This fixes::
Traceback (most recent call last):
File "/home/jpic/.ansible/tmp/ansible-tmp-1435080800.61-38257321141340/lxc_container", line 3353, in <module>
main()
File "/home/jpic/.ansible/tmp/ansible-tmp-1435080800.61-38257321141340/lxc_container", line 1712, in main
if not HAS_LXC:
NameError: global name 'HAS_LXC' is not defined
This fixes::
Traceback (most recent call last):
File "/home/jpic/.ansible/tmp/ansible-tmp-1435080916.98-133068627776311/lxc_container", line 3355, in <module>
main()
File "/home/jpic/.ansible/tmp/ansible-tmp-1435080916.98-133068627776311/lxc_container", line 1724, in main
lxc_manage.run()
File "/home/jpic/.ansible/tmp/ansible-tmp-1435080916.98-133068627776311/lxc_container", line 1605, in run
action()
File "/home/jpic/.ansible/tmp/ansible-tmp-1435080916.98-133068627776311/lxc_container", line 1145, in _started
self._config()
File "/home/jpic/.ansible/tmp/ansible-tmp-1435080916.98-133068627776311/lxc_container", line 714, in _config
_, _value = option_line.split('=')
ValueError: too many values to unpack
With such a task::
tasks:
- lxc_container:
name: buildbot-master
container_config:
- "lxc.mount.entry = {{ cwd }} srv/peopletest none defaults,bind,uid=0,create=dir 0 0"
The `--noreplace` argument to `emerge` is generally coupled with
`--newuse` or `--changed-use`, and can be used instruct Portage to
rebuild a package only if necessary. Simply checking to see if the
package is already installed using `equery` is not sufficient to
determine if any changes would be made, so that step is skipped when
the `noreplace` module argument is specified. The module then falls back
to parsing the output from `emerge` to determine if anything changed. In
check mode, `emerge` is called with `--pretend`, so it produces
different output, and the parsing fails to correctly infer that a change
would be made.
This commit adds another regular expression to check when running in
check mode that matches the pretend output from `emerge`.
Signed-off-by: Dustin C. Hatch <dustin@hatch.name>
When running in check mode, the *portage* module always reports that no
changes were made, even if the requested packages do not exist on the
system. This is because it was erroneously expecting `emerge --pretend`
to produce the same output as `emerge` by itself would, and attempts to
parse it. This is not correct, for several reasons. Most specifically,
the string for which it is searching does not exist in the pretend
output. Additionally, `emerge --pretend` always prints the requested
packages, whether they are already installed or not; in the former case,
it shows them as reinstalls.
This commit adjusts the behavior to rely on `equery` alone when running
in check mode. If `equery` reports at least one package is not
installed, then nothing else is done: the system will definitely be
changed.
Signed-off-by: Dustin C. Hatch <dustin@hatch.name>
Due to a spurious newline we corrupted the payload. It depends on the order of the headers and if there were headers added by vSphere.
The Accept header was also not needed.
Starting point for a reference when doing pull request reviews.
If something doesn't meet the guidelines we can point people
at them. If something is bad but is not mentioned in the
guidelines, we should add it here.
The lxc container restart state does not ensure that the container
is in fact started unless another config or command is passed into
the task. to fix this the module simply needs to have the function
call added ``self._container_startup()`` after the container is
put into a stopped state.
Signed-off By: Kevin Carter <kevin.carter@rackspace.com>
* Refactor code to be more robust. Run main logic inside a try {} catch {}
block. If there is any error, bail out and log all the command output
automatically.
* Rely on error code generated by chocolatey instead of scraping text
output to determine success/failure.
* Add support for unattended installs: (`-y` flag is a requirement by
chocolatey)
* Before (un)installing, check existence of files.
* Use functions to abstract logic
* The great rewrite of 0.9.9, the `choco` interface has changed, check
if chocolatey is installed and an older version. If so upgrade to
latest.
* Allow upgrading packages that are already installed
* Use verbose logging for chocolate actions
* Adding functionality to specify a source for a chocolatey repository.
(@smadam813)
* Removing pre-determined sources and adding specified source url in
it's place. (@smadam813)
Contains contributions from:
* Adam Keech <akeech@chathamfinancial.com> (@smadam813)
The python2-lxc library has been uploaded to pypi as such this commit
updates the requirements and doc information for the module such that
it instructs the user to install the pip package "lxc-python2" while
also noting that the package could be gotten from source as well. In
the update comments have been added to the requirements list which
notes where the package should come from,
Closes-Bug: https://github.com/ansible/ansible-modules-extras/issues/550
puppetmaster was used to determine if `agent` or `apply` should be used. But puppetmaster is not required by puppet per default. Puppet may have a config or could find out by itself (...) where the puppet master is.
It changed the code so we only use `apply` if a manifest was passed, otherwise we use `agent`.
This also fixes the example, which did not work the way without this change.
~~~
# Run puppet agent and fail if anything goes wrong
- puppet
~~~
puppet may be configured to operate in `--noop` mode per default.
That is why we must pass a `--no-noop` to make sure, changes are going to be applied.
There is a growing pattern for using ansible to orchestrate runs of
existing puppet code. For instance, the OpenStack Infrastructure team
started using ansible for this very reason. It also turns out that
successfully running puppet and interpreting success or failure is
harder than you'd expect, thus warranting a module and not just a shell
command.
This is ported in from
http://git.openstack.org/cgit/openstack-infra/ansible-puppet
This is necessary for instance when setting MX records on the root of a domain.
This is different than leaving record_name out completely which has the same
behaviour as before
This is necessary for instance when setting CNAMEs that point to the root
of the domain. This is different than leaving record_value out completely
which has the same behaviour as before
MAN page states the following :
Rules for traffic not destined for the host itself but instead for
traffic that should be routed/forwarded through the firewall should
specify the route keyword before the rule (routing rules differ
significantly from PF syntax and instead take into account netfilter
FORWARD chain conventions). For example:
ufw route allow in on eth1 out on eth2
This commit introduces a new parameter "route=yes/no" to allow just that.
The alternatives module parses the output of update-alternatives, but the expected English phrases may not show up if the system locale is not English. Setting LC_ALL=C when invoking update-alternatives fixes this problem.
- Backport config file handling from the DNF module rewrite #527
(Current config handling does not work with dnf and leads to
tracebacks when run as an unprivileged user).
- Make a mandatory requirement on yum-utils (for /usr/bin/repoquery)
because none of the fallback code works for dnf (it's unported yum API
code).
Both of these issues will be fixed better in the dnf rewrite when it is
feature complete.
Fixes#471
Added functionality to set rules for egress using this module at these are very similar. The only real difference is that egress firewall API uses the networkid. That is why the new arguments `type` for choosing `egress` or `ingress` and `network` was added.
For `type=ingress`, which is the default, `ip_address` is required and for `type=egress` the argument `network` is required.
The clone state was removed in favor of making the module more
declarative. This change was done in response to review in PR #328
from @bcoca.
In the commit new examples were created on how this feature works.
This commit adds the overlayfs type to the lxc_container module. In
Adding the overlayfs type the commit adds the ability to clone a
container. While cloning is not locked down to only the overlayfs
container backend it is of particular interest when using the overlayfs
backend as it provides for amazingly fast snapshots.
Changes to the resource types and documentation have been added on how
the new backend type can be used along with the clone operation.
This PR addresses a question asked on the original merged pull request
for overlayfs support which came from @fghaas on PR
"https://github.com/ansible/ansible-modules-extras/pull/123".
The overlayfs archive function is a first class function and will
allow for the containers to be backed-up using all methods which
brings support up to that of all other storage backends.
The HipChat module declares to support check_mode,
but the message is sent in any case.
With this, if executed in check mode, the module will exit
before actually sending the message to HipChat.
It will return changed=False, as per the convention
for notifications modules.
The documentation for the `state` field is not very clear.
It says possible values are "installed, uninstalled" and default value is "present"
The examples below alow uses `present` and `absent`.
This patch uses "absent" and "present" instead of "installed" and "uninstalled"
Moreover, this is consistent with other packaging modules, like homebrew itself
This submission makes extensive use of the python-consul library and this is required
as a dependency and can be installed from pip.
The tests were written to target a vagrant cluster which can be setup by following the
instructions here http://github.com/sgargan/consul-vagrant
The 'msg' alias for 'subject' isn't in the documentation, so adding it.
In the gmail example, it uses both the 'subject' and 'msg' params, but 'msg' is an alias of 'subject', so you are essentially declaring the same param twice. If you use this example, then no subject is sent (I tested with gmail). Documentation example is updated to use 'body' as intended.
Also, updated the simple example to use 'subject' instead of the 'msg' alias since it is more explicit.
This manages environment variables in Vixie crontabs. It includes
addition/removal/replacement of variables and ordering via the
insertbefore/insertafter parameters.
Some devices return their description on multiple lines such as:
lldp.eth0.chassis.descr=cisco CISCO7609-S running on
Cisco IOS Software, c7600s72033_rp Software (c7600s72033_rp-IPSERVICESK9-M), Version 12.2(33)SRE3, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Wed 26-Jan-11 06:54 by prod_rel_team
The generated fact will result as:
"descr": "cisco CISCO7609-S running on"
This patch fixes the line wrapping to return the full description
handling line breaks:
"descr": "cisco CISCO7609-S running on\nCisco IOS Software, c7600s72033_rp Software (c7600s72033_rp-IPSERVICESK9-M), Version 12.2(33)SRE3, RELEASE SOFTWARE (fc1)\nTechnical Support: http://www.cisco.com/techsupport\nCopyright (c) 1986-2011 by Cisco Systems, Inc.\nCompiled Wed 26-Jan-11 06:54 by prod_rel_team"
The device option was already implemented but omitted from docs and allowed
choices. With the addition of device, a devices failover_state can be
determined.
Fix bug in ansible get_package_state and get_current_version that breaks when there are multiple versions of a package installed and there is a list of packages to install.
The previous implementation used 'zip' to match requested names to installed names which fails, because rpm outputs multiple lines per package when there are multiple versions.
Testcase: Install opensuse, install multiple kernel versions (happens by update)
Before patch: calling
zypper: state=present for name={{item}}
with_items:
- kernel-desktop
- git
leads to ansible aborting.
After the patch ansible performs as expected and makes sure both packages are present.
Also the last version number is used for further update information in this version (before if only one package name was given the oldest version number was used).
According the patch(1) manpage:
The --directory option change to the directory dir immediately, before
doing anything else.
Thus if file is not relative to dir and making file absolute ensure that
patch will find it.
Prior to openssh 6.4, ssh-keygen -F returned 0 (and no output) when no
host was found. After then, it instead returned 1 and no output. This
revised code behaves correctly with either behaviour. There is
currently no other code path that results in exit(1) and no output.
The option parsing object within the module was performing a split
on an '=' sign and assuming that there would only ever be one '='
in a user provided option. Sadly, the assumption is incorrect and
the list comprehension that is building the options list needs to
be set to split on the first occurrence of an '=' sign in a given
option string. This commit adds the required change to make it
possible for options to contain additional '=' signs and be handled
correctly.
This allows one to enable or disable a node, useful for when doing
maintenance on a node to prevent connections from being attempted to it.
This will completely disable the node for any pool it might be in.
* update expected inclusion version
* fix consistency on enabled/absent (now enabled/disabled)
* safely import boto per now style of single-exit and proper JSON
* use new `required_together` module style
Cloudtrail is the AWS auditing configuration. It's fairly simple, but also very important to configuration management/devops/security to ensure it remains enabled. That's why I created it as a module.
- Changes are no longer erroneously reported on RHEL (#12)
- Adding new link groups on Debian works again.
- This was broken in a previous commit by assuming the OS was RHEL
if `update-alternatives --query <name>` had a return code of 2
- Prefer `--display` over `--query` for determining available
alternatives
- --display is more distro-agnostic and simplifies the code
- Fix missing `msg=` in `fail_json` call when `link` is missing
- Document that `link` is required on RHEL-based distros
Tested on Ubuntu 12.04+ and CentOS 6/7
This update will allow people to add a color bar at the front of a
Slack notification using the default 3 colors by name Slack specify
(good, warning, danger).
If no color is specified, or the default is used (normal) then no bar
will be added.
Description and example also added in this update.
Color bars are added by using the attachments json object inside the
payload - this is a very simplistic implementation as using custom
colors or adding titles or other formatting are not included in this
update and if needed I’m sure somebody else can spend the time to add
them later…
Tested with ansible 1.7
Occasionally, `lvcreate` will prompt on stdin for confirmation. In
particular, this may happen when the volume is being created close to
the location on disk where another volume existed previously. When this
happens, Ansible will hang indefinitely with no indication of the
problem. To work prevent this problem, the `--yes` command-line argument
can be passed to `lvcreate`, which will instruct it not to prompt.
Signed-off-by: Dustin C. Hatch <dustin@hatch.name>
* Add support for check mode
* Use "pkgin search" to guarantee 0 or 1 result
* Edit documentation for style, new feature, etc.
* General refactoring
* Lay some groundwork for future support of "state=latest"
These are all the code changes from Brian's review:
* change #! line
* rename "host" to "name" [keep as alias]
* make documentation clearer
* imports 1 per line
* use get_bin_path to find ssh-keygen
* key not actually required when removing host
The known_hosts module lets you add or remove a host from the
known_hosts file. This is useful if you're going to want to use the
git module over ssh, for example. If you have a very large number of
host keys to manage, you will find the template module more useful.
This was pull request 7840 from the old ansible repo, which was
accepted-in-principle but not yet merged. The mailing list thread
reading it is:
https://groups.google.com/forum/#!topic/ansible-devel/_e7H_VT6UJE/discussion
Analyze the given token and use the old webhook format if the token
is old style and use the new format if the token is new style. Make
domain optional with new-style tokens.
Fixes#157
Fix `changed` status that always returns False with composer.
This [previous PR](https://github.com/ansible/ansible-modules-extras/pull/61) had fixed the issue but because of a [Composer recent change](cb336a5416) stderr is now used for reporting information meant for humans while stdout is more for the output of the command.
This PR would definilty solve this issue.
The previous version of this code was supporting only locales using the
format "<language>_<territory>.<charset>". But all the locales that
doesn't have this format were not installable (such as "fr_FR" or
"fr_FR@euro").
Also, if an invalid locales was provided, the module kept sending a
"changed" status.
Now :
* if the user provides an invalid locales, the module failed. Locales
are verified using /etc/locale.gen or /usr/share/i18n/SUPPORTED if
Ubuntu
* Every types of valid locales are now supported.
* The locale module was not working on Archlinux, as there's no space
between the "#" and the locale. This is now supported. Credits goes
to danderson189, this is his code.
This module was tested on debian jessie, ubuntu 14 LTS and last
Archlinux.
