1
0
Fork 0
mirror of https://github.com/ansible-collections/community.general.git synced 2024-09-14 20:13:21 +02:00

Cosmetic changes to documentation and arg_spec

I didn't want to drag this any longer than it already has. Hope I am doing well.
This commit is contained in:
Dag Wieers 2017-09-10 01:29:30 +02:00
parent d13b62907b
commit 6c4966547d

View file

@ -1,31 +1,30 @@
#!/usr/bin/python
# -*- coding: utf-8 -*-
#
# (c) 2015, Linus Unnebäck <linus@folkdatorn.se>
# Copyright: (c) 2015, Linus Unnebäck <linus@folkdatorn.se>
# GNU General Public License v3.0+ (see COPYING or https://www.gnu.org/licenses/gpl-3.0.txt)
from __future__ import absolute_import, division, print_function
__metaclass__ = type
ANSIBLE_METADATA = {'metadata_version': '1.1',
'status': ['preview'],
'supported_by': 'core'}
DOCUMENTATION = '''
---
module: iptables
short_description: Modify the systems iptables
requirements: []
version_added: "2.0"
author: Linus Unnebäck (@LinusU) <linus@folkdatorn.se>
author:
- Linus Unnebäck (@LinusU) <linus@folkdatorn.se>
description:
- Iptables is used to set up, maintain, and inspect the tables of IP packet
filter rules in the Linux kernel. This module does not handle the saving
and/or loading of rules, but rather only manipulates the current rules
that are present in memory. This is the same as the behaviour of the
"iptables" and "ip6tables" command which this module uses internally.
filter rules in the Linux kernel.
- This module does not handle the saving and/or loading of rules, but rather
only manipulates the current rules that are present in memory. This is the
same as the behaviour of the C(iptables) and C(ip6tables) command which
this module uses internally.
notes:
- This module just deals with individual rules. If you need advanced
chaining of rules the recommended way is to template the iptables restore
@ -37,71 +36,74 @@ options:
should operate on. If the kernel is configured with automatic module
loading, an attempt will be made to load the appropriate module for
that table if it is not already there.
choices: [ filter, nat, mangle, raw, security ]
default: filter
choices: [ "filter", "nat", "mangle", "raw", "security" ]
state:
description:
- Whether the rule should be absent or present.
choices: [ absent, present ]
default: present
choices: [ "present", "absent" ]
action:
version_added: "2.2"
description:
- Whether the rule should be appended at the bottom or inserted at the
top. If the rule already exists the chain won't be modified.
- Whether the rule should be appended at the bottom or inserted at the top.
- If the rule already exists the chain won't be modified.
choices: [ append, insert ]
default: append
choices: [ "append", "insert" ]
version_added: "2.2"
ip_version:
description:
- Which version of the IP protocol this rule should apply to.
choices: [ ipv4, ipv6 ]
default: ipv4
choices: [ "ipv4", "ipv6" ]
chain:
description:
- "Chain to operate on. This option can either be the name of a user
defined chain or any of the builtin chains: 'INPUT', 'FORWARD',
'OUTPUT', 'PREROUTING', 'POSTROUTING', 'SECMARK', 'CONNSECMARK'."
- Chain to operate on.
- "This option can either be the name of a user defined chain or any of
the builtin chains: 'INPUT', 'FORWARD', 'OUTPUT', 'PREROUTING',
'POSTROUTING', 'SECMARK', 'CONNSECMARK'."
protocol:
description:
- The protocol of the rule or of the packet to check. The specified
protocol can be one of tcp, udp, udplite, icmp, esp, ah, sctp or the
special keyword "all", or it can be a numeric value, representing one
of these protocols or a different one. A protocol name from
/etc/protocols is also allowed. A "!" argument before the protocol
inverts the test. The number zero is equivalent to all. "all" will
match with all protocols and is taken as default when this option is
omitted.
- The protocol of the rule or of the packet to check.
- The specified protocol can be one of tcp, udp, udplite, icmp, esp,
ah, sctp or the special keyword "all", or it can be a numeric value,
representing one of these protocols or a different one. A protocol
name from /etc/protocols is also allowed. A "!" argument before the
protocol inverts the test. The number zero is equivalent to all.
"all" will match with all protocols and is taken as default when this
option is omitted.
source:
description:
- Source specification. Address can be either a network name,
a hostname, a network IP address (with /mask), or a plain IP address.
Hostnames will be resolved once only, before the rule is submitted to
- Source specification.
- Address can be either a network name, a hostname, a network IP address
(with /mask), or a plain IP address.
- Hostnames will be resolved once only, before the rule is submitted to
the kernel. Please note that specifying any name to be resolved with
a remote query such as DNS is a really bad idea. The mask can be
either a network mask or a plain number, specifying the number of 1's
at the left side of the network mask. Thus, a mask of 24 is equivalent
to 255.255.255.0. A "!" argument before the address specification
inverts the sense of the address.
a remote query such as DNS is a really bad idea.
- The mask can be either a network mask or a plain number, specifying
the number of 1's at the left side of the network mask. Thus, a mask
of 24 is equivalent to 255.255.255.0. A "!" argument before the
address specification inverts the sense of the address.
destination:
description:
- Destination specification. Address can be either a network name,
a hostname, a network IP address (with /mask), or a plain IP address.
Hostnames will be resolved once only, before the rule is submitted to
- Destination specification.
- Address can be either a network name, a hostname, a network IP address
(with /mask), or a plain IP address.
- Hostnames will be resolved once only, before the rule is submitted to
the kernel. Please note that specifying any name to be resolved with
a remote query such as DNS is a really bad idea. The mask can be
either a network mask or a plain number, specifying the number of 1's
at the left side of the network mask. Thus, a mask of 24 is equivalent
to 255.255.255.0. A "!" argument before the address specification
inverts the sense of the address.
a remote query such as DNS is a really bad idea.
- The mask can be either a network mask or a plain number, specifying
the number of 1's at the left side of the network mask. Thus, a mask
of 24 is equivalent to 255.255.255.0. A "!" argument before the
address specification inverts the sense of the address.
tcp_flags:
version_added: "2.4"
description:
- TCP flags specification. tcp_flags expects a dict with the two keys
"flags" and "flags_set". The "flags" list is the mask, a list of
flags you want to examine. The "flags_set" list tells which one(s)
should be set. If one of the two values is missing, the --tcp-flags option
will be ignored.
- TCP flags specification.
- C(tcp_flags) expects a dict with the two keys C(flags) and C(flags_set).
- The C(flags) list is the mask, a list of flags you want to examine.
- The C(flags_set) list tells which one(s) should be set.
If one of the two values is missing, the --tcp-flags option will be ignored.
default: {}
version_added: "2.4"
match:
description:
- Specifies a match to use, that is, an extension module that tests for
@ -154,18 +156,18 @@ options:
counters of a rule (during INSERT, APPEND, REPLACE operations).
source_port:
description:
- "Source port or port range specification. This can either be a service
- Source port or port range specification. This can either be a service
name or a port number. An inclusive range can also be specified, using
the format first:last. If the first port is omitted, '0' is assumed;
if the last is omitted, '65535' is assumed. If the first port is
greater than the second one they will be swapped."
greater than the second one they will be swapped.
destination_port:
description:
- "Destination port or port range specification. This can either be
- Destination port or port range specification. This can either be
a service name or a port number. An inclusive range can also be
specified, using the format first:last. If the first port is omitted,
'0' is assumed; if the last is omitted, '65535' is assumed. If the
first port is greater than the second one they will be swapped."
first port is greater than the second one they will be swapped.
to_ports:
description:
- "This specifies a destination port or range of ports to use: without
@ -173,81 +175,84 @@ options:
rule also specifies one of the following protocols: tcp, udp, dccp or
sctp."
to_destination:
version_added: "2.1"
description:
- "This specifies a destination address to use with DNAT: without
this, the destination address is never altered."
- This specifies a destination address to use with DNAT.
- Without this, the destination address is never altered.
version_added: "2.1"
to_source:
description:
- This specifies a source address to use with SNAT.
- Without this, the source address is never altered.
version_added: "2.2"
description:
- "This specifies a source address to use with SNAT: without
this, the source address is never altered."
syn:
version_added: "2.5"
description:
- "This allows matching packets that have the SYN bit set and the ACK
and RST bits unset. When negated, this matches all packets with
the RST or the ACK bits set."
- This allows matching packets that have the SYN bit set and the ACK
and RST bits unset.
- When negated, this matches all packets with the RST or the ACK bits set.
choices: [ ignore, match, negate ]
default: ignore
version_added: "2.5"
set_dscp_mark:
version_added: "2.1"
description:
- "This allows specifying a DSCP mark to be added to packets.
It takes either an integer or hex value. Mutually exclusive with
C(set_dscp_mark_class)."
- This allows specifying a DSCP mark to be added to packets.
It takes either an integer or hex value.
- Mutually exclusive with C(set_dscp_mark_class).
version_added: "2.1"
set_dscp_mark_class:
version_added: "2.1"
description:
- "This allows specifying a predefined DiffServ class which will be
translated to the corresponding DSCP mark. Mutually exclusive with
C(set_dscp_mark)."
- This allows specifying a predefined DiffServ class which will be
translated to the corresponding DSCP mark.
- Mutually exclusive with C(set_dscp_mark).
version_added: "2.1"
comment:
description:
- "This specifies a comment that will be added to the rule"
- This specifies a comment that will be added to the rule.
ctstate:
description:
- "ctstate is a list of the connection states to match in the conntrack
- "C(ctstate) is a list of the connection states to match in the conntrack
module.
Possible states are: 'INVALID', 'NEW', 'ESTABLISHED', 'RELATED',
'UNTRACKED', 'SNAT', 'DNAT'"
choices: [ DNAT, ESTABLISHED, INVALID, NEW, RELATED, SNAT, UNTRACKED ]
default: []
limit:
description:
- "Specifies the maximum average number of matches to allow per second.
The number can specify units explicitly, using `/second', `/minute',
- Specifies the maximum average number of matches to allow per second.
- The number can specify units explicitly, using `/second', `/minute',
`/hour' or `/day', or parts of them (so `5/second' is the same as
`5/s')."
`5/s').
limit_burst:
version_added: "2.1"
description:
- "Specifies the maximum burst before the above limit kicks in."
- Specifies the maximum burst before the above limit kicks in.
version_added: "2.1"
uid_owner:
version_added: "2.1"
description:
- "Specifies the UID or username to use in match by owner rule."
- Specifies the UID or username to use in match by owner rule.
version_added: "2.1"
reject_with:
description:
- Specifies the error packet type to return while rejecting.
version_added: "2.1"
description:
- "Specifies the error packet type to return while rejecting."
icmp_type:
version_added: "2.2"
description:
- "This allows specification of the ICMP type, which can be a numeric
- This allows specification of the ICMP type, which can be a numeric
ICMP type, type/code pair, or one of the ICMP type names shown by the
command 'iptables -p icmp -h'"
command 'iptables -p icmp -h'
version_added: "2.2"
flush:
version_added: "2.2"
description:
- "Flushes the specified table and chain of all rules. If no chain is
specified then the entire table is purged. Ignores all other
parameters."
- Flushes the specified table and chain of all rules.
- If no chain is specified then the entire table is purged.
- Ignores all other parameters.
version_added: "2.2"
policy:
version_added: "2.2"
description:
- "Set the policy for the chain to the given target. Valid targets are
ACCEPT, DROP, QUEUE, RETURN. Only built in chains can have policies.
This parameter requires the chain parameter. Ignores all other
parameters."
- Set the policy for the chain to the given target.
- Only built-in chains can have policies.
- This parameter requires the C(chain) parameter.
- Ignores all other parameters.
choices: [ ACCEPT, DROP, QUEUE, RETURN ]
version_added: "2.2"
'''
EXAMPLES = '''
@ -468,53 +473,39 @@ def main():
module = AnsibleModule(
supports_check_mode=True,
argument_spec=dict(
table=dict(
default='filter',
choices=['filter', 'nat', 'mangle', 'raw', 'security']),
state=dict(
default='present',
choices=['present', 'absent']),
action=dict(
default='append',
type='str',
choices=['append', 'insert']),
ip_version=dict(
default='ipv4',
choices=['ipv4', 'ipv6']),
chain=dict(default=None, type='str'),
protocol=dict(default=None, type='str'),
source=dict(default=None, type='str'),
to_source=dict(default=None, type='str'),
destination=dict(default=None, type='str'),
to_destination=dict(default=None, type='str'),
match=dict(default=[], type='list'),
tcp_flags=dict(default={}, type='dict'),
jump=dict(default=None, type='str'),
goto=dict(default=None, type='str'),
in_interface=dict(default=None, type='str'),
out_interface=dict(default=None, type='str'),
fragment=dict(default=None, type='str'),
set_counters=dict(default=None, type='str'),
source_port=dict(default=None, type='str'),
destination_port=dict(default=None, type='str'),
to_ports=dict(default=None, type='str'),
set_dscp_mark=dict(default=None, type='str'),
set_dscp_mark_class=dict(default=None, type='str'),
comment=dict(default=None, type='str'),
ctstate=dict(default=[], type='list'),
limit=dict(default=None, type='str'),
limit_burst=dict(default=None, type='str'),
uid_owner=dict(default=None, type='str'),
reject_with=dict(default=None, type='str'),
icmp_type=dict(default=None, type='str'),
syn=dict(
default='ignore',
choices=['ignore', 'match', 'negate']),
flush=dict(default=False, type='bool'),
policy=dict(
default=None,
type='str',
choices=['ACCEPT', 'DROP', 'QUEUE', 'RETURN']),
table=dict(type='str', default='filter', choices=['filter', 'nat', 'mangle', 'raw', 'security']),
state=dict(type='str', default='present', choices=['absent', 'present']),
action=dict(type='str', default='append', choices=['append', 'insert']),
ip_version=dict(type='str', default='ipv4', choices=['ipv4', 'ipv6']),
chain=dict(type='str'),
protocol=dict(type='str'),
source=dict(type='str'),
to_source=dict(type='str'),
destination=dict(type='str'),
to_destination=dict(type='str'),
match=dict(type='list', default=[]),
tcp_flags=dict(type='dict', default={}),
jump=dict(type='str'),
goto=dict(type='str'),
in_interface=dict(type='str'),
out_interface=dict(type='str'),
fragment=dict(type='str'),
set_counters=dict(type='str'),
source_port=dict(type='str'),
destination_port=dict(type='str'),
to_ports=dict(type='str'),
set_dscp_mark=dict(type='str'),
set_dscp_mark_class=dict(type='str'),
comment=dict(type='str'),
ctstate=dict(type='list', default=[]),
limit=dict(type='str'),
limit_burst=dict(type='str'),
uid_owner=dict(type='str'),
reject_with=dict(type='str'),
icmp_type=dict(type='str'),
syn=dict(type='str', default='ignore', choices=['ignore', 'match', 'negate']),
flush=dict(type='bool', default=False),
policy=dict(type='str', choices=['ACCEPT', 'DROP', 'QUEUE', 'RETURN']),
),
mutually_exclusive=(
['set_dscp_mark', 'set_dscp_mark_class'],