* Catch SSH authentication errors and don't retry multiple times to prevent account lock out
Signed-off-by: Sam Doran <sdoran@redhat.com>
* Subclass AnsibleAuthenticationFailure from AnsibleConnectionFailure
Use comparison rather than range() because it's much more efficient.
Signed-off-by: Sam Doran <sdoran@redhat.com>
* Add tests
Signed-off-by: Sam Doran <sdoran@redhat.com>
* Make paramiko_ssh connection plugin behave the same way
Signed-off-by: Sam Doran <sdoran@redhat.com>
* Add changelog
Signed-off-by: Sam Doran <sdoran@redhat.com>
This reverts commit c649d0ea32.
The change results in deadlock in network_cli while it is
waiting to check the return value of recv_ready() which
was added in this commit to improve performance
* Fix prompt mismatch issue for ios
Fixes#40884#44463
* If the command prompt is matched check if data is
still pending to be read from buffer.
* This fix adds a new timer `buffer_read_timeout`
which will be trigerred after command prompt
is matched and data is attempted to be read from channel.
If not data is present of channel the timer will expire
and response we be returned to calling function.
* Fix unit test failure
* Update to make buffer timeout float
* Update doc and fix review comment
* Fix CI issues
* Update doc
* Fix review comments
* Fix review comments
* Move ansible.compat.tests to test/units/compat/.
* Fix unit test references to ansible.compat.tests.
* Move builtins compat to separate file.
* Fix classification of test/units/compat/ dir.
* Try to intuit proper plugins to send to ansible-connection
* Move sub-plugins to init so that vars will be populated in executor
* Fix connection unit tests
* win_reboot: fix 2.6 issues and better handle post reboot reboot
* changed winrm _reset to reset
* Add handler to reset calls when .reset() throws an AnsibleError on older hosts
* Moving back to _reset to get the issue fixed
* Create base class for network-style connections
* clean up some differences
* Move NetworkConnectionBase
* Tweak netconf for tests
* Tweak when network_os is checked to avoid failing tests
* Pull back exec_command
* winrm: add better exception handling for krb5 auth with pexpect
* Added changelog fragment
* Added exception handler in case kinit path isn't valid, added test cases
* fixed for Python 2 compatibility
* WIP Pull persistent connection parameters via get_option
* Fix pep8
* Add use_persistent_connection setting to paramiko_ssh plugin
* Add vars section to persistent_command_timeout setting and prevail provider values over config manager
* Use persistent_command_timeout on network_cli instead of timeout
* Fix unit tests
If we don't call loader to get network_cli, then _load_name is never
set and we get KeyError.
* Pull persistent_command_timeout via config manager for ios connection local
* Pull persistent_command_timeout via config manager on connection local
* Allow the user to circumvent adding -tt on ssh commands to help aid in
debugging ssh related problems.
* Move config to the plugin
* Set version_added
* Change yaml section to "connection"
* Fix ssh unit tests
* included inventory and callback in new config
allow inventory to be configurable
updated connection options settings
also updated winrm to work with new configs
removed now obsolete set_host_overrides
added notes for future bcoca, current one is just punting, it's future's problem
updated docs per feedback
added remove group/host methods to inv data
moved fact cache from data to constructed
cleaner/better options
fix when vars are added
extended ignore list to config dicts
updated paramiko connection docs
removed options from base that paramiko already handles
left the look option as it is used by other plugin types
resolve delegation
updated cache doc options
fixed test_script
better fragment merge for options
fixed proxy command
restore ini for proxy
normalized options
moved pipelining to class
updates for host_key_checking
restructured mixins
* fix typo
* implements jsonrpc message passing for ansible-connection
* implements more generic mechanism for persistent connections
* starts persistent connection in task_executor if enabled and supported
* supports using network_cli as top level connection plugin
* enhances logging for persistent connection to stdout
* Update action plugins
* Fix Python3 RPC
* Fix Junos bytes<-->str issues
* supports using netconf as top level connection plugin
* Error message when running netconf on an unsupported platform
* Update tests
* Fix `authorize: yes` for `connection: local`
* Handle potentially JSON data in terminal
* Add clarifying detail if possible on ConnectionError
1fe67f9 introduced retries to the ssh connection put file and fetch
file. Unfortunately, that change broke the smart transport because it
started raising exceptions instead of returning from _run(). This
breakage is documented in #23711.
An attempt to fix it was made at #23717 but the first attempt was
objected to as needing to touch too much code. The second attmept was
objected to as smart was forced to encapsulate retries (thus retrying
a sftp "rety" times before trying scp "retry" times and then finally
moving onto piped). This third attempt has retries encapsulate smart.
So each sub-transport is tried once and if all three fail, another retry
attempt is made which tries each of the three again.
Fixes#23711Fixes#23717
* test/: PEP8 compliancy
- Make PEP8 compliant
* Python3 chokes on casting int to bytes (#24952)
But if we tell the formatter that the var is a number, it works
* eos python3 changes
* changes to convert response from byte to text
* Add dellos6 python3 changes
Make `execute_command` arguments and its
return value complaint to PY3 changes
made in PR #24431
* Fix py3 prompt issue for invalid show command
* Fix review comments
* Add generic fix for error prompt in py3
* Fix CI issue
* Fix network_cli unit test failure
Fix for persistent connection plugin on Python3. Note that fixes are also needed to each terminal plugin. This PR only fixes the ios terminal (as proof that this approach is workable.) Future PRs can address the other terminal types.
* On Python3, pickle needs to work with byte strings, not text strings.
* Set the pickle protocol version to 0 because we're using a pty to feed data to the connection plugin. A pty can't have control characters. So we have to send ascii only. That means
only using protocol=0 for pickling the data.
* ansible-connection isn't being used with py3 in the bug but it needs
several changes to work with python3.
* In python3, closing the pty too early causes no data to be sent. So
leave stdin open until after we finish with the ansible-connection
process.
* Fix typo using traceback.format_exc()
* Cleanup unnecessary StringIO, BytesIO, and to_bytes calls
* Modify the network_cli and terminal plugins for py3 compat. Lots of mixing of text and byte strings that needs to be straightened out to be compatible with python3
* Documentation for the bytes<=>text strategy for terminal plugins
* Update unittests for more bytes-oriented internals
Fixes#24355
Ansible will now automatically retry a connection if SSH returns an error:
mux_client_hello_exchange: write packet: Broken pipe
This is probably a bug in SSH, but because it's safe to retry this
connection there is no need for Ansible to fail because of it.
* Update module_utils.six to latest
We've been held back on the version of six we could use on the module
side to 1.4.x because of python-2.4 compatibility. Now that our minimum
is Python-2.6, we can update to the latest version of six in
module_utils and get rid of the second copy in lib/ansible/compat.
* Move retry logic into _ssh_retry decorator, and apply to exec_command, put_file and fetch_file
* Update tests to reflect change
* Move _ssh_retry to _run, and update tests to reflect
* piped should use exec_command instead of removed _exec_command
* Rework tests to support selectors instead of select.select
* fixes error where eos would close the cli shell
* fixes network_cli connection plugin to check before calling open_shell()
* fixes json commands being sent over eapi
* removes unneeded supports_multiplexing var
* refactors terminal_prompts_re to terminal_stdout_re
* refactors terminal_errors_re to terminal_stderr_re
* updates network_cli unit test cases
At the moment, this change will use EPoll on Linux, KQueue on *BSDs,
etc, so it should alleviate problems with too many open file
descriptors.
* Bundle a copy of selectors2 so that we have the selectors API everywhere.
* Add licensing information to selectors2 file so it's clear what the
licensing terms and conditions are.
* Exclude the bundled copy of selectors2 from our boilerplate code-smell test
* Rewrite ssh_run tests to attempt to work around problem with mocking
select on shippable
Fixes#14143
This adds back the change to the network_cli plugin. Ths change adds
the ensure_connect decorator to the open_shell() method to make sure
the connection is valid before trying to open a shell.
The issue was due to the addition of the decorator that will call
_connect() when there is no connection. The _connect() method should
have been mocked in the test case. This commit fixes the test
case as well
Change was originally reverted in c414ded69a
