Basic passwords are rejected by the nxos device unless `no password strength-check`
is configured. This change just makes the password meet the minimum strength checks.
* The test was setting `lsa max` value to 2222 but the default `lsa hold` value is 5000.
* `hold` must be less than `max` or else the device raises a clierror, so I just added a lower non-default `hold` value to satisfy the cli.
* Output warnings from docker daemon on container create and update.
* Accept warning for blkio_weight instead of idempotency.
* Value quoting.
* Avoid loop variable conflict.
* Add changelog.
* Make one test case faster.
* Add 'Docker warning: ' prefix.
* Add a generalized warning reporting function.
* Add rollback_config
* Add change log fragment
* Fix broken test
* Actually fix broken tests
* Add rollback_config example
* Default rollback_config as None
* Abort early if rollback_config does not exist
* Add mount options
* Remove mount readonly default
* Fix driver_config test
* Add documentation
* Add changelog fragment
* Properly indent tmpfs_ options
* Use correct service suffix for mount tests
* Check for None value on tmpfs usage check
* Document change of mounts.readonly return key
* Use correct change log type
* Really use correct change log type
* Revert changing mount.readonly to read_only
* Configurable list of facts modules (#31783)
- allow for args dict for specific modules
- add way to pass parameters
- avoid facts poluting test
- move to 'facts gathered' flag
- add 'gathering' setting tests
- allow parallel option in case serialization is too slow
- added support to automatically map network facts
uses "smart" connection mapping
* Raise OpenSSLBadPassphraseError if passphrase is wrong.
* Improve handling of passphrase errors.
Current behavior for modules is: if passphrase is wrong (or wrongly specified), fail.
Current behavior for openssl_privatekey is: if passphrase is worng (or wrongly specified), regenerate.
* Add changelog.
* Add tests.
* Adjustments for some versions of PyOpenSSL.
* Update lib/ansible/modules/crypto/openssl_certificate.py
Improve text.
Co-Authored-By: felixfontein <felix@fontein.de>
* nxos_igmp_snooping: group-timeout fails when igmp snooping disabled
group-timeout config will be rejected by the device if `ip igmp snooping` is disabled.
* raise a failure for this condition
* reorder the command list so that group-timeout is always last
* SA fixes
* SA fixes
* only call gt_dependency if gt
Test yaml fixes for n3048:
* 3048 does not support bidir option
* 3048 cannot remove rp-address if prefix-list/route-map is present
* yes: no ip pim rp-address x.x.x.x
* no: no ip pim rp-address x.x.x.x prefix-list foo
* no: no ip pim rp-address x.x.x.x route-map bar
This test now passes on N9k/N7k/N6k/N3k.
* Support FOREIGN DATA WRAPPER and FOREIGN SERVER in postgresql_privs module
* Added available from note to fdw and fs object types
* Integration tests, examples in documentation
* Complete integration tests
* [docker_image] fix the changed state for tagging and pushing
Signed-off-by: Jakob Ackermann <das7pad@outlook.com>
* [docker_image] add tests for (force) tagging and force pushing
Signed-off-by: Jakob Ackermann <das7pad@outlook.com>
* [docker_image] add a news fragment for the fixed force tag/push behavior
Signed-off-by: Jakob Ackermann <das7pad@outlook.com>
* Fixed crash with hidden files
added "-force" parameter on "Get-Item" cmdlet. this is needed to get file info if the file is "hidden"
without this option modules like win_file, win_template, win_copy crashes on hidden files. this is because with "test-path" it sees that the file exists, but "get-item" can't get the file info.
for more information on "-force option": https://docs.microsoft.com/en-us/powershell/module/microsoft.powershell.management/get-item
* Add changelog and integration tests
* fix tests for older Windows versions
* nxos_vxlan_vtep: Add dependency checks
Some of the N9k-specific attrs are failing due to hardware/feature/resources.
* `global_suppress_arp`
- dependency on TCAM resources
* `global_mcast_group_L3`
- hardware dependency on specific chassis/linecards
- feature dependency on `ngmvpn`
* `global_ingress_replication_bgp`
- hardware dependency on specific chassis/linecards
Tested on N9k with/without TCAM resources, various N9k chassis, N7k, N6k. All 100% Pass.
* pylint
* Add support for Windows hosts in the SSH connection plugin
* fix Python 2.6 unit test and sanity issues
* fix up connection tests in CI, disable SCP for now
* ensure we don't pollute the existing environment during the test
* Add connection_windows_ssh to classifier
* use test dir for inventory file
* Required powershell as default shell and fix tests
* Remove exlicit become_methods on connection
* clarify console encoding comment
* ignore recent SCP errors in integration tests
* Add cmd shell type and added more tests
* Fix some doc issues
* revises windows faq
* add anchors for windows links
* revises windows setup page
* Update changelogs/fragments/windows-ssh.yaml
Co-Authored-By: jborean93 <jborean93@gmail.com>
* Document and validate mode choices
* Update examples
* Test cpu float values
* Test correct option
* Fix module return sample
* Add secrets and user to module return value
* Order options alphabetically
* Add changelog
* yaml indentation
* Revert "Order options alphabetically"
This reverts commit 51dabccda7930b707d5683670af7f89a68aeb577.
* Be consistent with choices type
* docker_swarm_service tests: use 'resolve_image: no' to avoid registry lookup if image is up-to-date.
* Improve docker_node performance: don't sleep after last try.
* Fix version checks in tests
* Set minimum version to 2.0.2
* Networks can only be updated >= docker-py 2.7
* Constraints require docker-py 2.4.0
* Healthchecks require docker-py 2.6.0
* Properly run tests different docker_py_versions
* Add changelog fragment
* Specify lowest version on placement.constraints
* Fix running new tests on older docker-py
* Handle different hosts formats returned by docker
* FIx test naming
* Quote str options
* secrets options require docker-py 2.4.0
* Replace InventoryFileCacheModule with a better developer-interface
Use new interface for inventory plugins with backwards compatibility
Auto-update the backing cache-plugin if the cache has changed after parsing the inventory plugin
* Update CacheModules to use the config system and add a deprecation warning if they are being imported directly rather than using cache_loader
* Fix foreman inventory caching
* Add tests
* Add integration test to check that fact caching works normally with cache plugins using ansible.constants and inventory caching provides a helpful error for non-compatible cache plugins
* Add some developer documentation for inventory and cache plugins
* Add user documentation for inventory caching
* Add deprecation docs
* Apply suggestions from docs review
* Add changelog
* Do not return 'instances' when wait is false
* Added integration tests for wait: false
* Added changelog fragment
* Fix test suite to work with ec2_instance
* Additional permissions
* Enforce boto3 version
* Fix broken tests
* Improve error messages
* fix linter issues
* adds fargate launch_type to ecs_task module
* White space changes
* fix documentation for running ecs task on fargate
* remove extraneous example from ecs_task
* White space changes
* Adds changelog fragment
* Pluralize minor_changes in changelog fragment
* Add Stop and Start task permissions
* New module postgresql_ping: simple module to check remote PostgreSQL server availability.
* New module postgresql_ping: simple module to check remote PostgreSQL server availability, doc fixes
* postgresql_ping: added integration tests
* New module postgresql_ping: misc changes
* New module postgresql_ping: change return suit
* New module postgresql_ping: tests reformatting, return value
* Various cosmetic/documentation fixes
* A few more fixes
* And even more cleanups
* Fix PEP8 issue
* Extend win_psmodule - rebased at 2019-01-07
* Change a way how defined parameters are added to the list
* Correct registering a repository
* Change way how tests for the check_mode: true are run
* Post-review updates
* Post-review updates -2
* Post-review updates -3
* Switch to PowerShell loop
* Minor updates
* Remove variants of an exception handling
* Change error handling
- The openssh_keypair module will return a public key output on the
private key creation.
- Add integration test in order to verify the public key output.
* set valid_until equal to current time + spot_wait_timeout
* Add checksum check for downloaded file.
* refactoring
* fix typo
* add fixes
* mart try,catch handling
* revert lib/ansible/modules/cloud/amazon/ec2.py from upstream
* refactoring
* remove empty lines
* add checksum verification for existing file
* fix current file check
* refactoring destination file check
* add handling exceptions
* refactoring
* Added download file hash data from url
* fix string aligning
* fix bug with uri
* Added get hash from multy-string file
* Added URI support for checksum file location
* refactoing
* Remove any non-alphanumeric characters for hash from url
* fix discussions; add support for PS3
* refactoring
* add size return value
* checkout from upstream for lib/ansible/modules/cloud/amazon/ec2.py
* add Ansible.ModuleUtils.Legacy support; refactoring
* Copyright added
* Checking files size before and after downloading added.
* remove unused code
* Corrected regexp for dotted slashed file name prefix in hash-file
* hotfix typo error; add int tests
* remove legacy module support; split checksum to checksum, checksum_algorithm, checksum_url
* changed default hash algorithm
* Fixed case for ContentLength = -1
* Old comment removed
* fix typo
* Remove file size check before downloading
* add alias to ; fix tests
* adjust tests; fix lint warnings from PSScritpAnalyzer
* workaround for bug in win_chocolatey module on win2008
* remove win_get_url.ps1 from /test/sanity/pslint/ignore.txt
* add checksum_algorithm as retuen value
* first normalise before return Result
* resolve discussions
Signed-off-by: Viktor Utkin <viktor.utkin7@yandex.ru>
* fix discussions
fix http tests as discussed
* fix last discussions
* Reduce code duplication and add idempotency check
* fix sanity issue and remove testing code
* move back to using tmp file for checksum comparison
* Decreasing docker_swarm requirements.
* Fixing docker-py / docker API version requirements, and some comments.
* Add changelog.
* Only send parameters specified by user to docker daemon.
* Extend labels test: not specifying == keep labels.
* Bump minimally required docker-py version for docker_node and docker_node_facts to 2.4.0.
* Prevent crashing when publish or healthcheck is not provided.
* Similarly to docker_swarm tests, only execute docker_node tests on real VMs and restart docker daemon when tests are done.
* Look in /lib/molly-guard for shutdown command
Signed-off-by: Sam Doran <sdoran@redhat.com>
* Add parameter for extra_search_paths
Signed-off-by: Sam Doran <sdoran@redhat.com>
* Change option to search_paths
- Update docs
- Make the parameter replace the default values
- Add some sanity checking on the data type
Signed-off-by: Sam Doran <sdoran@redhat.com>
* Correct parameter in tests, change conditional for molly-guard tasks
Signed-off-by: Sam Doran <sdoran@redhat.com>
* Address feedback
* Simplify field validation
Needed the try except in case a non-iterable type is put in the search_paths field
* uri/win_uri: Make method a free text field
Since various interfaces introduce their own HTTP method (e.g. like
PROPFIND, LIST or TRACE) it's better to leave this up to the user.
* Fix HTTP method check in module_utils urls
* Add integration test for method UNKNOWN
* Clarify the change as requested during review
* Fix TagName and TagValue in aws_kms
Fixes#53061
* Improve test suite to check for tags
Also fixed some obvious failures, need to run the test suite from time
to time!
* adding quiet option to assert (ansible#27124)
* adding doc for quiet to assert.py
* fixing PEP8 failure
* improving example
* improving docs
* adding changelog fragment
* adding . at end of descriptions
* removing trailing blank line
* adding integration test for assert
* fixing CI complaints
* disabling gather_facts in quiet.yml test
* rerunning to capture skip
* cleaning up python 2 vs 3
* following rebase
* fixing CI complaints
* fixing CI complaints
* fixing CI complaints
* fixing CI complaints
* fixing CI complaints
* Python interpreter discovery
* No longer blindly default to only `/usr/bin/python`
* `ansible_python_interpreter` defaults to `auto_legacy`, which will discover the platform Python interpreter on some platforms (but still favor `/usr/bin/python` if present for backward compatibility). Use `auto` to always use the discovered interpreter, append `_silent` to either value to suppress warnings.
* includes new doc utility method `get_versioned_doclink` to generate a major.minor versioned doclink against docs.ansible.com (or some other config-overridden URL)
* docs revisions for python interpreter discovery
(cherry picked from commit 5b53c0012ab7212304c28fdd24cb33fd8ff755c2)
* verify output on some distros, cleanup
* network.py:ActionModule:run: does not honor _handle_src_option failures
PR #50301 moved template error handling out of run() and into its
own method in `_handle_src_option`; however, after the change run()
ignores the return value so any errors are ignored.
Reproduceable with `nxos_config/tests/common/src_invalid.yaml`
Verified fix with `nxos_config/tests/common/src_*` tests.
Ref:
71113ee291 (diff-7477bf046013758366cc85b06f90709aR43)
* nxos_config/tests/common/src_basic: Updated to test with src
This test was not actually testing with `src:` as it should have.
* Revert 412d7e change to plugins/action/network.py
PR #52912 fixed this already.
* nxos_config: fix src_invalid test
* Ensure play order is obeyed
it was being ignored depending on other options
also added tests for each order (except shuffle) both serial and not
fixes#49846
* adding mysql configuration module
* fixes in configuration
* move tests
* fixes
* updating test
* updated module
* fixed merge issues
* one more test fix
* adding for debugging purposes
* removed file checked in by mistake
* one more merge problem
* fixed test
* try to get more info
* fix error
* Add more tests.
* Added tests for CA options.
* Don't run in docker-in-docker situations where docker daemon becoming instable is really dangerous. Also, restart docker daemon after tests.
* Only run CA tests when openssl_certificate can be run (which is not the case for RHEL7, see #34054).
* Add comment on why docker-based CI runs are skipped.
* nxos_hsrp: fix 'sh_preempt': <unknown enum:>
Some older nxos images fail to set this attr value. This fix checks for
unknown enum and issues a second (unstructured) call to the device to get
the data.
* add whitespace for pep8
