When using the `make:` extras module, often the action taken
by the Make target is large. It is useful, therefore, to see
the output that `make` had to std{out,err} during execution
even when the target did not fail.
Signed-off-by: Steve Kuznetsov <skuznets@redhat.com>
Fail with:
Traceback (most recent call last):
File \"/tmp/ansible_2rsl4fg1/ansible_module_pkgng.py\", line 353, in <module>
main()
File \"/tmp/ansible_2rsl4fg1/ansible_module_pkgng.py\", line 330, in main
_changed, _msg = install_packages(module, pkgng_path, pkgs, p[\"cached\"], p[\"pkgsite\"], dir_arg)
File \"/tmp/ansible_2rsl4fg1/ansible_module_pkgng.py\", line 161, in install_packages
old_pkgng = pkgng_older_than(module, pkgng_path, [1, 1, 4])
File \"/tmp/ansible_2rsl4fg1/ansible_module_pkgng.py\", line 121, in pkgng_older_than
while compare_version[i] == version[i]:
TypeError: 'map' object is not subscriptable
Fix an issue with _nic_to_public_ips_instance() function. There was an assumption in the code that the Public IP sits in the same resource group, this isn't always the case.
ansible-validate-modules is now in ansible/ansible
During 2.3 we will be merge the modules into ansible/ansible so this file will go away.
The new testing documentation will refer to `ansible-test` which will wrap up the unit, integration, and ansible-validate-modules. So no need to document here.
* openbsd_pkg: Use correct part of name in match.
Previously this part of the code could assume that the name was a stem
with nothing else attached (like "autoconf"). With the introduction of the
branch syntax ("autoconf%2.13") this is no longer true.
Check if the package name was identified as using a "branch" style name,
and base the match on the leading part of the name if that is the case.
While here remove unnecessary "pass" and tidy up debug log message.
Problem reported by @jasperla.
* openbsd_pkg: Add missing "." in comment.
Fix mongodb_user.py version detection logic for mongo srv 2.6 and mongo driver 2.7. The wrong variable was used for detecting the mongo driver version. This fix resolves the error "(Note: you must use pymongo 2.7+ with MongoDB 2.6.. 2.6.11)" no matter what version of pymongo you had installed for mongodb 2.6.
When archiving multiple files, the full length of the calculated
`arcroot` would be removed from the beginning of all file names. If
there was no arcroot, the first two characters of all files would be
removed, so `file.txt` would become `le.txt`.
This patch uses the regular expressions substitution anchored to the
start of the string, so the arcroot is only removed if it is actually
present.
* Fix error in crypttab doc
* Use path type for file argument
This permit to make sure that $HOME and '~' are properly
expanded, even if in the case of crypttab, this might not make
a lot of sense
* PanOS module that allows admin password change.
* fixed a typo
* empty __init__.py
* added require ansible Python extension .py
* added version string
* added return docstring
* changed version to 2.2
* - changes to the format and module as requested by @privateip
* changed version back to 2.2 as 2.3 was failing automated tests
* Revert "changed version back to 2.2 as 2.3 was failing automated tests"
reverting version info
This reverts commit 71d520f3b4b69eb017c2b9f287a74cb77fae9d1c.
The modules listed in this PR were using YAML that resulted in
blockquote tages being inserted into the generated RestructedText.
This PR fixes that so that the documentation once again looks correct
The returns are actually nested under `configuration` keys, so the docs
need to reflect that. Also add the automatic return of the function
version, so it can be used to feed the `lambda_alias` module.
The fix allows the asa_config module to request the config to contain
all default statements or password information necessary for vpn
tunnel endpoints
This argument had a couple of issues with it. First, as it was
being interpreted in the code, it did not check for idempotency.
Second, the model of having the parameters be "all_*" is going to
hinder the ability to "undo", so-to-speak, what the user did while
maintaining legibility.
Consider if the user specified "all_enabled_vlans='net1'" and then
decided they wanted to backout of this decision. What is the proper
argument to fulfill this wish? "all_enabled_vlans='...?'
This patch changes the all_enabled_vlans argument to be "enabled_vlans",
ensures that idempotency works, and also provides for a way to "undo" a
change to the enabled VLANs by allowing the user to specify the special
case VLAN named "ALL" (all capitals).
This makes the parameter more intuitive because the users will specify
which vlans they want to make the virtual available on
* enabled_vlans="net1"
but also allows them to "undo" what they did by setting it back with
the case of all
* enabled_vlans="ALL"
* elasticsearch_plugin: rewrite module to not use unsupported parameters (#1785)
Avoid using parameters when they are not needed (#1785)
* elasticsearch_plugin: add version only during plugin installation and parse plugin name for its removal
* elasticsearch_plugin: join command args before running it
We were incorrectly making VLANS always be untagged when they could
be either tagged or untagged. This change corrects the arguments to
the vlan module to allow for specifying either untagged or tagged
interfaces. The arguments are mutually exclusive
The code for traffic groups was not being tested and therefore
had errors associated with it. It is now covered in coverage tests
and bugs that were found in it have been fixed.
See this issue for details
https://github.com/F5Networks/f5-ansible/issues/28
In the six package, the map() function returns an iterator instead
of a list. This code was continuing to use the map() return value
as if it were a list and this broke the address_class facts.
This patch changes the code to use the list() method on the return
value of map().
Using values caused problems while creating an integration playbook as it is a reserved word. Seeing as this module is not yet released, it's prudent to make this change now. 'record_data' is more descriptive and uses the _data convention that we've established for instances.
No functionality in the module has changed.
* Add oVirt module to manage VMs
This patch add oVirt module to manage Virtual Machines
* Add oVirt module to manage authentication
This patch add oVirt module to manage authentication
* Add oVirt module to manage disks
* Added VM state management and fixups
* Modification of describe_gateways key so that it is consistent with what create_gateway returns.
Also added AnsibleModule spec to require bgp_ip on state=present as defined in the doc
* Don't remove CustomerGateways key to preserve backward compatibility
The 'short_description' in netapp_e_lun_mapping was a
list instead of txt.
This fixes errors on 'ansible-doc -l' of form:
ERROR! module netapp_e_lun_mapping has a documentation
error formatting or is missing documentation
Fixes: #17634 (ansible/ansible)
When using `use_max` or `use_min` in `pam_limits`, the new value is an integer compared with the actual_value which is a string, so they are always different and the module reports a changed but none occurred.
The modules prefixed with netapp_e* are built to support the
SANtricity storage platform.
The modules provide idempotent provisioning for volume groups, disk
pools, standard volumes, thin volumes, LUN mapping, hosts, host groups
(clusters), volume snapshots, consistency groups, and asynchronous
mirroring.
They require the SANtricity WebServices Proxy.
The WebServices Proxy is free software available at
the NetApp Software Download site:
http://mysupport.netapp.com/NOW/download/software/eseries_webservices/1.40.X000.0009/
Starting with the E2800 platform (11.30 OS), the modules will work
directly with the storage array. Starting with this platform, REST API
requests are handled directly on the box. This array can still be
managed by proxy for large scale deployments.
* letsencrypt: improve error handling
Use the new "body" field of the info dict in case of a HTTPError.
* letsencrypt: HTTP 202 is a valid status while polling
The domains method was not defined, and therefore when specifying
a parent domain during route domain creation, the process would
fail.
Tests have been added to detect this going forward
* Fix bug in processing of null return
* Fix multi-dc folder location by enhancing the foldermap and using it to search
* Remove unused functions
* Refactor finding vm by folder
Fixes#2900
* Use common file arguments on destination file
* Rename 'compression' to 'format' h/t @abadger
* Add support for plain 'tar' format
* Ensure check_mode is respected
* clean up functions and remove unneeded code
* config difference now includes keyword argument
* module reports changed when save argument is yes with or without check_mode
* updated fail_json return with exc kwargs
* fixed up import statements
* fixes issues with import error
* removes need for filter attribute in Cli instance
* now filters config either from device or provided via config argument
ref: #2890
Jenkins stores the information about the state (disabled/enabled) in the config, which result in a race condition between `config` and `enabled` and we loose idempotency. It makes sense to define them mutually exclusive.
Renamed `enable` to `enabled`. Ansible uses the name `enabled` in many modules, e.g. service as it indicates a state not an action.
Ensure the HAVE_FIREWALLD checks check only for the
presence of the python dependencies, and not the age
of the library or the state of the service, which
are checked later.
This bug was introduced accidentally when refactoring to 2.2. The instance
of the candidate config was deleted. This adds the candidate config
instance back
fixes#2890
current implementation was breaking making the module unusable, changing to the list comprehension fixes this. Also default to seconds instead of throwing a exception when no duration units are supplied as this causes tests to fail
Adds bigip_ssl_certificate module
This module is another in the ongoing "bootstrapping saga" that is
being undertaken. With this module you can manage the lifecycle of
the SSL certificates on a BIG-IP. This includes those used for
SSL offloading.
Tests for this module can be found here
https://github.com/F5Networks/f5-ansible/blob/master/roles/__bigip_ssl_certificate/tasks/main.yaml
Platforms this was tested on are
12.0.0
12.1.0
* removes get_module() factory method for NetworkModule
* add src argument to provide path to config file
* add new choice to match used to ignore current running config
* add update argument with choices merge or check
* add backup argument to backup current running config to control host
* add defaults argument to control collection of config with or withoutdefaults
* add save argument to save current running config to startup config
* commands argument now accepts a dict arguments
* only show commands are allowd when check mode is specified
* config mode is no longer allowed in the command stack
* add argument match with valid values any, all
* zypper_repository add auto_import_keys options
* also give more output on failure (rc, stdout, stderr)
* be more specific in the doc for auto_import_keys
* add runrefresh option to zypper_repository
* this comes out of ansible/ansible-modules-extras#2411, where AnderEnder adds refresh to the zypper module
* adds a way to force zypper to refresh a repository
* can be used to refresh independently of auto_import_keys
* add option to run name=* runrefresh=yes
* name runrefresh to not break existing use to refresh (now alias to autorefresh)
* add version_added flag to autorefresh
* remove wrong version_added comment
Recently, a user reported that the bigip_facts module was failing with the error
received exception: object of type 'itertools.imap' has no len()
This reported was occurring at line 1657 of the bigip_facts module
bug report is here
https://github.com/F5Networks/f5-ansible/issues/25
Upon further investigation, the map function for returning the specified
includes was returning an iterator, and calling len() on an iterator does
not work.
I believe this problem was caused by part of the Python 3.x effort insofar
as the inclusion of this line
https://github.com/ansible/ansible/blob/devel/lib/ansible/module_utils/basic.py#L143
seems to affect our usage of map(), probably for the better anyway, and we need
to change our expectations in our module's code to no longer assume a list, but
instead assume an iterator.
After trawling through the module_utils/basic code, I think a list
comprehension is more appropriate here anyway, so I'm changing it to be
that. The affected user reported it works this way, and my own testing
on 2.2.0 supports that.
* Add facts and storage system modules.
* Update version metadata.
* Add facts and storage system modules.
Update version metadata.
Add init files.
* Fixes for review comments.
* Fixes for review comments.
* Update document fragments for api_* options to indicate they are required.
* Correct bad string concatenation.
* Add option description for validate_certs since basic_auth arg_spec is no longer extended.
* Add default value for validate_certs in docstring.
* Rename directory name so it applies to netapp and not simply eseries platform.
* Rename modules to differentiate other netapp modules.
First version of execute_lambda module
Supports:
- Synchronous or asynchronous invocation
- Tailing log of execution (sync execution only)
- check mode
* Error if shade is too old for domain_id on os_project
os_project's domain_id parameter requires shade >= 1.8.1 to work. Be
explicit.
Fixes#2805 os_project requires python-shade 1.8.1 or higher
* What I really meant was 1.8.0
This parameter can be used to open up access to (among other things)
the mgmt address of a BIG-IP. It is necessary for configuring bigips
in an HA configuration.
Revert "Added support for firewall rules, consolidated resource UUID retrieval methods for server and NIC modules, and set LAN type to int."
This reverts commit 464cbb89f225578386a830624633a55e39054544.
* UCS udm_dns_zone: added
Signed-off-by: Tobias Rüetschi <tobias.ruetschi@adfinis-sygroup.ch>
* UCS udm_dns_zone: updated, add supports check mode
Signed-off-by: Tobias Rüetschi <tobias.ruetschi@adfinis-sygroup.ch>
* UCS udm_dns_zone: updated, add support to modify dns zones
* UCS udm_dns_zone: change string formating
* UCS udm_dns_zone: add a function to convert the time to the biggest unit
* UCS udm_dns_zone: add type definitions to the argument specification
* UCS udm_dns_zone: update function convert_time
* UCS udm_dns_zone: only modify object if it has changed
* UCS udm_dns_zone: add documentation
* UCS udm_dns_zone: fix checks
* UCS udm_dns_zone: if dns zone not exists, changed is always true
* UCS udm_dns_zone: documentation, add version_added
* UCS udm_dns_zone: add license and fix travis for python 3
* UCS udm_dns_zone: import common code for univention from ansible.module_utils.univention
* univention udm_dns_zone: adapt to library univention_umc
* univention udm_dns_zone: lint
* univention udm_dns_zone: add requirement python >= 2.6 to documentation
* univention udm_dns_zone: dont import time, its unused
* Add the flush parameter.
When specified the flush parameter indicates that this module should remove all
rules from the specified table. If no table parameter is specified then the
default filter table is flushed.
* Add support for setting chain policies.
The module supports setting the policy of a given chain and table to the
following target values, ACCEPT, DROP, QUEUE, and RETURN. This parameter ignores
all other unrelated parameters.
* Fix pep8 issues.
* Fix missing quotation.
* Make 'flush' and 'policy' parameters mutually exclusive.
This combination is not supported by the wrapped iptables command. 'flush' and
'policy' however, can both take the 'chain' argument.
This module can be used to maintain the iRules for both LTM and GTM
on a BIG-IP. iRules should be supplied in their string form using
normal strings (unlikely), file lookups (likely), or template
lookups (likely).
Tests for this module can be found here
https://github.com/F5Networks/f5-ansible/blob/master/roles/__bigip_irule/tasks/main.yaml
Platforms this was tested on are
11.6.1
12.0.0
12.1.0
* apk: Fix mutual exclusivity
Ensure that 'name' and 'upgrade' are mutually exclusive.
Also add a note to the documentation to say so.
Fixes: #2767
* Fix documentation
This change removes the loop watching for "/var/lock/subsys/lxc" from
the lxc-container module. This change simply runs the command within
a container using the lxc CLI tools which should be responcible for
locking and unlocking on their own.
Closes-Issue: https://github.com/ansible/ansible-modules-extras/issues/690
Signed-off-by: Kevin Carter <kevin.carter@rackspace.com>
* Changed type of 'details' argument to bool on ecs_service_facts module.
* Changed type of 'autostart' argument to bool on virt_* modules.
* Changed types of 'autoconnect' and 'stp' argument to bool on nmcli module.
('create_connection_bridge(self)' and 'modify_connection_bridge(self)' are not implemented yet?)
* Added conversion of 'value' argument when 'vtype' is boolean on debconf module.
After commit 9392943 more properties are always sets with their defaults
values (e.g. service to 'any'). This causes no issue when the rule is created,
but causes an error message that says "The property 'X' cannot be found on this
object. Verify that the property exists." because the module checks for
any property value that has changed, but `netsh advfirewall firewall show rule`
does not list any property unless `verbose` is set. This patch solves this.
Fixes#2624
This module can be used to manipulate data centers in a BIG-IP.
It supports both the iControl SOAP and iControl REST APIs, but default
to the REST API. With this module, you can perform operations similar
to those available in tmsh to create data centers and set the contact,
location, and description of those data centers.
This module is most useful in the initial provisioning of a BIG-IP
This module can be used to directly manipulate the system database
variables in a BIG-IP. It supports both the iControl SOAP and iControl
REST APIs, but default to the REST API. With this module, you can
perform operations similar to those available in tmsh to set system
variables such as turning off the default setup screen.
This module is most useful in the initial provisioning of a BIG-IP
This module can be used to manage VLANs in BIG-IP on various software
versions. It is part of a bootstrapping effort underway to provide
modules necessary to bootstrap core settings in a BIG-IP.
Tests for this module can be found here
https://github.com/F5Networks/f5-ansible/blob/master/roles/__bigip_vlan/tasks/main.yaml
Platforms this was tested on are
- 11.5.4 HF1
- 11.6.0
- 12.0.0
- 12.1.0 HF1
Changes:
- Document missing 'path' option and remove redundant brew_path manipulation
- Add 'update_homebrew' option since 'brew cask update' as a synonym for
'brew update' is available nowadays
- Add additional missing aliases documentation
- Port additional improvements (expanded support for brews path, cask path
patterns etc.)
- Allow proper `list` type support for 'name' option.
This allows doing 'brew tap <url>' where the URL is not assumed to be on GitHub,
and the protocol doesn't have to be HTTP. Any location and protocol that git can
handle is fine.
While at it, allow proper `list` type support for 'name' option and update
module documentation for option aliases.
* fixes#2158
* handles version-specifiers (>,<,>=,<=,=) correctly
* adds option "oldpackage", which is passed to zypper
* this is implied as soon as a version is specified
* it can be used independently to allow downgrades coming from repos
* add __main__ check
* extend documentation on version specifier
* Create a Kinesis Stream.
* Tag a Kinesis Stream.
* Update the Retention Period of a Kinesis Stream.
* Delete a Kinesis Stream.
* Wait for a Kinesis Stream to be in an ACTIVE State.
A number of coding conventions have been adopted for new F5 modules
that are in development. To ensure common usage across the modules,
this module needed to be updated to reflect those conventions.
No functional code changes were made.
* Create an AWS Nat Gateway.
* Delete an AWS Nat Gateway.
* If Nat Gateway exist in subnet and the option is passed to not create one, it will then return the Nat Gateway object.
* return a proper result set for getmaster/getslave
when not on a master/slave.
This allows for a cleaner error handling.
* A more uniform return of result keys for getmaster/slave
* rename archive -> arcfile (where it's a file descriptor)
* additional return
* simplify logic around 'archive?' flag
* maintain os separator after arcroot
* use function instead of lambda for filter, ensure file exists before file.cmp'ing it
* track errored files and fail if there are any
* Don't include the archive in the archive if it falls within an archived path
* If remove=True and the archive would be in an archived path, fail.
* Fix single-file zip file compression
* Add more documentation about 'state' return
This manages compressed files or archives of many compressed files. You can maintain or update .gz, .bz2 compressed files, .zip archives, or tarballs compressed with gzip or bzip2.
Possible use cases:
* Back up user home directories
* Ensure large text files are always compressed
* Archive trees for distribution
This module was using python 2.6 string .format().
To enable the module to run on python2.4, replace
the .format formatting with '%s' based string formatting.
There was also a use of a 'filename' variable in the
NosystemdTimezone.get() method that was never set.
An import of 'os' was also added for clarity.
Replace the use of python 2.6+ string .format() method
use with the python 2.4 compatible '%s' formatting to
make the github_key module py2.4 compatible.
policy should now accept and handle correctly both data structures or JSON strings
removed unused tag_set var
refactored code to make conditions clearer
rebased to allow for ceph changes, left ceph update on todo list
* Add `active` and `inactive` states to the lvol module
* Honor the previous state of the changed variable
* Move active/inactive states to active boolean parameter
* Bump version_added to make Travis happy
* Avoid bailing early is size isn't specified
* Add invocation examples
* Move "no size" up for code clarity
A number of coding conventions have been adopted for new F5 modules
that are in development. To ensure common usage across the modules,
this module needed to be updated to reflect those conventions.
Additionally, this patch fixes a couple bugs in the module that were
preventing it from being idempotent.
The user adding part is not properly guarded by a try...except
block, so pymongo exceptions can escape from it.
Also there's a double-guarding where roles are given.
Fixes: #2575
A number of coding conventions have been adopted for new F5 modules
that are in development. To ensure common usage across the modules,
this module needed to be updated to reflect those conventions.
No functional code changes were made.
* zypper cleanup checks for failure/diff
* move check for changed/failed from functions back to main
* handle all cases identially
* generate diff together
* fix module name
* Add ipmi modules for power and boot management
* ipmi_power - module for power management
Parameters:
- name
- port
- user
- password
- state
- timeout
* ipmi_boot - module for boot order management
Parameters:
- name
- port
- user
- password
- bootdev
- state
- persist
- uefi
* Fixed copyright
* Supported check mode
Also added description for RETURN
* Added ipmi to list of excludes of tests for python2.4
* added no_log=True for secrets
* added type for port and mark bootdev as required field
* New module wakeonlan to send out magic WOL packets
For a local project managing desktop Windows systems at an elementary school, we want to send out wake-on-lan packets to all systems before continuing using Ansible.
That is the purpose of this module.
PS We can make this module idempotent by implementing arping support using scapy. At some point I may add this, at this time I simply plan on using wait_for to check if the system is online.
* Improved documentation and notes
* Improve the documentation a bit
* Fix Travis warnings and review remarks
* Fix exception handling to support both python2 and python3
* Documentation changes
* added zypper refresh support
* removed trailing symbols
* added forced zypper refresh support similar to update_cache for apt module
* removed unnecessary blocks and cleaned up the logic for refresh
* added update_cache as alias for refresh to be similar to apt/yum module
* update zypper module according to comments
* priority needs zypper version >= 1.12.25
* gpgcheck needs zypper version >= 1.6.2
* output warnings if version not sufficient for option
* fixes#2548
* Add os_stack module for create and delete stack
* Add ansible module for creating and deleting heat stack
* Parameters:
- stack name
- template
- environment_files (list)
- parameters (dict)
- timeout
- rollback
- state: In a near futur I would like to improve
this module by providing a way updating the stack
if already exist. Shade doesn't offer this functionality
AFAIK
* Add update stack feature
* Update added_version and return doc
* Add copyright for os_stack module
* Add wait user choice and minor fixes
* Remove Todo for Shade 1.8.0 and bad line example
* Add documentation for the return values
* Fix type on return value
* Fix yaml syntax
* Cast message to string instead
* add missing check mode
* Fix Kubernetes API auth regression from 393e43b8
Commit 393e43b8 renames url_username and url_password to username and
password, which breaks authentication to a Kubernetes API endpoint as
fetch_url() in ansible.module_utils.urls relies on url_username and
url_password being set.
* Add aliases for clustering/kubernetes.py
- username as alias for url_username
- password as alias for url_password
2.1 introduces overwrite_multiple, which can overwrite more than one
exisiting repo (with matching alias or URL). Allow more than 2 repos to
be overwritten, since openSuSE allow more than one repo with the same
URL if the alias is different.
* Fix bug where we were actually checking for the availability of the
requested package name and not 'sqlports' even if that was the goal.
* Add check that the sqlports database file exists before using it.
* Sprinkle some debug messages for an easier time following the code when
developing.
* Such package names requires at least OpenBSD 6.0.
* Rework get_package_state() to use 'pkg_info -Iq inst:' instead of 'pkg_info -e'
because it understands the branch syntax. It also means we can get rid of
some additional special handling.
This was suggested by Marc Espie:
http://marc.info/?l=openbsd-tech&m=146659756711614&w=2
* Drop get_current_name() because the use of 'pkg_info -Iq inst:' in
get_package_state() means we already have that information available without
needing to do custom parsing. This was also necessary because a name such as
"postfix%stable" does not in itself contain the version information necessary
for the custom parsing. pkg_info -Iq translates such a name to the actual
package name seamlessly.
* Add support for finding more than one package for the supplied package name
which may happen if we only supply a stem.
A number of coding conventions have been adopted for new F5 modules
that are in development. To ensure common usage across the modules,
this module needed to be updated to reflect those conventions.
No functional code changes were made.
A number of coding conventions have been adopted for new F5 modules
that are in development. To ensure common usage across the modules,
this module needed to be updated to reflect those conventions.
No functional code changes were made.
The external_ids 'type' was not defined in the argument spec of
openvswitch_bridge. This caused 'external_ids' to be converted to a
string leading to an error when later calling exp_external_ids.items().
A number of coding conventions have been adopted for new F5 modules
that are in development. To ensure common usage across the modules,
this module needed to be updated to reflect those conventions.
No functional code changes were made.
* influxdb: retention_policy: infinite retention is returned as 0 from influxdb
* influxdb: retention_policy: database_name argument should be required
A number of coding conventions have been adopted for new F5 modules
that are in development. To ensure common usage across the modules,
this module needed to be updated to reflect those conventions.
Prior to 2.1, imports of module_utils was actually a preprocessor-like
substitution. So importing at the bottom helped preserve line numbers when
debugging. We'll be moving these to the top of files as time goes on.
Signed-off-by: Javier M. Mellid <jmunhoz@igalia.com>
Ceph Object Gateway (Ceph RGW) is an object storage interface built on top of
librados to provide applications with a RESTful gateway to Ceph Storage
Clusters:
http://docs.ceph.com/docs/master/radosgw/
This patch adds the required bits to handle buckets with the RGW S3 RESTful API
properly.
It sticks to the AWS behaviour where possible while avoiding not yet
implemented features in the Ceph RGW API.
Signed-off-by: Javier M. Mellid <jmunhoz@igalia.com>
I am taking over much of the development of modules old
and new for F5 and to meet the coding conventions for our
modules, I am aiming at newer python versions.
Therefore, I will be excluding python 2.4
This patch adds support for the server_port module. It
additionally updates the documentation in the module for
it.
The changes were tested in the f5-ansible repository to
ensure no breaking changes were made. This argument allows
modules to be used on BIG-IPs that are listening on
non-standard ports.
PR #1299 introduced the service_address parameter but specified a
default value of localhost. This is a breaking change; prior to that,
the consul module would always assume that the service should advertise
the address that the Consul agent was listening on. With this change,
the consul module will now default to advertising localhost to all nodes
for the service, which isn't the desired behavior. This changes the
default back to None which is the implicit default prior to #1299.
* Implement mounts in proxmox module
mounts in proxmox are the additionnal disk devices set in a guests.
We handle the mounts the same way that netif devices, using a
dictionnary with keys being mp0, mp1,…
* Add version_added
Seems to be a requirement but I didn't see that anywhere.
Hope it'll fix the travis-ci issue
