1
0
Fork 0
mirror of https://github.com/ansible-collections/community.general.git synced 2024-09-14 20:13:21 +02:00

Added support for new Ansible Infra (network_cli plugin, cliconf, module utils cleanup and test) for dellos10 Support t (#34915)

* Support for network_cli plugin and tests

* Fixed ansible-test * issues

* Fixed Pylint warning

* Fixed the sanity test errors

* Fix YAMLlinter issue - removed blank spaces

* Fixed Python 3 failures

* Fixed the PEP8 issue

* Fix sanity --test validate-modules

* Reverted the changes to the doc fragments
This commit is contained in:
Senthil Kumar Ganesan 2018-01-25 04:37:27 -08:00 committed by John R Barker
parent 1f544ed6cc
commit 2f46f8f944
51 changed files with 22371 additions and 160 deletions

View file

@ -124,8 +124,7 @@ def load_config(module, commands):
for command in to_list(commands): for command in to_list(commands):
if command == 'end': if command == 'end':
continue continue
cmd = {'command': command, 'prompt': WARNING_PROMPTS_RE, 'answer': 'yes'} rc, out, err = exec_command(module, command)
rc, out, err = exec_command(module, module.jsonify(cmd))
if rc != 0: if rc != 0:
module.fail_json(msg=to_text(err, errors='surrogate_or_strict'), command=command, rc=rc) module.fail_json(msg=to_text(err, errors='surrogate_or_strict'), command=command, rc=rc)

View file

@ -45,9 +45,22 @@ options:
See examples. See examples.
required: false required: false
default: null default: null
version_added: "2.2"
match:
description:
- The I(match) argument is used in conjunction with the
I(wait_for) argument to specify the match policy. Valid
values are C(all) or C(any). If the value is set to C(all)
then all conditionals in the wait_for must be satisfied. If
the value is set to C(any) then only one of the values must be
satisfied.
required: false
default: all
choices: ['any', 'all']
version_added: "2.5"
retries: retries:
description: description:
- Specifies the number of retries a command should by tried - Specifies the number of retries a command should be tried
before it is considered failed. The command is run on the before it is considered failed. The command is run on the
target device every retry and evaluated against the target device every retry and evaluated against the
I(wait_for) conditions. I(wait_for) conditions.
@ -64,33 +77,21 @@ options:
""" """
EXAMPLES = """ EXAMPLES = """
# Note: examples below use the following provider dict to handle
# transport and authentication to the node.
vars:
cli:
host: "{{ inventory_hostname }}"
username: admin
password: admin
transport: cli
tasks: tasks:
- name: run show version on remote devices - name: run show version on remote devices
dellos10_command: dellos10_command:
commands: show version commands: show version
provider: "{{ cli }}"
- name: run show version and check to see if output contains OS10 - name: run show version and check to see if output contains OS10
dellos10_command: dellos10_command:
commands: show version commands: show version
wait_for: result[0] contains OS10 wait_for: result[0] contains OS10
provider: "{{ cli }}"
- name: run multiple commands on remote nodes - name: run multiple commands on remote nodes
dellos10_command: dellos10_command:
commands: commands:
- show version - show version
- show interface - show interface
provider: "{{ cli }}"
- name: run multiple commands and evaluate the output - name: run multiple commands and evaluate the output
dellos10_command: dellos10_command:
@ -100,7 +101,6 @@ tasks:
wait_for: wait_for:
- result[0] contains OS10 - result[0] contains OS10
- result[1] contains Ethernet - result[1] contains Ethernet
provider: "{{ cli }}"
""" """
RETURN = """ RETURN = """
@ -109,19 +109,16 @@ stdout:
returned: always apart from low level errors (such as action plugin) returned: always apart from low level errors (such as action plugin)
type: list type: list
sample: ['...', '...'] sample: ['...', '...']
stdout_lines: stdout_lines:
description: The value of stdout split into a list description: The value of stdout split into a list
returned: always apart from low level errors (such as action plugin) returned: always apart from low level errors (such as action plugin)
type: list type: list
sample: [['...', '...'], ['...'], ['...']] sample: [['...', '...'], ['...'], ['...']]
failed_conditions: failed_conditions:
description: The list of conditionals that have failed description: The list of conditionals that have failed
returned: failed returned: failed
type: list type: list
sample: ['...', '...'] sample: ['...', '...']
warnings: warnings:
description: The list of warnings (if any) generated by module based on arguments description: The list of warnings (if any) generated by module based on arguments
returned: always returned: always
@ -220,11 +217,11 @@ def main():
msg = 'One or more conditional statements have not be satisfied' msg = 'One or more conditional statements have not be satisfied'
module.fail_json(msg=msg, failed_conditions=failed_conditions) module.fail_json(msg=msg, failed_conditions=failed_conditions)
result = { result.update({
'changed': False, 'changed': False,
'stdout': responses, 'stdout': responses,
'stdout_lines': list(to_lines(responses)) 'stdout_lines': list(to_lines(responses))
} })
module.exit_json(**result) module.exit_json(**result)

View file

@ -31,15 +31,17 @@ options:
description: description:
- The ordered set of commands that should be configured in the - The ordered set of commands that should be configured in the
section. The commands must be the exact same commands as found section. The commands must be the exact same commands as found
in the device running-config. Note the configuration in the device running-config. Be sure to note the configuration
command syntax as the device config parser automatically modifies some commands. This argument is mutually exclusive with I(src). command syntax as some commands are automatically modified by the
device config parser. This argument is mutually exclusive with I(src).
required: false required: false
default: null default: null
aliases: ['commands'] aliases: ['commands']
parents: parents:
description: description:
- The ordered set of parents that uniquely identify the section - The ordered set of parents that uniquely identify the section
the commands should be checked against. If you omit the parents argument, the commands are checked against the set of top the commands should be checked against. If the parents argument
is omitted, the commands are checked against the set of top
level or global commands. level or global commands.
required: false required: false
default: null default: null
@ -48,15 +50,15 @@ options:
- Specifies the source path to the file that contains the configuration - Specifies the source path to the file that contains the configuration
or configuration template to load. The path to the source file can or configuration template to load. The path to the source file can
either be the full path on the Ansible control host or a relative either be the full path on the Ansible control host or a relative
path from the playbook or role root directory. This argument is mutually path from the playbook or role root directory. This argument is
exclusive with I(lines), I(parents). mutually exclusive with I(lines).
required: false required: false
default: null default: null
before: before:
description: description:
- The ordered set of commands to push on to the command stack if - The ordered set of commands to push on to the command stack if
a change needs to be made. The playbook designer can use this argument a change needs to be made. This allows the playbook designer
to perform configuration commands prior to pushing the opportunity to perform configuration commands prior to pushing
any changes without affecting how the set of commands are matched any changes without affecting how the set of commands are matched
against the system. against the system.
required: false required: false
@ -64,20 +66,20 @@ options:
after: after:
description: description:
- The ordered set of commands to append to the end of the command - The ordered set of commands to append to the end of the command
stack if a change needs to be made. As with I(before), stack if a change needs to be made. Just like with I(before) this
the playbook designer can use this argument to append a set of commands to be allows the playbook designer to append a set of commands to be
executed after the command set. executed after the command set.
required: false required: false
default: null default: null
match: match:
description: description:
- Instructs the module on the way to perform the matching of - Instructs the module on the way to perform the matching of
the set of commands against the current device config. If you set the set of commands against the current device config. If
match to I(line), commands match line by line. If you set match is set to I(line), commands are matched line by line. If
match to I(strict), command lines match by match is set to I(strict), command lines are matched with respect
position. If you set match to I(exact), command lines to position. If match is set to I(exact), command lines
must be an equal match. Finally, if you set match to I(none), the must be an equal match. Finally, if match is set to I(none), the
module does not attempt to compare the source configuration with module will not attempt to compare the source configuration with
the running configuration on the remote device. the running configuration on the remote device.
required: false required: false
default: line default: line
@ -85,10 +87,10 @@ options:
replace: replace:
description: description:
- Instructs the module on the way to perform the configuration - Instructs the module on the way to perform the configuration
on the device. If you set the replace argument to I(line), then on the device. If the replace argument is set to I(line) then
the modified lines push to the device in configuration the modified lines are pushed to the device in configuration
mode. If you set the replace argument to I(block), then the entire mode. If the replace argument is set to I(block) then the entire
command block pushes to the device in configuration mode if any command block is pushed to the device in configuration mode if any
line is not correct. line is not correct.
required: false required: false
default: line default: line
@ -97,9 +99,9 @@ options:
description: description:
- The I(update) argument controls how the configuration statements - The I(update) argument controls how the configuration statements
are processed on the remote device. Valid choices for the I(update) are processed on the remote device. Valid choices for the I(update)
argument are I(merge) and I(check). When you set the argument to argument are I(merge) and I(check). When you set this argument to
I(merge), the configuration changes merge with the current I(merge), the configuration changes merge with the current
device running configuration. When you set the argument to I(check), device running configuration. When you set this argument to I(check)
the configuration updates are determined but not actually configured the configuration updates are determined but not actually configured
on the remote device. on the remote device.
required: false required: false
@ -109,34 +111,36 @@ options:
description: description:
- The C(save) argument instructs the module to save the running- - The C(save) argument instructs the module to save the running-
config to the startup-config at the conclusion of the module config to the startup-config at the conclusion of the module
running. If you specify check mode, this argument is ignored. running. If check mode is specified, this argument is ignored.
required: false required: false
default: no default: no
choices: ['yes', 'no'] choices: ['yes', 'no']
config: config:
description: description:
- The playbook designer can use the C(config) argument to supply - The module, by default, will connect to the remote device and
the base configuration to be used to validate necessary configuration retrieve the current running-config to use as a base for comparing
changes. If you specify this argument, the module against the contents of source. There are times when it is not
does not download the running-config from the remote node. desirable to have the task get the current running-config for
every task in a playbook. The I(config) argument allows the
implementer to pass in the configuration to use as the base
config for comparison.
required: false required: false
default: null default: null
backup: backup:
description: description:
- This argument causes the module to create a full backup of - This argument will cause the module to create a full backup of
the current C(running-config) from the remote device before any the current C(running-config) from the remote device before any
changes are made. The backup file is written to the C(backup) changes are made. The backup file is written to the C(backup)
folder in the playbook root directory. If the directory does not folder in the playbook root directory. If the directory does not
exist, it is created. exist, it is created.
required: false required: false
default: no default: no
choices: ['yes', 'no'] type: bool
""" """
EXAMPLES = """ EXAMPLES = """
- dellos10_config: - dellos10_config:
lines: ['hostname {{ inventory_hostname }}'] lines: ['hostname {{ inventory_hostname }}']
provider: "{{ cli }}"
- dellos10_config: - dellos10_config:
lines: lines:
@ -148,7 +152,6 @@ EXAMPLES = """
parents: ['ip access-list test'] parents: ['ip access-list test']
before: ['no ip access-list test'] before: ['no ip access-list test']
match: exact match: exact
provider: "{{ cli }}"
- dellos10_config: - dellos10_config:
lines: lines:
@ -159,23 +162,19 @@ EXAMPLES = """
parents: ['ip access-list test'] parents: ['ip access-list test']
before: ['no ip access-list test'] before: ['no ip access-list test']
replace: block replace: block
provider: "{{ cli }}"
""" """
RETURN = """ RETURN = """
updates: updates:
description: The set of commands pushed to the remote device. description: The set of commands that will be pushed to the remote device.
returned: Always. returned: always
type: list type: list
sample: ['...', '...'] sample: ['hostname foo', 'router bgp 1', 'router-id 1.1.1.1']
commands:
responses: description: The set of commands that will be pushed to the remote device
description: The set of responses from issuing the commands on the device. returned: always
returned: When not check_mode.
type: list type: list
sample: ['...', '...'] sample: ['hostname foo', 'router bgp 1', 'router-id 1.1.1.1']
saved: saved:
description: Returns whether the configuration is saved to the startup description: Returns whether the configuration is saved to the startup
configuration or not. configuration or not.
@ -202,10 +201,23 @@ def get_candidate(module):
candidate.load(module.params['src']) candidate.load(module.params['src'])
elif module.params['lines']: elif module.params['lines']:
parents = module.params['parents'] or list() parents = module.params['parents'] or list()
candidate.add(module.params['lines'], parents=parents) commands = module.params['lines'][0]
if (isinstance(commands, dict)) and (isinstance((commands['command']), list)):
candidate.add(commands['command'], parents=parents)
elif (isinstance(commands, dict)) and (isinstance((commands['command']), str)):
candidate.add([commands['command']], parents=parents)
else:
candidate.add(module.params['lines'], parents=parents)
return candidate return candidate
def get_running_config(module):
contents = module.params['config']
if not contents:
contents = get_config(module)
return contents
def main(): def main():
argument_spec = dict( argument_spec = dict(
@ -229,8 +241,7 @@ def main():
argument_spec.update(dellos10_argument_spec) argument_spec.update(dellos10_argument_spec)
mutually_exclusive = [('lines', 'src'), mutually_exclusive = [('lines', 'src')]
('parents', 'src')]
module = AnsibleModule(argument_spec=argument_spec, module = AnsibleModule(argument_spec=argument_spec,
mutually_exclusive=mutually_exclusive, mutually_exclusive=mutually_exclusive,
@ -246,46 +257,62 @@ def main():
result = dict(changed=False, saved=False, warnings=warnings) result = dict(changed=False, saved=False, warnings=warnings)
candidate = get_candidate(module)
if match != 'none':
config = get_config(module)
if parents:
contents = get_sublevel_config(config, module)
config = NetworkConfig(contents=contents, indent=1)
else:
config = NetworkConfig(contents=config, indent=1)
configobjs = candidate.difference(config, match=match, replace=replace)
else:
configobjs = candidate.items
if module.params['backup']: if module.params['backup']:
if not module.check_mode: if not module.check_mode:
result['__backup__'] = get_config(module) result['__backup__'] = get_config(module)
commands = list() commands = list()
candidate = get_candidate(module)
if configobjs: if any((module.params['lines'], module.params['src'])):
commands = dumps(configobjs, 'commands') if match != 'none':
commands = commands.split('\n') config = get_running_config(module)
if parents:
contents = get_sublevel_config(config, module)
config = NetworkConfig(contents=contents, indent=1)
else:
config = NetworkConfig(contents=config, indent=1)
configobjs = candidate.difference(config, match=match, replace=replace)
else:
configobjs = candidate.items
if module.params['before']: if configobjs:
commands[:0] = module.params['before'] commands = dumps(configobjs, 'commands')
if ((isinstance((module.params['lines']), list)) and
(isinstance((module.params['lines'][0]), dict)) and
(['prompt', 'answer'].issubset(module.params['lines'][0]))):
if module.params['after']: cmd = {'command': commands,
commands.extend(module.params['after']) 'prompt': module.params['lines'][0]['prompt'],
'answer': module.params['lines'][0]['answer']}
commands = [module.jsonify(cmd)]
else:
commands = commands.split('\n')
if not module.check_mode and module.params['update'] == 'merge': if module.params['before']:
load_config(module, commands) commands[:0] = module.params['before']
if module.params['save']: if module.params['after']:
cmd = {'command': 'copy runing-config startup-config', 'prompt': WARNING_PROMPTS_RE, 'answer': 'yes'} commands.extend(module.params['after'])
run_commands(module, [cmd])
result['saved'] = True
if not module.check_mode and module.params['update'] == 'merge':
load_config(module, commands)
result['changed'] = True
result['commands'] = commands
result['updates'] = commands
if module.params['save']:
result['changed'] = True result['changed'] = True
if not module.check_mode:
result['updates'] = commands cmd = {r'command': 'copy running-config startup-config',
r'prompt': r'\[confirm yes/no\]:\s?$', 'answer': 'yes'}
run_commands(module, [cmd])
result['saved'] = True
else:
module.warn('Skipping command `copy running-config startup-config`'
'due to check_mode. Configuration not copied to '
'non-volatile storage')
module.exit_json(**result) module.exit_json(**result)

View file

@ -23,16 +23,17 @@ description:
- Collects a base set of device facts from a remote device that - Collects a base set of device facts from a remote device that
is running OS10. This module prepends all of the is running OS10. This module prepends all of the
base network fact keys with C(ansible_net_<fact>). The facts base network fact keys with C(ansible_net_<fact>). The facts
module always collects a base set of facts from the device module will always collect a base set of facts from the device
and can enable or disable collection of additional facts. and can enable or disable collection of additional facts.
extends_documentation_fragment: dellos10 extends_documentation_fragment: dellos10
options: options:
gather_subset: gather_subset:
description: description:
- When supplied, this argument restricts the facts collected - When supplied, this argument will restrict the facts collected
to a given subset. Possible values for this argument include to a given subset. Possible values for this argument include
all, hardware, config, and interfaces. You can specify a list of all, hardware, config, and interfaces. Can specify a list of
values to include a larger subset. You can also use values with an initial M(!) to specify that a specific subset should values to include a larger subset. Values can also be used
with an initial C(M(!)) to specify that a specific subset should
not be collected. not be collected.
required: false required: false
default: '!config' default: '!config'
@ -56,8 +57,8 @@ EXAMPLES = """
RETURN = """ RETURN = """
ansible_net_gather_subset: ansible_net_gather_subset:
description: The list of fact subsets collected from the device. description: The list of fact subsets collected from the device
returned: Always. returned: always
type: list type: list
# default # default
@ -66,58 +67,58 @@ ansible_net_name:
returned: Always. returned: Always.
type: str type: str
ansible_net_version: ansible_net_version:
description: The operating system version running on the remote device. description: The operating system version running on the remote device
returned: Always. returned: always
type: str type: str
ansible_net_servicetag: ansible_net_servicetag:
description: The service tag number of the remote device. description: The service tag number of the remote device.
returned: Always. returned: always
type: str type: str
ansible_net_model: ansible_net_model:
description: The model name returned from the device. description: The model name returned from the device.
returned: Always. returned: always
type: str type: str
ansible_net_hostname: ansible_net_hostname:
description: The configured hostname of the device. description: The configured hostname of the device
returned: Always. returned: always
type: str type: str
# hardware # hardware
ansible_net_cpu_arch: ansible_net_cpu_arch:
description: CPU Architecture of the remote device. description: CPU Architecture of the remote device.
returned: When hardware is configured. returned: when hardware is configured
type: str type: str
ansible_net_memfree_mb: ansible_net_memfree_mb:
description: The available free memory on the remote device in MB. description: The available free memory on the remote device in Mb
returned: When hardware is configured. returned: when hardware is configured
type: int type: int
ansible_net_memtotal_mb: ansible_net_memtotal_mb:
description: The total memory on the remote device in MB. description: The total memory on the remote device in Mb
returned: When hardware is configured. returned: when hardware is configured
type: int type: int
# config # config
ansible_net_config: ansible_net_config:
description: The current active config from the device. description: The current active config from the device
returned: When config is configured. returned: when config is configured
type: str type: str
# interfaces # interfaces
ansible_net_all_ipv4_addresses: ansible_net_all_ipv4_addresses:
description: All IPv4 addresses configured on the device. description: All IPv4 addresses configured on the device
returned: When interfaces is configured returned: when interfaces is configured
type: list type: list
ansible_net_all_ipv6_addresses: ansible_net_all_ipv6_addresses:
description: All IPv6 addresses configured on the device. description: All IPv6 addresses configured on the device
returned: When interfaces is configured. returned: when interfaces is configured
type: list type: list
ansible_net_interfaces: ansible_net_interfaces:
description: A hash of all interfaces running on the system. description: A hash of all interfaces running on the system
returned: When interfaces is configured. returned: when interfaces is configured
type: dict type: dict
ansible_net_neighbors: ansible_net_neighbors:
description: The list of LLDP neighbors from the remote device. description: The list of LLDP neighbors from the remote device
returned: When interfaces is configured. returned: when interfaces is configured
type: dict type: dict
""" """
@ -212,7 +213,7 @@ class Hardware(FactsBase):
COMMANDS = [ COMMANDS = [
'show version | display-xml', 'show version | display-xml',
'show processes node-id 1 | grep "Mem:"' 'show processes node-id 1 | grep Mem:'
] ]
def populate(self): def populate(self):

View file

@ -1,7 +1,7 @@
# #
# (c) 2016 Red Hat Inc. # (c) 2016 Red Hat Inc.
# #
# Copyright (c) 2017 Dell Inc. # (c) 2017 Dell EMC.
# #
# This file is part of Ansible # This file is part of Ansible
# #
@ -28,8 +28,8 @@ from ansible import constants as C
from ansible.module_utils._text import to_text from ansible.module_utils._text import to_text
from ansible.module_utils.connection import Connection from ansible.module_utils.connection import Connection
from ansible.plugins.action.normal import ActionModule as _ActionModule from ansible.plugins.action.normal import ActionModule as _ActionModule
from ansible.module_utils.network.dellos10.dellos10 import dellos10_provider_spec
from ansible.module_utils.network.common.utils import load_provider from ansible.module_utils.network.common.utils import load_provider
from ansible.module_utils.network.dellos10.dellos10 import dellos10_provider_spec
try: try:
from __main__ import display from __main__ import display
@ -41,40 +41,45 @@ except ImportError:
class ActionModule(_ActionModule): class ActionModule(_ActionModule):
def run(self, tmp=None, task_vars=None): def run(self, tmp=None, task_vars=None):
socket_path = None
if self._play_context.connection != 'local': if self._play_context.connection == 'network_cli':
return dict( provider = self._task.args.get('provider', {})
failed=True, if any(provider.values()):
msg='invalid connection specified, expected connection=local, ' display.warning('provider is unnecessary when using network_cli and will be ignored')
'got %s' % self._play_context.connection elif self._play_context.connection == 'local':
) provider = load_provider(dellos10_provider_spec, self._task.args)
pc = copy.deepcopy(self._play_context)
pc.connection = 'network_cli'
pc.network_os = 'dellos10'
pc.remote_addr = provider['host'] or self._play_context.remote_addr
pc.port = int(provider['port'] or self._play_context.port or 22)
pc.remote_user = provider['username'] or self._play_context.connection_user
pc.password = provider['password'] or self._play_context.password
pc.private_key_file = provider['ssh_keyfile'] or self._play_context.private_key_file
pc.timeout = int(provider['timeout'] or C.PERSISTENT_COMMAND_TIMEOUT)
pc.become = provider['authorize'] or False
if pc.become:
pc.become_method = 'enable'
pc.become_pass = provider['auth_pass']
provider = load_provider(dellos10_provider_spec, self._task.args) display.vvv('using connection plugin %s' % pc.connection, pc.remote_addr)
connection = self._shared_loader_obj.connection_loader.get('persistent', pc, sys.stdin)
pc = copy.deepcopy(self._play_context) socket_path = connection.run()
pc.connection = 'network_cli' display.vvvv('socket_path: %s' % socket_path, pc.remote_addr)
pc.network_os = 'dellos10' if not socket_path:
pc.remote_addr = provider['host'] or self._play_context.remote_addr return {'failed': True,
pc.port = int(provider['port'] or self._play_context.port or 22) 'msg': 'unable to open shell. Please see: ' +
pc.remote_user = provider['username'] or self._play_context.connection_user 'https://docs.ansible.com/ansible/network_debug_troubleshooting.html#unable-to-open-shell'}
pc.password = provider['password'] or self._play_context.password
pc.private_key_file = provider['ssh_keyfile'] or self._play_context.private_key_file
pc.timeout = int(provider['timeout'] or C.PERSISTENT_COMMAND_TIMEOUT)
pc.become = provider['authorize'] or False
pc.become_pass = provider['auth_pass']
display.vvv('using connection plugin %s (was local)' % pc.connection, pc.remote_addr) task_vars['ansible_socket'] = socket_path
connection = self._shared_loader_obj.connection_loader.get('persistent', pc, sys.stdin)
socket_path = connection.run()
display.vvvv('socket_path: %s' % socket_path, pc.remote_addr)
if not socket_path:
return {'failed': True,
'msg': 'unable to open shell. Please see: ' +
'https://docs.ansible.com/ansible/network_debug_troubleshooting.html#unable-to-open-shell'}
# make sure we are in the right cli context which should be # make sure we are in the right cli context which should be
# enable mode and not config module # enable mode and not config module
if socket_path is None:
socket_path = self._connection.socket_path
conn = Connection(socket_path) conn = Connection(socket_path)
out = conn.get_prompt() out = conn.get_prompt()
while to_text(out, errors='surrogate_then_replace').strip().endswith(')#'): while to_text(out, errors='surrogate_then_replace').strip().endswith(')#'):
@ -82,11 +87,5 @@ class ActionModule(_ActionModule):
conn.send_command('exit') conn.send_command('exit')
out = conn.get_prompt() out = conn.get_prompt()
task_vars['ansible_socket'] = socket_path
if self._play_context.become_method == 'enable':
self._play_context.become = False
self._play_context.become_method = None
result = super(ActionModule, self).run(tmp, task_vars) result = super(ActionModule, self).run(tmp, task_vars)
return result return result

View file

@ -0,0 +1,82 @@
#
# (c) 2017 Red Hat Inc.
#
# (c) 2017 Dell EMC.
#
# This file is part of Ansible
#
# Ansible is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
#
# Ansible is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with Ansible. If not, see <http://www.gnu.org/licenses/>.
#
from __future__ import (absolute_import, division, print_function)
__metaclass__ = type
import re
import json
from itertools import chain
from ansible.module_utils._text import to_bytes, to_text
from ansible.module_utils.network.common.utils import to_list
from ansible.plugins.cliconf import CliconfBase, enable_mode
class Cliconf(CliconfBase):
def get_device_info(self):
device_info = {}
device_info['network_os'] = 'dellos10'
reply = self.get(b'show version')
data = to_text(reply, errors='surrogate_or_strict').strip()
match = re.search(r'OS Version (\S+)', data)
if match:
device_info['network_os_version'] = match.group(1)
match = re.search(r'System Type (\S+)', data, re.M)
if match:
device_info['network_os_model'] = match.group(1)
reply = self.get(b'show running-configuration | grep hostname')
data = to_text(reply, errors='surrogate_or_strict').strip()
match = re.search(r'^hostname (.+)', data, re.M)
if match:
device_info['network_os_hostname'] = match.group(1)
return device_info
@enable_mode
def get_config(self, source='running'):
if source not in ('running', 'startup'):
return self.invalid_params("fetching configuration from %s is not supported" % source)
if source == 'running':
cmd = b'show running-config all'
else:
cmd = b'show startup-config'
return self.send_command(cmd)
@enable_mode
def edit_config(self, command):
for cmd in chain(['configure terminal'], to_list(command), ['end']):
self.send_command(to_bytes(cmd))
def get(self, command, prompt=None, answer=None, sendonly=False):
return self.send_command(command, prompt=prompt, answer=answer, sendonly=sendonly)
def get_capabilities(self):
result = {}
result['rpc'] = self.get_base_rpc()
result['network_api'] = 'cliconf'
result['device_info'] = self.get_device_info()
return json.dumps(result)

8
test/integration/dellos10.yaml Normal file → Executable file
View file

@ -5,9 +5,9 @@
vars: vars:
limit_to: "*" limit_to: "*"
debug: false test_items: ""
roles: roles:
- { role: dellos10_command, when: "limit_to in ['*', 'dellos10_command']" } - { role: test_dellos10_command, when: "limit_to in ['*', 'dellos10_command']" }
- { role: dellos10_config, when: "limit_to in ['*', 'dellos10_config']" } - { role: test_dellos10_config, when: "limit_to in ['*', 'dellos10_config']" }
- { role: dellos10_facts, when: "limit_to in ['*', 'dellos10_facts']" } - { role: test_dellos10_facts, when: "limit_to in ['*', 'dellos10_facts']" }

View file

@ -0,0 +1,6 @@
---
cli:
host: "{{ ansible_host }}"
username: "{{ dellos10_cli_user | default('admin') }}"
password: "{{ dellos10_cli_pass | default('admin') }}"
transport: cli

View file

@ -0,0 +1,2 @@
---
testcase: "*"

View file

@ -0,0 +1,14 @@
---
- name: collect all cli test cases
find:
paths: "{{ role_path }}/tests/cli"
patterns: "{{ testcase }}.yaml"
register: test_cases
- name: set test_items
set_fact:
test_items: "{{ test_cases.files | map(attribute='path') | list }}"
- name: run test case
include: "{{ item }}"
with_items: "{{ test_items }}"

View file

@ -0,0 +1,2 @@
---
- { include: cli.yaml, tags: ['cli'] }

View file

@ -0,0 +1,20 @@
---
- debug: msg="START cli/bad_operator.yaml"
- name: test bad operator
dellos10_command:
commands:
- show version
- show interface ethernet 1/1/1
wait_for:
- "result[0] contains 'Description : blah'"
provider: "{{ cli }}"
register: result
ignore_errors: yes
- assert:
that:
- "result.failed == true"
- "result.msg is defined"
- debug: msg="END cli/bad_operator.yaml"

View file

@ -0,0 +1,20 @@
---
- debug: msg="START cli/contains.yaml"
- name: test contains operator
dellos10_command:
commands:
- show version
- show interface ethernet 1/1/1
wait_for:
- "result[0] contains OS10-Premium"
- "result[1] contains Ethernet "
provider: "{{ cli }}"
register: result
- assert:
that:
- "result.changed == false"
- "result.stdout is defined"
- debug: msg="END cli/contains.yaml"

View file

@ -0,0 +1,28 @@
---
- debug: msg="START cli/invalid.yaml"
- name: run invalid command
dellos10_command:
commands: ['show foo']
provider: "{{ cli }}"
register: result
ignore_errors: yes
- assert:
that:
- "'Error: Unrecognized command' in result.stdout"
- name: run commands that include invalid command
dellos10_command:
commands:
- show version
- show foo
provider: "{{ cli }}"
register: result
ignore_errors: yes
- assert:
that:
- "'Error: Unrecognized command' in result.stdout"
- debug: msg="END cli/invalid.yaml"

View file

@ -0,0 +1,29 @@
---
- debug: msg="START cli/output.yaml"
- name: get output for single command
dellos10_command:
commands: ['show version']
provider: "{{ cli }}"
register: result
- assert:
that:
- "result.changed == false"
- "result.stdout is defined"
- name: get output for multiple commands
dellos10_command:
commands:
- show version
- show interface Eth 1/1/1
provider: "{{ cli }}"
register: result
- assert:
that:
- "result.changed == false"
- "result.stdout is defined"
- "result.stdout | length == 2"
- debug: msg="END cli/output.yaml"

View file

@ -0,0 +1,19 @@
---
- debug: msg="START cli/timeout.yaml"
- name: test bad condition
dellos10_command:
commands:
- show version
wait_for:
- "result[0] contains bad_value_string"
provider: "{{ cli }}"
register: result
ignore_errors: yes
- assert:
that:
- "result.failed == true"
- "result.msg is defined"
- debug: msg="END cli/timeout.yaml"

View file

@ -0,0 +1,2 @@
---
testcase: "*"

View file

@ -0,0 +1,13 @@
---
- name: collect all cli test cases
find:
paths: "{{ role_path }}/tests/cli"
patterns: "{{ testcase }}.yaml"
register: test_cases
- name: set test_items
set_fact: test_items="{{ test_cases.files | map(attribute='path') | list }}"
- name: run test case
include: "{{ item }}"
with_items: "{{ test_items }}"

View file

@ -0,0 +1,2 @@
---
- { include: cli.yaml, tags: ['cli'] }

View file

@ -0,0 +1,4 @@
interface loopback999
shutdown
description basic

View file

@ -0,0 +1,3 @@
interface loopback999
no shutdown
description default

View file

@ -0,0 +1,58 @@
---
- debug: msg="START cli/backup.yaml"
- name: setup
dellos10_config:
commands:
- interface loopback 999
- no interface loopback 999
match: none
provider: "{{ cli }}"
ignore_errors: yes
- name: collect any backup files
find:
paths: "{{ role_path }}/backup"
pattern: "{{ inventory_hostname }}_config*"
register: backup_files
delegate_to: localhost
- name: delete backup files
file:
path: "{{ backupitem.path }}"
state: absent
with_items: "{{ backup_files.files }}"
loop_control:
loop_var: backupitem
- name: configure device with config
dellos10_config:
src: basic/config.j2
backup: yes
provider: "{{ cli }}"
register: result
- assert:
that:
- "result.changed == true"
- "result.updates is defined"
- name: collect any backup files
find:
paths: "{{ role_path }}/backup"
pattern: "{{ inventory_hostname }}_config*"
register: backup_files
delegate_to: localhost
- assert:
that:
- "backup_files.files is defined"
- name: teardown
dellos10_config:
commands:
- no interface loopback999
match: none
provider: "{{ cli }}"
- debug: msg="END cli/backup.yaml"

View file

@ -0,0 +1,42 @@
---
- debug: msg="START cli/basic.yaml"
- name: setup
dellos10_config:
commands:
- interface loopback 999
- no interface loopback 999
match: none
provider: "{{ cli }}"
ignore_errors: yes
- name: configure device with config
dellos10_config:
src: basic/config.j2
provider: "{{ cli }}"
register: result
- assert:
that:
- "result.changed == true"
- "result.updates is defined"
- name: check device with config
dellos10_config:
src: basic/config.j2
provider: "{{ cli }}"
register: result
- assert:
that:
- "result.changed == false"
- "result.updates is defined"
- name: teardown
dellos10_config:
commands:
- no interface loopback999
match: none
provider: "{{ cli }}"
- debug: msg="END cli/basic.yaml"

View file

@ -0,0 +1,46 @@
---
- debug: msg="START cli/defaults.yaml"
- name: setup
dellos10_config:
commands:
- interface loopback 999
- no interface loopback 999
match: none
provider: "{{ cli }}"
ignore_errors: yes
- name: configure device with defaults included
dellos10_config:
src: defaults/config.j2
provider: "{{ cli }}"
register: result
- debug: var=result
- assert:
that:
- "result.changed == true"
- "result.updates is defined"
- name: check device with defaults included
dellos10_config:
src: defaults/config.j2
provider: "{{ cli }}"
register: result
- debug: var=result
- assert:
that:
- "result.changed == false"
- "result.updates is defined"
- name: teardown
dellos10_config:
commands:
- no interface loopback999
match: none
provider: "{{ cli }}"
- debug: msg="END cli/defaults.yaml"

View file

@ -0,0 +1,44 @@
---
- debug: msg="START cli/force.yaml"
- name: setup
dellos10_config:
commands:
- interface loopback 999
- no interface loopback 999
match: none
provider: "{{ cli }}"
ignore_errors: yes
- name: configure device with config
dellos10_config:
src: basic/config.j2
provider: "{{ cli }}"
match: none
register: result
- assert:
that:
- "result.changed == true"
- "result.updates is defined"
- name: check device with config
dellos10_config:
src: basic/config.j2
provider: "{{ cli }}"
match: none
register: result
- assert:
that:
- "result.changed == true"
- "result.updates is defined"
- name: teardown
dellos10_config:
commands:
- no interface loopback999
match: none
provider: "{{ cli }}"
- debug: msg="END cli/force.yaml"

View file

@ -0,0 +1,42 @@
---
- debug: msg="START cli/sublevel.yaml"
- name: setup test
dellos10_config:
lines:
- 'no ip access-list test'
provider: "{{ cli }}"
match: none
- name: configure sub level command
dellos10_config:
lines: ['seq 5 permit ip any any count byte']
parents: ['ip access-list test']
provider: "{{ cli }}"
register: result
- assert:
that:
- "result.changed == true"
- "'ip access-list test' in result.updates"
- "'seq 5 permit ip any any count byte' in result.updates"
- name: configure sub level command idempotent check
dellos10_config:
lines: ['seq 5 permit ip any any count byte']
parents: ['ip access-list test']
provider: "{{ cli }}"
register: result
- assert:
that:
- "result.changed == false"
- name: teardown
dellos10_config:
lines:
- 'no ip access-list test'
provider: "{{ cli }}"
match: none
- debug: msg="END cli/sublevel.yaml"

View file

@ -0,0 +1,62 @@
---
- debug: msg="START cli/sublevel_block.yaml"
- name: setup
dellos10_config:
lines:
- seq 5 permit ip host 1.1.1.1 any count byte
- seq 10 permit ip host 2.2.2.2 any count byte
- seq 15 permit ip host 3.3.3.3 any count byte
parents: ['ip access-list test']
before: ['no ip access-list test']
after: ['exit']
provider: "{{ cli }}"
match: none
- name: configure sub level command using block resplace
dellos10_config:
lines:
- seq 5 permit ip host 1.1.1.1 any count byte
- seq 10 permit ip host 2.2.2.2 any count byte
- seq 15 permit ip host 3.3.3.3 any count byte
- seq 20 permit ip host 4.4.4.4 any count byte
parents: ['ip access-list test']
replace: block
after: ['exit']
provider: "{{ cli }}"
register: result
- assert:
that:
- "result.changed == true"
- "'ip access-list test' in result.updates"
- "'seq 5 permit ip host 1.1.1.1 any count byte' in result.updates"
- "'seq 10 permit ip host 2.2.2.2 any count byte' in result.updates"
- "'seq 15 permit ip host 3.3.3.3 any count byte' in result.updates"
- "'seq 20 permit ip host 4.4.4.4 any count byte' in result.updates"
- name: check sub level command using block replace
dellos10_config:
lines:
- seq 5 permit ip host 1.1.1.1 any count byte
- seq 10 permit ip host 2.2.2.2 any count byte
- seq 15 permit ip host 3.3.3.3 any count byte
- seq 20 permit ip host 4.4.4.4 any count byte
parents: ['ip access-list test']
replace: block
after: ['exit']
provider: "{{ cli }}"
register: result
- assert:
that:
- "result.changed == false"
- name: teardown
dellos10_config:
lines:
- no ip access-list test
match: none
provider: "{{ cli }}"
- debug: msg="END cli/sublevel_block.yaml"

View file

@ -0,0 +1,66 @@
---
- debug: msg="START cli/sublevel_exact.yaml"
- name: setup
dellos10_config:
lines:
- seq 5 permit ip host 1.1.1.1 any count byte
- seq 10 permit ip host 2.2.2.2 any count byte
- seq 15 permit ip host 3.3.3.3 any count byte
- seq 20 permit ip host 4.4.4.4 any count byte
- seq 25 permit ip host 5.5.5.5 any count byte
parents: ['ip access-list test']
before: ['no ip access-list test']
after: ['exit']
provider: "{{ cli }}"
match: none
- name: configure sub level command using exact match
dellos10_config:
lines:
- seq 5 permit ip host 1.1.1.1 any count byte
- seq 10 permit ip host 2.2.2.2 any count byte
- seq 15 permit ip host 3.3.3.3 any count byte
- seq 20 permit ip host 4.4.4.4 any count byte
parents: ['ip access-list test']
after: ['exit']
match: exact
provider: "{{ cli }}"
register: result
- assert:
that:
- "result.changed == true"
- "'ip access-list test' in result.updates"
- "'seq 5 permit ip host 1.1.1.1 any count byte' in result.updates"
- "'seq 10 permit ip host 2.2.2.2 any count byte' in result.updates"
- "'seq 15 permit ip host 3.3.3.3 any count byte' in result.updates"
- "'seq 20 permit ip host 4.4.4.4 any count byte' in result.updates"
- "'seq 25 permit ip host 5.5.5.5 any count byte' not in result.updates"
- name: check sub level command using exact match
dellos10_config:
lines:
- seq 5 permit ip host 1.1.1.1 any count byte
- seq 10 permit ip host 2.2.2.2 any count byte
- seq 15 permit ip host 3.3.3.3 any count byte
- seq 20 permit ip host 4.4.4.4 any count byte
- seq 25 permit ip host 5.5.5.5 any count byte
parents: ['ip access-list test']
after: ['exit']
match: exact
provider: "{{ cli }}"
register: result
- assert:
that:
- "result.changed == false"
- name: teardown
dellos10_config:
lines:
- no ip access-list test
provider: "{{ cli }}"
match: none
- debug: msg="END cli/sublevel_exact.yaml"

View file

@ -0,0 +1,63 @@
---
- debug: msg="START cli/sublevel_strict.yaml"
- name: setup
dellos10_config:
lines:
- seq 5 permit ip host 1.1.1.1 any count byte
- seq 10 permit ip host 2.2.2.2 any count byte
- seq 15 permit ip host 3.3.3.3 any count byte
- seq 20 permit ip host 4.4.4.4 any count byte
- seq 25 permit ip host 5.5.5.5 any count byte
parents: ['ip access-list test']
before: ['no ip access-list test']
after: ['exit']
provider: "{{ cli }}"
match: none
- name: configure sub level command using strict match
dellos10_config:
lines:
- seq 5 permit ip host 1.1.1.1 any count byte
- seq 10 permit ip host 2.2.2.2 any count byte
- seq 15 permit ip host 3.3.3.3 any count byte
- seq 20 permit ip host 4.4.4.4 any count byte
parents: ['ip access-list test']
match: strict
provider: "{{ cli }}"
register: result
- assert:
that:
- "result.changed == false"
- name: check sub level command using strict match
dellos10_config:
lines:
- seq 5 permit ip host 1.1.1.1 any count byte
- seq 15 permit ip host 3.3.3.3 any count byte
- seq 10 permit ip host 2.2.2.2 any count byte
parents: ['ip access-list test']
after: ['exit']
match: strict
provider: "{{ cli }}"
register: result
- assert:
that:
- "result.changed == true"
- "'ip access-list test' in result.updates"
- "'seq 5 permit ip host 1.1.1.1 any count byte' not in result.updates"
- "'seq 10 permit ip host 2.2.2.2 any count byte' in result.updates"
- "'seq 15 permit ip host 3.3.3.3 any count byte' in result.updates"
- "'seq 20 permit ip host 4.4.4.4 any count byte' not in result.updates"
- "'seq 25 permit ip host 5.5.5.5 any count byte' not in result.updates"
- name: teardown
dellos10_config:
lines:
- no ip access-list test
provider: "{{ cli }}"
match: none
- debug: msg="END cli/sublevel_strict.yaml"

View file

@ -0,0 +1,37 @@
---
- debug: msg="START cli/toplevel.yaml"
- name: setup
dellos10_config:
lines: ['hostname {{ inventory_hostname }}']
provider: "{{ cli }}"
match: none
- name: configure top level command
dellos10_config:
lines: ['hostname foo']
provider: "{{ cli }}"
register: result
- assert:
that:
- "result.changed == true"
- "'hostname foo' in result.updates"
- name: configure top level command idempotent check
dellos10_config:
lines: ['hostname foo']
provider: "{{ cli }}"
register: result
- assert:
that:
- "result.changed == false"
- name: teardown
dellos10_config:
lines: ['hostname {{ inventory_hostname }}']
provider: "{{ cli }}"
match: none
- debug: msg="END cli/toplevel.yaml"

View file

@ -0,0 +1,44 @@
---
- debug: msg="START cli/toplevel_after.yaml"
- name: setup
dellos10_config:
lines:
- "snmp-server contact ansible"
- "hostname {{ inventory_hostname }}"
provider: "{{ cli }}"
match: none
- name: configure top level command with before
dellos10_config:
lines: ['hostname foo']
after: ['snmp-server contact bar']
provider: "{{ cli }}"
register: result
- assert:
that:
- "result.changed == true"
- "'hostname foo' in result.updates"
- "'snmp-server contact bar' in result.updates"
- name: configure top level command with before idempotent check
dellos10_config:
lines: ['hostname foo']
after: ['snmp-server contact foo']
provider: "{{ cli }}"
register: result
- assert:
that:
- "result.changed == false"
- name: teardown
dellos10_config:
lines:
- "no snmp-server contact"
- "hostname {{ inventory_hostname }}"
provider: "{{ cli }}"
match: none
- debug: msg="END cli/toplevel_after.yaml"

View file

@ -0,0 +1,44 @@
---
- debug: msg="START cli/toplevel_before.yaml"
- name: setup
dellos10_config:
lines:
- "snmp-server contact ansible"
- "hostname {{ inventory_hostname }}"
provider: "{{ cli }}"
match: none
- name: configure top level command with before
dellos10_config:
lines: ['hostname foo']
before: ['snmp-server contact bar']
provider: "{{ cli }}"
register: result
- assert:
that:
- "result.changed == true"
- "'hostname foo' in result.updates"
- "'snmp-server contact bar' in result.updates"
- name: configure top level command with before idempotent check
dellos10_config:
lines: ['hostname foo']
before: ['snmp-server contact foo']
provider: "{{ cli }}"
register: result
- assert:
that:
- "result.changed == false"
- name: teardown
dellos10_config:
lines:
- "no snmp-server contact"
- "hostname {{ inventory_hostname }}"
provider: "{{ cli }}"
match: none
- debug: msg="END cli/toplevel_before.yaml"

View file

@ -0,0 +1,39 @@
---
- debug: msg="START cli/toplevel_nonidempotent.yaml"
- name: setup
dellos10_config:
lines: ['hostname {{ inventory_hostname }}']
provider: "{{ cli }}"
match: none
- name: configure top level command
dellos10_config:
lines: ['hostname foo']
provider: "{{ cli }}"
match: strict
register: result
- assert:
that:
- "result.changed == true"
- "'hostname foo' in result.updates"
- name: configure top level command idempotent check
dellos10_config:
lines: ['hostname foo']
provider: "{{ cli }}"
match: strict
register: result
- assert:
that:
- "result.changed == false"
- name: teardown
dellos10_config:
lines: ['hostname {{ inventory_hostname }}']
provider: "{{ cli }}"
match: none
- debug: msg="END cli/toplevel_nonidempotent.yaml"

View file

@ -0,0 +1,2 @@
---
testcase: "*"

View file

@ -0,0 +1,14 @@
---
- name: collect all cli test cases
find:
paths: "{{ role_path }}/tests/cli"
patterns: "{{ testcase }}.yaml"
register: test_cases
- name: set test_items
set_fact:
test_items: "{{ test_cases.files | map(attribute='path') | list }}"
- name: run test case
include: "{{ item }}"
with_items: "{{ test_items }}"

View file

@ -0,0 +1,2 @@
---
- { include: cli.yaml, tags: ['cli'] }

View file

@ -0,0 +1,48 @@
---
- debug: msg="START cli/facts.yaml"
- name: test all facts
dellos10_facts:
gather_subset:
- all
provider: "{{ cli }}"
register: result
- assert:
that:
- "result.changed == false"
- "result.ansible_facts is defined"
- "result.ansible_facts.ansible_net_interfaces is defined"
- "result.ansible_facts.ansible_net_memfree_mb is defined"
- "result.ansible_facts.ansible_net_model is defined"
- "result.ansible_facts.ansible_net_servicetag is defined"
- "result.ansible_facts.ansible_net_version is defined"
- name: test all facts except hardware
dellos10_facts:
gather_subset:
- "!hardware"
provider: "{{ cli }}"
register: result
- assert:
that:
- "result.changed == false"
- "result.ansible_facts.ansible_net_interfaces is defined"
- "result.ansible_facts.ansible_net_memfree_mb is not defined"
- name: test interface facts
dellos10_facts:
gather_subset:
- interfaces
provider: "{{ cli }}"
register: result
- assert:
that:
- "result.changed == false"
- "result.ansible_facts.ansible_net_interfaces is defined"
- "result.ansible_facts.ansible_net_memfree_mb is not defined"
- debug: msg="END cli/facts.yaml"

View file

@ -0,0 +1,90 @@
# (c) 2016 Red Hat Inc.
#
# (c) 2017 Dell EMC.
#
# This file is part of Ansible
#
# Ansible is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
#
# Ansible is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with Ansible. If not, see <http://www.gnu.org/licenses/>.
# Make coding more python3-ish
from __future__ import (absolute_import, division, print_function)
__metaclass__ = type
import os
import json
from units.modules.utils import AnsibleExitJson, AnsibleFailJson, ModuleTestCase
fixture_path = os.path.join(os.path.dirname(__file__), 'fixtures')
fixture_data = {}
def load_fixture(name):
path = os.path.join(fixture_path, name)
if path in fixture_data:
return fixture_data[path]
with open(path) as f:
data = f.read()
try:
data = json.loads(data)
except:
pass
fixture_data[path] = data
return data
class TestDellos10Module(ModuleTestCase):
def execute_module(self, failed=False, changed=False, commands=None, sort=True, defaults=False):
self.load_fixtures(commands)
if failed:
result = self.failed()
self.assertTrue(result['failed'], result)
else:
result = self.changed(changed)
self.assertEqual(result['changed'], changed, result)
if commands is not None:
if sort:
self.assertEqual(sorted(commands), sorted(result['updates']), result['updates'])
else:
self.assertEqual(commands, result['updates'], result['updates'])
return result
def failed(self):
with self.assertRaises(AnsibleFailJson) as exc:
self.module.main()
result = exc.exception.args[0]
self.assertTrue(result['failed'], result)
return result
def changed(self, changed=False):
with self.assertRaises(AnsibleExitJson) as exc:
self.module.main()
result = exc.exception.args[0]
self.assertEqual(result['changed'], changed, result)
return result
def load_fixtures(self, commands=None):
pass

View file

@ -0,0 +1,13 @@
!
hostname router
!
interface ethernet1/1/2
ip address 1.2.3.4/24
description test string
!
interface ethernet1/1/3
ip address 6.7.8.9/24
description test string
shutdown
!

View file

@ -0,0 +1,12 @@
!
hostname foo
!
interface ethernet1/1/2
no ip address
!
interface ethernet1/1/3
ip address 6.7.8.9/24
description test string
shutdown
!

File diff suppressed because it is too large Load diff

View file

@ -0,0 +1,855 @@
<?xml version="1.0" encoding="UTF-8"?>
<rpc-reply>
<bulk>
<data>
<interface>
<name>ethernet1/1/1</name>
<type>ianaift:ethernetCsmacd</type>
<admin-status>up</admin-status>
<oper-status>up</oper-status>
<if-index>17305068</if-index>
<phys-address>14:18:77:09:ae:01</phys-address>
<speed>40000000000</speed>
<auto-negotiation>true</auto-negotiation>
<supported-speed>40GIGE</supported-speed>
<supported-autoneg>BOTH_SUPPORTED</supported-autoneg>
<fec>not-supported</fec>
<npu-speed>0MBPS</npu-speed>
<current-phys-address>14:18:77:09:ae:01</current-phys-address>
<last-change-time>44</last-change-time>
<last-counter-clear>17570800</last-counter-clear>
<load-interval>30</load-interval>
<mtu>1532</mtu>
<eee-state>n/a</eee-state>
<lldp-rem-neighbor-info>
<info>
<rem-lldp-time-mark>330300</rem-lldp-time-mark>
<rem-lldp-index>4</rem-lldp-index>
<dest-mac-addr-index>1</dest-mac-addr-index>
<rem-if-index>17305068</rem-if-index>
<rem-local-port-num>260</rem-local-port-num>
<rem-lldp-chassis-id>FBh3Ca4A
</rem-lldp-chassis-id>
<rem-lldp-port-id>ZXRoZXJuZXQxLzEvMw==
</rem-lldp-port-id>
<rem-lldp-chassis-id-subtype>mac-address</rem-lldp-chassis-id-subtype>
<rem-lldp-port-subtype>interface-alias</rem-lldp-port-subtype>
<rem-ttl>120</rem-ttl>
<rem-last-update-time>172395</rem-last-update-time>
<rem-info-valid-time>107</rem-info-valid-time>
<rem-system-desc>OS10</rem-system-desc>
<rem-port-desc>ethernet1/1/3</rem-port-desc>
<rem-system-name>os10</rem-system-name>
<rem-port-vlan-id>1</rem-port-vlan-id>
<rem-max-frame-size>1532</rem-max-frame-size>
<rem-agg-link-status>false</rem-agg-link-status>
<rem-sys-cap-supported>router bridge repeater</rem-sys-cap-supported>
<rem-sys-cap-enabled>router bridge repeater</rem-sys-cap-enabled>
<rem-remote-changes>true</rem-remote-changes>
<rem-too-many-neighbors>false</rem-too-many-neighbors>
<rem-dot3-auto-neg-supported>true</rem-dot3-auto-neg-supported>
<rem-dot3-auto-neg-enabled>true</rem-dot3-auto-neg-enabled>
<rem-dot3-auto-neg-adv-cap>b-1000base-t</rem-dot3-auto-neg-adv-cap>
</info>
</lldp-rem-neighbor-info>
</interface>
<interface>
<name>ethernet1/1/2</name>
<type>ianaift:ethernetCsmacd</type>
<admin-status>up</admin-status>
<oper-status>up</oper-status>
<if-index>17305094</if-index>
<phys-address>14:18:77:09:ae:05</phys-address>
<speed>40000000000</speed>
<auto-negotiation>true</auto-negotiation>
<supported-speed>40GIGE</supported-speed>
<supported-autoneg>BOTH_SUPPORTED</supported-autoneg>
<fec>not-supported</fec>
<npu-speed>0MBPS</npu-speed>
<current-phys-address>14:18:77:09:ae:05</current-phys-address>
<last-change-time>44</last-change-time>
<last-counter-clear>17570700</last-counter-clear>
<load-interval>30</load-interval>
<mtu>1532</mtu>
<eee-state>n/a</eee-state>
<lldp-rem-neighbor-info>
<info>
<rem-lldp-time-mark>330300</rem-lldp-time-mark>
<rem-lldp-index>5</rem-lldp-index>
<dest-mac-addr-index>1</dest-mac-addr-index>
<rem-if-index>17305094</rem-if-index>
<rem-local-port-num>264</rem-local-port-num>
<rem-lldp-chassis-id>FBh3Ca4A
</rem-lldp-chassis-id>
<rem-lldp-port-id>ZXRoZXJuZXQxLzEvNA==
</rem-lldp-port-id>
<rem-lldp-chassis-id-subtype>mac-address</rem-lldp-chassis-id-subtype>
<rem-lldp-port-subtype>interface-alias</rem-lldp-port-subtype>
<rem-ttl>120</rem-ttl>
<rem-last-update-time>172395</rem-last-update-time>
<rem-info-valid-time>107</rem-info-valid-time>
<rem-system-desc>OS10</rem-system-desc>
<rem-port-desc>ethernet1/1/4</rem-port-desc>
<rem-system-name>os10</rem-system-name>
<rem-port-vlan-id>1</rem-port-vlan-id>
<rem-max-frame-size>1532</rem-max-frame-size>
<rem-agg-link-status>false</rem-agg-link-status>
<rem-sys-cap-supported>router bridge repeater</rem-sys-cap-supported>
<rem-sys-cap-enabled>router bridge repeater</rem-sys-cap-enabled>
<rem-remote-changes>true</rem-remote-changes>
<rem-too-many-neighbors>false</rem-too-many-neighbors>
<rem-dot3-auto-neg-supported>true</rem-dot3-auto-neg-supported>
<rem-dot3-auto-neg-enabled>true</rem-dot3-auto-neg-enabled>
<rem-dot3-auto-neg-adv-cap>b-1000base-t</rem-dot3-auto-neg-adv-cap>
</info>
</lldp-rem-neighbor-info>
</interface>
<interface>
<name>ethernet1/1/3</name>
<type>ianaift:ethernetCsmacd</type>
<admin-status>up</admin-status>
<oper-status>up</oper-status>
<if-index>17305120</if-index>
<phys-address>14:18:77:09:ae:09</phys-address>
<speed>40000000000</speed>
<auto-negotiation>true</auto-negotiation>
<supported-speed>40GIGE</supported-speed>
<supported-autoneg>BOTH_SUPPORTED</supported-autoneg>
<fec>not-supported</fec>
<npu-speed>0MBPS</npu-speed>
<current-phys-address>14:18:77:09:ae:09</current-phys-address>
<last-change-time>44</last-change-time>
<last-counter-clear>17570700</last-counter-clear>
<load-interval>30</load-interval>
<mtu>1532</mtu>
<eee-state>n/a</eee-state>
<lldp-rem-neighbor-info>
<info>
<rem-lldp-time-mark>330300</rem-lldp-time-mark>
<rem-lldp-index>2</rem-lldp-index>
<dest-mac-addr-index>1</dest-mac-addr-index>
<rem-if-index>17305120</rem-if-index>
<rem-local-port-num>268</rem-local-port-num>
<rem-lldp-chassis-id>FBh3Ca4A
</rem-lldp-chassis-id>
<rem-lldp-port-id>ZXRoZXJuZXQxLzEvMQ==
</rem-lldp-port-id>
<rem-lldp-chassis-id-subtype>mac-address</rem-lldp-chassis-id-subtype>
<rem-lldp-port-subtype>interface-alias</rem-lldp-port-subtype>
<rem-ttl>120</rem-ttl>
<rem-last-update-time>172395</rem-last-update-time>
<rem-info-valid-time>107</rem-info-valid-time>
<rem-system-desc>OS10</rem-system-desc>
<rem-port-desc>ethernet1/1/1</rem-port-desc>
<rem-system-name>os10</rem-system-name>
<rem-port-vlan-id>1</rem-port-vlan-id>
<rem-max-frame-size>1532</rem-max-frame-size>
<rem-agg-link-status>false</rem-agg-link-status>
<rem-sys-cap-supported>router bridge repeater</rem-sys-cap-supported>
<rem-sys-cap-enabled>router bridge repeater</rem-sys-cap-enabled>
<rem-remote-changes>true</rem-remote-changes>
<rem-too-many-neighbors>false</rem-too-many-neighbors>
<rem-dot3-auto-neg-supported>true</rem-dot3-auto-neg-supported>
<rem-dot3-auto-neg-enabled>true</rem-dot3-auto-neg-enabled>
<rem-dot3-auto-neg-adv-cap>b-1000base-t</rem-dot3-auto-neg-adv-cap>
</info>
</lldp-rem-neighbor-info>
</interface>
<interface>
<name>ethernet1/1/4</name>
<type>ianaift:ethernetCsmacd</type>
<admin-status>up</admin-status>
<oper-status>up</oper-status>
<if-index>17305146</if-index>
<phys-address>14:18:77:09:ae:0d</phys-address>
<speed>40000000000</speed>
<auto-negotiation>true</auto-negotiation>
<supported-speed>40GIGE</supported-speed>
<supported-autoneg>BOTH_SUPPORTED</supported-autoneg>
<fec>not-supported</fec>
<npu-speed>0MBPS</npu-speed>
<current-phys-address>14:18:77:09:ae:0d</current-phys-address>
<last-change-time>44</last-change-time>
<last-counter-clear>17570700</last-counter-clear>
<load-interval>30</load-interval>
<mtu>1532</mtu>
<eee-state>n/a</eee-state>
<lldp-rem-neighbor-info>
<info>
<rem-lldp-time-mark>330300</rem-lldp-time-mark>
<rem-lldp-index>3</rem-lldp-index>
<dest-mac-addr-index>1</dest-mac-addr-index>
<rem-if-index>17305146</rem-if-index>
<rem-local-port-num>272</rem-local-port-num>
<rem-lldp-chassis-id>FBh3Ca4A
</rem-lldp-chassis-id>
<rem-lldp-port-id>ZXRoZXJuZXQxLzEvMg==
</rem-lldp-port-id>
<rem-lldp-chassis-id-subtype>mac-address</rem-lldp-chassis-id-subtype>
<rem-lldp-port-subtype>interface-alias</rem-lldp-port-subtype>
<rem-ttl>120</rem-ttl>
<rem-last-update-time>172395</rem-last-update-time>
<rem-info-valid-time>107</rem-info-valid-time>
<rem-system-desc>OS10</rem-system-desc>
<rem-port-desc>ethernet1/1/2</rem-port-desc>
<rem-system-name>os10</rem-system-name>
<rem-port-vlan-id>1</rem-port-vlan-id>
<rem-max-frame-size>1532</rem-max-frame-size>
<rem-agg-link-status>false</rem-agg-link-status>
<rem-sys-cap-supported>router bridge repeater</rem-sys-cap-supported>
<rem-sys-cap-enabled>router bridge repeater</rem-sys-cap-enabled>
<rem-remote-changes>true</rem-remote-changes>
<rem-too-many-neighbors>false</rem-too-many-neighbors>
<rem-dot3-auto-neg-supported>true</rem-dot3-auto-neg-supported>
<rem-dot3-auto-neg-enabled>true</rem-dot3-auto-neg-enabled>
<rem-dot3-auto-neg-adv-cap>b-1000base-t</rem-dot3-auto-neg-adv-cap>
</info>
</lldp-rem-neighbor-info>
</interface>
<interface>
<name>ethernet1/1/5</name>
<type>ianaift:ethernetCsmacd</type>
<admin-status>up</admin-status>
<oper-status>down</oper-status>
<if-index>17305172</if-index>
<phys-address>14:18:77:09:ae:11</phys-address>
<speed>0</speed>
<auto-negotiation>false</auto-negotiation>
<supported-speed>40GIGE</supported-speed>
<supported-autoneg>BOTH_SUPPORTED</supported-autoneg>
<fec>not-supported</fec>
<npu-speed>0MBPS</npu-speed>
<current-phys-address>14:18:77:09:ae:11</current-phys-address>
<last-change-time>36</last-change-time>
<last-counter-clear>17570700</last-counter-clear>
<load-interval>30</load-interval>
<mtu>1532</mtu>
<eee-state>n/a</eee-state>
<lldp-rem-neighbor-info/>
</interface>
<interface>
<name>ethernet1/1/6</name>
<type>ianaift:ethernetCsmacd</type>
<admin-status>up</admin-status>
<oper-status>down</oper-status>
<if-index>17305198</if-index>
<phys-address>14:18:77:09:ae:15</phys-address>
<speed>0</speed>
<auto-negotiation>false</auto-negotiation>
<supported-speed>40GIGE</supported-speed>
<supported-autoneg>BOTH_SUPPORTED</supported-autoneg>
<fec>not-supported</fec>
<npu-speed>0MBPS</npu-speed>
<current-phys-address>14:18:77:09:ae:15</current-phys-address>
<last-change-time>36</last-change-time>
<last-counter-clear>17570700</last-counter-clear>
<load-interval>30</load-interval>
<mtu>1532</mtu>
<eee-state>n/a</eee-state>
<lldp-rem-neighbor-info/>
</interface>
<interface>
<name>ethernet1/1/7</name>
<type>ianaift:ethernetCsmacd</type>
<admin-status>up</admin-status>
<oper-status>down</oper-status>
<if-index>17305224</if-index>
<phys-address>14:18:77:09:ae:19</phys-address>
<speed>0</speed>
<auto-negotiation>false</auto-negotiation>
<supported-speed>40GIGE</supported-speed>
<supported-autoneg>BOTH_SUPPORTED</supported-autoneg>
<fec>not-supported</fec>
<npu-speed>0MBPS</npu-speed>
<current-phys-address>14:18:77:09:ae:19</current-phys-address>
<last-change-time>36</last-change-time>
<last-counter-clear>17570700</last-counter-clear>
<load-interval>30</load-interval>
<mtu>1532</mtu>
<eee-state>n/a</eee-state>
<lldp-rem-neighbor-info/>
</interface>
<interface>
<name>ethernet1/1/8</name>
<type>ianaift:ethernetCsmacd</type>
<admin-status>up</admin-status>
<oper-status>down</oper-status>
<if-index>17305250</if-index>
<phys-address>14:18:77:09:ae:1d</phys-address>
<speed>0</speed>
<auto-negotiation>false</auto-negotiation>
<supported-speed>40GIGE</supported-speed>
<supported-autoneg>BOTH_SUPPORTED</supported-autoneg>
<fec>not-supported</fec>
<npu-speed>0MBPS</npu-speed>
<current-phys-address>14:18:77:09:ae:1d</current-phys-address>
<last-change-time>36</last-change-time>
<last-counter-clear>17570700</last-counter-clear>
<load-interval>30</load-interval>
<mtu>1532</mtu>
<eee-state>n/a</eee-state>
<lldp-rem-neighbor-info/>
</interface>
<interface>
<name>ethernet1/1/9</name>
<type>ianaift:ethernetCsmacd</type>
<admin-status>up</admin-status>
<oper-status>down</oper-status>
<if-index>17305276</if-index>
<phys-address>14:18:77:09:ae:21</phys-address>
<speed>0</speed>
<auto-negotiation>false</auto-negotiation>
<supported-speed>40GIGE</supported-speed>
<supported-autoneg>BOTH_SUPPORTED</supported-autoneg>
<fec>not-supported</fec>
<npu-speed>0MBPS</npu-speed>
<current-phys-address>14:18:77:09:ae:21</current-phys-address>
<last-change-time>36</last-change-time>
<last-counter-clear>17570700</last-counter-clear>
<load-interval>30</load-interval>
<mtu>1532</mtu>
<eee-state>n/a</eee-state>
<lldp-rem-neighbor-info/>
</interface>
<interface>
<name>ethernet1/1/10</name>
<type>ianaift:ethernetCsmacd</type>
<admin-status>up</admin-status>
<oper-status>down</oper-status>
<if-index>17305302</if-index>
<phys-address>14:18:77:09:ae:25</phys-address>
<speed>0</speed>
<auto-negotiation>false</auto-negotiation>
<supported-speed>40GIGE</supported-speed>
<supported-autoneg>BOTH_SUPPORTED</supported-autoneg>
<fec>not-supported</fec>
<npu-speed>0MBPS</npu-speed>
<current-phys-address>14:18:77:09:ae:25</current-phys-address>
<last-change-time>36</last-change-time>
<last-counter-clear>17570700</last-counter-clear>
<load-interval>30</load-interval>
<mtu>1532</mtu>
<eee-state>n/a</eee-state>
<lldp-rem-neighbor-info/>
</interface>
<interface>
<name>ethernet1/1/11</name>
<type>ianaift:ethernetCsmacd</type>
<admin-status>up</admin-status>
<oper-status>down</oper-status>
<if-index>17305328</if-index>
<phys-address>14:18:77:09:ae:29</phys-address>
<speed>0</speed>
<auto-negotiation>false</auto-negotiation>
<supported-speed>40GIGE</supported-speed>
<supported-autoneg>BOTH_SUPPORTED</supported-autoneg>
<fec>not-supported</fec>
<npu-speed>0MBPS</npu-speed>
<current-phys-address>14:18:77:09:ae:29</current-phys-address>
<last-change-time>37</last-change-time>
<last-counter-clear>17570600</last-counter-clear>
<load-interval>30</load-interval>
<mtu>1532</mtu>
<eee-state>n/a</eee-state>
<lldp-rem-neighbor-info/>
</interface>
<interface>
<name>ethernet1/1/12</name>
<type>ianaift:ethernetCsmacd</type>
<admin-status>up</admin-status>
<oper-status>down</oper-status>
<if-index>17305354</if-index>
<phys-address>14:18:77:09:ae:2d</phys-address>
<speed>0</speed>
<auto-negotiation>false</auto-negotiation>
<supported-speed>40GIGE</supported-speed>
<supported-autoneg>BOTH_SUPPORTED</supported-autoneg>
<fec>not-supported</fec>
<npu-speed>0MBPS</npu-speed>
<current-phys-address>14:18:77:09:ae:2d</current-phys-address>
<last-change-time>37</last-change-time>
<last-counter-clear>17570600</last-counter-clear>
<load-interval>30</load-interval>
<mtu>1532</mtu>
<eee-state>n/a</eee-state>
<lldp-rem-neighbor-info/>
</interface>
<interface>
<name>ethernet1/1/13</name>
<type>ianaift:ethernetCsmacd</type>
<admin-status>up</admin-status>
<oper-status>down</oper-status>
<if-index>17305380</if-index>
<phys-address>14:18:77:09:ae:31</phys-address>
<speed>0</speed>
<auto-negotiation>false</auto-negotiation>
<supported-speed>40GIGE</supported-speed>
<supported-autoneg>BOTH_SUPPORTED</supported-autoneg>
<fec>not-supported</fec>
<npu-speed>0MBPS</npu-speed>
<current-phys-address>14:18:77:09:ae:31</current-phys-address>
<last-change-time>37</last-change-time>
<last-counter-clear>17570600</last-counter-clear>
<load-interval>30</load-interval>
<mtu>1532</mtu>
<eee-state>n/a</eee-state>
<lldp-rem-neighbor-info/>
</interface>
<interface>
<name>ethernet1/1/14</name>
<type>ianaift:ethernetCsmacd</type>
<admin-status>up</admin-status>
<oper-status>down</oper-status>
<if-index>17305406</if-index>
<phys-address>14:18:77:09:ae:32</phys-address>
<speed>0</speed>
<auto-negotiation>false</auto-negotiation>
<supported-speed>40GIGE</supported-speed>
<supported-autoneg>BOTH_SUPPORTED</supported-autoneg>
<fec>not-supported</fec>
<npu-speed>0MBPS</npu-speed>
<current-phys-address>14:18:77:09:ae:32</current-phys-address>
<last-change-time>37</last-change-time>
<last-counter-clear>17570600</last-counter-clear>
<load-interval>30</load-interval>
<mtu>1532</mtu>
<eee-state>n/a</eee-state>
<lldp-rem-neighbor-info/>
</interface>
<interface>
<name>ethernet1/1/15</name>
<type>ianaift:ethernetCsmacd</type>
<admin-status>up</admin-status>
<oper-status>down</oper-status>
<if-index>17305432</if-index>
<phys-address>14:18:77:09:ae:33</phys-address>
<speed>0</speed>
<auto-negotiation>false</auto-negotiation>
<supported-speed>40GIGE</supported-speed>
<supported-autoneg>BOTH_SUPPORTED</supported-autoneg>
<fec>not-supported</fec>
<npu-speed>0MBPS</npu-speed>
<current-phys-address>14:18:77:09:ae:33</current-phys-address>
<last-change-time>37</last-change-time>
<last-counter-clear>17570600</last-counter-clear>
<load-interval>30</load-interval>
<mtu>1532</mtu>
<eee-state>n/a</eee-state>
<lldp-rem-neighbor-info/>
</interface>
<interface>
<name>ethernet1/1/16</name>
<type>ianaift:ethernetCsmacd</type>
<admin-status>up</admin-status>
<oper-status>down</oper-status>
<if-index>17305458</if-index>
<phys-address>14:18:77:09:ae:34</phys-address>
<speed>0</speed>
<auto-negotiation>false</auto-negotiation>
<supported-speed>40GIGE</supported-speed>
<supported-autoneg>BOTH_SUPPORTED</supported-autoneg>
<fec>not-supported</fec>
<npu-speed>0MBPS</npu-speed>
<current-phys-address>14:18:77:09:ae:34</current-phys-address>
<last-change-time>37</last-change-time>
<last-counter-clear>17570600</last-counter-clear>
<load-interval>30</load-interval>
<mtu>1532</mtu>
<eee-state>n/a</eee-state>
<lldp-rem-neighbor-info/>
</interface>
<interface>
<name>ethernet1/1/17</name>
<type>ianaift:ethernetCsmacd</type>
<admin-status>up</admin-status>
<oper-status>down</oper-status>
<if-index>17305484</if-index>
<phys-address>14:18:77:09:ae:35</phys-address>
<speed>0</speed>
<auto-negotiation>false</auto-negotiation>
<supported-speed>40GIGE</supported-speed>
<supported-autoneg>BOTH_SUPPORTED</supported-autoneg>
<fec>not-supported</fec>
<npu-speed>0MBPS</npu-speed>
<current-phys-address>14:18:77:09:ae:35</current-phys-address>
<last-change-time>37</last-change-time>
<last-counter-clear>17570600</last-counter-clear>
<load-interval>30</load-interval>
<mtu>1532</mtu>
<eee-state>n/a</eee-state>
<lldp-rem-neighbor-info/>
</interface>
<interface>
<name>ethernet1/1/18</name>
<type>ianaift:ethernetCsmacd</type>
<admin-status>up</admin-status>
<oper-status>down</oper-status>
<if-index>17305510</if-index>
<phys-address>14:18:77:09:ae:39</phys-address>
<speed>0</speed>
<auto-negotiation>false</auto-negotiation>
<supported-speed>40GIGE</supported-speed>
<supported-autoneg>BOTH_SUPPORTED</supported-autoneg>
<fec>not-supported</fec>
<npu-speed>0MBPS</npu-speed>
<current-phys-address>14:18:77:09:ae:39</current-phys-address>
<last-change-time>37</last-change-time>
<last-counter-clear>17570600</last-counter-clear>
<load-interval>30</load-interval>
<mtu>1532</mtu>
<eee-state>n/a</eee-state>
<lldp-rem-neighbor-info/>
</interface>
<interface>
<name>ethernet1/1/19</name>
<type>ianaift:ethernetCsmacd</type>
<admin-status>up</admin-status>
<oper-status>down</oper-status>
<if-index>17305536</if-index>
<phys-address>14:18:77:09:ae:3d</phys-address>
<speed>0</speed>
<auto-negotiation>false</auto-negotiation>
<supported-speed>40GIGE</supported-speed>
<supported-autoneg>BOTH_SUPPORTED</supported-autoneg>
<fec>not-supported</fec>
<npu-speed>0MBPS</npu-speed>
<current-phys-address>14:18:77:09:ae:3d</current-phys-address>
<last-change-time>37</last-change-time>
<last-counter-clear>17570600</last-counter-clear>
<load-interval>30</load-interval>
<mtu>1532</mtu>
<eee-state>n/a</eee-state>
<lldp-rem-neighbor-info/>
</interface>
<interface>
<name>ethernet1/1/20</name>
<type>ianaift:ethernetCsmacd</type>
<admin-status>up</admin-status>
<oper-status>down</oper-status>
<if-index>17305562</if-index>
<phys-address>14:18:77:09:ae:41</phys-address>
<speed>0</speed>
<auto-negotiation>false</auto-negotiation>
<supported-speed>40GIGE</supported-speed>
<supported-autoneg>BOTH_SUPPORTED</supported-autoneg>
<fec>not-supported</fec>
<npu-speed>0MBPS</npu-speed>
<current-phys-address>14:18:77:09:ae:41</current-phys-address>
<last-change-time>37</last-change-time>
<last-counter-clear>17570600</last-counter-clear>
<load-interval>30</load-interval>
<mtu>1532</mtu>
<eee-state>n/a</eee-state>
<lldp-rem-neighbor-info/>
</interface>
<interface>
<name>ethernet1/1/21</name>
<type>ianaift:ethernetCsmacd</type>
<admin-status>up</admin-status>
<oper-status>down</oper-status>
<if-index>17305588</if-index>
<phys-address>14:18:77:09:ae:45</phys-address>
<speed>0</speed>
<auto-negotiation>false</auto-negotiation>
<supported-speed>40GIGE</supported-speed>
<supported-autoneg>BOTH_SUPPORTED</supported-autoneg>
<fec>not-supported</fec>
<npu-speed>0MBPS</npu-speed>
<current-phys-address>14:18:77:09:ae:45</current-phys-address>
<last-change-time>37</last-change-time>
<last-counter-clear>17570600</last-counter-clear>
<load-interval>30</load-interval>
<mtu>1532</mtu>
<eee-state>n/a</eee-state>
<lldp-rem-neighbor-info/>
</interface>
<interface>
<name>ethernet1/1/22</name>
<type>ianaift:ethernetCsmacd</type>
<admin-status>up</admin-status>
<oper-status>down</oper-status>
<if-index>17305614</if-index>
<phys-address>14:18:77:09:ae:49</phys-address>
<speed>0</speed>
<auto-negotiation>false</auto-negotiation>
<supported-speed>40GIGE</supported-speed>
<supported-autoneg>BOTH_SUPPORTED</supported-autoneg>
<fec>not-supported</fec>
<npu-speed>0MBPS</npu-speed>
<current-phys-address>14:18:77:09:ae:49</current-phys-address>
<last-change-time>37</last-change-time>
<last-counter-clear>17570600</last-counter-clear>
<load-interval>30</load-interval>
<mtu>1532</mtu>
<eee-state>n/a</eee-state>
<lldp-rem-neighbor-info/>
</interface>
<interface>
<name>ethernet1/1/23</name>
<type>ianaift:ethernetCsmacd</type>
<admin-status>up</admin-status>
<oper-status>down</oper-status>
<if-index>17305640</if-index>
<phys-address>14:18:77:09:ae:4d</phys-address>
<speed>0</speed>
<auto-negotiation>false</auto-negotiation>
<supported-speed>40GIGE</supported-speed>
<supported-autoneg>BOTH_SUPPORTED</supported-autoneg>
<fec>not-supported</fec>
<npu-speed>0MBPS</npu-speed>
<current-phys-address>14:18:77:09:ae:4d</current-phys-address>
<last-change-time>37</last-change-time>
<last-counter-clear>17570500</last-counter-clear>
<load-interval>30</load-interval>
<mtu>1532</mtu>
<eee-state>n/a</eee-state>
<lldp-rem-neighbor-info/>
</interface>
<interface>
<name>ethernet1/1/24</name>
<type>ianaift:ethernetCsmacd</type>
<admin-status>up</admin-status>
<oper-status>down</oper-status>
<if-index>17305666</if-index>
<phys-address>14:18:77:09:ae:51</phys-address>
<speed>0</speed>
<auto-negotiation>false</auto-negotiation>
<supported-speed>40GIGE</supported-speed>
<supported-autoneg>BOTH_SUPPORTED</supported-autoneg>
<fec>not-supported</fec>
<npu-speed>0MBPS</npu-speed>
<current-phys-address>14:18:77:09:ae:51</current-phys-address>
<last-change-time>38</last-change-time>
<last-counter-clear>17570500</last-counter-clear>
<load-interval>30</load-interval>
<mtu>1532</mtu>
<eee-state>n/a</eee-state>
<lldp-rem-neighbor-info/>
</interface>
<interface>
<name>ethernet1/1/25</name>
<type>ianaift:ethernetCsmacd</type>
<admin-status>up</admin-status>
<oper-status>down</oper-status>
<if-index>17305692</if-index>
<phys-address>14:18:77:09:ae:55</phys-address>
<speed>0</speed>
<auto-negotiation>false</auto-negotiation>
<supported-speed>40GIGE</supported-speed>
<supported-autoneg>BOTH_SUPPORTED</supported-autoneg>
<fec>not-supported</fec>
<npu-speed>0MBPS</npu-speed>
<current-phys-address>14:18:77:09:ae:55</current-phys-address>
<last-change-time>38</last-change-time>
<last-counter-clear>17570500</last-counter-clear>
<load-interval>30</load-interval>
<mtu>1532</mtu>
<eee-state>n/a</eee-state>
<lldp-rem-neighbor-info/>
</interface>
<interface>
<name>ethernet1/1/26</name>
<type>ianaift:ethernetCsmacd</type>
<admin-status>up</admin-status>
<oper-status>down</oper-status>
<if-index>17305718</if-index>
<phys-address>14:18:77:09:ae:59</phys-address>
<speed>0</speed>
<auto-negotiation>false</auto-negotiation>
<supported-speed>40GIGE</supported-speed>
<supported-autoneg>BOTH_SUPPORTED</supported-autoneg>
<fec>not-supported</fec>
<npu-speed>0MBPS</npu-speed>
<current-phys-address>14:18:77:09:ae:59</current-phys-address>
<last-change-time>38</last-change-time>
<last-counter-clear>17570500</last-counter-clear>
<load-interval>30</load-interval>
<mtu>1532</mtu>
<eee-state>n/a</eee-state>
<lldp-rem-neighbor-info/>
</interface>
<interface>
<name>ethernet1/1/27</name>
<type>ianaift:ethernetCsmacd</type>
<admin-status>up</admin-status>
<oper-status>down</oper-status>
<if-index>17305744</if-index>
<phys-address>14:18:77:09:ae:5d</phys-address>
<speed>0</speed>
<auto-negotiation>false</auto-negotiation>
<supported-speed>40GIGE</supported-speed>
<supported-autoneg>BOTH_SUPPORTED</supported-autoneg>
<fec>not-supported</fec>
<npu-speed>0MBPS</npu-speed>
<current-phys-address>14:18:77:09:ae:5d</current-phys-address>
<last-change-time>38</last-change-time>
<last-counter-clear>17570500</last-counter-clear>
<load-interval>30</load-interval>
<mtu>1532</mtu>
<eee-state>n/a</eee-state>
<lldp-rem-neighbor-info/>
</interface>
<interface>
<name>ethernet1/1/28</name>
<type>ianaift:ethernetCsmacd</type>
<admin-status>up</admin-status>
<oper-status>down</oper-status>
<if-index>17305770</if-index>
<phys-address>14:18:77:09:ae:61</phys-address>
<speed>0</speed>
<auto-negotiation>false</auto-negotiation>
<supported-speed>40GIGE</supported-speed>
<supported-autoneg>BOTH_SUPPORTED</supported-autoneg>
<fec>not-supported</fec>
<npu-speed>0MBPS</npu-speed>
<current-phys-address>14:18:77:09:ae:61</current-phys-address>
<last-change-time>38</last-change-time>
<last-counter-clear>17570500</last-counter-clear>
<load-interval>30</load-interval>
<mtu>1532</mtu>
<eee-state>n/a</eee-state>
<lldp-rem-neighbor-info/>
</interface>
<interface>
<name>ethernet1/1/29</name>
<type>ianaift:ethernetCsmacd</type>
<admin-status>up</admin-status>
<oper-status>down</oper-status>
<if-index>17305796</if-index>
<phys-address>14:18:77:09:ae:65</phys-address>
<speed>0</speed>
<auto-negotiation>false</auto-negotiation>
<supported-speed>40GIGE</supported-speed>
<supported-autoneg>BOTH_SUPPORTED</supported-autoneg>
<fec>not-supported</fec>
<npu-speed>0MBPS</npu-speed>
<current-phys-address>14:18:77:09:ae:65</current-phys-address>
<last-change-time>38</last-change-time>
<last-counter-clear>17570500</last-counter-clear>
<load-interval>30</load-interval>
<mtu>1532</mtu>
<eee-state>n/a</eee-state>
<lldp-rem-neighbor-info/>
</interface>
<interface>
<name>ethernet1/1/30</name>
<type>ianaift:ethernetCsmacd</type>
<admin-status>up</admin-status>
<oper-status>down</oper-status>
<if-index>17305822</if-index>
<phys-address>14:18:77:09:ae:66</phys-address>
<speed>0</speed>
<auto-negotiation>false</auto-negotiation>
<supported-speed>40GIGE</supported-speed>
<supported-autoneg>BOTH_SUPPORTED</supported-autoneg>
<fec>not-supported</fec>
<npu-speed>0MBPS</npu-speed>
<current-phys-address>14:18:77:09:ae:66</current-phys-address>
<last-change-time>38</last-change-time>
<last-counter-clear>17570500</last-counter-clear>
<load-interval>30</load-interval>
<mtu>1532</mtu>
<eee-state>n/a</eee-state>
<lldp-rem-neighbor-info/>
</interface>
<interface>
<name>ethernet1/1/31</name>
<type>ianaift:ethernetCsmacd</type>
<admin-status>up</admin-status>
<oper-status>down</oper-status>
<if-index>17305848</if-index>
<phys-address>14:18:77:09:ae:67</phys-address>
<speed>0</speed>
<auto-negotiation>false</auto-negotiation>
<supported-speed>40GIGE</supported-speed>
<supported-autoneg>BOTH_SUPPORTED</supported-autoneg>
<fec>not-supported</fec>
<npu-speed>0MBPS</npu-speed>
<current-phys-address>14:18:77:09:ae:67</current-phys-address>
<last-change-time>38</last-change-time>
<last-counter-clear>17570500</last-counter-clear>
<load-interval>30</load-interval>
<mtu>1532</mtu>
<eee-state>n/a</eee-state>
<lldp-rem-neighbor-info/>
</interface>
<interface>
<name>ethernet1/1/32</name>
<type>ianaift:ethernetCsmacd</type>
<admin-status>up</admin-status>
<oper-status>down</oper-status>
<if-index>17305874</if-index>
<phys-address>14:18:77:09:ae:68</phys-address>
<speed>0</speed>
<auto-negotiation>false</auto-negotiation>
<supported-speed>40GIGE</supported-speed>
<supported-autoneg>BOTH_SUPPORTED</supported-autoneg>
<fec>not-supported</fec>
<npu-speed>0MBPS</npu-speed>
<current-phys-address>14:18:77:09:ae:68</current-phys-address>
<last-change-time>38</last-change-time>
<last-counter-clear>17570500</last-counter-clear>
<load-interval>30</load-interval>
<mtu>1532</mtu>
<eee-state>n/a</eee-state>
<lldp-rem-neighbor-info/>
</interface>
<interface>
<name>mgmt1/1/1</name>
<type>base-if:management</type>
<admin-status>up</admin-status>
<oper-status>up</oper-status>
<if-index>35454736</if-index>
<phys-address>00:a0:c9:00:00:00</phys-address>
<speed>1000000000</speed>
<auto-negotiation>false</auto-negotiation>
<supported-speed>10MBPS</supported-speed>
<supported-speed>100MBPS</supported-speed>
<supported-speed>1GIGE</supported-speed>
<supported-autoneg>NOT_SUPPORTED</supported-autoneg>
<fec>not-supported</fec>
<bind-ni-name>default</bind-ni-name>
<current-phys-address>00:a0:c9:00:00:00</current-phys-address>
<last-change-time>38</last-change-time>
<last-counter-clear>17570400</last-counter-clear>
<load-interval>30</load-interval>
<mtu>1532</mtu>
<lldp-rem-neighbor-info>
<info>
<rem-lldp-time-mark>3100</rem-lldp-time-mark>
<rem-lldp-index>1</rem-lldp-index>
<dest-mac-addr-index>1</dest-mac-addr-index>
<rem-if-index>35454736</rem-if-index>
<rem-local-port-num>4</rem-local-port-num>
<rem-lldp-chassis-id>kLEc9C9t
</rem-lldp-chassis-id>
<rem-lldp-port-id>VGVuR2lnYWJpdEV0aGVybmV0IDAvMA==
</rem-lldp-port-id>
<rem-lldp-chassis-id-subtype>mac-address</rem-lldp-chassis-id-subtype>
<rem-lldp-port-subtype>interface-name</rem-lldp-port-subtype>
<rem-ttl>20</rem-ttl>
<rem-last-update-time>175667</rem-last-update-time>
<rem-info-valid-time>15</rem-info-valid-time>
<rem-system-desc>Dell Real Time Operating System Software. Dell Operating System Version: 2.0. Dell Application Software Version: 9.11(2.0) Copyright (c) 1999-2017Dell Inc. All Rights Reserved.Build Time: Tue Apr 25 21:22:59 2017</rem-system-desc>
<rem-port-desc>TenGigabitEthernet 0/0</rem-port-desc>
<rem-system-name>swlab1-maa-tor-A2</rem-system-name>
<rem-port-vlan-id>148</rem-port-vlan-id>
<rem-max-frame-size>0</rem-max-frame-size>
<rem-agg-link-status>false</rem-agg-link-status>
<rem-sys-cap-supported>router bridge repeater</rem-sys-cap-supported>
<rem-sys-cap-enabled>router bridge repeater</rem-sys-cap-enabled>
<rem-remote-changes>false</rem-remote-changes>
<rem-too-many-neighbors>false</rem-too-many-neighbors>
<rem-dot3-auto-neg-supported>false</rem-dot3-auto-neg-supported>
<rem-dot3-auto-neg-enabled>false</rem-dot3-auto-neg-enabled>
<rem-dot3-auto-neg-adv-cap/>
</info>
</lldp-rem-neighbor-info>
</interface>
</data>
<last-keys>
<name>mgmt1/1/1</name>
</last-keys>
</bulk>
</rpc-reply>

View file

@ -0,0 +1 @@
KiB Mem: 8127144 total, 2297272 used, 5829872 free, 137360 buffers

View file

@ -0,0 +1,252 @@
! Version 10.4.0E(R1)
! Last configuration change at Jan 11 12:26:08 2018
!
snmp-server contact http://www.dell.com/support
snmp-server host 1.1.1.1 traps version 1 c4 udp-port 5
snmp-server host 1.1.1.1 traps version 2c c1 udp-port 4
snmp-server host 2.2.2.2 traps version 1 c3 udp-port 162
ip community-list expanded commex deny aaa
ip community-list standard commstd deny internet
ip community-list standard commstd permit no-advertise
ip as-path access-list accesslist deny abc
ip as-path access-list accesslist deny www
ip extcommunity-list expanded extcommex deny aaa
ip extcommunity-list standard extcommstd deny rt 22:33
ip extcommunity-list standard extcommstd permit soo 22:33
hostname os10
interface breakout 1/1/1 map 40g-1x
interface breakout 1/1/2 map 40g-1x
interface breakout 1/1/3 map 40g-1x
interface breakout 1/1/4 map 40g-1x
interface breakout 1/1/5 map 40g-1x
interface breakout 1/1/6 map 40g-1x
interface breakout 1/1/7 map 40g-1x
interface breakout 1/1/8 map 40g-1x
interface breakout 1/1/9 map 40g-1x
interface breakout 1/1/10 map 40g-1x
interface breakout 1/1/11 map 40g-1x
interface breakout 1/1/12 map 40g-1x
interface breakout 1/1/13 map 40g-1x
interface breakout 1/1/14 map 40g-1x
interface breakout 1/1/15 map 40g-1x
interface breakout 1/1/16 map 40g-1x
interface breakout 1/1/17 map 40g-1x
interface breakout 1/1/18 map 40g-1x
interface breakout 1/1/19 map 40g-1x
interface breakout 1/1/20 map 40g-1x
interface breakout 1/1/21 map 40g-1x
interface breakout 1/1/22 map 40g-1x
interface breakout 1/1/23 map 40g-1x
interface breakout 1/1/24 map 40g-1x
interface breakout 1/1/25 map 40g-1x
interface breakout 1/1/26 map 40g-1x
interface breakout 1/1/27 map 40g-1x
interface breakout 1/1/28 map 40g-1x
interface breakout 1/1/29 map 40g-1x
interface breakout 1/1/30 map 40g-1x
interface breakout 1/1/31 map 40g-1x
interface breakout 1/1/32 map 40g-1x
username admin password $6$q9QBeYjZ$jfxzVqGhkxX3smxJSH9DDz7/3OJc6m5wjF8nnLD7/VKx8SloIhp4NoGZs0I/UNwh8WVuxwfd9q4pWIgNs5BKH. role sysadmin
aaa authentication local
iscsi target port 860
iscsi target port 3260
hash-algorithm ecmp xor
logging console disable
vrrp delay reload 5
vrrp version 3
spanning-tree mode rstp
!
interface vlan1
no shutdown
!
interface vlan100
no shutdown
!
interface port-channel12
no shutdown
switchport access vlan 1
vlt-port-channel 13
!
interface ethernet1/1/1
no shutdown
switchport access vlan 1
!
interface ethernet1/1/2
no shutdown
no switchport
!
interface ethernet1/1/3
no shutdown
switchport access vlan 1
!
interface ethernet1/1/4
no shutdown
switchport access vlan 1
!
interface ethernet1/1/5
no shutdown
switchport access vlan 1
!
interface ethernet1/1/6
no shutdown
switchport access vlan 1
!
interface ethernet1/1/7
no shutdown
switchport access vlan 1
!
interface ethernet1/1/8
no shutdown
no switchport
!
interface ethernet1/1/9
no shutdown
switchport access vlan 1
!
interface ethernet1/1/10
no shutdown
switchport access vlan 1
!
interface ethernet1/1/11
no shutdown
switchport access vlan 1
!
interface ethernet1/1/12
no shutdown
no switchport
!
interface ethernet1/1/13
no shutdown
no switchport
!
vrrp-group 4
priority 120
track 3 priority-cost 25
virtual-address 4.1.1.1
virtual-address 4.1.1.2
advertise-interval centisecs 200
no preempt
!
vrrp-ipv6-group 2
priority 120
track 3 priority-cost 25
virtual-address 3001:4828:5808:ffa3::9
virtual-address fe80::10
advertise-interval centisecs 200
no preempt
!
interface ethernet1/1/14
no shutdown
no switchport
!
interface ethernet1/1/15
no shutdown
no switchport
!
interface ethernet1/1/16
no shutdown
no switchport
!
interface ethernet1/1/17
no shutdown
no switchport
!
interface ethernet1/1/18
no shutdown
no switchport
!
interface ethernet1/1/19
no shutdown
no switchport
!
interface ethernet1/1/20
no shutdown
switchport access vlan 1
!
interface ethernet1/1/21
no shutdown
switchport access vlan 1
!
interface ethernet1/1/22
no shutdown
switchport access vlan 1
!
interface ethernet1/1/23
no shutdown
switchport access vlan 1
!
interface ethernet1/1/24
no shutdown
switchport access vlan 1
!
interface ethernet1/1/25
no shutdown
switchport access vlan 1
!
interface ethernet1/1/26
no shutdown
switchport access vlan 1
!
interface ethernet1/1/27
no shutdown
switchport access vlan 1
!
interface ethernet1/1/28
no shutdown
switchport access vlan 1
!
interface ethernet1/1/29
no shutdown
switchport access vlan 1
!
interface ethernet1/1/30
no shutdown
switchport access vlan 1
!
interface ethernet1/1/31
no shutdown
switchport access vlan 1
!
interface ethernet1/1/32
no shutdown
switchport access vlan 1
!
interface mgmt1/1/1
no shutdown
ip address 10.16.148.144/16
ipv6 address autoconfig
!
route-map test permit 1
match ip address prefix-list testprefix
match ip address testaccess
continue 20
set comm-list commstd delete
set comm-list commex add
set community internet
set extcommunity rt 22:33
set extcomm-list extcommstd delete
set extcomm-list extcommex add
set ip next-hop 10.1.1.1 track-id 3
set local-preference 1200
set metric + 30
set metric-type internal
set origin igp
set weight 50
!
route-map test deny 10
match ip address prefix-list testprefix
match ip address testaccess
set ip next-hop 10.1.1.1 track-id 3
!
support-assist
!
policy-map type application policy-iscsi
!
class-map type application class-iscsi
!
class-map type qos class-trust
!
vlt-domain 1
discovery-interface ethernet1/1/12
vlt-mac aa:aa:aa:aa:aa:aa

View file

@ -0,0 +1,194 @@
<?xml version="1.0" encoding="UTF-8"?>
<rpc-reply>
<data>
<system>
<node>
<node-id>1</node-id>
<node-mac>14:18:77:09:ae:00</node-mac>
<number-of-mac-addresses>384</number-of-mac-addresses>
<mfg-info>
<vendor-name>DELL</vendor-name>
<product-name>S6010-ON</product-name>
<hw-version>X01</hw-version>
<platform-name>x86_64-dell_s6010_c2538-r0</platform-name>
<ppid>0088</ppid>
<service-tag/>
<service-code/>
</mfg-info>
<unit>
<unit-id>1</unit-id>
<current-unit-model>S6010</current-unit-model>
<provisioned-unit-model>S6010</provisioned-unit-model>
<unit-state>up</unit-state>
<software-version>10.4.0E(R1)</software-version>
<port-info>32x40GbE</port-info>
<mfg-info>
<vendor-name>DELL</vendor-name>
<product-name>S6010-ON</product-name>
<hw-version>X01</hw-version>
<platform-name>x86_64-dell_s6010_c2538-r0</platform-name>
<ppid>0088</ppid>
<part-number>083R0P</part-number>
<service-tag/>
<service-code/>
</mfg-info>
<down-reason>user-triggered</down-reason>
<descr>S6010-ON 32x40GbE QSFP+ Interface Module</descr>
<beacon_led_state>false</beacon_led_state>
<system-identifier-id>1</system-identifier-id>
<firmware>
<firmware-name>BIOS</firmware-name>
<firmware-version>3.26.0.1</firmware-version>
</firmware>
<firmware>
<firmware-name>System CPLD</firmware-name>
<firmware-version>10</firmware-version>
</firmware>
<firmware>
<firmware-name>Master CPLD</firmware-name>
<firmware-version>9</firmware-version>
</firmware>
<firmware>
<firmware-name>Slave CPLD</firmware-name>
<firmware-version>4</firmware-version>
</firmware>
</unit>
<power-supply>
<psu-id>1</psu-id>
<status>fail</status>
<mfg-info/>
</power-supply>
<power-supply>
<psu-id>2</psu-id>
<status>up</status>
<power-type>UNKNOWN</power-type>
<fan-info>
<fan-id>1</fan-id>
<fan-status>fail</fan-status>
<fan-speed-rpm>1920</fan-speed-rpm>
</fan-info>
<air-flow>NORMAL</air-flow>
<mfg-info>
<vendor-name/>
<product-name/>
<hw-version/>
<platform-name/>
<ppid/>
<part-number/>
<service-tag/>
<service-code/>
</mfg-info>
</power-supply>
<fan-tray>
<fan-tray-id>1</fan-tray-id>
<status>up</status>
<fan-info>
<fan-id>1</fan-id>
<fan-status>up</fan-status>
<fan-speed-rpm>22090</fan-speed-rpm>
</fan-info>
<air-flow>NORMAL</air-flow>
<mfg-info>
<vendor-name/>
<product-name/>
<hw-version>F01</hw-version>
<platform-name/>
<ppid>CN123456FAN100589021</ppid>
<part-number>P1FAN1</part-number>
<service-tag/>
<service-code/>
</mfg-info>
</fan-tray>
<fan-tray>
<fan-tray-id>2</fan-tray-id>
<status>up</status>
<fan-info>
<fan-id>1</fan-id>
<fan-status>up</fan-status>
<fan-speed-rpm>22215</fan-speed-rpm>
</fan-info>
<air-flow>NORMAL</air-flow>
<mfg-info>
<vendor-name/>
<product-name/>
<hw-version>F02</hw-version>
<platform-name/>
<ppid>CN123456FAN200589031</ppid>
<part-number>P2FAN2</part-number>
<service-tag/>
<service-code/>
</mfg-info>
</fan-tray>
<fan-tray>
<fan-tray-id>3</fan-tray-id>
<status>up</status>
<fan-info>
<fan-id>1</fan-id>
<fan-status>up</fan-status>
<fan-speed-rpm>22215</fan-speed-rpm>
</fan-info>
<air-flow>NORMAL</air-flow>
<mfg-info>
<vendor-name/>
<product-name/>
<hw-version>F03</hw-version>
<platform-name/>
<ppid>CN123456FAN300589041</ppid>
<part-number>P3FAN3</part-number>
<service-tag/>
<service-code/>
</mfg-info>
</fan-tray>
<fan-tray>
<fan-tray-id>4</fan-tray-id>
<status>up</status>
<fan-info>
<fan-id>1</fan-id>
<fan-status>up</fan-status>
<fan-speed-rpm>22215</fan-speed-rpm>
</fan-info>
<air-flow>NORMAL</air-flow>
<mfg-info>
<vendor-name/>
<product-name/>
<hw-version>F04</hw-version>
<platform-name/>
<ppid>CN123456FAN400589051</ppid>
<part-number>P4FAN4</part-number>
<service-tag/>
<service-code/>
</mfg-info>
</fan-tray>
<fan-tray>
<fan-tray-id>5</fan-tray-id>
<status>up</status>
<fan-info>
<fan-id>1</fan-id>
<fan-status>up</fan-status>
<fan-speed-rpm>21724</fan-speed-rpm>
</fan-info>
<air-flow>NORMAL</air-flow>
<mfg-info>
<vendor-name/>
<product-name/>
<hw-version>F05</hw-version>
<platform-name/>
<ppid>CN123456FAN500589061</ppid>
<part-number>P5FAN5</part-number>
<service-tag/>
<service-code/>
</mfg-info>
</fan-tray>
</node>
</system>
<system-state>
<system-status>
<hostname>os10</hostname>
<uptime>161826</uptime>
<date-time>2018-01-12T13:42:36.20+00:00</date-time>
<boot-datetime>2018-01-10T16:45:30+00:00</boot-datetime>
</system-status>
</system-state>
</data>
</rpc-reply>

View file

@ -0,0 +1,9 @@
Dell EMC Networking OS10 Enterprise
Copyright (c) 1999-2017 by Dell Inc. All Rights Reserved.
OS Version: 10.4.0E(R1)
Build Version: 10.4.0E(R1.56)
Build Time: 2017-12-19T22:11:00-0800
System Type: S6000-VM
Architecture: x86_64
Up Time: 6 days 00:33:35

View file

@ -0,0 +1,27 @@
<?xml version="1.0" encoding="UTF-8"?>
<rpc-reply>
<data>
<system-state>
<system-status>
<hostname>os10</hostname>
<uptime>162698</uptime>
<date-time>2018-01-12T13:57:08.58+00:00</date-time>
<boot-datetime>2018-01-10T16:45:30+00:00</boot-datetime>
</system-status>
</system-state>
<system-sw-state>
<sw-version>
<sw-version>10.4.0E(R1)</sw-version>
<sw-name>Enterprise</sw-name>
<sw-name-long>Dell EMC Networking OS10 Enterprise</sw-name-long>
<sw-platform>S6010-ON</sw-platform>
<sw-platform-long>Dell EMC OS10 Enterprise Edition Blueprint 1.0.0</sw-platform-long>
<cpu-arch>x86_64</cpu-arch>
<sw-build-date>2017-12-14T23:39:27-0800</sw-build-date>
<sw-build-version>10.4.0E(R1.55)</sw-build-version>
<copyright>Copyright (c) 1999-2017 by Dell Inc. All Rights Reserved.</copyright>
</sw-version>
</system-sw-state>
</data>
</rpc-reply>

View file

@ -0,0 +1,110 @@
# (c) 2016 Red Hat Inc.
#
# (c) 2017 Dell EMC.
#
# This file is part of Ansible
#
# Ansible is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
#
# Ansible is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with Ansible. If not, see <http://www.gnu.org/licenses/>.
# Make coding more python3-ish
from __future__ import (absolute_import, division, print_function)
__metaclass__ = type
import json
from ansible.compat.tests.mock import patch
from ansible.modules.network.dellos10 import dellos10_command
from units.modules.utils import set_module_args
from .dellos10_module import TestDellos10Module, load_fixture
class TestDellos10CommandModule(TestDellos10Module):
module = dellos10_command
def setUp(self):
super(TestDellos10CommandModule, self).setUp()
self.mock_run_commands = patch('ansible.modules.network.dellos10.dellos10_command.run_commands')
self.run_commands = self.mock_run_commands.start()
def tearDown(self):
super(TestDellos10CommandModule, self).tearDown()
self.mock_run_commands.stop()
def load_fixtures(self, commands=None):
def load_from_file(*args, **kwargs):
module, commands = args
output = list()
for item in commands:
try:
obj = json.loads(item['command'])
command = obj['command']
except ValueError:
command = item['command']
filename = str(command).replace(' ', '_')
output.append(load_fixture(filename))
return output
self.run_commands.side_effect = load_from_file
def test_dellos10_command_simple(self):
set_module_args(dict(commands=['show version']))
result = self.execute_module()
self.assertEqual(len(result['stdout']), 1)
self.assertTrue(result['stdout'][0].startswith('Dell EMC Networking'))
def test_dellos10_command_multiple(self):
set_module_args(dict(commands=['show version', 'show version']))
result = self.execute_module()
self.assertEqual(len(result['stdout']), 2)
self.assertTrue(result['stdout'][0].startswith('Dell EMC Networking'))
def test_dellos10_command_wait_for(self):
wait_for = 'result[0] contains "Dell EMC"'
set_module_args(dict(commands=['show version'], wait_for=wait_for))
self.execute_module()
def test_dellos10_command_wait_for_fails(self):
wait_for = 'result[0] contains "test string"'
set_module_args(dict(commands=['show version'], wait_for=wait_for))
self.execute_module(failed=True)
self.assertEqual(self.run_commands.call_count, 10)
def test_dellos10_command_retries(self):
wait_for = 'result[0] contains "test string"'
set_module_args(dict(commands=['show version'], wait_for=wait_for, retries=2))
self.execute_module(failed=True)
self.assertEqual(self.run_commands.call_count, 2)
def test_dellos10_command_match_any(self):
wait_for = ['result[0] contains "Dell EMC"',
'result[0] contains "test string"']
set_module_args(dict(commands=['show version'], wait_for=wait_for, match='any'))
self.execute_module()
def test_dellos10_command_match_all(self):
wait_for = ['result[0] contains "Dell EMC"',
'result[0] contains "OS10 Enterprise"']
set_module_args(dict(commands=['show version'], wait_for=wait_for, match='all'))
self.execute_module()
def test_dellos10_command_match_all_failure(self):
wait_for = ['result[0] contains "Dell EMC"',
'result[0] contains "test string"']
commands = ['show version', 'show version']
set_module_args(dict(commands=commands, wait_for=wait_for, match='all'))
self.execute_module(failed=True)

View file

@ -0,0 +1,150 @@
#
# (c) 2016 Red Hat Inc.
#
# (c) 2017 Dell EMC.
#
# This file is part of Ansible
#
# Ansible is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
#
# Ansible is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with Ansible. If not, see <http://www.gnu.org/licenses/>.
# Make coding more python3-ish
from __future__ import (absolute_import, division, print_function)
__metaclass__ = type
from ansible.compat.tests.mock import patch
from ansible.modules.network.dellos10 import dellos10_config
from units.modules.utils import set_module_args
from .dellos10_module import TestDellos10Module, load_fixture
class TestDellos10ConfigModule(TestDellos10Module):
module = dellos10_config
def setUp(self):
super(TestDellos10ConfigModule, self).setUp()
self.mock_get_config = patch('ansible.modules.network.dellos10.dellos10_config.get_config')
self.get_config = self.mock_get_config.start()
self.mock_load_config = patch('ansible.modules.network.dellos10.dellos10_config.load_config')
self.load_config = self.mock_load_config.start()
self.mock_run_commands = patch('ansible.modules.network.dellos10.dellos10_config.run_commands')
self.run_commands = self.mock_run_commands.start()
def tearDown(self):
super(TestDellos10ConfigModule, self).tearDown()
self.mock_get_config.stop()
self.mock_load_config.stop()
self.mock_run_commands.stop()
def load_fixtures(self, commands=None):
config_file = 'dellos10_config_config.cfg'
self.get_config.return_value = load_fixture(config_file)
self.load_config.return_value = None
def test_dellos10_config_unchanged(self):
src = load_fixture('dellos10_config_config.cfg')
set_module_args(dict(src=src))
self.execute_module()
def test_dellos10_config_src(self):
src = load_fixture('dellos10_config_src.cfg')
set_module_args(dict(src=src))
commands = ['hostname foo', 'interface ethernet1/1/2',
'no ip address']
self.execute_module(changed=True, commands=commands)
def test_dellos10_config_backup(self):
set_module_args(dict(backup=True))
result = self.execute_module()
self.assertIn('__backup__', result)
def test_dellos10_config_save(self):
set_module_args(dict(save=True))
self.execute_module(changed=True)
self.assertEqual(self.run_commands.call_count, 1)
self.assertEqual(self.get_config.call_count, 0)
self.assertEqual(self.load_config.call_count, 0)
args = self.run_commands.call_args[0][1]
self.assertDictContainsSubset({'command': 'copy running-config startup-config'}, args[0])
# self.assertIn('copy running-config startup-config\r', args)
def test_dellos10_config_lines_wo_parents(self):
set_module_args(dict(lines=['hostname foo']))
commands = ['hostname foo']
self.execute_module(changed=True, commands=commands)
def test_dellos10_config_lines_w_parents(self):
set_module_args(dict(lines=['shutdown'], parents=['interface ethernet1/1/2']))
commands = ['interface ethernet1/1/2', 'shutdown']
self.execute_module(changed=True, commands=commands)
def test_dellos10_config_before(self):
set_module_args(dict(lines=['hostname foo'], before=['snmp-server contact bar']))
commands = ['snmp-server contact bar', 'hostname foo']
self.execute_module(changed=True, commands=commands, sort=False)
def test_dellos10_config_after(self):
set_module_args(dict(lines=['hostname foo'], after=['snmp-server contact bar']))
commands = ['hostname foo', 'snmp-server contact bar']
self.execute_module(changed=True, commands=commands, sort=False)
def test_dellos10_config_before_after_no_change(self):
set_module_args(dict(lines=['hostname router'],
before=['snmp-server contact bar'],
after=['snmp-server location chennai']))
self.execute_module()
def test_dellos10_config_config(self):
config = 'hostname localhost'
set_module_args(dict(lines=['hostname router'], config=config))
commands = ['hostname router']
self.execute_module(changed=True, commands=commands)
def test_dellos10_config_replace_block(self):
lines = ['description test string', 'test string']
parents = ['interface ethernet1/1/2']
set_module_args(dict(lines=lines, replace='block', parents=parents))
commands = parents + lines
self.execute_module(changed=True, commands=commands)
def test_dellos10_config_match_none(self):
lines = ['hostname router']
set_module_args(dict(lines=lines, match='none'))
self.execute_module(changed=True, commands=lines)
def test_dellos10_config_match_none(self):
lines = ['ip address 1.2.3.4/24', 'description test string']
parents = ['interface ethernet1/1/2']
set_module_args(dict(lines=lines, parents=parents, match='none'))
commands = parents + lines
self.execute_module(changed=True, commands=commands, sort=False)
def test_dellos10_config_match_strict(self):
lines = ['ip address 1.2.3.4/24', 'description test string',
'shutdown']
parents = ['interface ethernet1/1/2']
set_module_args(dict(lines=lines, parents=parents, match='strict'))
commands = parents + ['shutdown']
self.execute_module(changed=True, commands=commands, sort=False)
def test_dellos10_config_match_exact(self):
lines = ['ip address 1.2.3.4/24', 'description test string',
'shutdown']
parents = ['interface ethernet1/1/2']
set_module_args(dict(lines=lines, parents=parents, match='exact'))
commands = parents + lines
self.execute_module(changed=True, commands=commands, sort=False)

View file

@ -0,0 +1,109 @@
# (c) 2016 Red Hat Inc.
#
# (c) 2017 Dell EMC.
#
# This file is part of Ansible
#
# Ansible is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
#
# Ansible is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with Ansible. If not, see <http://www.gnu.org/licenses/>.
# Make coding more python3-ish
from __future__ import (absolute_import, division, print_function)
__metaclass__ = type
import json
from ansible.compat.tests.mock import patch
from units.modules.utils import set_module_args
from .dellos10_module import TestDellos10Module, load_fixture
from ansible.modules.network.dellos10 import dellos10_facts
class TestDellos10Facts(TestDellos10Module):
module = dellos10_facts
def setUp(self):
super(TestDellos10Facts, self).setUp()
self.mock_run_command = patch(
'ansible.modules.network.dellos10.dellos10_facts.run_commands')
self.run_command = self.mock_run_command.start()
def tearDown(self):
super(TestDellos10Facts, self).tearDown()
self.mock_run_command.stop()
def load_fixtures(self, commands=None):
def load_from_file(*args, **kwargs):
module, commands = args
output = list()
for item in commands:
try:
obj = json.loads(item)
command = obj['command']
except ValueError:
command = item
if '|' in command:
command = str(command).replace('|', '')
filename = str(command).replace(' ', '_')
filename = filename.replace('/', '7')
output.append(load_fixture(filename))
return output
self.run_command.side_effect = load_from_file
def test_dellos10_facts_gather_subset_default(self):
set_module_args(dict())
result = self.execute_module()
ansible_facts = result['ansible_facts']
self.assertIn('hardware', ansible_facts['ansible_net_gather_subset'])
self.assertIn('default', ansible_facts['ansible_net_gather_subset'])
self.assertIn('interfaces', ansible_facts['ansible_net_gather_subset'])
self.assertEquals('os10', ansible_facts['ansible_net_hostname'])
self.assertIn('ethernet1/1/8', ansible_facts['ansible_net_interfaces'].keys())
self.assertEquals(7936, ansible_facts['ansible_net_memtotal_mb'])
self.assertEquals(5693, ansible_facts['ansible_net_memfree_mb'])
def test_dellos10_facts_gather_subset_config(self):
set_module_args({'gather_subset': 'config'})
result = self.execute_module()
ansible_facts = result['ansible_facts']
self.assertIn('default', ansible_facts['ansible_net_gather_subset'])
self.assertIn('config', ansible_facts['ansible_net_gather_subset'])
self.assertEquals('os10', ansible_facts['ansible_net_hostname'])
self.assertIn('ansible_net_config', ansible_facts)
def test_dellos10_facts_gather_subset_hardware(self):
set_module_args({'gather_subset': 'hardware'})
result = self.execute_module()
ansible_facts = result['ansible_facts']
self.assertIn('default', ansible_facts['ansible_net_gather_subset'])
self.assertIn('hardware', ansible_facts['ansible_net_gather_subset'])
self.assertEquals('x86_64', ansible_facts['ansible_net_cpu_arch'])
self.assertEquals(7936, ansible_facts['ansible_net_memtotal_mb'])
self.assertEquals(5693, ansible_facts['ansible_net_memfree_mb'])
def test_dellos10_facts_gather_subset_interfaces(self):
set_module_args({'gather_subset': 'interfaces'})
result = self.execute_module()
ansible_facts = result['ansible_facts']
self.assertIn('default', ansible_facts['ansible_net_gather_subset'])
self.assertIn('interfaces', ansible_facts['ansible_net_gather_subset'])
self.assertIn('ethernet1/1/8', ansible_facts['ansible_net_interfaces'].keys())
self.assertEquals(sorted(['mgmt1/1/1', 'ethernet1/1/4', 'ethernet1/1/2', 'ethernet1/1/3', 'ethernet1/1/1']),
sorted(list(ansible_facts['ansible_net_neighbors'].keys())))
self.assertIn('ansible_net_interfaces', ansible_facts)