Added support for new Ansible Infra (network_cli plugin, cliconf, module utils cleanup and test) for dellos10 Support t (#34915)

* Support for network_cli plugin and tests

* Fixed ansible-test * issues

* Fixed Pylint warning

* Fixed the sanity test errors

* Fix YAMLlinter issue - removed blank spaces

* Fixed Python 3 failures

* Fixed the PEP8 issue

* Fix sanity --test validate-modules

* Reverted the changes to the doc fragments

lib/ansible/module_utils/network/dellos10/dellos10.py

@@ -124,8 +124,7 @@ def load_config(module, commands):
     for command in to_list(commands):
         if command == 'end':
             continue
-        cmd = {'command': command, 'prompt': WARNING_PROMPTS_RE, 'answer': 'yes'}
+        rc, out, err = exec_command(module, command)
-        rc, out, err = exec_command(module, module.jsonify(cmd))
         if rc != 0:
             module.fail_json(msg=to_text(err, errors='surrogate_or_strict'), command=command, rc=rc)
 

lib/ansible/modules/network/dellos10/dellos10_command.py

@@ -45,9 +45,22 @@ options:
         See examples.
     required: false
     default: null
+    version_added: "2.2"
+  match:
+    description:
+      - The I(match) argument is used in conjunction with the
+        I(wait_for) argument to specify the match policy.  Valid
+        values are C(all) or C(any).  If the value is set to C(all)
+        then all conditionals in the wait_for must be satisfied.  If
+        the value is set to C(any) then only one of the values must be
+        satisfied.
+    required: false
+    default: all
+    choices: ['any', 'all']
+    version_added: "2.5"
   retries:
     description:
-      - Specifies the number of retries a command should by tried
+      - Specifies the number of retries a command should be tried
         before it is considered failed. The command is run on the
         target device every retry and evaluated against the
         I(wait_for) conditions.
@@ -64,33 +77,21 @@ options:
 """
 
 EXAMPLES = """
-# Note: examples below use the following provider dict to handle
-#       transport and authentication to the node.
-vars:
-  cli:
-    host: "{{ inventory_hostname }}"
-    username: admin
-    password: admin
-    transport: cli
-
 tasks:
   - name: run show version on remote devices
     dellos10_command:
       commands: show version
-      provider: "{{ cli }}"
 
   - name: run show version and check to see if output contains OS10
     dellos10_command:
       commands: show version
       wait_for: result[0] contains OS10
-      provider: "{{ cli }}"
 
   - name: run multiple commands on remote nodes
     dellos10_command:
       commands:
         - show version
         - show interface
-      provider: "{{ cli }}"
 
   - name: run multiple commands and evaluate the output
     dellos10_command:
@@ -100,7 +101,6 @@ tasks:
       wait_for:
         - result[0] contains OS10
         - result[1] contains Ethernet
-      provider: "{{ cli }}"
 """
 
 RETURN = """
@@ -109,19 +109,16 @@ stdout:
   returned: always apart from low level errors (such as action plugin)
   type: list
   sample: ['...', '...']
-
 stdout_lines:
   description: The value of stdout split into a list
   returned: always apart from low level errors (such as action plugin)
   type: list
   sample: [['...', '...'], ['...'], ['...']]
-
 failed_conditions:
   description: The list of conditionals that have failed
   returned: failed
   type: list
   sample: ['...', '...']
-
 warnings:
   description: The list of warnings (if any) generated by module based on arguments
   returned: always
@@ -220,11 +217,11 @@ def main():
         msg = 'One or more conditional statements have not be satisfied'
         module.fail_json(msg=msg, failed_conditions=failed_conditions)
 
-    result = {
+    result.update({
         'changed': False,
         'stdout': responses,
         'stdout_lines': list(to_lines(responses))
-    }
+    })
 
     module.exit_json(**result)
 

lib/ansible/modules/network/dellos10/dellos10_config.py

@@ -31,15 +31,17 @@ options:
     description:
       - The ordered set of commands that should be configured in the
         section.  The commands must be the exact same commands as found
-        in the device running-config. Note the configuration
+        in the device running-config. Be sure to note the configuration
-        command syntax as the device config parser automatically modifies some commands. This argument is mutually exclusive with I(src).
+        command syntax as some commands are automatically modified by the
+        device config parser. This argument is mutually exclusive with I(src).
     required: false
     default: null
     aliases: ['commands']
   parents:
     description:
       - The ordered set of parents that uniquely identify the section
-        the commands should be checked against.  If you omit the parents argument, the commands are checked against the set of top
+        the commands should be checked against.  If the parents argument
+        is omitted, the commands are checked against the set of top
         level or global commands.
     required: false
     default: null
@@ -48,15 +50,15 @@ options:
       - Specifies the source path to the file that contains the configuration
         or configuration template to load.  The path to the source file can
         either be the full path on the Ansible control host or a relative
-        path from the playbook or role root directory.  This argument is mutually
+        path from the playbook or role root directory. This argument is
-        exclusive with I(lines), I(parents).
+        mutually exclusive with I(lines).
     required: false
     default: null
   before:
     description:
       - The ordered set of commands to push on to the command stack if
-        a change needs to be made.  The playbook designer can  use this argument
+        a change needs to be made.  This allows the playbook designer
-        to perform configuration commands prior to pushing
+        the opportunity to perform configuration commands prior to pushing
         any changes without affecting how the set of commands are matched
         against the system.
     required: false
@@ -64,20 +66,20 @@ options:
   after:
     description:
       - The ordered set of commands to append to the end of the command
-        stack if a change needs to be made.  As with I(before),
+        stack if a change needs to be made.  Just like with I(before) this
-        the playbook designer can use this argument  to append a set of commands to be
+        allows the playbook designer to append a set of commands to be
         executed after the command set.
     required: false
     default: null
   match:
     description:
       - Instructs the module on the way to perform the matching of
-        the set of commands against the current device config.  If you set
+        the set of commands against the current device config.  If
-        match to I(line), commands match line by line.  If you set
+        match is set to I(line), commands are matched line by line.  If
-        match to I(strict), command lines match by
+        match is set to I(strict), command lines are matched with respect
-        position.  If you set match to I(exact), command lines
+        to position.  If match is set to I(exact), command lines
-        must be an equal match.  Finally, if you set match to I(none), the
+        must be an equal match.  Finally, if match is set to I(none), the
-        module does not attempt to compare the source configuration with
+        module will not attempt to compare the source configuration with
         the running configuration on the remote device.
     required: false
     default: line
@@ -85,10 +87,10 @@ options:
   replace:
     description:
       - Instructs the module on the way to perform the configuration
-        on the device. If you set the replace argument to I(line), then
+        on the device.  If the replace argument is set to I(line) then
-        the modified lines push to the device in configuration
+        the modified lines are pushed to the device in configuration
-        mode.  If you set the replace argument to I(block), then the entire
+        mode.  If the replace argument is set to I(block) then the entire
-        command block pushes to the device in configuration mode if any
+        command block is pushed to the device in configuration mode if any
         line is not correct.
     required: false
     default: line
@@ -97,9 +99,9 @@ options:
     description:
       - The I(update) argument controls how the configuration statements
         are processed on the remote device.  Valid choices for the I(update)
-        argument are I(merge) and I(check).  When you set the argument to
+        argument are I(merge) and I(check).  When you set this argument to
         I(merge), the configuration changes merge with the current
-        device running configuration.  When you set the argument to I(check),
+        device running configuration.  When you set this argument to I(check)
         the configuration updates are determined but not actually configured
         on the remote device.
     required: false
@@ -109,34 +111,36 @@ options:
     description:
       - The C(save) argument instructs the module to save the running-
         config to the startup-config at the conclusion of the module
-        running.  If you specify check mode, this argument is ignored.
+        running.  If check mode is specified, this argument is ignored.
     required: false
     default: no
     choices: ['yes', 'no']
   config:
     description:
-      - The playbook designer can use the C(config) argument to supply
+      - The module, by default, will connect to the remote device and
-        the base configuration to be used to validate necessary configuration
+        retrieve the current running-config to use as a base for comparing
-        changes.  If you specify this argument, the module
+        against the contents of source.  There are times when it is not
-        does not download the running-config from the remote node.
+        desirable to have the task get the current running-config for
+        every task in a playbook.  The I(config) argument allows the
+        implementer to pass in the configuration to use as the base
+        config for comparison.
     required: false
     default: null
   backup:
     description:
-      - This argument causes the module to create a full backup of
+      - This argument will cause the module to create a full backup of
         the current C(running-config) from the remote device before any
         changes are made.  The backup file is written to the C(backup)
         folder in the playbook root directory.  If the directory does not
         exist, it is created.
     required: false
     default: no
-    choices: ['yes', 'no']
+    type: bool
 """
 
 EXAMPLES = """
 - dellos10_config:
     lines: ['hostname {{ inventory_hostname }}']
-    provider: "{{ cli }}"
 
 - dellos10_config:
     lines:
@@ -148,7 +152,6 @@ EXAMPLES = """
     parents: ['ip access-list test']
     before: ['no ip access-list test']
     match: exact
-    provider: "{{ cli }}"
 
 - dellos10_config:
     lines:
@@ -159,23 +162,19 @@ EXAMPLES = """
     parents: ['ip access-list test']
     before: ['no ip access-list test']
     replace: block
-    provider: "{{ cli }}"
-
 """
 
 RETURN = """
 updates:
-  description: The set of commands pushed to the remote device.
+  description: The set of commands that will be pushed to the remote device.
-  returned: Always.
+  returned: always
   type: list
-  sample: ['...', '...']
+  sample: ['hostname foo', 'router bgp 1', 'router-id 1.1.1.1']
-
+commands:
-responses:
+  description: The set of commands that will be pushed to the remote device
-  description: The set of responses from issuing the commands on the device.
+  returned: always
-  returned: When not check_mode.
   type: list
-  sample: ['...', '...']
+  sample: ['hostname foo', 'router bgp 1', 'router-id 1.1.1.1']
-
 saved:
   description: Returns whether the configuration is saved to the startup
                configuration or not.
@@ -202,10 +201,23 @@ def get_candidate(module):
         candidate.load(module.params['src'])
     elif module.params['lines']:
         parents = module.params['parents'] or list()
+        commands = module.params['lines'][0]
+        if (isinstance(commands, dict)) and (isinstance((commands['command']), list)):
+            candidate.add(commands['command'], parents=parents)
+        elif (isinstance(commands, dict)) and (isinstance((commands['command']), str)):
+            candidate.add([commands['command']], parents=parents)
+        else:
             candidate.add(module.params['lines'], parents=parents)
     return candidate
 
 
+def get_running_config(module):
+    contents = module.params['config']
+    if not contents:
+        contents = get_config(module)
+    return contents
+
+
 def main():
 
     argument_spec = dict(
@@ -229,8 +241,7 @@ def main():
 
     argument_spec.update(dellos10_argument_spec)
 
-    mutually_exclusive = [('lines', 'src'),
+    mutually_exclusive = [('lines', 'src')]
-                          ('parents', 'src')]
 
     module = AnsibleModule(argument_spec=argument_spec,
                            mutually_exclusive=mutually_exclusive,
@@ -246,27 +257,36 @@ def main():
 
     result = dict(changed=False, saved=False, warnings=warnings)
 
+    if module.params['backup']:
+        if not module.check_mode:
+            result['__backup__'] = get_config(module)
+
+    commands = list()
     candidate = get_candidate(module)
+
+    if any((module.params['lines'], module.params['src'])):
         if match != 'none':
-        config = get_config(module)
+            config = get_running_config(module)
             if parents:
                 contents = get_sublevel_config(config, module)
                 config = NetworkConfig(contents=contents, indent=1)
             else:
                 config = NetworkConfig(contents=config, indent=1)
             configobjs = candidate.difference(config, match=match, replace=replace)
-
         else:
             configobjs = candidate.items
 
-    if module.params['backup']:
-        if not module.check_mode:
-            result['__backup__'] = get_config(module)
-
-    commands = list()
-
         if configobjs:
             commands = dumps(configobjs, 'commands')
+            if ((isinstance((module.params['lines']), list)) and
+                    (isinstance((module.params['lines'][0]), dict)) and
+                    (['prompt', 'answer'].issubset(module.params['lines'][0]))):
+
+                cmd = {'command': commands,
+                       'prompt': module.params['lines'][0]['prompt'],
+                       'answer': module.params['lines'][0]['answer']}
+                commands = [module.jsonify(cmd)]
+            else:
                 commands = commands.split('\n')
 
             if module.params['before']:
@@ -278,14 +298,21 @@ def main():
             if not module.check_mode and module.params['update'] == 'merge':
                 load_config(module, commands)
 
+            result['changed'] = True
+            result['commands'] = commands
+            result['updates'] = commands
+
     if module.params['save']:
-                cmd = {'command': 'copy runing-config startup-config', 'prompt': WARNING_PROMPTS_RE, 'answer': 'yes'}
+        result['changed'] = True
+        if not module.check_mode:
+            cmd = {r'command': 'copy running-config startup-config',
+                   r'prompt': r'\[confirm yes/no\]:\s?$', 'answer': 'yes'}
             run_commands(module, [cmd])
             result['saved'] = True
-
+        else:
-        result['changed'] = True
+            module.warn('Skipping command `copy running-config startup-config`'
-
+                        'due to check_mode.  Configuration not copied to '
-    result['updates'] = commands
+                        'non-volatile storage')
 
     module.exit_json(**result)
 

lib/ansible/modules/network/dellos10/dellos10_facts.py

@@ -23,16 +23,17 @@ description:
   - Collects a base set of device facts from a remote device that
     is running OS10.  This module prepends all of the
     base network fact keys with C(ansible_net_<fact>).  The facts
-    module always collects a base set of facts from the device
+    module will always collect a base set of facts from the device
     and can enable or disable collection of additional facts.
 extends_documentation_fragment: dellos10
 options:
   gather_subset:
     description:
-      - When supplied, this argument restricts the facts collected
+      - When supplied, this argument will restrict the facts collected
         to a given subset.  Possible values for this argument include
-        all, hardware, config, and interfaces.  You can specify a list of
+        all, hardware, config, and interfaces.  Can specify a list of
-        values to include a larger subset.  You can also use values with an initial M(!) to specify that a specific subset should
+        values to include a larger subset.  Values can also be used
+        with an initial C(M(!)) to specify that a specific subset should
         not be collected.
     required: false
     default: '!config'
@@ -56,8 +57,8 @@ EXAMPLES = """
 
 RETURN = """
 ansible_net_gather_subset:
-  description: The list of fact subsets collected from the device.
+  description: The list of fact subsets collected from the device
-  returned: Always.
+  returned: always
   type: list
 
 # default
@@ -66,58 +67,58 @@ ansible_net_name:
   returned: Always.
   type: str
 ansible_net_version:
-  description: The operating system version running on the remote device.
+  description: The operating system version running on the remote device
-  returned: Always.
+  returned: always
   type: str
 ansible_net_servicetag:
   description: The service tag number of the remote device.
-  returned: Always.
+  returned: always
   type: str
 ansible_net_model:
   description: The model name returned from the device.
-  returned: Always.
+  returned: always
   type: str
 ansible_net_hostname:
-  description: The configured hostname of the device.
+  description: The configured hostname of the device
-  returned: Always.
+  returned: always
   type: str
 
 # hardware
 ansible_net_cpu_arch:
   description: CPU Architecture of the remote device.
-  returned: When hardware is configured.
+  returned: when hardware is configured
   type: str
 ansible_net_memfree_mb:
-  description: The available free memory on the remote device in MB.
+  description: The available free memory on the remote device in Mb
-  returned: When hardware is configured.
+  returned: when hardware is configured
   type: int
 ansible_net_memtotal_mb:
-  description: The total memory on the remote device in MB.
+  description: The total memory on the remote device in Mb
-  returned: When hardware is configured.
+  returned: when hardware is configured
   type: int
 
 # config
 ansible_net_config:
-  description: The current active config from the device.
+  description: The current active config from the device
-  returned: When config is configured.
+  returned: when config is configured
   type: str
 
 # interfaces
 ansible_net_all_ipv4_addresses:
-  description: All IPv4 addresses configured on the device.
+  description: All IPv4 addresses configured on the device
-  returned: When interfaces is configured
+  returned: when interfaces is configured
   type: list
 ansible_net_all_ipv6_addresses:
-  description: All IPv6 addresses configured on the device.
+  description: All IPv6 addresses configured on the device
-  returned: When interfaces is configured.
+  returned: when interfaces is configured
   type: list
 ansible_net_interfaces:
-  description: A hash of all interfaces running on the system.
+  description: A hash of all interfaces running on the system
-  returned: When interfaces is configured.
+  returned: when interfaces is configured
   type: dict
 ansible_net_neighbors:
-  description: The list of LLDP neighbors from the remote device.
+  description: The list of LLDP neighbors from the remote device
-  returned: When interfaces is configured.
+  returned: when interfaces is configured
   type: dict
 """
 
@@ -212,7 +213,7 @@ class Hardware(FactsBase):
 
     COMMANDS = [
         'show version | display-xml',
-        'show processes node-id 1 | grep "Mem:"'
+        'show processes node-id 1 | grep Mem:'
     ]
 
     def populate(self):

lib/ansible/plugins/action/dellos10.py

@@ -1,7 +1,7 @@
 #
 # (c) 2016 Red Hat Inc.
 #
-# Copyright (c) 2017 Dell Inc.
+# (c) 2017 Dell EMC.
 #
 # This file is part of Ansible
 #
@@ -28,8 +28,8 @@ from ansible import constants as C
 from ansible.module_utils._text import to_text
 from ansible.module_utils.connection import Connection
 from ansible.plugins.action.normal import ActionModule as _ActionModule
-from ansible.module_utils.network.dellos10.dellos10 import dellos10_provider_spec
 from ansible.module_utils.network.common.utils import load_provider
+from ansible.module_utils.network.dellos10.dellos10 import dellos10_provider_spec
 
 try:
     from __main__ import display
@@ -41,16 +41,14 @@ except ImportError:
 class ActionModule(_ActionModule):
 
     def run(self, tmp=None, task_vars=None):
+        socket_path = None
 
-        if self._play_context.connection != 'local':
+        if self._play_context.connection == 'network_cli':
-            return dict(
+            provider = self._task.args.get('provider', {})
-                failed=True,
+            if any(provider.values()):
-                msg='invalid connection specified, expected connection=local, '
+                display.warning('provider is unnecessary when using network_cli and will be ignored')
-                    'got %s' % self._play_context.connection
+        elif self._play_context.connection == 'local':
-            )
-
             provider = load_provider(dellos10_provider_spec, self._task.args)
-
             pc = copy.deepcopy(self._play_context)
             pc.connection = 'network_cli'
             pc.network_os = 'dellos10'
@@ -61,9 +59,11 @@ class ActionModule(_ActionModule):
             pc.private_key_file = provider['ssh_keyfile'] or self._play_context.private_key_file
             pc.timeout = int(provider['timeout'] or C.PERSISTENT_COMMAND_TIMEOUT)
             pc.become = provider['authorize'] or False
+            if pc.become:
+                pc.become_method = 'enable'
             pc.become_pass = provider['auth_pass']
 
-        display.vvv('using connection plugin %s (was local)' % pc.connection, pc.remote_addr)
+            display.vvv('using connection plugin %s' % pc.connection, pc.remote_addr)
             connection = self._shared_loader_obj.connection_loader.get('persistent', pc, sys.stdin)
 
             socket_path = connection.run()
@@ -73,8 +73,13 @@ class ActionModule(_ActionModule):
                         'msg': 'unable to open shell. Please see: ' +
                                'https://docs.ansible.com/ansible/network_debug_troubleshooting.html#unable-to-open-shell'}
 
+            task_vars['ansible_socket'] = socket_path
+
         # make sure we are in the right cli context which should be
         # enable mode and not config module
+        if socket_path is None:
+            socket_path = self._connection.socket_path
+
         conn = Connection(socket_path)
         out = conn.get_prompt()
         while to_text(out, errors='surrogate_then_replace').strip().endswith(')#'):
@@ -82,11 +87,5 @@ class ActionModule(_ActionModule):
             conn.send_command('exit')
             out = conn.get_prompt()
 
-        task_vars['ansible_socket'] = socket_path
-
-        if self._play_context.become_method == 'enable':
-            self._play_context.become = False
-            self._play_context.become_method = None
-
         result = super(ActionModule, self).run(tmp, task_vars)
         return result

lib/ansible/plugins/cliconf/dellos10.py

@@ -0,0 +1,82 @@
+#
+# (c) 2017 Red Hat Inc.
+#
+# (c) 2017 Dell EMC.
+#
+# This file is part of Ansible
+#
+# Ansible is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# Ansible is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with Ansible.  If not, see <http://www.gnu.org/licenses/>.
+#
+from __future__ import (absolute_import, division, print_function)
+__metaclass__ = type
+
+import re
+import json
+
+from itertools import chain
+
+from ansible.module_utils._text import to_bytes, to_text
+from ansible.module_utils.network.common.utils import to_list
+from ansible.plugins.cliconf import CliconfBase, enable_mode
+
+
+class Cliconf(CliconfBase):
+
+    def get_device_info(self):
+        device_info = {}
+
+        device_info['network_os'] = 'dellos10'
+        reply = self.get(b'show version')
+        data = to_text(reply, errors='surrogate_or_strict').strip()
+
+        match = re.search(r'OS Version (\S+)', data)
+        if match:
+            device_info['network_os_version'] = match.group(1)
+
+        match = re.search(r'System Type (\S+)', data, re.M)
+        if match:
+            device_info['network_os_model'] = match.group(1)
+
+        reply = self.get(b'show running-configuration | grep hostname')
+        data = to_text(reply, errors='surrogate_or_strict').strip()
+        match = re.search(r'^hostname (.+)', data, re.M)
+        if match:
+            device_info['network_os_hostname'] = match.group(1)
+
+        return device_info
+
+    @enable_mode
+    def get_config(self, source='running'):
+        if source not in ('running', 'startup'):
+            return self.invalid_params("fetching configuration from %s is not supported" % source)
+        if source == 'running':
+            cmd = b'show running-config all'
+        else:
+            cmd = b'show startup-config'
+        return self.send_command(cmd)
+
+    @enable_mode
+    def edit_config(self, command):
+        for cmd in chain(['configure terminal'], to_list(command), ['end']):
+            self.send_command(to_bytes(cmd))
+
+    def get(self, command, prompt=None, answer=None, sendonly=False):
+        return self.send_command(command, prompt=prompt, answer=answer, sendonly=sendonly)
+
+    def get_capabilities(self):
+        result = {}
+        result['rpc'] = self.get_base_rpc()
+        result['network_api'] = 'cliconf'
+        result['device_info'] = self.get_device_info()
+        return json.dumps(result)

test/integration/dellos10.yaml

@@ -5,9 +5,9 @@
 
   vars:
     limit_to: "*"
-    debug: false
+    test_items: ""
 
   roles:
-   - { role: dellos10_command, when: "limit_to in ['*', 'dellos10_command']" }
+   - { role: test_dellos10_command, when: "limit_to in ['*', 'dellos10_command']" }
-   - { role: dellos10_config, when: "limit_to in ['*', 'dellos10_config']" }
+   - { role: test_dellos10_config, when: "limit_to in ['*', 'dellos10_config']" }
-   - { role: dellos10_facts, when: "limit_to in ['*', 'dellos10_facts']" }
+   - { role: test_dellos10_facts, when: "limit_to in ['*', 'dellos10_facts']" }

test/integration/group_vars/dellos10.yaml

@@ -0,0 +1,6 @@
+---
+cli:
+  host: "{{ ansible_host }}"
+  username: "{{ dellos10_cli_user | default('admin') }}"
+  password: "{{ dellos10_cli_pass | default('admin') }}"
+  transport: cli

test/integration/roles/test_dellos10_command/defaults/main.yaml

@@ -0,0 +1,2 @@
+---
+testcase: "*"

test/integration/roles/test_dellos10_command/tasks/cli.yaml

@@ -0,0 +1,14 @@
+---
+- name: collect all cli test cases
+  find:
+    paths: "{{ role_path }}/tests/cli"
+    patterns: "{{ testcase }}.yaml"
+  register: test_cases
+
+- name: set test_items
+  set_fact: 
+    test_items: "{{ test_cases.files | map(attribute='path') | list }}"
+
+- name: run test case
+  include: "{{ item }}"
+  with_items: "{{ test_items }}"

test/integration/roles/test_dellos10_command/tasks/main.yaml

@@ -0,0 +1,2 @@
+---
+- { include: cli.yaml, tags: ['cli'] }

test/integration/roles/test_dellos10_command/tests/cli/bad_operator.yaml

@@ -0,0 +1,20 @@
+---
+- debug: msg="START cli/bad_operator.yaml"
+
+- name: test bad operator
+  dellos10_command:
+    commands:
+      - show version
+      - show interface ethernet 1/1/1
+    wait_for:
+      - "result[0] contains 'Description : blah'"
+    provider: "{{ cli }}"
+  register: result
+  ignore_errors: yes
+
+- assert:
+    that:
+      - "result.failed == true"
+      - "result.msg is defined"
+
+- debug: msg="END cli/bad_operator.yaml"

test/integration/roles/test_dellos10_command/tests/cli/contains.yaml

@@ -0,0 +1,20 @@
+---
+- debug: msg="START cli/contains.yaml"
+
+- name: test contains operator
+  dellos10_command:
+    commands:
+      - show version
+      - show interface ethernet 1/1/1
+    wait_for:
+      - "result[0] contains OS10-Premium"
+      - "result[1] contains Ethernet "
+    provider: "{{ cli }}"
+  register: result
+
+- assert:
+    that:
+      - "result.changed == false"
+      - "result.stdout is defined"
+
+- debug: msg="END cli/contains.yaml"

test/integration/roles/test_dellos10_command/tests/cli/invalid.yaml

@@ -0,0 +1,28 @@
+---
+- debug: msg="START cli/invalid.yaml"
+
+- name: run invalid command
+  dellos10_command:
+    commands: ['show foo']
+    provider: "{{ cli }}"
+  register: result
+  ignore_errors: yes
+
+- assert:
+    that:
+      - "'Error: Unrecognized command' in  result.stdout"
+
+- name: run commands that include invalid command
+  dellos10_command:
+    commands:
+      - show version
+      - show foo
+    provider: "{{ cli }}"
+  register: result
+  ignore_errors: yes
+
+- assert:
+    that:
+      - "'Error: Unrecognized command' in  result.stdout"
+
+- debug: msg="END cli/invalid.yaml"

test/integration/roles/test_dellos10_command/tests/cli/output.yaml

@@ -0,0 +1,29 @@
+---
+- debug: msg="START cli/output.yaml"
+
+- name: get output for single command
+  dellos10_command:
+    commands: ['show version']
+    provider: "{{ cli }}"
+  register: result
+
+- assert:
+    that:
+      - "result.changed == false"
+      - "result.stdout is defined"
+
+- name: get output for multiple commands
+  dellos10_command:
+    commands:
+      - show version
+      - show interface Eth 1/1/1
+    provider: "{{ cli }}"
+  register: result
+
+- assert:
+    that:
+      - "result.changed == false"
+      - "result.stdout is defined"
+      - "result.stdout | length == 2"
+
+- debug: msg="END cli/output.yaml"

test/integration/roles/test_dellos10_command/tests/cli/timeout.yaml

@@ -0,0 +1,19 @@
+---
+- debug: msg="START cli/timeout.yaml"
+
+- name: test bad condition
+  dellos10_command:
+    commands:
+      - show version
+    wait_for:
+      - "result[0] contains bad_value_string"
+    provider: "{{ cli }}"
+  register: result
+  ignore_errors: yes
+
+- assert:
+    that:
+      - "result.failed == true"
+      - "result.msg is defined"
+
+- debug: msg="END cli/timeout.yaml"

test/integration/roles/test_dellos10_config/defaults/main.yaml

@@ -0,0 +1,2 @@
+---
+testcase: "*"

test/integration/roles/test_dellos10_config/tasks/cli.yaml

@@ -0,0 +1,13 @@
+---
+- name: collect all cli test cases
+  find:
+    paths: "{{ role_path }}/tests/cli"
+    patterns: "{{ testcase }}.yaml"
+  register: test_cases
+
+- name: set test_items
+  set_fact: test_items="{{ test_cases.files | map(attribute='path') | list }}"
+
+- name: run test case
+  include: "{{ item }}"
+  with_items: "{{ test_items }}"

test/integration/roles/test_dellos10_config/tasks/main.yaml

@@ -0,0 +1,2 @@
+---
+- { include: cli.yaml, tags: ['cli'] }

test/integration/roles/test_dellos10_config/templates/basic/config.j2

@@ -0,0 +1,4 @@
+interface loopback999
+ shutdown
+ description basic
+

test/integration/roles/test_dellos10_config/templates/defaults/config.j2

@@ -0,0 +1,3 @@
+interface loopback999
+ no shutdown
+ description default

test/integration/roles/test_dellos10_config/tests/cli/backup.yaml

@@ -0,0 +1,58 @@
+---
+- debug: msg="START cli/backup.yaml"
+
+- name: setup
+  dellos10_config:
+    commands:
+      - interface loopback 999
+      - no interface loopback 999
+    match: none
+    provider: "{{ cli }}"
+  ignore_errors: yes
+
+- name: collect any backup files
+  find:
+    paths: "{{ role_path }}/backup"
+    pattern: "{{ inventory_hostname }}_config*"
+  register: backup_files
+  delegate_to: localhost
+
+- name: delete backup files
+  file:
+    path: "{{ backupitem.path }}"
+    state: absent
+  with_items: "{{ backup_files.files }}"
+  loop_control:
+    loop_var: backupitem
+
+- name: configure device with config
+  dellos10_config:
+    src: basic/config.j2
+    backup: yes
+    provider: "{{ cli }}"
+  register: result
+
+- assert:
+    that:
+      - "result.changed == true"
+      - "result.updates is defined"
+
+- name: collect any backup files
+  find:
+    paths: "{{ role_path }}/backup"
+    pattern: "{{ inventory_hostname }}_config*"
+  register: backup_files
+  delegate_to: localhost
+
+- assert:
+    that:
+      - "backup_files.files is defined"
+
+- name: teardown
+  dellos10_config:
+    commands:
+      - no interface loopback999
+    match: none
+    provider: "{{ cli }}"
+
+- debug: msg="END cli/backup.yaml"

test/integration/roles/test_dellos10_config/tests/cli/basic.yaml

@@ -0,0 +1,42 @@
+---
+- debug: msg="START cli/basic.yaml"
+
+- name: setup
+  dellos10_config:
+    commands:
+      - interface loopback 999
+      - no interface loopback 999
+    match: none
+    provider: "{{ cli }}"
+  ignore_errors: yes
+
+- name: configure device with config
+  dellos10_config:
+    src: basic/config.j2
+    provider: "{{ cli }}"
+  register: result
+
+- assert:
+    that:
+      - "result.changed == true"
+      - "result.updates is defined"
+
+- name: check device with config
+  dellos10_config:
+    src: basic/config.j2
+    provider: "{{ cli }}"
+  register: result
+
+- assert:
+    that:
+      - "result.changed == false"
+      - "result.updates is defined"
+
+- name: teardown
+  dellos10_config:
+    commands:
+      - no interface loopback999
+    match: none
+    provider: "{{ cli }}"
+
+- debug: msg="END cli/basic.yaml"

test/integration/roles/test_dellos10_config/tests/cli/defaults.yaml

@@ -0,0 +1,46 @@
+---
+- debug: msg="START cli/defaults.yaml"
+
+- name: setup
+  dellos10_config:
+    commands:
+      - interface loopback 999
+      - no interface loopback 999
+    match: none
+    provider: "{{ cli }}"
+  ignore_errors: yes
+
+- name: configure device with defaults included
+  dellos10_config:
+    src: defaults/config.j2
+    provider: "{{ cli }}"
+  register: result
+
+- debug: var=result
+
+- assert:
+    that:
+      - "result.changed == true"
+      - "result.updates is defined"
+
+- name: check device with defaults included
+  dellos10_config:
+    src: defaults/config.j2
+    provider: "{{ cli }}"
+  register: result
+
+- debug: var=result
+
+- assert:
+    that:
+      - "result.changed == false"
+      - "result.updates is defined"
+
+- name: teardown
+  dellos10_config:
+    commands:
+      - no interface loopback999
+    match: none
+    provider: "{{ cli }}"
+
+- debug: msg="END cli/defaults.yaml"

test/integration/roles/test_dellos10_config/tests/cli/force.yaml

@@ -0,0 +1,44 @@
+---
+- debug: msg="START cli/force.yaml"
+
+- name: setup
+  dellos10_config:
+    commands:
+      - interface loopback 999
+      - no interface loopback 999
+    match: none
+    provider: "{{ cli }}"
+  ignore_errors: yes
+
+- name: configure device with config
+  dellos10_config:
+    src: basic/config.j2
+    provider: "{{ cli }}"
+    match: none
+  register: result
+
+- assert:
+    that:
+      - "result.changed == true"
+      - "result.updates is defined"
+
+- name: check device with config
+  dellos10_config:
+    src: basic/config.j2
+    provider: "{{ cli }}"
+    match: none
+  register: result
+
+- assert:
+    that:
+      - "result.changed == true"
+      - "result.updates is defined"
+
+- name: teardown
+  dellos10_config:
+    commands:
+      - no interface loopback999
+    match: none
+    provider: "{{ cli }}"
+
+- debug: msg="END cli/force.yaml"

test/integration/roles/test_dellos10_config/tests/cli/sublevel.yaml

@@ -0,0 +1,42 @@
+---
+- debug: msg="START cli/sublevel.yaml"
+
+- name: setup test
+  dellos10_config:
+    lines:
+      - 'no ip access-list test'
+    provider: "{{ cli }}"
+    match: none
+
+- name: configure sub level command
+  dellos10_config:
+    lines: ['seq 5 permit ip any any count byte']
+    parents: ['ip access-list test']
+    provider: "{{ cli }}"
+  register: result
+
+- assert:
+    that:
+      - "result.changed == true"
+      - "'ip access-list test' in result.updates"
+      - "'seq 5 permit ip any any count byte' in result.updates"
+
+- name: configure sub level command idempotent check
+  dellos10_config:
+    lines: ['seq 5 permit ip any any count byte']
+    parents: ['ip access-list test']
+    provider: "{{ cli }}"
+  register: result
+
+- assert:
+    that:
+      - "result.changed == false"
+
+- name: teardown
+  dellos10_config:
+    lines:
+      - 'no ip access-list test'
+    provider: "{{ cli }}"
+    match: none
+
+- debug: msg="END cli/sublevel.yaml"

test/integration/roles/test_dellos10_config/tests/cli/sublevel_block.yaml

@@ -0,0 +1,62 @@
+---
+- debug: msg="START cli/sublevel_block.yaml"
+
+- name: setup
+  dellos10_config:
+    lines:
+      - seq 5 permit ip host 1.1.1.1 any count byte
+      - seq 10 permit ip host 2.2.2.2 any count byte
+      - seq 15 permit ip host 3.3.3.3 any count byte 
+    parents: ['ip access-list test']
+    before: ['no ip access-list test']
+    after: ['exit']
+    provider: "{{ cli }}"
+    match: none
+
+- name: configure sub level command using block resplace
+  dellos10_config:
+    lines:
+      - seq 5 permit ip host 1.1.1.1 any count byte
+      - seq 10 permit ip host 2.2.2.2 any count byte
+      - seq 15 permit ip host 3.3.3.3 any count byte 
+      - seq 20 permit ip host 4.4.4.4 any count byte
+    parents: ['ip access-list test']
+    replace: block
+    after: ['exit']
+    provider: "{{ cli }}"
+  register: result
+
+- assert:
+    that:
+      - "result.changed == true"
+      - "'ip access-list test' in result.updates"
+      - "'seq 5 permit ip host 1.1.1.1 any count byte' in result.updates"
+      - "'seq 10 permit ip host 2.2.2.2 any count byte' in result.updates"
+      - "'seq 15 permit ip host 3.3.3.3 any count byte' in result.updates"
+      - "'seq 20 permit ip host 4.4.4.4 any count byte' in result.updates"
+
+- name: check sub level command using block replace
+  dellos10_config:
+    lines:
+      - seq 5 permit ip host 1.1.1.1 any count byte
+      - seq 10 permit ip host 2.2.2.2 any count byte
+      - seq 15 permit ip host 3.3.3.3 any count byte 
+      - seq 20 permit ip host 4.4.4.4 any count byte
+    parents: ['ip access-list test']
+    replace: block
+    after: ['exit']
+    provider: "{{ cli }}"
+  register: result
+
+- assert:
+    that:
+      - "result.changed == false"
+
+- name: teardown
+  dellos10_config:
+    lines:
+      - no ip access-list test
+    match: none
+    provider: "{{ cli }}"
+
+- debug: msg="END cli/sublevel_block.yaml"

test/integration/roles/test_dellos10_config/tests/cli/sublevel_exact.yaml

@@ -0,0 +1,66 @@
+---
+- debug: msg="START cli/sublevel_exact.yaml"
+
+- name: setup
+  dellos10_config:
+    lines:
+      - seq 5 permit ip host 1.1.1.1 any count byte
+      - seq 10 permit ip host 2.2.2.2 any count byte
+      - seq 15 permit ip host 3.3.3.3 any count byte 
+      - seq 20 permit ip host 4.4.4.4 any count byte
+      - seq 25 permit ip host 5.5.5.5 any count byte
+    parents: ['ip access-list test']
+    before: ['no ip access-list test']
+    after: ['exit']
+    provider: "{{ cli }}"
+    match: none
+
+- name: configure sub level command using exact match
+  dellos10_config:
+    lines:
+      - seq 5 permit ip host 1.1.1.1 any count byte
+      - seq 10 permit ip host 2.2.2.2 any count byte
+      - seq 15 permit ip host 3.3.3.3 any count byte 
+      - seq 20 permit ip host 4.4.4.4 any count byte
+    parents: ['ip access-list test']
+    after: ['exit']
+    match: exact
+    provider: "{{ cli }}"
+  register: result
+
+- assert:
+    that:
+      - "result.changed == true"
+      - "'ip access-list test' in result.updates"
+      - "'seq 5 permit ip host 1.1.1.1 any count byte' in result.updates"
+      - "'seq 10 permit ip host 2.2.2.2 any count byte' in result.updates"
+      - "'seq 15 permit ip host 3.3.3.3 any count byte' in result.updates"
+      - "'seq 20 permit ip host 4.4.4.4 any count byte' in result.updates"
+      - "'seq 25 permit ip host 5.5.5.5 any count byte' not in result.updates"
+
+- name: check sub level command using exact match
+  dellos10_config:
+    lines:
+      - seq 5 permit ip host 1.1.1.1 any count byte
+      - seq 10 permit ip host 2.2.2.2 any count byte
+      - seq 15 permit ip host 3.3.3.3 any count byte 
+      - seq 20 permit ip host 4.4.4.4 any count byte
+      - seq 25 permit ip host 5.5.5.5 any count byte
+    parents: ['ip access-list test']
+    after: ['exit']
+    match: exact
+    provider: "{{ cli }}"
+  register: result
+
+- assert:
+    that:
+      - "result.changed == false"
+
+- name: teardown
+  dellos10_config:
+    lines:
+      - no ip access-list test
+    provider: "{{ cli }}"
+    match: none
+
+- debug: msg="END cli/sublevel_exact.yaml"

test/integration/roles/test_dellos10_config/tests/cli/sublevel_strict.yaml

@@ -0,0 +1,63 @@
+---
+- debug: msg="START cli/sublevel_strict.yaml"
+
+- name: setup
+  dellos10_config:
+    lines:
+      - seq 5 permit ip host 1.1.1.1 any count byte
+      - seq 10 permit ip host 2.2.2.2 any count byte
+      - seq 15 permit ip host 3.3.3.3 any count byte 
+      - seq 20 permit ip host 4.4.4.4 any count byte
+      - seq 25 permit ip host 5.5.5.5 any count byte
+    parents: ['ip access-list test']
+    before: ['no ip access-list test']
+    after: ['exit']
+    provider: "{{ cli }}"
+    match: none
+
+- name: configure sub level command using strict match
+  dellos10_config:
+    lines:
+      - seq 5 permit ip host 1.1.1.1 any count byte
+      - seq 10 permit ip host 2.2.2.2 any count byte
+      - seq 15 permit ip host 3.3.3.3 any count byte 
+      - seq 20 permit ip host 4.4.4.4 any count byte
+    parents: ['ip access-list test']
+    match: strict
+    provider: "{{ cli }}"
+  register: result
+
+- assert:
+    that:
+      - "result.changed == false"
+
+- name: check sub level command using strict match
+  dellos10_config:
+    lines:
+      - seq 5 permit ip host 1.1.1.1 any count byte
+      - seq 15 permit ip host 3.3.3.3 any count byte 
+      - seq 10 permit ip host 2.2.2.2 any count byte
+    parents: ['ip access-list test']
+    after: ['exit']
+    match: strict
+    provider: "{{ cli }}"
+  register: result
+
+- assert:
+    that:
+      - "result.changed == true"
+      - "'ip access-list test' in result.updates"
+      - "'seq 5 permit ip host 1.1.1.1 any count byte' not in result.updates"
+      - "'seq 10 permit ip host 2.2.2.2 any count byte' in result.updates"
+      - "'seq 15 permit ip host 3.3.3.3 any count byte' in result.updates"
+      - "'seq 20 permit ip host 4.4.4.4 any count byte' not in result.updates"
+      - "'seq 25 permit ip host 5.5.5.5 any count byte' not in result.updates"
+
+- name: teardown
+  dellos10_config:
+    lines:
+      - no ip access-list test
+    provider: "{{ cli }}"
+    match: none
+
+- debug: msg="END cli/sublevel_strict.yaml"

test/integration/roles/test_dellos10_config/tests/cli/toplevel.yaml

@@ -0,0 +1,37 @@
+---
+- debug: msg="START cli/toplevel.yaml"
+
+- name: setup
+  dellos10_config:
+    lines: ['hostname {{ inventory_hostname }}']
+    provider: "{{ cli }}"
+    match: none
+
+- name: configure top level command
+  dellos10_config:
+    lines: ['hostname foo']
+    provider: "{{ cli }}"
+  register: result
+
+- assert:
+    that:
+      - "result.changed == true"
+      - "'hostname foo' in result.updates"
+
+- name: configure top level command idempotent check
+  dellos10_config:
+    lines: ['hostname foo']
+    provider: "{{ cli }}"
+  register: result
+
+- assert:
+    that:
+      - "result.changed == false"
+
+- name: teardown
+  dellos10_config:
+    lines: ['hostname {{ inventory_hostname }}']
+    provider: "{{ cli }}"
+    match: none
+
+- debug: msg="END cli/toplevel.yaml"

test/integration/roles/test_dellos10_config/tests/cli/toplevel_after.yaml

@@ -0,0 +1,44 @@
+---
+- debug: msg="START cli/toplevel_after.yaml"
+
+- name: setup
+  dellos10_config:
+    lines:
+      - "snmp-server contact ansible"
+      - "hostname {{ inventory_hostname }}"
+    provider: "{{ cli }}"
+    match: none
+
+- name: configure top level command with before
+  dellos10_config:
+    lines: ['hostname foo']
+    after: ['snmp-server contact bar']
+    provider: "{{ cli }}"
+  register: result
+
+- assert:
+    that:
+      - "result.changed == true"
+      - "'hostname foo' in result.updates"
+      - "'snmp-server contact bar' in result.updates"
+
+- name: configure top level command with before idempotent check
+  dellos10_config:
+    lines: ['hostname foo']
+    after: ['snmp-server contact foo']
+    provider: "{{ cli }}"
+  register: result
+
+- assert:
+    that:
+      - "result.changed == false"
+
+- name: teardown
+  dellos10_config:
+    lines:
+      - "no snmp-server contact"
+      - "hostname {{ inventory_hostname }}"
+    provider: "{{ cli }}"
+    match: none
+
+- debug: msg="END cli/toplevel_after.yaml"

test/integration/roles/test_dellos10_config/tests/cli/toplevel_before.yaml

@@ -0,0 +1,44 @@
+---
+- debug: msg="START cli/toplevel_before.yaml"
+
+- name: setup
+  dellos10_config:
+    lines:
+      - "snmp-server contact ansible"
+      - "hostname {{ inventory_hostname }}"
+    provider: "{{ cli }}"
+    match: none
+
+- name: configure top level command with before
+  dellos10_config:
+    lines: ['hostname foo']
+    before: ['snmp-server contact bar']
+    provider: "{{ cli }}"
+  register: result
+
+- assert:
+    that:
+      - "result.changed == true"
+      - "'hostname foo' in result.updates"
+      - "'snmp-server contact bar' in result.updates"
+
+- name: configure top level command with before idempotent check
+  dellos10_config:
+    lines: ['hostname foo']
+    before: ['snmp-server contact foo']
+    provider: "{{ cli }}"
+  register: result
+
+- assert:
+    that:
+      - "result.changed == false"
+
+- name: teardown
+  dellos10_config:
+    lines:
+      - "no snmp-server contact"
+      - "hostname {{ inventory_hostname }}"
+    provider: "{{ cli }}"
+    match: none
+
+- debug: msg="END cli/toplevel_before.yaml"

test/integration/roles/test_dellos10_config/tests/cli/toplevel_nonidempotent.yaml

@@ -0,0 +1,39 @@
+---
+- debug: msg="START cli/toplevel_nonidempotent.yaml"
+
+- name: setup
+  dellos10_config:
+    lines: ['hostname {{ inventory_hostname }}']
+    provider: "{{ cli }}"
+    match: none
+
+- name: configure top level command
+  dellos10_config:
+    lines: ['hostname foo']
+    provider: "{{ cli }}"
+    match: strict
+  register: result
+
+- assert:
+    that:
+      - "result.changed == true"
+      - "'hostname foo' in result.updates"
+
+- name: configure top level command idempotent check
+  dellos10_config:
+    lines: ['hostname foo']
+    provider: "{{ cli }}"
+    match: strict
+  register: result
+
+- assert:
+    that:
+      - "result.changed == false"
+
+- name: teardown
+  dellos10_config:
+    lines: ['hostname {{ inventory_hostname }}']
+    provider: "{{ cli }}"
+    match: none
+
+- debug: msg="END cli/toplevel_nonidempotent.yaml"

test/integration/roles/test_dellos10_facts/defaults/main.yaml

@@ -0,0 +1,2 @@
+---
+testcase: "*"

test/integration/roles/test_dellos10_facts/tasks/cli.yaml

@@ -0,0 +1,14 @@
+---
+- name: collect all cli test cases
+  find:
+    paths: "{{ role_path }}/tests/cli"
+    patterns: "{{ testcase }}.yaml"
+  register: test_cases
+
+- name: set test_items
+  set_fact: 
+    test_items: "{{ test_cases.files | map(attribute='path') | list }}"
+
+- name: run test case
+  include: "{{ item }}"
+  with_items: "{{ test_items }}"

test/integration/roles/test_dellos10_facts/tasks/main.yaml

@@ -0,0 +1,2 @@
+---
+- { include: cli.yaml, tags: ['cli'] }

test/integration/roles/test_dellos10_facts/tests/cli/facts.yaml

@@ -0,0 +1,48 @@
+---
+- debug: msg="START cli/facts.yaml"
+
+- name: test all facts
+  dellos10_facts:
+    gather_subset:
+      - all
+    provider: "{{ cli }}"
+  register: result
+
+- assert:
+    that:
+      - "result.changed == false"
+      - "result.ansible_facts is defined"
+      - "result.ansible_facts.ansible_net_interfaces is defined"
+      - "result.ansible_facts.ansible_net_memfree_mb is defined"
+      - "result.ansible_facts.ansible_net_model is defined"
+      - "result.ansible_facts.ansible_net_servicetag is defined"
+      - "result.ansible_facts.ansible_net_version is defined"
+
+- name: test all facts except hardware
+  dellos10_facts:
+    gather_subset:
+      - "!hardware"
+    provider: "{{ cli }}"
+  register: result
+
+- assert:
+    that:
+      - "result.changed == false"
+      - "result.ansible_facts.ansible_net_interfaces is defined"
+      - "result.ansible_facts.ansible_net_memfree_mb is not defined"
+
+- name: test interface facts
+  dellos10_facts:
+    gather_subset:
+      - interfaces
+    provider: "{{ cli }}"
+  register: result
+
+- assert:
+    that:
+      - "result.changed == false"
+      - "result.ansible_facts.ansible_net_interfaces is defined"
+      - "result.ansible_facts.ansible_net_memfree_mb is not defined"
+
+
+- debug: msg="END cli/facts.yaml"

test/units/modules/network/dellos10/dellos10_module.py

@@ -0,0 +1,90 @@
+# (c) 2016 Red Hat Inc.
+#
+# (c) 2017 Dell EMC.
+#
+# This file is part of Ansible
+#
+# Ansible is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# Ansible is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with Ansible.  If not, see <http://www.gnu.org/licenses/>.
+
+# Make coding more python3-ish
+from __future__ import (absolute_import, division, print_function)
+__metaclass__ = type
+
+import os
+import json
+
+from units.modules.utils import AnsibleExitJson, AnsibleFailJson, ModuleTestCase
+
+
+fixture_path = os.path.join(os.path.dirname(__file__), 'fixtures')
+fixture_data = {}
+
+
+def load_fixture(name):
+    path = os.path.join(fixture_path, name)
+
+    if path in fixture_data:
+        return fixture_data[path]
+
+    with open(path) as f:
+        data = f.read()
+
+    try:
+        data = json.loads(data)
+    except:
+        pass
+
+    fixture_data[path] = data
+    return data
+
+
+class TestDellos10Module(ModuleTestCase):
+
+    def execute_module(self, failed=False, changed=False, commands=None, sort=True, defaults=False):
+
+        self.load_fixtures(commands)
+
+        if failed:
+            result = self.failed()
+            self.assertTrue(result['failed'], result)
+        else:
+            result = self.changed(changed)
+            self.assertEqual(result['changed'], changed, result)
+
+        if commands is not None:
+            if sort:
+                self.assertEqual(sorted(commands), sorted(result['updates']), result['updates'])
+            else:
+                self.assertEqual(commands, result['updates'], result['updates'])
+
+        return result
+
+    def failed(self):
+        with self.assertRaises(AnsibleFailJson) as exc:
+            self.module.main()
+
+        result = exc.exception.args[0]
+        self.assertTrue(result['failed'], result)
+        return result
+
+    def changed(self, changed=False):
+        with self.assertRaises(AnsibleExitJson) as exc:
+            self.module.main()
+
+        result = exc.exception.args[0]
+        self.assertEqual(result['changed'], changed, result)
+        return result
+
+    def load_fixtures(self, commands=None):
+        pass

test/units/modules/network/dellos10/fixtures/dellos10_config_config.cfg

@@ -0,0 +1,13 @@
+!
+hostname router
+!
+interface ethernet1/1/2
+ ip address 1.2.3.4/24
+ description test string
+!
+interface ethernet1/1/3
+ ip address 6.7.8.9/24
+ description test string
+ shutdown
+!
+

test/units/modules/network/dellos10/fixtures/dellos10_config_src.cfg

@@ -0,0 +1,12 @@
+!
+hostname foo
+!
+interface ethernet1/1/2
+ no ip address
+!
+interface ethernet1/1/3
+ ip address 6.7.8.9/24
+ description test string
+ shutdown
+!
+

test/units/modules/network/dellos10/fixtures/show_lldp_neighbors__display-xml

@@ -0,0 +1,855 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<rpc-reply>
+  <bulk>
+    <data>
+      <interface>
+        <name>ethernet1/1/1</name>
+        <type>ianaift:ethernetCsmacd</type>
+        <admin-status>up</admin-status>
+        <oper-status>up</oper-status>
+        <if-index>17305068</if-index>
+        <phys-address>14:18:77:09:ae:01</phys-address>
+        <speed>40000000000</speed>
+        <auto-negotiation>true</auto-negotiation>
+        <supported-speed>40GIGE</supported-speed>
+        <supported-autoneg>BOTH_SUPPORTED</supported-autoneg>
+        <fec>not-supported</fec>
+        <npu-speed>0MBPS</npu-speed>
+        <current-phys-address>14:18:77:09:ae:01</current-phys-address>
+        <last-change-time>44</last-change-time>
+        <last-counter-clear>17570800</last-counter-clear>
+        <load-interval>30</load-interval>
+        <mtu>1532</mtu>
+        <eee-state>n/a</eee-state>
+        <lldp-rem-neighbor-info>
+          <info>
+            <rem-lldp-time-mark>330300</rem-lldp-time-mark>
+            <rem-lldp-index>4</rem-lldp-index>
+            <dest-mac-addr-index>1</dest-mac-addr-index>
+            <rem-if-index>17305068</rem-if-index>
+            <rem-local-port-num>260</rem-local-port-num>
+            <rem-lldp-chassis-id>FBh3Ca4A
+</rem-lldp-chassis-id>
+            <rem-lldp-port-id>ZXRoZXJuZXQxLzEvMw==
+</rem-lldp-port-id>
+            <rem-lldp-chassis-id-subtype>mac-address</rem-lldp-chassis-id-subtype>
+            <rem-lldp-port-subtype>interface-alias</rem-lldp-port-subtype>
+            <rem-ttl>120</rem-ttl>
+            <rem-last-update-time>172395</rem-last-update-time>
+            <rem-info-valid-time>107</rem-info-valid-time>
+            <rem-system-desc>OS10</rem-system-desc>
+            <rem-port-desc>ethernet1/1/3</rem-port-desc>
+            <rem-system-name>os10</rem-system-name>
+            <rem-port-vlan-id>1</rem-port-vlan-id>
+            <rem-max-frame-size>1532</rem-max-frame-size>
+            <rem-agg-link-status>false</rem-agg-link-status>
+            <rem-sys-cap-supported>router bridge repeater</rem-sys-cap-supported>
+            <rem-sys-cap-enabled>router bridge repeater</rem-sys-cap-enabled>
+            <rem-remote-changes>true</rem-remote-changes>
+            <rem-too-many-neighbors>false</rem-too-many-neighbors>
+            <rem-dot3-auto-neg-supported>true</rem-dot3-auto-neg-supported>
+            <rem-dot3-auto-neg-enabled>true</rem-dot3-auto-neg-enabled>
+            <rem-dot3-auto-neg-adv-cap>b-1000base-t</rem-dot3-auto-neg-adv-cap>
+          </info>
+        </lldp-rem-neighbor-info>
+      </interface>
+      <interface>
+        <name>ethernet1/1/2</name>
+        <type>ianaift:ethernetCsmacd</type>
+        <admin-status>up</admin-status>
+        <oper-status>up</oper-status>
+        <if-index>17305094</if-index>
+        <phys-address>14:18:77:09:ae:05</phys-address>
+        <speed>40000000000</speed>
+        <auto-negotiation>true</auto-negotiation>
+        <supported-speed>40GIGE</supported-speed>
+        <supported-autoneg>BOTH_SUPPORTED</supported-autoneg>
+        <fec>not-supported</fec>
+        <npu-speed>0MBPS</npu-speed>
+        <current-phys-address>14:18:77:09:ae:05</current-phys-address>
+        <last-change-time>44</last-change-time>
+        <last-counter-clear>17570700</last-counter-clear>
+        <load-interval>30</load-interval>
+        <mtu>1532</mtu>
+        <eee-state>n/a</eee-state>
+        <lldp-rem-neighbor-info>
+          <info>
+            <rem-lldp-time-mark>330300</rem-lldp-time-mark>
+            <rem-lldp-index>5</rem-lldp-index>
+            <dest-mac-addr-index>1</dest-mac-addr-index>
+            <rem-if-index>17305094</rem-if-index>
+            <rem-local-port-num>264</rem-local-port-num>
+            <rem-lldp-chassis-id>FBh3Ca4A
+</rem-lldp-chassis-id>
+            <rem-lldp-port-id>ZXRoZXJuZXQxLzEvNA==
+</rem-lldp-port-id>
+            <rem-lldp-chassis-id-subtype>mac-address</rem-lldp-chassis-id-subtype>
+            <rem-lldp-port-subtype>interface-alias</rem-lldp-port-subtype>
+            <rem-ttl>120</rem-ttl>
+            <rem-last-update-time>172395</rem-last-update-time>
+            <rem-info-valid-time>107</rem-info-valid-time>
+            <rem-system-desc>OS10</rem-system-desc>
+            <rem-port-desc>ethernet1/1/4</rem-port-desc>
+            <rem-system-name>os10</rem-system-name>
+            <rem-port-vlan-id>1</rem-port-vlan-id>
+            <rem-max-frame-size>1532</rem-max-frame-size>
+            <rem-agg-link-status>false</rem-agg-link-status>
+            <rem-sys-cap-supported>router bridge repeater</rem-sys-cap-supported>
+            <rem-sys-cap-enabled>router bridge repeater</rem-sys-cap-enabled>
+            <rem-remote-changes>true</rem-remote-changes>
+            <rem-too-many-neighbors>false</rem-too-many-neighbors>
+            <rem-dot3-auto-neg-supported>true</rem-dot3-auto-neg-supported>
+            <rem-dot3-auto-neg-enabled>true</rem-dot3-auto-neg-enabled>
+            <rem-dot3-auto-neg-adv-cap>b-1000base-t</rem-dot3-auto-neg-adv-cap>
+          </info>
+        </lldp-rem-neighbor-info>
+      </interface>
+     <interface>
+        <name>ethernet1/1/3</name>
+        <type>ianaift:ethernetCsmacd</type>
+        <admin-status>up</admin-status>
+        <oper-status>up</oper-status>
+        <if-index>17305120</if-index>
+        <phys-address>14:18:77:09:ae:09</phys-address>
+        <speed>40000000000</speed>
+        <auto-negotiation>true</auto-negotiation>
+        <supported-speed>40GIGE</supported-speed>
+        <supported-autoneg>BOTH_SUPPORTED</supported-autoneg>
+        <fec>not-supported</fec>
+        <npu-speed>0MBPS</npu-speed>
+        <current-phys-address>14:18:77:09:ae:09</current-phys-address>
+        <last-change-time>44</last-change-time>
+        <last-counter-clear>17570700</last-counter-clear>
+        <load-interval>30</load-interval>
+        <mtu>1532</mtu>
+        <eee-state>n/a</eee-state>
+        <lldp-rem-neighbor-info>
+          <info>
+            <rem-lldp-time-mark>330300</rem-lldp-time-mark>
+            <rem-lldp-index>2</rem-lldp-index>
+            <dest-mac-addr-index>1</dest-mac-addr-index>
+            <rem-if-index>17305120</rem-if-index>
+            <rem-local-port-num>268</rem-local-port-num>
+            <rem-lldp-chassis-id>FBh3Ca4A
+</rem-lldp-chassis-id>
+            <rem-lldp-port-id>ZXRoZXJuZXQxLzEvMQ==
+</rem-lldp-port-id>
+            <rem-lldp-chassis-id-subtype>mac-address</rem-lldp-chassis-id-subtype>
+            <rem-lldp-port-subtype>interface-alias</rem-lldp-port-subtype>
+            <rem-ttl>120</rem-ttl>
+            <rem-last-update-time>172395</rem-last-update-time>
+            <rem-info-valid-time>107</rem-info-valid-time>
+            <rem-system-desc>OS10</rem-system-desc>
+            <rem-port-desc>ethernet1/1/1</rem-port-desc>
+            <rem-system-name>os10</rem-system-name>
+            <rem-port-vlan-id>1</rem-port-vlan-id>
+            <rem-max-frame-size>1532</rem-max-frame-size>
+            <rem-agg-link-status>false</rem-agg-link-status>
+            <rem-sys-cap-supported>router bridge repeater</rem-sys-cap-supported>
+            <rem-sys-cap-enabled>router bridge repeater</rem-sys-cap-enabled>
+            <rem-remote-changes>true</rem-remote-changes>
+            <rem-too-many-neighbors>false</rem-too-many-neighbors>
+            <rem-dot3-auto-neg-supported>true</rem-dot3-auto-neg-supported>
+            <rem-dot3-auto-neg-enabled>true</rem-dot3-auto-neg-enabled>
+            <rem-dot3-auto-neg-adv-cap>b-1000base-t</rem-dot3-auto-neg-adv-cap>
+          </info>
+        </lldp-rem-neighbor-info>
+      </interface>
+      <interface>
+        <name>ethernet1/1/4</name>
+        <type>ianaift:ethernetCsmacd</type>
+        <admin-status>up</admin-status>
+        <oper-status>up</oper-status>
+        <if-index>17305146</if-index>
+        <phys-address>14:18:77:09:ae:0d</phys-address>
+        <speed>40000000000</speed>
+        <auto-negotiation>true</auto-negotiation>
+        <supported-speed>40GIGE</supported-speed>
+        <supported-autoneg>BOTH_SUPPORTED</supported-autoneg>
+        <fec>not-supported</fec>
+        <npu-speed>0MBPS</npu-speed>
+        <current-phys-address>14:18:77:09:ae:0d</current-phys-address>
+        <last-change-time>44</last-change-time>
+        <last-counter-clear>17570700</last-counter-clear>
+        <load-interval>30</load-interval>
+        <mtu>1532</mtu>
+        <eee-state>n/a</eee-state>
+        <lldp-rem-neighbor-info>
+          <info>
+            <rem-lldp-time-mark>330300</rem-lldp-time-mark>
+            <rem-lldp-index>3</rem-lldp-index>
+            <dest-mac-addr-index>1</dest-mac-addr-index>
+            <rem-if-index>17305146</rem-if-index>
+            <rem-local-port-num>272</rem-local-port-num>
+            <rem-lldp-chassis-id>FBh3Ca4A
+</rem-lldp-chassis-id>
+            <rem-lldp-port-id>ZXRoZXJuZXQxLzEvMg==
+</rem-lldp-port-id>
+            <rem-lldp-chassis-id-subtype>mac-address</rem-lldp-chassis-id-subtype>
+            <rem-lldp-port-subtype>interface-alias</rem-lldp-port-subtype>
+            <rem-ttl>120</rem-ttl>
+            <rem-last-update-time>172395</rem-last-update-time>
+            <rem-info-valid-time>107</rem-info-valid-time>
+            <rem-system-desc>OS10</rem-system-desc>
+            <rem-port-desc>ethernet1/1/2</rem-port-desc>
+            <rem-system-name>os10</rem-system-name>
+            <rem-port-vlan-id>1</rem-port-vlan-id>
+            <rem-max-frame-size>1532</rem-max-frame-size>
+            <rem-agg-link-status>false</rem-agg-link-status>
+            <rem-sys-cap-supported>router bridge repeater</rem-sys-cap-supported>
+            <rem-sys-cap-enabled>router bridge repeater</rem-sys-cap-enabled>
+            <rem-remote-changes>true</rem-remote-changes>
+            <rem-too-many-neighbors>false</rem-too-many-neighbors>
+            <rem-dot3-auto-neg-supported>true</rem-dot3-auto-neg-supported>
+            <rem-dot3-auto-neg-enabled>true</rem-dot3-auto-neg-enabled>
+            <rem-dot3-auto-neg-adv-cap>b-1000base-t</rem-dot3-auto-neg-adv-cap>
+          </info>
+        </lldp-rem-neighbor-info>
+      </interface>
+      <interface>
+        <name>ethernet1/1/5</name>
+        <type>ianaift:ethernetCsmacd</type>
+        <admin-status>up</admin-status>
+        <oper-status>down</oper-status>
+        <if-index>17305172</if-index>
+        <phys-address>14:18:77:09:ae:11</phys-address>
+        <speed>0</speed>
+        <auto-negotiation>false</auto-negotiation>
+        <supported-speed>40GIGE</supported-speed>
+        <supported-autoneg>BOTH_SUPPORTED</supported-autoneg>
+        <fec>not-supported</fec>
+        <npu-speed>0MBPS</npu-speed>
+        <current-phys-address>14:18:77:09:ae:11</current-phys-address>
+        <last-change-time>36</last-change-time>
+        <last-counter-clear>17570700</last-counter-clear>
+        <load-interval>30</load-interval>
+        <mtu>1532</mtu>
+        <eee-state>n/a</eee-state>
+        <lldp-rem-neighbor-info/>
+      </interface>
+      <interface>
+        <name>ethernet1/1/6</name>
+        <type>ianaift:ethernetCsmacd</type>
+        <admin-status>up</admin-status>
+        <oper-status>down</oper-status>
+        <if-index>17305198</if-index>
+        <phys-address>14:18:77:09:ae:15</phys-address>
+        <speed>0</speed>
+        <auto-negotiation>false</auto-negotiation>
+        <supported-speed>40GIGE</supported-speed>
+        <supported-autoneg>BOTH_SUPPORTED</supported-autoneg>
+        <fec>not-supported</fec>
+        <npu-speed>0MBPS</npu-speed>
+        <current-phys-address>14:18:77:09:ae:15</current-phys-address>
+        <last-change-time>36</last-change-time>
+        <last-counter-clear>17570700</last-counter-clear>
+        <load-interval>30</load-interval>
+        <mtu>1532</mtu>
+        <eee-state>n/a</eee-state>
+        <lldp-rem-neighbor-info/>
+      </interface>
+      <interface>
+        <name>ethernet1/1/7</name>
+        <type>ianaift:ethernetCsmacd</type>
+        <admin-status>up</admin-status>
+        <oper-status>down</oper-status>
+        <if-index>17305224</if-index>
+        <phys-address>14:18:77:09:ae:19</phys-address>
+        <speed>0</speed>
+        <auto-negotiation>false</auto-negotiation>
+        <supported-speed>40GIGE</supported-speed>
+        <supported-autoneg>BOTH_SUPPORTED</supported-autoneg>
+        <fec>not-supported</fec>
+        <npu-speed>0MBPS</npu-speed>
+        <current-phys-address>14:18:77:09:ae:19</current-phys-address>
+        <last-change-time>36</last-change-time>
+        <last-counter-clear>17570700</last-counter-clear>
+        <load-interval>30</load-interval>
+        <mtu>1532</mtu>
+        <eee-state>n/a</eee-state>
+        <lldp-rem-neighbor-info/>
+      </interface>
+      <interface>
+        <name>ethernet1/1/8</name>
+        <type>ianaift:ethernetCsmacd</type>
+        <admin-status>up</admin-status>
+        <oper-status>down</oper-status>
+        <if-index>17305250</if-index>
+        <phys-address>14:18:77:09:ae:1d</phys-address>
+        <speed>0</speed>
+        <auto-negotiation>false</auto-negotiation>
+        <supported-speed>40GIGE</supported-speed>
+        <supported-autoneg>BOTH_SUPPORTED</supported-autoneg>
+        <fec>not-supported</fec>
+        <npu-speed>0MBPS</npu-speed>
+        <current-phys-address>14:18:77:09:ae:1d</current-phys-address>
+        <last-change-time>36</last-change-time>
+        <last-counter-clear>17570700</last-counter-clear>
+        <load-interval>30</load-interval>
+        <mtu>1532</mtu>
+        <eee-state>n/a</eee-state>
+        <lldp-rem-neighbor-info/>
+      </interface>
+      <interface>
+        <name>ethernet1/1/9</name>
+        <type>ianaift:ethernetCsmacd</type>
+        <admin-status>up</admin-status>
+        <oper-status>down</oper-status>
+        <if-index>17305276</if-index>
+        <phys-address>14:18:77:09:ae:21</phys-address>
+        <speed>0</speed>
+        <auto-negotiation>false</auto-negotiation>
+        <supported-speed>40GIGE</supported-speed>
+        <supported-autoneg>BOTH_SUPPORTED</supported-autoneg>
+        <fec>not-supported</fec>
+        <npu-speed>0MBPS</npu-speed>
+        <current-phys-address>14:18:77:09:ae:21</current-phys-address>
+        <last-change-time>36</last-change-time>
+        <last-counter-clear>17570700</last-counter-clear>
+        <load-interval>30</load-interval>
+        <mtu>1532</mtu>
+        <eee-state>n/a</eee-state>
+        <lldp-rem-neighbor-info/>
+      </interface>
+      <interface>
+        <name>ethernet1/1/10</name>
+        <type>ianaift:ethernetCsmacd</type>
+        <admin-status>up</admin-status>
+        <oper-status>down</oper-status>
+        <if-index>17305302</if-index>
+        <phys-address>14:18:77:09:ae:25</phys-address>
+        <speed>0</speed>
+        <auto-negotiation>false</auto-negotiation>
+        <supported-speed>40GIGE</supported-speed>
+        <supported-autoneg>BOTH_SUPPORTED</supported-autoneg>
+        <fec>not-supported</fec>
+        <npu-speed>0MBPS</npu-speed>
+        <current-phys-address>14:18:77:09:ae:25</current-phys-address>
+        <last-change-time>36</last-change-time>
+        <last-counter-clear>17570700</last-counter-clear>
+        <load-interval>30</load-interval>
+        <mtu>1532</mtu>
+        <eee-state>n/a</eee-state>
+        <lldp-rem-neighbor-info/>
+      </interface>
+      <interface>
+        <name>ethernet1/1/11</name>
+        <type>ianaift:ethernetCsmacd</type>
+        <admin-status>up</admin-status>
+        <oper-status>down</oper-status>
+        <if-index>17305328</if-index>
+        <phys-address>14:18:77:09:ae:29</phys-address>
+        <speed>0</speed>
+        <auto-negotiation>false</auto-negotiation>
+        <supported-speed>40GIGE</supported-speed>
+        <supported-autoneg>BOTH_SUPPORTED</supported-autoneg>
+        <fec>not-supported</fec>
+        <npu-speed>0MBPS</npu-speed>
+        <current-phys-address>14:18:77:09:ae:29</current-phys-address>
+        <last-change-time>37</last-change-time>
+        <last-counter-clear>17570600</last-counter-clear>
+        <load-interval>30</load-interval>
+        <mtu>1532</mtu>
+        <eee-state>n/a</eee-state>
+        <lldp-rem-neighbor-info/>
+      </interface>
+      <interface>
+        <name>ethernet1/1/12</name>
+        <type>ianaift:ethernetCsmacd</type>
+        <admin-status>up</admin-status>
+        <oper-status>down</oper-status>
+        <if-index>17305354</if-index>
+        <phys-address>14:18:77:09:ae:2d</phys-address>
+        <speed>0</speed>
+        <auto-negotiation>false</auto-negotiation>
+        <supported-speed>40GIGE</supported-speed>
+        <supported-autoneg>BOTH_SUPPORTED</supported-autoneg>
+        <fec>not-supported</fec>
+        <npu-speed>0MBPS</npu-speed>
+        <current-phys-address>14:18:77:09:ae:2d</current-phys-address>
+        <last-change-time>37</last-change-time>
+        <last-counter-clear>17570600</last-counter-clear>
+        <load-interval>30</load-interval>
+        <mtu>1532</mtu>
+        <eee-state>n/a</eee-state>
+        <lldp-rem-neighbor-info/>
+      </interface>
+      <interface>
+        <name>ethernet1/1/13</name>
+        <type>ianaift:ethernetCsmacd</type>
+        <admin-status>up</admin-status>
+        <oper-status>down</oper-status>
+        <if-index>17305380</if-index>
+        <phys-address>14:18:77:09:ae:31</phys-address>
+        <speed>0</speed>
+        <auto-negotiation>false</auto-negotiation>
+        <supported-speed>40GIGE</supported-speed>
+        <supported-autoneg>BOTH_SUPPORTED</supported-autoneg>
+        <fec>not-supported</fec>
+        <npu-speed>0MBPS</npu-speed>
+        <current-phys-address>14:18:77:09:ae:31</current-phys-address>
+        <last-change-time>37</last-change-time>
+        <last-counter-clear>17570600</last-counter-clear>
+        <load-interval>30</load-interval>
+        <mtu>1532</mtu>
+        <eee-state>n/a</eee-state>
+        <lldp-rem-neighbor-info/>
+      </interface>
+      <interface>
+        <name>ethernet1/1/14</name>
+        <type>ianaift:ethernetCsmacd</type>
+        <admin-status>up</admin-status>
+        <oper-status>down</oper-status>
+        <if-index>17305406</if-index>
+        <phys-address>14:18:77:09:ae:32</phys-address>
+        <speed>0</speed>
+        <auto-negotiation>false</auto-negotiation>
+        <supported-speed>40GIGE</supported-speed>
+        <supported-autoneg>BOTH_SUPPORTED</supported-autoneg>
+        <fec>not-supported</fec>
+        <npu-speed>0MBPS</npu-speed>
+        <current-phys-address>14:18:77:09:ae:32</current-phys-address>
+        <last-change-time>37</last-change-time>
+        <last-counter-clear>17570600</last-counter-clear>
+        <load-interval>30</load-interval>
+        <mtu>1532</mtu>
+        <eee-state>n/a</eee-state>
+        <lldp-rem-neighbor-info/>
+      </interface>
+      <interface>
+        <name>ethernet1/1/15</name>
+        <type>ianaift:ethernetCsmacd</type>
+        <admin-status>up</admin-status>
+        <oper-status>down</oper-status>
+        <if-index>17305432</if-index>
+        <phys-address>14:18:77:09:ae:33</phys-address>
+        <speed>0</speed>
+        <auto-negotiation>false</auto-negotiation>
+        <supported-speed>40GIGE</supported-speed>
+        <supported-autoneg>BOTH_SUPPORTED</supported-autoneg>
+        <fec>not-supported</fec>
+        <npu-speed>0MBPS</npu-speed>
+        <current-phys-address>14:18:77:09:ae:33</current-phys-address>
+        <last-change-time>37</last-change-time>
+        <last-counter-clear>17570600</last-counter-clear>
+        <load-interval>30</load-interval>
+        <mtu>1532</mtu>
+        <eee-state>n/a</eee-state>
+        <lldp-rem-neighbor-info/>
+      </interface>
+      <interface>
+        <name>ethernet1/1/16</name>
+        <type>ianaift:ethernetCsmacd</type>
+        <admin-status>up</admin-status>
+        <oper-status>down</oper-status>
+        <if-index>17305458</if-index>
+        <phys-address>14:18:77:09:ae:34</phys-address>
+        <speed>0</speed>
+        <auto-negotiation>false</auto-negotiation>
+        <supported-speed>40GIGE</supported-speed>
+        <supported-autoneg>BOTH_SUPPORTED</supported-autoneg>
+        <fec>not-supported</fec>
+        <npu-speed>0MBPS</npu-speed>
+        <current-phys-address>14:18:77:09:ae:34</current-phys-address>
+        <last-change-time>37</last-change-time>
+        <last-counter-clear>17570600</last-counter-clear>
+        <load-interval>30</load-interval>
+        <mtu>1532</mtu>
+        <eee-state>n/a</eee-state>
+        <lldp-rem-neighbor-info/>
+      </interface>
+      <interface>
+        <name>ethernet1/1/17</name>
+        <type>ianaift:ethernetCsmacd</type>
+        <admin-status>up</admin-status>
+        <oper-status>down</oper-status>
+        <if-index>17305484</if-index>
+        <phys-address>14:18:77:09:ae:35</phys-address>
+        <speed>0</speed>
+        <auto-negotiation>false</auto-negotiation>
+        <supported-speed>40GIGE</supported-speed>
+        <supported-autoneg>BOTH_SUPPORTED</supported-autoneg>
+        <fec>not-supported</fec>
+        <npu-speed>0MBPS</npu-speed>
+        <current-phys-address>14:18:77:09:ae:35</current-phys-address>
+        <last-change-time>37</last-change-time>
+        <last-counter-clear>17570600</last-counter-clear>
+        <load-interval>30</load-interval>
+        <mtu>1532</mtu>
+        <eee-state>n/a</eee-state>
+        <lldp-rem-neighbor-info/>
+      </interface>
+      <interface>
+        <name>ethernet1/1/18</name>
+        <type>ianaift:ethernetCsmacd</type>
+        <admin-status>up</admin-status>
+        <oper-status>down</oper-status>
+        <if-index>17305510</if-index>
+        <phys-address>14:18:77:09:ae:39</phys-address>
+        <speed>0</speed>
+        <auto-negotiation>false</auto-negotiation>
+        <supported-speed>40GIGE</supported-speed>
+        <supported-autoneg>BOTH_SUPPORTED</supported-autoneg>
+        <fec>not-supported</fec>
+        <npu-speed>0MBPS</npu-speed>
+        <current-phys-address>14:18:77:09:ae:39</current-phys-address>
+        <last-change-time>37</last-change-time>
+        <last-counter-clear>17570600</last-counter-clear>
+        <load-interval>30</load-interval>
+        <mtu>1532</mtu>
+        <eee-state>n/a</eee-state>
+        <lldp-rem-neighbor-info/>
+      </interface>
+      <interface>
+        <name>ethernet1/1/19</name>
+        <type>ianaift:ethernetCsmacd</type>
+        <admin-status>up</admin-status>
+        <oper-status>down</oper-status>
+        <if-index>17305536</if-index>
+        <phys-address>14:18:77:09:ae:3d</phys-address>
+        <speed>0</speed>
+        <auto-negotiation>false</auto-negotiation>
+        <supported-speed>40GIGE</supported-speed>
+        <supported-autoneg>BOTH_SUPPORTED</supported-autoneg>
+        <fec>not-supported</fec>
+        <npu-speed>0MBPS</npu-speed>
+        <current-phys-address>14:18:77:09:ae:3d</current-phys-address>
+        <last-change-time>37</last-change-time>
+        <last-counter-clear>17570600</last-counter-clear>
+        <load-interval>30</load-interval>
+        <mtu>1532</mtu>
+        <eee-state>n/a</eee-state>
+        <lldp-rem-neighbor-info/>
+      </interface>
+      <interface>
+        <name>ethernet1/1/20</name>
+        <type>ianaift:ethernetCsmacd</type>
+        <admin-status>up</admin-status>
+        <oper-status>down</oper-status>
+        <if-index>17305562</if-index>
+        <phys-address>14:18:77:09:ae:41</phys-address>
+        <speed>0</speed>
+        <auto-negotiation>false</auto-negotiation>
+        <supported-speed>40GIGE</supported-speed>
+        <supported-autoneg>BOTH_SUPPORTED</supported-autoneg>
+        <fec>not-supported</fec>
+        <npu-speed>0MBPS</npu-speed>
+        <current-phys-address>14:18:77:09:ae:41</current-phys-address>
+        <last-change-time>37</last-change-time>
+        <last-counter-clear>17570600</last-counter-clear>
+        <load-interval>30</load-interval>
+        <mtu>1532</mtu>
+        <eee-state>n/a</eee-state>
+        <lldp-rem-neighbor-info/>
+      </interface>
+      <interface>
+        <name>ethernet1/1/21</name>
+        <type>ianaift:ethernetCsmacd</type>
+        <admin-status>up</admin-status>
+        <oper-status>down</oper-status>
+        <if-index>17305588</if-index>
+        <phys-address>14:18:77:09:ae:45</phys-address>
+        <speed>0</speed>
+        <auto-negotiation>false</auto-negotiation>
+        <supported-speed>40GIGE</supported-speed>
+        <supported-autoneg>BOTH_SUPPORTED</supported-autoneg>
+        <fec>not-supported</fec>
+        <npu-speed>0MBPS</npu-speed>
+        <current-phys-address>14:18:77:09:ae:45</current-phys-address>
+        <last-change-time>37</last-change-time>
+        <last-counter-clear>17570600</last-counter-clear>
+        <load-interval>30</load-interval>
+        <mtu>1532</mtu>
+        <eee-state>n/a</eee-state>
+        <lldp-rem-neighbor-info/>
+      </interface>
+      <interface>
+        <name>ethernet1/1/22</name>
+        <type>ianaift:ethernetCsmacd</type>
+        <admin-status>up</admin-status>
+        <oper-status>down</oper-status>
+        <if-index>17305614</if-index>
+        <phys-address>14:18:77:09:ae:49</phys-address>
+        <speed>0</speed>
+        <auto-negotiation>false</auto-negotiation>
+        <supported-speed>40GIGE</supported-speed>
+        <supported-autoneg>BOTH_SUPPORTED</supported-autoneg>
+        <fec>not-supported</fec>
+        <npu-speed>0MBPS</npu-speed>
+        <current-phys-address>14:18:77:09:ae:49</current-phys-address>
+        <last-change-time>37</last-change-time>
+        <last-counter-clear>17570600</last-counter-clear>
+        <load-interval>30</load-interval>
+        <mtu>1532</mtu>
+        <eee-state>n/a</eee-state>
+        <lldp-rem-neighbor-info/>
+      </interface>
+      <interface>
+        <name>ethernet1/1/23</name>
+        <type>ianaift:ethernetCsmacd</type>
+        <admin-status>up</admin-status>
+        <oper-status>down</oper-status>
+        <if-index>17305640</if-index>
+        <phys-address>14:18:77:09:ae:4d</phys-address>
+        <speed>0</speed>
+        <auto-negotiation>false</auto-negotiation>
+        <supported-speed>40GIGE</supported-speed>
+        <supported-autoneg>BOTH_SUPPORTED</supported-autoneg>
+        <fec>not-supported</fec>
+        <npu-speed>0MBPS</npu-speed>
+        <current-phys-address>14:18:77:09:ae:4d</current-phys-address>
+        <last-change-time>37</last-change-time>
+        <last-counter-clear>17570500</last-counter-clear>
+        <load-interval>30</load-interval>
+        <mtu>1532</mtu>
+        <eee-state>n/a</eee-state>
+        <lldp-rem-neighbor-info/>
+      </interface>
+      <interface>
+        <name>ethernet1/1/24</name>
+        <type>ianaift:ethernetCsmacd</type>
+        <admin-status>up</admin-status>
+        <oper-status>down</oper-status>
+        <if-index>17305666</if-index>
+        <phys-address>14:18:77:09:ae:51</phys-address>
+        <speed>0</speed>
+        <auto-negotiation>false</auto-negotiation>
+        <supported-speed>40GIGE</supported-speed>
+        <supported-autoneg>BOTH_SUPPORTED</supported-autoneg>
+        <fec>not-supported</fec>
+        <npu-speed>0MBPS</npu-speed>
+        <current-phys-address>14:18:77:09:ae:51</current-phys-address>
+        <last-change-time>38</last-change-time>
+        <last-counter-clear>17570500</last-counter-clear>
+        <load-interval>30</load-interval>
+        <mtu>1532</mtu>
+        <eee-state>n/a</eee-state>
+        <lldp-rem-neighbor-info/>
+      </interface>
+      <interface>
+        <name>ethernet1/1/25</name>
+        <type>ianaift:ethernetCsmacd</type>
+        <admin-status>up</admin-status>
+        <oper-status>down</oper-status>
+        <if-index>17305692</if-index>
+        <phys-address>14:18:77:09:ae:55</phys-address>
+        <speed>0</speed>
+        <auto-negotiation>false</auto-negotiation>
+        <supported-speed>40GIGE</supported-speed>
+        <supported-autoneg>BOTH_SUPPORTED</supported-autoneg>
+        <fec>not-supported</fec>
+        <npu-speed>0MBPS</npu-speed>
+        <current-phys-address>14:18:77:09:ae:55</current-phys-address>
+        <last-change-time>38</last-change-time>
+        <last-counter-clear>17570500</last-counter-clear>
+        <load-interval>30</load-interval>
+        <mtu>1532</mtu>
+        <eee-state>n/a</eee-state>
+        <lldp-rem-neighbor-info/>
+      </interface>
+      <interface>
+        <name>ethernet1/1/26</name>
+        <type>ianaift:ethernetCsmacd</type>
+        <admin-status>up</admin-status>
+        <oper-status>down</oper-status>
+        <if-index>17305718</if-index>
+        <phys-address>14:18:77:09:ae:59</phys-address>
+        <speed>0</speed>
+        <auto-negotiation>false</auto-negotiation>
+        <supported-speed>40GIGE</supported-speed>
+        <supported-autoneg>BOTH_SUPPORTED</supported-autoneg>
+        <fec>not-supported</fec>
+        <npu-speed>0MBPS</npu-speed>
+        <current-phys-address>14:18:77:09:ae:59</current-phys-address>
+        <last-change-time>38</last-change-time>
+        <last-counter-clear>17570500</last-counter-clear>
+        <load-interval>30</load-interval>
+        <mtu>1532</mtu>
+        <eee-state>n/a</eee-state>
+        <lldp-rem-neighbor-info/>
+      </interface>
+      <interface>
+        <name>ethernet1/1/27</name>
+        <type>ianaift:ethernetCsmacd</type>
+        <admin-status>up</admin-status>
+        <oper-status>down</oper-status>
+        <if-index>17305744</if-index>
+        <phys-address>14:18:77:09:ae:5d</phys-address>
+        <speed>0</speed>
+        <auto-negotiation>false</auto-negotiation>
+        <supported-speed>40GIGE</supported-speed>
+        <supported-autoneg>BOTH_SUPPORTED</supported-autoneg>
+        <fec>not-supported</fec>
+        <npu-speed>0MBPS</npu-speed>
+        <current-phys-address>14:18:77:09:ae:5d</current-phys-address>
+        <last-change-time>38</last-change-time>
+        <last-counter-clear>17570500</last-counter-clear>
+        <load-interval>30</load-interval>
+        <mtu>1532</mtu>
+        <eee-state>n/a</eee-state>
+        <lldp-rem-neighbor-info/>
+      </interface>
+      <interface>
+        <name>ethernet1/1/28</name>
+        <type>ianaift:ethernetCsmacd</type>
+        <admin-status>up</admin-status>
+        <oper-status>down</oper-status>
+        <if-index>17305770</if-index>
+        <phys-address>14:18:77:09:ae:61</phys-address>
+        <speed>0</speed>
+        <auto-negotiation>false</auto-negotiation>
+        <supported-speed>40GIGE</supported-speed>
+        <supported-autoneg>BOTH_SUPPORTED</supported-autoneg>
+        <fec>not-supported</fec>
+        <npu-speed>0MBPS</npu-speed>
+        <current-phys-address>14:18:77:09:ae:61</current-phys-address>
+        <last-change-time>38</last-change-time>
+        <last-counter-clear>17570500</last-counter-clear>
+        <load-interval>30</load-interval>
+        <mtu>1532</mtu>
+        <eee-state>n/a</eee-state>
+        <lldp-rem-neighbor-info/>
+      </interface>
+      <interface>
+        <name>ethernet1/1/29</name>
+        <type>ianaift:ethernetCsmacd</type>
+        <admin-status>up</admin-status>
+        <oper-status>down</oper-status>
+        <if-index>17305796</if-index>
+        <phys-address>14:18:77:09:ae:65</phys-address>
+        <speed>0</speed>
+        <auto-negotiation>false</auto-negotiation>
+        <supported-speed>40GIGE</supported-speed>
+        <supported-autoneg>BOTH_SUPPORTED</supported-autoneg>
+        <fec>not-supported</fec>
+        <npu-speed>0MBPS</npu-speed>
+        <current-phys-address>14:18:77:09:ae:65</current-phys-address>
+        <last-change-time>38</last-change-time>
+        <last-counter-clear>17570500</last-counter-clear>
+        <load-interval>30</load-interval>
+        <mtu>1532</mtu>
+        <eee-state>n/a</eee-state>
+        <lldp-rem-neighbor-info/>
+      </interface>
+      <interface>
+        <name>ethernet1/1/30</name>
+        <type>ianaift:ethernetCsmacd</type>
+        <admin-status>up</admin-status>
+        <oper-status>down</oper-status>
+        <if-index>17305822</if-index>
+        <phys-address>14:18:77:09:ae:66</phys-address>
+        <speed>0</speed>
+        <auto-negotiation>false</auto-negotiation>
+        <supported-speed>40GIGE</supported-speed>
+        <supported-autoneg>BOTH_SUPPORTED</supported-autoneg>
+        <fec>not-supported</fec>
+        <npu-speed>0MBPS</npu-speed>
+        <current-phys-address>14:18:77:09:ae:66</current-phys-address>
+        <last-change-time>38</last-change-time>
+        <last-counter-clear>17570500</last-counter-clear>
+        <load-interval>30</load-interval>
+        <mtu>1532</mtu>
+        <eee-state>n/a</eee-state>
+        <lldp-rem-neighbor-info/>
+      </interface>
+      <interface>
+        <name>ethernet1/1/31</name>
+        <type>ianaift:ethernetCsmacd</type>
+        <admin-status>up</admin-status>
+        <oper-status>down</oper-status>
+        <if-index>17305848</if-index>
+        <phys-address>14:18:77:09:ae:67</phys-address>
+        <speed>0</speed>
+        <auto-negotiation>false</auto-negotiation>
+        <supported-speed>40GIGE</supported-speed>
+        <supported-autoneg>BOTH_SUPPORTED</supported-autoneg>
+        <fec>not-supported</fec>
+        <npu-speed>0MBPS</npu-speed>
+        <current-phys-address>14:18:77:09:ae:67</current-phys-address>
+        <last-change-time>38</last-change-time>
+        <last-counter-clear>17570500</last-counter-clear>
+        <load-interval>30</load-interval>
+        <mtu>1532</mtu>
+        <eee-state>n/a</eee-state>
+        <lldp-rem-neighbor-info/>
+      </interface>
+      <interface>
+        <name>ethernet1/1/32</name>
+        <type>ianaift:ethernetCsmacd</type>
+        <admin-status>up</admin-status>
+        <oper-status>down</oper-status>
+        <if-index>17305874</if-index>
+        <phys-address>14:18:77:09:ae:68</phys-address>
+        <speed>0</speed>
+        <auto-negotiation>false</auto-negotiation>
+        <supported-speed>40GIGE</supported-speed>
+        <supported-autoneg>BOTH_SUPPORTED</supported-autoneg>
+        <fec>not-supported</fec>
+        <npu-speed>0MBPS</npu-speed>
+        <current-phys-address>14:18:77:09:ae:68</current-phys-address>
+        <last-change-time>38</last-change-time>
+        <last-counter-clear>17570500</last-counter-clear>
+        <load-interval>30</load-interval>
+        <mtu>1532</mtu>
+        <eee-state>n/a</eee-state>
+        <lldp-rem-neighbor-info/>
+      </interface>
+      <interface>
+        <name>mgmt1/1/1</name>
+        <type>base-if:management</type>
+        <admin-status>up</admin-status>
+        <oper-status>up</oper-status>
+        <if-index>35454736</if-index>
+        <phys-address>00:a0:c9:00:00:00</phys-address>
+        <speed>1000000000</speed>
+        <auto-negotiation>false</auto-negotiation>
+        <supported-speed>10MBPS</supported-speed>
+        <supported-speed>100MBPS</supported-speed>
+        <supported-speed>1GIGE</supported-speed>
+        <supported-autoneg>NOT_SUPPORTED</supported-autoneg>
+        <fec>not-supported</fec>
+        <bind-ni-name>default</bind-ni-name>
+        <current-phys-address>00:a0:c9:00:00:00</current-phys-address>
+        <last-change-time>38</last-change-time>
+        <last-counter-clear>17570400</last-counter-clear>
+        <load-interval>30</load-interval>
+        <mtu>1532</mtu>
+        <lldp-rem-neighbor-info>
+          <info>
+            <rem-lldp-time-mark>3100</rem-lldp-time-mark>
+            <rem-lldp-index>1</rem-lldp-index>
+            <dest-mac-addr-index>1</dest-mac-addr-index>
+            <rem-if-index>35454736</rem-if-index>
+            <rem-local-port-num>4</rem-local-port-num>
+            <rem-lldp-chassis-id>kLEc9C9t
+</rem-lldp-chassis-id>
+            <rem-lldp-port-id>VGVuR2lnYWJpdEV0aGVybmV0IDAvMA==
+</rem-lldp-port-id>
+            <rem-lldp-chassis-id-subtype>mac-address</rem-lldp-chassis-id-subtype>
+            <rem-lldp-port-subtype>interface-name</rem-lldp-port-subtype>
+            <rem-ttl>20</rem-ttl>
+            <rem-last-update-time>175667</rem-last-update-time>
+            <rem-info-valid-time>15</rem-info-valid-time>
+            <rem-system-desc>Dell Real Time Operating System Software. Dell Operating System Version: 2.0. Dell Application Software Version: 9.11(2.0) Copyright (c) 1999-2017Dell Inc. All Rights Reserved.Build Time: Tue Apr 25 21:22:59 2017</rem-system-desc>
+            <rem-port-desc>TenGigabitEthernet 0/0</rem-port-desc>
+            <rem-system-name>swlab1-maa-tor-A2</rem-system-name>
+            <rem-port-vlan-id>148</rem-port-vlan-id>
+            <rem-max-frame-size>0</rem-max-frame-size>
+            <rem-agg-link-status>false</rem-agg-link-status>
+            <rem-sys-cap-supported>router bridge repeater</rem-sys-cap-supported>
+            <rem-sys-cap-enabled>router bridge repeater</rem-sys-cap-enabled>
+            <rem-remote-changes>false</rem-remote-changes>
+            <rem-too-many-neighbors>false</rem-too-many-neighbors>
+            <rem-dot3-auto-neg-supported>false</rem-dot3-auto-neg-supported>
+            <rem-dot3-auto-neg-enabled>false</rem-dot3-auto-neg-enabled>
+            <rem-dot3-auto-neg-adv-cap/>
+          </info>
+        </lldp-rem-neighbor-info>
+      </interface>
+    </data>
+    <last-keys>
+      <name>mgmt1/1/1</name>
+    </last-keys>
+  </bulk>
+</rpc-reply>
+

test/units/modules/network/dellos10/fixtures/show_processes_node-id_1__grep_Mem:

@@ -0,0 +1 @@
+KiB Mem:   8127144 total,  2297272 used,  5829872 free,   137360 buffers

test/units/modules/network/dellos10/fixtures/show_running-config

@@ -0,0 +1,252 @@
+! Version 10.4.0E(R1)
+! Last configuration change at Jan  11 12:26:08 2018
+!
+snmp-server contact http://www.dell.com/support
+snmp-server host 1.1.1.1 traps version 1 c4 udp-port 5
+snmp-server host 1.1.1.1 traps version 2c c1 udp-port 4
+snmp-server host 2.2.2.2 traps version 1 c3 udp-port 162
+ip community-list expanded commex deny aaa
+ip community-list standard commstd deny internet
+ip community-list standard commstd permit no-advertise
+ip as-path access-list accesslist deny abc
+ip as-path access-list accesslist deny www
+ip extcommunity-list expanded extcommex deny aaa
+ip extcommunity-list standard extcommstd deny rt 22:33
+ip extcommunity-list standard extcommstd permit soo 22:33
+hostname os10
+interface breakout 1/1/1 map 40g-1x
+interface breakout 1/1/2 map 40g-1x
+interface breakout 1/1/3 map 40g-1x
+interface breakout 1/1/4 map 40g-1x
+interface breakout 1/1/5 map 40g-1x
+interface breakout 1/1/6 map 40g-1x
+interface breakout 1/1/7 map 40g-1x
+interface breakout 1/1/8 map 40g-1x
+interface breakout 1/1/9 map 40g-1x
+interface breakout 1/1/10 map 40g-1x
+interface breakout 1/1/11 map 40g-1x
+interface breakout 1/1/12 map 40g-1x
+interface breakout 1/1/13 map 40g-1x
+interface breakout 1/1/14 map 40g-1x
+interface breakout 1/1/15 map 40g-1x
+interface breakout 1/1/16 map 40g-1x
+interface breakout 1/1/17 map 40g-1x
+interface breakout 1/1/18 map 40g-1x
+interface breakout 1/1/19 map 40g-1x
+interface breakout 1/1/20 map 40g-1x
+interface breakout 1/1/21 map 40g-1x
+interface breakout 1/1/22 map 40g-1x
+interface breakout 1/1/23 map 40g-1x
+interface breakout 1/1/24 map 40g-1x
+interface breakout 1/1/25 map 40g-1x
+interface breakout 1/1/26 map 40g-1x
+interface breakout 1/1/27 map 40g-1x
+interface breakout 1/1/28 map 40g-1x
+interface breakout 1/1/29 map 40g-1x
+interface breakout 1/1/30 map 40g-1x
+interface breakout 1/1/31 map 40g-1x
+interface breakout 1/1/32 map 40g-1x
+username admin password $6$q9QBeYjZ$jfxzVqGhkxX3smxJSH9DDz7/3OJc6m5wjF8nnLD7/VKx8SloIhp4NoGZs0I/UNwh8WVuxwfd9q4pWIgNs5BKH. role sysadmin
+aaa authentication local
+iscsi target port 860
+iscsi target port 3260
+hash-algorithm ecmp xor
+logging console disable
+vrrp delay reload 5
+vrrp version 3
+spanning-tree mode rstp
+!
+interface vlan1
+ no shutdown
+!
+interface vlan100
+ no shutdown
+!
+interface port-channel12
+ no shutdown
+ switchport access vlan 1
+ vlt-port-channel 13
+!
+interface ethernet1/1/1
+ no shutdown
+ switchport access vlan 1
+!
+interface ethernet1/1/2
+ no shutdown
+ no switchport
+!
+interface ethernet1/1/3
+ no shutdown
+ switchport access vlan 1
+!
+interface ethernet1/1/4
+ no shutdown
+ switchport access vlan 1
+!
+interface ethernet1/1/5
+ no shutdown
+ switchport access vlan 1
+!
+interface ethernet1/1/6
+ no shutdown
+ switchport access vlan 1
+!
+interface ethernet1/1/7
+ no shutdown
+ switchport access vlan 1
+!
+interface ethernet1/1/8
+ no shutdown
+ no switchport
+!
+interface ethernet1/1/9
+ no shutdown
+ switchport access vlan 1
+!
+interface ethernet1/1/10
+ no shutdown
+ switchport access vlan 1
+!
+interface ethernet1/1/11
+ no shutdown
+ switchport access vlan 1
+!
+interface ethernet1/1/12
+ no shutdown
+ no switchport
+!
+interface ethernet1/1/13
+ no shutdown
+ no switchport
+ !
+ vrrp-group 4
+  priority 120
+  track 3 priority-cost 25
+  virtual-address 4.1.1.1
+  virtual-address 4.1.1.2
+  advertise-interval centisecs 200
+  no preempt
+ !
+ vrrp-ipv6-group 2
+  priority 120
+  track 3 priority-cost 25
+  virtual-address 3001:4828:5808:ffa3::9
+  virtual-address fe80::10
+  advertise-interval centisecs 200
+  no preempt
+!
+interface ethernet1/1/14
+ no shutdown
+ no switchport
+!
+interface ethernet1/1/15
+ no shutdown
+ no switchport
+!
+interface ethernet1/1/16
+ no shutdown
+ no switchport
+!
+interface ethernet1/1/17
+ no shutdown
+ no switchport
+!
+interface ethernet1/1/18
+ no shutdown
+ no switchport
+!
+interface ethernet1/1/19
+ no shutdown
+ no switchport
+!
+interface ethernet1/1/20
+ no shutdown
+ switchport access vlan 1
+!
+interface ethernet1/1/21
+ no shutdown
+ switchport access vlan 1
+!
+interface ethernet1/1/22
+ no shutdown
+ switchport access vlan 1
+!
+interface ethernet1/1/23
+ no shutdown
+ switchport access vlan 1
+!
+interface ethernet1/1/24
+ no shutdown
+ switchport access vlan 1
+!
+interface ethernet1/1/25
+ no shutdown
+ switchport access vlan 1
+!
+interface ethernet1/1/26
+ no shutdown
+ switchport access vlan 1
+!
+interface ethernet1/1/27
+ no shutdown
+ switchport access vlan 1
+!
+interface ethernet1/1/28
+ no shutdown
+ switchport access vlan 1
+!
+interface ethernet1/1/29
+ no shutdown
+ switchport access vlan 1
+!
+interface ethernet1/1/30
+ no shutdown
+ switchport access vlan 1
+!
+interface ethernet1/1/31
+ no shutdown
+ switchport access vlan 1
+!
+interface ethernet1/1/32
+ no shutdown
+ switchport access vlan 1
+!
+interface mgmt1/1/1
+ no shutdown
+ ip address 10.16.148.144/16
+ ipv6 address autoconfig
+!
+route-map test permit 1
+ match ip address prefix-list testprefix
+ match ip address testaccess
+ continue 20
+ set comm-list commstd delete
+ set comm-list commex add
+ set community internet
+ set extcommunity rt 22:33
+ set extcomm-list extcommstd delete
+ set extcomm-list extcommex add
+ set ip next-hop 10.1.1.1 track-id 3
+ set local-preference 1200
+ set metric + 30
+ set metric-type internal
+ set origin igp
+ set weight 50
+!
+route-map test deny 10
+ match ip address prefix-list testprefix
+ match ip address testaccess
+ set ip next-hop 10.1.1.1 track-id 3
+!
+support-assist
+!
+policy-map type application policy-iscsi
+!
+class-map type application class-iscsi
+!
+class-map type qos class-trust
+!
+vlt-domain 1
+ discovery-interface ethernet1/1/12
+ vlt-mac aa:aa:aa:aa:aa:aa
+

test/units/modules/network/dellos10/fixtures/show_system__display-xml

@@ -0,0 +1,194 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<rpc-reply>
+  <data>
+    <system>
+      <node>
+        <node-id>1</node-id>
+        <node-mac>14:18:77:09:ae:00</node-mac>
+        <number-of-mac-addresses>384</number-of-mac-addresses>
+        <mfg-info>
+          <vendor-name>DELL</vendor-name>
+          <product-name>S6010-ON</product-name>
+          <hw-version>X01</hw-version>
+          <platform-name>x86_64-dell_s6010_c2538-r0</platform-name>
+          <ppid>0088</ppid>
+          <service-tag/>
+          <service-code/>
+        </mfg-info>
+        <unit>
+          <unit-id>1</unit-id>
+          <current-unit-model>S6010</current-unit-model>
+          <provisioned-unit-model>S6010</provisioned-unit-model>
+          <unit-state>up</unit-state>
+          <software-version>10.4.0E(R1)</software-version>
+          <port-info>32x40GbE</port-info>
+          <mfg-info>
+            <vendor-name>DELL</vendor-name>
+            <product-name>S6010-ON</product-name>
+            <hw-version>X01</hw-version>
+            <platform-name>x86_64-dell_s6010_c2538-r0</platform-name>
+            <ppid>0088</ppid>
+            <part-number>083R0P</part-number>
+            <service-tag/>
+            <service-code/>
+          </mfg-info>
+          <down-reason>user-triggered</down-reason>
+          <descr>S6010-ON 32x40GbE QSFP+ Interface Module</descr>
+          <beacon_led_state>false</beacon_led_state>
+          <system-identifier-id>1</system-identifier-id>
+          <firmware>
+            <firmware-name>BIOS</firmware-name>
+            <firmware-version>3.26.0.1</firmware-version>
+          </firmware>
+          <firmware>
+            <firmware-name>System CPLD</firmware-name>
+            <firmware-version>10</firmware-version>
+          </firmware>
+          <firmware>
+            <firmware-name>Master CPLD</firmware-name>
+            <firmware-version>9</firmware-version>
+          </firmware>
+          <firmware>
+            <firmware-name>Slave CPLD</firmware-name>
+            <firmware-version>4</firmware-version>
+          </firmware>
+        </unit>
+        <power-supply>
+          <psu-id>1</psu-id>
+          <status>fail</status>
+          <mfg-info/>
+        </power-supply>
+        <power-supply>
+          <psu-id>2</psu-id>
+          <status>up</status>
+          <power-type>UNKNOWN</power-type>
+          <fan-info>
+            <fan-id>1</fan-id>
+            <fan-status>fail</fan-status>
+            <fan-speed-rpm>1920</fan-speed-rpm>
+          </fan-info>
+          <air-flow>NORMAL</air-flow>
+          <mfg-info>
+            <vendor-name/>
+            <product-name/>
+            <hw-version/>
+            <platform-name/>
+            <ppid/>
+            <part-number/>
+            <service-tag/>
+            <service-code/>
+          </mfg-info>
+        </power-supply>
+        <fan-tray>
+          <fan-tray-id>1</fan-tray-id>
+          <status>up</status>
+          <fan-info>
+            <fan-id>1</fan-id>
+            <fan-status>up</fan-status>
+            <fan-speed-rpm>22090</fan-speed-rpm>
+          </fan-info>
+          <air-flow>NORMAL</air-flow>
+          <mfg-info>
+            <vendor-name/>
+            <product-name/>
+            <hw-version>F01</hw-version>
+            <platform-name/>
+            <ppid>CN123456FAN100589021</ppid>
+            <part-number>P1FAN1</part-number>
+            <service-tag/>
+            <service-code/>
+          </mfg-info>
+        </fan-tray>
+        <fan-tray>
+          <fan-tray-id>2</fan-tray-id>
+          <status>up</status>
+          <fan-info>
+            <fan-id>1</fan-id>
+            <fan-status>up</fan-status>
+            <fan-speed-rpm>22215</fan-speed-rpm>
+          </fan-info>
+          <air-flow>NORMAL</air-flow>
+          <mfg-info>
+            <vendor-name/>
+            <product-name/>
+            <hw-version>F02</hw-version>
+            <platform-name/>
+            <ppid>CN123456FAN200589031</ppid>
+            <part-number>P2FAN2</part-number>
+            <service-tag/>
+            <service-code/>
+          </mfg-info>
+        </fan-tray>
+        <fan-tray>
+          <fan-tray-id>3</fan-tray-id>
+          <status>up</status>
+          <fan-info>
+            <fan-id>1</fan-id>
+            <fan-status>up</fan-status>
+            <fan-speed-rpm>22215</fan-speed-rpm>
+          </fan-info>
+          <air-flow>NORMAL</air-flow>
+          <mfg-info>
+            <vendor-name/>
+            <product-name/>
+            <hw-version>F03</hw-version>
+            <platform-name/>
+            <ppid>CN123456FAN300589041</ppid>
+            <part-number>P3FAN3</part-number>
+            <service-tag/>
+            <service-code/>
+          </mfg-info>
+        </fan-tray>
+        <fan-tray>
+          <fan-tray-id>4</fan-tray-id>
+          <status>up</status>
+          <fan-info>
+            <fan-id>1</fan-id>
+            <fan-status>up</fan-status>
+            <fan-speed-rpm>22215</fan-speed-rpm>
+          </fan-info>
+          <air-flow>NORMAL</air-flow>
+          <mfg-info>
+            <vendor-name/>
+            <product-name/>
+            <hw-version>F04</hw-version>
+            <platform-name/>
+            <ppid>CN123456FAN400589051</ppid>
+            <part-number>P4FAN4</part-number>
+            <service-tag/>
+            <service-code/>
+          </mfg-info>
+        </fan-tray>
+        <fan-tray>
+          <fan-tray-id>5</fan-tray-id>
+          <status>up</status>
+          <fan-info>
+            <fan-id>1</fan-id>
+            <fan-status>up</fan-status>
+            <fan-speed-rpm>21724</fan-speed-rpm>
+          </fan-info>
+          <air-flow>NORMAL</air-flow>
+          <mfg-info>
+            <vendor-name/>
+            <product-name/>
+            <hw-version>F05</hw-version>
+            <platform-name/>
+            <ppid>CN123456FAN500589061</ppid>
+            <part-number>P5FAN5</part-number>
+            <service-tag/>
+            <service-code/>
+          </mfg-info>
+        </fan-tray>
+      </node>
+    </system>
+    <system-state>
+      <system-status>
+        <hostname>os10</hostname>
+        <uptime>161826</uptime>
+        <date-time>2018-01-12T13:42:36.20+00:00</date-time>
+        <boot-datetime>2018-01-10T16:45:30+00:00</boot-datetime>
+      </system-status>
+    </system-state>
+  </data>
+</rpc-reply>
+

test/units/modules/network/dellos10/fixtures/show_version

@@ -0,0 +1,9 @@
+Dell EMC Networking OS10 Enterprise
+Copyright (c) 1999-2017 by Dell Inc. All Rights Reserved.
+OS Version: 10.4.0E(R1)
+Build Version: 10.4.0E(R1.56)
+Build Time: 2017-12-19T22:11:00-0800
+System Type: S6000-VM
+Architecture: x86_64
+Up Time: 6 days 00:33:35
+

test/units/modules/network/dellos10/fixtures/show_version__display-xml

@@ -0,0 +1,27 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<rpc-reply>
+  <data>
+    <system-state>
+      <system-status>
+        <hostname>os10</hostname>
+        <uptime>162698</uptime>
+        <date-time>2018-01-12T13:57:08.58+00:00</date-time>
+        <boot-datetime>2018-01-10T16:45:30+00:00</boot-datetime>
+      </system-status>
+    </system-state>
+    <system-sw-state>
+      <sw-version>
+        <sw-version>10.4.0E(R1)</sw-version>
+        <sw-name>Enterprise</sw-name>
+        <sw-name-long>Dell EMC Networking OS10 Enterprise</sw-name-long>
+        <sw-platform>S6010-ON</sw-platform>
+        <sw-platform-long>Dell EMC OS10 Enterprise Edition Blueprint 1.0.0</sw-platform-long>
+        <cpu-arch>x86_64</cpu-arch>
+        <sw-build-date>2017-12-14T23:39:27-0800</sw-build-date>
+        <sw-build-version>10.4.0E(R1.55)</sw-build-version>
+        <copyright>Copyright (c) 1999-2017 by Dell Inc. All Rights Reserved.</copyright>
+      </sw-version>
+    </system-sw-state>
+  </data>
+</rpc-reply>
+

test/units/modules/network/dellos10/test_dellos10_command.py

@@ -0,0 +1,110 @@
+# (c) 2016 Red Hat Inc.
+#
+# (c) 2017 Dell EMC.
+#
+# This file is part of Ansible
+#
+# Ansible is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# Ansible is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with Ansible.  If not, see <http://www.gnu.org/licenses/>.
+
+# Make coding more python3-ish
+from __future__ import (absolute_import, division, print_function)
+__metaclass__ = type
+
+import json
+
+from ansible.compat.tests.mock import patch
+from ansible.modules.network.dellos10 import dellos10_command
+from units.modules.utils import set_module_args
+from .dellos10_module import TestDellos10Module, load_fixture
+
+
+class TestDellos10CommandModule(TestDellos10Module):
+
+    module = dellos10_command
+
+    def setUp(self):
+        super(TestDellos10CommandModule, self).setUp()
+
+        self.mock_run_commands = patch('ansible.modules.network.dellos10.dellos10_command.run_commands')
+        self.run_commands = self.mock_run_commands.start()
+
+    def tearDown(self):
+        super(TestDellos10CommandModule, self).tearDown()
+        self.mock_run_commands.stop()
+
+    def load_fixtures(self, commands=None):
+
+        def load_from_file(*args, **kwargs):
+            module, commands = args
+            output = list()
+
+            for item in commands:
+                try:
+                    obj = json.loads(item['command'])
+                    command = obj['command']
+                except ValueError:
+                    command = item['command']
+                filename = str(command).replace(' ', '_')
+                output.append(load_fixture(filename))
+            return output
+
+        self.run_commands.side_effect = load_from_file
+
+    def test_dellos10_command_simple(self):
+        set_module_args(dict(commands=['show version']))
+        result = self.execute_module()
+        self.assertEqual(len(result['stdout']), 1)
+        self.assertTrue(result['stdout'][0].startswith('Dell EMC Networking'))
+
+    def test_dellos10_command_multiple(self):
+        set_module_args(dict(commands=['show version', 'show version']))
+        result = self.execute_module()
+        self.assertEqual(len(result['stdout']), 2)
+        self.assertTrue(result['stdout'][0].startswith('Dell EMC Networking'))
+
+    def test_dellos10_command_wait_for(self):
+        wait_for = 'result[0] contains "Dell EMC"'
+        set_module_args(dict(commands=['show version'], wait_for=wait_for))
+        self.execute_module()
+
+    def test_dellos10_command_wait_for_fails(self):
+        wait_for = 'result[0] contains "test string"'
+        set_module_args(dict(commands=['show version'], wait_for=wait_for))
+        self.execute_module(failed=True)
+        self.assertEqual(self.run_commands.call_count, 10)
+
+    def test_dellos10_command_retries(self):
+        wait_for = 'result[0] contains "test string"'
+        set_module_args(dict(commands=['show version'], wait_for=wait_for, retries=2))
+        self.execute_module(failed=True)
+        self.assertEqual(self.run_commands.call_count, 2)
+
+    def test_dellos10_command_match_any(self):
+        wait_for = ['result[0] contains "Dell EMC"',
+                    'result[0] contains "test string"']
+        set_module_args(dict(commands=['show version'], wait_for=wait_for, match='any'))
+        self.execute_module()
+
+    def test_dellos10_command_match_all(self):
+        wait_for = ['result[0] contains "Dell EMC"',
+                    'result[0] contains "OS10 Enterprise"']
+        set_module_args(dict(commands=['show version'], wait_for=wait_for, match='all'))
+        self.execute_module()
+
+    def test_dellos10_command_match_all_failure(self):
+        wait_for = ['result[0] contains "Dell EMC"',
+                    'result[0] contains "test string"']
+        commands = ['show version', 'show version']
+        set_module_args(dict(commands=commands, wait_for=wait_for, match='all'))
+        self.execute_module(failed=True)

test/units/modules/network/dellos10/test_dellos10_config.py

@@ -0,0 +1,150 @@
+#
+# (c) 2016 Red Hat Inc.
+#
+# (c) 2017 Dell EMC.
+#
+# This file is part of Ansible
+#
+# Ansible is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# Ansible is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with Ansible.  If not, see <http://www.gnu.org/licenses/>.
+
+# Make coding more python3-ish
+from __future__ import (absolute_import, division, print_function)
+__metaclass__ = type
+
+from ansible.compat.tests.mock import patch
+from ansible.modules.network.dellos10 import dellos10_config
+from units.modules.utils import set_module_args
+from .dellos10_module import TestDellos10Module, load_fixture
+
+
+class TestDellos10ConfigModule(TestDellos10Module):
+
+    module = dellos10_config
+
+    def setUp(self):
+        super(TestDellos10ConfigModule, self).setUp()
+
+        self.mock_get_config = patch('ansible.modules.network.dellos10.dellos10_config.get_config')
+        self.get_config = self.mock_get_config.start()
+
+        self.mock_load_config = patch('ansible.modules.network.dellos10.dellos10_config.load_config')
+        self.load_config = self.mock_load_config.start()
+
+        self.mock_run_commands = patch('ansible.modules.network.dellos10.dellos10_config.run_commands')
+        self.run_commands = self.mock_run_commands.start()
+
+    def tearDown(self):
+        super(TestDellos10ConfigModule, self).tearDown()
+        self.mock_get_config.stop()
+        self.mock_load_config.stop()
+        self.mock_run_commands.stop()
+
+    def load_fixtures(self, commands=None):
+        config_file = 'dellos10_config_config.cfg'
+        self.get_config.return_value = load_fixture(config_file)
+        self.load_config.return_value = None
+
+    def test_dellos10_config_unchanged(self):
+        src = load_fixture('dellos10_config_config.cfg')
+        set_module_args(dict(src=src))
+        self.execute_module()
+
+    def test_dellos10_config_src(self):
+        src = load_fixture('dellos10_config_src.cfg')
+        set_module_args(dict(src=src))
+        commands = ['hostname foo', 'interface ethernet1/1/2',
+                    'no ip address']
+        self.execute_module(changed=True, commands=commands)
+
+    def test_dellos10_config_backup(self):
+        set_module_args(dict(backup=True))
+        result = self.execute_module()
+        self.assertIn('__backup__', result)
+
+    def test_dellos10_config_save(self):
+        set_module_args(dict(save=True))
+        self.execute_module(changed=True)
+        self.assertEqual(self.run_commands.call_count, 1)
+        self.assertEqual(self.get_config.call_count, 0)
+        self.assertEqual(self.load_config.call_count, 0)
+        args = self.run_commands.call_args[0][1]
+        self.assertDictContainsSubset({'command': 'copy running-config startup-config'}, args[0])
+#        self.assertIn('copy running-config startup-config\r', args)
+
+    def test_dellos10_config_lines_wo_parents(self):
+        set_module_args(dict(lines=['hostname foo']))
+        commands = ['hostname foo']
+        self.execute_module(changed=True, commands=commands)
+
+    def test_dellos10_config_lines_w_parents(self):
+        set_module_args(dict(lines=['shutdown'], parents=['interface ethernet1/1/2']))
+        commands = ['interface ethernet1/1/2', 'shutdown']
+        self.execute_module(changed=True, commands=commands)
+
+    def test_dellos10_config_before(self):
+        set_module_args(dict(lines=['hostname foo'], before=['snmp-server contact bar']))
+        commands = ['snmp-server contact bar', 'hostname foo']
+        self.execute_module(changed=True, commands=commands, sort=False)
+
+    def test_dellos10_config_after(self):
+        set_module_args(dict(lines=['hostname foo'], after=['snmp-server contact bar']))
+        commands = ['hostname foo', 'snmp-server contact bar']
+        self.execute_module(changed=True, commands=commands, sort=False)
+
+    def test_dellos10_config_before_after_no_change(self):
+        set_module_args(dict(lines=['hostname router'],
+                             before=['snmp-server contact bar'],
+                             after=['snmp-server location chennai']))
+        self.execute_module()
+
+    def test_dellos10_config_config(self):
+        config = 'hostname localhost'
+        set_module_args(dict(lines=['hostname router'], config=config))
+        commands = ['hostname router']
+        self.execute_module(changed=True, commands=commands)
+
+    def test_dellos10_config_replace_block(self):
+        lines = ['description test string', 'test string']
+        parents = ['interface ethernet1/1/2']
+        set_module_args(dict(lines=lines, replace='block', parents=parents))
+        commands = parents + lines
+        self.execute_module(changed=True, commands=commands)
+
+    def test_dellos10_config_match_none(self):
+        lines = ['hostname router']
+        set_module_args(dict(lines=lines, match='none'))
+        self.execute_module(changed=True, commands=lines)
+
+    def test_dellos10_config_match_none(self):
+        lines = ['ip address 1.2.3.4/24', 'description test string']
+        parents = ['interface ethernet1/1/2']
+        set_module_args(dict(lines=lines, parents=parents, match='none'))
+        commands = parents + lines
+        self.execute_module(changed=True, commands=commands, sort=False)
+
+    def test_dellos10_config_match_strict(self):
+        lines = ['ip address 1.2.3.4/24', 'description test string',
+                 'shutdown']
+        parents = ['interface ethernet1/1/2']
+        set_module_args(dict(lines=lines, parents=parents, match='strict'))
+        commands = parents + ['shutdown']
+        self.execute_module(changed=True, commands=commands, sort=False)
+
+    def test_dellos10_config_match_exact(self):
+        lines = ['ip address 1.2.3.4/24', 'description test string',
+                 'shutdown']
+        parents = ['interface ethernet1/1/2']
+        set_module_args(dict(lines=lines, parents=parents, match='exact'))
+        commands = parents + lines
+        self.execute_module(changed=True, commands=commands, sort=False)

test/units/modules/network/dellos10/test_dellos10_facts.py

@@ -0,0 +1,109 @@
+# (c) 2016 Red Hat Inc.
+#
+# (c) 2017 Dell EMC.
+#
+# This file is part of Ansible
+#
+# Ansible is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# Ansible is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with Ansible.  If not, see <http://www.gnu.org/licenses/>.
+
+# Make coding more python3-ish
+from __future__ import (absolute_import, division, print_function)
+__metaclass__ = type
+
+import json
+
+from ansible.compat.tests.mock import patch
+from units.modules.utils import set_module_args
+from .dellos10_module import TestDellos10Module, load_fixture
+from ansible.modules.network.dellos10 import dellos10_facts
+
+
+class TestDellos10Facts(TestDellos10Module):
+
+    module = dellos10_facts
+
+    def setUp(self):
+        super(TestDellos10Facts, self).setUp()
+
+        self.mock_run_command = patch(
+            'ansible.modules.network.dellos10.dellos10_facts.run_commands')
+        self.run_command = self.mock_run_command.start()
+
+    def tearDown(self):
+        super(TestDellos10Facts, self).tearDown()
+
+        self.mock_run_command.stop()
+
+    def load_fixtures(self, commands=None):
+
+        def load_from_file(*args, **kwargs):
+            module, commands = args
+            output = list()
+
+            for item in commands:
+                try:
+                    obj = json.loads(item)
+                    command = obj['command']
+                except ValueError:
+                    command = item
+                if '|' in command:
+                    command = str(command).replace('|', '')
+                filename = str(command).replace(' ', '_')
+                filename = filename.replace('/', '7')
+                output.append(load_fixture(filename))
+            return output
+
+        self.run_command.side_effect = load_from_file
+
+    def test_dellos10_facts_gather_subset_default(self):
+        set_module_args(dict())
+        result = self.execute_module()
+        ansible_facts = result['ansible_facts']
+        self.assertIn('hardware', ansible_facts['ansible_net_gather_subset'])
+        self.assertIn('default', ansible_facts['ansible_net_gather_subset'])
+        self.assertIn('interfaces', ansible_facts['ansible_net_gather_subset'])
+        self.assertEquals('os10', ansible_facts['ansible_net_hostname'])
+        self.assertIn('ethernet1/1/8', ansible_facts['ansible_net_interfaces'].keys())
+        self.assertEquals(7936, ansible_facts['ansible_net_memtotal_mb'])
+        self.assertEquals(5693, ansible_facts['ansible_net_memfree_mb'])
+
+    def test_dellos10_facts_gather_subset_config(self):
+        set_module_args({'gather_subset': 'config'})
+        result = self.execute_module()
+        ansible_facts = result['ansible_facts']
+        self.assertIn('default', ansible_facts['ansible_net_gather_subset'])
+        self.assertIn('config', ansible_facts['ansible_net_gather_subset'])
+        self.assertEquals('os10', ansible_facts['ansible_net_hostname'])
+        self.assertIn('ansible_net_config', ansible_facts)
+
+    def test_dellos10_facts_gather_subset_hardware(self):
+        set_module_args({'gather_subset': 'hardware'})
+        result = self.execute_module()
+        ansible_facts = result['ansible_facts']
+        self.assertIn('default', ansible_facts['ansible_net_gather_subset'])
+        self.assertIn('hardware', ansible_facts['ansible_net_gather_subset'])
+        self.assertEquals('x86_64', ansible_facts['ansible_net_cpu_arch'])
+        self.assertEquals(7936, ansible_facts['ansible_net_memtotal_mb'])
+        self.assertEquals(5693, ansible_facts['ansible_net_memfree_mb'])
+
+    def test_dellos10_facts_gather_subset_interfaces(self):
+        set_module_args({'gather_subset': 'interfaces'})
+        result = self.execute_module()
+        ansible_facts = result['ansible_facts']
+        self.assertIn('default', ansible_facts['ansible_net_gather_subset'])
+        self.assertIn('interfaces', ansible_facts['ansible_net_gather_subset'])
+        self.assertIn('ethernet1/1/8', ansible_facts['ansible_net_interfaces'].keys())
+        self.assertEquals(sorted(['mgmt1/1/1', 'ethernet1/1/4', 'ethernet1/1/2', 'ethernet1/1/3', 'ethernet1/1/1']),
+                          sorted(list(ansible_facts['ansible_net_neighbors'].keys())))
+        self.assertIn('ansible_net_interfaces', ansible_facts)