* Fix rollback in junos_config
Fixes#30778
* Call `load_configuration` with rollback id in case
the id is given as input
* Pass rollback id to `get_diff()` to fetch diff from device
* Fix unit test
* fixed module generation
added missing lookup page
point to plugins when plugins
made modules singular
add display for verbose an debug messages
nicer templating, changed generation order for ref
corrected links
moved most of lookup docs to plugin section
* Copy edits
* Fixed typos
* Clarified wording
- old functionality is still available direct lookup use, the following are equivalent
with_nested: [[1,2,3], ['a','b','c']]
loop: "{{lookup('nested', [1,2,3], ['a','b','c'])}}"
- avoid squashing with 'loop:'
- fixed test to use new intenal attributes
- removed most of 'lookup docs' as these now reside in the plugins
* Module option metadata are extra arguments rather than S3 object metadata: update ExtraArgs variable.
* Remove hyphens from ExtraArgs to maintain backwards compatibility
* Map lowercase extra args to CamelCase
* Maintain backwards compatibility by guessing at content type rather than always defaulting to binary/octet-stream.
* Fix ExtraArgs for non-hyphenated options
* Simplify logic
* Remove sysctl entry when state=absent
* Cleanup sysctl integration test syntax
* Correct grammar on error message
* Add sysctl integration test for state=absent
* [rpm_key] Fix to import first key on the system
Fixes: #31483
* [rpm_key] removed unsafe_shell and "throwaway" underscore
* [rpm_key] adding test to add the first key on system
* Added warning for 'force' option
* Changed 'profiles' type to list
* Changed 'interfacetypes' type to list
* Added deprecation warning and fixed doc
* updated force parameter
* win_become: Added support to become a service user
* fixes for linting
* changes to get local and network service working
* fixed linting issues again
* pleasing pepe
- new module: ssm_parameter_store
- new lookup: ssm
* lookup module ssm - adjust error message
* Pacify pylint erroring on botocore not found
* adjust to version 2.5
this should allow user to control how they want the playbook dirs inspected
for additional vars, default now reverts to 2.3 behaviour (top).
corrected paths order
minor doc reword
* Properly handle user selection of `None` as vars_files
In a playbook, if a user has a playbook like:
```
- hosts: localhost
connection: local
vars_files:
tasks:
- ....
```
Then `vars_files` will be none, and cause a `TypeError` in vars-manager when it
tries to iterate over them. To avoid this, I changed the getter to either send
back the vars files from the user, or an empty list when the user passed
`None`.
* Only replace None with an empty list, not all falsey values
* Catch error when vars_files isn't iterable
* Move whole `for` loop into try/except and catch TypeError
* Line length
this was abandoned early on the manger side but seems like we left behind on plugin side.
more flexible extensions with yaml plugin
validate data correctly for yaml/constructed
fixed issue with only adding one child to keyed, the group only got the host that forced it's creation
fixes#31382fixes#31365
* Addition of TCP protocol to ELB target group as target groups support HTTP/S and TCP now
* Fixup stickiness type so that it checks if the current_tg has the stickiness_type key in the dict, as TCP ones do not
Trying to associate an already-associated ElasticIP was failing.
This is however supported by the `boto` method that is used
under the hood, `associate_address`:
To quote `boto` documentation:
```
This option to allow an Elastic IP address that is already
associated with another networkinterface or instance to be
re-associated with the specified instance or interface.
```
This defaults to False, both per backwards-compatibility
and to mirror the boto default value.
Fixes#27385
* Set desired capacity to min_size if no instances exist
* Improve readability of if/then clause
* Only update null desired_capacity to min_size on initial create
Any future updates to the ASG will be able to reference the existing
capacity.
* Make ansible_selinux facts a consistent type
Rather than returning a bool if the Python library is missing, return a dict with one key containing a message explaining there is no way to tell the status of SELinux on the system becasue the Python library is not present.
* Fix unit test
This reverts commit f8005d2737.
fix needs to be rethought as it applies to only newer git versions
and use of env shell breaks with non 'bourne compatible' shells
* Allow any_errors_fatal to be set in playbook.
* Default to the config file value for any_errors_fatal only if it isn't already provided.
* add _get_attr method
Make sure that example in docs is usable:
# Remove storage domain
- ovirt_storage_domains:
state: absent
name: mystorage_domain
format: true
Without this PR data_center and host parameters where required when we wanted to
remove some storage domain.
Also fixes a regression when trying to remove a detached
storage domain.
The following patch fixes a regression when trying to remove a detached
storage domain.
As part of the remove process the ovirt_storage_domains module first
tries to move the domain to maintenance and detach it.
In case of removing a detached storage domain with no DC attached to it
The maintenace process will fail with 404 (not exists) exception when
trying to fetch the DC using empty Guid.
The fix proposes a solution to return None value in case of a detached
storage domain.
* Add update_only parameter for yum module
When using latest, `update_only: yes` will ensure that only existing
packages are updated and no additional packages are installed.
* Update yum.py
Update version added for `update_only` parameter to 2.5
* add unit tests for update_only flag in yum module
* Add new lines to end of config file lines
* Properly write out selinux config file
Change module behavior to not always report a change but warn if a reboot is needed and return reboot_required.
Improve the output messages.
Add strip parameter to get_file_lines utility to help with parsing the selinux config file.
* Add return documentation
* Add integration tests for selinux module
* Use consistent capitalization for SELinux
* Use atomic_move in selinux module
* Don't copy the config file initially
There's no need to make a copy just for reading.
* Put message after set_config_policy in case the change fails
* Add aliases to selinux tests
* win_become: move error handling to Ansible outside of shell
* trimmed the output so double newlines don't get set
* added test for non-zero exit code
* missed issue URL on test
* changed exit to SetShouldExit
The /etc/os-release based distro detection doesn't
seem to work for Ubuntu 10.04 (no /etc/os-release?).
So it was testing the next case which was /etc/lsb-release to
see if it is 'Mandriva'. Since the check for existence of
(/etc/lsb-release, Mandrive) was the first non-empty dist
file match, 'ansible_distribution' was being set to 'Mandriva'
expecting to be corrected by the data from the dist file content.
But since the dist file parsing for Mandriva didn't match for
Ubuntu 10.04 /etc/lsb-release _and_ there is no Debian specific
lsb-release check, 'ansible_distribution' stayed at 'Mandriva'
and the dist file checking loop keeps going and eventually off
the end of the list before finding a better match.
Adding a debian/ubuntu specific check for /etc/lsb-release after
the debian os-release sets the info correctly and stops further
checking of dist files.
Fixes#30693
'distribution' facts were being set after checking
the existence of the dist file, and then being set
again with more detail after they were succesfully parsed.
But if the dist file was not succesfully parsed and
matched the required names, the loop continues
without resetting the earlier set facts. This is
how 'Mandriva' would end up being the 'distribution'
file for unrelated cases (it would find /etc/lsb-release,
set distro to 'Mandriva', then fail to parse/match and
continue the loop. If no other checks worked, 'Mandriva'
would stick).
* parse_dist_file_NA should check 'name' not distro for NA
parse_distribution_file_NA was checking the incoming
'distribution' fact to be 'NA', but the fact itself can
be specific at that point ('KDE Neon', for ex) but the
check is really if the 'name' it was passed is NA.
* for matches on OS_RELEASE_ALIAS (ie, 'Archlinux') do
not continue if the dist file content doesn't match. Previously
it had to because of the 'Mandriva' bug mentioned above.
This is a more general fix for #30693 than #30723
Fixes #30693
Related to #30600
In cli.CLI.unfrack_path callback, special case if the
value of '--output' is '-', and avoid expanding
it to a full path.
vault cli already has special cases for '-', so it
just needs to get the original value to work.
Fixes#30550
get_config would use ConfigManager.get_ini_value which does not
exist. What we are meant to use is
ansible.config.manager.get_ini_config_value and this method does not
expect a list, only a dictionary with a section and a key.
This PR addresses two issues:
1. The hg module was added to command module's check_command list,
so if someone runs hg directly from the command module, the command
module would warn the user "Consider using hg module rather than running hg".
We address this by removing hg from the list.
2. We added a new note to tell users push feature will be addressed
in issue #31156.
* Added support to retrieving LIG resources in HPE OneView
* Fixing copyright header according to review
* Swapping out config for full credentials in parameter for documentation
* Added support to retrieving Enclosures in HPE OneView
- Added unit tests
* Updated version_added to 2.5
* Changing return type of enclosure_script to string
* Fixing copyright header according to review
* Replaced config for credentials in parameters for documentation
Fix adds a new module 'vmware_guest_powerstate' to manage
power states of virtual machine.
Fixes: #30371
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
As part of the absent state of ovirt_storage_domains module,
the pre_remove method tries to move the stoage domain to
maintenance and detach it.
In case a destroy of a storage domain is being called there is no need
for those operations since the destroy might be merely a DB operation.
vm_username and vm_password are required parameters in
vmware_vm_shell. Fix adds changes to documentation as well.
Fixes: #28266
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* module_utils.urls - Encode the proxy connect as binary
Under Python3 the sendall method expects binary not a string.
Prior to this change the below exception was being thrown;
Traceback (most recent call last):
File "/tmp/ansible_umxox7_x/ansible_modlib.zip/ansible/module_utils/urls.py", line 1044, in fetch_url
client_key=client_key, cookies=cookies)
File "/tmp/ansible_umxox7_x/ansible_modlib.zip/ansible/module_utils/urls.py", line 951, in open_url
r = urllib_request.urlopen(*urlopen_args)
File "/opt/blue-python/3.6/lib/python3.6/urllib/request.py", line 223, in urlopen
return opener.open(url, data, timeout)
File "/opt/blue-python/3.6/lib/python3.6/urllib/request.py", line 524, in open
req = meth(req)
File "/tmp/ansible_umxox7_x/ansible_modlib.zip/ansible/module_utils/urls.py", line 729, in http_request
s.sendall((self.CONNECT_COMMAND % (self.hostname, self.port)).decode())
AttributeError: 'str' object has no attribute 'decode'
Encoding the value is inline with the lines below (Proxy-Authorization etc) which are being sent as binary.
