Validate EXAMPLES as YAML

lib/ansible/modules/cloud/amazon/_ec2_vpc.py

@@ -105,14 +105,14 @@ EXAMPLES = '''
 # It is assumed that their matching environment variables are set.
 
 # Basic creation example:
-      ec2_vpc:
+    - ec2_vpc:
         state: present
         cidr_block: 172.23.0.0/16
         resource_tags: { "Environment":"Development" }
         region: us-west-2
 # Full creation example with subnets and optional availability zones.
 # The absence or presence of subnets deletes or creates them respectively.
-      ec2_vpc:
+    - ec2_vpc:
         state: present
         cidr_block: 172.22.0.0/16
         resource_tags: { "Environment":"Development" }
@@ -143,12 +143,12 @@ EXAMPLES = '''
       register: vpc
 
 # Removal of a VPC by id
-      ec2_vpc:
+    - ec2_vpc:
         state: absent
         vpc_id: vpc-aaaaaaa
         region: us-west-2
-If you have added elements not managed by this module, e.g. instances, NATs, etc then
-the delete will fail until those dependencies are removed.
+# If you have added elements not managed by this module, e.g. instances, NATs, etc then
+# the delete will fail until those dependencies are removed.
 '''
 
 

lib/ansible/modules/cloud/amazon/cloudformation_facts.py

@@ -73,7 +73,7 @@ EXAMPLES = '''
 
 # Facts are published in ansible_facts['cloudformation'][<stack_name>]
 - debug:
-    msg: '{{ ansible_facts['cloudformation']['my-cloudformation-stack'] }}'
+    msg: "{{ ansible_facts['cloudformation']['my-cloudformation-stack'] }}"
 
 # Get all stack information about a stack
 - cloudformation_facts:

lib/ansible/modules/cloud/amazon/cloudfront_facts.py

@@ -145,10 +145,10 @@ EXAMPLES = '''
 
 # Facts are published in ansible_facts['cloudfront'][<distribution_name>]
 - debug:
-    msg: '{{ ansible_facts['cloudfront']['my-cloudfront-distribution-id'] }}'
+    msg: "{{ ansible_facts['cloudfront']['my-cloudfront-distribution-id'] }}"
 
 - debug:
-    msg: '{{ ansible_facts['cloudfront']['www.my-website.com'] }}'
+    msg: "{{ ansible_facts['cloudfront']['www.my-website.com'] }}"
 
 # Get all information about an invalidation for a distribution.
 - cloudfront_facts:

lib/ansible/modules/cloud/amazon/cloudtrail.py

@@ -83,7 +83,8 @@ extends_documentation_fragment: aws
 
 EXAMPLES = """
   - name: enable cloudtrail
-    local_action: cloudtrail
+    local_action:
+      module: cloudtrail
       state: enabled
       name: main
       s3_bucket_name: ourbucket
@@ -91,7 +92,8 @@ EXAMPLES = """
       region: us-east-1
 
   - name: enable cloudtrail with different configuration
-    local_action: cloudtrail
+    local_action:
+      module: cloudtrail
       state: enabled
       name: main
       s3_bucket_name: ourbucket2
@@ -99,7 +101,8 @@ EXAMPLES = """
       region: us-east-1
 
   - name: remove cloudtrail
-    local_action: cloudtrail
+    local_action:
+      module: cloudtrail
       state: disabled
       name: main
       region: us-east-1

lib/ansible/modules/cloud/amazon/ec2_asg.py

@@ -182,15 +182,15 @@ EXAMPLES = '''
 
 # Rolling ASG Updates
 
-Below is an example of how to assign a new launch config to an ASG and terminate old instances.
-
-All instances in "myasg" that do not have the launch configuration named "my_new_lc" will be terminated in
-a rolling fashion with instances using the current launch configuration, "my_new_lc".
-
-This could also be considered a rolling deploy of a pre-baked AMI.
-
-If this is a newly created group, the instances will not be replaced since all instances
-will have the current launch configuration.
+# Below is an example of how to assign a new launch config to an ASG and terminate old instances.
+#
+# All instances in "myasg" that do not have the launch configuration named "my_new_lc" will be terminated in
+# a rolling fashion with instances using the current launch configuration, "my_new_lc".
+#
+# This could also be considered a rolling deploy of a pre-baked AMI.
+#
+# If this is a newly created group, the instances will not be replaced since all instances
+# will have the current launch configuration.
 
 - name: create launch config
   ec2_lc:
@@ -213,8 +213,8 @@ will have the current launch configuration.
     desired_capacity: 5
     region: us-east-1
 
-To only replace a couple of instances instead of all of them, supply a list
-to "replace_instances":
+# To only replace a couple of instances instead of all of them, supply a list
+# to "replace_instances":
 
 - ec2_asg:
     name: myasg

lib/ansible/modules/cloud/amazon/ec2_eni.py

@@ -175,7 +175,7 @@ EXAMPLES = '''
 
 # Modify the interface to enable the delete_on_terminaton flag
 - ec2_eni:
-    eni_id: {{ "eni.interface.id" }}
+    eni_id: "{{ eni.interface.id }}"
     delete_on_termination: true
 
 '''

lib/ansible/modules/cloud/amazon/ecs_taskdefinition.py

@@ -90,7 +90,7 @@ EXAMPLES = '''
         hostPort: 80
     - name: busybox
       command:
-        - "/bin/sh -c \"while true; do echo '<html> <head> <title>Amazon ECS Sample App</title> <style>body {margin-top: 40px; background-color: #333;} </style> </head><body> <div style=color:white;text-align:center> <h1>Amazon ECS Sample App</h1> <h2>Congratulations!</h2> <p>Your application is now running on a container in Amazon ECS.</p>' > top; /bin/date > date ; echo '</div></body></html>' > bottom; cat top date bottom > /usr/local/apache2/htdocs/index.html ; sleep 1; done\""
+        - /bin/sh -c "while true; do echo '<html><head><title>Amazon ECS Sample App</title></head><body><div><h1>Amazon ECS Sample App</h1><h2>Congratulations!</h2><p>Your application is now running on a container in Amazon ECS.</p>' > top; /bin/date > date ; echo '</div></body></html>' > bottom; cat top date bottom > /usr/local/apache2/htdocs/index.html ; sleep 1; done"
       cpu: 10
       entryPoint:
       - sh

lib/ansible/modules/cloud/amazon/elasticache_subnet_group.py

@@ -54,7 +54,7 @@ extends_documentation_fragment:
 
 EXAMPLES = '''
 # Add or change a subnet group
-- elasticache_subnet_group
+- elasticache_subnet_group:
     state: present
     name: norwegian-blue
     description: My Fancy Ex Parrot Subnet Group

lib/ansible/modules/cloud/amazon/rds.py

@@ -276,7 +276,7 @@ EXAMPLES = '''
     wait: yes
 
 # Reboot an instance and wait for it to become available again
-- rds
+- rds:
     command: reboot
     instance_name: database
     wait: yes

lib/ansible/modules/cloud/amazon/redshift_subnet_group.py

@@ -67,7 +67,7 @@ EXAMPLES = '''
         - 'subnet-bbbbb'
 
 # Remove subnet group
-redshift_subnet_group: >
+- redshift_subnet_group:
     state: absent
     group_name: redshift-subnet
 '''

lib/ansible/modules/cloud/azure/azure_rm_deployment.py

@@ -163,7 +163,7 @@ EXAMPLES = '''
 
     - name: Add new instance to host group
       add_host:
-        hostname: '{{ item['ips'][0].public_ip }}'
+        hostname: "{{ item['ips'][0].public_ip }}"
         groupname: azure_vms
       with_items: "{{ azure.deployment.instances }}"
 

lib/ansible/modules/cloud/azure/azure_rm_networkinterface.py

@@ -151,14 +151,14 @@ author:
 
 EXAMPLES = '''
     - name: Create a network interface with minimal parameters
-        azure_rm_networkinterface:
+      azure_rm_networkinterface:
             name: nic001
             resource_group: Testing
             virtual_network_name: vnet001
             subnet_name: subnet001
 
-     - name: Create a network interface with private IP address only (no Public IP)
-        azure_rm_networkinterface:
+    - name: Create a network interface with private IP address only (no Public IP)
+      azure_rm_networkinterface:
             name: nic001
             resource_group: Testing
             virtual_network_name: vnet001
@@ -166,7 +166,7 @@ EXAMPLES = '''
             public_ip: no
 
     - name: Create a network interface for use in a Windows host (opens RDP port) with custom RDP port
-        azure_rm_networkinterface:
+      azure_rm_networkinterface:
             name: nic002
             resource_group: Testing
             virtual_network_name: vnet001
@@ -175,7 +175,7 @@ EXAMPLES = '''
             rdp_port: 3399
 
     - name: Create a network interface using existing security group and public IP
-        azure_rm_networkinterface:
+      azure_rm_networkinterface:
             name: nic003
             resource_group: Testing
             virtual_network_name: vnet001
@@ -184,7 +184,7 @@ EXAMPLES = '''
             public_ip_address_name: publicip001
 
     - name: Delete network interface
-        azure_rm_networkinterface:
+      azure_rm_networkinterface:
             resource_group: Testing
             name: nic003
             state: absent

lib/ansible/modules/cloud/centurylink/clc_blueprint_package.py

@@ -76,7 +76,7 @@ EXAMPLES = '''
 # Note - You must set the CLC_V2_API_USERNAME And CLC_V2_API_PASSWD Environment variables before running these examples
 
 - name: Deploy package
-      clc_blueprint_package:
+  clc_blueprint_package:
         server_ids:
             - UC1TEST-SERVER1
             - UC1TEST-SERVER2

lib/ansible/modules/cloud/cloudstack/cs_configuration.py

@@ -91,7 +91,7 @@ EXAMPLES = '''
 
 # Ensure account configuration
 - local_action:
-    module: cs_configuration:
+    module: cs_configuration
     name: allow.public.user.templates
     value: false
     account: acme inc

lib/ansible/modules/cloud/cloudstack/cs_sshkeypair.py

@@ -84,7 +84,7 @@ EXAMPLES = '''
 # register your existing local public key:
 - cs_sshkeypair:
     name: linus@example.com
-    public_key: '{{ lookup('file', '~/.ssh/id_rsa.pub') }}'
+    public_key: "{{ lookup('file', '~/.ssh/id_rsa.pub') }}"
   delegate_to: localhost
 '''
 

lib/ansible/modules/cloud/docker/docker_image.py

@@ -231,7 +231,7 @@ EXAMPLES = '''
     load_path: my_sinatra.tar
 
 - name: Build image and with buildargs
-   docker_image:
+  docker_image:
      path: /path/to/build/dir
      name: myimage
      buildargs:

lib/ansible/modules/cloud/google/gce.py

@@ -236,6 +236,7 @@ EXAMPLES = '''
       credentials_file: "/path/to/your-key.json"
       project_id: "your-project-name"
 
+---
 # Example Playbook
 - name: Compute Engine Instance Examples
   hosts: localhost

lib/ansible/modules/cloud/google/gcpubsub.py

@@ -91,10 +91,10 @@ gcpubsub:
         mykey2: myvalu2
         mykey3: myvalue3
     - message: "this is message 2"
-        attributes:
-          server: prod
-          sla: "99.9999"
-          owner: fred
+      attributes:
+        server: prod
+        sla: "99.9999"
+        owner: fred
 
 # Subscriptions
 ## Create Subscription (pull)

lib/ansible/modules/cloud/misc/proxmox.py

@@ -286,7 +286,7 @@ EXAMPLES = '''
 - proxmox:
     vmid: 100
     api_user: root@pam
-    api_passwordL 1q2w3e
+    api_password: 1q2w3e
     api_host: node1
     force: yes
     state: stopped

lib/ansible/modules/cloud/misc/rhevm.py

@@ -217,8 +217,7 @@ vm:
 
 EXAMPLES = '''
 # basic get info from VM
-  action: rhevm
-  args:
+  - rhevm:
       name: "demo"
       user: "{{ rhev.admin.name }}"
       password: "{{ rhev.admin.pass }}"
@@ -226,8 +225,7 @@ EXAMPLES = '''
       state: "info"
 
 # basic create example from image
-  action: rhevm
-  args:
+  - rhevm:
       name: "demo"
       user: "{{ rhev.admin.name }}"
       password: "{{ rhev.admin.pass }}"
@@ -237,8 +235,7 @@ EXAMPLES = '''
       cluster: "centos"
 
 # power management
-  action: rhevm
-  args:
+  - rhevm:
       name: "uptime_server"
       user: "{{ rhev.admin.name }}"
       password: "{{ rhev.admin.pass }}"
@@ -246,11 +243,10 @@ EXAMPLES = '''
       cluster: "RH"
       state: "down"
       image: "centos7_x64"
-      cluster: "centos
+      cluster: "centos"
 
 # multi disk, multi nic create example
-  action: rhevm
-  args:
+  - rhevm:
       name: "server007"
       user: "{{ rhev.admin.name }}"
       password: "{{ rhev.admin.pass }}"
@@ -290,23 +286,21 @@ EXAMPLES = '''
         - "hd"
 
 # add a CD to the disk cd_drive
-  action: rhevm
-  args:
-    name: 'server007'
-    user: "{{ rhev.admin.name }}"
-    password: "{{ rhev.admin.pass }}"
-    state: 'cd'
-    cd_drive: 'rhev-tools-setup.iso'
+  - rhevm:
+      name: 'server007'
+      user: "{{ rhev.admin.name }}"
+      password: "{{ rhev.admin.pass }}"
+      state: 'cd'
+      cd_drive: 'rhev-tools-setup.iso'
 
 # new host deployment + host network configuration
-  action: rhevm
-  args:
-    name: "ovirt_node007"
-    password: "{{ rhevm.admin.pass }}"
-    type: "host"
-    state: present
-    cluster: "rhevm01"
-    ifaces:
+  - rhevm:
+      name: "ovirt_node007"
+      password: "{{ rhevm.admin.pass }}"
+      type: "host"
+      state: present
+      cluster: "rhevm01"
+      ifaces:
         - name: em1
         - name: em2
         - name: p3p1

lib/ansible/modules/cloud/misc/virt.py

@@ -75,17 +75,18 @@ EXAMPLES = '''
     state: running
 
 # /usr/bin/ansible invocations
-ansible host -m virt -a "name=alpha command=status"
-ansible host -m virt -a "name=alpha command=get_xml"
-ansible host -m virt -a "name=alpha command=create uri=lxc:///"
+# ansible host -m virt -a "name=alpha command=status"
+# ansible host -m virt -a "name=alpha command=get_xml"
+# ansible host -m virt -a "name=alpha command=create uri=lxc:///"
 
+---
 # a playbook example of defining and launching an LXC guest
 tasks:
   - name: define vm
     virt:
         name: foo
         command: define
-        xml: '{{ lookup('template', 'container-template.xml.j2') }}'
+        xml: "{{ lookup('template', 'container-template.xml.j2') }}"
         uri: 'lxc:///'
   - name: start vm
     virt:

lib/ansible/modules/cloud/misc/xenserver_facts.py

@@ -34,10 +34,11 @@ options: {}
 
 EXAMPLES = '''
 - name: Gather facts from xenserver
-   xenserver:
+  xenserver:
 
 - name: Print running VMs
-  debug: msg="{{ item }}"
+  debug:
+    msg: "{{ item }}"
   with_items: "{{ xs_vms.keys() }}"
   when: xs_vms[item]['power_state'] == "Running"
 

lib/ansible/modules/cloud/openstack/os_keystone_domain_facts.py

@@ -58,7 +58,7 @@ EXAMPLES = '''
     var: openstack_domains
 
 # Gather facts about a previously created domain with filter
-- os_keystone_domain_facts
+- os_keystone_domain_facts:
     cloud: awesomecloud
     name: demodomain
     filters:

lib/ansible/modules/cloud/openstack/os_project_facts.py

@@ -63,16 +63,15 @@ EXAMPLES = '''
     var: openstack_projects
 
 # Gather facts about a previously created project in a specific domain
-- os_project_facts
+- os_project_facts:
     cloud: awesomecloud
     name: demoproject
     domain: admindomain
 - debug:
     var: openstack_projects
 
-# Gather facts about a previously created project in a specific domain
-  with filter
-- os_project_facts
+# Gather facts about a previously created project in a specific domain with filter
+- os_project_facts:
     cloud: awesomecloud
     name: demoproject
     domain: admindomain

lib/ansible/modules/cloud/openstack/os_server.py

@@ -298,12 +298,12 @@ EXAMPLES = '''
            username: admin
            password: admin
            project_name: admin
-         name: vm1
-         image: 4f905f38-e52a-43d2-b6ec-754a13ffb529
-         key_name: ansible_key
-         timeout: 200
-         flavor: 4
-         nics: "net-id=4cb08b20-62fe-11e5-9d70-feff819cdc9f,net-id=542f0430-62fe-11e5-9d70-feff819cdc9f..."
+        name: vm1
+        image: 4f905f38-e52a-43d2-b6ec-754a13ffb529
+        key_name: ansible_key
+        timeout: 200
+        flavor: 4
+        nics: "net-id=4cb08b20-62fe-11e5-9d70-feff819cdc9f,net-id=542f0430-62fe-11e5-9d70-feff819cdc9f..."
 
 - name: Creates a new instance and attaches to a network and passes metadata to the instance
   os_server:
@@ -336,7 +336,7 @@ EXAMPLES = '''
     key_name: ansible_key
     timeout: 200
     flavor: 4
-      network: another_network
+    network: another_network
 
 # Create a new instance with 4G of RAM on a 75G Ubuntu Trusty volume
 - name: launch a compute instance

lib/ansible/modules/cloud/openstack/os_stack.py

@@ -86,12 +86,12 @@ EXAMPLES = '''
         bmc_flavor: m1.medium
         bmc_image: CentOS
         key_name: default
-        private_net: {{ private_net_param }}
+        private_net: "{{ private_net_param }}"
         node_count: 2
         name: undercloud
         image: CentOS
         my_flavor: m1.large
-        external_net: {{ external_net_param }}
+        external_net: "{{ external_net_param }}"
 '''
 
 RETURN = '''

lib/ansible/modules/cloud/openstack/os_user_facts.py

@@ -63,16 +63,15 @@ EXAMPLES = '''
     var: openstack_users
 
 # Gather facts about a previously created user in a specific domain
-- os_user_facts
+- os_user_facts:
     cloud: awesomecloud
     name: demouser
     domain: admindomain
 - debug:
     var: openstack_users
 
-# Gather facts about a previously created user in a specific domain
-  with filter
-- os_user_facts
+# Gather facts about a previously created user in a specific domain with filter
+- os_user_facts:
     cloud: awesomecloud
     name: demouser
     domain: admindomain

lib/ansible/modules/cloud/ovirt/ovirt_auth.py

@@ -102,7 +102,7 @@ tasks:
        # oVirt user's password, and include that yaml file with variable:
        - include_vars: ovirt_password.yml
 
-       - name: Obtain SSO token with using username/password credentials:
+       - name: Obtain SSO token with using username/password credentials
          ovirt_auth:
            url: https://ovirt.example.com/ovirt-engine/api
            username: admin@internal
@@ -116,11 +116,11 @@ tasks:
            state: absent
            name: myvm
 
-      always:
-        - name: Always revoke the SSO token
-          ovirt_auth:
-            state: absent
-            ovirt_auth: "{{ ovirt_auth }}"
+    always:
+      - name: Always revoke the SSO token
+        ovirt_auth:
+          state: absent
+          ovirt_auth: "{{ ovirt_auth }}"
 '''
 
 RETURN = '''

lib/ansible/modules/cloud/ovirt/ovirt_snapshots.py

@@ -73,14 +73,14 @@ EXAMPLES = '''
 - ovirt_snapshots:
     vm_name: rhel7
     description: MySnapshot
-register: snapshot
+  register: snapshot
 
 # Create snapshot and save memory:
 - ovirt_snapshots:
     vm_name: rhel7
     description: SnapWithMem
     use_memory: true
-register: snapshot
+  register: snapshot
 
 # Restore snapshot:
 - ovirt_snapshots:

lib/ansible/modules/cloud/vmware/vca_vapp.py

@@ -137,12 +137,12 @@ EXAMPLES = '''
 - name: Creates a new vApp in a VCA instance
   vca_vapp:
     vapp_name: tower
-    state=present
-    template_name='Ubuntu Server 12.04 LTS (amd64 20150127)'
-    vdc_name=VDC1
-    instance_id=<your instance id here>
-    username=<your username here>
-    password=<your password here>
+    state: present
+    template_name: 'Ubuntu Server 12.04 LTS (amd64 20150127)'
+    vdc_name: VDC1
+    instance_id: '<your instance id here>'
+    username: '<your username here>'
+    password: '<your password here>'
 
 '''
 

lib/ansible/modules/cloud/vmware/vmware_cluster.py

@@ -64,14 +64,16 @@ extends_documentation_fragment: vmware.documentation
 EXAMPLES = '''
 # Example vmware_cluster command from Ansible Playbooks
 - name: Create Cluster
-      local_action: >
-        vmware_cluster
-        hostname="{{ ansible_ssh_host }}" username=root password=vmware
-        datacenter_name="datacenter"
-        cluster_name="cluster"
-        enable_ha=True
-        enable_drs=True
-        enable_vsan=True
+  local_action:
+    module: vmware_cluster
+    hostname: "{{ ansible_ssh_host }}"
+    username: root
+    password: vmware
+    datacenter_name: "datacenter"
+    cluster_name: "cluster"
+    enable_ha: True
+    enable_drs: True
+    enable_vsan: True
 '''
 
 try:

lib/ansible/modules/cloud/vmware/vmware_datacenter.py

@@ -65,10 +65,13 @@ extends_documentation_fragment: vmware.documentation
 EXAMPLES = '''
 # Example vmware_datacenter command from Ansible Playbooks
 - name: Create Datacenter
-      local_action: >
-        vmware_datacenter
-        hostname="{{ ansible_ssh_host }}" username=root password=vmware
-        datacenter_name="datacenter" state=present
+  local_action:
+    module: vmware_datacenter
+    hostname: "{{ ansible_ssh_host }}"
+    username: root
+    password: vmware
+    datacenter_name: "datacenter"
+    state: present
 '''
 
 try:

lib/ansible/modules/cloud/vmware/vmware_dvs_portgroup.py

@@ -65,7 +65,7 @@ extends_documentation_fragment: vmware.documentation
 
 EXAMPLES = '''
    - name: Create Management portgroup
-      local_action:
+     local_action:
         module: vmware_dvs_portgroup
         hostname: vcenter_ip_or_hostname
         username: vcenter_username

lib/ansible/modules/cloud/vmware/vmware_host.py

@@ -68,7 +68,7 @@ extends_documentation_fragment: vmware.documentation
 '''
 
 EXAMPLES = '''
-Example from Ansible playbook
+# Example from Ansible playbook
 
     - name: Add ESXi Host to VCSA
       local_action:

lib/ansible/modules/cloud/vmware/vmware_migrate_vmk.py

@@ -64,7 +64,7 @@ extends_documentation_fragment: vmware.documentation
 '''
 
 EXAMPLES = '''
-Example from Ansible playbook
+# Example from Ansible playbook
 
     - name: Migrate Management vmk
       local_action:

lib/ansible/modules/cloud/vmware/vmware_portgroup.py

@@ -60,7 +60,7 @@ extends_documentation_fragment: vmware.documentation
 '''
 
 EXAMPLES = '''
-Example from Ansible playbook
+# Example from Ansible playbook
 
     - name: Add Management Network VM Portgroup
       local_action:

lib/ansible/modules/cloud/vmware/vmware_target_canonical_facts.py

@@ -45,10 +45,12 @@ extends_documentation_fragment: vmware.documentation
 EXAMPLES = '''
 # Example vmware_target_canonical_facts command from Ansible Playbooks
 - name: Get Canonical name
-      local_action: >
-        vmware_target_canonical_facts
-        hostname="{{ ansible_ssh_host }}" username=root password=vmware
-        target_id=7
+  local_action:
+    module: vmware_target_canonical_facts
+    hostname: "{{ ansible_ssh_host }}"
+    username: root
+    password: vmware
+    target_id: 7
 '''
 
 try:

lib/ansible/modules/cloud/vmware/vmware_vmotion.py

@@ -51,7 +51,7 @@ extends_documentation_fragment: vmware.documentation
 '''
 
 EXAMPLES = '''
-Example from Ansible playbook
+# Example from Ansible playbook
 
     - name: Perform vMotion of VM
       local_action:

lib/ansible/modules/cloud/vmware/vmware_vswitch.py

@@ -65,7 +65,7 @@ extends_documentation_fragment: vmware.documentation
 '''
 
 EXAMPLES = '''
-Example from Ansible playbook
+# Example from Ansible playbook
 
     - name: Add a VMware vSwitch
       local_action:

lib/ansible/modules/cloud/vmware/vsphere_guest.py

@@ -153,6 +153,7 @@ requirements:
 
 
 EXAMPLES = '''
+---
 # Create a new VM on an ESX server
 # Returns changed = False when the VM already exists
 # Returns changed = True and a adds ansible_facts from the new VM
@@ -258,7 +259,7 @@ EXAMPLES = '''
     guest: newvm001
     vmware_guest_facts: yes
 
-
+---
 # Typical output of a vsphere_facts run on a guest
 # If vmware tools is not installed, ipadresses with return None
 
@@ -277,22 +278,22 @@ EXAMPLES = '''
   hw_processor_count: 2
   hw_product_uuid: "ef50bac8-2845-40ff-81d9-675315501dac"
 
-hw_power_status will be one of the following values:
-  - POWERED ON
-  - POWERED OFF
-  - SUSPENDED
-  - POWERING ON
-  - POWERING OFF
-  - SUSPENDING
-  - RESETTING
-  - BLOCKED ON MSG
-  - REVERTING TO SNAPSHOT
-  - UNKNOWN
-as seen in the VMPowerState-Class of PySphere: http://git.io/vlwOq
+# hw_power_status will be one of the following values:
+#   - POWERED ON
+#   - POWERED OFF
+#   - SUSPENDED
+#   - POWERING ON
+#   - POWERING OFF
+#   - SUSPENDING
+#   - RESETTING
+#   - BLOCKED ON MSG
+#   - REVERTING TO SNAPSHOT
+#   - UNKNOWN
+# as seen in the VMPowerState-Class of PySphere: http://git.io/vlwOq
 
+---
 # Remove a vm from vSphere
 # The VM must be powered_off or you need to use force to force a shutdown
-
 - vsphere_guest:
     vcenter_hostname: vcenter.mydomain.local
     username: myuser

lib/ansible/modules/commands/raw.py

@@ -76,5 +76,5 @@ EXAMPLES = '''
     executable: /bin/bash
 
 - name: safely use templated variables. Always use quote filter to avoid injection issues.
-  raw: {{package_mgr|quote}} {{pkg_flags|quote}} install {{python_simplejson|quote}}
+  raw: "{{package_mgr|quote}} {{pkg_flags|quote}} install {{python_simplejson|quote}}"
 '''

lib/ansible/modules/database/influxdb/influxdb_database.py

@@ -67,19 +67,19 @@ options:
 EXAMPLES = '''
 # Example influxdb_database command from Ansible Playbooks
 - name: Create database
-    influxdb_database:
+  influxdb_database:
       hostname: "{{influxdb_ip_address}}"
       database_name: "{{influxdb_database_name}}"
       state: present
 
 - name: Destroy database
-    influxdb_database:
+  influxdb_database:
       hostname: "{{influxdb_ip_address}}"
       database_name: "{{influxdb_database_name}}"
       state: absent
 
 - name: Create database using custom credentials
-    influxdb_database:
+  influxdb_database:
       hostname: "{{influxdb_ip_address}}"
       username: "{{influxdb_username}}"
       password: "{{influxdb_password}}"

lib/ansible/modules/database/influxdb/influxdb_retention_policy.py

@@ -77,7 +77,7 @@ options:
 EXAMPLES = '''
 # Example influxdb_retention_policy command from Ansible Playbooks
 - name: create 1 hour retention policy
-    influxdb_retention_policy:
+  influxdb_retention_policy:
       hostname: "{{influxdb_ip_address}}"
       database_name: "{{influxdb_database_name}}"
       policy_name: test
@@ -85,7 +85,7 @@ EXAMPLES = '''
       replication: 1
 
 - name: create 1 day retention policy
-    influxdb_retention_policy:
+  influxdb_retention_policy:
       hostname: "{{influxdb_ip_address}}"
       database_name: "{{influxdb_database_name}}"
       policy_name: test
@@ -93,7 +93,7 @@ EXAMPLES = '''
       replication: 1
 
 - name: create 1 week retention policy
-    influxdb_retention_policy:
+  influxdb_retention_policy:
       hostname: "{{influxdb_ip_address}}"
       database_name: "{{influxdb_database_name}}"
       policy_name: test
@@ -101,7 +101,7 @@ EXAMPLES = '''
       replication: 1
 
 - name: create infinite retention policy
-    influxdb_retention_policy:
+  influxdb_retention_policy:
       hostname: "{{influxdb_ip_address}}"
       database_name: "{{influxdb_database_name}}"
       policy_name: test

lib/ansible/modules/database/mysql/mysql_user.py

@@ -183,7 +183,7 @@ EXAMPLES = """
     state: present
 
 # Example privileges string format
-mydb.*:INSERT,UPDATE/anotherdb.*:SELECT/yetanotherdb.*:ALL
+# mydb.*:INSERT,UPDATE/anotherdb.*:SELECT/yetanotherdb.*:ALL
 
 # Example using login_unix_socket to connect to server
 - mysql_user:
@@ -200,10 +200,9 @@ mydb.*:INSERT,UPDATE/anotherdb.*:SELECT/yetanotherdb.*:ALL
     sql_log_bin: no
 
 # Example .my.cnf file for setting the root password
-
-[client]
-user=root
-password=n<_665{vS43y
+# [client]
+# user=root
+# password=n<_665{vS43y
 """
 
 import getpass

lib/ansible/modules/database/postgresql/postgresql_user.py

@@ -189,7 +189,7 @@ EXAMPLES = '''
     state: absent
 
 # Example privileges string format
-INSERT,UPDATE/table:SELECT/anothertable:ALL
+# INSERT,UPDATE/table:SELECT/anothertable:ALL
 
 # Remove an existing user's password
 - postgresql_user:

lib/ansible/modules/files/synchronize.py

@@ -244,7 +244,7 @@ EXAMPLES = '''
     links: yes
 
 # Synchronization of two paths both on the control machine
-- synchronize
+- synchronize:
     src: some/relative/path
     dest: /some/absolute/path
   delegate_to: localhost
@@ -282,9 +282,9 @@ EXAMPLES = '''
     rsync_path: "su -c rsync"
 
 # Example .rsync-filter file in the source directory
-- var       # exclude any path whose last part is 'var'
-- /var      # exclude any path starting with 'var' starting at the source directory
-+ /var/conf # include /var/conf even though it was previously excluded
+# - var       # exclude any path whose last part is 'var'
+# - /var      # exclude any path starting with 'var' starting at the source directory
+# + /var/conf # include /var/conf even though it was previously excluded
 
 # Synchronize passing in extra rsync options
 - synchronize:

lib/ansible/modules/monitoring/bigpanda.py

@@ -88,7 +88,7 @@ EXAMPLES = '''
     version: '1.3'
     token: '{{ bigpanda_token }}'
     state: started
-...
+
 - bigpanda:
     component: myapp
     version: '1.3'
@@ -104,7 +104,7 @@ EXAMPLES = '''
     state: started
   delegate_to: localhost
   register: deployment
-...
+
 - bigpanda:
     component: '{{ deployment.component }}'
     version: '{{ deployment.version }}'

lib/ansible/modules/monitoring/datadog_monitor.py

@@ -122,7 +122,7 @@ datadog_monitor:
   type: "metric alert"
   name: "Test monitor"
   state: "present"
-  query: "datadog.agent.up".over("host:host1").last(2).count_by_status()"
+  query: "datadog.agent.up.over('host:host1').last(2).count_by_status()"
   message: "Host [[host.name]] with IP [[host.ip]] is failing to report to datadog."
   api_key: "9775a026f1ca7d1c6c5af9d94d9595a4"
   app_key: "87ce4a24b5553d2e482ea8a8500e71b8ad4554ff"

lib/ansible/modules/monitoring/logicmonitor.py

@@ -230,7 +230,7 @@ EXAMPLES = '''
   tasks:
   - name: Create a host group
     # All tasks except for target=collector should use delegate_to: localhost
-    logicmonitor
+    logicmonitor:
       target: hostgroup
       action: add
       fullpath: /servers/development

lib/ansible/modules/network/asa/asa_acl.py

@@ -102,6 +102,7 @@ options:
 EXAMPLES = """
 # Note: examples below use the following provider dict to handle
 #       transport and authentication to the node.
+---
 vars:
   cli:
     host: "{{ inventory_hostname }}"
@@ -111,6 +112,7 @@ vars:
     authorize: yes
     auth_pass: cisco
 
+---
 - asa_acl:
     lines:
       - access-list ACL-ANSIBLE extended permit tcp any any eq 82
@@ -127,7 +129,7 @@ vars:
     lines:
       - access-list ACL-OUTSIDE extended permit tcp any any eq www
       - access-list ACL-OUTSIDE extended permit tcp any any eq https
-     context: customer_a
+    context: customer_a
     provider: "{{ cli }}"
 """
 

lib/ansible/modules/network/asa/asa_command.py

@@ -84,6 +84,7 @@ options:
 EXAMPLES = """
 # Note: examples below use the following provider dict to handle
 #       transport and authentication to the node.
+---
 vars:
   cli:
     host: "{{ inventory_hostname }}"
@@ -93,7 +94,7 @@ vars:
     auth_pass: cisco
     transport: cli
 
-
+---
 - asa_command:
     commands:
       - show version

lib/ansible/modules/network/asa/asa_config.py

@@ -172,6 +172,7 @@ options:
 EXAMPLES = """
 # Note: examples below use the following provider dict to handle
 #       transport and authentication to the node.
+---
 vars:
   cli:
     host: "{{ inventory_hostname }}"
@@ -181,6 +182,7 @@ vars:
     auth_pass: cisco
     transport: cli
 
+---
 - asa_config:
     lines:
       - network-object host 10.80.30.18

lib/ansible/modules/network/bigswitch/bigmon_chain.py

@@ -2,7 +2,7 @@
 # -*- coding: utf-8 -*-
 
 # Ansible module to manage Big Monitoring Fabric service chains
-# (c) 2016, Ted Elhourani <ted@bigswitch.com>
+# (c) 2016, Ted Elhourani <ted@bigswitch.com>,
 #
 # This file is part of Ansible
 #
@@ -59,11 +59,11 @@ options:
 
 EXAMPLES = '''
 - name: bigmon inline service chain
-      bigmon_chain:
-        name: MyChain
-        controller: '{{ inventory_hostname }}'
-        state: present
-        validate_certs: false
+  bigmon_chain:
+    name: MyChain
+    controller: '{{ inventory_hostname }}'
+    state: present
+    validate_certs: false
 '''
 
 

lib/ansible/modules/network/bigswitch/bigmon_policy.py

@@ -84,13 +84,13 @@ options:
 
 EXAMPLES = '''
 - name: policy to aggregate filter and deliver data center (DC) 1 traffic
-      bigmon_policy:
-        name: policy1
-        policy_description: DC 1 traffic policy
-        action: drop
-        controller: '{{ inventory_hostname }}'
-        state: present
-        validate_certs: false
+  bigmon_policy:
+    name: policy1
+    policy_description: DC 1 traffic policy
+    action: drop
+    controller: '{{ inventory_hostname }}'
+    state: present
+    validate_certs: false
 '''
 
 RETURN = '''

lib/ansible/modules/network/cloudengine/ce_command.py

@@ -84,6 +84,7 @@ options:
 EXAMPLES = """
 # Note: examples below use the following provider dict to handle
 #       transport and authentication to the node.
+---
 vars:
   cli:
     host: "{{ inventory_hostname }}"
@@ -91,6 +92,7 @@ vars:
     password: admin
     transport: cli
 
+---
 - name: run display version on remote devices
   ce_command:
     commands: display version

lib/ansible/modules/network/cumulus/cl_bond.py

@@ -186,6 +186,7 @@ EXAMPLES = '''
 
 # In vars file
 # ============
+---
 cl_bonds:
   bond0:
     alias_name: uplink to isp

lib/ansible/modules/network/cumulus/cl_bridge.py

@@ -140,6 +140,7 @@ EXAMPLES = '''
 
 # In vars file
 # ============
+---
 cl_bridge:
   br0:
     alias_name: 'vlan aware bridge'

lib/ansible/modules/network/cumulus/cl_interface.py

@@ -146,8 +146,8 @@ EXAMPLES = '''
 # define cl_interfaces once in tasks
 # then write interfaces in variables file
 # with just the options you want.
-  - name: Create interfaces
-    cl_interface:
+- name: Create interfaces
+  cl_interface:
       name: '{{ item.key }}'
       ipv4: '{{ item.value.ipv4 | default(omit) }}'
       ipv6: '{{ item.value.ipv6 | default(omit) }}'
@@ -165,11 +165,12 @@ EXAMPLES = '''
       mstpctl_portnetwork: "{{ item.value.mstpctl_portnetwork | default('no') }}"
       mstpctl_portadminedge: "{{ item.value.mstpctl_portadminedge | default('no') }}"
       mstpctl_bpduguard: "{{ item.value.mstpctl_bpduguard | default('no') }}"
-    with_dict: '{{ cl_interfaces }}'
-    notify: reload networking
+  with_dict: '{{ cl_interfaces }}'
+  notify: reload networking
 
 # In vars file
 # ============
+---
 cl_interfaces:
   swp1:
     alias_name: uplink to isp

lib/ansible/modules/network/cumulus/cl_interface_policy.py

@@ -49,7 +49,7 @@ options:
 '''
 
 EXAMPLES = '''
-Example playbook entries using the cl_interface_policy module.
+# Example playbook entries using the cl_interface_policy module.
 
     - name: shows types of interface ranges supported
       cl_interface_policy:

lib/ansible/modules/network/cumulus/cl_license.py

@@ -78,7 +78,7 @@ EXAMPLES = '''
         dest: /etc/network/interfaces
       notify: restart networking
 
- handlers:
+  handlers:
    - name: restart switchd
      service:
       name: switchd
@@ -89,10 +89,7 @@ EXAMPLES = '''
       state: reloaded
 
 # Force all switches to accept a new license. Typically not needed
-ansible -m cl_license -a "src='http://10.1.1.1/new_lic' force=yes" -u root all
-
-----
-
+# ansible -m cl_license -a "src='http://10.1.1.1/new_lic' force=yes" -u root all
 '''
 
 RETURN = '''

lib/ansible/modules/network/dellos10/dellos10_command.py

@@ -97,7 +97,7 @@ tasks:
       provider: "{{ cli }}"
 
   - name: run multiple commands on remote nodes
-     dellos10_command:
+    dellos10_command:
       commands:
         - show version
         - show interface

lib/ansible/modules/network/dellos6/dellos6_command.py

@@ -87,20 +87,20 @@ tasks:
  - name: run show version on remote devices
    dellos6_command:
      commands: show version
-     provider "{{ cli }}"
+     provider: "{{ cli }}"
 
  - name: run show version and check to see if output contains Dell
    dellos6_command:
      commands: show version
      wait_for: result[0] contains Dell
-     provider "{{ cli }}"
+     provider: "{{ cli }}"
 
  - name: run multiple commands on remote nodes
    dellos6_command:
      commands:
       - show version
       - show interfaces
-     provider "{{ cli }}"
+     provider: "{{ cli }}"
 
  - name: run multiple commands and evaluate the output
    dellos6_command:
@@ -110,7 +110,7 @@ tasks:
      wait_for:
       - result[0] contains Dell
       - result[1] contains Access
-     provider "{{ cli }}"
+     provider: "{{ cli }}"
 """
 
 RETURN = """

lib/ansible/modules/network/dnsimple.py

@@ -136,7 +136,7 @@ EXAMPLES = '''
   delegate_to: localhost
 
 # create a my.com CNAME record to example.com
-- dnsimple
+- dnsimple:
     domain: my.com
     record: ''
     type: CNAME

lib/ansible/modules/network/eos/eos_command.py

@@ -94,7 +94,7 @@ EXAMPLES = """
     wait_for: result[0] contains Arista
 
 - name: run multiple commands on remote nodes
-   eos_command:
+  eos_command:
     commands:
       - show version
       - show interfaces

lib/ansible/modules/network/eos/eos_system.py

@@ -104,7 +104,7 @@ EXAMPLES = """
     lookup_source: Management1
 
 - name: configure DNS lookup sources with VRF support
-    eos_system:
+  eos_system:
       lookup_source:
         - interface: Management1
           vrf: mgmt

lib/ansible/modules/network/f5/bigip_pool.py

@@ -199,7 +199,7 @@ EXAMPLES = '''
       state: "present"
       name: "my-pool"
       partition: "Common"
-      host: "{{ ansible_default_ipv4["address"] }}"
+      host: "{{ ansible_default_ipv4['address'] }}"
       port: 80
 
 - name: Remove pool member from pool
@@ -210,7 +210,7 @@ EXAMPLES = '''
       state: "absent"
       name: "my-pool"
       partition: "Common"
-      host: "{{ ansible_default_ipv4["address"] }}"
+      host: "{{ ansible_default_ipv4['address'] }}"
       port: 80
 
 - name: Delete pool

lib/ansible/modules/network/f5/bigip_pool_member.py

@@ -132,7 +132,7 @@ EXAMPLES = '''
       state: "present"
       pool: "my-pool"
       partition: "Common"
-      host: "{{ ansible_default_ipv4["address"] }}"
+      host: "{{ ansible_default_ipv4['address'] }}"
       port: 80
       description: "web server"
       connection_limit: 100
@@ -148,7 +148,7 @@ EXAMPLES = '''
       state: "present"
       pool: "my-pool"
       partition: "Common"
-      host: "{{ ansible_default_ipv4["address"] }}"
+      host: "{{ ansible_default_ipv4['address'] }}"
       port: 80
       ratio: 1
       description: "nginx server"
@@ -162,7 +162,7 @@ EXAMPLES = '''
       state: "absent"
       pool: "my-pool"
       partition: "Common"
-      host: "{{ ansible_default_ipv4["address"] }}"
+      host: "{{ ansible_default_ipv4['address'] }}"
       port: 80
   delegate_to: localhost
 
@@ -190,7 +190,7 @@ EXAMPLES = '''
       monitor_state: "disabled"
       pool: "my-pool"
       partition: "Common"
-      host: "{{ ansible_default_ipv4["address"] }}"
+      host: "{{ ansible_default_ipv4['address'] }}"
       port: 80
   delegate_to: localhost
 '''

lib/ansible/modules/network/ios/ios_facts.py

@@ -49,6 +49,7 @@ options:
 EXAMPLES = """
 # Note: examples below use the following provider dict to handle
 #       transport and authentication to the node.
+---
 vars:
   cli:
     host: "{{ inventory_hostname }}"
@@ -56,6 +57,7 @@ vars:
     password: cisco
     transport: cli
 
+---
 # Collect all facts from the device
 - ios_facts:
     gather_subset: all

lib/ansible/modules/network/iosxr/iosxr_command.py

@@ -95,7 +95,7 @@ tasks:
       wait_for: result[0] contains IOS-XR
 
   - name: run multiple commands on remote nodes
-     iosxr_command:
+    iosxr_command:
       commands:
         - show version
         - show interfaces

lib/ansible/modules/network/junos/_junos_template.py

@@ -99,10 +99,12 @@ EXAMPLES = """
     comment: update system config
 
 - name: replace config hierarchy
+  junos_template:
     src: config.j2
     action: replace
 
 - name: overwrite the config
+  junos_template:
     src: config.j2
     action: overwrite
 """

lib/ansible/modules/network/junos/junos_command.py

@@ -110,12 +110,14 @@ notes:
 EXAMPLES = """
 # Note: examples below use the following provider dict to handle
 #       transport and authentication to the node.
+---
 vars:
   netconf:
     host: "{{ inventory_hostname }}"
     username: ansible
     password: Ansible
 
+---
 - name: run a set of commands
   junos_command:
     commands: ['show version', 'show ip route']

lib/ansible/modules/network/junos/junos_config.py

@@ -146,12 +146,14 @@ notes:
 EXAMPLES = """
 # Note: examples below use the following provider dict to handle
 #       transport and authentication to the node.
+---
 vars:
   netconf:
     host: "{{ inventory_hostname }}"
     username: ansible
     password: Ansible
 
+---
 - name: load configure file into device
   junos_config:
     src: srx.cfg

lib/ansible/modules/network/junos/junos_netconf.py

@@ -58,6 +58,7 @@ options:
 EXAMPLES = """
 # Note: examples below use the following provider dict to handle
 #       transport and authentication to the node.
+---
 vars:
   cli:
     host: "{{ inventory_hostname }}"
@@ -65,6 +66,7 @@ vars:
     password: Ansible
     transport: cli
 
+---
 - name: enable netconf service on port 830
   junos_netconf:
     listens_on: 830

lib/ansible/modules/network/nmcli.py

@@ -361,26 +361,26 @@ EXAMPLES='''
       - '{{ nmcli_team_slave }}'
 
 ###### Working with all cloud nodes - Bonding
- - name: try nmcli add bond - conn_name only & ip4 gw4 mode
-   nmcli:
-     type: bond
-     conn_name: '{{ item.conn_name }}'
-     ip4: '{{ item.ip4 }}'
-     gw4: '{{ item.gw4 }}'
-     mode: '{{ item.mode }}'
-     state: present
-   with_items:
-     - '{{ nmcli_bond }}'
+  - name: try nmcli add bond - conn_name only & ip4 gw4 mode
+    nmcli:
+      type: bond
+      conn_name: '{{ item.conn_name }}'
+      ip4: '{{ item.ip4 }}'
+      gw4: '{{ item.gw4 }}'
+      mode: '{{ item.mode }}'
+      state: present
+    with_items:
+      - '{{ nmcli_bond }}'
 
- - name: try nmcli add bond-slave
-   nmcli:
-     type: bond-slave
-     conn_name: '{{ item.conn_name }}'
-     ifname: '{{ item.ifname }}'
-     master: '{{ item.master }}'
-     state: present
-   with_items:
-     - '{{ nmcli_bond_slave }}'
+  - name: try nmcli add bond-slave
+    nmcli:
+      type: bond-slave
+      conn_name: '{{ item.conn_name }}'
+      ifname: '{{ item.ifname }}'
+      master: '{{ item.master }}'
+      state: present
+    with_items:
+      - '{{ nmcli_bond_slave }}'
 
 ##### Working with all cloud nodes - Ethernet
   - name: nmcli add Ethernet - conn_name only & ip4 gw4
@@ -394,8 +394,6 @@ EXAMPLES='''
       - '{{ nmcli_ethernet }}'
 
 ## playbook-del.yml example
-
----
 - hosts: openstack-stage
   remote_user: root
   tasks:

lib/ansible/modules/network/nxos/nxos_bgp_neighbor_af.py

@@ -259,8 +259,8 @@ options:
         choices: ['present','absent']
 '''
 EXAMPLES = '''
-configure RR client
-- nxos_bgp_neighbor_af:
+- name: configure RR client
+  nxos_bgp_neighbor_af:
     asn: 65535
     neighbor: '3.3.3.3'
     afi: ipv4

lib/ansible/modules/network/nxos/nxos_command.py

@@ -91,6 +91,7 @@ options:
 EXAMPLES = """
 # Note: examples below use the following provider dict to handle
 #       transport and authentication to the node.
+---
 vars:
   cli:
     host: "{{ inventory_hostname }}"
@@ -98,6 +99,7 @@ vars:
     password: admin
     transport: cli
 
+---
 - name: run show version on remote devices
   nxos_command:
     commands: show version
@@ -110,7 +112,7 @@ vars:
     provider: "{{ cli }}"
 
 - name: run multiple commands on remote nodes
-   nxos_command:
+  nxos_command:
     commands:
       - show version
       - show interfaces

lib/ansible/modules/network/nxos/nxos_config.py

@@ -164,6 +164,7 @@ options:
 EXAMPLES = """
 # Note: examples below use the following provider dict to handle
 #       transport and authentication to the node.
+---
 vars:
   cli:
     host: "{{ inventory_hostname }}"
@@ -171,6 +172,7 @@ vars:
     password: admin
     transport: cli
 
+---
 - name: configure top level configuration and save it
   nxos_config:
     lines: hostname {{ inventory_hostname }}

lib/ansible/modules/network/nxos/nxos_facts.py

@@ -53,6 +53,7 @@ options:
 EXAMPLES = """
 # Note: examples below use the following provider dict to handle
 #       transport and authentication to the node.
+---
 vars:
   cli:
     host: "{{ inventory_hostname }}"
@@ -60,6 +61,7 @@ vars:
     password: admin
     transport: cli
 
+---
 - nxos_facts:
     gather_subset: all
 

lib/ansible/modules/network/nxos/nxos_install_os.py

@@ -68,33 +68,33 @@ EXAMPLES = '''
         username: "{{ un }}"
         password: "{{ pwd }}"
         transport: nxapi
-    rescue:
-      - name: Wait for device to perform checks
-        wait_for:
-          port: 22
-          state: stopped
-          timeout: 300
-          delay: 60
-          host: "{{ inventory_hostname }}"
-      - name: Wait for device to come back up
-        wait_for:
-          port: 22
-          state: started
-          timeout: 300
-          delay: 60
-          host: "{{ inventory_hostname }}"
-      - name: Check installed OS
-        nxos_command:
-          commands:
-            - show version
-          username: "{{ un }}"
-          password: "{{ pwd }}"
-          host: "{{ inventory_hostname }}"
-          transport: nxapi
-        register: output
-      - assert:
-          that:
-            - output['stdout'][0]['kickstart_ver_str'] == '7.0(3)I4(1)'
+  rescue:
+    - name: Wait for device to perform checks
+      wait_for:
+        port: 22
+        state: stopped
+        timeout: 300
+        delay: 60
+        host: "{{ inventory_hostname }}"
+    - name: Wait for device to come back up
+      wait_for:
+        port: 22
+        state: started
+        timeout: 300
+        delay: 60
+        host: "{{ inventory_hostname }}"
+    - name: Check installed OS
+      nxos_command:
+        commands:
+          - show version
+        username: "{{ un }}"
+        password: "{{ pwd }}"
+        host: "{{ inventory_hostname }}"
+        transport: nxapi
+      register: output
+    - assert:
+        that:
+          - output['stdout'][0]['kickstart_ver_str'] == '7.0(3)I4(1)'
 '''
 
 RETURN = '''

lib/ansible/modules/network/nxos/nxos_interface.py

@@ -89,48 +89,49 @@ options:
 '''
 
 EXAMPLES = '''
-- name Ensure an interface is a Layer 3 port and that it has the proper description
+- name: Ensure an interface is a Layer 3 port and that it has the proper description
   nxos_interface:
     interface: Ethernet1/1
     description: 'Configured by Ansible'
     mode: layer3
     host: 68.170.147.165
 
-- name Admin down an interface
+- name: Admin down an interface
   nxos_interface:
     interface: Ethernet2/1
     host: 68.170.147.165
     admin_state: down
 
-- name Remove all loopback interfaces
+- name: Remove all loopback interfaces
   nxos_interface:
     interface: loopback
     state: absent
     host: 68.170.147.165
 
-- name Remove all logical interfaces
+- name: Remove all logical interfaces
   nxos_interface:
     interface_type: "{{ item }} "
     state: absent
     host: "{{ inventory_hostname }}"
-
   with_items:
     - loopback
     - portchannel
     - svi
     - nve
-- name Admin up all ethernet interfaces
+
+- name: Admin up all ethernet interfaces
   nxos_interface:
     interface: ethernet
     host: 68.170.147.165
     admin_state: up
 
-- name Admin down ALL interfaces (physical and logical)
+- name: Admin down ALL interfaces (physical and logical)
   nxos_interface:
     interface: all
     host: 68.170.147.165
     admin_state: down
 '''
+
 RETURN = '''
 proposed:
     description: k/v pairs of parameters passed into module

lib/ansible/modules/network/openswitch/_ops_template.py

@@ -76,14 +76,14 @@ options:
 
 EXAMPLES = """
 - name: set hostname with file lookup
-    ops_template:
+  ops_template:
     src: ./hostname.json
     backup: yes
     remote_user: admin
     become: yes
 
 - name: set hostname with var
-    ops_template:
+  ops_template:
     src: "{{ config }}"
     remote_user: admin
     become: yes

lib/ansible/modules/network/openswitch/ops_command.py

@@ -85,6 +85,7 @@ options:
 EXAMPLES = """
 # Note: examples below use the following provider dict to handle
 #       transport and authentication to the node.
+---
 vars:
   cli:
     host: "{{ inventory_hostname }}"
@@ -92,6 +93,7 @@ vars:
     password: netop
     transport: cli
 
+---
 - ops_command:
     commands:
       - show version

lib/ansible/modules/network/openswitch/ops_config.py

@@ -139,12 +139,14 @@ options:
 EXAMPLES = """
 # Note: examples below use the following provider dict to handle
 #       transport and authentication to the node.
+---
 vars:
   cli:
     host: "{{ inventory_hostname }}"
     username: netop
     password: netop
 
+---
 - name: configure hostname over cli
   ops_config:
     lines:

lib/ansible/modules/network/openswitch/ops_facts.py

@@ -73,6 +73,7 @@ options:
 EXAMPLES = """
 # Note: examples below use the following provider dict to handle
 #       transport and authentication to the node.
+---
 vars:
   cli:
     host: "{{ inventory_hostname }}"
@@ -85,6 +86,7 @@ vars:
     password: netop
     transport: rest
 
+---
 - ops_facts:
     gather_subset: all
     provider: "{{ rest }}"

lib/ansible/modules/network/sros/sros_command.py

@@ -85,6 +85,7 @@ options:
 EXAMPLES = """
 # Note: examples below use the following provider dict to handle
 #       transport and authentication to the node.
+---
 vars:
   cli:
     host: "{{ inventory_hostname }}"
@@ -92,6 +93,7 @@ vars:
     password: admin
     transport: cli
 
+---
 tasks:
   - name: run show version on remote devices
     sros_command:
@@ -105,7 +107,7 @@ tasks:
       provider: "{{ cli }}"
 
   - name: run multiple commands on remote nodes
-     sros_command:
+    sros_command:
       commands:
         - show version
         - show port detail

lib/ansible/modules/network/sros/sros_config.py

@@ -160,6 +160,7 @@ options:
 EXAMPLES = """
 # Note: examples below use the following provider dict to handle
 #       transport and authentication to the node.
+---
 vars:
   cli:
     host: "{{ inventory_hostname }}"
@@ -167,19 +168,20 @@ vars:
     password: admin
     transport: cli
 
+---
 - name: enable rollback location
-    sros_config:
+  sros_config:
     lines: configure system rollback rollback-location "cf3:/ansible"
     provider: "{{ cli }}"
 
 - name: set system name to {{ inventory_hostname }} using one line
-    sros_config:
+  sros_config:
     lines:
         - configure system name "{{ inventory_hostname }}"
     provider: "{{ cli }}"
 
 - name: set system name to {{ inventory_hostname }} using parents
-    sros_config:
+  sros_config:
     lines:
         - 'name "{{ inventory_hostname }}"'
     parents:
@@ -189,7 +191,7 @@ vars:
     backup: yes
 
 - name: load config from file
-    sros_config:
+  sros_config:
       src: "{{ inventory_hostname }}.cfg"
       provider: "{{ cli }}"
       save: yes

lib/ansible/modules/network/sros/sros_rollback.py

@@ -79,6 +79,7 @@ options:
 EXAMPLES = """
 # Note: examples below use the following provider dict to handle
 #       transport and authentication to the node.
+---
 vars:
   cli:
     host: "{{ inventory_hostname }}"
@@ -86,6 +87,7 @@ vars:
     password: admin
     transport: cli
 
+---
 - name: configure rollback location
   sros_rollback:
     rollback_location: "cb3:/ansible"

lib/ansible/modules/notification/jabber.py

@@ -84,7 +84,7 @@ EXAMPLES = '''
     msg: Ansible task finished
 
 # send a message, specifying the host and port
-- jabber
+- jabber:
     user: mybot@example.net
     host: talk.example.net
     port: 5223

lib/ansible/modules/notification/mqtt.py

@@ -119,7 +119,7 @@ author: "Jan-Piet Mens (@jpmens)"
 '''
 
 EXAMPLES = '''
--  mqtt:
+- mqtt:
     topic: 'service/ansible/{{ ansible_hostname }}'
     payload: 'Hello at {{ ansible_date_time.iso8601 }}'
     qos: 0

lib/ansible/modules/notification/sendgrid.py

@@ -124,7 +124,7 @@ EXAMPLES = '''
   delegate_to: localhost
 
 # send an email to more than one recipient that the build failed
-- sendgrid
+- sendgrid:
       username: "{{ sendgrid_username }}"
       password: "{{ sendgrid_password }}"
       from_address: "build@mycompany.com"

lib/ansible/modules/notification/slack.py

@@ -162,7 +162,7 @@ EXAMPLES = """
         title: System load
         fields:
           - title: System A
-            value: load average: 0,74, 0,66, 0,63"
+            value: "load average: 0,74, 0,66, 0,63"
             short: True
           - title: System B
             value: 'load average: 5,16, 4,64, 2,43'

lib/ansible/modules/notification/telegram.py

@@ -54,8 +54,8 @@ options:
 
 EXAMPLES = """
 
-send a message to chat in playbook
-- telegram:
+- name: send a message to chat in playbook
+  telegram:
     token: 'bot9999999:XXXXXXXXXXXXXXXXXXXXXXX'
     chat_id: 000000
     msg: Ansible task finished

lib/ansible/modules/packaging/language/bower.py

@@ -76,7 +76,7 @@ EXAMPLES = '''
     name: bootstrap
 
 - name: Install "bootstrap" bower package on version 3.1.1.
- bower:
+  bower:
     name: bootstrap
     version: '3.1.1'
 

lib/ansible/modules/packaging/language/npm.py

@@ -81,44 +81,44 @@ options:
 '''
 
 EXAMPLES = '''
-description: Install "coffee-script" node.js package.
-- npm:
+- name: Install "coffee-script" node.js package.
+  npm:
     name: coffee-script
     path: /app/location
 
-description: Install "coffee-script" node.js package on version 1.6.1.
-- npm:
+- name: Install "coffee-script" node.js package on version 1.6.1.
+  npm:
     name: coffee-script
     version: '1.6.1'
     path: /app/location
 
-description: Install "coffee-script" node.js package globally.
-- npm:
+- name: Install "coffee-script" node.js package globally.
+  npm:
     name: coffee-script
     global: yes
 
-description: Remove the globally package "coffee-script".
-- npm:
+- name: Remove the globally package "coffee-script".
+  npm:
     name: coffee-script
     global: yes
     state: absent
 
-description: Install "coffee-script" node.js package from custom registry.
-- npm:
+- name: Install "coffee-script" node.js package from custom registry.
+  npm:
     name: coffee-script
     registry: 'http://registry.mysite.com'
 
-description: Install packages based on package.json.
-- npm:
+- name: Install packages based on package.json.
+  npm:
     path: /app/location
 
-description: Update packages based on package.json to their latest version.
-- npm:
+- name: Update packages based on package.json to their latest version.
+  npm:
     path: /app/location
     state: latest
 
-description: Install packages based on package.json using the npm installed with nvm v0.10.1.
-- npm:
+- name: Install packages based on package.json using the npm installed with nvm v0.10.1.
+  npm:
     path: /app/location
     executable: /opt/nvm/v0.10.1/bin/npm
     state: present

lib/ansible/modules/packaging/os/sorcery.py

@@ -128,8 +128,8 @@ EXAMPLES = '''
 
 # Playbook: make sure spells with/without required dependencies (if any) are installed
 - sorcery:
-    name: {{ item.spell }}
-    depends: {{ item.depends | default(None) }}
+    name: "{{ item.spell }}"
+    depends: "{{ item.depends | default(None) }}"
     state: present
   with_items:
     - { spell: 'vifm', depends: '+file,-gtk+2' }

lib/ansible/modules/packaging/os/zypper_repository.py

@@ -145,7 +145,7 @@ EXAMPLES = '''
 
 # Force refresh of a repository
 - zypper_repository:
-    repo: 'http://my_internal_ci_repo/repo
+    repo: 'http://my_internal_ci_repo/repo'
     name: my_ci_repo
     state: present
     runrefresh: yes

lib/ansible/modules/remote_management/foreman/katello.py

@@ -57,7 +57,8 @@ options:
 '''
 
 EXAMPLES = '''
-Simple Example:
+---
+# Simple Example:
 
 - name: "Create Product"
   local_action:
@@ -69,9 +70,8 @@ Simple Example:
       params:
         name: "Centos 7"
 
-Abstraction Example:
-
-katello.yml
+# Abstraction Example:
+# katello.yml
 ---
 - name: "{{ name }}"
   local_action:
@@ -82,7 +82,7 @@ katello.yml
       entity: "{{ entity }}"
       params: "{{ params }}"
 
-tasks.yml
+# tasks.yml
 ---
 - include: katello.yml
   vars:

lib/ansible/modules/storage/netapp/netapp_e_snapshot_volume.py

@@ -96,7 +96,7 @@ EXAMPLES = """
     - name: Snapshot volume
       netapp_e_snapshot_volume:
         ssid: "{{ ssid }}"
-        api_url: "{{ netapp_api_url }}"/
+        api_url: "{{ netapp_api_url }}/"
         api_username: "{{ netapp_api_username }}"
         api_password: "{{ netapp_api_password }}"
         state: present

lib/ansible/modules/storage/zfs/zfs_facts.py

@@ -78,13 +78,19 @@ options:
 '''
 
 EXAMPLES = '''
-name: Gather facts about ZFS dataset rpool/export/home
-zfs_facts: dataset=rpool/export/home
+- name: Gather facts about ZFS dataset rpool/export/home
+  zfs_facts:
+    dataset: rpool/export/home
 
-name: Report space usage on ZFS filesystems under data/home
-zfs_facts: name=data/home recurse=yes type=filesystem
-debug: msg='ZFS dataset {{ item.name }} consumes {{ item.used }} of disk space.'
-with_items: '{{ ansible_zfs_datasets }}
+- name: Report space usage on ZFS filesystems under data/home
+  zfs_facts:
+    name: data/home
+    recurse: yes
+    type: filesystem
+
+- debug:
+    msg: 'ZFS dataset {{ item.name }} consumes {{ item.used }} of disk space.'
+  with_items: '{{ ansible_zfs_datasets }}'
 '''
 
 RETURN = '''

lib/ansible/modules/system/crypttab.py

@@ -91,7 +91,7 @@ EXAMPLES = '''
     state: opts_present
     opts: discard
   with_items: '{{ ansible_mounts }}'
-  when: '/dev/mapper/luks-' in {{ item.device }}
+  when: "'/dev/mapper/luks-' in {{ item.device }}"
 '''
 
 from ansible.module_utils.basic import *