I spent some time debugging an error, where the unexpected HTTP return code was
reported to be -1. Digging deeper, I found the cause using this patch:
"An unknown error occurred: ~/.netrc access too permissive: access permissions
must restrict access to only the owner"
* Add version_added: 1.0.0 for all new features added before pre-ansible-base.
* Add version_added: 1.0.0 for all new features.
* Next release will be 0.2.0
* Fix error.
* Remove unnecessary warnings.
* Do domain resolution for portal
iscsiadm support domain resolution (ex: iscsiadm -m discovery -t sendtargets -p iscsi.chiehmin.com).
However, open_iscsi module will try to match the portal with discovered results which will never
matched cause the discovered results use IP to represent node.
This patch do portal DNS resolution first to solve this situation.
Signed-off-by: Chieh-Min Wang <chiehminw@synology.com>
* Update changelogs/fragments/461-resolve-domain-for-iscsi-portal.yml
Co-authored-by: Andrew Klychkov <aaklychkov@mail.ru>
Co-authored-by: Andrew Klychkov <aaklychkov@mail.ru>
To remove a scaleway compute node, one needs to stop it first. This is
handled internally within the module by shutting down before removing.
Shutting down the node transitions it to a "stopping" state, which is
not the "stopped" state we expect. We thus need the transition to
complete so that we can put it in the actual target state (absent, i.e.
delete it).
The mechanism for waiting for such transitions today is controlled by
module parameters, with default to not being enabled at all, which
includes the transition from ([running] -(stopping)-> [stopped]).
Without this chage, in case of a running node, we would shut it down
(transition it to "stopping"), not wait for it complete the transition,
realize that it's not yet stopped and issue a second shut down command
to the api. This would fail with a 400 Bad Request error, "already
stopped".
Reference: https://github.com/ansible/ansible/issues/45740
Reported-by: zwindler
* slackpkg: fix name matching in package installation (#450)
* Escape re parameters and optimize matching as suggested in code review.
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update changelogs/fragments/450-slackpkg-package-matching.yml
Co-authored-by: Andrew Klychkov <aaklychkov@mail.ru>
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Andrew Klychkov <aaklychkov@mail.ru>
* Added 'extra_install_args' option to allow extra upgrade/install
Example zypper args for this is
* --allow-vendor-change
* --replacefiles and
* --force-resolution
* Fix comment issue..
* Change extra_install_args option to a list.
Improved doc.
* Update plugins/modules/packaging/os/zypper.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Update plugins/modules/packaging/os/zypper.py
Co-authored-by: Felix Fontein <felix@fontein.de>
* Switch from using extra_install_args to individual module options.
* Fix syntax errors and limit 'allow-vendor-change' to 'dist-upgrade'
* Removed un-needed import
* Added changelog fragment
* Added tests for zypper replacefiles and allow_vendor_change options
* Removed dist-upgrade as it changes the test environment.
And it is hard to undo.
* Added proper test of replacefiles zypper option
Buiding two rpm packages containing same file path but with different content.
Making sure we fail to install them without the replacefiles options and that we succeed
using it.
* Make sure to create directory before writing files
* Fix indentation of ignore_errors
* Correct genereated rpm file name
* Improved duplicate file assertions
* Ensure no previous netcat package still exists.
* Corrected naming of example task.
* Fix variable name typo.
* Fix proper duplicate_content access
* Make sure to clean up duplicate rpms after tests.
* Removed debug
* Removed version_added of option allow_vendor_change and replacefiles
Co-authored-by: Felix Fontein <felix@fontein.de>
The common http api client class used by the scaleway modules only
enables automatic jsonification of the request body if the
"Content-Type" header is application/json. The client only included
"Content-type" in its default set of headers (notice the case
variation).
This caused a KeyError on send() if the caller relied on the default
content-type value.
* kwargs for _update_monitor wasn't corrected to new notification_message param
* forgot to bump a changelog fragment
* Update changelogs/fragments/389-datadog_monitor-corrects-deprecated-message-param.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Add validity check for [Driver][IPAddress] else use docker-machine ip command.
* Note why we fallback to the `docker-machine ip <machine name>` command.
* Add changelog fragment.
* Corrected module name in changelog fragment.
Co-authored-by: Ben Roose <ben.roose@wichita.edu>
* gitlab_project_variable: added support for variable_type
* gitlab_project_variable: Added integration tests for variable_type file.
* Changed test case variable name, ansible was masking the output.
* This fixes (#275)
* Migrated PR from https://github.com/ansible/ansible/pull/47768
* Applied requested changes
* Fixed issue with load_file_common_arguments
* Using args list when calling run_commands
* Keytool now reads passwords from stdin
* Fixed PEP8 indentation issues
* parted: consider current partition state even in check_mode
* Update changelogs/fragments/183-parted_check_mode.yml
Co-Authored-By: Andrew Klychkov <aaklychkov@mail.ru>
* Test check_mode considers get_device_info
* fixed pep8 E302: expected 2 blank lines
Co-authored-by: Andrew Klychkov <aaklychkov@mail.ru>
* changelog for the oc envvar fix
* Update changelogs/fragments/fix-oc-conn-plugin-envvar.yml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
* Adjust target directory so that ansible-test knows what to run when filters change.
* Divide by multiple instead of multiplying with product of 1/factor to improve numerical robustness.
* Allow to say what a year or month is (in days).
* Add changelog fragment announcing the time filters.
* Make sure unknown keyword args result in errors.
* Fix formatting screw-up.
* add description and hookscript parameters to proxmox LXC container
* fix pep8 E128
* Update plugins/modules/cloud/misc/proxmox.py
Co-Authored-By: Andrew Klychkov <aaklychkov@mail.ru>
* Update plugins/modules/cloud/misc/proxmox.py
Co-Authored-By: Andrew Klychkov <aaklychkov@mail.ru>
* add example for proxmox hookscript and description
* add changelogs fragment for PR #245
* set hookscript type
Co-authored-by: Andrew Klychkov <aaklychkov@mail.ru>
* Refactor postgresql_idx to simplify code
Have refactored the postgresql_idx module to:
* Use the class schema in the drop function rather than a passed in one
* Remove the if/else and just return the bool in the drop and create
functions
* Refactor postgresql_ext module
Have refactored the postgresql_ext module to:
* Remove an unused exception
* Simplify logic in the create and update functions
* Use list comprehension to simplify getting the available version
* Refactor postgresql_user_obj_stat_info module
Have refactored the postgresql_user_obj_stat_info module to:
* Simplify the logic in some of the functions
* Reduce duplicate code
* Add changelog fragment
Have added a trust_input option to the postgresql_user_obj_stat_info
module. This only checks the session_role since all other options are
passed as parameters.
Using a list ensures that all subprocess arguments are correctly
escaped. By building strings and then calling .split(), potential
arguments with a space will be incorrectly split over two arguments.
When a string is needed for presentation, join to the list to build the
string.
* flatpak: Change use of Popen to module.run_command()
* Update changelogs/fragments/274-flatpak-run-command.yaml
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Felix Fontein <felix@fontein.de>
Updated listen_ports_facts module documentation to reflect
- Linux only support
- Required netstat command
Fixes: ansible/ansible#68077
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Add trust_input option to postgresql_slot module
Have added a trust_input option to the postgresql_slot module. This
only checks the session_role since all other options are passed as
parameters.
* Add Changelog fragment
* Update docs following PR review
