming default global dir
* fix list() not working when global=true and name a package with no binary
* remove ignores
* whitespace
* Update changelogs/fragments/5829-fix-yarn-global.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update changelogs/fragments/5829-fix-yarn-global.yml
Co-authored-by: Alexei Znamensky <103110+russoz@users.noreply.github.com>
---------
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Alexei Znamensky <103110+russoz@users.noreply.github.com>
* Suppress urllib3 InsecureRequestWarnings when validate_certs option is false
Suppress urllib3 InsecureRequestWarnings when `validate_certs` option is false.
It's clear that the user would know the possible risk when he or she chose to turn off the option, so the warning message could be ignored and make the output clean.
* Create 5915-suppress-urllib3-insecure-request-warnings.yml
* Update changelogs/fragments/5915-suppress-urllib3-insecure-request-warnings.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
* Remove extra whitespaces
---------
Co-authored-by: Felix Fontein <felix@fontein.de>
