vyos_command 2.3 (#18994)

* Peter's new module_utils/vyos
* Update vyos_command
* Restore `set terminal length $ANSIBLE_VYOS_TERMINAL_LENGTH` in vyos
* vyos_command tests
* Remove provider mentions from vyos_command
* Extend get_config to take (and cache) various `show configuration` commands

lib/ansible/module_utils/vyos2.py

@@ -0,0 +1,88 @@
+# This code is part of Ansible, but is an independent component.
+# This particular file snippet, and this file snippet only, is BSD licensed.
+# Modules you write using this snippet, which is embedded dynamically by Ansible
+# still belong to the author of the module, and may assign their own license
+# to the complete work.
+#
+# (c) 2016 Red Hat Inc.
+#
+# Redistribution and use in source and binary forms, with or without modification,
+# are permitted provided that the following conditions are met:
+#
+#    * Redistributions of source code must retain the above copyright
+#      notice, this list of conditions and the following disclaimer.
+#    * Redistributions in binary form must reproduce the above copyright notice,
+#      this list of conditions and the following disclaimer in the documentation
+#      and/or other materials provided with the distribution.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+# IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+# USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+
+_DEVICE_CONFIGS = {}
+
+def get_config(module, target='commands'):
+    cmd = ' '.join(['show configuration', target])
+
+    try:
+        return _DEVICE_CONFIGS[cmd]
+    except KeyError:
+        rc, out, err = module.exec_command(cmd)
+        if rc != 0:
+            module.fail_json(msg='unable to retrieve current config', stderr=err)
+        cfg = str(out).strip()
+        _DEVICE_CONFIGS[cmd] = cfg
+        return cfg
+
+def run_commands(module, commands, check_rc=True):
+    assert isinstance(commands, list), 'commands must be a list'
+    responses = list()
+
+    for cmd in commands:
+        rc, out, err = module.exec_command(cmd)
+        if check_rc and rc != 0:
+            module.fail_json(msg=err, rc=rc)
+        responses.append(out)
+    return responses
+
+def load_config(module, commands, commit=False, comment=None, save=False):
+    assert isinstance(commands, list), 'commands must be a list'
+    commands.insert(0, 'configure')
+
+    for cmd in commands:
+        rc, out, err = module.exec_command(cmd, check_rc=False)
+        if rc != 0:
+            # discard any changes in case of failure
+            module.exec_command('exit discard')
+            module.fail_json(msg='configuration failed')
+
+    diff = None
+    if module._diff:
+        rc, out, err = module.exec_command('compare')
+        if not out.startswith('No changes'):
+            rc, out, err = module.exec_command('show')
+            diff = str(out).strip()
+
+    if commit:
+        cmd = 'commit'
+        if comment:
+            cmd += ' comment "%s"' % comment
+        module.exec_command(cmd)
+
+    if save:
+        module.exec_command(cmd)
+
+    if not commit:
+        module.exec_command('exit discard')
+    else:
+        module.exec_command('exit')
+
+    if diff:
+        return diff

lib/ansible/modules/network/vyos/vyos_command.py

@@ -16,15 +16,17 @@
 # along with Ansible.  If not, see <http://www.gnu.org/licenses/>.
 #
 
-ANSIBLE_METADATA = {'status': ['preview'],
+ANSIBLE_METADATA = {
-                    'supported_by': 'community',
+    'status': ['preview'],
-                    'version': '1.0'}
+    'supported_by': 'community',
+    'version': '1.0',
+}
 
 DOCUMENTATION = """
 ---
 module: vyos_command
 version_added: "2.2"
-author: "Peter Sprygada (@privateip)"
+author: "Nathaniel Case (@qalthos)"
 short_description: Run one or more commands on VyOS devices
 description:
   - The command module allows running one or more commands on remote
@@ -36,7 +38,6 @@ description:
     use a custom pager that can cause this module to hang.  If the
     value of the environment variable C(ANSIBLE_VYOS_TERMINAL_LENGTH)
     is not set, the default number of 10000 is used.
-extends_documentation_fragment: vyos
 options:
   commands:
     description:
@@ -70,7 +71,7 @@ options:
   retries:
     description:
       - Specifies the number of retries a command should be tried
-        before it is considered failed.  The command is run on the
+        before it is considered failed. The command is run on the
         target device every retry and evaluated against the I(wait_for)
         conditionals.
     required: false
@@ -78,8 +79,8 @@ options:
   interval:
     description:
       - Configures the interval in seconds to wait between I(retries)
-        of the command.  If the command does not pass the specified
+        of the command. If the command does not pass the specified
-        conditional, the interval indicates how to long to wait before
+        conditions, the interval indicates how long to wait before
         trying the command again.
     required: false
     default: 1
@@ -90,30 +91,22 @@ notes:
 """
 
 EXAMPLES = """
-# Note: examples below use the following provider dict to handle
+tasks:
-#       transport and authentication to the node.
+  - name: show configuration on ethernet devices eth0 and eth1
-vars:
+    vyos_command:
-  cli:
+      commands:
-    host: "{{ inventory_hostname }}"
+        - show interfaces ethernet {{ item }}
-    username: vyos
+    with_items:
-    password: vyos
+      - eth0
-    transport: cli
+      - eth1
 
-- vyos_command:
+  - name: run multiple commands and check if version output contains specific version string
-    commands:
+    vyos_command:
-      - show interfaces ethernet {{ item }}
+      commands:
-    provider: "{{ cli }}"
+        - show version
-  with_items:
+        - show hardware cpu
-    - eth0
+      wait_for:
-    - eth1
+        - "result[0] contains 'VyOS 1.1.7'"
-
-- vyos_command:
-    commands:
-      - show version
-      - show hardware cpu
-    wait_for:
-      - "result[0] contains 'VyOS 1.1.7'"
-    provider: "{{ cli }}"
 """
 
 RETURN = """
@@ -128,7 +121,7 @@ stdout_lines:
   type: list
   sample: [['...', '...'], ['...'], ['...']]
 failed_conditions:
-  description: The conditionals that failed
+  description: The conditionals that have failed
   returned: failed
   type: list
   sample: ['...', '...']
@@ -137,33 +130,61 @@ warnings:
   returned: always
   type: list
   sample: ['...', '...']
+start:
+  description: The time the job started
+  returned: always
+  type: str
+  sample: "2016-11-16 10:38:15.126146"
+end:
+  description: The time the job ended
+  returned: always
+  type: str
+  sample: "2016-11-16 10:38:25.595612"
+delta:
+  description: The time elapsed to perform all operations
+  returned: always
+  type: str
+  sample: "0:00:10.469466"
 """
-import ansible.module_utils.vyos
+import time
-from ansible.module_utils.basic import get_exception
+
-from ansible.module_utils.netcli import CommandRunner
+from ansible.module_utils.local import LocalAnsibleModule
-from ansible.module_utils.netcli import AddCommandError, FailedConditionsError
+from ansible.module_utils.netcli import Conditional
-from ansible.module_utils.network import NetworkModule, NetworkError
+from ansible.module_utils.network_common import ComplexList
 from ansible.module_utils.six import string_types
+from ansible.module_utils.vyos2 import run_commands
 
 VALID_KEYS = ['command', 'output', 'prompt', 'response']
 
+
 def to_lines(stdout):
     for item in stdout:
         if isinstance(item, string_types):
             item = str(item).split('\n')
         yield item
 
-def parse_commands(module):
+
-    for cmd in module.params['commands']:
+def parse_commands(module, warnings):
-        if isinstance(cmd, string_types):
+    command = ComplexList(dict(
-            cmd = dict(command=cmd, output=None)
+        command=dict(key=True),
-        elif 'command' not in cmd:
+        prompt=dict(),
-            module.fail_json(msg='command keyword argument is required')
+        response=dict(),
-        elif cmd.get('output') not in [None, 'text']:
+    ))
-            module.fail_json(msg='invalid output specified for command')
+    commands = command(module.params['commands'])
-        elif not set(cmd.keys()).issubset(VALID_KEYS):
+
-            module.fail_json(msg='unknown keyword specified')
+    for index, cmd in enumerate(commands):
-        yield cmd
+        if module.check_mode and not cmd['command'].startswith('show'):
+            warnings.append('only show commands are supported when using '
+                            'check mode, not executing `%s`' % cmd['command'])
+        else:
+            if cmd['command'].startswith('conf'):
+                module.fail_json(msg='vyos_command does not support running '
+                                     'config mode commands.  Please use '
+                                     'vyos_config instead')
+        commands[index] = module.jsonify(cmd)
+
+    return commands
+
 
 def main():
     spec = dict(
@@ -177,63 +198,48 @@ def main():
         interval=dict(default=1, type='int')
     )
 
-    module = NetworkModule(argument_spec=spec,
+    module = LocalAnsibleModule(argument_spec=spec, supports_check_mode=True)
-                           connect_on_load=False,
-                           supports_check_mode=True)
 
-    commands = list(parse_commands(module))
-    conditionals = module.params['wait_for'] or list()
 
     warnings = list()
+    commands = parse_commands(module, warnings)
 
-    runner = CommandRunner(module)
+    wait_for = module.params['wait_for'] or list()
+    conditionals = [Conditional(c) for c in wait_for]
 
-    for cmd in commands:
+    retries = module.params['retries']
-        if module.check_mode and not cmd['command'].startswith('show'):
+    interval = module.params['interval']
-            warnings.append('only show commands are supported when using '
+    match = module.params['match']
-                            'check mode, not executing `%s`' % cmd['command'])
-        else:
-            if cmd['command'].startswith('conf'):
-                module.fail_json(msg='vyos_command does not support running '
-                                     'config mode commands.  Please use '
-                                     'vyos_config instead')
-            try:
-                runner.add_command(**cmd)
-            except AddCommandError:
-                exc = get_exception()
-                warnings.append('duplicate command detected: %s' % cmd)
 
-    for item in conditionals:
+    for _ in range(retries):
-        runner.add_conditional(item)
+        responses = run_commands(module, commands)
 
-    runner.retries = module.params['retries']
+        for item in conditionals:
-    runner.interval = module.params['interval']
+            if item(responses):
-    runner.match = module.params['match']
+                if match == 'any':
+                    conditionals = list()
+                    break
+                conditionals.remove(item)
 
-    try:
+            if not conditionals:
-        runner.run()
+                break
-    except FailedConditionsError:
-        exc = get_exception()
-        module.fail_json(msg=str(exc), failed_conditions=exc.failed_conditions)
-    except NetworkError:
-        exc = get_exception()
-        module.fail_json(msg=str(exc))
 
-    result = dict(changed=False, stdout=list())
+            time.sleep(interval)
 
-    for cmd in commands:
+    if conditionals:
-        try:
+        failed_conditions = [item.raw for item in conditionals]
-            output = runner.get_command(cmd['command'])
+        msg = 'One or more conditional statements have not been satisfied'
-        except ValueError:
+        module.fail_json(msg=msg, falied_conditions=failed_conditions)
-            output = 'command not executed due to check_mode, see warnings'
-        result['stdout'].append(output)
 
-    result['warnings'] = warnings
+    result = {
-    result['stdout_lines'] = list(to_lines(result['stdout']))
+        'changed': False,
+        'stdout': responses,
+        'warnings': warnings,
+        'stdout_lines': list(to_lines(responses)),
+    }
 
     module.exit_json(**result)
 
 
 if __name__ == '__main__':
     main()
-

lib/ansible/plugins/terminal/vyos.py

@@ -19,6 +19,7 @@
 from __future__ import (absolute_import, division, print_function)
 __metaclass__ = type
 
+import os
 import re
 
 from ansible.plugins.terminal import TerminalBase
@@ -38,9 +39,12 @@ class TerminalModule(TerminalBase):
         re.compile(r"\n\s+Set failed"),
     ]
 
+    terminal_length = os.getenv('ANSIBLE_VYOS_TERMINAL_LENGTH', 10000)
+
     def on_open_shell(self):
         try:
             self._exec_cli_command('set terminal length 0')
+            self._exec_cli_command('set terminal length %s' % self.terminal_length)
         except AnsibleConnectionFailure:
             raise AnsibleConnectionFailure('unable to set terminal parameters')
 

test/units/modules/network/vyos/fixtures/show_version

@@ -0,0 +1,14 @@
+Version:      VyOS 1.1.7
+Description:  VyOS 1.1.7 (helium)
+Copyright:    2016 VyOS maintainers and contributors
+Built by:     maintainers@vyos.net
+Built on:     Wed Feb 17 09:57:31 UTC 2016
+Build ID:     1602170957-4459750
+System type:  x86 64-bit
+Boot via:     image
+Hypervisor:   VMware
+HW model:     VMware Virtual Platform
+HW S/N:       VMware-42 3c 26 25 44 c5 0a 91-cf 2c 97 2b fe 9b 25 be
+HW UUID:      423C2625-44C5-0A91-CF2C-972BFE9B25BE
+Uptime:       01:08:20 up 52 days,  2:13,  1 user,  load average: 0.00, 0.01, 0.05
+

test/units/modules/network/vyos/test_vyos_command.py

@@ -0,0 +1,145 @@
+# (c) 2016 Red Hat Inc.
+#
+# This file is part of Ansible
+#
+# Ansible is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# Ansible is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with Ansible.  If not, see <http://www.gnu.org/licenses/>.
+
+# Make coding more python3-ish
+from __future__ import (absolute_import, division, print_function)
+__metaclass__ = type
+
+import os
+import json
+
+from ansible.compat.tests import unittest
+from ansible.compat.tests.mock import patch, MagicMock
+from ansible.errors import AnsibleModuleExit
+from ansible.modules.network.vyos import vyos_command
+from ansible.module_utils import basic
+from ansible.module_utils._text import to_bytes
+
+
+fixture_path = os.path.join(os.path.dirname(__file__), 'fixtures')
+fixture_data = {}
+
+
+def set_module_args(args):
+    args = json.dumps({'ANSIBLE_MODULE_ARGS': args})
+    basic._ANSIBLE_ARGS = to_bytes(args)
+
+
+def load_fixture(name):
+    path = os.path.join(fixture_path, name)
+
+    if path in fixture_data:
+        return fixture_data[path]
+
+    with open(path) as f:
+        data = f.read()
+
+    try:
+        data = json.loads(data)
+    except:
+        pass
+
+    fixture_data[path] = data
+    return data
+
+
+class TestVyosCommandModule(unittest.TestCase):
+
+    def setUp(self):
+        self.mock_run_commands = patch('ansible.modules.network.vyos.vyos_command.run_commands')
+        self.run_commands = self.mock_run_commands.start()
+
+    def tearDown(self):
+        self.mock_run_commands.stop()
+
+    def execute_module(self, failed=False, changed=False):
+
+        def load_from_file(*args, **kwargs):
+            module, commands = args
+            output = list()
+
+            for item in commands:
+                try:
+                    obj = json.loads(item)
+                    command = obj['command']
+                except ValueError:
+                    command = item
+                filename = str(command).replace(' ', '_')
+                output.append(load_fixture(filename))
+            return output
+
+        self.run_commands.side_effect = load_from_file
+
+        with self.assertRaises(AnsibleModuleExit) as exc:
+            vyos_command.main()
+
+        result = exc.exception.result
+
+        if failed:
+            self.assertTrue(result.get('failed'))
+        else:
+            self.assertEqual(result.get('changed'), changed, result)
+
+        return result
+
+    def test_vyos_command_simple(self):
+        set_module_args(dict(commands=['show version']))
+        result = self.execute_module()
+        self.assertEqual(len(result['stdout']), 1)
+        self.assertTrue(result['stdout'][0].startswith('Version:      VyOS'))
+
+    def test_vyos_command_multiple(self):
+        set_module_args(dict(commands=['show version', 'show version']))
+        result = self.execute_module()
+        self.assertEqual(len(result['stdout']), 2)
+        self.assertTrue(result['stdout'][0].startswith('Version:      VyOS'))
+
+    def test_vyos_command_wait_for(self):
+        wait_for = 'result[0] contains "VyOS maintainers"'
+        set_module_args(dict(commands=['show version'], wait_for=wait_for))
+        self.execute_module()
+
+    def test_vyos_command_wait_for_fails(self):
+        wait_for = 'result[0] contains "test string"'
+        set_module_args(dict(commands=['show version'], wait_for=wait_for))
+        self.execute_module(failed=True)
+        self.assertEqual(self.run_commands.call_count, 10)
+
+    def test_vyos_command_retries(self):
+        wait_for = 'result[0] contains "test string"'
+        set_module_args(dict(commands=['show version'], wait_for=wait_for, retries=2))
+        self.execute_module(failed=True)
+        self.assertEqual(self.run_commands.call_count, 2)
+
+    def test_vyos_command_match_any(self):
+        wait_for = ['result[0] contains "VyOS maintainers"',
+                    'result[0] contains "test string"']
+        set_module_args(dict(commands=['show version'], wait_for=wait_for, match='any'))
+        self.execute_module()
+
+    def test_vyos_command_match_all(self):
+        wait_for = ['result[0] contains "VyOS maintainers"',
+                    'result[0] contains "maintainers@vyos.net"']
+        set_module_args(dict(commands=['show version'], wait_for=wait_for, match='all'))
+        self.execute_module()
+
+    def test_vyos_command_match_all_failure(self):
+        wait_for = ['result[0] contains "VyOS maintainers"',
+                    'result[0] contains "test string"']
+        commands = ['show version', 'show version']
+        set_module_args(dict(commands=commands, wait_for=wait_for, match='all'))
+        self.execute_module(failed=True)