willthames
12005a1cd0
Move more responsibility to common EC2 module
...
Moved `AWS_REGIONS` into `ec2` module
Created `ec2_connect` method in `ec2` module
Updated modules able to use `ec2_connect` and `AWS_REGIONS`
2013-12-17 14:07:24 +10:00
jctanner
cd3144af5d
Merge pull request #5178 from cavassin/devel
...
Prevents UnicodeEncodeError
2013-12-16 13:23:16 -08:00
James Tanner
f3a4705a9c
Revert "Merge pull request #4874 from leth/editable_install"
...
This reverts commit 15b89b45e13d836a1ab7
2013-12-16 15:57:03 -05:00
jctanner
15b89b45e1
Merge pull request #4874 from leth/editable_install
...
Fix setup.py to work with 'pip install -e .'
2013-12-16 11:22:45 -08:00
jctanner
3d836a1ab7
Merge pull request #5247 from jeromew/ansible_ssh_alt
...
ssh_alt.py / decrease # of ssh roundtrips
2013-12-16 07:08:35 -08:00
jeromew
5c965a75f0
ssh_alt.py / decrease # of ssh roundtrips
2013-12-13 14:23:40 -05:00
jctanner
1679d83637
Merge pull request #5131 from janeznemanic/devel
...
Fix for issue #4730 - stacktrace when deferenencing a non-existent group
2013-12-13 11:00:41 -08:00
jctanner
301a1189dd
Merge pull request #5122 from willthames/openlog_str
...
Make first argument to syslog.openlog be a string
2013-12-13 08:51:48 -08:00
Ferenc Grecu
56642f9b04
Remove unused parameter from _get_config
2013-12-12 18:48:02 +02:00
Jesse Keating
8cef210aea
Make sure ssh pipes are empty before moving on
...
Resolves issue #5082
Code as it was would hit a scenario where one of the FDs was not ready for
reading the first time through -- but p.poll() would show the process as
complete. This would cause ansible to continue on, while leaving some content
left in a pipe.
The other scenario -- the one that causes the unclosed quote, is if we go
through select.select() and we do get stdout in the ready for reading -- we
read from it (9000 bytes), but that's not all that is there. Again we'd get to
the p.poll() check and it would be indeed not none, but we would have left some
of stdout on the FD and thus the json blob would be malformed.
Tested with and without full ssh debugging.
Tested with and without ControlPersist
Tested with and without ControlPersist sockets already created
2013-12-11 21:32:37 -08:00
Michael DeHaan
929f8a5c93
Had to revert commits due to async.
2013-12-10 19:24:08 -05:00
Michael DeHaan
74e4ccb59b
Revert "ssh_alt.py / decrease # of ssh roundtrips"
...
This reverts commit 7f8863f96d
2013-12-10 19:23:52 -05:00
jeromew
7f8863f96d
ssh_alt.py / decrease # of ssh roundtrips
2013-12-10 06:00:21 -05:00
jeromew
db182ba498
copy ssh.py to ssh_alt.py
2013-12-09 14:11:29 -05:00
Steve Smith
5b81f88c8f
Cast the retrieved retries var to an int before incrementing as it may be in string form.
...
For example, the following method of calculating the value will result in a type error:
appstatus_waitfor: 4 # Minutes
appstatus_delay: 5 # seconds
appstatus_retries: "{{ mins * 60 / delay }}"
2013-12-07 10:35:14 +01:00
Wanderlei Antonio Cavassin
6ba93817a9
Avoid UnicodeDecodeError exception when passing module args
2013-12-06 12:59:43 -02:00
James Tanner
bf78d8cf73
Addresses #5090 setup module was using path.is_file instead of path.isfile
2013-12-05 11:36:54 -05:00
cavassin
10f5af82f9
Prevent UnicodeEncodeError
...
Prevents UnicodeEncodeError: 'ascii' codec can't encode character, while printing shell commands output
2013-12-05 13:17:57 -02:00
jctanner
7aa35d64c2
Merge pull request #5091 from EspadaV8/5089_assemble_fix
...
#5089 hack-fix assemble module
2013-12-04 10:13:16 -08:00
Michael DeHaan
801ca96a8b
Merge pull request #5152 from sivel/too-many-ps
...
The word skipped only has 2 p's not 3
2013-12-03 16:21:11 -08:00
Matt Martz
5f0f3566a6
Skipped only has 2 p's not 3
2013-12-03 15:42:34 -06:00
Matt Martz
8873c3675b
Ensure we are looking for the right import to determine if the module_style is new. Fixes #5148
2013-12-03 15:36:33 -06:00
jctanner
2670529671
Merge pull request #5090 from dragon3/hostname_support_amazon_linux
...
hostname module: add support for Amazon Linux
2013-12-03 12:34:55 -08:00
James Tanner
d227614529
Fixes #5109 synchronize module ssh port
...
Added a parameter for dest_port and also check ansible_ssh_port inventory variable.
2013-12-03 14:48:20 -05:00
jctanner
93159cb9cd
Merge pull request #4996 from sivel/rax-module-utils
...
Implement ansible.module_utils.rax
2013-12-02 11:55:59 -08:00
Janez Nemanic
8752ae6909
Fix for issue #4730 - stacktrace when deferenencing a non-existent group
2013-12-02 18:25:43 +01:00
Will Thames
76aca4d547
Make first argument to syslog.openlog be a string
...
syslog.openlog expects its first argument to be a string.
Without this change running under ipython fails.
2013-12-02 19:11:27 +10:00
James Cammarata
9101c2af98
Fix traceback in template error detection code
...
Fixes #5081
2013-11-29 08:47:54 -06:00
Andrew Smith
eed32ea70c
dest_contents isn’t always defined, so don’t pass it around
...
I think this is also a bit of a hack since it should probably be set
before being used, I’m just not sure what it should be set to.
2013-11-28 10:59:51 +10:00
Andrew Smith
e2d03173d2
The file module doesn’t have it’s module_args reset
...
I believe that this should be reset in the same way that the copy module
does
2013-11-28 10:58:14 +10:00
Andrew Smith
7b01c83159
Passing in complex_args throws ‘unsupported parameter for module’ errors
...
When using assemble only params (e.g. remote_src) the copy (and I’m
guessing file) modules throw an error that the param isn’t supported.
Simply removing the complex_args param fixes it for me, but I’m not sure
that’s the correct thing to do
2013-11-28 10:55:35 +10:00
Andrew Smith
da44a7f0cb
I think that resultant is meant to be the contents of the combined file
...
It is used for the transfer and as a diff param but isn’t actually
defined anywhere before it’s used. This seemed like the least bad place
to set it.
2013-11-28 10:53:00 +10:00
Andrew Smith
4503413baa
ReturnData is used throughout but not actually imported
2013-11-28 10:51:04 +10:00
dragon3
d39e6fda92
hostname module: add support for Amazon Linux
2013-11-28 09:31:25 +09:00
Andrew Smith
7d007cac16
Correct the invocation of ‘_assemble_from_fragments’
2013-11-28 09:44:14 +10:00
jctanner
920bc6e75b
Merge pull request #5086 from j2sol/fix-accelerate_inventory
...
Avoid a traceback when using accelerate
2013-11-27 14:46:12 -08:00
James Tanner
b6879ca2bd
Fixes #5030 compare connection user and sudo user and disable sudo if identical
2013-11-27 17:01:53 -05:00
Jesse Keating
5522d489e3
Avoid a traceback when using accelerate
...
This bit of code is attempting to access accelerate_inventory_host,
which may not have been set/created. This will cause a traceback.
Instead use getattr with a fallback to False.
2013-11-27 13:58:11 -08:00
James Tanner
12ed39ef7b
Fixes #5056 Append new hosts to the groups cache
2013-11-27 13:04:31 -05:00
James Cammarata
1f80aa768a
Fix bug in error detection code, where a zero-length string was causing a traceback
...
Fixes #5064
2013-11-27 11:57:15 -06:00
Brian Coca
65885feeeb
fixed typo for assemble function
2013-11-26 08:30:28 -05:00
James Tanner
b8146e3bc7
Fixes #4979 Check for the correct context when inside the inventory_hostnames plugin
2013-11-25 10:57:10 -05:00
James Tanner
903c4cae7b
Fixes #5031 Template the delay value and cast to float for loops
2013-11-25 10:13:55 -05:00
Antonio Zanardo
8dbd91b5ad
fix typo in deprecation warning
2013-11-23 19:15:51 -02:00
James Tanner
bca2634d54
Fix missing eval for string search in ssh controlpersist
2013-11-22 12:22:53 -05:00
James Tanner
a16fe923ed
Addresses #5011 check for proper string in smartos ssh error output
2013-11-22 12:13:24 -05:00
jctanner
5c84d7e445
Merge pull request #5002 from ovcharenko/devel
...
Allow to specify ansible_ssh_private_key_file location related to user home directory
2013-11-22 06:39:07 -08:00
James Tanner
512ebdb971
Revert "Merge pull request #5001 from ovcharenko/devel"
...
This reverts commit d6c3103a00b11f96eaa4
2013-11-22 00:09:37 -05:00
Aleksey Ovcharenko
9af44b1b42
Update to 4 space indent
2013-11-22 04:20:14 +02:00
Aleksey Ovcharenko
30678e04ac
Make tests happy
2013-11-22 04:06:10 +02:00
